Change in ...coreboot[master]: vendorcode/intel/fsp/fsp2_0/cml: Add FSP header files for Cometlake
Subrata Banik has submitted this change and it was merged. ( https://review.coreboot.org/c/coreboot/+/31529 )
Change subject: vendorcode/intel/fsp/fsp2_0/cml: Add FSP header files for Cometlake ......................................................................
vendorcode/intel/fsp/fsp2_0/cml: Add FSP header files for Cometlake
Adding header files for FSP for cometlake platform version 1034
Change-Id: I734316445dda5b1feb4098ce3c58b6dd8ce2d272 Signed-off-by: Maulik V Vaghela maulik.v.vaghela@intel.com Reviewed-on: https://review.coreboot.org/c/31529 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Rizwan Qureshi rizwan.qureshi@intel.com Reviewed-by: Subrata Banik subrata.banik@intel.com Reviewed-by: Aamir Bohra aamir.bohra@intel.com --- A src/vendorcode/intel/fsp/fsp2_0/cometlake/FirmwareVersionInfoHob.h A src/vendorcode/intel/fsp/fsp2_0/cometlake/FspUpd.h A src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h A src/vendorcode/intel/fsp/fsp2_0/cometlake/FspsUpd.h A src/vendorcode/intel/fsp/fsp2_0/cometlake/FsptUpd.h A src/vendorcode/intel/fsp/fsp2_0/cometlake/MemInfoHob.h 6 files changed, 6,881 insertions(+), 0 deletions(-)
Approvals: build bot (Jenkins): Verified Rizwan Qureshi: Looks good to me, approved Subrata Banik: Looks good to me, approved Aamir Bohra: Looks good to me, approved
Objections: Nico Huber: I would prefer that you didn't submit this Patrick Rudolph: I would prefer that you didn't submit this
diff --git a/src/vendorcode/intel/fsp/fsp2_0/cometlake/FirmwareVersionInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/cometlake/FirmwareVersionInfoHob.h new file mode 100644 index 0000000..98a16d7 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/cometlake/FirmwareVersionInfoHob.h @@ -0,0 +1,68 @@ +/** @file + Header file for Firmware Version Information + + @copyright + Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR> + + This program and the accompanying materials are licensed and made available under + the terms and conditions of the BSD License which accompanies this distribution. + The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef _FIRMWARE_VERSION_INFO_HOB_H_ +#define _FIRMWARE_VERSION_INFO_HOB_H_ + +#include <Uefi/UefiMultiPhase.h> +#include <Pi/PiBootMode.h> +#include <Pi/PiHob.h> + +#pragma pack(1) +/// +/// Firmware Version Structure +/// +typedef struct { + UINT8 MajorVersion; + UINT8 MinorVersion; + UINT8 Revision; + UINT16 BuildNumber; +} FIRMWARE_VERSION; + +/// +/// Firmware Version Information Structure +/// +typedef struct { + UINT8 ComponentNameIndex; ///< Offset 0 Index of Component Name + UINT8 VersionStringIndex; ///< Offset 1 Index of Version String + FIRMWARE_VERSION Version; ///< Offset 2-6 Firmware version +} FIRMWARE_VERSION_INFO; + +#ifndef __SMBIOS_STANDARD_H__ +/// +/// The Smbios structure header. +/// +typedef struct { + UINT8 Type; + UINT8 Length; + UINT16 Handle; +} SMBIOS_STRUCTURE; +#endif + +/// +/// Firmware Version Information HOB Structure +/// +typedef struct { + EFI_HOB_GUID_TYPE Header; ///< Offset 0-23 The header of FVI HOB + SMBIOS_STRUCTURE SmbiosData; ///< Offset 24-27 The SMBIOS header of FVI HOB + UINT8 Count; ///< Offset 28 Number of FVI elements included. +/// +/// FIRMWARE_VERSION_INFO structures followed by the null terminated string buffer +/// +} FIRMWARE_VERSION_INFO_HOB; +#pragma pack() + +#endif // _FIRMWARE_VERSION_INFO_HOB_H_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspUpd.h new file mode 100644 index 0000000..f9b0385 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspUpd.h @@ -0,0 +1,48 @@ +/** @file + +Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPUPD_H__ +#define __FSPUPD_H__ + +#include <FspEas.h> + +#pragma pack(1) + +#define FSPT_UPD_SIGNATURE 0x545F4450554C4643 /* 'CFLUPD_T' */ + +#define FSPM_UPD_SIGNATURE 0x4D5F4450554C4643 /* 'CFLUPD_M' */ + +#define FSPS_UPD_SIGNATURE 0x535F4450554C4643 /* 'CFLUPD_S' */ + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h new file mode 100644 index 0000000..85dbe70 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h @@ -0,0 +1,2865 @@ +/** @file + +Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPMUPD_H__ +#define __FSPMUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +#include <MemInfoHob.h> + +/// +/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC. +/// +typedef struct { + UINT8 Revision; ///< Chipset Init Info Revision + UINT8 Rsvd[3]; ///< Reserved + UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table + UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table +} CHIPSET_INIT_INFO; + + +/** Fsp M Configuration +**/ +typedef struct { + +/** Offset 0x0040 - Platform Reserved Memory Size + The minimum platform memory size required to pass control into DXE +**/ + UINT64 PlatformMemorySize; + +/** Offset 0x0048 - Memory SPD Pointer Channel 0 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT32 MemorySpdPtr00; + +/** Offset 0x004C - Memory SPD Pointer Channel 0 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT32 MemorySpdPtr01; + +/** Offset 0x0050 - Memory SPD Pointer Channel 1 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT32 MemorySpdPtr10; + +/** Offset 0x0054 - Memory SPD Pointer Channel 1 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT32 MemorySpdPtr11; + +/** Offset 0x0058 - SPD Data Length + Length of SPD Data + 0x100:256 Bytes, 0x200:512 Bytes +**/ + UINT16 MemorySpdDataLen; + +/** Offset 0x005A - Dq Byte Map CH0 + Dq byte mapping between CPU and DRAM, Channel 0: board-dependent +**/ + UINT8 DqByteMapCh0[12]; + +/** Offset 0x0066 - Dq Byte Map CH1 + Dq byte mapping between CPU and DRAM, Channel 1: board-dependent +**/ + UINT8 DqByteMapCh1[12]; + +/** Offset 0x0072 - Dqs Map CPU to DRAM CH 0 + Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent +**/ + UINT8 DqsMapCpu2DramCh0[8]; + +/** Offset 0x007A - Dqs Map CPU to DRAM CH 1 + Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent +**/ + UINT8 DqsMapCpu2DramCh1[8]; + +/** Offset 0x0082 - RcompResister settings + Indicates RcompReister settings: CNL - 0's means MRC auto configured based on Design + Guidelines, otherwise input an Ohmic value per segment. CFL will need to provide + the appropriate values. +**/ + UINT16 RcompResistor[3]; + +/** Offset 0x0088 - RcompTarget settings + RcompTarget settings: CNL - 0's mean MRC auto configured based on Design Guidelines, + otherwise input an Ohmic value per segment. CFL will need to provide the appropriate values. +**/ + UINT16 RcompTarget[5]; + +/** Offset 0x0092 - Dqs Pins Interleaved Setting + Indicates DqPinsInterleaved setting: board-dependent + $EN_DIS +**/ + UINT8 DqPinsInterleaved; + +/** Offset 0x0093 - VREF_CA + CA Vref routing: board-dependent + 0:VREF_CA goes to both CH_A and CH_B, 1: VREF_CA to CH_A and VREF_DQ_A to CH_B, + 2:VREF_CA to CH_A and VREF_DQ_B to CH_B +**/ + UINT8 CaVrefConfig; + +/** Offset 0x0094 - Smram Mask + The SMM Regions AB-SEG and/or H-SEG reserved + 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both +**/ + UINT8 SmramMask; + +/** Offset 0x0095 - MRC Fast Boot + Enables/Disable the MRC fast path thru the MRC + $EN_DIS +**/ + UINT8 MrcFastBoot; + +/** Offset 0x0096 - Rank Margin Tool per Task + This option enables the user to execute Rank Margin Tool per major training step + in the MRC. + $EN_DIS +**/ + UINT8 RmtPerTask; + +/** Offset 0x0097 - Training Trace + This option enables the trained state tracing feature in MRC. This feature will + print out the key training parameters state across major training steps. + $EN_DIS +**/ + UINT8 TrainTrace; + +/** Offset 0x0098 - Intel Enhanced Debug + Intel Enhanced Debug (IED): 0=Disabled, 0x400000=Enabled and 4MB SMRAM occupied + 0 : Disable, 0x400000 : Enable +**/ + UINT32 IedSize; + +/** Offset 0x009C - Tseg Size + Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build + 0x0400000:4MB, 0x01000000:16MB +**/ + UINT32 TsegSize; + +/** Offset 0x00A0 - MMIO Size + Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB +**/ + UINT16 MmioSize; + +/** Offset 0x00A2 - Probeless Trace + Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB. + This also requires IED to be enabled. + $EN_DIS +**/ + UINT8 ProbelessTrace; + +/** Offset 0x00A3 - GDXC IOT SIZE + Size of IOT and MOT is in 8 MB chunks +**/ + UINT8 GdxcIotSize; + +/** Offset 0x00A4 - GDXC MOT SIZE + Size of IOT and MOT is in 8 MB chunks +**/ + UINT8 GdxcMotSize; + +/** Offset 0x00A5 - Spd Address Tabl + Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used + if SPD Address is 00 +**/ + UINT8 SpdAddressTable[4]; + +/** Offset 0x00A9 - Internal Graphics Pre-allocated Memory + Size of memory preallocated for internal graphics. + 0x00:0 MB, 0x01:32 MB, 0x02:64 MB +**/ + UINT8 IgdDvmt50PreAlloc; + +/** Offset 0x00AA - Internal Graphics + Enable/disable internal graphics. + $EN_DIS +**/ + UINT8 InternalGfx; + +/** Offset 0x00AB - Aperture Size + Select the Aperture Size. + 0:128 MB, 1:256 MB, 2:512 MB +**/ + UINT8 ApertureSize; + +/** Offset 0x00AC - Board Type + MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile + Halo, 7=UP Server + 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server +**/ + UINT8 UserBd; + +/** Offset 0x00AD - SA GV + System Agent dynamic frequency support and when enabled memory will be training + at two different frequencies. Only effects ULX/ULT CPUs. 0=Disabled, 1=FixedLow, + 2=FixedHigh, and 3=Enabled. + 0:Disabled, 1:FixedLow, 2:FixedHigh, 3:Enabled +**/ + UINT8 SaGv; + +/** Offset 0x00AE - DDR Frequency Limit + Maximum Memory Frequency Selections in Mhz. Valid values should match the refclk, + i.e. divide by 133 or 100 + 1067:1067, 1333:1333, 1400:1400, 1600:1600, 1800:1800, 1867:1867, 2000:2000, 2133:2133, + 2200:2200, 2400:2400, 2600:2600, 2667:2667, 2800:2800, 2933:2933, 3000:3000, 3200:3200, 0:Auto +**/ + UINT16 DdrFreqLimit; + +/** Offset 0x00B0 - Low Frequency + SAGV Low Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133, + 2400, 2667, 2933 and 0 for Auto. + 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto +**/ + UINT16 FreqSaGvLow; + +/** Offset 0x00B2 - Mid Frequency + SAGV Mid Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133, + 2400, 2667, 2933 and 0 for Auto. + 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto +**/ + UINT16 FreqSaGvMid; + +/** Offset 0x00B4 - Rank Margin Tool + Enable/disable Rank Margin Tool. + $EN_DIS +**/ + UINT8 RMT; + +/** Offset 0x00B5 - Channel A DIMM Control + Channel A DIMM Control Support - Enable or Disable Dimms on Channel A. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs +**/ + UINT8 DisableDimmChannel0; + +/** Offset 0x00B6 - Channel B DIMM Control + Channel B DIMM Control Support - Enable or Disable Dimms on Channel B. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs +**/ + UINT8 DisableDimmChannel1; + +/** Offset 0x00B7 - Scrambler Support + This option enables data scrambling in memory. + $EN_DIS +**/ + UINT8 ScramblerSupport; + +/** Offset 0x00B8 - Skip Multi-Processor Initialization + When this is skipped, boot loader must initialize processors before SilicionInit + API. </b>0: Initialize; <b>1: Skip + $EN_DIS +**/ + UINT8 SkipMpInit; + +/** Offset 0x00B9 - SPD Profile Selected + Select DIMM timing profile. Options are 0=Default profile, 1=Custom profile, 2=XMP + Profile 1, 3=XMP Profile 2 + 0:Default profile, 1:Custom profile, 2:XMP profile 1, 3:XMP profile 2 +**/ + UINT8 SpdProfileSelected; + +/** Offset 0x00BA - Memory Reference Clock + 100MHz, 133MHz. + 0:133MHz, 1:100MHz +**/ + UINT8 RefClk; + +/** Offset 0x00BB +**/ + UINT8 UnusedUpdSpace0; + +/** Offset 0x00BC - Memory Voltage + Memory Voltage Override (Vddq). Default = no override + 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40 + Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts +**/ + UINT16 VddVoltage; + +/** Offset 0x00BE - Memory Ratio + Automatic or the frequency will equal ratio times reference clock. Set to Auto to + recalculate memory timings listed below. + 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 +**/ + UINT8 Ratio; + +/** Offset 0x00BF - QCLK Odd Ratio + Adds 133 or 100 MHz to QCLK frequency, depending on RefClk + $EN_DIS +**/ + UINT8 OddRatioMode; + +/** Offset 0x00C0 - tCL + CAS Latency, 0: AUTO, max: 31 +**/ + UINT8 tCL; + +/** Offset 0x00C1 - tCWL + Min CAS Write Latency Delay Time, 0: AUTO, max: 34 +**/ + UINT8 tCWL; + +/** Offset 0x00C2 - tRCD/tRP + RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63 +**/ + UINT8 tRCDtRP; + +/** Offset 0x00C3 - tRRD + Min Row Active to Row Active Delay Time, 0: AUTO, max: 15 +**/ + UINT8 tRRD; + +/** Offset 0x00C4 - tFAW + Min Four Activate Window Delay Time, 0: AUTO, max: 63 +**/ + UINT16 tFAW; + +/** Offset 0x00C6 - tRAS + RAS Active Time, 0: AUTO, max: 64 +**/ + UINT16 tRAS; + +/** Offset 0x00C8 - tREFI + Refresh Interval, 0: AUTO, max: 65535 +**/ + UINT16 tREFI; + +/** Offset 0x00CA - tRFC + Min Refresh Recovery Delay Time, 0: AUTO, max: 1023 +**/ + UINT16 tRFC; + +/** Offset 0x00CC - tRTP + Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal + values: 5, 6, 7, 8, 9, 10, 12 +**/ + UINT8 tRTP; + +/** Offset 0x00CD - tWR + Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, + 20, 24, 30, 34, 40 + 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30, + 34:34, 40:40 +**/ + UINT8 tWR; + +/** Offset 0x00CE - tWTR + Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28 +**/ + UINT8 tWTR; + +/** Offset 0x00CF - NMode + System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N +**/ + UINT8 NModeSupport; + +/** Offset 0x00D0 - DllBwEn[0] + DllBwEn[0], for 1067 (0..7) +**/ + UINT8 DllBwEn0; + +/** Offset 0x00D1 - DllBwEn[1] + DllBwEn[1], for 1333 (0..7) +**/ + UINT8 DllBwEn1; + +/** Offset 0x00D2 - DllBwEn[2] + DllBwEn[2], for 1600 (0..7) +**/ + UINT8 DllBwEn2; + +/** Offset 0x00D3 - DllBwEn[3] + DllBwEn[3], for 1867 and up (0..7) +**/ + UINT8 DllBwEn3; + +/** Offset 0x00D4 - ISVT IO Port Address + ISVT IO Port Address. 0=Minimal, 0xFF=Maximum, 0x99=Default +**/ + UINT8 IsvtIoPort; + +/** Offset 0x00D5 - CPU Trace Hub Mode + Select 'Target Debugger' if Trace Hub is used by target debugger software or 'Disable' + trace hub functionality. + 0: Disable, 1:Target Debugger Mode +**/ + UINT8 CpuTraceHubMode; + +/** Offset 0x00D6 - CPU Trace Hub Memory Region 0 + CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 CpuTraceHubMemReg0Size; + +/** Offset 0x00D7 - CPU Trace Hub Memory Region 1 + CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 CpuTraceHubMemReg1Size; + +/** Offset 0x00D8 - Enable or Disable Peci C10 Reset command + Enable or Disable Peci C10 Reset command. If Enabled, BIOS will send the CPU message + to disable peci reset on C10 exit. The default value is <b>0: Disable</b> for CNL, + and <b>1: Enable</b> for all other CPU's + $EN_DIS +**/ + UINT8 PeciC10Reset; + +/** Offset 0x00D9 - Enable or Disable Peci Sx Reset command + Enable or Disable Peci Sx Reset command; <b>0: Disable;</b> 1: Enable. + $EN_DIS +**/ + UINT8 PeciSxReset; + +/** Offset 0x00DA - HECI Timeouts + 0: Disable, 1: Enable (Default) timeout check for HECI + $EN_DIS +**/ + UINT8 HeciTimeouts; + +/** Offset 0x00DB +**/ + UINT8 UnusedUpdSpace1; + +/** Offset 0x00DC - HECI1 BAR address + BAR address of HECI1 +**/ + UINT32 Heci1BarAddress; + +/** Offset 0x00E0 - HECI2 BAR address + BAR address of HECI2 +**/ + UINT32 Heci2BarAddress; + +/** Offset 0x00E4 - HECI3 BAR address + BAR address of HECI3 +**/ + UINT32 Heci3BarAddress; + +/** Offset 0x00E8 - SG dGPU Power Delay + SG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is + 300=300 microseconds +**/ + UINT16 SgDelayAfterPwrEn; + +/** Offset 0x00EA - SG dGPU Reset Delay + SG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100 + microseconds +**/ + UINT16 SgDelayAfterHoldReset; + +/** Offset 0x00EC - MMIO size adjustment for AUTO mode + Positive number means increasing MMIO size, Negative value means decreasing MMIO + size: 0 (Default)=no change to AUTO mode MMIO size +**/ + UINT16 MmioSizeAdjustment; + +/** Offset 0x00EE - Enable/Disable DMI GEN3 Static EQ Phase1 programming + Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static + Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 DmiGen3ProgramStaticEq; + +/** Offset 0x00EF - Enable/Disable PEG 0 + Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits + it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise + 0:Disable, 1:Enable, 2:AUTO +**/ + UINT8 Peg0Enable; + +/** Offset 0x00F0 - Enable/Disable PEG 1 + Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits + it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise + 0:Disable, 1:Enable, 2:AUTO +**/ + UINT8 Peg1Enable; + +/** Offset 0x00F1 - Enable/Disable PEG 2 + Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits + it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise + 0:Disable, 1:Enable, 2:AUTO +**/ + UINT8 Peg2Enable; + +/** Offset 0x00F2 - Enable/Disable PEG 3 + Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits + it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise + 0:Disable, 1:Enable, 2:AUTO +**/ + UINT8 Peg3Enable; + +/** Offset 0x00F3 - PEG 0 Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 Peg0MaxLinkSpeed; + +/** Offset 0x00F4 - PEG 1 Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 Peg1MaxLinkSpeed; + +/** Offset 0x00F5 - PEG 2 Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 Peg2MaxLinkSpeed; + +/** Offset 0x00F6 - PEG 3 Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 Peg3MaxLinkSpeed; + +/** Offset 0x00F7 - PEG 0 Max Link Width + Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): + Limit Link to x2, (0x3):Limit Link to x4, (0x4): Limit Link to x8 + 0:Auto, 1:x1, 2:x2, 3:x4, 4:x8 +**/ + UINT8 Peg0MaxLinkWidth; + +/** Offset 0x00F8 - PEG 1 Max Link Width + Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): + Limit Link to x2, (0x3):Limit Link to x4 + 0:Auto, 1:x1, 2:x2, 3:x4 +**/ + UINT8 Peg1MaxLinkWidth; + +/** Offset 0x00F9 - PEG 2 Max Link Width + Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): + Limit Link to x2 + 0:Auto, 1:x1, 2:x2 +**/ + UINT8 Peg2MaxLinkWidth; + +/** Offset 0x00FA - PEG 3 Max Link Width + Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): + Limit Link to x2 + 0:Auto, 1:x1, 2:x2 +**/ + UINT8 Peg3MaxLinkWidth; + +/** Offset 0x00FB - Power down unused lanes on PEG 0 + (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based + on the max possible link width + 0:No power saving, 1:Auto +**/ + UINT8 Peg0PowerDownUnusedLanes; + +/** Offset 0x00FC - Power down unused lanes on PEG 1 + (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based + on the max possible link width + 0:No power saving, 1:Auto +**/ + UINT8 Peg1PowerDownUnusedLanes; + +/** Offset 0x00FD - Power down unused lanes on PEG 2 + (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based + on the max possible link width + 0:No power saving, 1:Auto +**/ + UINT8 Peg2PowerDownUnusedLanes; + +/** Offset 0x00FE - Power down unused lanes on PEG 3 + (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based + on the max possible link width + 0:No power saving, 1:Auto +**/ + UINT8 Peg3PowerDownUnusedLanes; + +/** Offset 0x00FF - PCIe ASPM programming will happen in relation to the Oprom + Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default): + Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after + Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume + 0:Before, 1:After +**/ + UINT8 InitPcieAspmAfterOprom; + +/** Offset 0x0100 - PCIe Disable Spread Spectrum Clocking + PCIe Disable Spread Spectrum Clocking. Normal Operation(0x0)(Default) - SSC enabled, + Disable SSC(0X1) - Disable SSC per platform design or for compliance testing + 0:Normal Operation, 1:Disable SSC +**/ + UINT8 PegDisableSpreadSpectrumClocking; + +/** Offset 0x0101 - DMI Gen3 Root port preset values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane +**/ + UINT8 DmiGen3RootPortPreset[8]; + +/** Offset 0x0109 - DMI Gen3 End port preset values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane +**/ + UINT8 DmiGen3EndPointPreset[8]; + +/** Offset 0x0111 - DMI Gen3 End port Hint values per lane + Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 DmiGen3EndPointHint[8]; + +/** Offset 0x0119 - DMI Gen3 RxCTLEp per-Bundle control + Range: 0-15, 0 is default for each bundle, must be specified based upon platform design +**/ + UINT8 DmiGen3RxCtlePeaking[4]; + +/** Offset 0x011D - Thermal Velocity Boost Ratio clipping + 0(Default): Disabled, 1: Enabled. This service controls Core frequency reduction + caused by high package temperatures for processors that implement the Intel Thermal + Velocity Boost (TVB) feature + 0: Disabled, 1: Enabled +**/ + UINT8 TvbRatioClipping; + +/** Offset 0x011E - Thermal Velocity Boost voltage optimization + 0: Disabled, 1: Enabled(Default). This service controls thermal based voltage optimizations + for processors that implement the Intel Thermal Velocity Boost (TVB) feature. + 0: Disabled, 1: Enabled +**/ + UINT8 TvbVoltageOptimization; + +/** Offset 0x011F - PEG Gen3 RxCTLEp per-Bundle control + Range: 0-15, 12 is default for each bundle, must be specified based upon platform design +**/ + UINT8 PegGen3RxCtlePeaking[10]; + +/** Offset 0x0129 +**/ + UINT8 UnusedUpdSpace2[3]; + +/** Offset 0x012C - Memory data pointer for saved preset search results + The reference code will store the Gen3 Preset Search results in the SaDataHob's + PegData structure (SA_PEG_DATA) and platform code can save/restore this data to + skip preset search in the following boots. Range: 0-0xFFFFFFFF, default is 0 +**/ + UINT32 PegDataPtr; + +/** Offset 0x0130 - PEG PERST# GPIO information + The reference code will use the information in this structure in order to reset + PCIe Gen3 devices during equalization, if necessary +**/ + UINT8 PegGpioData[28]; + +/** Offset 0x014C - PCIe Hot Plug Enable/Disable per port + 0(Default): Disable, 1: Enable +**/ + UINT8 PegRootPortHPE[4]; + +/** Offset 0x0150 - DeEmphasis control for DMI + DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB + 0: -6dB, 1: -3.5dB +**/ + UINT8 DmiDeEmphasis; + +/** Offset 0x0151 - Selection of the primary display device + 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Switchable Graphics + 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Switchable Graphics +**/ + UINT8 PrimaryDisplay; + +/** Offset 0x0152 - Selection of iGFX GTT Memory size + 1=2MB, 2=4MB, 3=8MB, Default is 3 + 1:2MB, 2:4MB, 3:8MB +**/ + UINT16 GttSize; + +/** Offset 0x0154 - Temporary MMIO address for GMADR + The reference code will use this as Temporary MMIO address space to access GMADR + Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to + (GmAdr + ApertureSize). Default is (PciExpressBaseAddress - ApertureSize) to (PciExpressBaseAddress + - 0x1) (Where ApertureSize = 256MB) +**/ + UINT32 GmAdr; + +/** Offset 0x0158 - Temporary MMIO address for GTTMMADR + The reference code will use this as Temporary MMIO address space to access GTTMMADR + Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr + to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO + + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB) +**/ + UINT32 GttMmAdr; + +/** Offset 0x015C - Selection of PSMI Region size + 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0 + 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB +**/ + UINT8 PsmiRegionSize; + +/** Offset 0x015D - Switchable Graphics GPIO information for PEG 0 + Switchable Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs +**/ + UINT8 SaRtd3Pcie0Gpio[24]; + +/** Offset 0x0175 - Switchable Graphics GPIO information for PEG 1 + Switchable Graphics GPIO information for PEG 1, for Reset, power and wake GPIOs +**/ + UINT8 SaRtd3Pcie1Gpio[24]; + +/** Offset 0x018D - Switchable Graphics GPIO information for PEG 2 + Switchable Graphics GPIO information for PEG 2, for Reset, power and wake GPIOs +**/ + UINT8 SaRtd3Pcie2Gpio[24]; + +/** Offset 0x01A5 - Switchable Graphics GPIO information for PEG 3 + Switchable Graphics GPIO information for PEG 3, for Reset, power and wake GPIOs +**/ + UINT8 SaRtd3Pcie3Gpio[24]; + +/** Offset 0x01BD - Enable/Disable MRC TXT dependency + When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default): + MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization + $EN_DIS +**/ + UINT8 TxtImplemented; + +/** Offset 0x01BE - Enable/Disable SA OcSupport + Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport + $EN_DIS +**/ + UINT8 SaOcSupport; + +/** Offset 0x01BF - GT slice Voltage Mode + 0(Default): Adaptive, 1: Override + 0: Adaptive, 1: Override +**/ + UINT8 GtVoltageMode; + +/** Offset 0x01C0 - Maximum GTs turbo ratio override + 0(Default)=Minimal/Auto, 60=Maximum +**/ + UINT8 GtMaxOcRatio; + +/** Offset 0x01C1 +**/ + UINT8 UnusedUpdSpace3; + +/** Offset 0x01C2 - The voltage offset applied to GT slice + 0(Default)=Minimal, 1000=Maximum +**/ + UINT16 GtVoltageOffset; + +/** Offset 0x01C4 - The GT slice voltage override which is applied to the entire range of GT frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtVoltageOverride; + +/** Offset 0x01C6 - adaptive voltage applied during turbo frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtExtraTurboVoltage; + +/** Offset 0x01C8 - voltage offset applied to the SA + 0(Default)=Minimal, 1000=Maximum +**/ + UINT16 SaVoltageOffset; + +/** Offset 0x01CA - PCIe root port Function number for Switchable Graphics dGPU + Root port Index number to indicate which PCIe root port has dGPU +**/ + UINT8 RootPortIndex; + +/** Offset 0x01CB - Realtime Memory Timing + 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform + realtime memory timing changes after MRC_DONE. + 0: Disabled, 1: Enabled +**/ + UINT8 RealtimeMemoryTiming; + +/** Offset 0x01CC - Enable/Disable SA IPU + Enable(Default): Enable SA IPU, Disable: Disable SA IPU + $EN_DIS +**/ + UINT8 SaIpuEnable; + +/** Offset 0x01CD - IPU IMR Configuration + 0:IPU Camera, 1:IPU Gen Default is 0 + 0:IPU Camera, 1:IPU Gen +**/ + UINT8 SaIpuImrConfiguration; + +/** Offset 0x01CE - Selection of PSMI Support On/Off + 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support + $EN_DIS +**/ + UINT8 GtPsmiSupport; + +/** Offset 0x01CF - GT unslice Voltage Mode + 0(Default): Adaptive, 1: Override + 0: Adaptive, 1: Override +**/ + UINT8 GtusVoltageMode; + +/** Offset 0x01D0 - voltage offset applied to GT unslice + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtusVoltageOffset; + +/** Offset 0x01D2 - GT unslice voltage override which is applied to the entire range of GT frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtusVoltageOverride; + +/** Offset 0x01D4 - adaptive voltage applied during turbo frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtusExtraTurboVoltage; + +/** Offset 0x01D6 - Maximum GTus turbo ratio override + 0(Default)=Minimal, 60=Maximum +**/ + UINT8 GtusMaxOcRatio; + +/** Offset 0x01D7 - SaPreMemProductionRsvd + Reserved for SA Pre-Mem Production + $EN_DIS +**/ + UINT8 SaPreMemProductionRsvd[4]; + +/** Offset 0x01DB - BIST on Reset + Enable or Disable BIST on Reset; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 BistOnReset; + +/** Offset 0x01DC - Skip Stop PBET Timer Enable/Disable + Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 SkipStopPbet; + +/** Offset 0x01DD - C6DRAM power gating feature + This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM + power gating feature.- 0: Don't allocate any PRMRR memory for C6DRAM power gating + feature.- <b>1: Allocate PRMRR memory for C6DRAM power gating feature</b>. + $EN_DIS +**/ + UINT8 EnableC6Dram; + +/** Offset 0x01DE - Over clocking support + Over clocking support; <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 OcSupport; + +/** Offset 0x01DF - Over clocking Lock + Over clocking Lock Enable/Disable; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 OcLock; + +/** Offset 0x01E0 - Maximum Core Turbo Ratio Override + Maximum core turbo ratio override allows to increase CPU core frequency beyond the + fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-255 +**/ + UINT8 CoreMaxOcRatio; + +/** Offset 0x01E1 - Core voltage mode + Core voltage mode; <b>0: Adaptive</b>; 1: Override. + $EN_DIS +**/ + UINT8 CoreVoltageMode; + +/** Offset 0x01E2 - Program Cache Attributes + Program Cache Attributes; <b>0: Program</b>; 1: Disable Program. + $EN_DIS +**/ + UINT8 DisableMtrrProgram; + +/** Offset 0x01E3 - Maximum clr turbo ratio override + Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the + fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-255 +**/ + UINT8 RingMaxOcRatio; + +/** Offset 0x01E4 - Hyper Threading Enable/Disable + Enable or Disable Hyper Threading; 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 HyperThreading; + +/** Offset 0x01E5 - CPU ratio value + CPU ratio value. Valid Range 0 to 63. CPU Ratio is 0 when disabled. +**/ + UINT8 CpuRatio; + +/** Offset 0x01E6 - Boot frequency + Sets the boot frequency starting from reset vector.- 0: Maximum battery performance.- + <b>1: Maximum non-turbo performance</b>.- 2: Turbo performance. @note If Turbo + is selected BIOS will start in max non-turbo mode and switch to Turbo mode. + 0:0, 1:1, 2:2 +**/ + UINT8 BootFrequency; + +/** Offset 0x01E7 - Number of active cores + Number of active cores(Depends on Number of cores). <b>0: All</b>;<b>1: 1 </b>;<b>2: + 2 </b>;<b>3: 3 </b> + 0:All, 1:1, 2:2, 3:3 +**/ + UINT8 ActiveCoreCount; + +/** Offset 0x01E8 - Processor Early Power On Configuration FCLK setting + <b>0: 800 MHz (ULT/ULX)</b>. <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.- + 2: 400 MHz. - 3: Reserved + 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved +**/ + UINT8 FClkFrequency; + +/** Offset 0x01E9 - Set JTAG power in C10 and deeper power states + False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10 + and deeper power states for debug purpose. <b>0: False</b>; 1: True. + 0: False, 1: True +**/ + UINT8 JtagC10PowerGateDisable; + +/** Offset 0x01EA - Enable or Disable VMX + Enable or Disable VMX; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 VmxEnable; + +/** Offset 0x01EB - AVX2 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx2RatioOffset; + +/** Offset 0x01EC - AVX3 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx3RatioOffset; + +/** Offset 0x01ED - BCLK Adaptive Voltage Enable + When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0: + Disable;<b> 1: Enable + $EN_DIS +**/ + UINT8 BclkAdaptiveVoltage; + +/** Offset 0x01EE - Core PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 +**/ + UINT8 CorePllVoltageOffset; + +/** Offset 0x01EF +**/ + UINT8 UnusedUpdSpace4; + +/** Offset 0x01F0 - core voltage override + The core voltage override which is applied to the entire range of cpu core frequencies. + Valid Range 0 to 2000 +**/ + UINT16 CoreVoltageOverride; + +/** Offset 0x01F2 - Core Turbo voltage Adaptive + Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode. + Valid Range 0 to 2000 +**/ + UINT16 CoreVoltageAdaptive; + +/** Offset 0x01F4 - Core Turbo voltage Offset + The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 +**/ + UINT16 CoreVoltageOffset; + +/** Offset 0x01F6 - Ring Downbin + Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always + lower than the core ratio.0: Disable; <b>1: Enable.</b> + $EN_DIS +**/ + UINT8 RingDownBin; + +/** Offset 0x01F7 - Ring voltage mode + Ring voltage mode; <b>0: Adaptive</b>; 1: Override. + $EN_DIS +**/ + UINT8 RingVoltageMode; + +/** Offset 0x01F8 - Ring voltage override + The ring voltage override which is applied to the entire range of cpu ring frequencies. + Valid Range 0 to 2000 +**/ + UINT16 RingVoltageOverride; + +/** Offset 0x01FA - Ring Turbo voltage Adaptive + Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode. + Valid Range 0 to 2000 +**/ + UINT16 RingVoltageAdaptive; + +/** Offset 0x01FC - Ring Turbo voltage Offset + The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000 +**/ + UINT16 RingVoltageOffset; + +/** Offset 0x01FE - TjMax Offset + TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support + TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63 +**/ + UINT8 TjMaxOffset; + +/** Offset 0x01FF - BiosGuard + Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable + $EN_DIS +**/ + UINT8 BiosGuard; + +/** Offset 0x0200 +**/ + UINT8 BiosGuardToolsInterface; + +/** Offset 0x0201 - EnableSgx + Enable/Disable. 0: Disable, Enable/Disable SGX feature, 1: enable, 2: Software Control + 0: Disable, 1: Enable, 2: Software Control +**/ + UINT8 EnableSgx; + +/** Offset 0x0202 - Txt + Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable + $EN_DIS +**/ + UINT8 Txt; + +/** Offset 0x0203 +**/ + UINT8 UnusedUpdSpace5; + +/** Offset 0x0204 - PrmrrSize + 0=Invalid, 32MB=0x2000000, 64MB=0x4000000, 128MB=0x8000000, 256MB=0x10000000 +**/ + UINT32 PrmrrSize; + +/** Offset 0x0208 - SinitMemorySize + Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable +**/ + UINT32 SinitMemorySize; + +/** Offset 0x020C - TxtHeapMemorySize + Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable +**/ + UINT32 TxtHeapMemorySize; + +/** Offset 0x0210 - TxtDprMemorySize + Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable +**/ + UINT32 TxtDprMemorySize; + +/** Offset 0x0214 +**/ + UINT8 UnusedUpdSpace6[4]; + +/** Offset 0x0218 - TxtDprMemoryBase + Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable +**/ + UINT64 TxtDprMemoryBase; + +/** Offset 0x0220 - BiosAcmBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 BiosAcmBase; + +/** Offset 0x0224 - BiosAcmSize + Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable +**/ + UINT32 BiosAcmSize; + +/** Offset 0x0228 - ApStartupBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 ApStartupBase; + +/** Offset 0x022C - TgaSize + Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable +**/ + UINT32 TgaSize; + +/** Offset 0x0230 - TxtLcpPdBase + Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable +**/ + UINT64 TxtLcpPdBase; + +/** Offset 0x0238 - TxtLcpPdSize + Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable +**/ + UINT64 TxtLcpPdSize; + +/** Offset 0x0240 - IsTPMPresence + IsTPMPresence default values +**/ + UINT8 IsTPMPresence; + +/** Offset 0x0241 - ReservedSecurityPreMem + Reserved for Security Pre-Mem + $EN_DIS +**/ + UINT8 ReservedSecurityPreMem[3]; + +/** Offset 0x0244 - Base addresses for VT-d function MMIO access + Base addresses for VT-d MMIO access per VT-d engine +**/ + UINT32 VtdBaseAddress[3]; + +/** Offset 0x0250 - Enable SMBus + Enable/disable SMBus controller. + $EN_DIS +**/ + UINT8 SmbusEnable; + +/** Offset 0x0251 - Platform Debug Consent + To 'opt-in' for debug, please select 'Enabled' with the desired debug probe type. + Enabling this BIOS option may alter the default value of other debug-related BIOS + options. Note: DCI OOB (aka BSSB) uses CCA probe; [DCI OOB+DbC] and [USB2 DbC] + have the same setting + 0:Disabled, 1:Enabled (DCI OOB+[DbC]), 2:Enabled (DCI OOB), 3:Enabled (USB3 DbC), + 4:Enabled (XDP/MIPI60), 5:Enabled (USB2 DbC) +**/ + UINT8 PlatformDebugConsent; + +/** Offset 0x0252 - USB3 Type-C UFP2DFP Kernel/Platform Debug Support + This BIOS option enables kernel and platform debug for USB3 interface over a UFP + Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting. + 0:Disabled, 1:Enabled, 2:No Change +**/ + UINT8 DciUsb3TypecUfpDbg; + +/** Offset 0x0253 - PCH Trace Hub Mode + Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' + if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. + 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode +**/ + UINT8 PchTraceHubMode; + +/** Offset 0x0254 - PCH Trace Hub Memory Region 0 buffer Size + Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 PchTraceHubMemReg0Size; + +/** Offset 0x0255 - PCH Trace Hub Memory Region 1 buffer Size + Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 PchTraceHubMemReg1Size; + +/** Offset 0x0256 - Enable Intel HD Audio (Azalia) + 0: Disable, 1: Enable (Default) Azalia controller + $EN_DIS +**/ + UINT8 PchHdaEnable; + +/** Offset 0x0257 - Enable PCH ISH Controller + 0: Disable, 1: Enable (Default) ISH Controller + $EN_DIS +**/ + UINT8 PchIshEnable; + +/** Offset 0x0258 - Enable PCH HSIO PCIE Rx Set Ctle + Enable PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtleEnable[24]; + +/** Offset 0x0270 - PCH HSIO PCIE Rx Set Ctle Value + PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtle[24]; + +/** Offset 0x0288 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[24]; + +/** Offset 0x02A0 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmp[24]; + +/** Offset 0x02B8 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[24]; + +/** Offset 0x02D0 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmp[24]; + +/** Offset 0x02E8 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[24]; + +/** Offset 0x0300 - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmp[24]; + +/** Offset 0x0318 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DeEmphEnable[24]; + +/** Offset 0x0330 - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value + PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen1DeEmph[24]; + +/** Offset 0x0348 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[24]; + +/** Offset 0x0360 - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5[24]; + +/** Offset 0x0378 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[24]; + +/** Offset 0x0390 - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0[24]; + +/** Offset 0x03A8 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen1EqBoostMagEnable[8]; + +/** Offset 0x03B0 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen1EqBoostMag[8]; + +/** Offset 0x03B8 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen2EqBoostMagEnable[8]; + +/** Offset 0x03C0 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen2EqBoostMag[8]; + +/** Offset 0x03C8 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen3EqBoostMagEnable[8]; + +/** Offset 0x03D0 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen3EqBoostMag[8]; + +/** Offset 0x03D8 - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8]; + +/** Offset 0x03E0 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen1DownscaleAmp[8]; + +/** Offset 0x03E8 - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8]; + +/** Offset 0x03F0 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen2DownscaleAmp[8]; + +/** Offset 0x03F8 - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8]; + +/** Offset 0x0400 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen3DownscaleAmp[8]; + +/** Offset 0x0408 - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen1DeEmphEnable[8]; + +/** Offset 0x0410 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen1DeEmph[8]; + +/** Offset 0x0418 - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen2DeEmphEnable[8]; + +/** Offset 0x0420 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen2DeEmph[8]; + +/** Offset 0x0428 - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen3DeEmphEnable[8]; + +/** Offset 0x0430 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen3DeEmph[8]; + +/** Offset 0x0438 - PCH LPC Enhance the port 8xh decoding + Original LPC only decodes one byte of port 80h. + $EN_DIS +**/ + UINT8 PchLpcEnhancePort8xhDecoding; + +/** Offset 0x0439 - PCH Port80 Route + Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. + $EN_DIS +**/ + UINT8 PchPort80Route; + +/** Offset 0x043A - Enable SMBus ARP support + Enable SMBus ARP support. + $EN_DIS +**/ + UINT8 SmbusArpEnable; + +/** Offset 0x043B - Number of RsvdSmbusAddressTable. + The number of elements in the RsvdSmbusAddressTable. +**/ + UINT8 PchNumRsvdSmbusAddresses; + +/** Offset 0x043C - SMBUS Base Address + SMBUS Base Address (IO space). +**/ + UINT16 PchSmbusIoBase; + +/** Offset 0x043E - Size of PCIe IMR. + Size of PCIe IMR in megabytes +**/ + UINT16 PcieImrSize; + +/** Offset 0x0440 - Point of RsvdSmbusAddressTable + Array of addresses reserved for non-ARP-capable SMBus devices. +**/ + UINT32 RsvdSmbusAddressTablePtr; + +/** Offset 0x0444 - Enable PCIE RP Mask + Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 + for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpEnableMask; + +/** Offset 0x0448 - Enable PCIe IMR + 0:Disable, 1:Enable + $EN_DIS +**/ + UINT8 PcieImrEnabled; + +/** Offset 0x0449 - Root port number for IMR. + Root port number for IMR. +**/ + UINT8 ImrRpSelection; + +/** Offset 0x044A - Enable SMBus Alert Pin + Enable SMBus Alert Pin. + $EN_DIS +**/ + UINT8 PchSmbAlertEnable; + +/** Offset 0x044B - Debug Interfaces + Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, + BIT2 - Not used. +**/ + UINT8 PcdDebugInterfaceFlags; + +/** Offset 0x044C - PcdSerialIoUartNumber + Select SerialIo Uart Controller for debug. + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 PcdSerialIoUartNumber; + +/** Offset 0x044D - ReservedPchPreMem + Reserved for Pch Pre-Mem + $EN_DIS +**/ + UINT8 ReservedPchPreMem[16]; + +/** Offset 0x045D - ISA Serial Base selection + Select ISA Serial Base address. Default is 0x3F8. + 0:0x3F8, 1:0x2F8 +**/ + UINT8 PcdIsaSerialUartBase; + +/** Offset 0x045E - GT PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 +**/ + UINT8 GtPllVoltageOffset; + +/** Offset 0x045F - Ring PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 +**/ + UINT8 RingPllVoltageOffset; + +/** Offset 0x0460 - System Agent PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 +**/ + UINT8 SaPllVoltageOffset; + +/** Offset 0x0461 - Memory Controller PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 +**/ + UINT8 McPllVoltageOffset; + +/** Offset 0x0462 - MRC Safe Config + Enables/Disable MRC Safe Config + $EN_DIS +**/ + UINT8 MrcSafeConfig; + +/** Offset 0x0463 - PcdSerialDebugBaudRate + Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. + 3:9600, 4:19200, 6:56700, 7:115200 +**/ + UINT8 PcdSerialDebugBaudRate; + +/** Offset 0x0464 - HobBufferSize + Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB + total HOB size). + 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value +**/ + UINT8 HobBufferSize; + +/** Offset 0x0465 - Early Command Training + Enables/Disable Early Command Training + $EN_DIS +**/ + UINT8 ECT; + +/** Offset 0x0466 - SenseAmp Offset Training + Enables/Disable SenseAmp Offset Training + $EN_DIS +**/ + UINT8 SOT; + +/** Offset 0x0467 - Early ReadMPR Timing Centering 2D + Enables/Disable Early ReadMPR Timing Centering 2D + $EN_DIS +**/ + UINT8 ERDMPRTC2D; + +/** Offset 0x0468 - Read MPR Training + Enables/Disable Read MPR Training + $EN_DIS +**/ + UINT8 RDMPRT; + +/** Offset 0x0469 - Receive Enable Training + Enables/Disable Receive Enable Training + $EN_DIS +**/ + UINT8 RCVET; + +/** Offset 0x046A - Jedec Write Leveling + Enables/Disable Jedec Write Leveling + $EN_DIS +**/ + UINT8 JWRL; + +/** Offset 0x046B - Early Write Time Centering 2D + Enables/Disable Early Write Time Centering 2D + $EN_DIS +**/ + UINT8 EWRTC2D; + +/** Offset 0x046C - Early Read Time Centering 2D + Enables/Disable Early Read Time Centering 2D + $EN_DIS +**/ + UINT8 ERDTC2D; + +/** Offset 0x046D - Write Timing Centering 1D + Enables/Disable Write Timing Centering 1D + $EN_DIS +**/ + UINT8 WRTC1D; + +/** Offset 0x046E - Write Voltage Centering 1D + Enables/Disable Write Voltage Centering 1D + $EN_DIS +**/ + UINT8 WRVC1D; + +/** Offset 0x046F - Read Timing Centering 1D + Enables/Disable Read Timing Centering 1D + $EN_DIS +**/ + UINT8 RDTC1D; + +/** Offset 0x0470 - Dimm ODT Training + Enables/Disable Dimm ODT Training + $EN_DIS +**/ + UINT8 DIMMODTT; + +/** Offset 0x0471 - DIMM RON Training + Enables/Disable DIMM RON Training + $EN_DIS +**/ + UINT8 DIMMRONT; + +/** Offset 0x0472 - Write Drive Strength/Equalization 2D + Enables/Disable Write Drive Strength/Equalization 2D + $EN_DIS +**/ + UINT8 WRDSEQT; + +/** Offset 0x0473 - Write Slew Rate Training + Enables/Disable Write Slew Rate Training + $EN_DIS +**/ + UINT8 WRSRT; + +/** Offset 0x0474 - Read ODT Training + Enables/Disable Read ODT Training + $EN_DIS +**/ + UINT8 RDODTT; + +/** Offset 0x0475 - Read Equalization Training + Enables/Disable Read Equalization Training + $EN_DIS +**/ + UINT8 RDEQT; + +/** Offset 0x0476 - Read Amplifier Training + Enables/Disable Read Amplifier Training + $EN_DIS +**/ + UINT8 RDAPT; + +/** Offset 0x0477 - Write Timing Centering 2D + Enables/Disable Write Timing Centering 2D + $EN_DIS +**/ + UINT8 WRTC2D; + +/** Offset 0x0478 - Read Timing Centering 2D + Enables/Disable Read Timing Centering 2D + $EN_DIS +**/ + UINT8 RDTC2D; + +/** Offset 0x0479 - Write Voltage Centering 2D + Enables/Disable Write Voltage Centering 2D + $EN_DIS +**/ + UINT8 WRVC2D; + +/** Offset 0x047A - Read Voltage Centering 2D + Enables/Disable Read Voltage Centering 2D + $EN_DIS +**/ + UINT8 RDVC2D; + +/** Offset 0x047B - Command Voltage Centering + Enables/Disable Command Voltage Centering + $EN_DIS +**/ + UINT8 CMDVC; + +/** Offset 0x047C - Late Command Training + Enables/Disable Late Command Training + $EN_DIS +**/ + UINT8 LCT; + +/** Offset 0x047D - Round Trip Latency Training + Enables/Disable Round Trip Latency Training + $EN_DIS +**/ + UINT8 RTL; + +/** Offset 0x047E - Turn Around Timing Training + Enables/Disable Turn Around Timing Training + $EN_DIS +**/ + UINT8 TAT; + +/** Offset 0x047F - Memory Test + Enables/Disable Memory Test + $EN_DIS +**/ + UINT8 MEMTST; + +/** Offset 0x0480 - DIMM SPD Alias Test + Enables/Disable DIMM SPD Alias Test + $EN_DIS +**/ + UINT8 ALIASCHK; + +/** Offset 0x0481 - Receive Enable Centering 1D + Enables/Disable Receive Enable Centering 1D + $EN_DIS +**/ + UINT8 