Tim Wawrzynczak has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/34766 )
Change subject: mb/google/hatch: Kohaku: Add digitizer enable GPIO to device tree ......................................................................
mb/google/hatch: Kohaku: Add digitizer enable GPIO to device tree
The enable GPIOs for several devices were shuffled around, and this signal should now be used.
Change-Id: I9b0bd768cc8d9810fad6fd8a01f2a2635313008e Signed-off-by: Tim Wawrzynczak twawrzynczak@chromium.org --- M src/mainboard/google/hatch/variants/kohaku/overridetree.cb 1 file changed, 2 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/66/34766/1
diff --git a/src/mainboard/google/hatch/variants/kohaku/overridetree.cb b/src/mainboard/google/hatch/variants/kohaku/overridetree.cb index 31f6af2..fe5cff3 100644 --- a/src/mainboard/google/hatch/variants/kohaku/overridetree.cb +++ b/src/mainboard/google/hatch/variants/kohaku/overridetree.cb @@ -103,6 +103,8 @@ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A10)" register "generic.reset_delay_ms" = "1" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C15)" + register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" register "hid_desc_reg_offset" = "0x1" device i2c 0x09 on end
Paul Fagerburg has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/34766 )
Change subject: mb/google/hatch: Kohaku: Add digitizer enable GPIO to device tree ......................................................................
Patch Set 1: Code-Review+1
Furquan Shaikh has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/34766 )
Change subject: mb/google/hatch: Kohaku: Add digitizer enable GPIO to device tree ......................................................................
Patch Set 1:
(1 comment)
Why not squash this with the CL to enable stylus pen device?
https://review.coreboot.org/c/coreboot/+/34766/1/src/mainboard/google/hatch/... File src/mainboard/google/hatch/variants/kohaku/overridetree.cb:
https://review.coreboot.org/c/coreboot/+/34766/1/src/mainboard/google/hatch/... PS1, Line 107: "1" Didn't this create a problem? IIUC from the bug details, enable and reset need to go high at the same time. Shouldn't this delay be 0 in that case?
shkim has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/34766 )
Change subject: mb/google/hatch: Kohaku: Add digitizer enable GPIO to device tree ......................................................................
Patch Set 1:
Patch Set 1:
(1 comment)
Why not squash this with the CL to enable stylus pen device?
I think so - we can include this change into https://review.coreboot.org/c/coreboot/+/34581
Tim Wawrzynczak has abandoned this change. ( https://review.coreboot.org/c/coreboot/+/34766 )
Change subject: mb/google/hatch: Kohaku: Add digitizer enable GPIO to device tree ......................................................................
Abandoned