Change in coreboot[master]: mb/google/guybrush/var/guybrush: Update GPIO configuration

[Karthik Ramasubramanian (Code Review)]

Attention is currently required from: Raul Rangel, Martin Roth, Eric Peers, Karthik Ramasubramanian.
Hello build bot (Jenkins), Raul Rangel, Martin Roth, Furquan Shaikh, Eric Peers,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/55148

to look at the new patch set (#4).

Change subject: mb/google/guybrush/var/guybrush: Update GPIO configuration
......................................................................

mb/google/guybrush/var/guybrush: Update GPIO configuration

Some of the GPIOs are either re-purposed for different use-cases or are
unused in upcoming board phase (board version 2). Update the GPIO
configuration accordingly. Here are the GPIOs that are updated:
GPIO	Board Id 1		Board Id 2
=============================================
GPIO31	TP183			EN_SPKR
GPIO69	EN_SPKR			SD_AUX_REST_L
GPIO70	SD_AUX_RESET_L		Unused TP27
GPIO74	RAM_ID_CHAN_SEL		Unused TP49

BUG=b:189327557, b:188542649, b:188542497
TEST=Build Guybrush mainboard. Verify Audio is audible and SD card is
detected fine in Board ID 1.

Change-Id: I31523b3e03d2b59577f33eae548747834cfc98aa
Signed-off-by: Karthikeyan Ramasubramanian 
---
M src/mainboard/google/guybrush/variants/baseboard/gpio.c
M src/mainboard/google/guybrush/variants/guybrush/gpio.c
2 files changed, 14 insertions(+), 8 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/48/55148/4