Jonathan Neuschäfer has uploaded this change for review. ( https://review.coreboot.org/23706
Change subject: src/soc: Fix various typos ......................................................................
src/soc: Fix various typos
These typos were found through manual review and grep.
Change-Id: I6693a9e3b51256b91342881a7116587f68ee96e6 Signed-off-by: Jonathan Neuschäfer j.neuschaefer@gmx.net --- M src/soc/amd/stoneyridge/include/soc/northbridge.h M src/soc/amd/stoneyridge/southbridge.c M src/soc/broadcom/cygnus/hw_init.c M src/soc/broadcom/cygnus/include/soc/shmoo_and28/phy_and28_e2.h M src/soc/imgtec/pistachio/ddr2_init.c M src/soc/imgtec/pistachio/ddr3_init.c M src/soc/intel/apollolake/include/soc/meminit.h M src/soc/intel/apollolake/meminit.c M src/soc/intel/apollolake/romstage.c M src/soc/intel/apollolake/systemagent.c M src/soc/intel/cannonlake/include/soc/bootblock.h M src/soc/intel/cannonlake/include/soc/vr_config.h M src/soc/intel/cannonlake/romstage/systemagent.c M src/soc/intel/cannonlake/systemagent.c M src/soc/intel/common/block/cpu/car/cache_as_ram.S M src/soc/intel/common/block/cse/cse.c M src/soc/intel/common/block/graphics/graphics.c M src/soc/intel/common/block/include/intelblocks/acpi.h M src/soc/intel/common/block/include/intelblocks/lpc_lib.h M src/soc/intel/common/block/include/intelblocks/pmclib.h M src/soc/intel/common/block/include/intelblocks/systemagent.h M src/soc/intel/common/block/pcr/pcr.c M src/soc/intel/common/block/pmc/pmclib.c M src/soc/intel/common/block/sgx/Kconfig M src/soc/intel/common/block/sgx/sgx.c M src/soc/intel/common/block/systemagent/systemagent_def.h M src/soc/intel/common/block/uart/uart.c M src/soc/intel/denverton_ns/bootblock/uart.c M src/soc/intel/denverton_ns/csme_ie_kt.c M src/soc/intel/denverton_ns/gpio.c M src/soc/intel/denverton_ns/include/soc/bootblock.h M src/soc/intel/denverton_ns/include/soc/gpio_defs.h M src/soc/intel/denverton_ns/include/soc/smm.h M src/soc/intel/denverton_ns/lpc.c M src/soc/intel/skylake/include/soc/bootblock.h M src/soc/intel/skylake/include/soc/vr_config.h M src/soc/intel/skylake/irq.c M src/soc/intel/skylake/memmap.c M src/soc/intel/skylake/romstage/systemagent.c M src/soc/intel/skylake/systemagent.c M src/soc/marvell/mvmap2315/pmic.c M src/soc/nvidia/tegra210/romstage.c M src/soc/qualcomm/ipq40xx/blobs_init.c M src/soc/qualcomm/ipq806x/blobs_init.c 44 files changed, 82 insertions(+), 82 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/06/23706/1
diff --git a/src/soc/amd/stoneyridge/include/soc/northbridge.h b/src/soc/amd/stoneyridge/include/soc/northbridge.h index b0bbd54..d649ada 100644 --- a/src/soc/amd/stoneyridge/include/soc/northbridge.h +++ b/src/soc/amd/stoneyridge/include/soc/northbridge.h @@ -80,7 +80,7 @@ void smm_region_info(void **start, size_t *size); /* * Fills in the start and size for the requested SMM subregion. Returns - * 0 on susccess, < 0 on failure. + * 0 on success, < 0 on failure. */ int smm_subregion(int sub, void **start, size_t *size); void domain_enable_resources(device_t dev); diff --git a/src/soc/amd/stoneyridge/southbridge.c b/src/soc/amd/stoneyridge/southbridge.c index 735642f..100d4e6 100644 --- a/src/soc/amd/stoneyridge/southbridge.c +++ b/src/soc/amd/stoneyridge/southbridge.c @@ -75,7 +75,7 @@
/* * Table of APIC register index and associated IRQ name. Using IDX_XXX_NAME - * provides a visible association with the index, therefor helping + * provides a visible association with the index, therefore helping * maintainability of table. If a new index/name is defined in * amd_pci_int_defs.h, just add the pair at the end of this table. * Order is not important. diff --git a/src/soc/broadcom/cygnus/hw_init.c b/src/soc/broadcom/cygnus/hw_init.c index b9e5857..ce5592f 100644 --- a/src/soc/broadcom/cygnus/hw_init.c +++ b/src/soc/broadcom/cygnus/hw_init.c @@ -106,7 +106,7 @@ * * NOTE: In the future, we might want to protect particular CRMU * sub-blocks to allow SECURE access only. That can be done by - * programing the CRMU IPROC address range registers. Up to 4 access + * programming the CRMU IPROC address range registers. Up to 4 access * windows can be created */ write32((void *)CRMU_IPROC_ADDR_RANGE0_LOW, diff --git a/src/soc/broadcom/cygnus/include/soc/shmoo_and28/phy_and28_e2.h b/src/soc/broadcom/cygnus/include/soc/shmoo_and28/phy_and28_e2.h index 166cc0b..93489bb 100644 --- a/src/soc/broadcom/cygnus/include/soc/shmoo_and28/phy_and28_e2.h +++ b/src/soc/broadcom/cygnus/include/soc/shmoo_and28/phy_and28_e2.h @@ -218,7 +218,7 @@ #define DDR34_CORE_PHY_BYTE_LANE_0_RD_EN_DLY_CYC 0x000004a0 /* Read enable bit-clock cycle delay control register */ #define DDR34_CORE_PHY_BYTE_LANE_0_WR_CHAN_DLY_CYC 0x000004a4 /* Write leveling bit-clock cycle delay control register */ #define DDR34_CORE_PHY_BYTE_LANE_0_READ_CONTROL 0x000004b0 /* Read channel datapath control register */ -#define DDR34_CORE_PHY_BYTE_LANE_0_READ_FIFO_ADDR 0x000004b4 /* Read fifo addresss pointer register */ +#define DDR34_CORE_PHY_BYTE_LANE_0_READ_FIFO_ADDR 0x000004b4 /* Read fifo address pointer register */ #define DDR34_CORE_PHY_BYTE_LANE_0_READ_FIFO_DATA 0x000004b8 /* Read fifo data register */ #define DDR34_CORE_PHY_BYTE_LANE_0_READ_FIFO_DM_DBI 0x000004bc /* Read fifo dm/dbi register */ #define DDR34_CORE_PHY_BYTE_LANE_0_READ_FIFO_STATUS 0x000004c0 /* Read fifo status register */ @@ -284,7 +284,7 @@ #define DDR34_CORE_PHY_BYTE_LANE_1_RD_EN_DLY_CYC 0x000006a0 /* Read enable bit-clock cycle delay control register */ #define DDR34_CORE_PHY_BYTE_LANE_1_WR_CHAN_DLY_CYC 0x000006a4 /* Write leveling bit-clock cycle delay control register */ #define DDR34_CORE_PHY_BYTE_LANE_1_READ_CONTROL 0x000006b0 /* Read channel datapath control register */ -#define DDR34_CORE_PHY_BYTE_LANE_1_READ_FIFO_ADDR 0x000006b4 /* Read fifo addresss pointer register */ +#define DDR34_CORE_PHY_BYTE_LANE_1_READ_FIFO_ADDR 0x000006b4 /* Read fifo address pointer register */ #define DDR34_CORE_PHY_BYTE_LANE_1_READ_FIFO_DATA 0x000006b8 /* Read fifo data register */ #define DDR34_CORE_PHY_BYTE_LANE_1_READ_FIFO_DM_DBI 0x000006bc /* Read fifo dm/dbi register */ #define DDR34_CORE_PHY_BYTE_LANE_1_READ_FIFO_STATUS 0x000006c0 /* Read fifo status register */ @@ -7729,7 +7729,7 @@ #define DDR34_CORE_PHY_BYTE_LANE_0_READ_CONTROL_RD_DATA_DLY_DEFAULT 0x00000007
/*************************************************************************** - *READ_FIFO_ADDR - Read fifo addresss pointer register + *READ_FIFO_ADDR - Read fifo address pointer register ***************************************************************************/ /* DDR34_CORE_PHY_BYTE_LANE_0 :: READ_FIFO_ADDR :: reserved0 [31:03] */ #define DDR34_CORE_PHY_BYTE_LANE_0_READ_FIFO_ADDR_reserved0_MASK 0xfffffff8 @@ -10483,7 +10483,7 @@ #define DDR34_CORE_PHY_BYTE_LANE_1_READ_CONTROL_RD_DATA_DLY_DEFAULT 0x00000007
/*************************************************************************** - *READ_FIFO_ADDR - Read fifo addresss pointer register + *READ_FIFO_ADDR - Read fifo address pointer register ***************************************************************************/ /* DDR34_CORE_PHY_BYTE_LANE_1 :: READ_FIFO_ADDR :: reserved0 [31:03] */ #define DDR34_CORE_PHY_BYTE_LANE_1_READ_FIFO_ADDR_reserved0_MASK 0xfffffff8 diff --git a/src/soc/imgtec/pistachio/ddr2_init.c b/src/soc/imgtec/pistachio/ddr2_init.c index 9549537..aac85a9 100644 --- a/src/soc/imgtec/pistachio/ddr2_init.c +++ b/src/soc/imgtec/pistachio/ddr2_init.c @@ -288,7 +288,7 @@ */ write32(DDR_PCTL + DDR_PCTL_TRAS_OFFSET, 0x00000012); /* - * TRC : Min. ROW cylce time + * TRC : Min. ROW cycle time * Range 11 to 31: 57.5ns / 2.5ns = 23d Playing safe 24 */ write32(DDR_PCTL + DDR_PCTL_TRC_OFFSET, 0x00000018); diff --git a/src/soc/imgtec/pistachio/ddr3_init.c b/src/soc/imgtec/pistachio/ddr3_init.c index 5cb36a0..b3f723c 100644 --- a/src/soc/imgtec/pistachio/ddr3_init.c +++ b/src/soc/imgtec/pistachio/ddr3_init.c @@ -303,7 +303,7 @@ write32(DDR_PCTL + DDR_PCTL_TCWL_OFFSET, 0x00000005); /* TRAS : Activate to Precharge cmd time 15 45ns / 2.5ns = 18d */ write32(DDR_PCTL + DDR_PCTL_TRAS_OFFSET, 0x0000000F); - /* TRC : Min. ROW cylce time 21 + /* TRC : Min. ROW cycle time 21 * 57.5ns / 2.5ns = 23d Playing safe 24 */ write32(DDR_PCTL + DDR_PCTL_TRC_OFFSET, 0x00000015); @@ -428,7 +428,7 @@ */ write32(DDR_PCTL + DDR_PCTL_DFIODTCFG1_OFFSET, 0x060600000);
