HAOUAS Elyes (ehaouas@noos.fr) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/6356
-gerrit
commit 238703b59aa01c515a857b87e4ba7b883dc65bae Author: Elyes HAOUAS ehaouas@noos.fr Date: Thu Jul 24 18:51:08 2014 +0200
devicetree.cb: Remove some trailing whitespace
Change-Id: I5601be1c4053020335bd29dc0f07c8d0daac1e97 Signed-off-by: Elyes HAOUAS ehaouas@noos.fr --- src/mainboard/advansus/a785e-i/devicetree.cb | 147 +++++---- src/mainboard/asi/mb_5blgp/devicetree.cb | 106 +++--- src/mainboard/asi/mb_5blmp/devicetree.cb | 90 +++--- src/mainboard/asus/a8n_e/devicetree.cb | 236 +++++++------- src/mainboard/asus/a8v-e_deluxe/devicetree.cb | 190 +++++------ src/mainboard/asus/a8v-e_se/devicetree.cb | 190 +++++------ src/mainboard/asus/dsbf/devicetree.cb | 64 ++-- src/mainboard/asus/f2a85-m/devicetree.cb | 80 ++--- src/mainboard/asus/k8v-x/devicetree.cb | 192 +++++------ src/mainboard/asus/m2n-e/devicetree.cb | 198 ++++++------ src/mainboard/asus/m2v-mx_se/devicetree.cb | 150 ++++----- src/mainboard/asus/m2v/devicetree.cb | 146 ++++----- src/mainboard/asus/m4a78-em/devicetree.cb | 81 +++-- src/mainboard/asus/m4a785-m/devicetree.cb | 82 ++--- src/mainboard/asus/m4a785t-m/devicetree.cb | 83 +++-- src/mainboard/asus/m5a88-v/devicetree.cb | 93 +++--- src/mainboard/asus/mew-am/devicetree.cb | 114 +++---- src/mainboard/asus/mew-vm/devicetree.cb | 34 +- src/mainboard/asus/p2b-d/devicetree.cb | 120 +++---- src/mainboard/asus/p2b-ds/devicetree.cb | 122 +++---- src/mainboard/asus/p2b-f/devicetree.cb | 114 +++---- src/mainboard/asus/p2b-ls/devicetree.cb | 114 +++---- src/mainboard/asus/p2b/devicetree.cb | 120 +++---- src/mainboard/asus/p3b-f/devicetree.cb | 114 +++---- src/mainboard/axus/tc320/devicetree.cb | 106 +++--- src/mainboard/azza/pt-6ibd/devicetree.cb | 114 +++---- src/mainboard/bachmann/ot200/devicetree.cb | 4 +- src/mainboard/broadcom/blast/devicetree.cb | 48 ++- .../compaq/deskpro_en_sff_p600/devicetree.cb | 122 +++---- src/mainboard/digitallogic/adl855pc/devicetree.cb | 50 +-- src/mainboard/digitallogic/msm800sev/devicetree.cb | 38 +-- src/mainboard/eaglelion/5bcm/devicetree.cb | 96 +++--- src/mainboard/gizmosphere/gizmo/devicetree.cb | 50 +-- src/mainboard/ibase/mb899/devicetree.cb | 12 +- src/mainboard/ibm/e325/devicetree.cb | 41 ++- src/mainboard/ibm/e326/devicetree.cb | 43 ++- src/mainboard/intel/d810e2cb/devicetree.cb | 118 +++---- src/mainboard/kontron/kt690/devicetree.cb | 78 ++--- src/mainboard/lanner/em8510/devicetree.cb | 52 +-- src/mainboard/lenovo/t520/devicetree.cb | 8 +- src/mainboard/lenovo/t530/devicetree.cb | 8 +- src/mainboard/lenovo/t60/devicetree.cb | 8 +- src/mainboard/lenovo/x201/devicetree.cb | 8 +- src/mainboard/lenovo/x230/devicetree.cb | 8 +- src/mainboard/lenovo/x60/devicetree.cb | 8 +- src/mainboard/lippert/frontrunner-af/devicetree.cb | 10 +- src/mainboard/lippert/toucan-af/devicetree.cb | 12 +- src/mainboard/mitac/6513wu/devicetree.cb | 122 +++---- src/mainboard/msi/ms6119/devicetree.cb | 116 +++---- src/mainboard/msi/ms6147/devicetree.cb | 116 +++---- src/mainboard/msi/ms6178/devicetree.cb | 120 +++---- src/mainboard/msi/ms7260/devicetree.cb | 282 ++++++++-------- src/mainboard/msi/ms9185/devicetree.cb | 72 ++--- src/mainboard/msi/ms9652_fam10/devicetree.cb | 288 ++++++++--------- src/mainboard/nec/powermate2000/devicetree.cb | 102 +++--- src/mainboard/newisys/khepri/devicetree.cb | 55 ++-- src/mainboard/nvidia/l1_2pvv/devicetree.cb | 356 ++++++++++----------- src/mainboard/packardbell/ms2290/devicetree.cb | 6 +- src/mainboard/rca/rm4100/devicetree.cb | 129 ++++---- src/mainboard/soyo/sy-6ba-plus-iii/devicetree.cb | 102 +++--- src/mainboard/supermicro/h8dme/devicetree.cb | 248 +++++++------- src/mainboard/supermicro/h8dmr/devicetree.cb | 288 ++++++++--------- src/mainboard/supermicro/h8dmr_fam10/devicetree.cb | 300 ++++++++--------- src/mainboard/supermicro/h8qme_fam10/devicetree.cb | 226 ++++++------- src/mainboard/supermicro/h8scm/devicetree.cb | 107 +++---- src/mainboard/supermicro/x6dhe_g/devicetree.cb | 26 +- src/mainboard/supermicro/x6dhe_g2/devicetree.cb | 26 +- src/mainboard/supermicro/x6dhr_ig/devicetree.cb | 13 +- src/mainboard/supermicro/x6dhr_ig2/devicetree.cb | 9 +- src/mainboard/tyan/s1846/devicetree.cb | 106 +++--- src/mainboard/tyan/s2850/devicetree.cb | 116 ++++--- src/mainboard/tyan/s2875/devicetree.cb | 47 ++- src/mainboard/tyan/s2880/devicetree.cb | 106 +++--- src/mainboard/tyan/s2881/devicetree.cb | 255 ++++++++------- src/mainboard/tyan/s2882/devicetree.cb | 155 +++++---- src/mainboard/tyan/s2885/devicetree.cb | 127 ++++---- src/mainboard/tyan/s2891/devicetree.cb | 270 ++++++++-------- src/mainboard/tyan/s2892/devicetree.cb | 276 ++++++++-------- src/mainboard/tyan/s2895/devicetree.cb | 302 ++++++++--------- src/mainboard/tyan/s2912/devicetree.cb | 272 ++++++++-------- src/mainboard/tyan/s2912_fam10/devicetree.cb | 278 ++++++++-------- src/mainboard/tyan/s4880/devicetree.cb | 107 +++---- src/mainboard/tyan/s4882/devicetree.cb | 290 +++++++++-------- src/mainboard/tyan/s8226/devicetree.cb | 100 +++--- src/mainboard/via/epia-cn/devicetree.cb | 118 +++---- src/mainboard/via/epia-m/devicetree.cb | 12 +- src/mainboard/via/epia-m700/devicetree.cb | 44 +-- src/mainboard/via/epia-m850/devicetree.cb | 38 +-- src/mainboard/via/epia-n/devicetree.cb | 152 ++++----- src/mainboard/via/epia/devicetree.cb | 72 ++--- src/mainboard/via/pc2500e/devicetree.cb | 174 +++++----- src/mainboard/via/vt8454c/devicetree.cb | 35 +- src/mainboard/winent/mb6047/devicetree.cb | 236 +++++++------- src/mainboard/winent/pl6064/devicetree.cb | 4 +- 94 files changed, 5392 insertions(+), 5431 deletions(-)
diff --git a/src/mainboard/advansus/a785e-i/devicetree.cb b/src/mainboard/advansus/a785e-i/devicetree.cb index f7db1cc..fa5b2b5 100644 --- a/src/mainboard/advansus/a785e-i/devicetree.cb +++ b/src/mainboard/advansus/a785e-i/devicetree.cb @@ -1,26 +1,26 @@ # sample config for advansus/A785E-I chip northbridge/amd/amdfam10/root_complex device cpu_cluster 0 on - chip cpu/amd/socket_ASB2 #L1 and DDR3 - device lapic 0 on end + chip cpu/amd/socket_ASB2 #L1 and DDR3 + device lapic 0 on end end end device domain 0 on subsystemid 0x1612 0x3060 inherit #TODO: Set the correctly subsystem id. chip northbridge/amd/amdfam10 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on end # Internal Graphics P2P bridge 0x9712 - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 - device pci 3.0 off end # PCIE P2P bridge 0x960b - device pci 4.0 on end # PCIE P2P bridge 0x9604 wireless - device pci 5.0 off end # PCIE P2P bridge 0x9605 - device pci 6.0 off end # PCIE P2P bridge 0x9606 - device pci 7.0 off end # PCIE P2P bridge 0x9607 - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 on end # Ethernet - device pci a.0 on end # Ethernet + device pci 0.0 on end # HT 0x9600 + device pci 1.0 on end # Internal Graphics P2P bridge 0x9712 + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 + device pci 3.0 off end # PCIE P2P bridge 0x960b + device pci 4.0 on end # PCIE P2P bridge 0x9604 wireless + device pci 5.0 off end # PCIE P2P bridge 0x9605 + device pci 6.0 off end # PCIE P2P bridge 0x9606 + device pci 7.0 off end # PCIE P2P bridge 0x9607 + device pci 8.0 off end # NB/SB Link P2P bridge + device pci 9.0 on end # Ethernet + device pci a.0 on end # Ethernet register "gppsb_configuration" = "4" # Configuration E register "gpp_configuration" = "3" # Configuration D register "port_enable" = "0x6f6" @@ -31,8 +31,8 @@ chip northbridge/amd/amdfam10/root_complex register "gfx_reconfiguration" = "1" register "gfx_link_width" = "0" register "gfx_tmds" = "1" - register "gfx_pcie_config" = "3" # 1x8 GFX on Lanes 8-15 - register "gfx_ddi_config" = "1" # Lanes 0-3 DDI_SL + register "gfx_pcie_config" = "3" # 1x8 GFX on Lanes 8-15 + register "gfx_ddi_config" = "1" # Lanes 0-3 DDI_SL end chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pci bus device pci 11.0 on end # SATA @@ -40,7 +40,7 @@ chip northbridge/amd/amdfam10/root_complex device pci 12.2 on end # USB device pci 13.0 on end # USB device pci 13.2 on end # USB - device pci 14.0 on # SM + device pci 14.0 on # SM chip drivers/generic/generic #dimm 0-0-0 device i2c 50 on end end @@ -54,67 +54,66 @@ chip northbridge/amd/amdfam10/root_complex device i2c 53 on end end end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 device pci 14.3 on - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO_GAME_MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO_PLED - device pnp 2e.9 off end # GPIO_SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end #superio/winbond/w83627hf + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO_GAME_MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO_SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end #superio/winbond/w83627hf end # LPC 0x439d - device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 on end # USB 2 - device pci 14.6 off end # Gec - device pci 15.0 on end # PCIe 0 - device pci 15.1 on end # PCIe 1 - device pci 15.2 on end # PCIe 2 - device pci 15.3 on end # PCIe 3 - device pci 16.0 on end # USB - device pci 16.2 on end # USB - #register "gpp_configuration" = "0" #4:0:0:0 - #register "gpp_configuration" = "2" #2:2:0:0 - #register "gpp_configuration" = "3" #2:1:1:0 - register "gpp_configuration" = "4" #1:1:1:1 + device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} + device pci 14.5 on end # USB 2 + device pci 14.6 off end # Gec + device pci 15.0 on end # PCIe 0 + device pci 15.1 on end # PCIe 1 + device pci 15.2 on end # PCIe 2 + device pci 15.3 on end # PCIe 3 + device pci 16.0 on end # USB + device pci 16.2 on end # USB + #register "gpp_configuration" = "0" #4:0:0:0 + #register "gpp_configuration" = "2" #2:2:0:0 + #register "gpp_configuration" = "3" #2:1:1:0 + register "gpp_configuration" = "4" #1:1:1:1 register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE end #southbridge/amd/cimx/sb800 - end # device pci 18.0 - + end # device pci 18.0 device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end diff --git a/src/mainboard/asi/mb_5blgp/devicetree.cb b/src/mainboard/asi/mb_5blgp/devicetree.cb index d84bf0e..40856b1 100644 --- a/src/mainboard/asi/mb_5blgp/devicetree.cb +++ b/src/mainboard/asi/mb_5blgp/devicetree.cb @@ -1,55 +1,55 @@ chip northbridge/amd/gx1 # Northbridge - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - chip southbridge/amd/cs5530 # Southbridge - device pci 0f.0 on end # Ethernet - device pci 12.0 on # ISA bridge - chip superio/nsc/pc87351 # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.e on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.4 on # System wake-up control (SWC) - irq 0x60 = 0x500 - end - device pnp 2e.5 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.6 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.7 on # GPIO - irq 0x60 = 0x800 - end - device pnp 2e.8 on # Fan speed control - irq 0x60 = 0x900 - end - end - end - device pci 12.1 off end # SMI - device pci 12.2 on end # IDE - device pci 12.3 on end # Audio - device pci 12.4 on end # VGA - device pci 13.0 on end # USB - register "ide0_enable" = "1" - register "ide1_enable" = "0" # No connector on this board - end - end - chip cpu/amd/geode_gx1 # CPU - end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + chip southbridge/amd/cs5530 # Southbridge + device pci 0f.0 on end # Ethernet + device pci 12.0 on # ISA bridge + chip superio/nsc/pc87351 # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.e on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 on # System wake-up control (SWC) + irq 0x60 = 0x500 + end + device pnp 2e.5 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.6 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.7 on # GPIO + irq 0x60 = 0x800 + end + device pnp 2e.8 on # Fan speed control + irq 0x60 = 0x900 + end + end + end + device pci 12.1 off end # SMI + device pci 12.2 on end # IDE + device pci 12.3 on end # Audio + device pci 12.4 on end # VGA + device pci 13.0 on end # USB + register "ide0_enable" = "1" + register "ide1_enable" = "0" # No connector on this board + end + end + chip cpu/amd/geode_gx1 # CPU + end end diff --git a/src/mainboard/asi/mb_5blmp/devicetree.cb b/src/mainboard/asi/mb_5blmp/devicetree.cb index e8e6ac3..055ab15 100644 --- a/src/mainboard/asi/mb_5blmp/devicetree.cb +++ b/src/mainboard/asi/mb_5blmp/devicetree.cb @@ -1,48 +1,48 @@ chip northbridge/amd/gx1 # Northbridge - device domain 0 on - device pci 0.0 on end # Host bridge - chip southbridge/amd/cs5530 # Southbridge - device pci 0f.0 off end # Ethernet (Realtek RTL8139B) - device pci 12.0 on # ISA bridge - chip superio/nsc/pc87351 # Super I/O - device pnp 2e.4 on # PS/2 keyboard (+ mouse?) - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - # irq 0x72 = 12 - end - device pnp 2e.a on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.e on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.f off # Floppy - io 0x60 = 0x3f2 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.10 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.12 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - end - end - device pci 12.1 off end # SMI - device pci 12.2 on end # IDE - device pci 12.3 on end # Audio - device pci 12.4 on end # VGA (onboard) - device pci 13.0 on end # USB - register "ide0_enable" = "1" - register "ide1_enable" = "1" - end - end - chip cpu/amd/geode_gx1 # CPU - end + device domain 0 on + device pci 0.0 on end # Host bridge + chip southbridge/amd/cs5530 # Southbridge + device pci 0f.0 off end # Ethernet (Realtek RTL8139B) + device pci 12.0 on # ISA bridge + chip superio/nsc/pc87351 # Super I/O + device pnp 2e.4 on # PS/2 keyboard (+ mouse?) + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + # irq 0x72 = 12 + end + device pnp 2e.a on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.e on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.f off # Floppy + io 0x60 = 0x3f2 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.10 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.12 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + end + end + device pci 12.1 off end # SMI + device pci 12.2 on end # IDE + device pci 12.3 on end # Audio + device pci 12.4 on end # VGA (onboard) + device pci 13.0 on end # USB + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end + chip cpu/amd/geode_gx1 # CPU + end end
