Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/67102 )
(
2 is the latest approved patch-set. No files were changed between the latest approved patch-set and the submitted one. )Change subject: mb/siemens/mc_ehl2: Set I2C bus 1 speed to 100 kHz ......................................................................
mb/siemens/mc_ehl2: Set I2C bus 1 speed to 100 kHz
Since the new RTC is located in I2C bus 1 now, set the bus speed to 100 kHz as well.
Change-Id: Ica9468e559bc654545592a9b4d23f3164eafca8a Signed-off-by: Werner Zeh werner.zeh@siemens.com Reviewed-on: https://review.coreboot.org/c/coreboot/+/67102 Reviewed-by: Mario Scheithauer mario.scheithauer@siemens.com Tested-by: build bot (Jenkins) no-reply@coreboot.org --- M src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb 1 file changed, 19 insertions(+), 0 deletions(-)
Approvals: build bot (Jenkins): Verified Mario Scheithauer: Looks good to me, approved
diff --git a/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb b/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb index 78101d7..ecf5d55 100644 --- a/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb +++ b/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb @@ -109,6 +109,9 @@ register "pse_tsn_phy_irq_edge[1]" = "RISING_EDGE"
register "common_soc_config" = "{ + .i2c[1] = { + .speed = I2C_SPEED_STANDARD, + }, .i2c[2] = { .speed = I2C_SPEED_STANDARD, },