Stefan Reinauer (stefan.reinauer@coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/3755
-gerrit
commit 48ab8b077550e93cf9d9b7264c7f47811e40f4a1 Author: Martin Roth martin.roth@se-eng.com Date: Tue Jul 9 21:46:01 2013 -0600
include: Fix spelling
Change-Id: Iadc813bc8208278996b2b1aa20cfb156ec06fac9 Signed-off-by: Martin Roth martin.roth@se-eng.com --- src/include/boot/coreboot_tables.h | 6 +++--- src/include/bootstate.h | 2 +- src/include/cbfs_core.h | 2 +- src/include/cbmem.h | 4 ++-- src/include/console/console.h | 2 +- src/include/console/post_codes.h | 12 ++++++------ src/include/cpu/amd/amdfam10_sysconf.h | 2 +- src/include/cpu/amd/amdk8_sysconf.h | 2 +- src/include/cpu/amd/gx2def.h | 12 ++++++------ src/include/cpu/amd/lxdef.h | 12 ++++++------ src/include/cpu/x86/mtrr.h | 4 ++-- src/include/cpu/x86/smm.h | 4 ++-- src/include/device/dram/ddr3.h | 2 +- src/include/device/pci_def.h | 6 +++--- src/include/ehci.h | 2 +- src/include/pc80/mc146818rtc.h | 2 +- src/include/rmodule.h | 6 +++--- src/include/romstage_handoff.h | 6 +++--- src/include/swab.h | 2 +- src/include/thread.h | 4 ++-- src/include/timer.h | 6 +++--- src/include/uart8250.h | 2 +- 22 files changed, 51 insertions(+), 51 deletions(-)
diff --git a/src/include/boot/coreboot_tables.h b/src/include/boot/coreboot_tables.h index ee1c29f..87819ce 100644 --- a/src/include/boot/coreboot_tables.h +++ b/src/include/boot/coreboot_tables.h @@ -6,11 +6,11 @@ /* The coreboot table information is for conveying information * from the firmware to the loaded OS image. Primarily this * is expected to be information that cannot be discovered by - * other means, such as quering the hardware directly. + * other means, such as querying the hardware directly. * * All of the information should be Position Independent Data. * That is it should be safe to relocated any of the information - * without it's meaning/correctnes changing. For table that + * without it's meaning/correctness changing. For table that * can reasonably be used on multiple architectures the data * size should be fixed. This should ease the transition between * 32 bit and 64 bit architectures etc. @@ -27,7 +27,7 @@ * table entry is required or not. This should remove much of the * long term compatibility burden as table entries which are * irrelevant or have been replaced by better alternatives may be - * dropped. Of course it is polite and expidite to include extra + * dropped. Of course it is polite and expedite to include extra * table entries and be backwards compatible, but it is not required. */
diff --git a/src/include/bootstate.h b/src/include/bootstate.h index af18989..46662d5 100644 --- a/src/include/bootstate.h +++ b/src/include/bootstate.h @@ -148,7 +148,7 @@ struct boot_state_callback { bscb_->arg = arg_
/* The following 2 functions schedule a callback to be called on entry/exit - * to a given state. Note that thare are no ordering guarantees between the + * to a given state. Note that there are no ordering guarantees between the * individual callbacks on a given state. 0 is returned on success < 0 on * error. */ int boot_state_sched_on_entry(struct boot_state_callback *bscb, diff --git a/src/include/cbfs_core.h b/src/include/cbfs_core.h index 20636e2..54e2f60 100644 --- a/src/include/cbfs_core.h +++ b/src/include/cbfs_core.h @@ -56,7 +56,7 @@ #include <stdint.h>
/** These are standard values for the known compression - alogrithms that coreboot knows about for stages and + algorithms that coreboot knows about for stages and payloads. Of course, other CBFS users can use whatever values they want, as long as they understand them. */
diff --git a/src/include/cbmem.h b/src/include/cbmem.h index efb0f90..982a6d8 100644 --- a/src/include/cbmem.h +++ b/src/include/cbmem.h @@ -86,7 +86,7 @@ struct cbmem_entry; * implemented by the board or chipset to define the upper address where * cbmem lives. This address is required to be a 32-bit address. Additionally, * the address needs to be consistent in both romstage and ramstage. The - * dynamic cbmem infrasturue allocates new regions below the last allocated + * dynamic cbmem infrastructure allocates new regions below the last allocated * region. Regions are defined by a cbmem_entry struct that is opaque. Regions * may be removed, but the last one added is the only that can be removed. * @@ -100,7 +100,7 @@ struct cbmem_entry;
