Change in coreboot[master]: driver/i2c/sx9360: Add pre-charge resistance setting

[Gwendal Grignou (Code Review)]

Attention is currently required from: Gwendal Grignou.
Hello build bot (Jenkins), Tim Wawrzynczak,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/62842

to look at the new patch set (#3).

Change subject: driver/i2c/sx9360: Add pre-charge resistance setting
......................................................................

driver/i2c/sx9360: Add pre-charge resistance setting

Kernel driver supports ability to set the pre-charge resistance,
add entry in the coreboot driver.
[https://patchwork.ozlabs.org/project/devicetree-bindings/patch/2022032206250...]

Tested on bugzyy, check register 0x21 is configured properly.

Signed-off-by: Gwendal Grignou 
Change-Id: I197b88d92784015b94c836dc128bacf3f1ef5b62
---
M src/drivers/i2c/sx9360/chip.h
M src/drivers/i2c/sx9360/sx9360.c
2 files changed, 5 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/42/62842/3