Ben Gardner (gardner.ben@gmail.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/13907
-gerrit
commit ffda10dcd50472dec5e2144648d95f2e6301051d Author: Ben Gardner gardner.ben@gmail.com Date: Fri Mar 4 16:42:08 2016 -0600
intel/fsp_baytrail: use 20K PU/PD for GPIO
The E3800 datasheet only lists 2K and 20K Pull Strength for the GPIOs. The 10K and 40K values map to 'reserved'.
This brings the code closer to the non-FSP baytrail.
Change-Id: I77078bdbbccc00976525dc43fb98f5b2e79eae03 Signed-off-by: Ben Gardner gardner.ben@gmail.com --- src/soc/intel/fsp_baytrail/include/soc/gpio.h | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/src/soc/intel/fsp_baytrail/include/soc/gpio.h b/src/soc/intel/fsp_baytrail/include/soc/gpio.h index e1164a3..165443e 100644 --- a/src/soc/intel/fsp_baytrail/include/soc/gpio.h +++ b/src/soc/intel/fsp_baytrail/include/soc/gpio.h @@ -181,14 +181,14 @@ .is_gpio = 1 }
#define GPIO_INPUT_NOPU \ - { .pad_conf0 = PAD_PU_10K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \ + { .pad_conf0 = PAD_PU_20K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \ .pad_conf1 = PAD_CONFIG1_DEFAULT, \ .pad_val = PAD_VAL_INPUT, \ .use_sel = GPIO_USE_MMIO, \ .is_gpio = 1 }
#define GPIO_INPUT_LEGACY_NOPU \ - { .pad_conf0 = PAD_PU_10K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \ + { .pad_conf0 = PAD_PU_20K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \ .pad_conf1 = PAD_CONFIG1_DEFAULT, \ .pad_val = PAD_VAL_INPUT, \ .use_sel = GPIO_USE_LEGACY, \ @@ -197,7 +197,7 @@
/* Direct / dedicated IRQ input - pass signal directly to apic */ #define GPIO_DIRQ \ - { .pad_conf0 = PAD_PU_10K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \ + { .pad_conf0 = PAD_PU_20K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \ | PAD_FUNC0 | PAD_IRQ_EN | PAD_TPE_IRQ | PAD_LEVEL_IRQ, \ .pad_conf1 = PAD_CONFIG1_DEFAULT, \ .pad_val = PAD_VAL_INPUT, } @@ -247,13 +247,13 @@ .pad_val = PAD_VAL_DEFAULT }
/* Default functional configs -- no PU */ -#define GPIO_FUNC0 GPIO_FUNC(0, PULL_DISABLE, 10K) -#define GPIO_FUNC1 GPIO_FUNC(1, PULL_DISABLE, 10K) -#define GPIO_FUNC2 GPIO_FUNC(2, PULL_DISABLE, 10K) -#define GPIO_FUNC3 GPIO_FUNC(3, PULL_DISABLE, 10K) -#define GPIO_FUNC4 GPIO_FUNC(4, PULL_DISABLE, 10K) -#define GPIO_FUNC5 GPIO_FUNC(5, PULL_DISABLE, 10K) -#define GPIO_FUNC6 GPIO_FUNC(6, PULL_DISABLE, 10K) +#define GPIO_FUNC0 GPIO_FUNC(0, PULL_DISABLE, 20K) +#define GPIO_FUNC1 GPIO_FUNC(1, PULL_DISABLE, 20K) +#define GPIO_FUNC2 GPIO_FUNC(2, PULL_DISABLE, 20K) +#define GPIO_FUNC3 GPIO_FUNC(3, PULL_DISABLE, 20K) +#define GPIO_FUNC4 GPIO_FUNC(4, PULL_DISABLE, 20K) +#define GPIO_FUNC5 GPIO_FUNC(5, PULL_DISABLE, 20K) +#define GPIO_FUNC6 GPIO_FUNC(6, PULL_DISABLE, 20K)
/* ACPI GPIO routing. Assume everything is externally pulled and negative edge * triggered. SCI implies WAKE, but WAKE doesn't imply SCI. */ @@ -292,9 +292,9 @@ /* Common default GPIO settings */ #define GPIO_INPUT GPIO_INPUT_NOPU #define GPIO_INPUT_LEGACY GPIO_INPUT_LEGACY_NOPU -#define GPIO_INPUT_PU GPIO_INPUT_PU_10K -#define GPIO_INPUT_PD GPIO_INPUT_PD_10K -#define GPIO_NC GPIO_INPUT_PU_10K +#define GPIO_INPUT_PU GPIO_INPUT_PU_20K +#define GPIO_INPUT_PD GPIO_INPUT_PD_20K +#define GPIO_NC GPIO_INPUT_PU_20K #define GPIO_DEFAULT GPIO_FUNC0
/* 16 DirectIRQs per supported bank */
-
Ben Gardner