Aamir Bohra has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/29777
Change subject: mb/intel/icelake_rvp: Add support for ALPS touchpad ......................................................................
mb/intel/icelake_rvp: Add support for ALPS touchpad
Change-Id: I4085b70560e2840c71b989348f56ca907e7cea4b Signed-off-by: Aamir Bohra aamir.bohra@intel.com --- M src/mainboard/intel/icelake_rvp/variants/icl_u/devicetree.cb M src/mainboard/intel/icelake_rvp/variants/icl_y/devicetree.cb 2 files changed, 18 insertions(+), 2 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/77/29777/1
diff --git a/src/mainboard/intel/icelake_rvp/variants/icl_u/devicetree.cb b/src/mainboard/intel/icelake_rvp/variants/icl_u/devicetree.cb index a57d91a..962a0cf 100644 --- a/src/mainboard/intel/icelake_rvp/variants/icl_u/devicetree.cb +++ b/src/mainboard/intel/icelake_rvp/variants/icl_u/devicetree.cb @@ -106,7 +106,15 @@ device pci 14.3 on end # CNVi wifi end device pci 14.5 on end # SDCard - device pci 15.0 on end # I2C #0 + device pci 15.0 on + chip drivers/i2c/hid + register "generic.hid" = ""ALPS0000"" + register "generic.desc" = ""Touchpad"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C8_IRQ)" + register "hid_desc_reg_offset" = "0x20" + device i2c 2C on end + end + end # I2C 0 device pci 15.1 on end # I2C #1 device pci 15.2 off end # I2C #2 device pci 15.3 on end # I2C #3 diff --git a/src/mainboard/intel/icelake_rvp/variants/icl_y/devicetree.cb b/src/mainboard/intel/icelake_rvp/variants/icl_y/devicetree.cb index f8fbfb4..f3e74b5 100644 --- a/src/mainboard/intel/icelake_rvp/variants/icl_y/devicetree.cb +++ b/src/mainboard/intel/icelake_rvp/variants/icl_y/devicetree.cb @@ -90,7 +90,15 @@ device pci 14.3 on end # CNVi wifi end device pci 14.5 on end # SDCard - device pci 15.0 on end # I2C 0 + device pci 15.0 on + chip drivers/i2c/hid + register "generic.hid" = ""ALPS0000"" + register "generic.desc" = ""Touchpad"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C8_IRQ)" + register "hid_desc_reg_offset" = "0x20" + device i2c 2C on end + end + end # I2C 0 device pci 15.1 on end # I2C #1 device pci 15.2 off end # I2C #2 device pci 15.3 on end # I2C #3