Paul Menzel has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/38406 )
Change subject: mb: Add Dell OptiPlex 990 ......................................................................
mb: Add Dell OptiPlex 990
Old firmware was running.
DMI: Dell Inc. OptiPlex 990/06D7TR, BIOS A03 04/11/2011
The system does not boot. Fan are spinning. Nothing on serial.
Change-Id: I765911caa921b3dde0e35c628818a108e49714e0 Signed-off-by: Paul Menzel pmenzel@molgen.mpg.de
dell/optiplex_990: Re-run current autoport
Change-Id: Ibf30d058f321affe40633c38df30e8d89868c1c2 Signed-off-by: Paul Menzel pmenzel@molgen.mpg.de --- A src/mainboard/dell/Kconfig A src/mainboard/dell/Kconfig.name A src/mainboard/dell/optiplex_990/Kconfig A src/mainboard/dell/optiplex_990/Kconfig.name A src/mainboard/dell/optiplex_990/Makefile.inc A src/mainboard/dell/optiplex_990/acpi/ec.asl A src/mainboard/dell/optiplex_990/acpi/platform.asl A src/mainboard/dell/optiplex_990/acpi/superio.asl A src/mainboard/dell/optiplex_990/acpi_tables.c A src/mainboard/dell/optiplex_990/board_info.txt A src/mainboard/dell/optiplex_990/devicetree.cb A src/mainboard/dell/optiplex_990/dsdt.asl A src/mainboard/dell/optiplex_990/early_init.c A src/mainboard/dell/optiplex_990/gpio.c A src/mainboard/dell/optiplex_990/hda_verb.c A src/mainboard/dell/optiplex_990/mainboard.c 16 files changed, 562 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/06/38406/1
diff --git a/src/mainboard/dell/Kconfig b/src/mainboard/dell/Kconfig new file mode 100644 index 0000000..298c62b --- /dev/null +++ b/src/mainboard/dell/Kconfig @@ -0,0 +1,16 @@ +if VENDOR_DELL + +choice + prompt "Mainboard model" + +source "src/mainboard/dell/*/Kconfig.name" + +endchoice + +source "src/mainboard/dell/*/Kconfig" + +config MAINBOARD_VENDOR + string + default "Dell Inc." + +endif # VENDOR_DELL diff --git a/src/mainboard/dell/Kconfig.name b/src/mainboard/dell/Kconfig.name new file mode 100644 index 0000000..3d2fefd --- /dev/null +++ b/src/mainboard/dell/Kconfig.name @@ -0,0 +1,2 @@ +config VENDOR_DELL + bool "Dell Inc." diff --git a/src/mainboard/dell/optiplex_990/Kconfig b/src/mainboard/dell/optiplex_990/Kconfig new file mode 100644 index 0000000..4e45cb9 --- /dev/null +++ b/src/mainboard/dell/optiplex_990/Kconfig @@ -0,0 +1,33 @@ +if BOARD_DELL_OPTIPLEX_990 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_10240 + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_INT15 + select NORTHBRIDGE_INTEL_SANDYBRIDGE + select SERIRQ_CONTINUOUS_MODE + select SOUTHBRIDGE_INTEL_BD82X6X + select USE_NATIVE_RAMINIT + +config MAINBOARD_DIR + string + default dell/optiplex_990 + +config MAINBOARD_PART_NUMBER + string + default "OptiPlex 990" + +config DRAM_RESET_GATE_GPIO # FIXME: check this + int + default 60 + +config MAX_CPUS + int + default 8 + +config USBDEBUG_HCD_INDEX # FIXME: check this + int + default 2 +endif diff --git a/src/mainboard/dell/optiplex_990/Kconfig.name b/src/mainboard/dell/optiplex_990/Kconfig.name new file mode 100644 index 0000000..873a6c5 --- /dev/null +++ b/src/mainboard/dell/optiplex_990/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_DELL_OPTIPLEX_990 + bool "OptiPlex 990" diff --git a/src/mainboard/dell/optiplex_990/Makefile.inc b/src/mainboard/dell/optiplex_990/Makefile.inc new file mode 100644 index 0000000..3465dfe --- /dev/null +++ b/src/mainboard/dell/optiplex_990/Makefile.inc @@ -0,0 +1,4 @@ +bootblock-y += early_init.c +bootblock-y += gpio.c +romstage-y += early_init.c +romstage-y += gpio.c diff --git a/src/mainboard/dell/optiplex_990/acpi/ec.asl b/src/mainboard/dell/optiplex_990/acpi/ec.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/dell/optiplex_990/acpi/ec.asl diff --git a/src/mainboard/dell/optiplex_990/acpi/platform.asl b/src/mainboard/dell/optiplex_990/acpi/platform.asl new file mode 100644 index 0000000..0222986 --- /dev/null +++ b/src/mainboard/dell/optiplex_990/acpi/platform.asl @@ -0,0 +1,8 @@ +Method(_WAK,1) +{ + Return(Package(){0,0}) +} + +Method(_PTS,1) +{ +} diff --git a/src/mainboard/dell/optiplex_990/acpi/superio.asl b/src/mainboard/dell/optiplex_990/acpi/superio.