Marc Jones (marc.jones@se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4027
-gerrit
commit 2045ccef11bfed59c20433236285e66672bacd26 Author: Marc Jones marc.jones@se-eng.com Date: Tue Nov 5 17:47:37 2013 -0700
emeraldlake2: Clean up COM port enable
Remove the COM port enable loop. There is no need to search for the port when it is needed and known by the GPIO function.
Change-Id: Ie4e533fd9e49ed9ae62b209317b4b9853ff9926a Signed-off-by: Marc Jones marc.jones@se-eng.com --- src/mainboard/intel/emeraldlake2/romstage.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-)
diff --git a/src/mainboard/intel/emeraldlake2/romstage.c b/src/mainboard/intel/emeraldlake2/romstage.c index 7691116..363299d 100644 --- a/src/mainboard/intel/emeraldlake2/romstage.c +++ b/src/mainboard/intel/emeraldlake2/romstage.c @@ -42,31 +42,29 @@ #include <vendorcode/google/chromeos/chromeos.h> #endif
+#define SIO_PORT 0x164e + static void pch_enable_lpc(void) { device_t dev = PCH_LPC_DEV; - int i;
/* Set COM1/COM2 decode range */ pci_write_config16(dev, LPC_IO_DEC, 0x0010);
- /* Enable SuperIO + COM1 + PS/2 Keyboard/Mouse */ - u16 lpc_config = CNF1_LPC_EN | CNF2_LPC_EN | COMA_LPC_EN | KBC_LPC_EN; + /* Enable SuperIO + PS/2 Keyboard/Mouse */ + u16 lpc_config = CNF1_LPC_EN | CNF2_LPC_EN | KBC_LPC_EN; pci_write_config16(dev, LPC_EN, lpc_config);
/* Map 256 bytes at 0x1600 to the LPC bus. */ pci_write_config32(dev, LPC_GEN1_DEC, 0xfc1601);
- /* Map a range for the runtime registers to the LPC bus. */ + /* Map a range for the runtime_port registers to the LPC bus. */ pci_write_config32(dev, LPC_GEN2_DEC, 0xc0181);
- for (i = 0; i < ARRAY_SIZE(sio1007_lpc_ports); i++) { - if (sio1007_enable_uart_at(sio1007_lpc_ports[i])) { - /* Keep COMA UART enable bit on. */ - pci_write_config16(dev, LPC_EN, - lpc_config | COMA_LPC_EN); - break; - } + /* Enable COM1 */ + if (sio1007_enable_uart_at(SIO_PORT)) { + pci_write_config16(dev, LPC_EN, + lpc_config | COMA_LPC_EN); } }
@@ -132,7 +130,7 @@ static void early_pch_init(void)
static void setup_sio_gpios(void) { - const u16 port = 0x164e; + const u16 port = SIO_PORT; const u16 runtime_port = 0x180;
/* Turn on configuration mode. */