RCVENC1D; + +/** Offset 0x0482 - Retrain Margin Check + Enables/Disable Retrain Margin Check + $EN_DIS +**/ + UINT8 RMC; + +/** Offset 0x0483 - Write Drive Strength Up/Dn independently + Enables/Disable Write Drive Strength Up/Dn independently + $EN_DIS +**/ + UINT8 WRDSUDT; + +/** Offset 0x0484 - ECC Support + Enables/Disable ECC Support + $EN_DIS +**/ + UINT8 EccSupport; + +/** Offset 0x0485 - Memory Remap + Enables/Disable Memory Remap + $EN_DIS +**/ + UINT8 RemapEnable; + +/** Offset 0x0486 - Rank Interleave support + Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at + the same time. + $EN_DIS +**/ + UINT8 RankInterleave; + +/** Offset 0x0487 - Enhanced Interleave support + Enables/Disable Enhanced Interleave support + $EN_DIS +**/ + UINT8 EnhancedInterleave; + +/** Offset 0x0488 - Memory Trace + Enable Memory Trace of Ch 0 to Ch 1 using Stacked Mode. Both channels must be of + equal size. This option may change TOLUD and REMAP values as needed. + $EN_DIS +**/ + UINT8 MemoryTrace; + +/** Offset 0x0489 - Ch Hash Support + Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode + $EN_DIS +**/ + UINT8 ChHashEnable; + +/** Offset 0x048A - Extern Therm Status + Enables/Disable Extern Therm Status + $EN_DIS +**/ + UINT8 EnableExtts; + +/** Offset 0x048B - Closed Loop Therm Manage + Enables/Disable Closed Loop Therm Manage + $EN_DIS +**/ + UINT8 EnableCltm; + +/** Offset 0x048C - Open Loop Therm Manage + Enables/Disable Open Loop Therm Manage + $EN_DIS +**/ + UINT8 EnableOltm; + +/** Offset 0x048D - DDR PowerDown and idle counter + Enables/Disable DDR PowerDown and idle counter + $EN_DIS +**/ + UINT8 EnablePwrDn; + +/** Offset 0x048E - DDR PowerDown and idle counter - LPDDR + Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) + $EN_DIS +**/ + UINT8 EnablePwrDnLpddr; + +/** Offset 0x048F - Use user provided power weights, scale factor, and channel power floor values + Enables/Disable Use user provided power weights, scale factor, and channel power + floor values + $EN_DIS +**/ + UINT8 UserPowerWeightsEn; + +/** Offset 0x0490 - RAPL PL Lock + Enables/Disable RAPL PL Lock + $EN_DIS +**/ + UINT8 RaplLim2Lock; + +/** Offset 0x0491 - RAPL PL 2 enable + Enables/Disable RAPL PL 2 enable + $EN_DIS +**/ + UINT8 RaplLim2Ena; + +/** Offset 0x0492 - RAPL PL 1 enable + Enables/Disable RAPL PL 1 enable + $EN_DIS +**/ + UINT8 RaplLim1Ena; + +/** Offset 0x0493 - SelfRefresh Enable + Enables/Disable SelfRefresh Enable + $EN_DIS +**/ + UINT8 SrefCfgEna; + +/** Offset 0x0494 - Throttler CKEMin Defeature - LPDDR + Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeatLpddr; + +/** Offset 0x0495 - Throttler CKEMin Defeature + Enables/Disable Throttler CKEMin Defeature + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeat; + +/** Offset 0x0496 - Enable RH Prevention + Enables/Disable RH Prevention + $EN_DIS +**/ + UINT8 RhPrevention; + +/** Offset 0x0497 - Exit On Failure (MRC) + Enables/Disable Exit On Failure (MRC) + $EN_DIS +**/ + UINT8 ExitOnFailure; + +/** Offset 0x0498 - LPDDR Thermal Sensor + Enables/Disable LPDDR Thermal Sensor + $EN_DIS +**/ + UINT8 DdrThermalSensor; + +/** Offset 0x0499 - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP + Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP + $EN_DIS +**/ + UINT8 Ddr4DdpSharedClock; + +/** Offset 0x049A - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + $EN_DIS +**/ + UINT8 Ddr4DdpSharedZq; + +/** Offset 0x049B +**/ + UINT8 UnusedUpdSpace7; + +/** Offset 0x049C - Ch Hash Mask + Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to + BITS [19:6 +**/ + UINT16 ChHashMask; + +/** Offset 0x049E +**/ + UINT8 UnusedUpdSpace8[2]; + +/** Offset 0x04A0 - Base reference clock value + Base reference clock value, in Hertz(Default is 125Hz) + 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz +**/ + UINT32 BClkFrequency; + +/** Offset 0x04A4 - Ch Hash Interleaved Bit + Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave + the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 + 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 +**/ + UINT8 ChHashInterleaveBit; + +/** Offset 0x04A5 - Energy Scale Factor + Energy Scale Factor, Default is 4 +**/ + UINT8 EnergyScaleFact; + +/** Offset 0x04A6 - EPG DIMM Idd3N + Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on + a per DIMM basis. Default is 26 +**/ + UINT16 Idd3n; + +/** Offset 0x04A8 - EPG DIMM Idd3P + Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated + on a per DIMM basis. Default is 11 +**/ + UINT16 Idd3p; + +/** Offset 0x04AA - CMD Slew Rate Training + Enable/Disable CMD Slew Rate Training + $EN_DIS +**/ + UINT8 CMDSR; + +/** Offset 0x04AB - CMD Drive Strength and Tx Equalization + Enable/Disable CMD Drive Strength and Tx Equalization + $EN_DIS +**/ + UINT8 CMDDSEQ; + +/** Offset 0x04AC - CMD Normalization + Enable/Disable CMD Normalization + $EN_DIS +**/ + UINT8 CMDNORM; + +/** Offset 0x04AD - Early DQ Write Drive Strength and Equalization Training + Enable/Disable Early DQ Write Drive Strength and Equalization Training + $EN_DIS +**/ + UINT8 EWRDSEQ; + +/** Offset 0x04AE - RH Activation Probability + RH Activation Probability, Probability value is 1/2^(inputvalue) +**/ + UINT8 RhActProbability; + +/** Offset 0x04AF - RAPL PL 2 WindowX + Power PL 2 time window X value, (1/1024)*(1+(x/4))*(2^y) (1=Def) +**/ + UINT8 RaplLim2WindX; + +/** Offset 0x04B0 - RAPL PL 2 WindowY + Power PL 2 time window Y value, (1/1024)*(1+(x/4))*(2^y) (1=Def) +**/ + UINT8 RaplLim2WindY; + +/** Offset 0x04B1 - RAPL PL 1 WindowX + Power PL 1 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +**/ + UINT8 RaplLim1WindX; + +/** Offset 0x04B2 - RAPL PL 1 WindowY + Power PL 1 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +**/ + UINT8 RaplLim1WindY; + +/** Offset 0x04B3 +**/ + UINT8 UnusedUpdSpace9; + +/** Offset 0x04B4 - RAPL PL 2 Power + range[0;2^14-1]= [2047.875;0]in W, (222= Def) +**/ + UINT16 RaplLim2Pwr; + +/** Offset 0x04B6 - RAPL PL 1 Power + range[0;2^14-1]= [2047.875;0]in W, (0= Def) +**/ + UINT16 RaplLim1Pwr; + +/** Offset 0x04B8 - Warm Threshold Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 +**/ + UINT8 WarmThresholdCh0Dimm0; + +/** Offset 0x04B9 - Warm Threshold Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 +**/ + UINT8 WarmThresholdCh0Dimm1; + +/** Offset 0x04BA - Warm Threshold Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 +**/ + UINT8 WarmThresholdCh1Dimm0; + +/** Offset 0x04BB - Warm Threshold Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 +**/ + UINT8 WarmThresholdCh1Dimm1; + +/** Offset 0x04BC - Hot Threshold Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 +**/ + UINT8 HotThresholdCh0Dimm0; + +/** Offset 0x04BD - Hot Threshold Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 +**/ + UINT8 HotThresholdCh0Dimm1; + +/** Offset 0x04BE - Hot Threshold Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 +**/ + UINT8 HotThresholdCh1Dimm0; + +/** Offset 0x04BF - Hot Threshold Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 +**/ + UINT8 HotThresholdCh1Dimm1; + +/** Offset 0x04C0 - Warm Budget Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh0Dimm0; + +/** Offset 0x04C1 - Warm Budget Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh0Dimm1; + +/** Offset 0x04C2 - Warm Budget Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh1Dimm0; + +/** Offset 0x04C3 - Warm Budget Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh1Dimm1; + +/** Offset 0x04C4 - Hot Budget Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh0Dimm0; + +/** Offset 0x04C5 - Hot Budget Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh0Dimm1; + +/** Offset 0x04C6 - Hot Budget Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh1Dimm0; + +/** Offset 0x04C7 - Hot Budget Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh1Dimm1; + +/** Offset 0x04C8 - Idle Energy Ch0Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh0Dimm0; + +/** Offset 0x04C9 - Idle Energy Ch0Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh0Dimm1; + +/** Offset 0x04CA - Idle Energy Ch1Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh1Dimm0; + +/** Offset 0x04CB - Idle Energy Ch1Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh1Dimm1; + +/** Offset 0x04CC - PowerDown Energy Ch0Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) +**/ + UINT8 PdEnergyCh0Dimm0; + +/** Offset 0x04CD - PowerDown Energy Ch0Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) +**/ + UINT8 PdEnergyCh0Dimm1; + +/** Offset 0x04CE - PowerDown Energy Ch1Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) +**/ + UINT8 PdEnergyCh1Dimm0; + +/** Offset 0x04CF - PowerDown Energy Ch1Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) +**/ + UINT8 PdEnergyCh1Dimm1; + +/** Offset 0x04D0 - Activate Energy Ch0Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh0Dimm0; + +/** Offset 0x04D1 - Activate Energy Ch0Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh0Dimm1; + +/** Offset 0x04D2 - Activate Energy Ch1Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh1Dimm0; + +/** Offset 0x04D3 - Activate Energy Ch1Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh1Dimm1; + +/** Offset 0x04D4 - Read Energy Ch0Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh0Dimm0; + +/** Offset 0x04D5 - Read Energy Ch0Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh0Dimm1; + +/** Offset 0x04D6 - Read Energy Ch1Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh1Dimm0; + +/** Offset 0x04D7 - Read Energy Ch1Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh1Dimm1; + +/** Offset 0x04D8 - Write Energy Ch0Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh0Dimm0; + +/** Offset 0x04D9 - Write Energy Ch0Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh0Dimm1; + +/** Offset 0x04DA - Write Energy Ch1Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh1Dimm0; + +/** Offset 0x04DB - Write Energy Ch1Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh1Dimm1; + +/** Offset 0x04DC - Throttler CKEMin Timer + Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). + Default is 0x30 +**/ + UINT8 ThrtCkeMinTmr; + +/** Offset 0x04DD - Cke Rank Mapping + Bits [7:4] - Channel 1, bits [3:0] - Channel 0. <b>0xAA=Default</b> Bit [i] specifies + which rank CKE[i] goes to. +**/ + UINT8 CkeRankMapping; + +/** Offset 0x04DE - Rapl Power Floor Ch0 + Power budget ,range[255;0],(0= 5.3W Def) +**/ + UINT8 RaplPwrFlCh0; + +/** Offset 0x04DF - Rapl Power Floor Ch1 + Power budget ,range[255;0],(0= 5.3W Def) +**/ + UINT8 RaplPwrFlCh1; + +/** Offset 0x04E0 - Command Rate Support + CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs + 0:Disable, 1:1 CMD, 2:2 CMDS, 3:3 CMDS, 4:4 CMDS, 5:5 CMDS, 6:6 CMDS, 7:7 CMDS +**/ + UINT8 EnCmdRate; + +/** Offset 0x04E1 - REFRESH_2X_MODE + 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot + 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only +**/ + UINT8 Refresh2X; + +/** Offset 0x04E2 - Energy Performance Gain + Enable/disable(default) Energy Performance Gain. + $EN_DIS +**/ + UINT8 EpgEnable; + +/** Offset 0x04E3 - Row Hammer Solution + Type of method used to prevent Row Hammer. Default is Hardware RHP + 0:Hardware RHP, 1:2x Refresh +**/ + UINT8 RhSolution; + +/** Offset 0x04E4 - User Manual Threshold + Disabled: Predefined threshold will be used.\n + Enabled: User Input will be used. + $EN_DIS +**/ + UINT8 UserThresholdEnable; + +/** Offset 0x04E5 - User Manual Budget + Disabled: Configuration of memories will defined the Budget value.\n + Enabled: User Input will be used. + $EN_DIS +**/ + UINT8 UserBudgetEnable; + +/** Offset 0x04E6 - TcritMax + Maximum Critical Temperature in Centigrade of the On-DIMM Thermal Sensor. TCRITMax + has to be greater than THIGHMax .\n + Critical temperature will be TcritMax +**/ + UINT8 TsodTcritMax; + +/** Offset 0x04E7 - Event mode + Disable:Comparator mode.\n + Enable:Interrupt mode + $EN_DIS +**/ + UINT8 TsodEventMode; + +/** Offset 0x04E8 - EVENT polarity + Disable:Active LOW.\n + Enable:Active HIGH + $EN_DIS +**/ + UINT8 TsodEventPolarity; + +/** Offset 0x04E9 - Critical event only + Disable:Trips on alarm or critical.\n + Enable:Trips only if criticaal temperature is reached + $EN_DIS +**/ + UINT8 TsodCriticalEventOnly; + +/** Offset 0x04EA - Event output control + Disable:Event output disable.\n + Enable:Event output enabled + $EN_DIS +**/ + UINT8 TsodEventOutputControl; + +/** Offset 0x04EB - Alarm window lock bit + Disable:Alarm trips are not locked and can be changed.\n + Enable:Alarm trips are locked and cannot be changed + $EN_DIS +**/ + UINT8 TsodAlarmwindowLockBit; + +/** Offset 0x04EC - Critical trip lock bit + Disable:Critical trip is not locked and can be changed.\n + Enable:Critical trip is locked and cannot be changed + $EN_DIS +**/ + UINT8 TsodCriticaltripLockBit; + +/** Offset 0x04ED - Shutdown mode + Disable:Temperature sensor enable.\n + Enable:Temperature sensor disable + $EN_DIS +**/ + UINT8 TsodShutdownMode; + +/** Offset 0x04EE - ThighMax + Thigh = ThighMax (Default is 93) +**/ + UINT8 TsodThigMax; + +/** Offset 0x04EF - User Manual Thig and Tcrit + Disabled(Default): Temperature will be given by the configuration of memories and + 1x or 2xrefresh rate.\n + Enabled: User Input will define for Thigh and Tcrit. + $EN_DIS +**/ + UINT8 TsodManualEnable; + +/** Offset 0x04F0 - Force OLTM or 2X Refresh when needed + Disabled(Default): = Force OLTM.\n + Enabled: = Force 2x Refresh. + $EN_DIS +**/ + UINT8 ForceOltmOrRefresh2x; + +/** Offset 0x04F1 - Pwr Down Idle Timer + The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means + AUTO: 64 for ULX/ULT, 128 for DT/Halo +**/ + UINT8 PwdwnIdleCounter; + +/** Offset 0x04F2 - Bitmask of ranks that have CA bus terminated + Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default, + Rank0 is terminating and Rank1 is non-terminating</b> +**/ + UINT8 CmdRanksTerminated; + +/** Offset 0x04F3 - GDXC MOT enable + GDXC MOT enable. + $EN_DIS +**/ + UINT8 GdxcEnable; + +/** Offset 0x04F4 - PcdSerialDebugLevel + Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info, 5:Load Error Warnings Info and Verbose +**/ + UINT8 PcdSerialDebugLevel; + +/** Offset 0x04F5 - Fivr Faults + Fivr Faults; 0: Disabled; <b>1: Enabled.</b> + $EN_DIS +**/ + UINT8 FivrFaults; + +/** Offset 0x04F6 - Fivr Efficiency + Fivr Efficiency Management; 0: Disabled; <b>1: Enabled.</b> + $EN_DIS +**/ + UINT8 FivrEfficiency; + +/** Offset 0x04F7 - Safe Mode Support + This option configures the varous items in the IO and MC to be more conservative.(def=Disable) + $EN_DIS +**/ + UINT8 SafeMode; + +/** Offset 0x04F8 - Ask MRC to clear memory content + Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory. + $EN_DIS +**/ + UINT8 CleanMemory; + +/** Offset 0x04F9 - LpDdrDqDqsReTraining + Enables/Disable LpDdrDqDqsReTraining + $EN_DIS +**/ + UINT8 LpDdrDqDqsReTraining; + +/** Offset 0x04FA - Post Code Output Port + This option configures Post Code Output Port +**/ + UINT16 PostCodeOutputPort; + +/** Offset 0x04FC - RMTLoopCount + Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO +**/ + UINT8 RMTLoopCount; + +/** Offset 0x04FD - BER Support + Enable/Disable the Rank Margin Tool interpolation/extrapolation. + 0:Disable, 1:Enable +**/ + UINT8 EnBER; + +/** Offset 0x04FE - Dual Dimm Per-Channel Board Type + Option to indicate if Board Layout includes One/Two DIMMs per channel. This is used + to limit maximum frequency for some SKUs. + 0:1DPC, 1:2DPC +**/ + UINT8 DualDimmPerChannelBoardType; + +/** Offset 0x04FF - DDR4 Mixed U-DIMM 2DPC Limitation + Enable/Disable 2667 Frequency Limitation for DDR4 U-DIMM Mixed Dimm 2DPC population. + Disable=0, Enable(Default)=1 + $EN_DIS +**/ + UINT8 Ddr4MixedUDimm2DpcLimit; + +/** Offset 0x0500 - CFL Reserved + Reserved FspmConfig CFL + $EN_DIS +**/ + UINT8 ReservedFspmUpdCfl[2]; + +/** Offset 0x0502 - Memory Test on Warm Boot + Run Base Memory Test on Warm Boot + 0:Disable, 1:Enable +**/ + UINT8 MemTestOnWarmBoot; + +/** Offset 0x0503 - Throttler CKEMin Timer - LPDDR + Timer value for CKEMin (For LPDDR Only), range[255;0]. Req'd min of SC_ROUND_T + + BYTE_LENGTH (4). Default is 0x40 +**/ + UINT8 ThrtCkeMinTmrLpddr; + +/** Offset 0x0504 - State of X2APIC_OPT_OUT bit in the DMAR table + 0=Disable/Clear, 1=Enable/Set + $EN_DIS +**/ + UINT8 X2ApicOptOut; + +/** Offset 0x0505 +**/ + UINT8 UnusedUpdSpace10[2]; + +/** Offset 0x0507 +**/ + UINT8 ReservedFspmUpd[9]; +} FSP_M_CONFIG; + +/** Fsp M Test Configuration +**/ +typedef struct { + +/** Offset 0x0510 +**/ + UINT32 Signature; + +/** Offset 0x0514 - Skip external display device scanning + Enable: Do not scan for external display device, Disable (Default): Scan external + display devices + $EN_DIS +**/ + UINT8 SkipExtGfxScan; + +/** Offset 0x0515 - Generate BIOS Data ACPI Table + Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it + $EN_DIS +**/ + UINT8 BdatEnable; + +/** Offset 0x0516 - Detect External Graphics device for LegacyOpROM + Detect and report if external graphics device only support LegacyOpROM or not (to + support CSM auto-enable). Enable(Default)=1, Disable=0 + $EN_DIS +**/ + UINT8 ScanExtGfxForLegacyOpRom; + +/** Offset 0x0517 - Lock PCU Thermal Management registers + Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0 + $EN_DIS +**/ + UINT8 LockPTMregs; + +/** Offset 0x0518 - DMI Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 DmiMaxLinkSpeed; + +/** Offset 0x0519 - DMI Equalization Phase 2 + DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default): + AUTO - Use the current default method + 0:Disable phase2, 1:Enable phase2, 2:Auto +**/ + UINT8 DmiGen3EqPh2Enable; + +/** Offset 0x051A - DMI Gen3 Equalization Phase3 + DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 DmiGen3EqPh3Method; + +/** Offset 0x051B - Phase2 EQ enable on the PEG 0:1:0. + Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): + Enable phase 2, Auto(0x2)(Default): Use the current default method + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Peg0Gen3EqPh2Enable; + +/** Offset 0x051C - Phase2 EQ enable on the PEG 0:1:1. + Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): + Enable phase 2, Auto(0x2)(Default): Use the current default method + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Peg1Gen3EqPh2Enable; + +/** Offset 0x051D - Phase2 EQ enable on the PEG 0:1:2. + Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): + Enable phase 2, Auto(0x2)(Default): Use the current default method + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Peg2Gen3EqPh2Enable; + +/** Offset 0x051E - Phase2 EQ enable on the PEG 0:1:3. + Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): + Enable phase 2, Auto(0x2)(Default): Use the current default method + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Peg3Gen3EqPh2Enable; + +/** Offset 0x051F - Phase3 EQ method on the PEG 0:1:0. + PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 Peg0Gen3EqPh3Method; + +/** Offset 0x0520 - Phase3 EQ method on the PEG 0:1:1. + PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 Peg1Gen3EqPh3Method; + +/** Offset 0x0521 - Phase3 EQ method on the PEG 0:1:2. + PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 Peg2Gen3EqPh3Method; + +/** Offset 0x0522 - Phase3 EQ method on the PEG 0:1:3. + PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 Peg3Gen3EqPh3Method; + +/** Offset 0x0523 - Enable/Disable PEG GEN3 Static EQ Phase1 programming + Program PEG Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static + Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 PegGen3ProgramStaticEq; + +/** Offset 0x0524 - PEG Gen3 SwEq Always Attempt + Gen3 Software Equalization will be executed every boot. Disabled(0x0)(Default): + Reuse EQ settings saved/restored from NVRAM whenever possible, Enabled(0x1): Re-test + and generate new EQ values every boot, not recommended + 0:Disable, 1:Enable +**/ + UINT8 Gen3SwEqAlwaysAttempt; + +/** Offset 0x0525 - Select number of TxEq presets to test in the PCIe/DMI SwEq + Select number of TxEq presets to test in the PCIe/DMI SwEq. P7,P3,P5(0x0): Test + Presets 7, 3, and 5, P0-P9(0x1): Test Presets 0-9, Auto(0x2)(Default): Use the + current default method (Default)Auto will test Presets 7, 3, and 5. It is possible + for this default to change over time;using Auto will ensure Reference Code always + uses the latest default settings + 0:P7 P3 P5, 1:P0 to P9, 2:Auto +**/ + UINT8 Gen3SwEqNumberOfPresets; + +/** Offset 0x0526 - Enable use of the Voltage Offset and Centering Test in the PCIe SwEq + Enable use of the Voltage Offset and Centering Test in the PCIe Software Equalization + Algorithm. Disabled(0x0): Disable VOC Test, Enabled(0x1): Enable VOC Test, Auto(0x2)(Default): + Use the current default + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Gen3SwEqEnableVocTest; + +/** Offset 0x0527 - PCIe Rx Compliance Testing Mode + Disabled(0x0)(Default): Normal Operation - Disable PCIe Rx Compliance testing, Enabled(0x1): + PCIe Rx Compliance Test Mode - PEG controller is in Rx Compliance Testing Mode; + it should only be set when doing PCIe compliance testing + $EN_DIS +**/ + UINT8 PegRxCemTestingMode; + +/** Offset 0x0528 - PCIe Rx Compliance Loopback Lane When PegRxCemTestingMode is Enabled + the specificied Lane (0 - 15) will be used for RxCEMLoopback. Default is Lane 0 +**/ + UINT8 PegRxCemLoopbackLane; + +/** Offset 0x0529 - Generate PCIe BDAT Margin Table + Set this policy to enable the generation and addition of PCIe margin data to the + BDAT table. Disabled(0x0)(Default): Normal Operation - Disable PCIe BDAT margin + data generation, Enable(0x1): Generate PCIe BDAT margin data + $EN_DIS +**/ + UINT8 PegGenerateBdatMarginTable; + +/** Offset 0x052A - PCIe Non-Protocol Awareness for Rx Compliance Testing + Set this policy to enable the generation and addition of PCIe margin data to the + BDAT table. Disabled(0x0)(Default): Normal Operation - Disable non-protocol awareness, + Enable(0x1): Non-Protocol Awareness Enabled - Enable non-protocol awareness for + compliance testing + $EN_DIS +**/ + UINT8 PegRxCemNonProtocolAwareness; + +/** Offset 0x052B - PCIe Override RxCTLE + Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): + Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE + peak values unmodified + $EN_DIS +**/ + UINT8 PegGen3RxCtleOverride; + +/** Offset 0x052C - Rsvd + Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): + Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE + peak values unmodified + $EN_DIS +**/ + UINT8 PegGen3Rsvd; + +/** Offset 0x052D - PEG Gen3 Root port preset values per lane + Used for programming PEG Gen3 preset values per lane. Range: 0-9, 8 is default for each lane +**/ + UINT8 PegGen3RootPortPreset[20]; + +/** Offset 0x0541 - PEG Gen3 End port preset values per lane + Used for programming PEG Gen3 preset values per lane. Range: 0-9, 7 is default for each lane +**/ + UINT8 PegGen3EndPointPreset[20]; + +/** Offset 0x0555 - PEG Gen3 End port Hint values per lane + Used for programming PEG Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 PegGen3EndPointHint[20]; + +/** Offset 0x0569 +**/ + UINT8 UnusedUpdSpace11; + +/** Offset 0x056A - Jitter Dwell Time for PCIe Gen3 Software Equalization + Range: 0-65535, default is 1000. @warning Do not change from the default +**/ + UINT16 Gen3SwEqJitterDwellTime; + +/** Offset 0x056C - Jitter Error Target for PCIe Gen3 Software Equalization + Range: 0-65535, default is 1. @warning Do not change from the default +**/ + UINT16 Gen3SwEqJitterErrorTarget; + +/** Offset 0x056E - VOC Dwell Time for PCIe Gen3 Software Equalization + Range: 0-65535, default is 10000. @warning Do not change from the default +**/ + UINT16 Gen3SwEqVocDwellTime; + +/** Offset 0x0570 - VOC Error Target for PCIe Gen3 Software Equalization + Range: 0-65535, default is 2. @warning Do not change from the default +**/ + UINT16 Gen3SwEqVocErrorTarget; + +/** Offset 0x0572 - Panel Power Enable + Control for enabling/disabling VDD force bit (Required only for early enabling of + eDP panel). 