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/dell/optiplex_990/acpi/superio.asl diff --git a/src/mainboard/dell/optiplex_990/acpi_tables.c b/src/mainboard/dell/optiplex_990/acpi_tables.c new file mode 100644 index 0000000..cfc2061 --- /dev/null +++ b/src/mainboard/dell/optiplex_990/acpi_tables.c @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/bd82x6x/nvs.h> + +/* FIXME: check this function. */ +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + /* The lid is open by default. */ + gnvs->lids = 1; + + gnvs->tcrt = 100; + gnvs->tpsv = 90; +} diff --git a/src/mainboard/dell/optiplex_990/board_info.txt b/src/mainboard/dell/optiplex_990/board_info.txt new file mode 100644 index 0000000..be6bff8 --- /dev/null +++ b/src/mainboard/dell/optiplex_990/board_info.txt @@ -0,0 +1,4 @@ +Category: desktop +ROM protocol: SPI +Flashrom support: n +FIXME: check category, , put ROM package, ROM socketed, Release year diff --git a/src/mainboard/dell/optiplex_990/devicetree.cb b/src/mainboard/dell/optiplex_990/devicetree.cb new file mode 100644 index 0000000..999c190 --- /dev/null +++ b/src/mainboard/dell/optiplex_990/devicetree.cb @@ -0,0 +1,107 @@ +chip northbridge/intel/sandybridge # FIXME: GPU registers may not always apply. + register "gfx.link_frequency_270_mhz" = "0" + register "gfx.use_spread_spectrum_clock" = "0" + register "gpu_cpu_backlight" = "0x00000000" + register "gpu_dp_b_hotplug" = "0" + register "gpu_dp_c_hotplug" = "0" + register "gpu_dp_d_hotplug" = "0" + register "gpu_panel_port_select" = "0" + register "gpu_panel_power_backlight_off_delay" = "0" + register "gpu_panel_power_backlight_on_delay" = "0" + register "gpu_panel_power_cycle_delay" = "0" + register "gpu_panel_power_down_delay" = "0" + register "gpu_panel_power_up_delay" = "0" + register "gpu_pch_backlight" = "0x00000000" + device cpu_cluster 0x0 on + chip cpu/intel/model_206ax # FIXME: check all registers + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0x0 on + end + device lapic 0xacac off + end + end + end + device domain 0x0 on + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "c2_latency" = "0x0065" + register "docking_supported" = "1" + register "gen1_dec" = "0x007c0681" + register "gen2_dec" = "0x000c1641" + register "gen3_dec" = "0x000400e1" + register "gen4_dec" = "0x001c02d1" + register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 0, 0 }" + register "pcie_port_coalesce" = "1" + register "sata_interface_speed_support" = "0x3" + register "sata_port_map" = "0x3" + register "spi_lvscc" = "0x2005" + register "spi_uvscc" = "0x2005" + device pci 16.0 off # Management Engine Interface 1 + end + device pci 16.1 off # Management Engine Interface 2 + end + device pci 16.2 off # Management Engine IDE-R + end + device pci 16.3 off # Management Engine KT + end + device pci 19.0 on # Intel Gigabit Ethernet + subsystemid 0x1028 0x047e + end + device pci 1a.0 on # USB2 EHCI #2 + subsystemid 0x1028 0x047e + end + device pci 1b.0 on # High Definition Audio + subsystemid 0x1028 0x047e + end + device pci 1c.0 on # PCIe Port #1 + subsystemid 0x1028 0x047e + end + device pci 1c.1 off # PCIe Port #2 + end + device pci 1c.2 on # PCIe Port #3 + subsystemid 0x1028 0x047e + end + device pci 1c.3 off # PCIe Port #4 + end + device pci 1c.4 off # PCIe Port #5 + end + device pci 1c.5 off # PCIe Port #6 + end + device pci 1c.6 off # PCIe Port #7 + end + device pci 1c.7 off # PCIe Port #8 + end + device pci 1d.0 on # USB2 EHCI #1 + subsystemid 0x1028 0x047e + end + device pci 1e.0 on # PCI bridge + subsystemid 0x1028 0x047e + end + device pci 1f.0 on # LPC bridge PCI-LPC bridge + subsystemid 0x1028 0x047e + end + device pci 1f.2 on # SATA Controller 1 + subsystemid 0x1028 0x047e + end + device pci 1f.3 on # SMBus + subsystemid 0x1028 0x047e + end + device pci 1f.5 off # SATA Controller 2 + end + device pci 1f.6 off # Thermal + end + end + device pci 00.0 on # Host bridge Host bridge + subsystemid 0x1028 0x047e + end + device pci 01.0 on # PEG + subsystemid 0x1028 0x047e + end + device pci 02.0 off # iGPU + end + end +end diff --git a/src/mainboard/dell/optiplex_990/dsdt.asl b/src/mainboard/dell/optiplex_990/dsdt.asl new file mode 100644 index 0000000..b00a7ff --- /dev/null +++ b/src/mainboard/dell/optiplex_990/dsdt.asl @@ -0,0 +1,29 @@ +#define BRIGHTNESS_UP _SB.PCI0.GFX0.INCB +#define BRIGHTNESS_DOWN _SB.PCI0.GFX0.DECB +#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 + + +#include <arch/acpi.h> + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, /* DSDT revision: ACPI 2.0 and up */ + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 /* OEM revision */ +) +{ + #include "acpi/platform.asl" + #include <cpu/intel/common/acpi/cpu.asl> + #include <southbridge/intel/common/acpi/platform.asl> + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + #include <southbridge/intel/common/acpi/sleepstates.asl> + + Device (_SB.PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } +} diff --git a/src/mainboard/dell/optiplex_990/early_init.c b/src/mainboard/dell/optiplex_990/early_init.c new file mode 100644 index 0000000..9e30fdd --- /dev/null +++ b/src/mainboard/dell/optiplex_990/early_init.c @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* FIXME: Check if all includes are needed. */ + +#include <stdint.h> +#include <string.h> +#include <timestamp.h> +#include <arch/byteorder.h> +#include <device/mmio.h> +#include <device/pci_ops.h> +#include <device/pnp_ops.h> +#include <console/console.h> +#include <bootblock_common.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <northbridge/intel/sandybridge/raminit_native.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/common/gpio.h> + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 0, 0 }, + { 1, 0, 0 }, + { 1, 0, 1 }, + { 1, 0, 1 }, + { 1, 0, 2 }, + { 1, 0, 2 }, + { 1, 0, 3 }, + { 1, 0, 3 }, + { 1, 1, 5 }, + { 1, 1, 5 }, + { 1, 0, 7 }, + { 1, 0, 6 }, + { 1, 0, 6 }, + { 1, 0, 7 }, +}; + +void bootblock_mainboard_early_init(void) +{ + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3c0f); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0000); +} + +/* FIXME: Put proper SPD map here. */ +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + read_spd(&spd[0], 0x50, id_only); + read_spd(&spd[1], 0x51, id_only); + read_spd(&spd[2], 0x52, id_only); + read_spd(&spd[3], 0x53, id_only); +} diff --git a/src/mainboard/dell/optiplex_990/gpio.c b/src/mainboard/dell/optiplex_990/gpio.c new file mode 100644 index 0000000..da88c2b --- /dev/null +++ b/src/mainboard/dell/optiplex_990/gpio.c @@ -0,0 +1,217 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_NATIVE, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_GPIO, + .gpio11 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_NATIVE, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_GPIO, + .gpio19 = GPIO_MODE_NATIVE, + .gpio20 = GPIO_MODE_GPIO, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_GPIO, + .gpio26 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio11 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_OUTPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio18 = GPIO_DIR_INPUT, + .gpio20 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, + .gpio23 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_INPUT, + .gpio25 = GPIO_DIR_INPUT, + .gpio26 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_INPUT, + .gpio29 = GPIO_DIR_INPUT, + .gpio31 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio11 = GPIO_LEVEL_LOW, + .gpio14 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio24 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio10 = GPIO_INVERT, + .gpio13 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_GPIO, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_GPIO, + .gpio45 = GPIO_MODE_GPIO, + .gpio46 = GPIO_MODE_GPIO, + .gpio47 = GPIO_MODE_GPIO, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_NATIVE, + .gpio51 = GPIO_MODE_NATIVE, + .gpio52 = GPIO_MODE_NATIVE, + .gpio53 = GPIO_MODE_NATIVE, + .gpio54 = GPIO_MODE_NATIVE, + .gpio55 = GPIO_MODE_NATIVE, + .gpio56 = GPIO_MODE_GPIO, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_GPIO, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_INPUT, + .gpio33 = GPIO_DIR_INPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio35 = GPIO_DIR_INPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio44 = GPIO_DIR_INPUT, + .gpio45 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_INPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio49 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_NATIVE, + .gpio67 = GPIO_MODE_NATIVE, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_GPIO, + .gpio71 = GPIO_MODE_NATIVE, + .gpio72 = GPIO_MODE_GPIO, + .gpio73 = GPIO_MODE_GPIO, + .gpio74 = GPIO_MODE_GPIO, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_INPUT, + .gpio72 = GPIO_DIR_INPUT, + .gpio73 = GPIO_DIR_INPUT, + .gpio74 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio74 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { + .gpio74 = GPIO_RESET_RSMRST, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/dell/optiplex_990/hda_verb.c b/src/mainboard/dell/optiplex_990/hda_verb.c new file mode 100644 index 0000000..ac509bf --- /dev/null +++ b/src/mainboard/dell/optiplex_990/hda_verb.c @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/dell/optiplex_990/mainboard.c b/src/mainboard/dell/optiplex_990/mainboard.c new file mode 100644 index 0000000..e5cfebf --- /dev/null +++ b/src/mainboard/dell/optiplex_990/mainboard.c @@ -0,0 +1,15 @@ +#include <device/device.h> +#include <drivers/intel/gma/int15.h> +#include <southbridge/intel/bd82x6x/pch.h> + +static void mainboard_enable(struct device *dev) +{ + /* FIXME: fix these values. */ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, + GMA_INT15_PANEL_FIT_DEFAULT, + GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +};
Hello Angel Pons, build bot (Jenkins), Patrick Georgi, Martin Roth,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/38406
to look at the new patch set (#2).
Change subject: mb: Add Dell OptiPlex 990 ......................................................................
mb: Add Dell OptiPlex 990
Old firmware was running.
DMI: Dell Inc. OptiPlex 990/06D7TR, BIOS A03 04/11/2011
The system does not boot. Fan are spinning. Nothing on serial.
Change-Id: Ibf30d058f321affe40633c38df30e8d89868c1c2 Signed-off-by: Paul Menzel pmenzel@molgen.mpg.de --- A src/mainboard/dell/Kconfig A src/mainboard/dell/Kconfig.name A src/mainboard/dell/optiplex_990/Kconfig A src/mainboard/dell/optiplex_990/Kconfig.name A src/mainboard/dell/optiplex_990/Makefile.inc A src/mainboard/dell/optiplex_990/acpi/ec.asl A src/mainboard/dell/optiplex_990/acpi/platform.asl A src/mainboard/dell/optiplex_990/acpi/superio.asl A src/mainboard/dell/optiplex_990/acpi_tables.c A src/mainboard/dell/optiplex_990/board_info.txt A src/mainboard/dell/optiplex_990/devicetree.cb A src/mainboard/dell/optiplex_990/dsdt.asl A src/mainboard/dell/optiplex_990/early_init.c A src/mainboard/dell/optiplex_990/gpio.c A src/mainboard/dell/optiplex_990/hda_verb.c A src/mainboard/dell/optiplex_990/mainboard.c 16 files changed, 562 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/06/38406/2
Hello Angel Pons, build bot (Jenkins), Patrick Georgi, Martin Roth,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/38406
to look at the new patch set (#3).
Change subject: mb: Add Dell OptiPlex 990 ......................................................................
mb: Add Dell OptiPlex 990
Old firmware was running.
DMI: Dell Inc. OptiPlex 990/06D7TR, BIOS A03 04/11/2011
The system does not boot. Fan are spinning. Nothing on serial.
