Change in coreboot[master]: google: Use proper ACPI ID for Semtech chips: STH

[Gwendal Grignou (Code Review)]

Gwendal Grignou has uploaded this change for review. ( https://review.coreboot.org/27347

Change subject: google: Use proper ACPI ID for Semtech chips: STH
......................................................................

google: Use proper ACPI ID for Semtech chips: STH

Change-Id: I85cd567a923cccd2504f351aae276b5f0d9db4de
Signed-off-by: Gwendal Grignou 
---
M src/mainboard/google/poppy/variants/nautilus/devicetree.cb
M src/mainboard/google/zoombini/variants/meowth/devicetree.cb
2 files changed, 3 insertions(+), 3 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/47/27347/1

diff --git a/src/mainboard/google/poppy/variants/nautilus/devicetree.cb b/src/mainboard/google/poppy/variants/nautilus/devicetree.cb
index 68246c6..b2617e5 100644
--- a/src/mainboard/google/poppy/variants/nautilus/devicetree.cb
+++ b/src/mainboard/google/poppy/variants/nautilus/devicetree.cb
@@ -330,7 +330,7 @@
    	end # I2C #1
    	device pci 15.2 on
    		chip drivers/i2c/generic
-				register "hid" = ""SX9321""
+				register "hid" = ""STH9321""
    			register "name" = ""SEMTECH SX9321""
    			register "desc" = ""SAR Proximity Sensor""
    			register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_A18_IRQ)"
diff --git a/src/mainboard/google/zoombini/variants/meowth/devicetree.cb b/src/mainboard/google/zoombini/variants/meowth/devicetree.cb
index adeedea..bbff695 100644
--- a/src/mainboard/google/zoombini/variants/meowth/devicetree.cb
+++ b/src/mainboard/google/zoombini/variants/meowth/devicetree.cb
@@ -107,7 +107,7 @@
    	end # I2C #0
    	device pci 15.1 on
    		chip drivers/i2c/generic
-				register "hid" = ""SX9310""
+				register "hid" = ""STH9310""
    			register "name" = ""SEMTECH SX9310""
    			register "desc" = ""Left SAR Proximity Sensor""
    			register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C3_IRQ)"
@@ -145,7 +145,7 @@
    	device pci 19.0 on  end # I2C #4
    	device pci 19.1 on
    		chip drivers/i2c/generic
-				register "hid" = ""SX9310""
+				register "hid" = ""STH9310""
    			register "name" = ""SEMTECH SX9310""
    			register "desc" = ""Right SAR Proximity Sensor""
    			register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C4_IRQ)"