[coreboot-gerrit] Change in coreboot[master]: mb/google/zork/dalboz: Increase eMMC initial clock frequency

[Rob Barnes (Code Review)]

Rob Barnes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/45935 )

Change subject: mb/google/zork/dalboz: Increase eMMC initial clock frequency
......................................................................

mb/google/zork/dalboz: Increase eMMC initial clock frequency

This will reduce boot time by 7ms. Some of the initial designs
don't have a pull-up resistor on the CMD line. These designs still boot
at 400 kHz despite not having the pull-up.

BUG=b:158766134
TEST=WIP

Signed-off-by: Rob Barnes 
Change-Id: I1191d73a2a3f72f99de187a946162460acbb287a
---
M src/mainboard/google/zork/variants/dalboz/overridetree.cb
1 file changed, 6 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/35/45935/1

diff --git a/src/mainboard/google/zork/variants/dalboz/overridetree.cb b/src/mainboard/google/zork/variants/dalboz/overridetree.cb
index 1ddb17b..e5608d9 100644
--- a/src/mainboard/google/zork/variants/dalboz/overridetree.cb
+++ b/src/mainboard/google/zork/variants/dalboz/overridetree.cb
@@ -37,6 +37,12 @@
    	.early_init = true,
    }"

+	register "emmc_config" = "{
+		.timing = SD_EMMC_EMMC_HS400,
+		.sdr104_hs400_driver_strength = SD_EMMC_DRIVE_STRENGTH_A,
+		.init_khz_preset = 400,
+	}"
+
    # See AMD 55570-B1 Table 13: PCI Device ID Assignments.
    device domain 0 on
    	subsystemid 0x1022 0x1510 inherit