diff --git a/src/mainboard/asus/a8n_e/devicetree.cb b/src/mainboard/asus/a8n_e/devicetree.cb index bbbfeb8..a36093b 100644 --- a/src/mainboard/asus/a8n_e/devicetree.cb +++ b/src/mainboard/asus/a8n_e/devicetree.cb @@ -1,121 +1,121 @@ chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_939 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_939 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end
- device domain 0 on # PCI domain - subsystemid 0x1043 0x815a inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/ck804 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/ite/it8712f # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 (N/A on this board) - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.4 on # Environment controller - io 0x60 = 0x290 - io 0x62 = 0x0000 - irq 0x70 = 0x00 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x71 = 2 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - irq 0x71 = 2 - end - device pnp 2e.7 on # GPIO config - io 0x60 = 0x0800 - io 0x62 = 0x0808 - io 0x64 = 0x0810 - # Set GPIO 1 & 2 - io 0x25 = 0x0000 - # Set GPIO 3 & 4 - io 0x27 = 0x2540 - # GPIO Polarity for Set 3 - io 0xb2 = 0x2100 - # GPIO Pin Internal Pull up for Set 3 - io 0xba = 0x0100 - # Simple I/O register config - io 0xc0 = 0x0000 - io 0xc2 = 0x2540 - io 0xc8 = 0x0000 - io 0xca = 0x0500 - end - device pnp 2e.8 on # MIDI port - io 0x60 = 0x300 - irq 0x70 = 10 - end - device pnp 2e.9 on # Game port - io 0x60 = 0x201 - end - device pnp 2e.a off # IR (N/A on this board) - io 0x60 = 0x310 - irq 0x70 = 11 - end - end - end - device pci 1.1 on # SM 0 - # chip drivers/generic/generic # DIMM 0-0-0 - # device i2c 50 on end - # end - # chip drivers/generic/generic # DIMM 0-0-1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # DIMM 0-1-0 - # device i2c 52 on end - # end - # chip drivers/generic/generic # DIMM 0-1-1 - # device i2c 53 on end - # end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # Onboard audio (ACI) - device pci 4.1 off end # Onboard modem (MCI), N/A - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 1 - device pci 8.0 on end # SATA 0 - device pci 9.0 on end # PCI - device pci a.0 on end # NIC - device pci b.0 on end # PCI E 3 - device pci c.0 on end # PCI E 2 - device pci d.0 on end # PCI E 1 - device pci e.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # TODO - # register "mac_eeprom_smbus" = "3" - # register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end + device domain 0 on # PCI domain + subsystemid 0x1043 0x815a inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/ck804 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/ite/it8712f # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 (N/A on this board) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.4 on # Environment controller + io 0x60 = 0x290 + io 0x62 = 0x0000 + irq 0x70 = 0x00 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x71 = 2 + end + device pnp 2e.6 on # PS/2 mouse + irq 0x70 = 12 + irq 0x71 = 2 + end + device pnp 2e.7 on # GPIO config + io 0x60 = 0x0800 + io 0x62 = 0x0808 + io 0x64 = 0x0810 + # Set GPIO 1 & 2 + io 0x25 = 0x0000 + # Set GPIO 3 & 4 + io 0x27 = 0x2540 + # GPIO Polarity for Set 3 + io 0xb2 = 0x2100 + # GPIO Pin Internal Pull up for Set 3 + io 0xba = 0x0100 + # Simple I/O register config + io 0xc0 = 0x0000 + io 0xc2 = 0x2540 + io 0xc8 = 0x0000 + io 0xca = 0x0500 + end + device pnp 2e.8 on # MIDI port + io 0x60 = 0x300 + irq 0x70 = 10 + end + device pnp 2e.9 on # Game port + io 0x60 = 0x201 + end + device pnp 2e.a off # IR (N/A on this board) + io 0x60 = 0x310 + irq 0x70 = 11 + end + end + end + device pci 1.1 on # SM 0 + # chip drivers/generic/generic # DIMM 0-0-0 + # device i2c 50 on end + # end + # chip drivers/generic/generic # DIMM 0-0-1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # DIMM 0-1-0 + # device i2c 52 on end + # end + # chip drivers/generic/generic # DIMM 0-1-1 + # device i2c 53 on end + # end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # Onboard audio (ACI) + device pci 4.1 off end # Onboard modem (MCI), N/A + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on end # PCI + device pci a.0 on end # NIC + device pci b.0 on end # PCI E 3 + device pci c.0 on end # PCI E 2 + device pci d.0 on end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # TODO + # register "mac_eeprom_smbus" = "3" + # register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end end diff --git a/src/mainboard/asus/a8v-e_deluxe/devicetree.cb b/src/mainboard/asus/a8v-e_deluxe/devicetree.cb index 5e56acc..5de370d 100644 --- a/src/mainboard/asus/a8v-e_deluxe/devicetree.cb +++ b/src/mainboard/asus/a8v-e_deluxe/devicetree.cb @@ -1,97 +1,97 @@ chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # APIC cluster - chip cpu/amd/socket_939 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - subsystemid 1043 0 inherit - chip northbridge/amd/amdk8 # mc0 - device pci 18.0 on # Northbridge - # Devices on link 0, link 0 == LDT 0 - chip southbridge/via/vt8237r # Southbridge - register "ide0_enable" = "1" # Enable IDE channel 0 - register "ide1_enable" = "1" # Enable IDE channel 1 - register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 - register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 - register "fn_ctrl_lo" = "0" # Enable SB functions - register "fn_ctrl_hi" = "0xad" # Enable SB functions - device pci 0.0 on end # HT - device pci f.1 on end # IDE - device pci 11.0 on # LPC - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip superio/winbond/w83627ehg # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 (N/A on this board) - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 off # PS/2 keyboard & mouse (off) - end - device pnp 2e.106 off # Serial flash interface (SFI) - io 0x60 = 0x100 - end - device pnp 2e.007 off # GPIO 1 - end - device pnp 2e.107 on # Game port - io 0x60 = 0x201 - end - device pnp 2e.207 on # MIDI - io 0x62 = 0x330 - irq 0x70 = 0xa - end - device pnp 2e.307 off # GPIO 6 - end - device pnp 2e.8 off # WDTO#, PLED - end - device pnp 2e.009 on # GPIO 2 - end - device pnp 2e.109 off # GPIO 3 - end - device pnp 2e.209 off # GPIO 4 - end - device pnp 2e.309 on # GPIO 5 - end - device pnp 2e.a off # ACPI - end - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 0 - end - end - end - device pci 12.0 off end # VIA LAN (off, other chip used) - end - chip southbridge/via/k8t890 # "Southbridge" K8T890 - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end + device cpu_cluster 0 on # APIC cluster + chip cpu/amd/socket_939 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + subsystemid 1043 0 inherit + chip northbridge/amd/amdk8 # mc0 + device pci 18.0 on # Northbridge + # Devices on link 0, link 0 == LDT 0 + chip southbridge/via/vt8237r # Southbridge + register "ide0_enable" = "1" # Enable IDE channel 0 + register "ide1_enable" = "1" # Enable IDE channel 1 + register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 + register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 + register "fn_ctrl_lo" = "0" # Enable SB functions + register "fn_ctrl_hi" = "0xad" # Enable SB functions + device pci 0.0 on end # HT + device pci f.1 on end # IDE + device pci 11.0 on # LPC + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip superio/winbond/w83627ehg # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 (N/A on this board) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 off # PS/2 keyboard & mouse (off) + end + device pnp 2e.106 off # Serial flash interface (SFI) + io 0x60 = 0x100 + end + device pnp 2e.007 off # GPIO 1 + end + device pnp 2e.107 on # Game port + io 0x60 = 0x201 + end + device pnp 2e.207 on # MIDI + io 0x62 = 0x330 + irq 0x70 = 0xa + end + device pnp 2e.307 off # GPIO 6 + end + device pnp 2e.8 off # WDTO#, PLED + end + device pnp 2e.009 on # GPIO 2 + end + device pnp 2e.109 off # GPIO 3 + end + device pnp 2e.209 off # GPIO 4 + end + device pnp 2e.309 on # GPIO 5 + end + device pnp 2e.a off # ACPI + end + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 0 + end + end + end + device pci 12.0 off end # VIA LAN (off, other chip used) + end + chip southbridge/via/k8t890 # "Southbridge" K8T890 + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end end diff --git a/src/mainboard/asus/a8v-e_se/devicetree.cb b/src/mainboard/asus/a8v-e_se/devicetree.cb index f2d078a..98ddca9 100644 --- a/src/mainboard/asus/a8v-e_se/devicetree.cb +++ b/src/mainboard/asus/a8v-e_se/devicetree.cb @@ -1,97 +1,97 @@ chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # APIC cluster - chip cpu/amd/socket_939 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - subsystemid 0x1043 0 inherit - chip northbridge/amd/amdk8 # mc0 - device pci 18.0 on # Northbridge - # Devices on link 0, link 0 == LDT 0 - chip southbridge/via/vt8237r # Southbridge - register "ide0_enable" = "1" # Enable IDE channel 0 - register "ide1_enable" = "1" # Enable IDE channel 1 - register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 - register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 - register "fn_ctrl_lo" = "0" # Enable SB functions - register "fn_ctrl_hi" = "0xad" # Enable SB functions - device pci 0.0 on end # HT - device pci f.1 on end # IDE - device pci 11.0 on # LPC - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip superio/winbond/w83627ehg # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 (N/A on this board) - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 off # PS/2 keyboard & mouse (off) - end - device pnp 2e.106 off # Serial flash interface (SFI) - io 0x60 = 0x100 - end - device pnp 2e.007 off # GPIO 1 - end - device pnp 2e.107 on # Game port - io 0x60 = 0x201 - end - device pnp 2e.207 on # MIDI - io 0x62 = 0x330 - irq 0x70 = 0xa - end - device pnp 2e.307 off # GPIO 6 - end - device pnp 2e.8 off # WDTO#, PLED - end - device pnp 2e.009 on # GPIO 2 - end - device pnp 2e.109 off # GPIO 3 - end - device pnp 2e.209 off # GPIO 4 - end - device pnp 2e.309 on # GPIO 5 - end - device pnp 2e.a off # ACPI - end - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 0 - end - end - end - device pci 12.0 off end # VIA LAN (off, other chip used) - end - chip southbridge/via/k8t890 # "Southbridge" K8T890 - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end + device cpu_cluster 0 on # APIC cluster + chip cpu/amd/socket_939 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + subsystemid 0x1043 0 inherit + chip northbridge/amd/amdk8 # mc0 + device pci 18.0 on # Northbridge + # Devices on link 0, link 0 == LDT 0 + chip southbridge/via/vt8237r # Southbridge + register "ide0_enable" = "1" # Enable IDE channel 0 + register "ide1_enable" = "1" # Enable IDE channel 1 + register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 + register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 + register "fn_ctrl_lo" = "0" # Enable SB functions + register "fn_ctrl_hi" = "0xad" # Enable SB functions + device pci 0.0 on end # HT + device pci f.1 on end # IDE + device pci 11.0 on # LPC + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip superio/winbond/w83627ehg # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 (N/A on this board) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 off # PS/2 keyboard & mouse (off) + end + device pnp 2e.106 off # Serial flash interface (SFI) + io 0x60 = 0x100 + end + device pnp 2e.007 off # GPIO 1 + end + device pnp 2e.107 on # Game port + io 0x60 = 0x201 + end + device pnp 2e.207 on # MIDI + io 0x62 = 0x330 + irq 0x70 = 0xa + end + device pnp 2e.307 off # GPIO 6 + end + device pnp 2e.8 off # WDTO#, PLED + end + device pnp 2e.009 on # GPIO 2 + end + device pnp 2e.109 off # GPIO 3 + end + device pnp 2e.209 off # GPIO 4 + end + device pnp 2e.309 on # GPIO 5 + end + device pnp 2e.a off # ACPI + end + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 0 + end + end + end + device pci 12.0 off end # VIA LAN (off, other chip used) + end + chip southbridge/via/k8t890 # "Southbridge" K8T890 + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end end diff --git a/src/mainboard/asus/dsbf/devicetree.cb b/src/mainboard/asus/dsbf/devicetree.cb index b4d1b63..cfd2f6f 100644 --- a/src/mainboard/asus/dsbf/devicetree.cb +++ b/src/mainboard/asus/dsbf/devicetree.cb @@ -41,10 +41,10 @@ chip northbridge/intel/i5000 device pci 00.0 on # PCI Express Upstream Port device pci 00.0 on # PCI Express Downstream Port E1 device pci 00.0 on # 6700PXH PCI Express-to-PCI Bridge A - ioapic_irq 8 INTA 0x11 - ioapic_irq 8 INTB 0x10 - ioapic_irq 8 INTC 0x11 - ioapic_irq 8 INTD 0x10 + ioapic_irq 8 INTA 0x11 + ioapic_irq 8 INTB 0x10 + ioapic_irq 8 INTC 0x11 + ioapic_irq 8 INTD 0x10 # PCI slot device pci 00.2 on # 6700PXH PCI Express-to-PCI Bridge B # PCI slot @@ -57,26 +57,26 @@ chip northbridge/intel/i5000 ioapic_irq 9 INTB 0 ioapic_irq 9 INTC 1 ioapic_irq 9 INTD 2 - # PCI-X Slot + # PCI-X Slot end
end end
device pci 03.0 on - ioapic_irq 8 INTA 0x10 + ioapic_irq 8 INTA 0x10 end device pci 04.0 on - ioapic_irq 8 INTA 0x10 + ioapic_irq 8 INTA 0x10 end device pci 05.0 on - ioapic_irq 8 INTA 0x10 + ioapic_irq 8 INTA 0x10 end device pci 06.0 on - ioapic_irq 8 INTA 0x10 + ioapic_irq 8 INTA 0x10 end device pci 07.0 on - ioapic_irq 8 INTA 0x10 + ioapic_irq 8 INTA 0x10 end
device pci 10.0 on end # FBD @@ -88,17 +88,17 @@ chip northbridge/intel/i5000 device pci 16.0 on end # FBD
chip drivers/generic/ioapic - register "have_isa_interrupts" = "1" - register "irq_on_fsb" = "1" - register "enable_virtual_wire" = "1" - register "base" = "0xfec00000" - device ioapic 8 on end + register "have_isa_interrupts" = "1" + register "irq_on_fsb" = "1" + register "enable_virtual_wire" = "1" + register "base" = "0xfec00000" + device ioapic 8 on end end
chip drivers/generic/ioapic - register "irq_on_fsb" = "1" - register "base" = "0xfec80000" - device ioapic 9 on end + register "irq_on_fsb" = "1" + register "base" = "0xfec80000" + device ioapic 9 on end end
chip southbridge/intel/i3100 @@ -132,30 +132,30 @@ chip northbridge/intel/i5000 device pci 1f.0 on # PCI-LPC bridge ioapic_irq 8 INTA 0x11 chip superio/winbond/w83627hf - device pnp 2e.0 off end # FDC - device pnp 2e.1 on # Parallel Port + device pnp 2e.0 off end # FDC + device pnp 2e.1 on # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 end - device pnp 2e.2 on # Serial Port 1 + device pnp 2e.2 on # Serial Port 1 io 0x60 = 0x3f8 irq 0x70 = 4 end
