[S] Change in coreboot[main]: UPSTREAM: mb/google/nissa/var/rull: Add Elan touchscreen

[Rui Zhou (Code Review)]

Rui Zhou has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/85015?usp=email )

Change subject: UPSTREAM: mb/google/nissa/var/rull: Add Elan touchscreen
......................................................................

UPSTREAM: mb/google/nissa/var/rull: Add Elan touchscreen

Add Elan touchscreen override devicetree for rull based on the latest schematic
NB7559_MB_SCH_V1_2024_1010.pdf.

BUG=b:374629673
BRANCH=None
TEST=Local build successfully and touchpanel function is normal

Change-Id: Ie7f6dce0175c2940abfa14c4e407414912063112
Signed-off-by: Rui Zhou 
---
M src/mainboard/google/brya/variants/rull/overridetree.cb
1 file changed, 19 insertions(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/15/85015/1

diff --git a/src/mainboard/google/brya/variants/rull/overridetree.cb b/src/mainboard/google/brya/variants/rull/overridetree.cb
index b59a0de..963ebbc 100644
--- a/src/mainboard/google/brya/variants/rull/overridetree.cb
+++ b/src/mainboard/google/brya/variants/rull/overridetree.cb
@@ -219,7 +219,25 @@
    			device generic 0 on end
    		end
    	end
-		device ref i2c1 off end # Touchscreen
+		device ref i2c1 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ELAN9004""
+				register "generic.desc" = ""ELAN Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
+				register "generic.detect" = "1"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
+				register "generic.reset_delay_ms" = "20"
+				register "generic.reset_off_delay_ms" = "2"
+				register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
+				register "generic.stop_delay_ms" = "280"
+				register "generic.stop_off_delay_ms" = "2"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
+				register "generic.enable_delay_ms" = "1"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 10 on end
+			end
+		end
    	device ref i2c3 on
    		chip drivers/i2c/rt5645
    			register "hid" = ""10EC5650""