- /* Memory initilization */ + /* Memory initialization */ /* MCMD : PREA, Addr 0 Bank 0 Rank 0 Del 0 * 3:0 cmd_opcode PREA 00001 * 16:4 cmd_addr 0 diff --git a/src/soc/intel/apollolake/include/soc/meminit.h b/src/soc/intel/apollolake/include/soc/meminit.h index 339d2b1..fa12728 100644 --- a/src/soc/intel/apollolake/include/soc/meminit.h +++ b/src/soc/intel/apollolake/include/soc/meminit.h @@ -76,7 +76,7 @@ * and LOW for ODT_B, choose ODT_AB_HIGH_LOW. * * Note that the enum values correspond to the interpreted UPD fields - * witihn Ch[3:0]_OdtConfig parameters. + * within Ch[3:0]_OdtConfig parameters. */ enum { ODT_A_B_HIGH_LOW = 0 << 1, diff --git a/src/soc/intel/apollolake/meminit.c b/src/soc/intel/apollolake/meminit.c index 91cdeb5..dd8b591 100644 --- a/src/soc/intel/apollolake/meminit.c +++ b/src/soc/intel/apollolake/meminit.c @@ -130,10 +130,10 @@ /* * CH0_DQB byte lanes in the bit swizzle configuration field are * not 1:1. The mapping within the swizzling field is: - * indicies [0:7] - byte lane 1 (DQS1) DQ[8:15] - * indicies [8:15] - byte lane 0 (DQS0) DQ[0:7] - * indicies [16:23] - byte lane 3 (DQS3) DQ[24:31] - * indicies [24:31] - byte lane 2 (DQS2) DQ[16:23] + * indices [0:7] - byte lane 1 (DQS1) DQ[8:15] + * indices [8:15] - byte lane 0 (DQS0) DQ[0:7] + * indices [16:23] - byte lane 3 (DQS3) DQ[24:31] + * indices [24:31] - byte lane 2 (DQS2) DQ[16:23] */ chan = &scfg->phys[LP4_PHYS_CH0B]; memcpy(&cfg->Ch0_Bit_swizzling[0], &chan->dqs[LP4_DQS1], sz); @@ -175,10 +175,10 @@ /* * CH1_DQB byte lanes in the bit swizzle configuration field are * not 1:1. The mapping within the swizzling field is: - * indicies [0:7] - byte lane 1 (DQS1) DQ[8:15] - * indicies [8:15] - byte lane 0 (DQS0) DQ[0:7] - * indicies [16:23] - byte lane 3 (DQS3) DQ[24:31] - * indicies [24:31] - byte lane 2 (DQS2) DQ[16:23] + * indices [0:7] - byte lane 1 (DQS1) DQ[8:15] + * indices [8:15] - byte lane 0 (DQS0) DQ[0:7] + * indices [16:23] - byte lane 3 (DQS3) DQ[24:31] + * indices [24:31] - byte lane 2 (DQS2) DQ[16:23] */ chan = &scfg->phys[LP4_PHYS_CH1B]; memcpy(&cfg->Ch2_Bit_swizzling[0], &chan->dqs[LP4_DQS1], sz); diff --git a/src/soc/intel/apollolake/romstage.c b/src/soc/intel/apollolake/romstage.c index 20b67fd..1db2982 100644 --- a/src/soc/intel/apollolake/romstage.c +++ b/src/soc/intel/apollolake/romstage.c @@ -87,7 +87,7 @@ { MCHBAR, MCH_BASE_ADDRESS, MCH_BASE_SIZE, "MCHBAR" }, };
- /* Set Fixed MMIO addresss into PCI configuration space */ + /* Set Fixed MMIO address into PCI configuration space */ sa_set_pci_bar(soc_fixed_pci_resources, ARRAY_SIZE(soc_fixed_pci_resources));
diff --git a/src/soc/intel/apollolake/systemagent.c b/src/soc/intel/apollolake/systemagent.c index 57de4b8..c8f1330 100644 --- a/src/soc/intel/apollolake/systemagent.c +++ b/src/soc/intel/apollolake/systemagent.c @@ -27,7 +27,7 @@ /* * SoC implementation * - * Add all known fixed memory ranges for Host Controller/Mmeory + * Add all known fixed memory ranges for Host Controller/Memory * controller. */ void soc_add_fixed_mmio_resources(struct device *dev, int *index) diff --git a/src/soc/intel/cannonlake/include/soc/bootblock.h b/src/soc/intel/cannonlake/include/soc/bootblock.h index 2a6ca1f..a5c3c32 100644 --- a/src/soc/intel/cannonlake/include/soc/bootblock.h +++ b/src/soc/intel/cannonlake/include/soc/bootblock.h @@ -18,11 +18,11 @@
#include <intelblocks/systemagent.h>
-/* Bootblock pre console init programing */ +/* Bootblock pre console init programming */ void bootblock_cpu_init(void); void bootblock_pch_early_init(void);
-/* Bootblock post console init programing */ +/* Bootblock post console init programming */ void pch_early_init(void); void pch_early_iorange_init(void); void report_platform_info(void); diff --git a/src/soc/intel/cannonlake/include/soc/vr_config.h b/src/soc/intel/cannonlake/include/soc/vr_config.h index 2cd7dd9..385767d 100644 --- a/src/soc/intel/cannonlake/include/soc/vr_config.h +++ b/src/soc/intel/cannonlake/include/soc/vr_config.h @@ -26,7 +26,7 @@ * for that domain. */ uint8_t vr_config_enable;
- /* Power State X current cuttof in 1/4 Amp increments + /* Power State X current cutoff in 1/4 Amp increments * Range is 0-128A */ uint16_t psi1threshold; uint16_t psi2threshold; diff --git a/src/soc/intel/cannonlake/romstage/systemagent.c b/src/soc/intel/cannonlake/romstage/systemagent.c index f7c7f1a..61db22e 100644 --- a/src/soc/intel/cannonlake/romstage/systemagent.c +++ b/src/soc/intel/cannonlake/romstage/systemagent.c @@ -34,12 +34,12 @@ { EDRAMBAR, EDRAM_BASE_ADDRESS, EDRAM_BASE_SIZE, "EDRAMBAR" }, };