device pnp 2e.3 off end - device pnp 2e.5 on # KBC - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 + device pnp 2e.5 on # KBC + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 end
- device pnp 2e.6 off end # CIR - device pnp 2e.7 off end # Game port / MIDI - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 on end # GPIO3 - device pnp 2e.a on end # ACPI - device pnp 2e.b off end # HWMON + device pnp 2e.6 off end # CIR + device pnp 2e.7 off end # Game port / MIDI + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 on end # GPIO3 + device pnp 2e.a on end # ACPI + device pnp 2e.b off end # HWMON end end device pci 1f.1 off end # IDE diff --git a/src/mainboard/asus/f2a85-m/devicetree.cb b/src/mainboard/asus/f2a85-m/devicetree.cb index 9ac5574..5e28de9 100644 --- a/src/mainboard/asus/f2a85-m/devicetree.cb +++ b/src/mainboard/asus/f2a85-m/devicetree.cb @@ -29,27 +29,27 @@ chip northbridge/amd/agesa/family15tn/root_complex chip northbridge/amd/agesa/family15tn # CPU side of HT root complex
chip northbridge/amd/agesa/family15tn # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x99XX - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIE SLOT0 x16 blue - device pci 3.0 off end # unused? - device pci 4.0 on end # PCIE 4x black - device pci 5.0 off end # unused? - device pci 6.0 off end # unused? - device pci 7.0 off end # LAN - device pci 8.0 off end # NB/SB Link P2P bridge + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x99XX + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIE SLOT0 x16 blue + device pci 3.0 off end # unused? + device pci 4.0 on end # PCIE 4x black + device pci 5.0 off end # unused? + device pci 6.0 off end # unused? + device pci 7.0 off end # LAN + device pci 8.0 off end # NB/SB Link P2P bridge end #chip northbridge/amd/agesa/family15tn # PCI side of HT root complex
chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 - device pci 10.1 on end # XHCI HC1 - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SMBUS + device pci 10.0 on end # XHCI HC0 + device pci 10.1 on end # XHCI HC1 + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SMBUS chip drivers/generic/generic #dimm 0 device i2c 50 on end # 7-bit SPD address end @@ -57,9 +57,9 @@ chip northbridge/amd/agesa/family15tn/root_complex device i2c 51 on end # 7-bit SPD address end end # SM - device pci 14.1 off end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d + device pci 14.1 off end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d chip superio/ite/it8728f register hwm_ctl_register = "0xc0" register hwm_main_ctl_register = "0x33" @@ -68,54 +68,54 @@ chip northbridge/amd/agesa/family15tn/root_complex register hwm_fan2_ctl_pwm = "0x00" register hwm_fan3_ctl_pwm = "0x00"
- device pnp 2e.0 off # Floppy + device pnp 2e.0 off # Floppy io 0x60 = 0x3f0 irq 0x70 = 6 drq 0x74 = 2 end - device pnp 2e.1 on # Com1 + device pnp 2e.1 on # Com1 io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.2 off # Com2 + device pnp 2e.2 off # Com2 io 0x60 = 0x2f8 irq 0x70 = 3 end - device pnp 2e.3 off # Parallel Port + device pnp 2e.3 off # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 end - device pnp 2e.4 on # Env Controller + device pnp 2e.4 on # Env Controller io 0x60 = 0x290 io 0x62 = 0x220 irq 0x70 = 0 end - device pnp 2e.5 on # Keyboard + device pnp 2e.5 on # Keyboard io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 end - device pnp 2e.6 off # Mouse + device pnp 2e.6 off # Mouse irq 0x70 = 12 end - device pnp 2e.7 on # GPIO - io 0x60 = 0x228 #SMI - io 0x62 = 0x300 #Simple I/O - io 0x64 = 0x238 #Phony resource IT8603E does not have it + device pnp 2e.7 on # GPIO + io 0x60 = 0x228 #SMI + io 0x62 = 0x300 #Simple I/O + io 0x64 = 0x238 #Phony resource IT8603E does not have it irq 0x70 = 0 end - device pnp 2e.a off end # CIR + device pnp 2e.a off end # CIR end #superio/ite/it8728f end #device pci 14.3 # LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # USB 2 - device pci 14.6 off end # Gec + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # USB 2 + device pci 14.6 off end # Gec # SD, make it on so the BAR is assigned (if proper hudson on/off handling is implemented this may go away) device pci 14.7 on end - device pci 15.0 on end # PCIe 0 - onboard PCIe 1x - device pci 15.1 on end # PCIe 1 onboard gigabit - device pci 15.2 off end # unused - device pci 15.3 off end # unused + device pci 15.0 on end # PCIe 0 - onboard PCIe 1x + device pci 15.1 on end # PCIe 1 onboard gigabit + device pci 15.2 off end # unused + device pci 15.3 off end # unused
register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE register "gpp_configuration" = "4" diff --git a/src/mainboard/asus/k8v-x/devicetree.cb b/src/mainboard/asus/k8v-x/devicetree.cb index 6bb9bc8..b50c8a5 100644 --- a/src/mainboard/asus/k8v-x/devicetree.cb +++ b/src/mainboard/asus/k8v-x/devicetree.cb @@ -1,98 +1,98 @@ chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # APIC cluster - chip cpu/amd/socket_754 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - subsystemid 0x1043 0 inherit - chip northbridge/amd/amdk8 # mc0 - device pci 18.0 on # Northbridge - # Devices on link 0, link 0 == LDT 0 - chip southbridge/via/vt8237r # Southbridge - register "ide0_enable" = "1" # Enable IDE channel 0 - register "ide1_enable" = "1" # Enable IDE channel 1 - register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 - register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 - register "fn_ctrl_lo" = "0" # Enable SB functions - register "fn_ctrl_hi" = "0xad" # Enable SB functions - register "usb2_termination_set" = "1" - register "usb2_termination_a" = "8" - register "usb2_termination_b" = "8" - register "usb2_termination_c" = "6" - register "usb2_termination_d" = "6" - register "usb2_termination_e" = "6" - register "usb2_termination_f" = "6" - register "usb2_termination_g" = "6" - register "usb2_termination_h" = "6" - register "usb2_dpll_set" = "1" - register "usb2_dpll_delay" = "3" - register "int_efgh_as_gpio" = "1" - register "enable_gpo3" = "1" - register "disable_gpo26_gpo27" = "1" - register "enable_aol_2_smb_slave" = "1" - register "enable_gpo5" = "1" - register "gpio15_12_dir_output" = "1" - device pci 0.0 on end # HT - device pci f.1 on end # IDE - device pci 10.4 on end # USB2 - device pci 11.0 on # LPC - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip superio/winbond/w83697hf # Super I/O - register "hwmon_fan1_divisor" = "128" - register "hwmon_fan2_divisor" = "4" - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 (N/A on this board) - end - device pnp 2e.6 off # CIR - end - device pnp 2e.7 off # Game port/GPIO 1 - end - device pnp 2e.8 off # MIDI/GPIO 5 - end - device pnp 2e.009 off # GPIO 2 - end - device pnp 2e.109 off # GPIO 3 - end - device pnp 2e.209 off # GPIO 4 - end - device pnp 2e.a off # ACPI - end - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 0 - end - end - end - device pci 12.0 off end # VIA LAN (off, other chip used) - end - chip southbridge/via/k8t890 # "Southbridge" K8T890 - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end + device cpu_cluster 0 on # APIC cluster + chip cpu/amd/socket_754 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + subsystemid 0x1043 0 inherit + chip northbridge/amd/amdk8 # mc0 + device pci 