Change in coreboot[master]: soc/intel/apl: move UART pad config to boards

[Patrick Rudolph (Code Review)]

Patrick Rudolph has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/48800 )

Change subject: soc/intel/apl: move UART pad config to boards
......................................................................

Patch Set 9:

(1 comment)

https://review.coreboot.org/c/coreboot/+/48800/9/src/mainboard/up/squared/gp... 
File src/mainboard/up/squared/gpio.h:

https://review.coreboot.org/c/coreboot/+/48800/9/src/mainboard/up/squared/gp... 
PS9, Line 788: 	/* GPIO_38 - LPSS_UART0_RXD */
up squared has two serial ports, see https://wiki.up-community.org/Serial_console