- /* Set Fixed MMIO addresss into PCI configuration space */ + /* Set Fixed MMIO address into PCI configuration space */ sa_set_pci_bar(soc_fixed_pci_resources, ARRAY_SIZE(soc_fixed_pci_resources)); - /* Set Fixed MMIO addresss into MCH base address */ + /* Set Fixed MMIO address into MCH base address */ sa_set_mch_bar(soc_fixed_mch_resources, ARRAY_SIZE(soc_fixed_mch_resources)); - /* Enable PAM regisers */ + /* Enable PAM registers */ enable_pam_region(); } diff --git a/src/soc/intel/cannonlake/systemagent.c b/src/soc/intel/cannonlake/systemagent.c index 344517d..06b37e0 100644 --- a/src/soc/intel/cannonlake/systemagent.c +++ b/src/soc/intel/cannonlake/systemagent.c @@ -25,7 +25,7 @@ /* * SoC implementation * - * Add all known fixed memory ranges for Host Controller/Mmeory + * Add all known fixed memory ranges for Host Controller/Memory * controller. */ void soc_add_fixed_mmio_resources(struct device *dev, int *index) diff --git a/src/soc/intel/common/block/cpu/car/cache_as_ram.S b/src/soc/intel/common/block/cpu/car/cache_as_ram.S index 1798de5..02aeefe 100644 --- a/src/soc/intel/common/block/cpu/car/cache_as_ram.S +++ b/src/soc/intel/common/block/cpu/car/cache_as_ram.S @@ -389,7 +389,7 @@ * Maximizing RO cacheability while locking in the CAR to a * single way since that particular way won't be victim candidate * for evictions. - * This has been done after programing LLC_WAY_MASK_1 MSR + * This has been done after programming LLC_WAY_MASK_1 MSR * with desired LLC way as mentioned below. * * Hence create Code and Data Size as per request diff --git a/src/soc/intel/common/block/cse/cse.c b/src/soc/intel/common/block/cse/cse.c index 0ff999e..4991db6 100644 --- a/src/soc/intel/common/block/cse/cse.c +++ b/src/soc/intel/common/block/cse/cse.c @@ -31,7 +31,7 @@
/* Wait up to 15 sec for HECI to get ready */ #define HECI_DELAY_READY (15 * 1000) -/* Wait up to 100 usec between circullar buffer polls */ +/* Wait up to 100 usec between circular buffer polls */ #define HECI_DELAY 100 /* Wait up to 5 sec for CSE to chew something we sent */ #define HECI_SEND_TIMEOUT (5 * 1000) @@ -126,7 +126,7 @@ static uint32_t read_bar(uint32_t offset) { struct cse_device *cse = car_get_var_ptr(&g_cse); - /* Reach PCI config space to get BAR incase CAR global not available */ + /* Reach PCI config space to get BAR in case CAR global not available */ if (!cse->sec_bar) cse->sec_bar = get_cse_bar(); return read32((void *)(cse->sec_bar + offset)); @@ -135,7 +135,7 @@ static void write_bar(uint32_t offset, uint32_t val) { struct cse_device *cse = car_get_var_ptr(&g_cse); - /* Reach PCI config space to get BAR incase CAR global not available */ + /* Reach PCI config space to get BAR in case CAR global not available */ if (!cse->sec_bar) cse->sec_bar = get_cse_bar(); return write32((void *)(cse->sec_bar + offset), val); @@ -341,7 +341,7 @@
/* * Fragment the message into smaller messages not exceeding - * useful circullar buffer length. Mark last message complete. + * useful circular buffer length. Mark last message complete. */ do { hdr = MIN(max_length, remaining) diff --git a/src/soc/intel/common/block/graphics/graphics.c b/src/soc/intel/common/block/graphics/graphics.c index 5b2527c..dcf8200 100644 --- a/src/soc/intel/common/block/graphics/graphics.c +++ b/src/soc/intel/common/block/graphics/graphics.c @@ -24,7 +24,7 @@ __attribute__((weak)) void graphics_soc_init(struct device *dev) { /* - * User needs to implement SoC override incase wishes + * User needs to implement SoC override in case wishes * to perform certain specific graphics initialization * along with pci_dev_init(dev) */ diff --git a/src/soc/intel/common/block/include/intelblocks/acpi.h b/src/soc/intel/common/block/include/intelblocks/acpi.h index 73a9c9c..927da3c 100644 --- a/src/soc/intel/common/block/include/intelblocks/acpi.h +++ b/src/soc/intel/common/block/include/intelblocks/acpi.h @@ -44,7 +44,7 @@ struct acpi_rsdp *rsdp);
/* - * Craetes acpi gnvs and adds it to the DSDT table. + * Creates acpi gnvs and adds it to the DSDT table. * GNVS creation is chipset specific and is done in soc specific acpi.c file. */ void southbridge_inject_dsdt(device_t device); @@ -84,7 +84,7 @@ /* * soc specific power states generation. We need this to be defined by soc * as the state generations varies in chipsets e.g. APL generates T and P - * states while SKL generates * P state only depening on a devicetree config + * states while SKL generates * P state only depending on a devicetree config */ void soc_power_states_generation(int core_id, int cores_per_package);