18.0 on # Northbridge + # Devices on link 0, link 0 == LDT 0 + chip southbridge/via/vt8237r # Southbridge + register "ide0_enable" = "1" # Enable IDE channel 0 + register "ide1_enable" = "1" # Enable IDE channel 1 + register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 + register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 + register "fn_ctrl_lo" = "0" # Enable SB functions + register "fn_ctrl_hi" = "0xad" # Enable SB functions + register "usb2_termination_set" = "1" + register "usb2_termination_a" = "8" + register "usb2_termination_b" = "8" + register "usb2_termination_c" = "6" + register "usb2_termination_d" = "6" + register "usb2_termination_e" = "6" + register "usb2_termination_f" = "6" + register "usb2_termination_g" = "6" + register "usb2_termination_h" = "6" + register "usb2_dpll_set" = "1" + register "usb2_dpll_delay" = "3" + register "int_efgh_as_gpio" = "1" + register "enable_gpo3" = "1" + register "disable_gpo26_gpo27" = "1" + register "enable_aol_2_smb_slave" = "1" + register "enable_gpo5" = "1" + register "gpio15_12_dir_output" = "1" + device pci 0.0 on end # HT + device pci f.1 on end # IDE + device pci 10.4 on end # USB2 + device pci 11.0 on # LPC + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip superio/winbond/w83697hf # Super I/O + register "hwmon_fan1_divisor" = "128" + register "hwmon_fan2_divisor" = "4" + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 (N/A on this board) + end + device pnp 2e.6 off # CIR + end + device pnp 2e.7 off # Game port/GPIO 1 + end + device pnp 2e.8 off # MIDI/GPIO 5 + end + device pnp 2e.009 off # GPIO 2 + end + device pnp 2e.109 off # GPIO 3 + end + device pnp 2e.209 off # GPIO 4 + end + device pnp 2e.a off # ACPI + end + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 0 + end + end + end + device pci 12.0 off end # VIA LAN (off, other chip used) + end + chip southbridge/via/k8t890 # "Southbridge" K8T890 + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end end diff --git a/src/mainboard/asus/m2n-e/devicetree.cb b/src/mainboard/asus/m2n-e/devicetree.cb index bbe2124..c810d3f 100644 --- a/src/mainboard/asus/m2n-e/devicetree.cb +++ b/src/mainboard/asus/m2n-e/devicetree.cb @@ -19,103 +19,103 @@ ##
chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_AM2 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x1043 0x8239 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/ite/it8716f # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 (N/A) - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - io 0x62 = 0x000 - irq 0x70 = 7 - drq 0x74 = 4 - end - device pnp 2e.4 on # Environment controller - io 0x60 = 0x290 - io 0x62 = 0x000 - irq 0x70 = 0 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard IRQ - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 # PS/2 mouse IRQ - end - device pnp 2e.7 off # GPIO - io 0x60 = 0x0000 # SMI# Normal Run Access - io 0x62 = 0x800 # Simple I/O - io 0x64 = 0x0000 # Serial Flash I/F - end - device pnp 2e.8 off # MIDI (N/A) - end - device pnp 2e.9 off # Game port (N/A) - end - device pnp 2e.a off # Consumer IR (N/A) - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on end # PCI - device pci 6.1 on end # Azalia (HD Audio) - device pci 8.0 on end # NIC - device pci 9.0 off end # NIC (N/A) - device pci a.0 on end # PCI E 5 (PCIEX4) - device pci b.0 off end # PCI E 4 - device pci c.0 on end # PCI E 3 (PCIEX1_2) - device pci d.0 on end # PCI E 2 (PCIEX1_1) - device pci e.0 off end # PCI E 1 - device pci f.0 on end # PCI E 0 (PCIEX16_1) - register "ide0_enable" = "1" # Primary IDE - register "ide1_enable" = "0" # Secondary IDE (N/A) - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_AM2 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x1043 0x8239 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/ite/it8716f # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 (N/A) + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + io 0x62 = 0x000 + irq 0x70 = 7 + drq 0x74 = 4 + end + device pnp 2e.4 on # Environment controller + io 0x60 = 0x290 + io 0x62 = 0x000 + irq 0x70 = 0 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard IRQ + end + device pnp 2e.6 on # PS/2 mouse + irq 0x70 = 12 # PS/2 mouse IRQ + end + device pnp 2e.7 off # GPIO + io 0x60 = 0x0000 # SMI# Normal Run Access + io 0x62 = 0x800 # Simple I/O + io 0x64 = 0x0000 # Serial Flash I/F + end + device pnp 2e.8 off # MIDI (N/A) + end + device pnp 2e.9 off # Game port (N/A) + end + device pnp 2e.a off # Consumer IR (N/A) + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on end # PCI + device pci 6.1 on end # Azalia (HD Audio) + device pci 8.0 on end # NIC + device pci 9.0 off end # NIC (N/A) + device pci a.0 on end # PCI E 5 (PCIEX4) + device pci b.0 off end # PCI E 4 + device pci c.0 on end # PCI E 3 (PCIEX1_2) + device pci d.0 on end # PCI E 2 (PCIEX1_1) + device pci e.0 off end # PCI E 1 + device pci f.0 on end # PCI E 0 (PCIEX16_1) + register "ide0_enable" = "1" # Primary IDE + register "ide1_enable" = "0" # Secondary IDE (N/A) + register "sata0_enable" = "1" + register "sata1_enable" = "1" + end + end + device pci 18.0 on end # Link 1 + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end end diff --git a/src/mainboard/asus/m2v-mx_se/devicetree.cb b/src/mainboard/asus/m2v-mx_se/devicetree.cb index 213e3ea..73631b3 100644 --- a/src/mainboard/asus/m2v-mx_se/devicetree.cb +++ b/src/mainboard/asus/m2v-mx_se/devicetree.cb @@ -1,77 +1,77 @@ chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # APIC cluster - chip cpu/amd/socket_AM2 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - subsystemid 0x1043 0 inherit - chip northbridge/amd/amdk8 # mc0 - device pci 18.0 on # Northbridge - # Devices on link 0, link 0 == LDT 0 - chip southbridge/via/vt8237r # Southbridge - register "ide0_enable" = "1" # Enable IDE channel 0 - register "ide1_enable" = "1" # Enable IDE channel 1 - register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 - register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 - register "fn_ctrl_lo" = "0xc0" # Enable SB functions - register "fn_ctrl_hi" = "0x1d" # Enable SB functions - device pci 0.0 on end # HT - device pci f.1 on end # IDE - device pci 11.0 on # LPC - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip superio/ite/it8712f # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # Environment controller - io 0x60 = 0x290 - io 0x62 = 0x230 - irq 0x70 = 0x00 - end - device pnp 2e.5 off end # PS/2 keyboard - device pnp 2e.6 off end # PS/2 mouse - device pnp 2e.7 off end # GPIO config - device pnp 2e.8 off end # Midi port - device pnp 2e.9 off end # Game port - device pnp 2e.a off end # IR - end - end - device pci 12.0 on end # VIA LAN - device pci 13.0 on end # br - device pci 13.1 on end # br2 need to have it here to discover it - end - chip southbridge/via/k8t890 # "Southbridge" K8M890 - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end + device cpu_cluster 0 on # APIC cluster + chip cpu/amd/socket_AM2 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + subsystemid 0x1043 0 inherit + chip northbridge/amd/amdk8 # mc0 + device pci 18.0 on # Northbridge + # Devices on link 0, link 0 == LDT 0 + chip southbridge/via/vt8237r # Southbridge + register "ide0_enable" = "1" # Enable IDE channel 0 + register "ide1_enable" = "1" # Enable IDE channel 1 + register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 + register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 + register "fn_ctrl_lo" = "0xc0" # Enable SB functions + register "fn_ctrl_hi" = "0x1d" # Enable SB functions + device pci 0.0 on end # HT + device pci f.1 on end # IDE + device pci 11.0 on # LPC + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip superio/ite/it8712f # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Environment controller + io 0x60 = 0x290 + io 0x62 = 0x230 + irq 0x70 = 0x00 + end + device pnp 2e.5 off end # PS/2 keyboard + device pnp 2e.6 off end # PS/2 mouse + device pnp 2e.7 off end # GPIO config + device pnp 2e.8 off end # Midi port + device pnp 2e.9 off end # Game port + device pnp 2e.a off end # IR + end + end + device pci 12.0 on end # VIA LAN + device pci 13.0 on end # br + device pci 13.1 on end # br2 need to have it here to discover it + end + chip southbridge/via/k8t890 # "Southbridge" K8M890 + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end end diff --git a/src/mainboard/asus/m2v/devicetree.cb b/src/mainboard/asus/m2v/devicetree.cb index 61d94ba..1222256 100644 --- a/src/mainboard/asus/m2v/devicetree.cb +++ b/src/mainboard/asus/m2v/devicetree.cb @@ -1,75 +1,75 @@ chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # APIC cluster - chip cpu/amd/socket_AM2 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - subsystemid 0x1043 0 inherit - chip northbridge/amd/amdk8 # mc0 - device pci 18.0 on # Northbridge - # Devices on link 0, link 0 == LDT 0 - chip southbridge/via/vt8237r # Southbridge - register "ide0_enable" = "1" # Enable IDE channel 0 - register "ide1_enable" = "1" # Enable IDE channel 1 - register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 - register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 - register "fn_ctrl_lo" = "0xc0" # Enable SB functions - register "fn_ctrl_hi" = "0x0d" # Enable SB functions - device pci 0.0 on end # HT - device pci f.1 on end # IDE - device pci 11.0 on # LPC - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip superio/ite/it8712f # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off end # Com2 (N/A on this board) - device pnp 2e.3 on # Lpt1 - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.4 on # Environment controller - io 0x60 = 0xd00 - io 0x62 = 0xc00 - irq 0x70 = 0x00 - end - device pnp 2e.5 off end # PS/2 keyboard - device pnp 2e.6 off end # PS/2 mouse - device pnp 2e.7 off end # GPIO config - device pnp 2e.8 off end # Midi port - device pnp 2e.9 off end # Game port - device pnp 2e.a off end # IR - end - end - device pci 12.0 off end # VIA LAN (off, other chip used) - device pci 13.0 on end # br - device pci 13.1 on end # br2, need to have it here to discover it - end - chip southbridge/via/k8t890 # "Southbridge" K8T890 - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end + device cpu_cluster 0 on # APIC cluster + chip cpu/amd/socket_AM2 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + subsystemid 0x1043 0 inherit + chip northbridge/amd/amdk8 # mc0 + device pci 18.0 on # Northbridge + # Devices on link 0, link 0 == LDT 0 + chip southbridge/via/vt8237r # Southbridge + register "ide0_enable" = "1" # Enable IDE channel 0 + register "ide1_enable" = "1" # Enable IDE channel 1 + register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 + register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 + register "fn_ctrl_lo" = "0xc0" # Enable SB functions + register "fn_ctrl_hi" = "0x0d" # Enable SB functions + device pci 0.0 on end # HT + device pci f.1 on end # IDE + device pci 11.0 on # LPC + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip superio/ite/it8712f # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off end # Com2 (N/A on this board) + device pnp 2e.3 on # Lpt1 + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.4 on # Environment controller + io 0x60 = 0xd00 + io 0x62 = 0xc00 + irq 0x70 = 0x00 + end + device pnp 2e.5 off end # PS/2 keyboard + device pnp 2e.6 off end # PS/2 mouse + device pnp 2e.7 off end # GPIO config + device pnp 2e.8 off end # Midi port + device pnp 2e.9 off end # Game port + device pnp 2e.a off end # IR + end + end + device pci 12.0 off end # VIA LAN (off, other chip used) + device pci 13.0 on end # br + device pci 13.1 on end # br2, need to have it here to discover it + end + chip southbridge/via/k8t890 # "Southbridge" K8T890 + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end end diff --git a/src/mainboard/asus/m4a78-em/devicetree.cb b/src/mainboard/asus/m4a78-em/devicetree.cb index e760c17..c6202f2 100644 --- a/src/mainboard/asus/m4a78-em/devicetree.cb +++ b/src/mainboard/asus/m4a78-em/devicetree.cb @@ -1,27 +1,27 @@ chip northbridge/amd/amdfam10/root_complex device cpu_cluster 0 on - chip cpu/amd/socket_AM3 #L1 and DDR2 + chip cpu/amd/socket_AM3 #L1 and DDR2 device lapic 0 on end end end device domain 0 on subsystemid 0x1043 0x83f1 inherit chip northbridge/amd/amdfam10 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 - device pci 3.0 on end # PCIE P2P bridge 0x960b - device pci 4.0 on end # PCIE P2P bridge 0x9604 - device pci 5.0 off end # PCIE P2P bridge 0x9605 - device pci 6.0 off end # PCIE P2P bridge 0x9606 - device pci 7.0 off end # PCIE P2P bridge 0x9607 - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 on end # - device pci a.0 on end # bridge to RTL8112 PCI Express Gigabit Ethernet - register "gppsb_configuration" = "1" # Configuration B - register "gpp_configuration" = "3" # Configuration D default + device pci 0.0 on end # HT 0x9600 + device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 + device pci 3.0 on end # PCIE P2P bridge 0x960b + device pci 4.0 on end # PCIE P2P bridge 0x9604 + device pci 5.0 off end # PCIE P2P bridge 0x9605 + device pci 6.0 off end # PCIE P2P bridge 0x9606 + device pci 7.0 off end # PCIE P2P bridge 0x9607 + device pci 8.0 off end # NB/SB Link P2P bridge + device pci 9.0 on end # + device pci a.0 on end # bridge to RTL8112 PCI Express Gigabit Ethernet + register "gppsb_configuration" = "1" # Configuration B + register "gpp_configuration" = "3" # Configuration D default register "port_enable" = "0x6fc" register "gfx_dev2_dev3" = "1" register "gfx_dual_slot" = "2" @@ -33,14 +33,14 @@ chip northbridge/amd/amdfam10/root_complex register "gfx_link_width" = "0" end chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.1 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.1 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.1 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.1 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM chip drivers/generic/generic #dimm 0-0-0 device i2c 50 on end end @@ -54,47 +54,46 @@ chip northbridge/amd/amdfam10/root_complex device i2c 53 on end end end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d chip superio/ite/it8712f - device pnp 2e.0 off end # Floppy - device pnp 2e.1 on # Com1 + device pnp 2e.0 off end # Floppy + device pnp 2e.1 on # Com1 io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.2 off # Com2 + device pnp 2e.2 