Tim Wawrzynczak has uploaded this change for review.

View Change

mb/google/hatch: Kohaku: Add digitizer enable GPIO to device tree

The enable GPIOs for several devices were shuffled around, and
this signal should now be used.

Change-Id: I9b0bd768cc8d9810fad6fd8a01f2a2635313008e
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
---
M src/mainboard/google/hatch/variants/kohaku/overridetree.cb
1 file changed, 2 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/66/34766/1

diff --git a/src/mainboard/google/hatch/variants/kohaku/overridetree.cb b/src/mainboard/google/hatch/variants/kohaku/overridetree.cb
index 31f6af2..fe5cff3 100644
--- a/src/mainboard/google/hatch/variants/kohaku/overridetree.cb
+++ b/src/mainboard/google/hatch/variants/kohaku/overridetree.cb
@@ -103,6 +103,8 @@
 				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
 				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A10)"
 				register "generic.reset_delay_ms" = "1"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C15)"
+				register "generic.enable_delay_ms" = "1"
 				register "generic.has_power_resource" = "1"
 				register "hid_desc_reg_offset" = "0x1"
 				device i2c 0x09 on end

To view, visit change 34766. To unsubscribe, or for help writing mail filters, visit settings.