diff --git a/src/soc/intel/common/block/include/intelblocks/lpc_lib.h b/src/soc/intel/common/block/include/intelblocks/lpc_lib.h index 554c75d..7269bef 100644 --- a/src/soc/intel/common/block/include/intelblocks/lpc_lib.h +++ b/src/soc/intel/common/block/include/intelblocks/lpc_lib.h @@ -69,14 +69,14 @@ void lpc_open_mmio_window(uintptr_t base, size_t size); /* Returns true if given window is decoded to LPC via a fixed range. */ bool lpc_fits_fixed_mmio_window(uintptr_t base, size_t size); -/* Init SoC Spcific LPC features. Common definition will be weak and +/* Init SoC Specific LPC features. Common definition will be weak and each soc will need to define the init. */ void lpc_soc_init(struct device *dev); /* Fill up LPC IO resource structure inside SoC directory */ void pch_lpc_soc_fill_io_resources(struct device *dev); /* Init LPC GPIO pads */ void lpc_configure_pads(void); -/* Get SoC speicific MMIO ranges */ +/* Get SoC specific MMIO ranges */ const struct lpc_mmio_range *soc_get_fixed_mmio_ranges(void); /* Set LPC BIOS Control BILD bit. */ void lpc_set_bios_interface_lock_down(void); @@ -97,7 +97,7 @@ void lpc_io_setup_comm_a_b(void); /* Enable PCH LPC by setting up generic decode range registers. */ void pch_enable_lpc(void); -/* Retrieve and setup SoC speicific PCH LPC interrupt routing. */ +/* Retrieve and setup SoC specific PCH LPC interrupt routing. */ void soc_pch_pirq_init(const struct device *dev); /* Get SoC's generic IO decoder range register settings. */ void soc_get_gen_io_dec_range(const struct device *dev, diff --git a/src/soc/intel/common/block/include/intelblocks/pmclib.h b/src/soc/intel/common/block/include/intelblocks/pmclib.h index 3827cf5..d631f01 100644 --- a/src/soc/intel/common/block/include/intelblocks/pmclib.h +++ b/src/soc/intel/common/block/include/intelblocks/pmclib.h @@ -37,7 +37,7 @@ /* * This function is specific to soc and is defined as weak in common * pmclib file. SOC code can implement it for any special condition - * specific to the soc e.g. in SKL in handles deep S3 scenerio. + * specific to the soc e.g. in SKL in handles deep S3 scenario. * Return ACPI_SX values to indicate the previous sleep state. */ int soc_prev_sleep_state(const struct chipset_power_state *ps, @@ -206,7 +206,7 @@ void soc_get_gpi_gpe_configs(uint8_t *dw0, uint8_t *dw1, uint8_t *dw2);
/* - * Reads soc specific power management crtitical registers, fills + * Reads soc specific power management critical registers, fills * chipset_power_state structure variable and prints. */ void soc_fill_power_state(struct chipset_power_state *ps); diff --git a/src/soc/intel/common/block/include/intelblocks/systemagent.h b/src/soc/intel/common/block/include/intelblocks/systemagent.h index 64b2c36..a731b9c 100644 --- a/src/soc/intel/common/block/include/intelblocks/systemagent.h +++ b/src/soc/intel/common/block/include/intelblocks/systemagent.h @@ -52,10 +52,10 @@ const char *description; };
-/* API to set Fixed MMIO addresss into PCI configuration space */ +/* API to set Fixed MMIO address into PCI configuration space */ void sa_set_pci_bar(const struct sa_mmio_descriptor *fixed_set_resources, size_t count); -/* API to set Fixed MMIO addresss into MCH base address */ +/* API to set Fixed MMIO address into MCH base address */ void sa_set_mch_bar(const struct sa_mmio_descriptor *fixed_set_resources, size_t count); /* @@ -69,7 +69,7 @@ * SoC to provide BIOS_RESET_CPL register offset through soc/systemagent.h */ void enable_bios_reset_cpl(void); -/* API to enable PAM regisers */ +/* API to enable PAM registers */ void enable_pam_region(void); /* API to enable Power Aware Interrupt Routing through MCHBAR */ void enable_power_aware_intr(void); diff --git a/src/soc/intel/common/block/pcr/pcr.c b/src/soc/intel/common/block/pcr/pcr.c index 4264cdf..e106c41 100644 --- a/src/soc/intel/common/block/pcr/pcr.c +++ b/src/soc/intel/common/block/pcr/pcr.c @@ -59,7 +59,7 @@
uint32_t pcr_read32(uint8_t pid, uint16_t offset) { - /* Ensure the PCR offset is corretcly aligned. */ + /* Ensure the PCR offset is correctly aligned. */ assert(IS_ALIGNED(offset, sizeof(uint32_t)));
return read32(__pcr_reg_address(pid, offset)); @@ -67,7 +67,7 @@
uint16_t pcr_read16(uint8_t pid, uint16_t offset) { - /* Ensure the PCR offset is corretcly aligned. */ + /* Ensure the PCR offset is correctly aligned. */ check_pcr_offset_align(offset, sizeof(uint16_t));
return read16(__pcr_reg_address(pid, offset)); @@ -75,7 +75,7 @@
uint8_t pcr_read8(uint8_t pid, uint16_t offset) { - /* Ensure the PCR offset is corretcly aligned. */ + /* Ensure the PCR offset is correctly aligned. */ check_pcr_offset_align(offset, sizeof(uint8_t));
return read8(__pcr_reg_address(pid, offset)); @@ -94,7 +94,7 @@
