[XS] Change in coreboot[main]: mb/siemens/mc_ehl: Enable write access for SPD EEPROM on mc_ehl1

[Werner Zeh (Code Review)]

Attention is currently required from: Mario Scheithauer, Paul Menzel.

Werner Zeh has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/79334?usp=email )

Change subject: mb/siemens/mc_ehl: Enable write access for SPD EEPROM on mc_ehl1
......................................................................

Patch Set 1:

(2 comments)

Commit Message:

https://review.coreboot.org/c/coreboot/+/79334/comment/8edcbef9_cf97118a :
PS1, Line 12: On mc_ehl1, memory-down configuration is used and there is no SPD EEPROM
> I’d add a blank line between paragraphs.

OK, will do.

https://review.coreboot.org/c/coreboot/+/79334/comment/609e19c2_a6891fa9 :
PS1, Line 19: Test=Boot into Linux and make sure a write access into the EEPROM is
            : possible.
> Maybe list the command you used to do that.

Not sure if this is helpful here, I have used an own tool which is based on i2c-tools (but is not i2c-tools as it is). And it is, in the end, not the most important information at all, INMO.