[XS] Change in coreboot[main]: mb/google/octopus: Remove blank lines before '}' and after '{'

[Elyes Haouas (Code Review)]

Elyes Haouas has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/81482?usp=email )

Change subject: mb/google/octopus: Remove blank lines before '}' and after '{'
......................................................................

mb/google/octopus: Remove blank lines before '}' and after '{'

Change-Id: If54b24828d02a4937c99e9e791c3cf49e18edd5e
Signed-off-by: Elyes Haouas 
---
M src/mainboard/google/octopus/smihandler.c
M src/mainboard/google/octopus/variants/bloog/gpio.c
M src/mainboard/google/octopus/variants/fleex/gpio.c
3 files changed, 0 insertions(+), 3 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/82/81482/1

diff --git a/src/mainboard/google/octopus/smihandler.c b/src/mainboard/google/octopus/smihandler.c
index 4400342..5d07d5b 100644
--- a/src/mainboard/google/octopus/smihandler.c
+++ b/src/mainboard/google/octopus/smihandler.c
@@ -62,7 +62,6 @@

void power_off_lte_module(void)
 {
-
    const struct gpio_with_delay lte_power_off_gpios[] = {
    	{
    		GPIO_161, /* AVS_I2S1_MCLK -- PLT_RST_LTE_L */
diff --git a/src/mainboard/google/octopus/variants/bloog/gpio.c b/src/mainboard/google/octopus/variants/bloog/gpio.c
index f77d429..4e09297 100644
--- a/src/mainboard/google/octopus/variants/bloog/gpio.c
+++ b/src/mainboard/google/octopus/variants/bloog/gpio.c
@@ -5,7 +5,6 @@
 #include <gpio.h>

static const struct pad_config default_override_table[] = {
-
    PAD_NC(GPIO_50, UP_20K), /* PCH_I2C_PEN_SDA -- unused */
    PAD_NC(GPIO_51, UP_20K), /* PCH_I2C_PEN_SCL -- unused */
    PAD_NC(GPIO_52, UP_20K), /* PCH_I2C_P_SENSOR_SDA -- unused */
diff --git a/src/mainboard/google/octopus/variants/fleex/gpio.c b/src/mainboard/google/octopus/variants/fleex/gpio.c
index 0b561d8..f2e6475 100644
--- a/src/mainboard/google/octopus/variants/fleex/gpio.c
+++ b/src/mainboard/google/octopus/variants/fleex/gpio.c
@@ -5,7 +5,6 @@
 #include <gpio.h>

static const struct pad_config default_override_table[] = {
-
    PAD_NC(GPIO_52, UP_20K),
    PAD_NC(GPIO_53, UP_20K),
    /* UART2-CTS_B -- EN_PP3300_DX_LTE_SOC */