#define DYN_CBMEM_ALIGN_SIZE (4096)
-/* Initialze cbmem to be empty. */ +/* Initialize cbmem to be empty. */ void cbmem_initialize_empty(void);
/* Return the top address for dynamic cbmem. The address returned needs to diff --git a/src/include/console/console.h b/src/include/console/console.h index 2f5f18e..7a55ae1 100644 --- a/src/include/console/console.h +++ b/src/include/console/console.h @@ -60,7 +60,7 @@ extern struct console_driver econsole_drivers[]; extern int console_loglevel; #else /* __PRE_RAM__ */ -/* Using a global varible can cause problems when we reset the stack +/* Using a global variable can cause problems when we reset the stack * from cache as ram to ram. If we make this a define USE_SHARED_STACK * we could use the same code on all architectures. */ diff --git a/src/include/console/post_codes.h b/src/include/console/post_codes.h index ba6c916..4dc3d37 100644 --- a/src/include/console/post_codes.h +++ b/src/include/console/post_codes.h @@ -24,7 +24,7 @@ * This aims to be a central point for POST codes used throughout coreboot. * All POST codes should be declared here as macros, and post_code() should * be used with the macros instead of hardcoded values. This allows us to - * quicly reference POST codes when nothing is working + * quickly reference POST codes when nothing is working * * The format for a POST code macro is * #define POST_WHAT_WE_COMMUNICATE_IS_HAPPENING_WHEN_THIS_CODE_IS_POSTED @@ -92,8 +92,8 @@ /** * \brief Entry into coreboot in ram stage main() * - * This is the first call in ram stage main(). If this code is POSTed, then - * ramstage has succesfully loaded and started executing. + * This is the first call in hardwaremain.c. If this code is POSTed, then + * ramstage has successfully loaded and started executing. */ #define POST_ENTRY_RAMSTAGE 0x80
@@ -107,7 +107,7 @@ /** * \brief Console boot message succeeded * - * First console message has been succesfully sent through the console backend + * First console message has been successfully sent through the console backend * driver. */ #define POST_CONSOLE_BOOT_MSG 0x40 @@ -129,7 +129,7 @@ /** * \brief Devices have been configured * - * Device confgration has completed. + * Device configuration has completed. */ #define POST_DEVICE_CONFIGURATION_COMPLETE 0x88
@@ -207,7 +207,7 @@ /* * The following POST codes are taken from src/include/cpu/amd/geode_post_code.h * They overlap with previous codes, and most are not even used - * Some maiboards still require them, but they are deprecated. We want to consolidate + * Some mainboards still require them, but they are deprecated. We want to consolidate * our own POST code structure with the codes above. * * standard AMD post definitions for the AMD Geode diff --git a/src/include/cpu/amd/amdfam10_sysconf.h b/src/include/cpu/amd/amdfam10_sysconf.h index 2f08fd8..baba6ce 100644 --- a/src/include/cpu/amd/amdfam10_sysconf.h +++ b/src/include/cpu/amd/amdfam10_sysconf.h @@ -64,7 +64,7 @@ struct amdfam10_sysconf_t { unsigned lift_bsp_apicid; int apicid_offset;
- void *mb; // pointer for mb releated struct + void *mb; // pointer for mb related struct
};
diff --git a/src/include/cpu/amd/amdk8_sysconf.h b/src/include/cpu/amd/amdk8_sysconf.h index 3ae35fd..87bd4d5 100644 --- a/src/include/cpu/amd/amdk8_sysconf.h +++ b/src/include/cpu/amd/amdk8_sysconf.h @@ -19,7 +19,7 @@ struct amdk8_sysconf_t { unsigned lift_bsp_apicid; int apicid_offset;
- void *mb; // pointer for mb releated struct + void *mb; // pointer for mb related struct
};
diff --git a/src/include/cpu/amd/gx2def.h b/src/include/cpu/amd/gx2def.h index ee55c2f..beb4c65 100644 --- a/src/include/cpu/amd/gx2def.h +++ b/src/include/cpu/amd/gx2def.h @@ -399,12 +399,12 @@ #define SC 5 /* Swiss 0xCeese - maps a 256K region in to 16K 0xcunks. Set W/R */ #define BMIO 6 /* Base Mask IO */ #define SCIO 7 /* Swiss 0xCeese IO */ -#define SC_SHADOW 8 /* Special marker for Shadow SC descriptors so setShadow proc is independant of CPU */ -#define R_SYSMEM 9 /* Special marker for SYSMEM R descriptors so GLIUInit proc is independant of CPU */ -#define BMO_SMM 10 /* Specail marker for SMM */ -#define BM_SMM 11 /* Specail marker for SMM */ -#define