Patch set updated for coreboot: df4bdf8 lynxpoint: fix enable_pm1() function

[Stefan Reinauer]

Stefan Reinauer ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2978

-gerrit

commit df4bdf845632cc016baa0b892b6c7ff8a4b0d2ec
Author: Aaron Durbin 
Date:   Wed Mar 27 21:13:02 2013 -0500

lynxpoint: fix enable_pm1() function

The new enable_pm1() function was doing 2 things wrong:

1. It was doing a RMW of the pm1 register. This means we were
       keeping around the enables from the OS during S3 resume. This
       is bad in the face of the RTC alarm waking us up because it would
       cause an infinite stream of SMIs.
    2. The register size of PM1_EN is 16-bits. However, the previous
       implementation was accessing it as a 32-bit register.

The PM1 enables should only be set to what we expect to handle in the
    firmware before the OS changes to ACPI mode.

Change-Id: Ib1d3caf6c84a1670d9456ed159420c6cb64f555e
    Signed-off-by: Aaron Durbin 
---
 src/southbridge/intel/lynxpoint/pch.h    |  2 +-
 src/southbridge/intel/lynxpoint/pmutil.c | 10 +++++-----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h
index a48e0a4..7246739 100644
--- a/src/southbridge/intel/lynxpoint/pch.h
+++ b/src/southbridge/intel/lynxpoint/pch.h
@@ -139,7 +139,7 @@ void enable_pm1_control(u32 mask);
 void disable_pm1_control(u32 mask);
 /* PM1 */
 u16 clear_pm1_status(void);
-void enable_pm1(u32 mask);
+void enable_pm1(u16 events);
 u32 clear_smi_status(void);
 /* SMI */
 void enable_smi(u32 mask);
diff --git a/src/southbridge/intel/lynxpoint/pmutil.c b/src/southbridge/intel/lynxpoint/pmutil.c
index 3a0b70b..386705f 100644
--- a/src/southbridge/intel/lynxpoint/pmutil.c
+++ b/src/southbridge/intel/lynxpoint/pmutil.c
@@ -29,6 +29,7 @@
 #include <device/pci.h>
 #include <device/pci_def.h>
 #include <console/console.h>
+#include <pc80/mc146818rtc.h>
 #include "pch.h"

#if CONFIG_INTEL_LYNXPOINT_LP
@@ -104,6 +105,7 @@ static u16 reset_pm1_status(void)
 {
    u16 pm1_sts = inw(get_pmbase() + PM1_STS);
    outw(pm1_sts, get_pmbase() + PM1_STS);
+
    return pm1_sts;
 }

@@ -137,12 +139,10 @@ u16 clear_pm1_status(void)
    return print_pm1_status(reset_pm1_status());
 }

-/* Enable PM1 event */
-void enable_pm1(u32 mask)
+/* Set the PM1 register to events */
+void enable_pm1(u16 events)
 {
-	u32 pm1_en = inl(get_pmbase() + PM1_EN);
-	pm1_en |= mask;
-	outl(pm1_en, get_pmbase() + PM1_EN);
+	outw(events, get_pmbase() + PM1_EN);
 }