Krishna P Bhat D has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/59915 )
Change subject: mb/intel/adlrvp_n: Add initial code for adl-n variant board ......................................................................
mb/intel/adlrvp_n: Add initial code for adl-n variant board
This patch adds the following list of changes: 1. Create a new devicetree for adlrvp-n and copy contents of adlrvp-p devictree. 2. Add support for 2 mainboards as ADL-N board with default EC (Windows SKU) and Chrome EC (Chrome SKU) and copy overridetree contents from adlrvp-p.
Change-Id: I4abf3bf62ec0398ae75e21575a2fab0d44b5c7ad Signed-off-by: Krishna Prasad Bhat krishna.p.bhat.d@intel.com --- A src/mainboard/intel/adlrvp/devicetree_n.cb A src/mainboard/intel/adlrvp/variants/adlrvp_n/overridetree.cb A src/mainboard/intel/adlrvp/variants/adlrvp_n_ext_ec/overridetree.cb 3 files changed, 511 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/15/59915/1
diff --git a/src/mainboard/intel/adlrvp/devicetree_n.cb b/src/mainboard/intel/adlrvp/devicetree_n.cb new file mode 100644 index 0000000..2c45e85 --- /dev/null +++ b/src/mainboard/intel/adlrvp/devicetree_n.cb @@ -0,0 +1,446 @@ +chip soc/intel/alderlake + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "pmc_gpe0_dw0" = "GPP_B" + register "pmc_gpe0_dw1" = "GPP_D" + register "pmc_gpe0_dw2" = "GPP_E" + + # Enable HECI1 interface + register "HeciEnabled" = "1" + + # FSP configuration + + # Enable CNVi BT + register "CnviBtCore" = "true" + + # Sagv Configuration + register "SaGv" = "SaGv_Enabled" + + register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" # Type-C Port1 + register "usb2_ports[1]" = "USB2_PORT_MID(OC0)" # Type-C Port2 + register "usb2_ports[2]" = "USB2_PORT_MID(OC3)" # Type-C Port3 + register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WWAN + register "usb2_ports[4]" = "USB2_PORT_MID(OC3)" # Type-C Port4 + register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # FPS connector + register "usb2_ports[6]" = "USB2_PORT_MID(OC0)" # USB3/2 Type A port1 + register "usb2_ports[7]" = "USB2_PORT_MID(OC0)" # USB3/2 Type A port2 + register "usb2_ports[8]" = "USB2_PORT_MID(OC3)" # USB3/2 Type A port3 + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WLAN + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC3)" # USB3/2 Type A port1 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port2 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port3 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # M.2 WWAN + + # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x000c0201" + # EC memory map range is 0x900-0x9ff + register "gen3_dec" = "0x00fc0901" + + # Enable PCH PCIE RP 5 using CLK 2 + register "pch_pcie_rp[PCH_RP(5)]" = "{ + .clk_src = 2, + .clk_req = 2, + .flags = PCIE_RP_CLK_REQ_DETECT, + }" + + # Enable PCH PCIE RP 6 using CLK 5 + register "pch_pcie_rp[PCH_RP(6)]" = "{ + .clk_src = 5, + .clk_req = 5, + .flags = PCIE_RP_CLK_REQ_DETECT, + }" + + # Enable PCH PCIE RP 8 using free running CLK (0x80) + # Clock source is shared with LAN and hence marked as free running. + register "pch_pcie_rp[PCH_RP(8)]" = "{ + .flags = PCIE_RP_CLK_SRC_UNUSED, + }" + register "pcie_clk_config_flag[6]" = "PCIE_CLK_FREE_RUNNING" + + # Enable PCH PCIE RP 9 using CLK 1 + register "pch_pcie_rp[PCH_RP(9)]" = "{ + .clk_src = 1, + .clk_req = 1, + .flags = PCIE_RP_CLK_REQ_DETECT, + }" + + # Enable PCH PCIE RP 11 for optane + register "pch_pcie_rp[PCH_RP(11)]" = "{ + .flags = PCIE_RP_CLK_SRC_UNUSED, + }" + + # Hybrid storage mode + register "HybridStorageMode" = "1" + + # Enable CPU PCIE RP 1 using CLK 0 + register "cpu_pcie_rp[CPU_RP(1)]" = "{ + .clk_req = 0, + .clk_src = 0, + }" + + # Enable