[coreboot-gerrit] Change in coreboot[master]: soc/intel/bsw/gpio: Factor out GPI macros

[Angel Pons (Code Review)]

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37404 )

Change subject: soc/intel/bsw/gpio: Factor out GPI macros
......................................................................

soc/intel/bsw/gpio: Factor out GPI macros

This patch simplifies some GPIO macros by removing redundant code.
Also, for the sake of completeness, add two missing macros.

Change-Id: I838efe8b26f60d3e059f4ce18c116aefbc0b0400
Signed-off-by: Angel Pons 
---
M src/soc/intel/braswell/include/soc/gpio.h
1 file changed, 9 insertions(+), 22 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/04/37404/1

diff --git a/src/soc/intel/braswell/include/soc/gpio.h b/src/soc/intel/braswell/include/soc/gpio.h
index 2240ae1..24318c5 100644
--- a/src/soc/intel/braswell/include/soc/gpio.h
+++ b/src/soc/intel/braswell/include/soc/gpio.h
@@ -228,30 +228,17 @@
 #define PAD_CONFIG1_CSEN	0x0DC00000
 #define PAD_CONFIG1_DEFAULT1	0x05C00020

-#define GPIO_INPUT_NO_PULL \
-	{ .pad_conf0 = PAD_PULL_DISABLE | PAD_GPIO_ENABLE \
-		     | PAD_CONFIG0_GPI_DEFAULT, \
+#define GPIO_INPUT_PULL(pull) \
+	{ .pad_conf0 = pull | PAD_GPIO_ENABLE | PAD_CONFIG0_GPI_DEFAULT, \
      .pad_conf1 = PAD_CONFIG1_DEFAULT0 }

-#define GPIO_INPUT_PU_20K \
-	{ .pad_conf0 = PAD_PULL_UP_20K | PAD_GPIO_ENABLE \
-		     | PAD_CONFIG0_GPI_DEFAULT, \
-	  .pad_conf1 = PAD_CONFIG1_DEFAULT0 }
-
-#define GPIO_INPUT_PD_5K \
-	{ .pad_conf0 = PAD_PULL_DOWN_5K | PAD_GPIO_ENABLE \
-		     | PAD_CONFIG0_GPI_DEFAULT, \
-	  .pad_conf1 = PAD_CONFIG1_DEFAULT0 }
-
-#define GPIO_INPUT_PD_20K \
-	{ .pad_conf0 = PAD_PULL_DOWN_20K | PAD_GPIO_ENABLE \
-		     | PAD_CONFIG0_GPI_DEFAULT, \
-	  .pad_conf1 = PAD_CONFIG1_DEFAULT0 }
-
-#define GPIO_INPUT_PU_5K \
-	{ .pad_conf0 = PAD_PULL_UP_5K | PAD_GPIO_ENABLE \
-		     | PAD_CONFIG0_GPI_DEFAULT, \
-	  .pad_conf1 = PAD_CONFIG1_DEFAULT0 }
+#define GPIO_INPUT_NO_PULL	GPIO_INPUT_PULL(PAD_PULL_DISABLE)
+#define GPIO_INPUT_PU_20K	GPIO_INPUT_PULL(PAD_PULL_UP_20K)
+#define GPIO_INPUT_PU_5K	GPIO_INPUT_PULL(PAD_PULL_UP_5K)
+#define GPIO_INPUT_PU_1K	GPIO_INPUT_PULL(PAD_PULL_UP_1K)
+#define GPIO_INPUT_PD_20K	GPIO_INPUT_PULL(PAD_PULL_DOWN_20K)
+#define GPIO_INPUT_PD_5K	GPIO_INPUT_PULL(PAD_PULL_DOWN_5K)
+#define GPIO_INPUT_PD_1K	GPIO_INPUT_PULL(PAD_PULL_DOWN_1K)

#define GPI(int_type, int_sel, term, int_msk, glitch_cfg, wake_msk, gpe_val) { \
    .pad_conf0 = PAD_INT_SEL(int_sel) | PAD_GFCFG(glitch_cfg) \