Change in libgfxinit[master]: gfx_test: Add rotation parameter

[Nico Huber (Code Review)]

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/22713

Change subject: gfx_test: Add rotation parameter
......................................................................

gfx_test: Add rotation parameter

Pass the requested rotation through to libgfxinit and enable Y tiling
in case of 90° rotations.

Change-Id: Icc4c4ee1ce43ecf1603cb673f1a10609494f757d
Signed-off-by: Nico Huber 
---
M gfxtest/gfx_test.sh
M gfxtest/hw-gfx-gma-gfx_test.adb
2 files changed, 44 insertions(+), 15 deletions(-)

git pull ssh://review.coreboot.org:29418/libgfxinit refs/changes/13/22713/1

diff --git a/gfxtest/gfx_test.sh b/gfxtest/gfx_test.sh
index 9df0005..0115443 100755
--- a/gfxtest/gfx_test.sh
+++ b/gfxtest/gfx_test.sh
@@ -2,7 +2,7 @@

set -e

-usage="Usage: $0 [seconds]\n"
+usage="Usage: $0 [<delay seconds> [(0|90|128|270)]]\n"

err_msgs=
 command -v chvt >/dev/null || err_msgs="${err_msgs}"'Need `chvt`\n'
@@ -13,7 +13,7 @@
 [ -x build/gfx_test ] || \
    err_msgs="${err_msgs}"'Please run from *libgfxinit* source dir and build `gfx_test` first.\n'

-[ "$#" -gt 1 ] && err_msgs="${err_msgs}${usage}"
+[ "$#" -gt 2 ] && err_msgs="${err_msgs}${usage}"

if [ -n "$err_msgs" ]; then
    printf "$err_msgs"
diff --git a/gfxtest/hw-gfx-gma-gfx_test.adb b/gfxtest/hw-gfx-gma-gfx_test.adb
index 4016664..e0ad71f 100644
--- a/gfxtest/hw-gfx-gma-gfx_test.adb
+++ b/gfxtest/hw-gfx-gma-gfx_test.adb
@@ -183,25 +183,38 @@
    procedure Calc_Framebuffer
      (FB       :    out Framebuffer_Type;
       Mode     : in     Mode_Type;
+      Rotation : in     Rotation_Type;
       Offset   : in out Word32)
    is
    begin
       Offset := (Offset + FB_Align - 1) and not (FB_Align - 1);
-      FB :=
-        (Width    => Width_Type (Mode.H_Visible),
-         Height   => Height_Type (Mode.V_Visible),
-         BPC      => 8,
-         Stride   => Width_Type ((Word32 (Mode.H_Visible) + 15) and not 15),
-         V_Stride => Height_Type (Mode.V_Visible),
-         Tiling   => Linear,
-         Rotation => No_Rotation,
-         Offset   => Offset);
+      if Rotation = Rotated_90 or Rotation = Rotated_270 then
+         FB :=
+           (Width    => Width_Type (Mode.V_Visible),
+            Height   => Height_Type (Mode.H_Visible),
+            BPC      => 8,
+            Stride   => Div_Round_Up (Pos32 (Mode.V_Visible), 32) * 32,
+            V_Stride => Div_Round_Up (Pos32 (Mode.H_Visible), 32) * 32,
+            Tiling   => Y_Tiled,
+            Rotation => Rotation,
+            Offset   => Offset);
+      else
+         FB :=
+           (Width    => Width_Type (Mode.H_Visible),
+            Height   => Width_Type (Mode.V_Visible),
+            BPC      => 8,
+            Stride   => Div_Round_Up (Pos32 (Mode.H_Visible), 16) * 16,
+            V_Stride => Height_Type (Mode.V_Visible),
+            Tiling   => Linear,
+            Rotation => Rotation,
+            Offset   => Offset);
+      end if;
       Offset := Offset + Word32 (FB_Size (FB));
    end Calc_Framebuffer;

Pipes : GMA.Pipe_Configs;

-   procedure Prepare_Configs
+   procedure Prepare_Configs (Rotation : Rotation_Type)
    is
       use type HW.GFX.GMA.Port_Type;

@@ -215,6 +228,7 @@
             Calc_Framebuffer
               (FB       => Pipes (Pipe).Framebuffer,
                Mode     => Pipes (Pipe).Mode,
+               Rotation => Rotation,
                Offset   => Offset);
             GMA.Setup_Default_FB
               (FB       => Pipes (Pipe).Framebuffer,
@@ -233,7 +247,9 @@
    is
    begin
       Debug.Put_Line
-        ("Usage: " & Ada.Command_Line.Command_Name & " <delay seconds>");
+        ("Usage: " & Ada.Command_Line.Command_Name &
+         " <delay seconds>" &
+         " [(0|90|180|270)]");
       Debug.New_Line;
    end Print_Usage;

@@ -246,6 +262,7 @@
       Res_Addr : Word64;

Delay_S : Natural;
+      Rotation : Rotation_Type := No_Rotation;

Dev_Init,
       Initialized : Boolean;
@@ -253,12 +270,24 @@
       function iopl (level : Interfaces.C.int) return Interfaces.C.int;
       pragma Import (C, iopl, "iopl");
    begin
-      if Ada.Command_Line.Argument_Count /= 1 then
+      if Ada.Command_Line.Argument_Count < 1 then
          Print_Usage;
          return;
       end if;

Delay_S := Natural'Value (Ada.Command_Line.Argument (1));
+
+      if Ada.Command_Line.Argument_Count >= 2 then
+         declare
+            Rotation_Degree : constant String := Ada.Command_Line.Argument (2);
+         begin
+            if    Rotation_Degree =   "0" then Rotation := No_Rotation;
+            elsif Rotation_Degree =  "90" then Rotation := Rotated_90;
+            elsif Rotation_Degree = "180" then Rotation := Rotated_180;
+            elsif Rotation_Degree = "270" then Rotation := Rotated_270;
+            else  Print_Usage; return; end if;
+         end;
+      end if;

if iopl (3) /= 0 then
          Debug.Put_Line ("Failed to change i/o privilege level.");
@@ -292,7 +321,7 @@
       if Initialized then
          Backup_GTT;

-         Prepare_Configs;
+         Prepare_Configs (Rotation);

GMA.Update_Outputs (Pipes);