void pcr_write32(uint8_t pid, uint16_t offset, uint32_t indata) { - /* Ensure the PCR offset is corretcly aligned. */ + /* Ensure the PCR offset is correctly aligned. */ assert(IS_ALIGNED(offset, sizeof(indata)));
write32(__pcr_reg_address(pid, offset), indata); @@ -104,7 +104,7 @@
void pcr_write16(uint8_t pid, uint16_t offset, uint16_t indata) { - /* Ensure the PCR offset is corretcly aligned. */ + /* Ensure the PCR offset is correctly aligned. */ check_pcr_offset_align(offset, sizeof(uint16_t));
write16(__pcr_reg_address(pid, offset), indata); @@ -114,7 +114,7 @@
void pcr_write8(uint8_t pid, uint16_t offset, uint8_t indata) { - /* Ensure the PCR offset is corretcly aligned. */ + /* Ensure the PCR offset is correctly aligned. */ check_pcr_offset_align(offset, sizeof(uint8_t));
write8(__pcr_reg_address(pid, offset), indata); diff --git a/src/soc/intel/common/block/pmc/pmclib.c b/src/soc/intel/common/block/pmc/pmclib.c index dea7e1b..cf87d05 100644 --- a/src/soc/intel/common/block/pmc/pmclib.c +++ b/src/soc/intel/common/block/pmc/pmclib.c @@ -360,7 +360,7 @@
/* * Returns prev_sleep_state and also prints all power management registers. - * Calls soc_prev_sleep_state which may be impelmented by SOC. + * Calls soc_prev_sleep_state which may be implemented by SOC. */ static int pmc_prev_sleep_state(const struct chipset_power_state *ps) { diff --git a/src/soc/intel/common/block/sgx/Kconfig b/src/soc/intel/common/block/sgx/Kconfig index 7889582..0852bfb 100644 --- a/src/soc/intel/common/block/sgx/Kconfig +++ b/src/soc/intel/common/block/sgx/Kconfig @@ -3,5 +3,5 @@ default n help Software Guard eXtension(SGX) Feature. Intel SGX is a set of new CPU - instructions that can be used by applications to set aside privat + instructions that can be used by applications to set aside private regions of code and data. diff --git a/src/soc/intel/common/block/sgx/sgx.c b/src/soc/intel/common/block/sgx/sgx.c index 86789fa..d3be15c 100644 --- a/src/soc/intel/common/block/sgx/sgx.c +++ b/src/soc/intel/common/block/sgx/sgx.c @@ -193,11 +193,11 @@ msr_t msr; msr = rdmsr(PRMRR_PHYS_MASK_MSR); if (msr.lo & PRMRR_PHYS_MASK_VALID) { - printk(BIOS_INFO, "SGX: MCHECK aprroved SGX PRMRR\n"); + printk(BIOS_INFO, "SGX: MCHECK approved SGX PRMRR\n"); return 1; }
- printk(BIOS_INFO, "SGX: MCHECK did not aprrove SGX PRMRR\n"); + printk(BIOS_INFO, "SGX: MCHECK did not approve SGX PRMRR\n"); return 0; }
@@ -226,7 +226,7 @@ /* Lock the SGX feature */ lock_sgx();
- /* Activate the SGX feature, if PRMRR config was aprroved by MCHECK */ + /* Activate the SGX feature, if PRMRR config was approved by MCHECK */ if (is_prmrr_approved()) activate_sgx(); } diff --git a/src/soc/intel/common/block/systemagent/systemagent_def.h b/src/soc/intel/common/block/systemagent/systemagent_def.h index e028692..b89a10d 100644 --- a/src/soc/intel/common/block/systemagent/systemagent_def.h +++ b/src/soc/intel/common/block/systemagent/systemagent_def.h @@ -19,13 +19,13 @@
/* Device 0:0.0 PCI configuration space */
-/* GMCH Graphics Comntrol Register */ +/* GMCH Graphics Control Register */ #define GGC 0x50 #define G_GMS_OFFSET 0x8 #define G_GMS_MASK 0xff00 #define G_GGMS_OFFSET 0x6 #define G_GGMS_MASK 0xc0 -/* DPR register incase CONFIG_SA_ENABLE_DPR is selected by SoC */ +/* DPR register in case CONFIG_SA_ENABLE_DPR is selected by SoC */ #define DPR 0x5c #define DPR_EPM (1 << 2) #define DPR_PRS (1 << 1) @@ -48,7 +48,7 @@ #define MCH_PAIR 0x5418
/* - * IMR register incase CONFIG_SA_ENABLE_IMR is selected by SoC. + * IMR register in case CONFIG_SA_ENABLE_IMR is selected by SoC. * * IMR registers are found under MCHBAR. */ diff --git a/src/soc/intel/common/block/uart/uart.c b/src/soc/intel/common/block/uart/uart.c index 91badc7..9f26ef1 100644 --- a/src/soc/intel/common/block/uart/uart.c +++ b/src/soc/intel/common/block/uart/uart.c @@ -106,7 +106,7 @@ static bool uart_controller_needs_init(struct device *dev) { /* - * If coreboot has CONSOLE_SERIAL enabled, the skip re-initalizing + * If coreboot has CONSOLE_SERIAL enabled, the skip re-initializing * controller here. */ if (IS_ENABLED(CONFIG_CONSOLE_SERIAL)) diff --git a/src/soc/intel/denverton_ns/bootblock/uart.c b/src/soc/intel/denverton_ns/bootblock/uart.c index a81b389..affddba 100644 --- a/src/soc/intel/denverton_ns/bootblock/uart.c +++ b/src/soc/intel/denverton_ns/bootblock/uart.c @@ -185,7 +185,7 @@ { register int i;