CPU PCIE RP 2 using CLK 3 + register "cpu_pcie_rp[CPU_RP(2)]" = "{ + .clk_req = 3, + .clk_src = 3, + }" + + # Enable CPU PCIE RP 3 using CLK 4 + register "cpu_pcie_rp[CPU_RP(3)]" = "{ + .clk_req = 4, + .clk_src = 4, + }" + + register "SataSalpSupport" = "1" + + register "SataPortsEnable" = "{ + [0] = 1, + [1] = 1, + [2] = 1, + [3] = 1, + }" + + register "SataPortsDevSlp" = "{ + [0] = 1, + [1] = 1, + [2] = 1, + [3] = 1, + }" + + # Enable EDP in PortA + register "DdiPortAConfig" = "1" + # Enable HDMI in Port B + register "ddi_ports_config" = "{ + [DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC, + }" + + # TCSS USB3 + register "TcssAuxOri" = "0" + + register "s0ix_enable" = "1" + register "dptf_enable" = "1" + + register "SerialIoI2cMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoDisabled, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + }" + + register "SerialIoGSpiMode" = "{ + [PchSerialIoIndexGSPI0] = PchSerialIoPci, + [PchSerialIoIndexGSPI1] = PchSerialIoDisabled, + [PchSerialIoIndexGSPI2] = PchSerialIoDisabled, + [PchSerialIoIndexGSPI3] = PchSerialIoDisabled, + }" + + register "SerialIoGSpiCsMode" = "{ + [PchSerialIoIndexGSPI0] = 0, + [PchSerialIoIndexGSPI1] = 0, + [PchSerialIoIndexGSPI2] = 0, + [PchSerialIoIndexGSPI3] = 0, + }" + + register "SerialIoGSpiCsState" = "{ + [PchSerialIoIndexGSPI0] = 0, + [PchSerialIoIndexGSPI1] = 0, + [PchSerialIoIndexGSPI2] = 0, + [PchSerialIoIndexGSPI3] = 0, + }" + + register "SerialIoUartMode" = "{ + [PchSerialIoIndexUART0] = PchSerialIoSkipInit, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + # HD Audio + register "PchHdaDspEnable" = "1" + register "PchHdaIDispLinkTmode" = "HDA_TMODE_8T" + register "PchHdaIDispLinkFrequency" = "HDA_LINKFREQ_96MHZ" + register "PchHdaIDispCodecEnable" = "1" + + register "CnviBtAudioOffload" = "true" + + # Intel Common SoC Config + register "common_soc_config" = "{ + .i2c[0] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + }, + }" + + device domain 0 on + device ref pcie5 on end + device ref igpu on end + device ref dtt on + chip drivers/intel/dptf + + ## sensor information + register "options.tsr[0].desc" = ""Ambient"" + register "options.tsr[1].desc" = ""Battery"" + register "options.tsr[2].desc" = ""DDR"" + register "options.tsr[3].desc" = ""Skin"" + + ## Active Policy + # TODO: below values are initial reference values only + register "policies.active" = "{ + [0] = { + .target = DPTF_CPU, + .thresholds = { + TEMP_PCT(95, 90), + TEMP_PCT(90, 80), + } + }, + [1] = { + .target = DPTF_TEMP_SENSOR_0, + .thresholds = { + TEMP_PCT(80, 90), + TEMP_PCT(70, 80), + } + } + }" + + ## Passive Policy + # TODO: below values are initial reference values only + register "policies.passive" = "{ + [0] = DPTF_PASSIVE(CPU, CPU, 95, 10000), + [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 85, 50000), + [2] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_1, 85, 50000), + [3] = DPTF_PASSIVE(CPU, TEMP_SENSOR_2, 85, 50000), + [4] = DPTF_PASSIVE(CPU, TEMP_SENSOR_3, 85, 50000), + }" + + ## Critical Policy + # TODO: below values are initial reference values only + register "policies.critical" = "{ + [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN), + [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 95, SHUTDOWN), + [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 95, SHUTDOWN), + [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 95, SHUTDOWN), + [4] = DPTF_CRITICAL(TEMP_SENSOR_3, 95, SHUTDOWN), + }" + + ## Power Limits Control + register "controls.power_limits" = "{ + .pl1 = { + .min_power = 35000, + .max_power = 45000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 200, + }, + .pl2 = { + .min_power = 56000, + .max_power = 56000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000, + } + }" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf" = "{ + [0] = { 255, 3000 }, + [1] = { 24, 1500 }, + [2] = { 16, 1000 }, + [3] = { 8, 500 } + }" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf" = "{ + [0] = { 90, 6700, 220, 2200, }, + [1] = { 80, 5800, 180, 1800, }, + [2] = { 70, 5000, 145, 1450, }, + [3] = { 60, 4900, 115, 1150, }, + [4] = { 50, 3838, 90, 900, }, + [5] = { 40, 2904, 55, 550, }, + [6] = { 30, 2337, 30, 300, }, + [7] = { 20, 1608, 15, 150, }, + [8] = { 10, 800, 10, 100, }, + [9] = { 0, 0, 0, 50, } + }" + + ## Fan options + register "options.fan.fine_grained_control" = "1" + register "options.fan.step_size" = "2" + + device generic 0 alias dptf_policy on end + end + end + device ref ipu on + chip drivers/intel/mipi_camera + register "acpi_uid" = "0x50000" + register "acpi_name" = ""IPU0"" + register "device_type" = "INTEL_ACPI_CAMERA_CIO2" + + register "cio2_num_ports" = "2" + register "cio2_lanes_used" = "{2,2}" + register "cio2_lane_endpoint[0]" = ""^I2C5.CAM1"" + register "cio2_lane_endpoint[1]" = ""^I2C1.CAM0"" + register "cio2_prt[0]" = "2" + register "cio2_prt[1]" = "1" + device generic 0 on end + end + end + device ref pcie4_0 on end + device ref pcie4_1 on end + device ref tbt_pcie_rp0 on end + device ref tbt_pcie_rp1 on end + device ref tbt_pcie_rp2 on end + device ref tbt_pcie_rp3 on end + device ref crashlog off end + device ref tcss_xhci on end + device ref tcss_dma0 on end + device ref tcss_dma1 on end + device ref xhci on + chip drivers/usb/acpi + register "desc" = ""Root Hub"" + register "type" = "UPC_TYPE_HUB" + device ref xhci_root_hub on + chip drivers/usb/acpi + register "desc" = ""Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb2_port10 on end + end + end + end + end + device ref cnvi_wifi on + chip drivers/wifi/generic + register "wake" = "GPE0_PME_B0" + device generic 0 on end + end + end + device ref i2c0 on end + device ref i2c1 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTI5675"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM0"" + register "chip_name" = ""Ov 5675 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + register "ssdb.lanes_used" = "2" + register "ssdb.vcm_type" = "0x0C" + register "vcm_name" = ""VCM0"" + register "num_freq_entries" = "1" + register "link_freq[0]" = "450000000" + register "remote_name" = ""IPU0"" + + register "has_power_resource" = "1" + #Controls + register "clk_panel.clks[0].clknum" = "0" #IMGCLKOUT_0 + register "clk_panel.clks[0].freq" = "1" #19.2 Mhz + register "gpio_panel.gpio[0].gpio_num" = "GPP_B23" #power_enable + register "gpio_panel.gpio[1].gpio_num" = "GPP_R5" #reset + + #_ON + register "on_seq.ops_cnt" = "4" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 2)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 1)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 1)" + + #_OFF + register "off_seq.ops_cnt" = "3" + register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + device i2c 36 on end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "3" + register "acpi_name" = ""VCM0"" + register "chip_name" = ""DW AF VCM"" + register "device_type" = "INTEL_ACPI_CAMERA_VCM" + + register "pr0" = ""\_SB.PCI0.I2C1.CAM0.PRIC"" + register "vcm_compat" = ""dongwoon,dw9714"" + + device i2c 0C on end + end + end + device ref i2c2 on end + device ref i2c3 on end + device ref heci1 on end + device ref sata on end + device ref i2c5 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTI5675"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM1"" + register "chip_name" = ""Ov 5675 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + register "ssdb.lanes_used" = "2" + register "num_freq_entries" = "1" + register "link_freq[0]" = "450000000" + register "remote_name" = ""IPU0"" + + register "has_power_resource" = "1" + #Controls + register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1 + register "clk_panel.clks[0].freq" = "1" #19.2 Mhz + register "gpio_panel.gpio[0].gpio_num" = "GPP_E16" #power_enable + register "gpio_panel.gpio[1].gpio_num" = "GPP_E15" #reset + + #_ON + register "on_seq.ops_cnt" = "4" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 2)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 1)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 1)" + + #_OFF + register "off_seq.ops_cnt" = "3" + register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + device i2c 36 on end + end + end + device ref pcie_rp1 on end + device ref pcie_rp3 on end # W/A to FSP issue + device ref pcie_rp4 on end # W/A to FSP issue + device ref pcie_rp5 on end + device ref pcie_rp6 on end + device ref pcie_rp8 on end + device ref pcie_rp9 on end + device ref pcie_rp11 on end + device ref uart0 on end + device ref gspi0 on end + device ref p2sb on end + device ref hda on + chip drivers/intel/soundwire + device generic 0 on + chip drivers/soundwire/alc711 + # SoundWire Link 0 ID 1 + register "desc" = ""Headset Codec"" + device generic 0.1 on end + end + end + end + end + device ref smbus on end + end +end diff --git a/src/mainboard/intel/adlrvp/variants/adlrvp_n/overridetree.cb b/src/mainboard/intel/adlrvp/variants/adlrvp_n/overridetree.cb new file mode 100644 index 0000000..e58e9fb --- /dev/null +++ b/src/mainboard/intel/adlrvp/variants/adlrvp_n/overridetree.cb @@ -0,0 +1,4 @@ +chip soc/intel/alderlake + + device domain 0 on end +end diff --git a/src/mainboard/intel/adlrvp/variants/adlrvp_n_ext_ec/overridetree.cb b/src/mainboard/intel/adlrvp/variants/adlrvp_n_ext_ec/overridetree.cb new file mode 100644 index 0000000..e78d00f --- /dev/null +++ b/src/mainboard/intel/adlrvp/variants/adlrvp_n_ext_ec/overridetree.cb @@ -0,0 +1,61 @@ +chip soc/intel/alderlake + + device domain 0 on + device ref pch_espi on + chip ec/google/chromeec + use conn0 as mux_conn[0] + use conn1 as mux_conn[1] + use conn2 as mux_conn[2] + device pnp 0c09.0 on end + end + end + device ref tcss_xhci on + chip drivers/usb/acpi + register "type" = "UPC_TYPE_HUB" + device ref tcss_root_hub on + chip drivers/usb/acpi + register "desc" = ""TypeC Port 1"" + device ref tcss_usb3_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""TypeC Port 2"" + device ref tcss_usb3_port2 on end + end + chip drivers/usb/acpi + register "desc" = ""TypeC Port 3"" + device ref tcss_usb3_port3 on end + end + end + end + end + device ref pmc hidden + # The pmc_mux chip driver is a placeholder for the + # PMC.MUX device in the ACPI hierarchy. + chip drivers/intel/pmc_mux + device generic 0 on + chip drivers/intel/pmc_mux/conn + register "usb2_port_number" = "1" + register "usb3_port_number" = "1" + # SBU is fixed, HSL follows CC + register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL" + device generic 0 alias conn0 on end + end + chip drivers/intel/pmc_mux/conn + register "usb2_port_number" = "2" + register "usb3_port_number" = "2" + # SBU is fixed, HSL follows CC + register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL" + device generic 1 alias conn1 on end + end + chip drivers/intel/pmc_mux/conn + register "usb2_port_number" = "3" + register "usb3_port_number" = "3" + # SBU is fixed, HSL follows CC + register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL" + device generic 2 alias conn2 on end + end + end + end + end + end +end
-
Krishna P Bhat D (Code Review)