BMO_DMM 12 /* Specail marker for DMM */ -#define BM_DMM 13 /* Specail marker for DMM */ +#define SC_SHADOW 8 /* Special marker for Shadow SC descriptors so setShadow proc is independent of CPU */ +#define R_SYSMEM 9 /* Special marker for SYSMEM R descriptors so GLIUInit proc is independent of CPU */ +#define BMO_SMM 10 /* Special marker for SMM */ +#define BM_SMM 11 /* Special marker for SMM */ +#define BMO_DMM 12 /* Special marker for DMM */ +#define BM_DMM 13 /* Special marker for DMM */ #define RO_FB 14 /* special for Frame buffer. */ #define R_FB 15 /* special for FB. */ #define OTHER 0x0FE /* Special marker for other */ diff --git a/src/include/cpu/amd/lxdef.h b/src/include/cpu/amd/lxdef.h index 4eee156..da26895 100644 --- a/src/include/cpu/amd/lxdef.h +++ b/src/include/cpu/amd/lxdef.h @@ -533,12 +533,12 @@ #define SC 5 /* Swiss 0xCeese - maps a 256K region in to 16K 0xcunks. Set W/R*/ #define BMIO 6 /* Base Mask IO*/ #define SCIO 7 /* Swiss 0xCeese IO*/ -#define SC_SHADOW 8 /* Special marker for Shadow SC descriptors so setShadow proc is independant of CPU*/ -#define R_SYSMEM 9 /* Special marker for SYSMEM R descriptors so GLIUInit proc is independant of CPU*/ -#define BMO_SMM 10 /* Specail marker for SMM*/ -#define BM_SMM 11 /* Specail marker for SMM*/ -#define BMO_DMM 12 /* Specail marker for DMM*/ -#define BM_DMM 13 /* Specail marker for DMM*/ +#define SC_SHADOW 8 /* Special marker for Shadow SC descriptors so setShadow proc is independent of CPU*/ +#define R_SYSMEM 9 /* Special marker for SYSMEM R descriptors so GLIUInit proc is independent of CPU*/ +#define BMO_SMM 10 /* Special marker for SMM*/ +#define BM_SMM 11 /* Special marker for SMM*/ +#define BMO_DMM 12 /* Special marker for DMM*/ +#define BM_DMM 13 /* Special marker for DMM*/ #define RO_FB 14 /* special for Frame buffer.*/ #define R_FB 15 /* special for FB.*/ #define OTHER 0x0FE /* Special marker for other*/ diff --git a/src/include/cpu/x86/mtrr.h b/src/include/cpu/x86/mtrr.h index 38c3f7c..017a77e 100644 --- a/src/include/cpu/x86/mtrr.h +++ b/src/include/cpu/x86/mtrr.h @@ -47,14 +47,14 @@ * x86_setup_fixed_mtrrs_no_enable() then enable_fixed_mtrrs() (equivalent * of x86_setup_fixed_mtrrs()) then x86_setup_var_mtrrs(). If the callers * want to call the components of x86_setup_mtrrs() because of other - * rquirements the ordering should still preserved. + * requirements the ordering should still preserved. * 2. enable_fixed_mtrr() will enable both variable and fixed MTRRs because * of the nature of the global MTRR enable flag. Therefore, all direct * or indirect callers of enable_fixed_mtrr() should ensure that the * variable MTRR MSRs do not contain bad ranges. * 3. If CONFIG_CACHE_ROM is selected an MTRR is allocated for enabling * the caching of the ROM. However, it is set to uncacheable (UC). It - * is the responsiblity of the caller to enable it by calling + * is the responsibility of the caller to enable it by calling * x86_mtrr_enable_rom_caching(). */ void x86_setup_mtrrs(void); diff --git a/src/include/cpu/x86/smm.h b/src/include/cpu/x86/smm.h index df7e3de..cacbff0 100644 --- a/src/include/cpu/x86/smm.h +++ b/src/include/cpu/x86/smm.h @@ -423,7 +423,7 @@ struct smm_runtime { u32 save_state_size; /* The apic_id_to_cpu provides a mapping from APIC id to cpu number. * The cpu number is indicated by the index into the array by matching - * the deafult APIC id and value at the index. The stub loader + * the default APIC id and value at the index. The stub loader * initializes this array with a 1:1 mapping. If the APIC ids are not * contiguous like the 1:1 mapping it is up to the caller of the stub * loader to adjust this mapping. */ @@ -446,7 +446,7 @@ void *smm_get_save_state(int cpu); #else /* SMM Module Loading API */
-/* Ths smm_loader_params structure provides direction to the SMM loader: +/* The smm_loader_params structure provides direction to the SMM loader: * - stack_top - optional external stack provided to loader. It must be at * least per_cpu_stack_size * num_concurrent_stacks in size. * - per_cpu_stack_size - stack size per cpu for smm modules. diff --git a/src/include/device/dram/ddr3.h b/src/include/device/dram/ddr3.h index 69c072b..53a42ee 100644 --- a/src/include/device/dram/ddr3.h +++ b/src/include/device/dram/ddr3.h @@ -63,7 +63,7 @@