- /* Check: do we have enought elements to init. ? */ + /* Check: do we have enough elements to init. ? */ BUILD_BUG_ON(DENVERTON_UARTS_TO_INI > ELEM_OF_UART_TAB);
/* HSUART(B0:D26:0-1) GPIO init. */ diff --git a/src/soc/intel/denverton_ns/csme_ie_kt.c b/src/soc/intel/denverton_ns/csme_ie_kt.c index 7848883..7de0976 100644 --- a/src/soc/intel/denverton_ns/csme_ie_kt.c +++ b/src/soc/intel/denverton_ns/csme_ie_kt.c @@ -38,7 +38,7 @@ struct resource *resource; resource = pci_get_resource(dev, index); /** - * Workarond for Denverton-NS silicon (Rev A0/A1 for CSME/IE, + * Workaround for Denverton-NS silicon (Rev A0/A1 for CSME/IE, * Rev B0 for CSME only) * CSME&IEs KT IO bar must be 16-byte aligned */ @@ -59,7 +59,7 @@ static void pci_csme_ie_kt_read_resources(device_t dev) { /** - * CSME/IE KT has 2 BARs to chec: + * CSME/IE KT has 2 BARs to check: * 0x10 - KT IO BAR * 0x14 - KT Memory BAR * CSME/IE KT has no Expansion ROM BAR to check: diff --git a/src/soc/intel/denverton_ns/gpio.c b/src/soc/intel/denverton_ns/gpio.c index 3030fbb..1921b13 100644 --- a/src/soc/intel/denverton_ns/gpio.c +++ b/src/soc/intel/denverton_ns/gpio.c @@ -284,7 +284,7 @@ (GPIO_CONF_INT_ROUTE_BIT_POS + 1)) << N_PCH_GPIO_RX_NMI_ROUTE);
- // If CFIO is not Working as GPIO mode, Don't move TxDisabe and + // If CFIO is not Working as GPIO mode, Don't move TxDisable and // RxDisable if (GpioData->GpioConfig.PadMode == GpioPadModeGpio) { // diff --git a/src/soc/intel/denverton_ns/include/soc/bootblock.h b/src/soc/intel/denverton_ns/include/soc/bootblock.h index 8e58529..5136ecd 100644 --- a/src/soc/intel/denverton_ns/include/soc/bootblock.h +++ b/src/soc/intel/denverton_ns/include/soc/bootblock.h @@ -16,13 +16,13 @@ #ifndef _SOC_DENVERTON_NS_BOOTBLOCK_H_ #define _SOC_DENVERTON_NS_BOOTBLOCK_H_
-/* Bootblock pre console init programing */ +/* Bootblock pre console init programming */ //void bootblock_cpu_init(void); //void bootblock_pch_early_init(void); //void bootblock_systemagent_early_init(void); void early_uart_init(void);
-/* Bootblock post console init programing */ +/* Bootblock post console init programming */ //void enable_smbus(void); //void i2c_early_init(void); //void pch_early_init(void); diff --git a/src/soc/intel/denverton_ns/include/soc/gpio_defs.h b/src/soc/intel/denverton_ns/include/soc/gpio_defs.h index 9b63a08..43e0647 100644 --- a/src/soc/intel/denverton_ns/include/soc/gpio_defs.h +++ b/src/soc/intel/denverton_ns/include/soc/gpio_defs.h @@ -141,7 +141,7 @@ #define V_PCH_GPIO_RX_PAD_STATE_RAW 0x00 #define V_PCH_GPIO_RX_PAD_STATE_INT 0x01
-// RX Raw Overrride to 1 +// RX Raw Override to 1 #define B_PCH_GPIO_RX_RAW1 (1 << 28) #define N_PCH_GPIO_RX_RAW1 28 #define V_PCH_GPIO_RX_RAW1_DIS 0x00 diff --git a/src/soc/intel/denverton_ns/include/soc/smm.h b/src/soc/intel/denverton_ns/include/soc/smm.h index fe6dc82..771c3d8 100644 --- a/src/soc/intel/denverton_ns/include/soc/smm.h +++ b/src/soc/intel/denverton_ns/include/soc/smm.h @@ -47,7 +47,7 @@ };
/* Fills in the start and size for the requested SMM subregion. Returns - * 0 on susccess, < 0 on failure. */ + * 0 on success, < 0 on failure. */ int smm_subregion(int sub, void **start, size_t *size);
#if !defined(__PRE_RAM__) && !defined(__SMM___) diff --git a/src/soc/intel/denverton_ns/lpc.c b/src/soc/intel/denverton_ns/lpc.c index 48e81e5..1ac0961 100644 --- a/src/soc/intel/denverton_ns/lpc.c +++ b/src/soc/intel/denverton_ns/lpc.c @@ -39,7 +39,7 @@ #define PCH_LP_REDIR_ETR 120
/** - * Set miscellanous static southbridge features. + * Set miscellaneous static southbridge features. * * @param dev PCI device with I/O APIC control registers */ diff --git a/src/soc/intel/skylake/include/soc/bootblock.h b/src/soc/intel/skylake/include/soc/bootblock.h index 62dd234..59ce92a 100644 --- a/src/soc/intel/skylake/include/soc/bootblock.h +++ b/src/soc/intel/skylake/include/soc/bootblock.h @@ -24,12 +24,12 @@ static inline void bootblock_fsp_temp_ram_init(void) {} #endif
-/* Bootblock pre console init programing */ +/* Bootblock pre console init programming */ void bootblock_cpu_init(void); void bootblock_pch_early_init(void); void pch_uart_init(void);
-/* Bootblock post console init programing */ +/* Bootblock post console init programming */ void i2c_early_init(void); void pch_early_init(void); void pch_early_iorange_init(void); diff --git a/src/soc/intel/skylake/include/soc/vr_config.h b/src/soc/intel/skylake/include/soc/vr_config.h index 66b4a01..064ec31 100644 --- a/src/soc/intel/skylake/include/soc/vr_config.h +++ b/src/soc/intel/skylake/include/soc/vr_config.h @@ -33,7 +33,7 @@ */ int vr_config_enable;
