Change in coreboot[master]: vendorcode/intel/skykabylake: change GPI RXEVCFG default to ...

[Kane Chen (Code Review)]

Hello build bot (Jenkins),

I'd like you to reexamine a change.  Please visit

https://review.coreboot.org/19992

to look at the new patch set (#2).

Change subject: vendorcode/intel/skykabylake: change GPI RXEVCFG default to edge
......................................................................

vendorcode/intel/skykabylake: change GPI RXEVCFG default to edge

The original gpio macro sets GPI or native pin RXEVCFG to LEVEL trigger.
This would cause unused interrupts happen while OS is trying to enable
GPIO interrupt and set RXEVCFG to edge trigger for SD_CD pin.
By changing GPI RXEVCFG default to edge can prevent unused interrupts
happen while OS is setting gpio RXEVCFG from level to edge.

BUG=b:62067569
TEST=checked unused interrupt on SD_CD dose not happen after s3 resume

Change-Id: I42b9cd80b494e24c55b97e54cdf59bfd24dd9054
Signed-off-by: Kane Chen 
---
M src/soc/intel/skylake/include/soc/gpio.h
1 file changed, 5 insertions(+), 5 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/92/19992/2