/* * Module type (byte 3, bits 3:0) of SPD - * This definition is specific to DDR3. DDR2 SPDs have a diferent structure. + * This definition is specific to DDR3. DDR2 SPDs have a different structure. */ enum spd_dimm_type { SPD_DIMM_TYPE_UNDEFINED = 0x00, diff --git a/src/include/device/pci_def.h b/src/include/device/pci_def.h index 58a7321..ac20659 100644 --- a/src/include/device/pci_def.h +++ b/src/include/device/pci_def.h @@ -177,7 +177,7 @@ #define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */ #define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */ #define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */ -#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */ +#define PCI_CAP_ID_MSI 0x05 /* Message Signaled Interrupts */ #define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */ #define PCI_CAP_ID_PCIX 0x07 /* PCIX */ #define PCI_CAP_ID_HT 0x08 /* Hypertransport */ @@ -208,7 +208,7 @@ #define PCI_PM_PMC 2 /* PM Capabilities Register */ #define PCI_PM_CAP_VER_MASK 0x0007 /* Version */ #define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */ -#define PCI_PM_CAP_AUX_POWER 0x0010 /* Auxilliary power support */ +#define PCI_PM_CAP_AUX_POWER 0x0010 /* Auxiliary power support */ #define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */ #define PCI_PM_CAP_D1 0x0200 /* D1 power state support */ #define PCI_PM_CAP_D2 0x0400 /* D2 power state support */ @@ -255,7 +255,7 @@ #define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */ #define PCI_SID_CHASSIS_NR 3 /* Chassis Number */
-/* Message Signalled Interrupts registers */ +/* Message Signaled Interrupts registers */
#define PCI_MSI_FLAGS 2 /* Various flags */ #define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */ diff --git a/src/include/ehci.h b/src/include/ehci.h index b096f42..f920352 100644 --- a/src/include/ehci.h +++ b/src/include/ehci.h @@ -161,7 +161,7 @@ struct ehci_regs { #define USBMODE_CM_IDLE (0<<0) /* idle state */
/* Moorestown has some non-standard registers, partially due to the fact that - * its EHCI controller has both TT and LPM support. HOSTPCx are extentions to + * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to * PORTSCx */ #define HOSTPC0 0x84 /* HOSTPC extension */ diff --git a/src/include/pc80/mc146818rtc.h b/src/include/pc80/mc146818rtc.h index 29e0348..170a433 100644 --- a/src/include/pc80/mc146818rtc.h +++ b/src/include/pc80/mc146818rtc.h @@ -22,7 +22,7 @@
/* update-in-progress - set to "1" 244 microsecs before RTC goes off the bus, * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete, - * totalling to a max high interval of 2.228 ms. + * totaling to a max high interval of 2.228 ms. */ # define RTC_UIP 0x80 # define RTC_DIV_CTL 0x70 diff --git a/src/include/rmodule.h b/src/include/rmodule.h index 35a82c1..247711a 100644 --- a/src/include/rmodule.h +++ b/src/include/rmodule.h @@ -95,18 +95,18 @@ struct rmodule_header { u32 relocations_begin_offset; u32 relocations_end_offset; /* The starting address of the linked program. This address is vital - * for determining relocation offsets as the reloction info and other + * for determining relocation offsets as the relocation info and other * symbols (bss, entry point) need this value as a basis to calculate * the offsets. */ u32 module_link_start_address; /* The module_program_size is the size of memory used while running - * the program. The program is assumed to consume a contiguos amount + * the program. The program is assumed to consume a contiguous amount * of memory. */ u32 module_program_size; /* This is program's execution entry point. */ u32 module_entry_point; - /* Optional paramter structure that can be used to pass data into + /* Optional parameter structure that can be used to pass data into * the module. */ u32 parameters_begin; u32 parameters_end; diff --git a/src/include/romstage_handoff.h b/src/include/romstage_handoff.h index 3152fb2..699838a 100644 --- a/src/include/romstage_handoff.h +++ b/src/include/romstage_handoff.h @@ -23,12 +23,12 @@ #include <string.h> #include <cbmem.h>