- /* Power State X current cuttof in 1/4 Amp increments + /* Power State X current cutoff in 1/4 Amp increments * Range is 0-128A */ int psi1threshold; diff --git a/src/soc/intel/skylake/irq.c b/src/soc/intel/skylake/irq.c index d577896..50119a5 100644 --- a/src/soc/intel/skylake/irq.c +++ b/src/soc/intel/skylake/irq.c @@ -233,7 +233,7 @@ sizeof(SI_PCH_DEVICE_INTERRUPT_CONFIG));
params->NumOfDevIntConfig = intdeventry; - /* PxRC to IRQ programing */ + /* PxRC to IRQ programming */ for (i = 0; i < PCH_MAX_IRQ_CONFIG; i++) { switch (i) { case PCH_PARC: diff --git a/src/soc/intel/skylake/memmap.c b/src/soc/intel/skylake/memmap.c index c5dc8ac..9151d96 100644 --- a/src/soc/intel/skylake/memmap.c +++ b/src/soc/intel/skylake/memmap.c @@ -122,7 +122,7 @@
/* GDXC MOT */ tracehub_base -= GDXC_MOT_MEMORY_SIZE; - /* Round down to natual boundary accroding to PSMI size */ + /* Round down to natural boundary according to PSMI size */ tracehub_base = ALIGN_DOWN(tracehub_base, PSMI_BUFFER_AREA_SIZE); /* GDXC IOT */ tracehub_base -= GDXC_IOT_MEMORY_SIZE; diff --git a/src/soc/intel/skylake/romstage/systemagent.c b/src/soc/intel/skylake/romstage/systemagent.c index 8f2fb33..a262462 100644 --- a/src/soc/intel/skylake/romstage/systemagent.c +++ b/src/soc/intel/skylake/romstage/systemagent.c @@ -34,12 +34,12 @@ { EDRAMBAR, EDRAM_BASE_ADDRESS, EDRAM_BASE_SIZE, "EDRAMBAR" }, };
- /* Set Fixed MMIO addresss into PCI configuration space */ + /* Set Fixed MMIO address into PCI configuration space */ sa_set_pci_bar(soc_fixed_pci_resources, ARRAY_SIZE(soc_fixed_pci_resources)); - /* Set Fixed MMIO addresss into MCH base address */ + /* Set Fixed MMIO address into MCH base address */ sa_set_mch_bar(soc_fixed_mch_resources, ARRAY_SIZE(soc_fixed_mch_resources)); - /* Enable PAM regisers */ + /* Enable PAM registers */ enable_pam_region(); } diff --git a/src/soc/intel/skylake/systemagent.c b/src/soc/intel/skylake/systemagent.c index 8af995d..3227519 100644 --- a/src/soc/intel/skylake/systemagent.c +++ b/src/soc/intel/skylake/systemagent.c @@ -28,7 +28,7 @@ /* * SoC implementation * - * Add all known fixed memory ranges for Host Controller/Mmeory + * Add all known fixed memory ranges for Host Controller/Memory * controller. */ void soc_add_fixed_mmio_resources(struct device *dev, int *index) diff --git a/src/soc/marvell/mvmap2315/pmic.c b/src/soc/marvell/mvmap2315/pmic.c index 89ea5eb..f9fcfc8 100644 --- a/src/soc/marvell/mvmap2315/pmic.c +++ b/src/soc/marvell/mvmap2315/pmic.c @@ -92,12 +92,12 @@
void no_boot(void) { - /*TODO: impelement no_boot */ + /*TODO: implement no_boot */ }
void charging_screen(void) { - /*TODO: impelement charging_screen */ + /*TODO: implement charging_screen */ }
void full_boot(void) diff --git a/src/soc/nvidia/tegra210/romstage.c b/src/soc/nvidia/tegra210/romstage.c index 7b6444d..8fb839d 100644 --- a/src/soc/nvidia/tegra210/romstage.c +++ b/src/soc/nvidia/tegra210/romstage.c @@ -60,7 +60,7 @@ * Trust Zone needs to be initialized after the DRAM initialization * because carveout registers are programmed during DRAM init. * cbmem_initialize() is dependent on the Trust Zone region - * initalization because CBMEM lives right below the Trust Zone which + * initialization because CBMEM lives right below the Trust Zone which * needs to be properly identified. */ trustzone_region_init(); diff --git a/src/soc/qualcomm/ipq40xx/blobs_init.c b/src/soc/qualcomm/ipq40xx/blobs_init.c index 77c0289..2b5e1fd 100644 --- a/src/soc/qualcomm/ipq40xx/blobs_init.c +++ b/src/soc/qualcomm/ipq40xx/blobs_init.c @@ -108,7 +108,7 @@ die("Fail to Initialize DDR\n");
/* - * Once DDR initializer finished, its verison can be found at a fixed + * Once DDR initializer finished, its version can be found at a fixed * address in SRAM. */ printk(BIOS_INFO, "DDR version %.*s initialized\n", diff --git a/src/soc/qualcomm/ipq806x/blobs_init.c b/src/soc/qualcomm/ipq806x/blobs_init.c index 5b19fc1..9549e9a 100644 --- a/src/soc/qualcomm/ipq806x/blobs_init.c +++ b/src/soc/qualcomm/ipq806x/blobs_init.c @@ -80,7 +80,7 @@ die("Fail to Initialize DDR\n");
/* - * Once DDR initializer finished, its verison can be found at a fixed + * Once DDR initializer finished, its version can be found at a fixed * address in SRAM. */ printk(BIOS_INFO, "DDR version %.*s initialized\n",
-
Jonathan Neuschäfer (Code Review)