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 PanelPowerEnable; + +/** Offset 0x0573 - BdatTestType + Indicates the type of Memory Training data to populate into the BDAT ACPI table. + 0:Rank Margin Tool, 1:Margin2D +**/ + UINT8 BdatTestType; + +/** Offset 0x0574 - Disable VT-d + 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) + $EN_DIS +**/ + UINT8 VtdDisable; + +/** Offset 0x0575 +**/ + UINT8 UnusedUpdSpace12; + +/** Offset 0x0576 - Delta T12 Power Cycle Delay required in ms + Select the value for delay required. 0(Default)= No delay, 0xFFFF = Auto calculate + T12 Delay to max 500ms + 0 : No Delay, 0xFFFF : Auto Calulate T12 Delay +**/ + UINT16 DeltaT12PowerCycleDelayPreMem; + +/** Offset 0x0578 - SaPreMemTestRsvd + Reserved for SA Pre-Mem Test + $EN_DIS +**/ + UINT8 SaPreMemTestRsvd[9]; + +/** Offset 0x0581 +**/ + UINT8 UnusedUpdSpace13; + +/** Offset 0x0582 - TotalFlashSize + Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable +**/ + UINT16 TotalFlashSize; + +/** Offset 0x0584 - BiosSize + Enable/Disable. 0: Disable, define default value of BiosSize , 1: enable +**/ + UINT16 BiosSize; + +/** Offset 0x0586 - TxtAcheckRequest + Enable/Disable. When Enabled, it will forcing calling TXT Acheck once. + $EN_DIS +**/ + UINT8 TxtAcheckRequest; + +/** Offset 0x0587 - SecurityTestRsvd + Reserved for SA Pre-Mem Test + $EN_DIS +**/ + UINT8 SecurityTestRsvd[3]; + +/** Offset 0x058A - Smbus dynamic power gating + Disable or Enable Smbus dynamic power gating. + $EN_DIS +**/ + UINT8 SmbusDynamicPowerGating; + +/** Offset 0x058B - Disable and Lock Watch Dog Register + Set 1 to clear WDT status, then disable and lock WDT registers. + $EN_DIS +**/ + UINT8 WdtDisableAndLock; + +/** Offset 0x058C - SMBUS SPD Write Disable + Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write + Disable bit. For security recommendations, SPD write disable bit must be set. + $EN_DIS +**/ + UINT8 SmbusSpdWriteDisable; + +/** Offset 0x058D - ReservedPchPreMemTest + Reserved for Pch Pre-Mem Test + $EN_DIS +**/ + UINT8 ReservedPchPreMemTest[16]; + +/** Offset 0x059D - Force ME DID Init Status + Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set + ME DID init stat value + $EN_DIS +**/ + UINT8 DidInitStat; + +/** Offset 0x059E - CPU Replaced Polling Disable + Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop + $EN_DIS +**/ + UINT8 DisableCpuReplacedPolling; + +/** Offset 0x059F - ME DID Message + Test, 0: disable, 1: enable, Enable/Disable ME DID Message (disable will prevent + the DID message from being sent) + $EN_DIS +**/ + UINT8 SendDidMsg; + +/** Offset 0x05A0 - Check HECI message before send + Test, 0: disable, 1: enable, Enable/Disable message check. + $EN_DIS +**/ + UINT8 DisableMessageCheck; + +/** Offset 0x05A1 - Skip MBP HOB + Test, 0: disable, 1: enable, Enable/Disable MOB HOB. + $EN_DIS +**/ + UINT8 SkipMbpHob; + +/** Offset 0x05A2 - HECI2 Interface Communication + Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. + $EN_DIS +**/ + UINT8 HeciCommunication2; + +/** Offset 0x05A3 - Enable KT device + Test, 0: disable, 1: enable, Enable or Disable KT device. + $EN_DIS +**/ + UINT8 KtDeviceEnable; + +/** Offset 0x05A4 - tRd2RdSG + Delay between Read-to-Read commands in the same Bank Group. 0-Auto, Range 4-54. +**/ + UINT8 tRd2RdSG; + +/** Offset 0x05A5 - tRd2RdDG + Delay between Read-to-Read commands in different Bank Group for DDR4. All other + DDR technologies should set this equal to SG. 0-Auto, Range 4-54. +**/ + UINT8 tRd2RdDG; + +/** Offset 0x05A6 - tRd2RdDR + Delay between Read-to-Read commands in different Ranks. 0-Auto, Range 4-54. +**/ + UINT8 tRd2RdDR; + +/** Offset 0x05A7 - tRd2RdDD + Delay between Read-to-Read commands in different DIMMs. 0-Auto, Range 4-54. +**/ + UINT8 tRd2RdDD; + +/** Offset 0x05A8 - tWr2RdSG + Delay between Write-to-Read commands in the same Bank Group. 0-Auto, Range 4-86. +**/ + UINT8 tWr2RdSG; + +/** Offset 0x05A9 - tWr2RdDG + Delay between Write-to-Read commands in different Bank Group for DDR4. All other + DDR technologies should set this equal to SG. 0-Auto, Range 4-54. +**/ + UINT8 tWr2RdDG; + +/** Offset 0x05AA - tWr2RdDR + Delay between Write-to-Read commands in different Ranks. 0-Auto, Range 4-54. +**/ + UINT8 tWr2RdDR; + +/** Offset 0x05AB - tWr2RdDD + Delay between Write-to-Read commands in different DIMMs. 0-Auto, Range 4-54. +**/ + UINT8 tWr2RdDD; + +/** Offset 0x05AC - tWr2WrSG + Delay between Write-to-Write commands in the same Bank Group. 0-Auto, Range 4-54. +**/ + UINT8 tWr2WrSG; + +/** Offset 0x05AD - tWr2WrDG + Delay between Write-to-Write commands in different Bank Group for DDR4. All other + DDR technologies should set this equal to SG. 0-Auto, Range 4-54. +**/ + UINT8 tWr2WrDG; + +/** Offset 0x05AE - tWr2WrDR + Delay between Write-to-Write commands in different Ranks. 0-Auto, Range 4-54. +**/ + UINT8 tWr2WrDR; + +/** Offset 0x05AF - tWr2WrDD + Delay between Write-to-Write commands in different DIMMs. 0-Auto, Range 4-54. +**/ + UINT8 tWr2WrDD; + +/** Offset 0x05B0 - tRd2WrSG + Delay between Read-to-Write commands in the same Bank Group. 0-Auto, Range 4-54. +**/ + UINT8 tRd2WrSG; + +/** Offset 0x05B1 - tRd2WrDG + Delay between Read-to-Write commands in different Bank Group for DDR4. All other + DDR technologies should set this equal to SG. 0-Auto, Range 4-54. +**/ + UINT8 tRd2WrDG; + +/** Offset 0x05B2 - tRd2WrDR + Delay between Read-to-Write commands in different Ranks. 0-Auto, Range 4-54. +**/ + UINT8 tRd2WrDR; + +/** Offset 0x05B3 - tRd2WrDD + Delay between Read-to-Write commands in different DIMMs. 0-Auto, Range 4-54. +**/ + UINT8 tRd2WrDD; + +/** Offset 0x05B4 - tRRD_L + Min Row Active to Row Active Delay Time for Same Bank Group, DDR4 Only. 0: AUTO, max: 31 +**/ + UINT8 tRRD_L; + +/** Offset 0x05B5 - tRRD_S + Min Row Active to Row Active Delay Time for Different Bank Group, DDR4 Only. 0: + AUTO, max: 31 +**/ + UINT8 tRRD_S; + +/** Offset 0x05B6 - tWTR_L + Min Internal Write to Read Command Delay Time for Same Bank Group, DDR4 Only. 0: + AUTO, max: 60 +**/ + UINT8 tWTR_L; + +/** Offset 0x05B7 - tWTR_S + Min Internal Write to Read Command Delay Time for Different Bank Group, DDR4 Only. + 0: AUTO, max: 28 +**/ + UINT8 tWTR_S; + +/** Offset 0x05B8 +**/ + UINT8 ReservedFspmTestUpd[4]; +} FSP_M_TEST_CONFIG; + +/** Fsp M UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPM_ARCH_UPD FspmArchUpd; + +/** Offset 0x0040 +**/ + FSP_M_CONFIG FspmConfig; + +/** Offset 0x0510 +**/ + FSP_M_TEST_CONFIG FspmTestConfig; + +/** Offset 0x05BC +**/ + UINT32 UpdTerminator; +} FSPM_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspsUpd.h new file mode 100644 index 0000000..e83fe10 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspsUpd.h @@ -0,0 +1,3440 @@ +/** @file + +Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPSUPD_H__ +#define __FSPSUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +/// +/// Azalia Header structure +/// +typedef struct { + UINT16 VendorId; ///< Codec Vendor ID + UINT16 DeviceId; ///< Codec Device ID + UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision. + UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI. + UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer. + UINT32 Reserved; ///< Reserved for future use. Must be set to 0. +} AZALIA_HEADER; + +/// +/// Audio Azalia Verb Table structure +/// +typedef struct { + AZALIA_HEADER Header; ///< AZALIA PCH header + UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header +} AUDIO_AZALIA_VERB_TABLE; + +/// +/// Refer to the definition of PCH_INT_PIN +/// +typedef enum { + SiPchNoInt, ///< No Interrupt Pin + SiPchIntA, + SiPchIntB, + SiPchIntC, + SiPchIntD +} SI_PCH_INT_PIN; +/// +/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device. +/// +typedef struct { + UINT8 Device; ///< Device number + UINT8 Function; ///< Device function + UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN) + UINT8 Irq; ///< IRQ to be set for device. +} SI_PCH_DEVICE_INTERRUPT_CONFIG; + +#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices + + +/** Fsp S Configuration +**/ +typedef struct { + +/** Offset 0x0020 - Logo Pointer + Points to PEI Display Logo Image +**/ + UINT32 LogoPtr; + +/** Offset 0x0024 - Logo Size + Size of PEI Display Logo Image +**/ + UINT32 LogoSize; + +/** Offset 0x0028 - Graphics Configuration Ptr + Points to VBT +**/ + UINT32 GraphicsConfigPtr; + +/** Offset 0x002C - Enable Device 4 + Enable/disable Device 4 + $EN_DIS +**/ + UINT8 Device4Enable; + +/** Offset 0x002D +**/ + UINT8 UnusedUpdSpace0[3]; + +/** Offset 0x0030 - MicrocodeRegionBase + Memory Base of Microcode Updates +**/ + UINT32 MicrocodeRegionBase; + +/** Offset 0x0034 - MicrocodeRegionSize + Size of Microcode Updates +**/ + UINT32 MicrocodeRegionSize; + +/** Offset 0x0038 - Turbo Mode + Enable/Disable Turbo mode. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 TurboMode; + +/** Offset 0x0039 - PchDmiCwbEnable + Central Write Buffer feature configurable and disabled by default + $EN_DIS +**/ + UINT8 PchDmiCwbEnable; + +/** Offset 0x003A - HECI3 state + The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed. + 0: disable, 1: enable + $EN_DIS +**/ + UINT8 Heci3Enabled; + +/** Offset 0x003B - AMT Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality. + $EN_DIS +**/ + UINT8 AmtEnabled; + +/** Offset 0x003C - WatchDog Timer Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer. Setting + is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 WatchDogEnabled; + +/** Offset 0x003D - Manageability Mode set by Mebx + Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode. + $EN_DIS +**/ + UINT8 ManageabilityMode; + +/** Offset 0x003E - PET Progress + Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive + PET Events. Setting is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 FwProgress; + +/** Offset 0x003F - SOL Switch + Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx. + Setting is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 AmtSolEnabled; + +/** Offset 0x0040 - OS Timer + 16 bits Value, Set OS watchdog timer. Setting is invalid if AmtEnabled is 0. +**/ + UINT16 WatchDogTimerOs; + +/** Offset 0x0042 - BIOS Timer + 16 bits Value, Set BIOS watchdog timer. Setting is invalid if AmtEnabled is 0. +**/ + UINT16 WatchDogTimerBios; + +/** Offset 0x0044 - Remote Assistance Trigger Availablilty + Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx. + $EN_DIS +**/ + UINT8 RemoteAssistance; + +/** Offset 0x0045 - KVM Switch + Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx. Setting + is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 AmtKvmEnabled; + +/** Offset 0x0046 - MEBX execution + Enable/Disable. 0: Disable, 1: enable, Force MEBX execution. + $EN_DIS +**/ + UINT8 ForcMebxSyncUp; + +/** Offset 0x0047 - Enable/Disable SA CRID + Enable: SA CRID, Disable (Default): SA CRID + $EN_DIS +**/ + UINT8 CridEnable; + +/** Offset 0x0048 - DMI ASPM + 0=Disable, 1:L0s, 2:L1, 3(Default)=L0sL1 + 0:Disable, 1:L0s, 2:L1, 3:L0sL1 +**/ + UINT8 DmiAspm; + +/** Offset 0x0049 - PCIe DeEmphasis control per root port + 0: -6dB, 1(Default): -3.5dB + 0:-6dB, 1:-3.5dB +**/ + UINT8 PegDeEmphasis[4]; + +/** Offset 0x004D - PCIe Slot Power Limit value per root port + Slot power limit value per root port +**/ + UINT8 PegSlotPowerLimitValue[4]; + +/** Offset 0x0051 - PCIe Slot Power Limit scale per root port + Slot power limit scale per root port + 0:1.0x, 1:0.1x, 2:0.01x, 3:0x001x +**/ + UINT8 PegSlotPowerLimitScale[4]; + +/** Offset 0x0055 +**/ + UINT8 UnusedUpdSpace1[1]; + +/** Offset 0x0056 - PCIe Physical Slot Number per root port + Physical Slot Number per root port +**/ + UINT16 PegPhysicalSlotNumber[4]; + +/** Offset 0x005E - Enable/Disable PavpEnable + Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable + $EN_DIS +**/ + UINT8 PavpEnable; + +/** Offset 0x005F - CdClock Frequency selection + 0=337.5 Mhz, 1=450 Mhz, 2=540 Mhz, 3(Default)=675 Mhz + 0: 337.5 Mhz, 1: 450 Mhz, 2: 540 Mhz, 3: 675 Mhz +**/ + UINT8 CdClock; + +/** Offset 0x0060 - Enable/Disable PeiGraphicsPeimInit + Enable: Enable PeiGraphicsPeimInit, Disable(Default): Disable PeiGraphicsPeimInit + $EN_DIS +**/ + UINT8 PeiGraphicsPeimInit; + +/** Offset 0x0061 - Enable or disable GNA device + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 GnaEnable; + +/** Offset 0x0062 - State of X2APIC_OPT_OUT bit in the DMAR table + 0=Disable/Clear, 1=Enable/Set + $EN_DIS +**/ + UINT8 X2ApicOptOutDeprecated; + +/** Offset 0x0063 +**/ + UINT8 UnusedUpdSpace2[1]; + +/** Offset 0x0064 - Base addresses for VT-d function MMIO access + Base addresses for VT-d MMIO access per VT-d engine +**/ + UINT32 VtdBaseAddressDeprecated[3]; + +/** Offset 0x0070 - Enable or disable eDP device + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortEdp; + +/** Offset 0x0071 - Enable or disable HPD of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBHpd; + +/** Offset 0x0072 - Enable or disable HPD of DDI port C + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortCHpd; + +/** Offset 0x0073 - Enable or disable HPD of DDI port D + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortDHpd; + +/** Offset 0x0074 - Enable or disable HPD of DDI port F + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortFHpd; + +/** Offset 0x0075 - Enable or disable DDC of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBDdc; + +/** Offset 0x0076 - Enable or disable DDC of DDI port C + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortCDdc; + +/** Offset 0x0077 - Enable or disable DDC of DDI port D + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortDDdc; + +/** Offset 0x0078 - Enable or disable DDC of DDI port F + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortFDdc; + +/** Offset 0x0079 - Enable/Disable SkipS3CdClockInit + Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full + CD clock in S3 resume due to GOP absent + $EN_DIS +**/ + UINT8 SkipS3CdClockInit; + +/** Offset 0x007A - Delta T12 Power Cycle Delay required in ms + DEPRECATED + 0 : No Delay, 0xFFFF : Auto Calulate T12 Delay +**/ + UINT16 DeltaT12PowerCycleDelay; + +/** Offset 0x007C - Blt Buffer Address + Address of Blt buffer +**/ + UINT32 BltBufferAddress; + +/** Offset 0x0080 - Blt Buffer Size + Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of + EFI_GRAPHICS_OUTPUT_BLT_PIXEL) +**/ + UINT32 BltBufferSize; + +/** Offset 0x0084 - SaPostMemProductionRsvd + Reserved for SA Post-Mem Production + $EN_DIS +**/ + UINT8 SaPostMemProductionRsvd[35]; + +/** Offset 0x00A7 - PCIE RP Disable Gen2PLL Shutdown and L1 Clock Gating Enable + PCIE RP Disable Gen2PLL Shutdown and L1 Clock Gating Enable Workaround needed for + Alpine ridge +**/ + UINT8 PcieRootPortGen2PllL1CgDisable[24]; + +/** Offset 0x00BF - Advanced Encryption Standard (AES) feature + Enable or Disable Advanced Encryption Standard (AES) feature; </b>0: Disable; <b>1: Enable + $EN_DIS +**/ + UINT8 AesEnable; + +/** Offset 0x00C0 - Power State 3 enable/disable + PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; <b>1: Enable</b>. + For all VR Indexes +**/ + UINT8 Psi3Enable[5]; + +/** Offset 0x00C5 - Power State 4 enable/disable + PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; <b>1: Enable</b>.For + all VR Indexes +**/ + UINT8 Psi4Enable[5]; + +/** Offset 0x00CA - Imon slope correction + PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values. + Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes +**/ + UINT8 ImonSlope[5]; + +/** Offset 0x00CF - Imon offset correction + DEPRECATED +**/ + UINT8 ImonOffset[5]; + +/** Offset 0x00D4 - Enable/Disable BIOS configuration of VR + Enable/Disable BIOS configuration of VR; <b>0: Disable</b>; 1: Enable.For all VR Indexes +**/ + UINT8 VrConfigEnable[5]; + +/** Offset 0x00D9 - Thermal Design Current enable/disable + PCODE MMIO Mailbox: Thermal Design Current enable/disable; <b>0: Disable</b>; 1: + Enable.For all VR Indexes +**/ + UINT8 TdcEnable[5]; + +/** Offset 0x00DE - HECI3 state + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + Valid Values 1 - 1ms , 2 - 2ms , 3 - 3ms , 4 - 4ms , 5 - 5ms , 6 - 6ms , 7 - 7ms + , 8 - 8ms , 10 - 10ms.For all VR Indexe +**/ + UINT8 TdcTimeWindow[5]; + +/** Offset 0x00E3 - Thermal Design Current Lock + PCODE MMIO Mailbox: Thermal Design Current Lock; <b>0: Disable</b>; 1: Enable.For + all VR Indexes +**/ + UINT8 TdcLock[5]; + +/** Offset 0x00E8 - Platform Psys slope correction + PCODE MMIO Mailbox: Platform Psys slope correction. <b>0 - Auto</b> Specified in + 1/100 increment values. Range is 0-200. 125 = 1.25 +**/ + UINT8 PsysSlope; + +/** Offset 0x00E9 - Platform Psys offset correction + PCODE MMIO Mailbox: Platform Psys offset correction. <b>0 - Auto</b> Units 1/4, + Range 0-255. Value of 100 = 100/4 = 25 offset +**/ + UINT8 PsysOffset; + +/** Offset 0x00EA - Acoustic Noise Mitigation feature + Enable or Disable Acoustic Noise Mitigation feature. This has to be enabled to program + slew rate configuration for all VR domains, Pre Wake, Ramp Up and, Ramp Down times.<b>0: + Disabled</b>; 1: Enabled + $EN_DIS +**/ + UINT8 AcousticNoiseMitigation; + +/** Offset 0x00EB - Disable Fast Slew Rate for Deep Package C States for VR IA domain + Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation + feature enabled. <b>0: False</b>; 1: True + $EN_DIS +**/ + UINT8 FastPkgCRampDisableIa; + +/** Offset 0x00EC - Slew Rate configuration for Deep Package C States for VR IA domain + Slew Rate configuration for Deep Package C States for VR IA domain based on Acoustic + Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16 + 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 +**/ + UINT8 SlowSlewRateForIa; + +/** Offset 0x00ED - Slew Rate configuration for Deep Package C States for VR GT domain + Slew Rate configuration for Deep Package C States for VR GT domain based on Acoustic + Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16 + 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 +**/ + UINT8 SlowSlewRateForGt; + +/** Offset 0x00EE - Slew Rate configuration for Deep Package C States for VR SA domain + Slew Rate configuration for Deep Package C States for VR SA domain based on Acoustic + Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16 + 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 +**/ + UINT8 SlowSlewRateForSa; + +/** Offset 0x00EF +**/ + UINT8 UnusedUpdSpace3[1]; + +/** Offset 0x00F0 - Thermal Design Current current limit + PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units. + Range is 0-4095. 1000 = 125A. <b>0: Auto</b>. For all VR Indexes +**/ + UINT16 TdcPowerLimit[5]; + +/** Offset 0x00FA - AcLoadline + PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is + 0-6249. <b>Intel Recommended Defaults vary by domain and SKU. +**/ + UINT16 AcLoadline[5]; + +/** Offset 0x0104 - DcLoadline + PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is + 0-6249.<b>Intel Recommended Defaults vary by domain and SKU.</b> +**/ + UINT16 DcLoadline[5]; + +/** Offset 0x010E - Power State 1 Threshold current + PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A. +**/ + UINT16 Psi1Threshold[5]; + +/** Offset 0x0118 - Power State 2 Threshold current + PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A. +**/ + UINT16 Psi2Threshold[5]; + +/** Offset 0x0122 - Power State 3 Threshold current + PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A. +**/ + UINT16 Psi3Threshold[5]; + +/** Offset 0x012C - Icc Max limit + PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A +**/ + UINT16 IccMax[5]; + +/** Offset 0x0136 - VR Voltage Limit + PCODE MMIO Mailbox: VR Voltage Limit. Range is 0-7999mV. +**/ + UINT16 VrVoltageLimit[5]; + +/** Offset 0x0140 - Disable Fast Slew Rate for Deep Package C States for VR GT domain + Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation + feature enabled. <b>0: False</b>; 1: True + $EN_DIS +**/ + UINT8 FastPkgCRampDisableGt; + +/** Offset 0x0141 - Disable Fast Slew Rate for Deep Package C States for VR SA domain + Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation + feature enabled. <b>0: False</b>; 1: True + $EN_DIS +**/ + UINT8 FastPkgCRampDisableSa; + +/** Offset 0x0142 - Enable VR specific mailbox command + VR specific mailbox commands. <b>00b - no VR specific command sent.</b> 01b - A + VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific + command sent for PS4 exit issue. 11b - Reserved. + $EN_DIS +**/ + UINT8 SendVrMbxCmd; + +/** Offset 0x0143 - Reserved + Reserved +**/ + UINT8 Reserved2; + +/** Offset 0x0144 - Enable or Disable TXT + Enable or Disable TXT; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 TxtEnable; + +/** Offset 0x0145 - Deprecated DO NOT USE Skip Multi-Processor Initialization + @deprecated SkipMpInit has been moved to FspmUpd + $EN_DIS +**/ + UINT8 SkipMpInitDeprecated; + +/** Offset 0x0146 - McIVR RFI Frequency Prefix + PCODE MMIO Mailbox: McIVR RFI Frequency Adjustment Prefix. <b>0: Plus (+)</b>; 1: + Minus (-). +**/ + UINT8 McivrRfiFrequencyPrefix; + +/** Offset 0x0147 - McIVR RFI Frequency Adjustment + PCODE MMIO Mailbox: Adjust the RFI frequency relative to the nominal frequency in + increments of 100KHz. For subtraction, change McivrRfiFrequencyPrefix. <b>0: Auto</b>. +**/ + UINT8 McivrRfiFrequencyAdjust; + +/** Offset 0x0148 - FIVR RFI Frequency + PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. <b>0: + Auto</b>. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock; + 0-1535 (Up to 153.5MHz) for 19MHz clock. +**/ + UINT16 FivrRfiFrequency; + +/** Offset 0x014A - McIVR RFI Spread Spectrum + PCODE MMIO Mailbox: McIVR RFI Spread Spectrum. <b>0: 0%</b>; 1: +/- 0.5%; 2: +/- + 1%; 3: +/- 1.5%; 4: +/- 2%; 5: +/- 3%; 6: +/- 4%; 7: +/- 5%; 8: +/- 6%. +**/ + UINT8 McivrSpreadSpectrum; + +/** Offset 0x014B - FIVR RFI Spread Spectrum + PCODE MMIO Mailbox: FIVR RFI Spread Spectrum, in 0.1% increments. <b>0: 0%</b>; + Range: 0.0% to 10.0% (0-100). +**/ + UINT8 FivrSpreadSpectrum; + +/** Offset 0x014C - Disable Fast Slew Rate for Deep Package C States for VR FIVR domain + Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation + feature enabled. <b>0: False</b>; 1: True + $EN_DIS +**/ + UINT8 FastPkgCRampDisableFivr; + +/** Offset 0x014D - Slew Rate configuration for Deep Package C States for VR FIVR domain + Slew Rate configuration for Deep Package C States for VR FIVR domain based on Acoustic + Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16 + 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 +**/ + UINT8 SlowSlewRateForFivr; + +/** Offset 0x014E +**/ + UINT8 UnusedUpdSpace4[2]; + +/** Offset 0x0150 - CpuBistData + Pointer CPU BIST Data +**/ + UINT32 CpuBistData; + +/** Offset 0x0154 - Activates VR mailbox command for Intersil VR C-state issues. + Intersil VR mailbox command. <b>0 - no mailbox command sent.</b> 1 - VR mailbox + command sent for IA/GT rails only. 2 - VR mailbox command sent for IA/GT/SA rails. +**/ + UINT8 IslVrCmd; + +/** Offset 0x0155 +**/ + UINT8 UnusedUpdSpace5[1]; + +/** Offset 0x0156 - Imon slope1 correction + PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values. + Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes +**/ + UINT16 ImonSlope1[5]; + +/** Offset 0x0160 - CPU VR Power Delivery Design + Used to communicate the power delivery design capability of the board. This value + is an enum of the available power delivery segments that are defined in the Platform + Design Guide. +**/ + UINT32 VrPowerDeliveryDesign; + +/** Offset 0x0164 - Pre Wake Randomization time + PCODE MMIO Mailbox: Acoustic Migitation Range.Defines the maximum pre-wake randomization + time in micro ticks.This can be programmed only if AcousticNoiseMigitation is enabled. + Range 0-255 <b>0</b>. +**/ + UINT8 PreWake; + +/** Offset 0x0165 - Ramp Up Randomization time + PCODE MMIO Mailbox: Acoustic Migitation Range.Defines the maximum Ramp Up randomization + time in micro ticks.This can be programmed only if AcousticNoiseMigitation is enabled.Range + 0-255 <b>0</b>. +**/ + UINT8 RampUp; + +/** Offset 0x0166 - Ramp Down Randomization time + PCODE MMIO Mailbox: Acoustic Migitation Range.Defines the maximum Ramp Down randomization + time in micro ticks.This can be programmed only if AcousticNoiseMigitation is enabled.Range + 0-255 <b>0</b>. +**/ + UINT8 RampDown; + +/** Offset 0x0167 +**/ + UINT8 UnusedUpdSpace6; + +/** Offset 0x0168 - CpuMpPpi + Pointer for CpuMpPpi +**/ + UINT32 CpuMpPpi; + +/** Offset 0x016C - CpuMpHob + Pointer for CpuMpHob. This is optional data buffer for CpuMpPpi usage. +**/ + UINT32 CpuMpHob; + +/** Offset 0x0170 - Enable or Disable processor debug features + Enable or Disable processor debug features; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 DebugInterfaceEnable; + +/** Offset 0x0171 +**/ + UINT8 UnusedUpdSpace7[1]; + +/** Offset 0x0172 - Imon offset 1 correction + PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer. + Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. <b>0: Auto</b> +**/ + UINT16 ImonOffset1[5]; + +/** Offset 0x017C - ReservedCpuPostMemProduction + Reserved for CPU Post-Mem Production + $EN_DIS +**/ + UINT8 ReservedCpuPostMemProduction[8]; + +/** Offset 0x0184 - Enable HD Audio DSP + Enable/disable HD Audio DSP feature. + $EN_DIS +**/ + UINT8 PchHdaDspEnable; + +/** Offset 0x0185 - SPI0 Chip Select Polarity + Sets polarity for each chip Select. Available options: 0:PchSerialIoCsActiveLow, + 1:PchSerialIoCsActiveHigh +**/ + UINT8 SerialIoSpi0CsPolarity[2]; + +/** Offset 0x0187 - SPI1 Chip Select Polarity + Sets polarity for each chip Select. Available options: 0:PchSerialIoCsActiveLow, + 1:PchSerialIoCsActiveHigh +**/ + UINT8 SerialIoSpi1CsPolarity[2]; + +/** Offset 0x0189 - SPI2 Chip Select Polarity + Sets polarity for each chip Select. Available options: 0:PchSerialIoCsActiveLow, + 1:PchSerialIoCsActiveHigh +**/ + UINT8 SerialIoSpi2CsPolarity[2]; + +/** Offset 0x018B - SPI0 Chip Select Enable + 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled +**/ + UINT8 SerialIoSpi0CsEnable[2]; + +/** Offset 0x018D - SPI1 Chip Select Enable + 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled +**/ + UINT8 SerialIoSpi1CsEnable[2]; + +/** Offset 0x018F - SPI2 Chip Select Enable + 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled +**/ + UINT8 SerialIoSpi2CsEnable[2]; + +/** Offset 0x0191 - SPIn Device Mode + Selects SPI operation mode. N represents controller index: SPI0, SPI1, ... Available + modes: 0:SerialIoSpiDisabled, 1:SerialIoSpiPci, 2:SerialIoSpiHidden +**/ + UINT8 SerialIoSpiMode[3]; + +/** Offset 0x0194 - SPIn Default Chip Select Output + Sets Default CS as Output. N represents controller index: SPI0, SPI1, ... Available + options: 0:CS0, 1:CS1 +**/ + UINT8 SerialIoSpiDefaultCsOutput[3]; + +/** Offset 0x0197 - PCH SerialIo I2C Pads Termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,I2C2,I2C3,I2C4,I2C5 + pads termination respectively. One byte for each controller, byte0 for I2C0, byte1 + for I2C1, and so on. +**/ + UINT8 PchSerialIoI2cPadsTermination[6]; + +/** Offset 0x019D - I2Cn Device Mode + Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available + modes: 0:SerialIoI2cDisabled, 1:SerialIoI2cPci, 2:SerialIoI2cHidden +**/ + UINT8 SerialIoI2cMode[6]; + +/** Offset 0x01A3 - UARTn Device Mode + Selects Uart operation mode. N represents controller index: Uart0, Uart1, ... Available + modes: 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 SerialIoUartMode[3]; + +/** Offset 0x01A6 +**/ + UINT8 UnusedUpdSpace8[2]; + +/** Offset 0x01A8 - Default BaudRate for each Serial IO UART + Set default BaudRate Supported from 0 - default to 6000000 +**/ + UINT32 SerialIoUartBaudRate[3]; + +/** Offset 0x01B4 - Default ParityType for each Serial IO UART + Set default Parity. 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 SerialIoUartParity[3]; + +/** Offset 0x01B7 - Default DataBits for each Serial IO UART + Set default word length. 0: Default, 5,6,7,8 +**/ + UINT8 SerialIoUartDataBits[3]; + +/** Offset 0x01BA - Default StopBits for each Serial IO UART + Set default stop bits. 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: + TwoStopBits +**/ + UINT8 SerialIoUartStopBits[3]; + +/** Offset 0x01BD - Power Gating mode for each Serial IO UART that works in COM mode + Set Power Gating. 0: Disabled, 1: Enabled, 2: Auto +**/ + UINT8 SerialIoUartPowerGating[3]; + +/** Offset 0x01C0 - Enable Dma for each Serial IO UART that supports it + Set DMA/PIO mode. 0: Disabled, 1: Enabled +**/ + UINT8 SerialIoUartDmaEnable[3]; + +/** Offset 0x01C3 - Enables UART hardware flow control, CTS and RTS lines + Enables UART hardware flow control, CTS and RTS lines. +**/ + UINT8 SerialIoUartAutoFlow[3]; + +/** Offset 0x01C6 +**/ + UINT8 UnusedUpdSpace9[2]; + +/** Offset 0x01C8 - SerialIoUartRxPinMux + Select SerialIo Uart Rx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RX* for + possible values. +**/ + UINT32 SerialIoUartRxPinMux[3]; + +/** Offset 0x01D4 - SerialIoUartTxPinMux + Select SerialIo Uart Tx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_TX* for + possible values. +**/ + UINT32 SerialIoUartTxPinMux[3]; + +/** Offset 0x01E0 - SerialIoUartRtsPinMux + Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 SerialIoUartRtsPinMux[3]; + +/** Offset 0x01EC - SerialIoUartCtsPinMux + Select SerialIo Uart Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 SerialIoUartCtsPinMux[3]; + +/** Offset 0x01F8 - UART Number For Debug Purpose + UART number for debug purpose. 0:UART0, 1: UART1, 2:UART2. Note: If UART0 is selected + as CNVi BT Core interface, it cannot be used for debug purpose. + 0:UART0, 1:UART1, 2:UART2 +**/ + UINT8 SerialIoDebugUartNumber; + +/** Offset 0x01F9 - Serial IO UART DBG2 table + Enable or disable Serial Io UART DBG2 table, default is Disable; <b>0: Disable;</b> + 1: Enable. +**/ + UINT8 SerialIoUartDbg2[3]; + +/** Offset 0x01FC - Enable eMMC Controller + Enable/disable eMMC Controller. + $EN_DIS +**/ + UINT8 ScsEmmcEnabled; + +/** Offset 0x01FD - Enable eMMC HS400 Mode + Enable eMMC HS400 Mode. + $EN_DIS +**/ + UINT8 ScsEmmcHs400Enabled; + +/** Offset 0x01FE - Enable SdCard Controller + Enable/disable SD Card Controller. + $EN_DIS +**/ + UINT8 ScsSdCardEnabled; + +/** Offset 0x01FF - Show SPI controller + Enable/disable to show SPI controller. + $EN_DIS +**/ + UINT8 ShowSpiController; + +/** Offset 0x0200 - Enable SATA SALP Support + Enable/disable SATA Aggressive Link Power Management. + $EN_DIS +**/ + UINT8 SataSalpSupport; + +/** Offset 0x0201 - Enable SATA ports + Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1, + and so on. +**/ + UINT8 SataPortsEnable[8]; + +/** Offset 0x0209 - Enable SATA DEVSLP Feature + Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each + port, byte0 for port0, byte1 for port1, and so on. +**/ + UINT8 SataPortsDevSlp[8]; + +/** Offset 0x0211 - Enable USB2 ports + Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. +**/ + UINT8 PortUsb20Enable[16]; + +/** Offset 0x0221 - Enable USB3 ports + Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. +**/ + UINT8 PortUsb30Enable[10]; + +/** Offset 0x022B - Enable xDCI controller + Enable/disable to xDCI controller. + $EN_DIS +**/ + UINT8 XdciEnable; + +/** Offset 0x022C - Address of PCH_DEVICE_INTERRUPT_CONFIG table. + The address of the table of PCH_DEVICE_INTERRUPT_CONFIG. +**/ + UINT32 DevIntConfigPtr; + +/** Offset 0x0230 - Number of DevIntConfig Entry + Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr + must not be NULL. +**/ + UINT8 NumOfDevIntConfig; + +/** Offset 0x0231 - PIRQx to IRQx Map Config + PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for + PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy + 8259 PCI mode. +**/ + UINT8 PxRcConfig[8]; + +/** Offset 0x0239 - Select GPIO IRQ Route + GPIO IRQ Select. The valid value is 14 or 15. +**/ + UINT8 GpioIrqRoute; + +/** Offset 0x023A - Select SciIrqSelect + SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only. +**/ + UINT8 SciIrqSelect; + +/** Offset 0x023B - Select TcoIrqSelect + TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23. +**/ + UINT8 TcoIrqSelect; + +/** Offset 0x023C - Enable/Disable Tco IRQ + Enable/disable TCO IRQ + $EN_DIS +**/ + UINT8 TcoIrqEnable; + +/** Offset 0x023D - PCH HDA Verb Table Entry Number + Number of Entries in Verb Table. +**/ + UINT8 PchHdaVerbTableEntryNum; + +/** Offset 0x023E +**/ + UINT8 UnusedUpdSpace10[2]; + +/** Offset 0x0240 - PCH HDA Verb Table Pointer + Pointer to Array of pointers to Verb Table. +**/ + UINT32 PchHdaVerbTablePtr; + +/** Offset 0x0244 - PCH HDA Codec Sx Wake Capability + Capability to detect wake initiated by a codec in Sx +**/ + UINT8 PchHdaCodecSxWakeCapability; + +/** Offset 0x0245 - Enable SATA + Enable/disable SATA controller. + $EN_DIS +**/ + UINT8 SataEnable; + +/** Offset 0x0246 - SATA Mode + Select SATA controller working mode. + 0:AHCI, 1:RAID +**/ + UINT8 SataMode; + +/** Offset 0x0247 - USB Per Port HS Preemphasis Bias + USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, + 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port. +**/ + UINT8 Usb2AfePetxiset[16]; + +/** Offset 0x0257 - USB Per Port HS Transmitter Bias + USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, + 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port. +**/ + UINT8 Usb2AfeTxiset[16]; + +/** Offset 0x0267 - USB Per Port HS Transmitter Emphasis + USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON, + 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port. +**/ + UINT8 Usb2AfePredeemp[16]; + +/** Offset 0x0277 - USB Per Port Half Bit Pre-emphasis + USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis. + One byte for each port. +**/ + UINT8 Usb2AfePehalfbit[16]; + +/** Offset 0x0287 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment + Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value + in arrary can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxDeEmphEnable[10]; + +/** Offset 0x0291 - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting + USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16], + <b>Default = 29h</b> (approximately -3.5dB De-Emphasis). One byte for each port. +**/ + UINT8 Usb3HsioTxDeEmph[10]; + +/** Offset 0x029B - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment + Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value + in arrary can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxDownscaleAmpEnable[10]; + +/** Offset 0x02A5 - USB 3.0 TX Output Downscale Amplitude Adjustment + USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], <b>Default + = 00h</b>. One byte for each port. +**/ + UINT8 Usb3HsioTxDownscaleAmp[10]; + +/** Offset 0x02AF - Enable LAN + Enable/disable LAN controller. + $EN_DIS +**/ + UINT8 PchLanEnable; + +/** Offset 0x02B0 - Enable HD Audio Link + Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkHda; + +/** Offset 0x02B1 - Enable HD Audio DMIC0 Link + Enable/disable HD Audio DMIC0 link. Muxed with SNDW4. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkDmic0; + +/** Offset 0x02B2 - Enable HD Audio DMIC1 Link + Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkDmic1; + +/** Offset 0x02B3 - Enable HD Audio SSP0 Link + Enable/disable HD Audio SSP0/I2S link. Muxed with HDA. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSsp0; + +/** Offset 0x02B4 - Enable HD Audio SSP1 Link + Enable/disable HD Audio SSP1/I2S link. Muxed with HDA/SNDW2. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSsp1; + +/** Offset 0x02B5 - Enable HD Audio SSP2 Link + Enable/disable HD Audio SSP2/I2S link. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSsp2; + +/** Offset 0x02B6 - Enable HD Audio SoundWire#1 Link + Enable/disable HD Audio SNDW1 link. Muxed with HDA. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSndw1; + +/** Offset 0x02B7 - Enable HD Audio SoundWire#2 Link + Enable/disable HD Audio SNDW2 link. Muxed with SSP1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSndw2; + +/** Offset 0x02B8 - Enable HD Audio SoundWire#3 Link + Enable/disable HD Audio SNDW3 link. Muxed with DMIC1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSndw3; + +/** Offset 0x02B9 - Enable HD Audio SoundWire#4 Link + Enable/disable HD Audio SNDW4 link. Muxed with DMIC0. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSndw4; + +/** Offset 0x02BA - Soundwire Clock Buffer GPIO RCOMP Setting + 0: non-ACT - 50 Ohm driver impedance, 1: ACT - 8 Ohm driver impedance. + $EN_DIS +**/ + UINT8 PchHdaSndwBufferRcomp; + +/** Offset 0x02BB +**/ + UINT8 UnusedUpdSpace11; + +/** Offset 0x02BC - PTM for PCIE RP Mask + Enable/disable Precision Time Measurement for PCIE Root Ports. 0: disable, 1: enable. + One bit for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpPtmMask; + +/** Offset 0x02C0 - DPC for PCIE RP Mask + Enable/disable Downstream Port Containment for PCIE Root Ports. 0: disable, 1: enable. + One bit for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpDpcMask; + +/** Offset 0x02C4 - DPC Extensions PCIE RP Mask + Enable/disable DPC Extensions for PCIE Root Ports. 0: disable, 1: enable. One bit + for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpDpcExtensionsMask; + +/** Offset 0x02C8 - USB PDO Programming + Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming + during later phase. 1: enable, 0: disable + $EN_DIS +**/ + UINT8 UsbPdoProgramming; + +/** Offset 0x02C9 +**/ + UINT8 UnusedUpdSpace12[3]; + +/** Offset 0x02CC - Power button debounce configuration + Debounce time for PWRBTN in microseconds. For values not supported by HW, they will + be rounded down to closest supported on. 0: disable, 250-1024000us: supported range +**/ + UINT32 PmcPowerButtonDebounce; + +/** Offset 0x02D0 - PCH eSPI Master and Slave BME enabled + PCH eSPI Master and Slave BME enabled + $EN_DIS +**/ + UINT8 PchEspiBmeMasterSlaveEnabled; + +/** Offset 0x02D1 - PCH SATA use RST Legacy OROM + Use PCH SATA RST Legacy OROM when CSM is Enabled + $EN_DIS +**/ + UINT8 SataRstLegacyOrom; + +/** Offset 0x02D2 +**/ + UINT8 UnusedUpdSpace13[2]; + +/** Offset 0x02D4 - Trace Hub Memory Base + If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate + trace hub memory as reserved and uncacheable, set the base to ensure Trace Hub + memory is configured properly. +**/ + UINT32 TraceHubMemBase; + +/** Offset 0x02D8 - PMC Debug Message Enable + When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW + will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix + $EN_DIS +**/ + UINT8 PmcDbgMsgEn; + +/** Offset 0x02D9 +**/ + UINT8 UnusedUpdSpace14[3]; + +/** Offset 0x02DC - Pointer of ChipsetInit Binary + ChipsetInit Binary Pointer. +**/ + UINT32 ChipsetInitBinPtr; + +/** Offset 0x02E0 - Length of ChipsetInit Binary + ChipsetInit Binary Length. +**/ + UINT32 ChipsetInitBinLen; + +/** Offset 0x02E4 - Enable Ufs Controller + Enable/disable Ufs 2.0 Controller. + $EN_DIS +**/ + UINT8 ScsUfsEnabled; + +/** Offset 0x02E5 - CNVi Configuration + This option allows for automatic detection of Connectivity Solution. [Auto Detection] + assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi. + 0:Disable, 1:Auto +**/ + UINT8 CnviMode; + +/** Offset 0x02E6 - CNVi BT Core + Enable/Disable CNVi BT Core, Default is ENABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviBtCore; + +/** Offset 0x02E7 - CNVi BT Audio Offload + Enable/Disable BT Audio Offload, Default is DISABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviBtAudioOffload; + +/** Offset 0x02E8 - SdCard power enable polarity + Choose SD_PWREN# polarity + 0: Active low, 1: Active high +**/ + UINT8 SdCardPowerEnableActiveHigh; + +/** Offset 0x02E9 - PCH USB2 PHY Power Gating enable + 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY + Sus Well PG + $EN_DIS +**/ + UINT8 PchUsb2PhySusPgEnable; + +/** Offset 0x02EA - PCH USB OverCurrent mapping enable + 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin + mapping allow for NOA usage of OC pins + $EN_DIS +**/ + UINT8 PchUsbOverCurrentEnable; + +/** Offset 0x02EB - Espi Lgmr Memory Range decode + This option enables or disables espi lgmr + $EN_DIS +**/ + UINT8 PchEspiLgmrEnable; + +/** Offset 0x02EC - PCHHOT# pin + Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchHotEnable; + +/** Offset 0x02ED - SATA LED + SATA LED indicating SATA controller activity. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 SataLedEnable; + +/** Offset 0x02EE - VRAlert# Pin + When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling + to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchPmVrAlert; + +/** Offset 0x02EF - SLP_S0 VM Dynamic Control + SLP_S0 Voltage Margining Runtime Control Policy. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchPmSlpS0VmRuntimeControl; + +/** Offset 0x02F0 - SLP_S0 VM 0.70V Support + SLP_S0 Voltage Margining 0.70V Support Policy. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchPmSlpS0Vm070VSupport; + +/** Offset 0x02F1 - SLP_S0 VM 0.75V Support + SLP_S0 Voltage Margining 0.75V Support Policy. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchPmSlpS0Vm075VSupport; + +/** Offset 0x02F2 - PCH PCIe root port connection type + 0: built-in device, 1:slot +**/ + UINT8 PcieRpSlotImplemented[24]; + +/** Offset 0x030A - Usage type for ClkSrc + 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use + (free running), 0xFF: not used +**/ + UINT8 PcieClkSrcUsage[16]; + +/** Offset 0x031A - ClkReq-to-ClkSrc mapping + Number of ClkReq signal assigned to ClkSrc +**/ + UINT8 PcieClkSrcClkReq[16]; + +/** Offset 0x032A - PCIE RP Access Control Services Extended Capability + Enable/Disable PCIE RP Access Control Services Extended Capability +**/ + UINT8 PcieRpAcsEnabled[24]; + +/** Offset 0x0342 - PCIE RP Clock Power Management + Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal + can still be controlled by L1 PM substates mechanism +**/ + UINT8 PcieRpEnableCpm[24]; + +/** Offset 0x035A - PCIE RP Detect Timeout Ms + The number of milliseconds within 0~65535 in reference code will wait for link to + exit Detect state for enabled ports before assuming there is no device and potentially + disabling the port. +**/ + UINT16 PcieRpDetectTimeoutMs[24]; + +/** Offset 0x038A - ModPHY SUS Power Domain Dynamic Gating + Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on + PCH-H. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PmcModPhySusPgEnable; + +/** Offset 0x038B - SlpS0WithGbeSupport + Enable/Disable SLP_S0 with GBE Support. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 SlpS0WithGbeSupport; + +/** Offset 0x038C - Enable Power Optimizer + Enable DMI Power Optimizer on PCH side. + $EN_DIS +**/ + UINT8 PchPwrOptEnable; + +/** Offset 0x038D - PCH Flash Protection Ranges Write Enble + Write or erase is blocked by hardware. +**/ + UINT8 PchWriteProtectionEnable[5]; + +/** Offset 0x0392 - PCH Flash Protection Ranges Read Enble + Read is blocked by hardware. +**/ + UINT8 PchReadProtectionEnable[5]; + +/** Offset 0x0397 +**/ + UINT8 UnusedUpdSpace15[1]; + +/** Offset 0x0398 - PCH Protect Range Limit + Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for + limit comparison. +**/ + UINT16 PchProtectedRangeLimit[5]; + +/** Offset 0x03A2 - PCH Protect Range Base + Left shifted address by 12 bits with address bits 11:0 are assumed to be 0. +**/ + UINT16 PchProtectedRangeBase[5]; + +/** Offset 0x03AC - Enable Pme + Enable Azalia wake-on-ring. + $EN_DIS +**/ + UINT8 PchHdaPme; + +/** Offset 0x03AD - VC Type + Virtual Channel Type Select: 0: VC0, 1: VC1. + 0: VC0, 1: VC1 +**/ + UINT8 PchHdaVcType; + +/** Offset 0x03AE - HD Audio Link Frequency + HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz. + 0: 6MHz, 1: 12MHz, 2: 24MHz +**/ + UINT8 PchHdaLinkFrequency; + +/** Offset 0x03AF - iDisp-Link Frequency + iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz. + 4: 96MHz, 3: 48MHz +**/ + UINT8 PchHdaIDispLinkFrequency; + +/** Offset 0x03B0 - iDisp-Link T-mode + iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 1: 1T. + 0: 2T, 1: 1T +**/ + UINT8 PchHdaIDispLinkTmode; + +/** Offset 0x03B1 - Universal Audio Architecture compliance for DSP enabled system + 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox + driver or SST driver supported). + $EN_DIS +**/ + UINT8 PchHdaDspUaaCompliance; + +/** Offset 0x03B2 - iDisplay Audio Codec disconnection + 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. + $EN_DIS +**/ + UINT8 PchHdaIDispCodecDisconnect; + +/** Offset 0x03B3 - USB LFPS Filter selection + For each byte bits 2:0 are for p, bits 4:6 are for n. 0h:1.6ns, 1h:2.4ns, 2h:3.2ns, + 3h:4.0ns, 4h:4.8ns, 5h:5.6ns, 6h:6.4ns. +**/ + UINT8 PchUsbHsioFilterSel[10]; + +/** Offset 0x03BD - Enable PCH Io Apic Entry 24-119 + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIoApicEntry24_119; + +/** Offset 0x03BE - PCH Io Apic ID + This member determines IOAPIC ID. Default is 0x02. +**/ + UINT8 PchIoApicId; + +/** Offset 0x03BF - Enable PCH ISH SPI GPIO pins assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshSpiGpioAssign; + +/** Offset 0x03C0 - Enable PCH ISH UART0 GPIO pins assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshUart0GpioAssign; + +/** Offset 0x03C1 - Enable PCH ISH UART1 GPIO pins assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshUart1GpioAssign; + +/** Offset 0x03C2 - Enable PCH ISH I2C0 GPIO pins assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshI2c0GpioAssign; + +/** Offset 0x03C3 - Enable PCH ISH I2C1 GPIO pins assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshI2c1GpioAssign; + +/** Offset 0x03C4 - Enable PCH ISH I2C2 GPIO pins assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshI2c2GpioAssign; + +/** Offset 0x03C5 - Enable PCH ISH GP_0 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp0GpioAssign; + +/** Offset 0x03C6 - Enable PCH ISH GP_1 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp1GpioAssign; + +/** Offset 0x03C7 - Enable PCH ISH GP_2 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp2GpioAssign; + +/** Offset 0x03C8 - Enable PCH ISH GP_3 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp3GpioAssign; + +/** Offset 0x03C9 - Enable PCH ISH GP_4 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp4GpioAssign; + +/** Offset 0x03CA - Enable PCH ISH GP_5 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp5GpioAssign; + +/** Offset 0x03CB - Enable PCH ISH GP_6 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp6GpioAssign; + +/** Offset 0x03CC - Enable PCH ISH GP_7 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp7GpioAssign; + +/** Offset 0x03CD - PCH ISH PDT Unlock Msg + 0: False; 1: True. + $EN_DIS +**/ + UINT8 PchIshPdtUnlock; + +/** Offset 0x03CE - Enable PCH Lan LTR capabilty of PCH internal LAN + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchLanLtrEnable; + +/** Offset 0x03CF - Enable LOCKDOWN BIOS LOCK + Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region + protection. + $EN_DIS +**/ + UINT8 PchLockDownBiosLock; + +/** Offset 0x03D0 - PCH Compatibility Revision ID + This member describes whether or not the CRID feature of PCH should be enabled. + $EN_DIS +**/ + UINT8 PchCrid; + +/** Offset 0x03D1 - RTC CMOS MEMORY LOCK + Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper + and and lower 128-byte bank of RTC RAM. + $EN_DIS +**/ + UINT8 PchLockDownRtcMemoryLock; + +/** Offset 0x03D2 - Enable PCIE RP HotPlug + Indicate whether the root port is hot plug available. +**/ + UINT8 PcieRpHotPlug[24]; + +/** Offset 0x03EA - Enable PCIE RP Pm Sci + Indicate whether the root port power manager SCI is enabled. +**/ + UINT8 PcieRpPmSci[24]; + +/** Offset 0x0402 - Enable PCIE RP Ext Sync + Indicate whether the extended synch is enabled. +**/ + UINT8 PcieRpExtSync[24]; + +/** Offset 0x041A - Enable PCIE RP Transmitter Half Swing + Indicate whether the Transmitter Half Swing is enabled. +**/ + UINT8 PcieRpTransmitterHalfSwing[24]; + +/** Offset 0x0432 - Enable PCIE RP Clk Req Detect + Probe CLKREQ# signal before enabling CLKREQ# based power management. +**/ + UINT8 PcieRpClkReqDetect[24]; + +/** Offset 0x044A - PCIE RP Advanced Error Report + Indicate whether the Advanced Error Reporting is enabled. +**/ + UINT8 PcieRpAdvancedErrorReporting[24]; + +/** Offset 0x0462 - PCIE RP Unsupported Request Report + Indicate whether the Unsupported Request Report is enabled. +**/ + UINT8 PcieRpUnsupportedRequestReport[24]; + +/** Offset 0x047A - PCIE RP Fatal Error Report + Indicate whether the Fatal Error Report is enabled. +**/ + UINT8 PcieRpFatalErrorReport[24]; + +/** Offset 0x0492 - PCIE RP No Fatal Error Report + Indicate whether the No Fatal Error Report is enabled. +**/ + UINT8 PcieRpNoFatalErrorReport[24]; + +/** Offset 0x04AA - PCIE RP Correctable Error Report + Indicate whether the Correctable Error Report is enabled. +**/ + UINT8 PcieRpCorrectableErrorReport[24]; + +/** Offset 0x04C2 - PCIE RP System Error On Fatal Error + Indicate whether the System Error on Fatal Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnFatalError[24]; + +/** Offset 0x04DA - PCIE RP System Error On Non Fatal Error + Indicate whether the System Error on Non Fatal Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnNonFatalError[24]; + +/** Offset 0x04F2 - PCIE RP System Error On Correctable Error + Indicate whether the System Error on Correctable Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnCorrectableError[24]; + +/** Offset 0x050A - PCIE RP Max Payload + Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD. +**/ + UINT8 PcieRpMaxPayload[24]; + +/** Offset 0x0522 - PCH USB3 RX HSIO Tuning parameters + Bits 7:3 are for Signed Magnatude number added to the CTLE code, Bits 2:0 are for + controlling the input offset +**/ + UINT8 PchUsbHsioRxTuningParameters[10]; + +/** Offset 0x052C - PCH USB3 HSIO Rx Tuning Enable + Mask for enabling tuning of HSIO Rx signals of USB3 ports. Bits: 0 - HsioCtrlAdaptOffsetCfgEnable, + 1 - HsioFilterSelNEnable, 2 - HsioFilterSelPEnable, 3 - HsioOlfpsCfgPullUpDwnResEnable +**/ + UINT8 PchUsbHsioRxTuningEnable[10]; + +/** Offset 0x0536 - PCIE RP Pcie Speed + Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see: + PCH_PCIE_SPEED). +**/ + UINT8 PcieRpPcieSpeed[24]; + +/** Offset 0x054E - PCIE RP Gen3 Equalization Phase Method + PCIe Gen3 Eq Ph3 Method (see PCH_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization; + 1: hardware equalization; 4: Fixed Coeficients. +**/ + UINT8 PcieRpGen3EqPh3Method[24]; + +/** Offset 0x0566 - PCIE RP Physical Slot Number + Indicates the slot number for the root port. Default is the value as root port index. +**/ + UINT8 PcieRpPhysicalSlotNumber[24]; + +/** Offset 0x057E - PCIE RP Completion Timeout + The root port completion timeout(see: PCH_PCIE_COMPLETION_TIMEOUT). Default is PchPcieCompletionTO_Default. +**/ + UINT8 PcieRpCompletionTimeout[24]; + +/** Offset 0x0596 - PCIE RP Aspm + The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is + PchPcieAspmAutoConfig. +**/ + UINT8 PcieRpAspm[24]; + +/** Offset 0x05AE - PCIE RP L1 Substates + The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL). + Default is PchPcieL1SubstatesL1_1_2. +**/ + UINT8 PcieRpL1Substates[24]; + +/** Offset 0x05C6 - PCIE RP Ltr Enable + Latency Tolerance Reporting Mechanism. +**/ + UINT8 PcieRpLtrEnable[24]; + +/** Offset 0x05DE - PCIE RP Ltr Config Lock + 0: Disable; 1: Enable. +**/ + UINT8 PcieRpLtrConfigLock[24]; + +/** Offset 0x05F6 - PCIE Eq Ph3 Lane Param Cm + PCH_PCIE_EQ_LANE_PARAM. Coefficient C-1. +**/ + UINT8 PcieEqPh3LaneParamCm[24]; + +/** Offset 0x060E - PCIE Eq Ph3 Lane Param Cp + PCH_PCIE_EQ_LANE_PARAM. Coefficient C+1. +**/ + UINT8 PcieEqPh3LaneParamCp[24]; + +/** Offset 0x0626 - PCIE Sw Eq CoeffList Cm + PCH_PCIE_EQ_PARAM. Coefficient C-1. +**/ + UINT8 PcieSwEqCoeffListCm[5]; + +/** Offset 0x062B - PCIE Sw Eq CoeffList Cp + PCH_PCIE_EQ_PARAM. Coefficient C+1. +**/ + UINT8 PcieSwEqCoeffListCp[5]; + +/** Offset 0x0630 - PCIE Disable RootPort Clock Gating + Describes whether the PCI Express Clock Gating for each root port is enabled by + platform modules. 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PcieDisableRootPortClockGating; + +/** Offset 0x0631 - PCIE Enable Peer Memory Write + This member describes whether Peer Memory Writes are enabled on the platform. + $EN_DIS +**/ + UINT8 PcieEnablePeerMemoryWrite; + +/** Offset 0x0632 - PCIE Compliance Test Mode + Compliance Test Mode shall be enabled when using Compliance Load Board. + $EN_DIS +**/ + UINT8 PcieComplianceTestMode; + +/** Offset 0x0633 - PCIE Rp Function Swap + Allows BIOS to use root port function number swapping when root port of function + 0 is disabled. + $EN_DIS +**/ + UINT8 PcieRpFunctionSwap; + +/** Offset 0x0634 - Teton Glacier Cycle Router + Specify to which cycle router Teton Glacier is connected, it is valid only when + Teton Glacier support is enabled. Default is 0 for CNP-H system and 1 for CNP-LP system +**/ + UINT8 TetonGlacierCR; + +/** Offset 0x0635 - PCH Pm PME_B0_S5_DIS + When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1. + $EN_DIS +**/ + UINT8 PchPmPmeB0S5Dis; + +/** Offset 0x0636 - PCIE IMR + Enables Isolated Memory Region for PCIe. + $EN_DIS +**/ + UINT8 PcieRpImrEnabled; + +/** Offset 0x0637 - PCIE IMR port number + Selects PCIE root port number for IMR feature. +**/ + UINT8 PcieRpImrSelection; + +/** Offset 0x0638 - Teton Glacier Detection and Configuration Mode + Enables support for Teton Glacier hybrid storage device. 0: Disabled; 1: Static + Configuration 2: Dynamic Configuration. Default is 0: Disabled + 0: Disabled, 1: Static Configuration, 2: Dynamic Configuration +**/ + UINT8 TetonGlacierMode; + +/** Offset 0x0639 - PCH Pm Wol Enable Override + Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register. + $EN_DIS +**/ + UINT8 PchPmWolEnableOverride; + +/** Offset 0x063A - PCH Pm Pcie Wake From DeepSx + Determine if enable PCIe to wake from deep Sx. + $EN_DIS +**/ + UINT8 PchPmPcieWakeFromDeepSx; + +/** Offset 0x063B - PCH Pm WoW lan Enable + Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register. + $EN_DIS +**/ + UINT8 PchPmWoWlanEnable; + +/** Offset 0x063C - PCH Pm WoW lan DeepSx Enable + Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the + PWRM_CFG3 register. + $EN_DIS +**/ + UINT8 PchPmWoWlanDeepSxEnable; + +/** Offset 0x063D - PCH Pm Lan Wake From DeepSx + Determine if enable LAN to wake from deep Sx. + $EN_DIS +**/ + UINT8 PchPmLanWakeFromDeepSx; + +/** Offset 0x063E - PCH Pm Deep Sx Pol + Deep Sx Policy. + $EN_DIS +**/ + UINT8 PchPmDeepSxPol; + +/** Offset 0x063F - PCH Pm Slp S3 Min Assert + SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms. +**/ + UINT8 PchPmSlpS3MinAssert; + +/** Offset 0x0640 - PCH Pm Slp S4 Min Assert + SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s. +**/ + UINT8 PchPmSlpS4MinAssert; + +/** Offset 0x0641 - PCH Pm Slp Sus Min Assert + SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s. +**/ + UINT8 PchPmSlpSusMinAssert; + +/** Offset 0x0642 - PCH Pm Slp A Min Assert + SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s. +**/ + UINT8 PchPmSlpAMinAssert; + +/** Offset 0x0643 - SLP_S0# Override + Select 'Auto', it will be auto-configured according to probe type. Select 'Enabled' + will disable SLP_S0# assertion whereas 'Disabled' will enable SLP_S0# assertion + when debug is enabled. \n + Note: This BIOS option should keep 'Auto', other options are intended for advanced + configuration only. + 0:Disabled, 1:Enabled, 2:Auto +**/ + UINT8 SlpS0Override; + +/** Offset 0x0644 - S0ix Override Settings + Select 'Auto', it will be auto-configured according to probe type. 'No Change' will + keep PMC default settings. Or select the desired debug probe type for S0ix Override + settings.\n + Reminder: DCI OOB (aka BSSB) uses CCA probe.\n + Note: This BIOS option should keep 'Auto', other options are intended for advanced + configuration only. + 0:No Change, 1:DCI OOB, 2:USB2 DbC, 3:Auto +**/ + UINT8 SlpS0DisQForDebug; + +/** Offset 0x0645 - USB Overcurrent Override for DbC + This option overrides USB Over Current enablement state that USB OC will be disabled + after enabling this option. Enable when DbC is used to avoid signaling conflicts. + $EN_DIS +**/ + UINT8 PchEnableDbcObs; + +/** Offset 0x0646 - PCH Legacy IO Low Latency Enable + Set to enable low latency of legacy IO. <b>0: Disable</b>, 1: Enable + $EN_DIS +**/ + UINT8 PchLegacyIoLowLatency; + +/** Offset 0x0647 - PCH Pm Lpc Clock Run + This member describes whether or not the LPC ClockRun feature of PCH should be enabled. + Default value is Disabled + $EN_DIS +**/ + UINT8 PchPmLpcClockRun; + +/** Offset 0x0648 - PCH Pm Slp Strch Sus Up + Enable SLP_X Stretching After SUS Well Power Up. + $EN_DIS +**/ + UINT8 PchPmSlpStrchSusUp; + +/** Offset 0x0649 - PCH Pm Slp Lan Low Dc + Enable/Disable SLP_LAN# Low on DC Power. + $EN_DIS +**/ + UINT8 PchPmSlpLanLowDc; + +/** Offset 0x064A - PCH Pm Pwr Btn Override Period + PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s. +**/ + UINT8 PchPmPwrBtnOverridePeriod; + +/** Offset 0x064B - PCH Pm Disable Dsx Ac Present Pulldown + When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit. + $EN_DIS +**/ + UINT8 PchPmDisableDsxAcPresentPulldown; + +/** Offset 0x064C - PCH Pm Disable Native Power Button + Power button native mode disable. + $EN_DIS +**/ + UINT8 PchPmDisableNativePowerButton; + +/** Offset 0x064D - PCH Pm Slp S0 Enable + Indicates whether SLP_S0# is to be asserted when PCH reaches idle state. + $EN_DIS +**/ + UINT8 PchPmSlpS0Enable; + +/** Offset 0x064E - PCH Pm ME_WAKE_STS + Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register. + $EN_DIS +**/ + UINT8 PchPmMeWakeSts; + +/** Offset 0x064F - PCH Pm WOL_OVR_WK_STS + Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register. + $EN_DIS +**/ + UINT8 PchPmWolOvrWkSts; + +/** Offset 0x0650 - PCH Pm Reset Power Cycle Duration + Could be customized in the unit of second. Please refer to EDS for all support settings. + 0 is default, 1 is 1 second, 2 is 2 seconds, ... +**/ + UINT8 PchPmPwrCycDur; + +/** Offset 0x0651 - PCH Pm Pcie Pll Ssc + Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No + BIOS override. +**/ + UINT8 PchPmPciePllSsc; + +/** Offset 0x0652 - PCH Sata Pwr Opt Enable + SATA Power Optimizer on PCH side. + $EN_DIS +**/ + UINT8 SataPwrOptEnable; + +/** Offset 0x0653 - PCH Sata eSATA Speed Limit + When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed. + $EN_DIS +**/ + UINT8 EsataSpeedLimit; + +/** Offset 0x0654 - PCH Sata Speed Limit + Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault. +**/ + UINT8 SataSpeedLimit; + +/** Offset 0x0655 - Enable SATA Port HotPlug + Enable SATA Port HotPlug. +**/ + UINT8 SataPortsHotPlug[8]; + +/** Offset 0x065D - Enable SATA Port Interlock Sw + Enable SATA Port Interlock Sw. +**/ + UINT8 SataPortsInterlockSw[8]; + +/** Offset 0x0665 - Enable SATA Port External + Enable SATA Port External. +**/ + UINT8 SataPortsExternal[8]; + +/** Offset 0x066D - Enable SATA Port SpinUp + Enable the COMRESET initialization Sequence to the device. +**/ + UINT8 SataPortsSpinUp[8]; + +/** Offset 0x0675 - Enable SATA Port Solid State Drive + 0: HDD; 1: SSD. +**/ + UINT8 SataPortsSolidStateDrive[8]; + +/** Offset 0x067D - Enable SATA Port Enable Dito Config + Enable DEVSLP Idle Timeout settings (DmVal, DitoVal). +**/ + UINT8 SataPortsEnableDitoConfig[8]; + +/** Offset 0x0685 - Enable SATA Port DmVal + DITO multiplier. Default is 15. +**/ + UINT8 SataPortsDmVal[8]; + +/** Offset 0x068D +**/ + UINT8 UnusedUpdSpace16[1]; + +/** Offset 0x068E - Enable SATA Port DmVal + DEVSLP Idle Timeout (DITO), Default is 625. +**/ + UINT16 SataPortsDitoVal[8]; + +/** Offset 0x069E - Enable SATA Port ZpOdd + Support zero power ODD. +**/ + UINT8 SataPortsZpOdd[8]; + +/** Offset 0x06A6 - PCH Sata Rst Raid Device Id + Enable RAID Alternate ID. + 0:Client, 1:Alternate, 2:Server +**/ + UINT8 SataRstRaidDeviceId; + +/** Offset 0x06A7 - PCH Sata Rst Raid0 + RAID0. + $EN_DIS +**/ + UINT8 SataRstRaid0; + +/** Offset 0x06A8 - PCH Sata Rst Raid1 + RAID1. + $EN_DIS +**/ + UINT8 SataRstRaid1; + +/** Offset 0x06A9 - PCH Sata Rst Raid10 + RAID10. + $EN_DIS +**/ + UINT8 SataRstRaid10; + +/** Offset 0x06AA - PCH Sata Rst Raid5 + RAID5. + $EN_DIS +**/ + UINT8 SataRstRaid5; + +/** Offset 0x06AB - PCH Sata Rst Irrt + Intel Rapid Recovery Technology. + $EN_DIS +**/ + UINT8 SataRstIrrt; + +/** Offset 0x06AC - PCH Sata Rst Orom Ui Banner + OROM UI and BANNER. + $EN_DIS +**/ + UINT8 SataRstOromUiBanner; + +/** Offset 0x06AD - PCH Sata Rst Orom Ui Delay + 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY). +**/ + UINT8 SataRstOromUiDelay; + +/** Offset 0x06AE - PCH Sata Rst Hdd Unlock + Indicates that the HDD password unlock in the OS is enabled. + $EN_DIS +**/ + UINT8 SataRstHddUnlock; + +/** Offset 0x06AF - PCH Sata Rst Led Locate + Indicates that the LED/SGPIO hardware is attached and ping to locate feature is + enabled on the OS. + $EN_DIS +**/ + UINT8 SataRstLedLocate; + +/** Offset 0x06B0 - PCH Sata Rst Irrt Only + Allow only IRRT drives to span internal and external ports. + $EN_DIS +**/ + UINT8 SataRstIrrtOnly; + +/** Offset 0x06B1 - PCH Sata Rst Smart Storage + RST Smart Storage caching Bit. + $EN_DIS +**/ + UINT8 SataRstSmartStorage; + +/** Offset 0x06B2 - PCH Sata Rst Pcie Storage Remap enable + Enable Intel RST for PCIe Storage remapping. +**/ + UINT8 SataRstPcieEnable[3]; + +/** Offset 0x06B5 - PCH Sata Rst Pcie Storage Port + Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect). +**/ + UINT8 SataRstPcieStoragePort[3]; + +/** Offset 0x06B8 - PCH Sata Rst Pcie Device Reset Delay + PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms +**/ + UINT8 SataRstPcieDeviceResetDelay[3]; + +/** Offset 0x06BB - Enable eMMC HS400 Training + Deprecated. + $EN_DIS +**/ + UINT8 PchScsEmmcHs400TuningRequired; + +/** Offset 0x06BC - Set HS400 Tuning Data Valid + Set if HS400 Tuning Data Valid. + $EN_DIS +**/ + UINT8 PchScsEmmcHs400DllDataValid; + +/** Offset 0x06BD - Rx Strobe Delay Control + Rx Strobe Delay Control - Rx Strobe Delay DLL 1 (HS400 Mode). +**/ + UINT8 PchScsEmmcHs400RxStrobeDll1; + +/** Offset 0x06BE - Tx Data Delay Control + Tx Data Delay Control 1 - Tx Data Delay (HS400 Mode). +**/ + UINT8 PchScsEmmcHs400TxDataDll; + +/** Offset 0x06BF - I/O Driver Strength + Deprecated. + 0:33 Ohm, 1:40 Ohm, 2:50 Ohm +**/ + UINT8 PchScsEmmcHs400DriverStrength; + +/** Offset 0x06C0 - Enable Serial IRQ + Determines if enable Serial IRQ. + $EN_DIS +**/ + UINT8 PchSirqEnable; + +/** Offset 0x06C1 - Serial IRQ Mode Select + Serial IRQ Mode Select, 0: quiet mode, 1: continuous mode. + $EN_DIS +**/ + UINT8 PchSirqMode; + +/** Offset 0x06C2 - Start Frame Pulse Width + Start Frame Pulse Width, 0: PchSfpw4Clk, 1: PchSfpw6Clk, 2: PchSfpw8Clk. + 0: PchSfpw4Clk, 1: PchSfpw6Clk, 2: PchSfpw8Clk +**/ + UINT8 PchStartFramePulse; + +/** Offset 0x06C3 - Reserved + Reserved + $EN_DIS +**/ + UINT8 ReservedForFuture1; + +/** Offset 0x06C4 - Thermal Device SMI Enable + This locks down SMI Enable on Alert Thermal Sensor Trip. + $EN_DIS +**/ + UINT8 PchTsmicLock; + +/** Offset 0x06C5 +**/ + UINT8 UnusedUpdSpace17; + +/** Offset 0x06C6 - Thermal Throttling Custimized T0Level Value + Custimized T0Level value. +**/ + UINT16 PchT0Level; + +/** Offset 0x06C8 - Thermal Throttling Custimized T1Level Value + Custimized T1Level value. +**/ + UINT16 PchT1Level; + +/** Offset 0x06CA - Thermal Throttling Custimized T2Level Value + Custimized T2Level value. +**/ + UINT16 PchT2Level; + +/** Offset 0x06CC - Enable The Thermal Throttle + Enable the thermal throttle function. + $EN_DIS +**/ + UINT8 PchTTEnable; + +/** Offset 0x06CD - PMSync State 13 + When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force + at least T2 state. + $EN_DIS +**/ + UINT8 PchTTState13Enable; + +/** Offset 0x06CE - Thermal Throttle Lock + Thermal Throttle Lock. + $EN_DIS +**/ + UINT8 PchTTLock; + +/** Offset 0x06CF - Thermal Throttling Suggested Setting + Thermal Throttling Suggested Setting. + $EN_DIS +**/ + UINT8 TTSuggestedSetting; + +/** Offset 0x06D0 - Enable PCH Cross Throttling + Enable/Disable PCH Cross Throttling + $EN_DIS +**/ + UINT8 TTCrossThrottling; + +/** Offset 0x06D1 - DMI Thermal Sensor Autonomous Width Enable + DMI Thermal Sensor Autonomous Width Enable. + $EN_DIS +**/ + UINT8 PchDmiTsawEn; + +/** Offset 0x06D2 - DMI Thermal Sensor Suggested Setting + DMT thermal sensor suggested representative values. + $EN_DIS +**/ + UINT8 DmiSuggestedSetting; + +/** Offset 0x06D3 - Thermal Sensor 0 Target Width + DMT thermal sensor suggested representative values. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS0TW; + +/** Offset 0x06D4 - Thermal Sensor 1 Target Width + Thermal Sensor 1 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS1TW; + +/** Offset 0x06D5 - Thermal Sensor 2 Target Width + Thermal Sensor 2 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS2TW; + +/** Offset 0x06D6 - Thermal Sensor 3 Target Width + Thermal Sensor 3 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS3TW; + +/** Offset 0x06D7 - Port 0 T1 Multipler + Port 0 T1 Multipler. +**/ + UINT8 SataP0T1M; + +/** Offset 0x06D8 - Port 0 T2 Multipler + Port 0 T2 Multipler. +**/ + UINT8 SataP0T2M; + +/** Offset 0x06D9 - Port 0 T3 Multipler + Port 0 T3 Multipler. +**/ + UINT8 SataP0T3M; + +/** Offset 0x06DA - Port 0 Tdispatch + Port 0 Tdispatch. +**/ + UINT8 SataP0TDisp; + +/** Offset 0x06DB - Port 1 T1 Multipler + Port 1 T1 Multipler. +**/ + UINT8 SataP1T1M; + +/** Offset 0x06DC - Port 1 T2 Multipler + Port 1 T2 Multipler. +**/ + UINT8 SataP1T2M; + +/** Offset 0x06DD - Port 1 T3 Multipler + Port 1 T3 Multipler. +**/ + UINT8 SataP1T3M; + +/** Offset 0x06DE - Port 1 Tdispatch + Port 1 Tdispatch. +**/ + UINT8 SataP1TDisp; + +/** Offset 0x06DF - Port 0 Tinactive + Port 0 Tinactive. +**/ + UINT8 SataP0Tinact; + +/** Offset 0x06E0 - Port 0 Alternate Fast Init Tdispatch + Port 0 Alternate Fast Init Tdispatch. + $EN_DIS +**/ + UINT8 SataP0TDispFinit; + +/** Offset 0x06E1 - Port 1 Tinactive + Port 1 Tinactive. +**/ + UINT8 SataP1Tinact; + +/** Offset 0x06E2 - Port 1 Alternate Fast Init Tdispatch + Port 1 Alternate Fast Init Tdispatch. + $EN_DIS +**/ + UINT8 SataP1TDispFinit; + +/** Offset 0x06E3 - Sata Thermal Throttling Suggested Setting + Sata Thermal Throttling Suggested Setting. + $EN_DIS +**/ + UINT8 SataThermalSuggestedSetting; + +/** Offset 0x06E4 - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. + $EN_DIS +**/ + UINT8 PchMemoryThrottlingEnable; + +/** Offset 0x06E5 - Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryPmsyncEnable[2]; + +/** Offset 0x06E7 - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryC0TransmitEnable[2]; + +/** Offset 0x06E9 - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryPinSelection[2]; + +/** Offset 0x06EB +**/ + UINT8 UnusedUpdSpace18; + +/** Offset 0x06EC - Thermal Device Temperature + Decides the temperature. +**/ + UINT16 PchTemperatureHotLevel; + +/** Offset 0x06EE - Enable xHCI Compliance Mode + Compliance Mode can be enabled for testing through this option but this is disabled + by default. + $EN_DIS +**/ + UINT8 PchEnableComplianceMode; + +/** Offset 0x06EF - USB2 Port Over Current Pin + Describe the specific over current pin number of USB 2.0 Port N. +**/ + UINT8 Usb2OverCurrentPin[16]; + +/** Offset 0x06FF - USB3 Port Over Current Pin + Describe the specific over current pin number of USB 3.0 Port N. +**/ + UINT8 Usb3OverCurrentPin[10]; + +/** Offset 0x0709 - Enable 8254 Static Clock Gating + Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time + might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support + boot legacy OS using 8254 timer. Also enable this while S0ix is enabled. + $EN_DIS +**/ + UINT8 Enable8254ClockGating; + +/** Offset 0x070A - PCH Sata Rst Optane Memory + Optane Memory + $EN_DIS +**/ + UINT8 SataRstOptaneMemory; + +/** Offset 0x070B - PCH Sata Rst CPU Attached Storage + CPU Attached Storage + $EN_DIS +**/ + UINT8 SataRstCpuAttachedStorage; + +/** Offset 0x070C - Enable 8254 Static Clock Gating On S3 + This is only applicable when Enable8254ClockGating is disabled. FSP will do the + 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This + avoids the SMI requirement for the programming. + $EN_DIS +**/ + UINT8 Enable8254ClockGatingOnS3; + +/** Offset 0x070D +**/ + UINT8 UnusedUpdSpace19[3]; + +/** Offset 0x0710 - Pch PCIE device override table pointer + The PCIe device table is being used to override PCIe device ASPM settings. This + is a pointer points to a 32bit address. And it's only used in PostMem phase. Please + refer to PCH_PCIE_DEVICE_OVERRIDE structure for the table. Last entry VendorId + must be 0. +**/ + UINT32 PchPcieDeviceOverrideTablePtr; + +/** Offset 0x0714 - Enable TCO timer. + When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have + huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer + emulation must be enabled, and WDAT table must not be exposed to the OS. + $EN_DIS +**/ + UINT8 EnableTcoTimer; + +/** Offset 0x0715 - Enable PS_ON. + PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power + target that will be required by the California Energy Commission (CEC). When FALSE, + PS_ON is to be disabled. + $EN_DIS +**/ + UINT8 PsOnEnable; + +/** Offset 0x0716 - Pmc Cpu C10 Gate Pin Enable + Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO + and VccSTG rails instead of SLP_S0# pin. + $EN_DIS +**/ + UINT8 PmcCpuC10GatePinEnable; + +/** Offset 0x0717 - Pch Dmi Aspm Ctrl + ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b> + 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto +**/ + UINT8 PchDmiAspmCtrl; + +/** Offset 0x0718 - ReservedPchPostMem + Reserved for Pch Post-Mem + $EN_DIS +**/ + UINT8 ReservedPchPostMem[16]; + +/** Offset 0x0728 - BgpdtHash[4] + BgpdtHash values +**/ + UINT64 BgpdtHash[4]; + +/** Offset 0x0748 - BiosGuardAttr + BiosGuardAttr default values +**/ + UINT32 BiosGuardAttr; + +/** Offset 0x074C +**/ + UINT8 UnusedUpdSpace20[4]; + +/** Offset 0x0750 - BiosGuardModulePtr + BiosGuardModulePtr default values +**/ + UINT64 BiosGuardModulePtr; + +/** Offset 0x0758 - SendEcCmd + SendEcCmd function pointer. \n + @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE + EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode +**/ + UINT64 SendEcCmd; + +/** Offset 0x0760 - EcCmdProvisionEav + Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC +**/ + UINT8 EcCmdProvisionEav; + +/** Offset 0x0761 - EcCmdLock + EcCmdLock default values. Locks Ephemeral Authorization Value sent previously +**/ + UINT8 EcCmdLock; + +/** Offset 0x0762 +**/ + UINT8 UnusedUpdSpace21[6]; + +/** Offset 0x0768 - SgxEpoch0 + SgxEpoch0 default values +**/ + UINT64 SgxEpoch0; + +/** Offset 0x0770 - SgxEpoch1 + SgxEpoch1 default values +**/ + UINT64 SgxEpoch1; + +/** Offset 0x0778 - SgxSinitNvsData + SgxSinitNvsData default values +**/ + UINT8 SgxSinitNvsData; + +/** Offset 0x0779 - Si Config CSM Flag. + Platform specific common policies that used by several silicon components. CSM status flag. + $EN_DIS +**/ + UINT8 SiCsmFlag; + +/** Offset 0x077A +**/ + UINT8 UnusedUpdSpace22[2]; + +/** Offset 0x077C - SVID SDID table Poniter. + The address of the table of SVID SDID to customize each SVID SDID entry. +**/ + UINT32 SiSsidTablePtr; + +/** Offset 0x0780 - Number of ssid table. + SiNumberOfSsidTableEntry should match the table entries created in SiSsidTablePtr. +**/ + UINT16 SiNumberOfSsidTableEntry; + +/** Offset 0x0782 - SATA RST Interrupt Mode + Allowes to choose which interrupts will be implemented by SATA controller in RAID mode. + 0:Msix, 1:Msi, 2:Legacy +**/ + UINT8 SataRstInterrupt; + +/** Offset 0x0783 - ME Unconfig on RTC clear + 0: Disable ME Unconfig On Rtc Clear. <b>1: Enable ME Unconfig On Rtc Clear</b>. + 2: Cmos is clear, status unkonwn. 3: Reserved + 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos + is clear, 3: Reserved +**/ + UINT8 MeUnconfigOnRtcClear; + +/** Offset 0x0784 +**/ + UINT8 UnusedUpdSpace23[3]; + +/** Offset 0x0787 +**/ + UINT8 ReservedFspsUpd[1]; +} FSP_S_CONFIG; + +/** Fsp S Test Configuration +**/ +typedef struct { + +/** Offset 0x0788 +**/ + UINT32 Signature; + +/** Offset 0x078C - Enable/Disable Device 7 + Enable: Device 7 enabled, Disable (Default): Device 7 disabled + $EN_DIS +**/ + UINT8 ChapDeviceEnable; + +/** Offset 0x078D - Skip PAM register lock + Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): + PAM registers will be locked by RC + $EN_DIS +**/ + UINT8 SkipPamLock; + +/** Offset 0x078E - EDRAM Test Mode + Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): + PAM registers will be locked by RC + 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode +**/ + UINT8 EdramTestMode; + +/** Offset 0x078F - DMI Extended Sync Control + Enable: Enable DMI Extended Sync Control, Disable(Default): Disable DMI Extended + Sync Control + $EN_DIS +**/ + UINT8 DmiExtSync; + +/** Offset 0x0790 - DMI IOT Control + Enable: Enable DMI IOT Control, Disable(Default): Disable DMI IOT Control + $EN_DIS +**/ + UINT8 DmiIot; + +/** Offset 0x0791 - PEG Max Payload size per root port + 0xFF(Default):Auto, 0x1: Force 128B, 0x2: Force 256B + 0xFF: Auto, 0x1: Force 128B, 0x2: Force 256B +**/ + UINT8 PegMaxPayload[4]; + +/** Offset 0x0795 - Enable/Disable IGFX RenderStandby + Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby + $EN_DIS +**/ + UINT8 RenderStandby; + +/** Offset 0x0796 - Enable/Disable IGFX PmSupport + Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport + $EN_DIS +**/ + UINT8 PmSupport; + +/** Offset 0x0797 - Enable/Disable CdynmaxClamp + Enable(Default): Enable CdynmaxClamp, Disable: Disable CdynmaxClamp + $EN_DIS +**/ + UINT8 CdynmaxClampEnable; + +/** Offset 0x0798 - Disable VT-d + 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) + $EN_DIS +**/ + UINT8 VtdDisableDeprecated; + +/** Offset 0x0799 - GT Frequency Limit + 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, + 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: + 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, + 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, + 0x18: 1200 Mhz + 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, + 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: + 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, + 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, + 0x18: 1200 Mhz +**/ + UINT8 GtFreqMax; + +/** Offset 0x079A - Disable Turbo GT + 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency + $EN_DIS +**/ + UINT8 DisableTurboGt; + +/** Offset 0x079B - SaPostMemTestRsvd + Reserved for SA Post-Mem Test + $EN_DIS +**/ + UINT8 SaPostMemTestRsvd[11]; + +/** Offset 0x07A6 - 1-Core Ratio Limit + 1-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 1-Core + Ratio Limit Must be greater than or equal to 2-Core Ratio Limit, 3-Core Ratio Limit, + 4-Core Ratio Limit, 5-Core Ratio Limit, 6-Core Ratio Limit, 7-Core Ratio Limit, + 8-Core Ratio Limit. Range is 0 to 255 +**/ + UINT8 OneCoreRatioLimit; + +/** Offset 0x07A7 - 2-Core Ratio Limit + 2-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 2-Core + Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 +**/ + UINT8 TwoCoreRatioLimit; + +/** Offset 0x07A8 - 3-Core Ratio Limit + 3-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 3-Core + Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 +**/ + UINT8 ThreeCoreRatioLimit; + +/** Offset 0x07A9 - 4-Core Ratio Limit + 4-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 4-Core + Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 +**/ + UINT8 FourCoreRatioLimit; + +/** Offset 0x07AA - Enable or Disable HWP + Enable or Disable HWP(Hardware P states) Support. 0: Disable; <b>1: Enable;</b> + 2-3:Reserved + $EN_DIS +**/ + UINT8 Hwp; + +/** Offset 0x07AB - Hardware Duty Cycle Control + Hardware Duty Cycle Control configuration. 0: Disabled; <b>1: Enabled</b> 2-3:Reserved + $EN_DIS +**/ + UINT8 HdcControl; + +/** Offset 0x07AC - Package Long duration turbo mode time + Package Long duration turbo mode time window in seconds. 0 = AUTO, uses 28 seconds. + Valid values(Unit in seconds) 1 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 + , 48 , 56 , 64 , 80 , 96 , 112 , 128 +**/ + UINT8 PowerLimit1Time; + +/** Offset 0x07AD - Short Duration Turbo Mode + Enable or Disable short duration Turbo Mode. </b>0 : Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 PowerLimit2; + +/** Offset 0x07AE - Turbo settings Lock + Lock all Turbo settings Enable/Disable; <b>0: Disable , </b> 1: Enable + $EN_DIS +**/ + UINT8 TurboPowerLimitLock; + +/** Offset 0x07AF - Package PL3 time window + Package PL3 time window range for this policy from 0 to 64ms +**/ + UINT8 PowerLimit3Time; + +/** Offset 0x07B0 - Package PL3 Duty Cycle + Package PL3 Duty Cycle; Valid Range is 0 to 100 +**/ + UINT8 PowerLimit3DutyCycle; + +/** Offset 0x07B1 - Package PL3 Lock + Package PL3 Lock Enable/Disable; <b>0: Disable ; <b> 1: Enable + $EN_DIS +**/ + UINT8 PowerLimit3Lock; + +/** Offset 0x07B2 - Package PL4 Lock + Package PL4 Lock Enable/Disable; <b>0: Disable ; <b>1: Enable + $EN_DIS +**/ + UINT8 PowerLimit4Lock; + +/** Offset 0x07B3 - TCC Activation Offset + TCC Activation Offset. Offset from factory set TCC activation temperature at which + the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation + Temperature, in volts.For Y SKU, the recommended default for this policy is <b>15</b>, + For all other SKUs the recommended default are <b>0</b> +**/ + UINT8 TccActivationOffset; + +/** Offset 0x07B4 - Tcc Offset Clamp Enable/Disable + Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle + below P1.For Y SKU, the recommended default for this policy is <b>1: Enabled</b>, + For all other SKUs the recommended default are <b>0: Disabled</b>. + $EN_DIS +**/ + UINT8 TccOffsetClamp; + +/** Offset 0x07B5 - Tcc Offset Lock + Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature + target; <b>0: Disabled</b>; 1: Enabled. + $EN_DIS +**/ + UINT8 TccOffsetLock; + +/** Offset 0x07B6 - Custom Ratio State Entries + The number of custom ratio state entries, ranges from 0 to 40 for a valid custom + ratio table.Sets the number of custom P-states. At least 2 states must be present +**/ + UINT8 NumberOfEntries; + +/** Offset 0x07B7 - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 + to 128, 0 = AUTO +**/ + UINT8 Custom1PowerLimit1Time; + +/** Offset 0x07B8 - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255 +**/ + UINT8 Custom1TurboActivationRatio; + +/** Offset 0x07B9 - Custom Config Tdp Control + Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 +**/ + UINT8 Custom1ConfigTdpControl; + +/** Offset 0x07BA - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 + to 128, 0 = AUTO +**/ + UINT8 Custom2PowerLimit1Time; + +/** Offset 0x07BB - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255 +**/ + UINT8 Custom2TurboActivationRatio; + +/** Offset 0x07BC - Custom Config Tdp Control + Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 +**/ + UINT8 Custom2ConfigTdpControl; + +/** Offset 0x07BD - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 + to 128, 0 = AUTO +**/ + UINT8 Custom3PowerLimit1Time; + +/** Offset 0x07BE - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255 +**/ + UINT8 Custom3TurboActivationRatio; + +/** Offset 0x07BF - Custom Config Tdp Control + Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 +**/ + UINT8 Custom3ConfigTdpControl; + +/** Offset 0x07C0 - ConfigTdp mode settings Lock + Lock the ConfigTdp mode settings from runtime changes; <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 ConfigTdpLock; + +/** Offset 0x07C1 - Load Configurable TDP SSDT + Configure whether to load Configurable TDP SSDT; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 ConfigTdpBios; + +/** Offset 0x07C2 - PL1 Enable value + PL1 Enable value to limit average platform power. <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 PsysPowerLimit1; + +/** Offset 0x07C3 - PL1 timewindow + PL1 timewindow in seconds. 0 = AUTO, uses 28 seconds. Valid values(Unit in seconds) + 1 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 +**/ + UINT8 PsysPowerLimit1Time; + +/** Offset 0x07C4 - PL2 Enable Value + PL2 Enable activates the PL2 value to limit average platform power.<b>0: Disable</b>; + 1: Enable. + $EN_DIS +**/ + UINT8 PsysPowerLimit2; + +/** Offset 0x07C5 - Enable or Disable MLC Streamer Prefetcher + Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 MlcStreamerPrefetcher; + +/** Offset 0x07C6 - Enable or Disable MLC Spatial Prefetcher + Enable or Disable MLC Spatial Prefetcher; 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 MlcSpatialPrefetcher; + +/** Offset 0x07C7 - Enable or Disable Monitor /MWAIT instructions + Enable or Disable Monitor /MWAIT instructions; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 MonitorMwaitEnable; + +/** Offset 0x07C8 - Enable or Disable initialization of machine check registers + Enable or Disable initialization of machine check registers; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 MachineCheckEnable; + +/** Offset 0x07C9 - Deprecated DO NOT USE Enable or Disable processor debug features + @deprecated Enable or Disable processor debug features; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 DebugInterfaceEnable; + +/** Offset 0x07CA - Lock or Unlock debug interface features + Lock or Unlock debug interface features; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 DebugInterfaceLockEnable; + +/** Offset 0x07CB - AP Idle Manner of waiting for SIPI + AP Idle Manner of waiting for SIPI; 1: HALT loop; <b>2: MWAIT loop</b>; 3: RUN loop. + 1: HALT loop, 2: MWAIT loop, 3: RUN loop +**/ + UINT8 ApIdleManner; + +/** Offset 0x07CC - Control on Processor Trace output scheme + Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output. + 0: Single Range Output, 1: ToPA Output +**/ + UINT8 ProcessorTraceOutputScheme; + +/** Offset 0x07CD - Enable or Disable Processor Trace feature + Enable or Disable Processor Trace feature; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 ProcessorTraceEnable; + +/** Offset 0x07CE +**/ + UINT8 UnusedUpdSpace24[2]; + +/** Offset 0x07D0 - Base of memory region allocated for Processor Trace + Base address of memory region allocated for Processor Trace. Processor Trace requires + 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b> +**/ + UINT64 ProcessorTraceMemBase; + +/** Offset 0x07D8 - Memory region allocation for Processor Trace + Length in bytes of memory region allocated for Processor Trace. Processor Trace + requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b> +**/ + UINT32 ProcessorTraceMemLength; + +/** Offset 0x07DC - Enable or Disable Voltage Optimization feature + Enable or Disable Voltage Optimization feature 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 VoltageOptimization; + +/** Offset 0x07DD - Enable or Disable Intel SpeedStep Technology + Enable or Disable Intel SpeedStep Technology. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 Eist; + +/** Offset 0x07DE - Enable or Disable Energy Efficient P-state + Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable; + <b>1: Enable</b> + $EN_DIS +**/ + UINT8 EnergyEfficientPState; + +/** Offset 0x07DF - Enable or Disable Energy Efficient Turbo + Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable; + <b>1: Enable</b> + $EN_DIS +**/ + UINT8 EnergyEfficientTurbo; + +/** Offset 0x07E0 - Enable or Disable T states + Enable or Disable T states; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 TStates; + +/** Offset 0x07E1 - Enable or Disable Bi-Directional PROCHOT# + Enable or Disable Bi-Directional PROCHOT#; 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 BiProcHot; + +/** Offset 0x07E2 - Enable or Disable PROCHOT# signal being driven externally + Enable or Disable PROCHOT# signal being driven externally; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 DisableProcHotOut; + +/** Offset 0x07E3 - Enable or Disable PROCHOT# Response + Enable or Disable PROCHOT# Response; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 ProcHotResponse; + +/** Offset 0x07E4 - Enable or Disable VR Thermal Alert + Enable or Disable VR Thermal Alert; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 DisableVrThermalAlert; + +/** Offset 0x07E5 - Enable or Disable Thermal Reporting + Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 AutoThermalReporting; + +/** Offset 0x07E6 - Enable or Disable Thermal Monitor + Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 ThermalMonitor; + +/** Offset 0x07E7 - Enable or Disable CPU power states (C-states) + Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 Cx; + +/** Offset 0x07E8 - Configure C-State Configuration Lock + Configure C-State Configuration Lock; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 PmgCstCfgCtrlLock; + +/** Offset 0x07E9 - Enable or Disable Enhanced C-states + Enable or Disable Enhanced C-states. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 C1e; + +/** Offset 0x07EA - Enable or Disable Package Cstate Demotion + Enable or Disable Package Cstate Demotion. <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 PkgCStateDemotion; + +/** Offset 0x07EB - Enable or Disable Package Cstate UnDemotion + Enable or Disable Package Cstate UnDemotion. <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 PkgCStateUnDemotion; + +/** Offset 0x07EC - Enable or Disable CState-Pre wake + Enable or Disable CState-Pre wake. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 CStatePreWake; + +/** Offset 0x07ED - Enable or Disable TimedMwait Support. + Enable or Disable TimedMwait Support. <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 TimedMwait; + +/** Offset 0x07EE - Enable or Disable IO to MWAIT redirection + Enable or Disable IO to MWAIT redirection; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 CstCfgCtrIoMwaitRedirection; + +/** Offset 0x07EF - Set the Max Pkg Cstate + Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep + C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S , + 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto +**/ + UINT8 PkgCStateLimit; + +/** Offset 0x07F0 - TimeUnit for C-State Latency Control0 + TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl0TimeUnit; + +/** Offset 0x07F1 - TimeUnit for C-State Latency Control1 + TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl1TimeUnit; + +/** Offset 0x07F2 - TimeUnit for C-State Latency Control2 + TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl2TimeUnit; + +/** Offset 0x07F3 - TimeUnit for C-State Latency Control3 + TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl3TimeUnit; + +/** Offset 0x07F4 - TimeUnit for C-State Latency Control4 + Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl4TimeUnit; + +/** Offset 0x07F5 - TimeUnit for C-State Latency Control5 + TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl5TimeUnit; + +/** Offset 0x07F6 - Interrupt Redirection Mode Select + Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;4: + PAIR with fixed priority;5: PAIR with round robin;6: PAIR with hash vector;7: No change. +**/ + UINT8 PpmIrmSetting; + +/** Offset 0x07F7 - Lock prochot configuration + Lock prochot configuration Enable/Disable; <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 ProcHotLock; + +/** Offset 0x07F8 - Configuration for boot TDP selection + Configuration for boot TDP selection; <b>0: TDP Nominal</b>; 1: TDP Down; 2: TDP + Up;0xFF : Deactivate +**/ + UINT8 ConfigTdpLevel; + +/** Offset 0x07F9 - Race To Halt + Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency + in order to enter pkg C-State faster to reduce overall power. (RTH is controlled + through MSR 1FC bit 20)Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 RaceToHalt; + +/** Offset 0x07FA - Max P-State Ratio + Max P-State Ratio, Valid Range 0 to 0x7F +**/ + UINT8 MaxRatio; + +/** Offset 0x07FB - P-state ratios for custom P-state table + P-state ratios for custom P-state table. NumberOfEntries has valid range between + 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries] + are configurable. Valid Range of each entry is 0 to 0x7F +**/ + UINT8 StateRatio[40]; + +/** Offset 0x0823 - P-state ratios for max 16 version of custom P-state table + P-state ratios for max 16 version of custom P-state table. This table is used for + OS versions limited to a max of 16 P-States. If the first entry of this table is + 0, or if Number of Entries is 16 or less, then this table will be ignored, and + up to the top 16 values of the StateRatio table will be used instead. Valid Range + of each entry is 0 to 0x7F +**/ + UINT8 StateRatioMax16[16]; + +/** Offset 0x0833 +**/ + UINT8 UnusedUpdSpace25; + +/** Offset 0x0834 - Platform Power Pmax + PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments. + Range 0-1024 Watts. Value of 800 = 100W +**/ + UINT16 PsysPmax; + +/** Offset 0x0836 - Interrupt Response Time Limit of C-State LatencyContol0 + Interrupt Response Time Limit of C-State LatencyContol0.Range of value 0 to 0x3FF +**/ + UINT16 CstateLatencyControl0Irtl; + +/** Offset 0x0838 - Interrupt Response Time Limit of C-State LatencyContol1 + Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF +**/ + UINT16 CstateLatencyControl1Irtl; + +/** Offset 0x083A - Interrupt Response Time Limit of C-State LatencyContol2 + Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF +**/ + UINT16 CstateLatencyControl2Irtl; + +/** Offset 0x083C - Interrupt Response Time Limit of C-State LatencyContol3 + Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF +**/ + UINT16 CstateLatencyControl3Irtl; + +/** Offset 0x083E - Interrupt Response Time Limit of C-State LatencyContol4 + Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF +**/ + UINT16 CstateLatencyControl4Irtl; + +/** Offset 0x0840 - Interrupt Response Time Limit of C-State LatencyContol5 + Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF +**/ + UINT16 CstateLatencyControl5Irtl; + +/** Offset 0x0842 +**/ + UINT8 UnusedUpdSpace26[2]; + +/** Offset 0x0844 - Package Long duration turbo mode power limit + Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. + Valid Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit1; + +/** Offset 0x0848 - Package Short duration turbo mode power limit + Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit2Power; + +/** Offset 0x084C - Package PL3 power limit + Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit3; + +/** Offset 0x0850 - Package PL4 power limit + Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 1023875 in Step size of 125 +**/ + UINT32 PowerLimit4; + +/** Offset 0x0854 - Tcc Offset Time Window for RATL + Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 1023875 in Step size of 125 +**/ + UINT32 TccOffsetTimeWindowForRatl; + +/** Offset 0x0858 - Short term Power Limit value for custom cTDP level 1 + Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom1PowerLimit1; + +/** Offset 0x085C - Long term Power Limit value for custom cTDP level 1 + Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom1PowerLimit2; + +/** Offset 0x0860 - Short term Power Limit value for custom cTDP level 2 + Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom2PowerLimit1; + +/** Offset 0x0864 - Long term Power Limit value for custom cTDP level 2 + Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom2PowerLimit2; + +/** Offset 0x0868 - Short term Power Limit value for custom cTDP level 3 + Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom3PowerLimit1; + +/** Offset 0x086C - Long term Power Limit value for custom cTDP level 3 + Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom3PowerLimit2; + +/** Offset 0x0870 - Platform PL1 power + Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range + 0 to 4095875 in Step size of 125 +**/ + UINT32 PsysPowerLimit1Power; + +/** Offset 0x0874 - Platform PL2 power + Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range + 0 to 4095875 in Step size of 125 +**/ + UINT32 PsysPowerLimit2Power; + +/** Offset 0x0878 - Set Three Strike Counter Disable + False (default): Three Strike counter will be incremented and True: Prevents Three + Strike counter from incrementing; <b>0: False</b>; 1: True. + 0: False, 1: True +**/ + UINT8 ThreeStrikeCounterDisable; + +/** Offset 0x0879 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT + Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 HwpInterruptControl; + +/** Offset 0x087A - 5-Core Ratio Limit + 5-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 5-Core + Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 + 0x0:0xFF +**/ + UINT8 FiveCoreRatioLimit; + +/** Offset 0x087B - 6-Core Ratio Limit + 6-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 6-Core + Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 + 0x0:0xFF +**/ + UINT8 SixCoreRatioLimit; + +/** Offset 0x087C - 7-Core Ratio Limit + 7-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 7-Core + Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 + 0x0:0xFF +**/ + UINT8 SevenCoreRatioLimit; + +/** Offset 0x087D - 8-Core Ratio Limit + 8-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 8-Core + Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 + 0x0:0xFF +**/ + UINT8 EightCoreRatioLimit; + +/** Offset 0x087E - Intel Turbo Boost Max Technology 3.0 + Intel Turbo Boost Max Technology 3.0. 