Change in coreboot[master]: mb/kontron/bsl6: Configure GPIOs using mainboard_ops

[Michael Niewöhner (Code Review)]

Michael Niewöhner has submitted this change. ( https://review.coreboot.org/c/coreboot/+/47850 )

Change subject: mb/kontron/bsl6: Configure GPIOs using mainboard_ops
......................................................................

mb/kontron/bsl6: Configure GPIOs using mainboard_ops

Hook up the mainboard_ops driver and configure the GPIOs using .init,
since mainboard_silicon_init_params() is meant for the configuration of
the FSP, not the GPIOs.

Change-Id: I6ab8d258c6f81c90d835cb8d07c6387d3de76d85
Signed-off-by: Felix Singer 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47850
Reviewed-by: Michael Niewöhner 
Tested-by: build bot (Jenkins) 
---
M src/mainboard/kontron/bsl6/ramstage.c
1 file changed, 6 insertions(+), 2 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Michael Niewöhner: Looks good to me, approved

diff --git a/src/mainboard/kontron/bsl6/ramstage.c b/src/mainboard/kontron/bsl6/ramstage.c
index 19518f7..771c6aa 100644
--- a/src/mainboard/kontron/bsl6/ramstage.c
+++ b/src/mainboard/kontron/bsl6/ramstage.c
@@ -1,9 +1,13 @@
 /* SPDX-License-Identifier: GPL-2.0-only */

-#include <soc/ramstage.h>
+#include <device/device.h>
 #include <mainboard/gpio.h>

-void mainboard_silicon_init_params(FSP_SIL_UPD *params)
+static void init_mainboard(void *chip_info)
 {
    mainboard_configure_gpios();
 }
+
+struct chip_operations mainboard_ops = {
+	.init = init_mainboard,
+};