[S] Change in coreboot[master]: superio/fintek/f71808a/f71808a_hwm.c: Fix writing to hardware monitor...

[Ravi Mistry (Code Review)]

Ravi Mistry has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/69260 )

Change subject: superio/fintek/f71808a/f71808a_hwm.c: Fix writing to hardware monitor registers
......................................................................

superio/fintek/f71808a/f71808a_hwm.c: Fix writing to hardware monitor registers

Fix writing to the hardware monitor registers on Fintek F71808A Super I/O.

The HWM port is +5 to the base address stored in LDN 0x4 at index 0x60/0x61.

Referred to util/superiotool/fintek.c.

Tested on a HP 500-319na (Memphis-S / IPM87-MP).

Signed-off-by: Ravi Mistry 
Change-Id: I13e91e9900cfd151d143af4530d18ece2dbbe647
---
M src/superio/fintek/f71808a/f71808a_hwm.c
1 file changed, 19 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/60/69260/1

diff --git a/src/superio/fintek/f71808a/f71808a_hwm.c b/src/superio/fintek/f71808a/f71808a_hwm.c
index 2d7fcc2..541fbdd 100644
--- a/src/superio/fintek/f71808a/f71808a_hwm.c
+++ b/src/superio/fintek/f71808a/f71808a_hwm.c
@@ -49,6 +49,7 @@

const struct superio_fintek_f71808a_config *reg = dev->chip_info;
    u16 port = res->base;
+	port = port + 5;

pnp_enter_conf_mode(dev);