0: Disabled; <b>1: Enabled</b> + $EN_DIS +**/ + UINT8 EnableItbm; + +/** Offset 0x087F - Intel Turbo Boost Max Technology 3.0 Driver + Intel Turbo Boost Max Technology 3.0 Driver <b>0: Disabled</b>; 1: Enabled + $EN_DIS +**/ + UINT8 EnableItbmDriver; + +/** Offset 0x0880 - Enable or Disable C1 Cstate Demotion + Enable or Disable C1 Cstate Demotion. Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 C1StateAutoDemotion; + +/** Offset 0x0881 - Enable or Disable C1 Cstate UnDemotion + Enable or Disable C1 Cstate UnDemotion. Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 C1StateUnDemotion; + +/** Offset 0x0882 - CpuWakeUpTimer + Enable long CPU Wakeup Timer. When enabled, the cpu internal wakeup time is increased + to 180 seconds. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 CpuWakeUpTimer; + +/** Offset 0x0883 - Minimum Ring ratio limit override + Minimum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo + ratio limit +**/ + UINT8 MinRingRatioLimit; + +/** Offset 0x0884 - Minimum Ring ratio limit override + Maximum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo + ratio limit +**/ + UINT8 MaxRingRatioLimit; + +/** Offset 0x0885 - Enable or Disable C3 Cstate Demotion + Enable or Disable C3 Cstate Demotion. Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 C3StateAutoDemotion; + +/** Offset 0x0886 - Enable or Disable C3 Cstate UnDemotion + Enable or Disable C3 Cstate UnDemotion. Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 C3StateUnDemotion; + +/** Offset 0x0887 - ReservedCpuPostMemTest + Reserved for CPU Post-Mem Test + $EN_DIS +**/ + UINT8 ReservedCpuPostMemTest[19]; + +/** Offset 0x089A - SgxSinitDataFromTpm + SgxSinitDataFromTpm default values +**/ + UINT8 SgxSinitDataFromTpm; + +/** Offset 0x089B - End of Post message + Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1): + EOP send in PEI, Send in DXE(0x2)(Default): EOP send in PEI + 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved +**/ + UINT8 EndOfPostMessage; + +/** Offset 0x089C - D0I3 Setting for HECI Disable + Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all + HECI devices + $EN_DIS +**/ + UINT8 DisableD0I3SettingForHeci; + +/** Offset 0x089D +**/ + UINT8 UnusedUpdSpace27; + +/** Offset 0x089E - HD Audio Reset Wait Timer + The delay timer after Azalia reset, the value is number of microseconds. Default is 600. +**/ + UINT16 PchHdaResetWaitTimer; + +/** Offset 0x08A0 - Enable LOCKDOWN SMI + Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. + $EN_DIS +**/ + UINT8 PchLockDownGlobalSmi; + +/** Offset 0x08A1 - Enable LOCKDOWN BIOS Interface + Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. + $EN_DIS +**/ + UINT8 PchLockDownBiosInterface; + +/** Offset 0x08A2 - Unlock all GPIO pads + Force all GPIO pads to be unlocked for debug purpose. + $EN_DIS +**/ + UINT8 PchUnlockGpioPads; + +/** Offset 0x08A3 - PCH Unlock SideBand access + The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before + 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access. + $EN_DIS +**/ + UINT8 PchSbAccessUnlock; + +/** Offset 0x08A4 - PCIE RP Ltr Max Snoop Latency + Latency Tolerance Reporting, Max Snoop Latency. +**/ + UINT16 PcieRpLtrMaxSnoopLatency[24]; + +/** Offset 0x08D4 - PCIE RP Ltr Max No Snoop Latency + Latency Tolerance Reporting, Max Non-Snoop Latency. +**/ + UINT16 PcieRpLtrMaxNoSnoopLatency[24]; + +/** Offset 0x0904 - PCIE RP Snoop Latency Override Mode + Latency Tolerance Reporting, Snoop Latency Override Mode. +**/ + UINT8 PcieRpSnoopLatencyOverrideMode[24]; + +/** Offset 0x091C - PCIE RP Snoop Latency Override Multiplier + Latency Tolerance Reporting, Snoop Latency Override Multiplier. +**/ + UINT8 PcieRpSnoopLatencyOverrideMultiplier[24]; + +/** Offset 0x0934 - PCIE RP Snoop Latency Override Value + Latency Tolerance Reporting, Snoop Latency Override Value. +**/ + UINT16 PcieRpSnoopLatencyOverrideValue[24]; + +/** Offset 0x0964 - PCIE RP Non Snoop Latency Override Mode + Latency Tolerance Reporting, Non-Snoop Latency Override Mode. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMode[24]; + +/** Offset 0x097C - PCIE RP Non Snoop Latency Override Multiplier + Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24]; + +/** Offset 0x0994 - PCIE RP Non Snoop Latency Override Value + Latency Tolerance Reporting, Non-Snoop Latency Override Value. +**/ + UINT16 PcieRpNonSnoopLatencyOverrideValue[24]; + +/** Offset 0x09C4 - PCIE RP Slot Power Limit Scale + Specifies scale used for slot power limit value. Leave as 0 to set to default. +**/ + UINT8 PcieRpSlotPowerLimitScale[24]; + +/** Offset 0x09DC - PCIE RP Slot Power Limit Value + Specifies upper limit on power supplie by slot. Leave as 0 to set to default. +**/ + UINT16 PcieRpSlotPowerLimitValue[24]; + +/** Offset 0x0A0C - PCIE RP Upstream Port Transmiter Preset + Used during Gen3 Link Equalization. Used for all lanes. Default is 5. +**/ + UINT8 PcieRpUptp[24]; + +/** Offset 0x0A24 - PCIE RP Downstream Port Transmiter Preset + Used during Gen3 Link Equalization. Used for all lanes. Default is 7. +**/ + UINT8 PcieRpDptp[24]; + +/** Offset 0x0A3C - PCIE RP Enable Port8xh Decode + This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable; + 1: Enable. + $EN_DIS +**/ + UINT8 PcieEnablePort8xhDecode; + +/** Offset 0x0A3D - PCIE Port8xh Decode Port Index + The Index of PCIe Port that is selected for Port8xh Decode (0 Based). +**/ + UINT8 PchPciePort8xhDecodePortIndex; + +/** Offset 0x0A3E - PCH Energy Reporting + Disable/Enable PCH to CPU energy report feature. + $EN_DIS +**/ + UINT8 PchPmDisableEnergyReport; + +/** Offset 0x0A3F - PCH Sata Test Mode + Allow entrance to the PCH SATA test modes. + $EN_DIS +**/ + UINT8 SataTestMode; + +/** Offset 0x0A40 - PCH USB OverCurrent mapping lock enable + If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning + that OC mapping data will be consumed by xHCI and OC mapping registers will be locked. + $EN_DIS +**/ + UINT8 PchXhciOcLock; + +/** Offset 0x0A41 - ReservedPchPostMemTest + Reserved for Pch Post-Mem Test + $EN_DIS +**/ + UINT8 ReservedPchPostMemTest[16]; + +/** Offset 0x0A51 - Mctp Broadcast Cycle + Test, Determine if MCTP Broadcast is enabled <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 MctpBroadcastCycle; + +/** Offset 0x0A52 +**/ + UINT8 UnusedUpdSpace28[2]; + +/** Offset 0x0A54 +**/ + UINT8 ReservedFspsTestUpd[12]; +} FSP_S_TEST_CONFIG; + +/** Fsp S UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSP_S_CONFIG FspsConfig; + +/** Offset 0x0788 +**/ + FSP_S_TEST_CONFIG FspsTestConfig; + +/** Offset 0x0A60 +**/ + UINT8 UnusedUpdSpace29[6]; + +/** Offset 0x0A66 +**/ + UINT16 UpdTerminator; +} FSPS_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/cometlake/FsptUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cometlake/FsptUpd.h new file mode 100644 index 0000000..508705c --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/cometlake/FsptUpd.h @@ -0,0 +1,186 @@ +/** @file + +Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPTUPD_H__ +#define __FSPTUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +/** Fsp T Core UPD +**/ +typedef struct { + +/** Offset 0x0020 +**/ + UINT32 MicrocodeRegionBase; + +/** Offset 0x0024 +**/ + UINT32 MicrocodeRegionSize; + +/** Offset 0x0028 +**/ + UINT32 CodeRegionBase; + +/** Offset 0x002C +**/ + UINT32 CodeRegionSize; + +/** Offset 0x0030 +**/ + UINT8 Reserved[16]; +} FSPT_CORE_UPD; + +/** Fsp T Configuration +**/ +typedef struct { + +/** Offset 0x0040 - PcdSerialIoUartDebugEnable + Enable SerialIo Uart debug library with/without initializing SerialIo Uart device in FSP. + 0:Disable, 1:Enable and Initialize, 2:Enable without Initializing +**/ + UINT8 PcdSerialIoUartDebugEnable; + +/** Offset 0x0041 - PcdSerialIoUartNumber - FSPT + Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT + Core interface, it cannot be used for debug purpose. + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 PcdSerialIoUartNumber; + +/** Offset 0x0042 - PcdSerialIoUartMode - FSPT + Select SerialIo Uart Controller mode + 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 PcdSerialIoUartMode; + +/** Offset 0x0043 +**/ + UINT8 UnusedUpdSpace0; + +/** Offset 0x0044 - PcdSerialIoUartBaudRate - FSPT + Set default BaudRate Supported from 0 - default to 6000000 +**/ + UINT32 PcdSerialIoUartBaudRate; + +/** Offset 0x0048 - Pci Express Base Address + Base address to be programmed for Pci Express +**/ + UINT64 PcdPciExpressBaseAddress; + +/** Offset 0x0050 - Pci Express Region Length + Region Length to be programmed for Pci Express +**/ + UINT32 PcdPciExpressRegionLength; + +/** Offset 0x0054 - PcdSerialIoUartParity - FSPT + Set default Parity. + 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 PcdSerialIoUartParity; + +/** Offset 0x0055 - PcdSerialIoUartDataBits - FSPT + Set default word length. 0: Default, 5,6,7,8 +**/ + UINT8 PcdSerialIoUartDataBits; + +/** Offset 0x0056 - PcdSerialIoUartStopBits - FSPT + Set default stop bits. + 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits +**/ + UINT8 PcdSerialIoUartStopBits; + +/** Offset 0x0057 - PcdSerialIoUartAutoFlow - FSPT + Enables UART hardware flow control, CTS and RTS lines. + 0: Disable, 1:Enable +**/ + UINT8 PcdSerialIoUartAutoFlow; + +/** Offset 0x0058 - PcdSerialIoUartRxPinMux - FSPT + Select RX pin muxing for SerialIo UART used for debug +**/ + UINT32 PcdSerialIoUartRxPinMux; + +/** Offset 0x005C - PcdSerialIoUartTxPinMux - FSPT + Select TX pin muxing for SerialIo UART used for debug +**/ + UINT32 PcdSerialIoUartTxPinMux; + +/** Offset 0x0060 - PcdSerialIoUartRtsPinMux - FSPT + Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 PcdSerialIoUartRtsPinMux; + +/** Offset 0x0064 - PcdSerialIoUartCtsPinMux - FSPT + Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 PcdSerialIoUartCtsPinMux; + +/** Offset 0x0068 +**/ + UINT8 ReservedFsptUpd1[24]; +} FSP_T_CONFIG; + +/** Fsp T UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPT_CORE_UPD FsptCoreUpd; + +/** Offset 0x0040 +**/ + FSP_T_CONFIG FsptConfig; + +/** Offset 0x0080 +**/ + UINT8 UnusedUpdSpace1[6]; + +/** Offset 0x0086 +**/ + UINT16 UpdTerminator; +} FSPT_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/cometlake/MemInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/cometlake/MemInfoHob.h new file mode 100644 index 0000000..f1ca44f --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/cometlake/MemInfoHob.h @@ -0,0 +1,274 @@ +/** @file + This file contains definitions required for creation of + Memory S3 Save data, Memory Info data and Memory Platform + data hobs. + + @copyright + Copyright (c) 1999 - 2019, Intel Corporation. All rights reserved.<BR> + This program and the accompanying materials are licensed and made available under + the terms and conditions of the BSD License that accompanies this distribution. + The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php. + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +@par Specification Reference: +**/ +#ifndef _MEM_INFO_HOB_H_ +#define _MEM_INFO_HOB_H_ + +#include <Uefi/UefiMultiPhase.h> +#include <Pi/PiBootMode.h> +#include <Pi/PiHob.h> + +#pragma pack (push, 1) + +extern EFI_GUID gSiMemoryS3DataGuid; +extern EFI_GUID gSiMemoryInfoDataGuid; +extern EFI_GUID gSiMemoryPlatformDataGuid; + +#define MAX_NODE 1 +#define MAX_CH 2 +#define MAX_DIMM 2 + +/// +/// Host reset states from MRC. +/// +#define WARM_BOOT 2 + +#define R_MC_CHNL_RANK_PRESENT 0x7C +#define B_RANK0_PRS BIT0 +#define B_RANK1_PRS BIT1 +#define B_RANK2_PRS BIT4 +#define B_RANK3_PRS BIT5 + +/// +/// Defines taken from MRC so avoid having to include MrcInterface.h +/// + +// +// Matches MAX_SPD_SAVE define in MRC +// +#ifndef MAX_SPD_SAVE +#define MAX_SPD_SAVE 29 +#endif + +// +// MRC version description. +// +typedef struct { + UINT8 Major; ///< Major version number + UINT8 Minor; ///< Minor version number + UINT8 Rev; ///< Revision number + UINT8 Build; ///< Build number +} SiMrcVersion; + +// +// Matches MrcChannelSts enum in MRC +// +#ifndef CHANNEL_NOT_PRESENT +#define CHANNEL_NOT_PRESENT 0 // There is no channel present on the controller. +#endif +#ifndef CHANNEL_DISABLED +#define CHANNEL_DISABLED 1 // There is a channel present but it is disabled. +#endif +#ifndef CHANNEL_PRESENT +#define CHANNEL_PRESENT 2 // There is a channel present and it is enabled. +#endif + +// +// Matches MrcDimmSts enum in MRC +// +#ifndef DIMM_ENABLED +#define DIMM_ENABLED 0 // DIMM/rank Pair is enabled, presence will be detected. +#endif +#ifndef DIMM_DISABLED +#define DIMM_DISABLED 1 // DIMM/rank Pair is disabled, regardless of presence. +#endif +#ifndef DIMM_PRESENT +#define DIMM_PRESENT 2 // There is a DIMM present in the slot/rank pair and it will be used. +#endif +#ifndef DIMM_NOT_PRESENT +#define DIMM_NOT_PRESENT 3 // There is no DIMM present in the slot/rank pair. +#endif + +// +// Matches MrcBootMode enum in MRC +// +#ifndef bmCold +#define bmCold 0 // Cold boot +#endif +#ifndef bmWarm +#define bmWarm 1 // Warm boot +#endif +#ifndef bmS3 +#define bmS3 2 // S3 resume +#endif +#ifndef bmFast +#define bmFast 3 // Fast boot +#endif + +// +// Matches MrcDdrType enum in MRC +// +#ifndef MRC_DDR_TYPE_DDR4 +#define MRC_DDR_TYPE_DDR4 0 +#endif +#ifndef MRC_DDR_TYPE_DDR3 +#define MRC_DDR_TYPE_DDR3 1 +#endif +#ifndef MRC_DDR_TYPE_LPDDR3 +#define MRC_DDR_TYPE_LPDDR3 2 +#endif +#ifndef CPU_CFL//CNL +#ifndef MRC_DDR_TYPE_LPDDR4 +#define MRC_DDR_TYPE_LPDDR4 3 +#endif +#else//CFL +#ifndef MRC_DDR_TYPE_UNKNOWN +#define MRC_DDR_TYPE_UNKNOWN 3 +#endif +#endif//CPU_CFL-endif + +#define MAX_PROFILE_NUM 4 // number of memory profiles supported +#define MAX_XMP_PROFILE_NUM 2 // number of XMP profiles supported + +// +// DIMM timings +// +typedef struct { + UINT32 tCK; ///< Memory cycle time, in femtoseconds. + UINT16 NMode; ///< Number of tCK cycles for the channel DIMM's command rate mode. + UINT16 tCL; ///< Number of tCK cycles for the channel DIMM's CAS latency. + UINT16 tCWL; ///< Number of tCK cycles for the channel DIMM's minimum CAS write latency time. + UINT16 tFAW; ///< Number of tCK cycles for the channel DIMM's minimum four activate window delay time. + UINT16 tRAS; ///< Number of tCK cycles for the channel DIMM's minimum active to precharge delay time. + UINT16 tRCDtRP; ///< Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time. + UINT16 tREFI; ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval. + UINT16 tRFC; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRFCpb; ///< Number of tCK cycles for the channel DIMM's minimum per bank refresh recovery delay time. + UINT16 tRFC2; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRFC4; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRPab; ///< Number of tCK cycles for the channel DIMM's minimum row precharge delay time for all banks. + UINT16 tRRD; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time. + UINT16 tRRD_L; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for same bank groups. + UINT16 tRRD_S; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for different bank groups. + UINT16 tRTP; ///< Number of tCK cycles for the channel DIMM's minimum internal read to precharge command delay time. + UINT16 tWR; ///< Number of tCK cycles for the channel DIMM's minimum write recovery time. + UINT16 tWTR; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time. + UINT16 tWTR_L; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups. + UINT16 tWTR_S; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups. + UINT16 tCCD_L; ///< Number of tCK cycles for the channel DIMM's minimum CAS-to-CAS delay for same bank group. +} MRC_CH_TIMING; + +typedef struct { + UINT8 SG; ///< Number of tCK cycles between transactions in the same bank group. + UINT8 DG; ///< Number of tCK cycles between transactions when switching bank groups. + UINT8 DR; ///< Number of tCK cycles between transactions when switching between Ranks (in the same DIMM). + UINT8 DD; ///< Number of tCK cycles between transactions when switching between DIMMs. +} MRC_TA_TIMING; + +/// +/// Memory SMBIOS & OC Memory Data Hob +/// +typedef struct { + UINT8 Status; ///< See MrcDimmStatus for the definition of this field. + UINT8 DimmId; + UINT32 DimmCapacity; ///< DIMM size in MBytes. + UINT16 MfgId; + UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes + UINT8 RankInDimm; ///< The number of ranks in this DIMM. + UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation. + UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation. + UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation. + UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation. + UINT16 Speed; ///< The maximum capable speed of the device, in MHz. +} DIMM_INFO; + +typedef struct { + UINT8 Status; ///< Indicates whether this channel should be used. + UINT8 ChannelId; + UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel. + MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values. + DIMM_INFO DimmInfo[MAX_DIMM]; ///< Save the DIMM output characteristics. + MRC_TA_TIMING tRd2Rd; ///< Read-to-Read Turn Around Timings + MRC_TA_TIMING tRd2Wr; ///< Read-to-Write Turn Around Timings + MRC_TA_TIMING tWr2Rd; ///< Write-to-Read Turn Around Timings + MRC_TA_TIMING tWr2Wr; ///< Write-to-Write Turn Around Timings +} CHANNEL_INFO; + +typedef struct { + UINT8 Status; ///< Indicates whether this controller should be used. + UINT16 DeviceId; ///< The PCI device id of this memory controller. + UINT8 RevisionId; ///< The PCI revision id of this memory controller. + UINT8 ChannelCount; ///< Number of valid channels that exist on the controller. + CHANNEL_INFO ChannelInfo[MAX_CH]; ///< The following are channel level definitions. + MRC_TA_TIMING tRd2Rd; ///< Deprecated and moved to CHANNEL_INFO. Read-to-Read Turn Around Timings + MRC_TA_TIMING tRd2Wr; ///< Deprecated and moved to CHANNEL_INFO. Read-to-Write Turn Around Timings + MRC_TA_TIMING tWr2Rd; ///< Deprecated and moved to CHANNEL_INFO. Write-to-Read Turn Around Timings + MRC_TA_TIMING tWr2Wr; ///< Deprecated and moved to CHANNEL_INFO. Write-to-Write Turn Around Timings +} CONTROLLER_INFO; + +typedef struct { + UINT8 Revision; + UINT16 DataWidth; ///< Data width, in bits, of this memory device + /** As defined in SMBIOS 3.0 spec + Section 7.18.2 and Table 75 + **/ + UINT8 MemoryType; ///< DDR type: DDR3, DDR4, or LPDDR3 + UINT16 MaximumMemoryClockSpeed;///< The maximum capable speed of the device, in megahertz (MHz) + UINT16 ConfiguredMemoryClockSpeed; ///< The configured clock speed to the memory device, in megahertz (MHz) + /** As defined in SMBIOS 3.0 spec + Section 7.17.3 and Table 72 + **/ + UINT8 ErrorCorrectionType; + + SiMrcVersion Version; + BOOLEAN EccSupport; + UINT8 MemoryProfile; + UINT32 TotalPhysicalMemorySize; + UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM];///< Stores the tCK value read from SPD XMP profiles if they exist. + UINT8 XmpProfileEnable; ///< If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs. + UINT8 Ratio; + UINT8 RefClk; + UINT32 VddVoltage[MAX_PROFILE_NUM]; + CONTROLLER_INFO Controller[MAX_NODE]; +} MEMORY_INFO_DATA_HOB; + +/** + Memory Platform Data Hob + + <b>Revision 1:</b> + - Initial version. + <b>Revision 2:</b> + - Added TsegBase, PrmrrSize, PrmrrBase, Gttbase, MmioSize, PciEBaseAddress fields +**/ +typedef struct { + UINT8 Revision; + UINT8 Reserved[3]; + UINT32 BootMode; + UINT32 TsegSize; + UINT32 TsegBase; + UINT32 PrmrrSize; + UINT32 PrmrrBase; + UINT32 GttBase; + UINT32 MmioSize; + UINT32 PciEBaseAddress; +#ifdef CPU_CFL + UINT32 GdxcIotBase; + UINT32 GdxcIotSize; + UINT32 GdxcMotBase; + UINT32 GdxcMotSize; +#endif //CPU_CFL +} MEMORY_PLATFORM_DATA; + +typedef struct { + EFI_HOB_GUID_TYPE EfiHobGuidType; + MEMORY_PLATFORM_DATA Data; + UINT8 *Buffer; +} MEMORY_PLATFORM_DATA_HOB; + +#pragma pack (pop) + +#endif // _MEM_INFO_HOB_H_
-
Subrata Banik (Code Review)