-/* It is the chipset's responsbility for maintaining the integrity of this +/* It is the chipset's responsibility for maintaining the integrity of this * structure in CBMEM. For instance, if chipset code adds this structure * using the CBMEM_ID_ROMSTAGE_INFO id it needs to ensure it doesn't clobber * fields it doesn't own. */ struct romstage_handoff { - /* Inidicate if the current boot is an S3 resume. If + /* Indicate if the current boot is an S3 resume. If * CONFIG_RELOCTABLE_RAMSTAGE is enabled the chipset code is * responsible for initializing this variable. Otherwise, ramstage * will be re-loaded from cbfs (which can be slower since it lives @@ -42,7 +42,7 @@ struct romstage_handoff {
#if defined(__PRE_RAM__) /* The romstage_handoff_find_or_add() function provides the necessary logic - * for initializng the romstage_handoff structure in cbmem. Different components + * for initializing the romstage_handoff structure in cbmem. Different components * of the romstage may be responsible for setting up different fields. Therefore * that same logic flow should be used for allocating and initializing the * structure. A newly allocated structure will be memset to 0. */ diff --git a/src/include/swab.h b/src/include/swab.h index c5e4370..8a7daba 100644 --- a/src/include/swab.h +++ b/src/include/swab.h @@ -10,7 +10,7 @@ * separated swab functions from cpu_to_XX, * to clean up support for bizarre-endian architectures. * - * See asm-i386/byteorder.h and suches for examples of how to provide + * See asm-i386/byteorder.h and such for examples of how to provide * architecture-dependent optimized versions * */ diff --git a/src/include/thread.h b/src/include/thread.h index 148c448..0522337 100644 --- a/src/include/thread.h +++ b/src/include/thread.h @@ -43,7 +43,7 @@ void threads_initialize(void); * current state in the boot state machine until it is complete. */ int thread_run(void (*func)(void *), void *arg); /* thread_run_until is the same as thread_run() except that it blocks state - * transitions from occuring in the (state, seq) pair of the boot state + * transitions from occurring in the (state, seq) pair of the boot state * machine. */ int thread_run_until(void (*func)(void *), void *arg, boot_state_t state, boot_state_sequence_t seq); @@ -52,7 +52,7 @@ int thread_run_until(void (*func)(void *), void *arg, int thread_yield_microseconds(unsigned microsecs);
/* Allow and prevent thread cooperation on current running thread. By default - * all threads are marked to be cooperative. That means a thread can yeild + * all threads are marked to be cooperative. That means a thread can yield * to another thread at a pre-determined switch point. Current there is * only a single place where switching may occur: a call to udelay(). */ void thread_cooperate(void); diff --git a/src/include/timer.h b/src/include/timer.h index 40ac367..06128ce 100644 --- a/src/include/timer.h +++ b/src/include/timer.h @@ -67,13 +67,13 @@ int timers_run(void); * 0 returned on success, < 0 on error. */ int timer_sched_callback(struct timeout_callback *tocb, unsigned long us);
-/* Add microseconds to an absoute time. */ +/* Add microseconds to an absolute time. */ static inline void mono_time_add_usecs(struct mono_time *mt, long us) { mt->microseconds += us; }
-/* Add milliseconds to an absoute time. */ +/* Add milliseconds to an absolute time. */ static inline void mono_time_add_msecs(struct mono_time *mt, long ms) { mono_time_add_usecs(mt, ms * USECS_PER_MSEC); @@ -85,7 +85,7 @@ static inline void mono_time_add_rela_time(struct mono_time *mt, mono_time_add_usecs(mt, t->microseconds); }
-/* Compare two absoluted times: Return -1, 0, or 1 if t1 is <, =, or > t2, +/* Compare two absolute times: Return -1, 0, or 1 if t1 is <, =, or > t2, * respectively. */ static inline int mono_time_cmp(const struct mono_time *t1, const struct mono_time *t2) diff --git a/src/include/uart8250.h b/src/include/uart8250.h index d42e822..e6a318a 100644 --- a/src/include/uart8250.h +++ b/src/include/uart8250.h @@ -63,7 +63,7 @@ #define UART_LCR_WLS_7 0x02 /* 7 bit character length */ #define UART_LCR_WLS_8 0x03 /* 8 bit character length */ #define UART_LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */ -#define UART_LCR_PEN 0x08 /* Parity eneble */ +#define UART_LCR_PEN 0x08 /* Parity enable */ #define UART_LCR_EPS 0x10 /* Even Parity Select */ #define UART_LCR_STKP 0x20 /* Stick Parity */ #define UART_LCR_SBRK 0x40 /* Set Break */
-
Stefan Reinauer