Change-Id: Ibf30d058f321affe40633c38df30e8d89868c1c2 Signed-off-by: Paul Menzel pmenzel@molgen.mpg.de --- A src/mainboard/dell/Kconfig A src/mainboard/dell/Kconfig.name A src/mainboard/dell/optiplex_990/Kconfig A src/mainboard/dell/optiplex_990/Kconfig.name A src/mainboard/dell/optiplex_990/Makefile.inc A src/mainboard/dell/optiplex_990/acpi/ec.asl A src/mainboard/dell/optiplex_990/acpi/platform.asl A src/mainboard/dell/optiplex_990/acpi/superio.asl A src/mainboard/dell/optiplex_990/acpi_tables.c A src/mainboard/dell/optiplex_990/board_info.txt A src/mainboard/dell/optiplex_990/devicetree.cb A src/mainboard/dell/optiplex_990/dsdt.asl A src/mainboard/dell/optiplex_990/early_init.c A src/mainboard/dell/optiplex_990/gpio.c A src/mainboard/dell/optiplex_990/hda_verb.c A src/mainboard/dell/optiplex_990/mainboard.c 16 files changed, 575 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/06/38406/3
Paul Menzel has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/38406 )
Change subject: mb: Add Dell OptiPlex 990 ......................................................................
Patch Set 3:
`src/mainboard/dell/optiplex_990/gpio.c` is the same as `src/mainboard/dell/optiplex_790/variants/optiplex_790_mt-sff/gpio.c` from Change-Id If3d3a13163d5da1368259a7498019d42fb3ed57f [1].
[1]: https://review.coreboot.org/c/coreboot/+/21774
Hello Angel Pons, build bot (Jenkins), Patrick Georgi, Martin Roth,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/38406
to look at the new patch set (#4).
Change subject: mb: Add Dell OptiPlex 990 ......................................................................
mb: Add Dell OptiPlex 990
Old firmware was running.
DMI: Dell Inc. OptiPlex 990/06D7TR, BIOS A03 04/11/2011
The system does not boot. Fan are spinning. Nothing on serial.
Change-Id: Ibf30d058f321affe40633c38df30e8d89868c1c2 Signed-off-by: Paul Menzel pmenzel@molgen.mpg.de --- A src/mainboard/dell/Kconfig A src/mainboard/dell/Kconfig.name A src/mainboard/dell/optiplex_990/Kconfig A src/mainboard/dell/optiplex_990/Kconfig.name A src/mainboard/dell/optiplex_990/Makefile.inc A src/mainboard/dell/optiplex_990/acpi/ec.asl A src/mainboard/dell/optiplex_990/acpi/platform.asl A src/mainboard/dell/optiplex_990/acpi/superio.asl A src/mainboard/dell/optiplex_990/acpi_tables.c A src/mainboard/dell/optiplex_990/board_info.txt A src/mainboard/dell/optiplex_990/devicetree.cb A src/mainboard/dell/optiplex_990/dsdt.asl A src/mainboard/dell/optiplex_990/early_init.c A src/mainboard/dell/optiplex_990/gpio.c A src/mainboard/dell/optiplex_990/hda_verb.c A src/mainboard/dell/optiplex_990/mainboard.c 16 files changed, 614 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/06/38406/4
Hello Angel Pons, build bot (Jenkins), Patrick Georgi, Martin Roth,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/38406
to look at the new patch set (#5).
Change subject: mb: Add Dell OptiPlex 990 ......................................................................
mb: Add Dell OptiPlex 990
The board it question is for the midi tower, so the official name is OptiPlex 990MT.
Old firmware was running.
DMI: Dell Inc. OptiPlex 990/06D7TR, BIOS A03 04/11/2011
The system does not boot. Fan are spinning. Nothing on serial.
Change-Id: Ibf30d058f321affe40633c38df30e8d89868c1c2 Signed-off-by: Paul Menzel pmenzel@molgen.mpg.de --- A src/mainboard/dell/Kconfig A src/mainboard/dell/Kconfig.name A src/mainboard/dell/optiplex_990/Kconfig A src/mainboard/dell/optiplex_990/Kconfig.name A src/mainboard/dell/optiplex_990/Makefile.inc A src/mainboard/dell/optiplex_990/acpi/ec.asl A src/mainboard/dell/optiplex_990/acpi/platform.asl A src/mainboard/dell/optiplex_990/acpi/superio.asl A src/mainboard/dell/optiplex_990/acpi_tables.c A src/mainboard/dell/optiplex_990/board_info.txt A src/mainboard/dell/optiplex_990/devicetree.cb A src/mainboard/dell/optiplex_990/dsdt.asl A src/mainboard/dell/optiplex_990/early_init.c A src/mainboard/dell/optiplex_990/gpio.c A src/mainboard/dell/optiplex_990/hda_verb.c A src/mainboard/dell/optiplex_990/mainboard.c 16 files changed, 614 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/06/38406/5