off # Com2 io 0x60 = 0x2f8 irq 0x70 = 3 end - device pnp 2e.3 off # Parallel Port + device pnp 2e.3 off # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 end - device pnp 2e.4 off end # Environment Controller - device pnp 2e.5 on # Keyboard + device pnp 2e.4 off end # Environment Controller + device pnp 2e.5 on # Keyboard io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 end - device pnp 2e.6 on # Mouse + device pnp 2e.6 on # Mouse irq 0x70 = 12 end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. + device pnp 2e.7 off # GPIO, must be closed for unresolved reason. end - device pnp 2e.8 off # MIDI + device pnp 2e.8 off # MIDI end - device pnp 2e.9 off # GAME + device pnp 2e.9 off # GAME end - device pnp 2e.a off end # CIR + device pnp 2e.a off end # CIR end #superio end #LPC - device pci 14.4 on end # PCI to PCI Bridge [1002:4384] - device pci 14.5 on end # USB 2 + device pci 14.4 on end # PCI to PCI Bridge [1002:4384] + device pci 14.5 on end # USB 2 register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE end #southbridge/amd/sb700 - end # device pci 18.0 - + end # device pci 18.0 device pci 18.0 on end device pci 18.0 on end device pci 18.1 on end diff --git a/src/mainboard/asus/m4a785-m/devicetree.cb b/src/mainboard/asus/m4a785-m/devicetree.cb index 4549ead..dc5a4c9 100644 --- a/src/mainboard/asus/m4a785-m/devicetree.cb +++ b/src/mainboard/asus/m4a785-m/devicetree.cb @@ -1,27 +1,27 @@ chip northbridge/amd/amdfam10/root_complex device cpu_cluster 0 on - chip cpu/amd/socket_AM3 #L1 and DDR2 + chip cpu/amd/socket_AM3 #L1 and DDR2 device lapic 0 on end end end device domain 0 on subsystemid 0x1043 0x83a2 inherit chip northbridge/amd/amdfam10 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 - device pci 2.0 off end # PCIE P2P bridge (external graphics) 0x9603 - device pci 3.0 off end # PCIE P2P bridge 0x960b - device pci 4.0 off end # PCIE P2P bridge 0x9604 - device pci 5.0 off end # PCIE P2P bridge 0x9605 - device pci 6.0 off end # PCIE P2P bridge 0x9606 - device pci 7.0 off end # PCIE P2P bridge 0x9607 - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 off end # - device pci a.0 on end # bridge to RTL8111/8168B PCI Express Gigabit Ethernet - register "gppsb_configuration" = "1" # Configuration B - register "gpp_configuration" = "3" # Configuration D default + device pci 0.0 on end # HT 0x9600 + device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 + device pci 2.0 off end # PCIE P2P bridge (external graphics) 0x9603 + device pci 3.0 off end # PCIE P2P bridge 0x960b + device pci 4.0 off end # PCIE P2P bridge 0x9604 + device pci 5.0 off end # PCIE P2P bridge 0x9605 + device pci 6.0 off end # PCIE P2P bridge 0x9606 + device pci 7.0 off end # PCIE P2P bridge 0x9607 + device pci 8.0 off end # NB/SB Link P2P bridge + device pci 9.0 off end # + device pci a.0 on end # bridge to RTL8111/8168B PCI Express Gigabit Ethernet + register "gppsb_configuration" = "1" # Configuration B + register "gpp_configuration" = "3" # Configuration D default register "port_enable" = "0x6fc" register "gfx_dev2_dev3" = "1" register "gfx_dual_slot" = "2" @@ -32,15 +32,15 @@ chip northbridge/amd/amdfam10/root_complex register "gfx_reconfiguration" = "1" register "gfx_link_width" = "0" end - chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.1 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.1 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM + chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.1 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.1 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM chip drivers/generic/generic #dimm 0-0-0 device i2c 50 on end end @@ -54,46 +54,46 @@ chip northbridge/amd/amdfam10/root_complex device i2c 53 on end end end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d chip superio/ite/it8712f - device pnp 2e.0 off end # Floppy - device pnp 2e.1 on # Com1 + device pnp 2e.0 off end # Floppy + device pnp 2e.1 on # Com1 io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.2 off # Com2 + device pnp 2e.2 off # Com2 io 0x60 = 0x2f8 irq 0x70 = 3 end - device pnp 2e.3 off # Parallel Port + device pnp 2e.3 off # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 end - device pnp 2e.4 off end # Environment Controller - device pnp 2e.5 on # Keyboard + device pnp 2e.4 off end # Environment Controller + device pnp 2e.5 on # Keyboard io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 end - device pnp 2e.6 on # Mouse + device pnp 2e.6 on # Mouse irq 0x70 = 12 end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. + device pnp 2e.7 off # GPIO, must be closed for unresolved reason. end - device pnp 2e.8 off # MIDI + device pnp 2e.8 off # MIDI end - device pnp 2e.9 off # GAME + device pnp 2e.9 off # GAME end - device pnp 2e.a off end # CIR + device pnp 2e.a off end # CIR end #superio end #LPC - device pci 14.4 on end # PCI to PCI Bridge [1002:4384] - device pci 14.5 on end # USB 2 + device pci 14.4 on end # PCI to PCI Bridge [1002:4384] + device pci 14.5 on end # USB 2 register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE end #southbridge/amd/sb700 - end # device pci 18.0 + end # device pci 18.0
device pci 18.0 on end device pci 18.0 on end diff --git a/src/mainboard/asus/m4a785t-m/devicetree.cb b/src/mainboard/asus/m4a785t-m/devicetree.cb index 9783989..e83dec3 100644 --- a/src/mainboard/asus/m4a785t-m/devicetree.cb +++ b/src/mainboard/asus/m4a785t-m/devicetree.cb @@ -1,29 +1,29 @@ chip northbridge/amd/amdfam10/root_complex device cpu_cluster 0 on - chip cpu/amd/socket_AM3 #L1 and DDR2 + chip cpu/amd/socket_AM3 #L1 and DDR2 device lapic 0 on end end end device domain 0 on subsystemid 0x1043 0x83a2 inherit chip northbridge/amd/amdfam10 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on # Internal Graphics P2P bridge 0x9602 + device pci 0.0 on end # HT 0x9600 + device pci 1.0 on # Internal Graphics P2P bridge 0x9602 device pci 5.0 on end # onboard VGA end - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 - device pci 3.0 off end # PCIE P2P bridge 0x960b - device pci 4.0 off end # PCIE P2P bridge 0x9604 - device pci 5.0 off end # PCIE P2P bridge 0x9605 - device pci 6.0 off end # PCIE P2P bridge 0x9606 - device pci 7.0 off end # PCIE P2P bridge 0x9607 - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 off end # - device pci a.0 on end # bridge to RTL8111/8168B PCI Express Gigabit Ethernet - register "gppsb_configuration" = "1" # Configuration B - register "gpp_configuration" = "3" # Configuration D default + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 + device pci 3.0 off end # PCIE P2P bridge 0x960b + device pci 4.0 off end # PCIE P2P bridge 0x9604 + device pci 5.0 off end # PCIE P2P bridge 0x9605 + device pci 6.0 off end # PCIE P2P bridge 0x9606 + device pci 7.0 off end # PCIE P2P bridge 0x9607 + device pci 8.0 off end # NB/SB Link P2P bridge + device pci 9.0 off end # + device pci a.0 on end # bridge to RTL8111/8168B PCI Express Gigabit Ethernet + register "gppsb_configuration" = "1" # Configuration B + register "gpp_configuration" = "3" # Configuration D default register "port_enable" = "0x6fc" register "gfx_dev2_dev3" = "1" register "gfx_dual_slot" = "0" @@ -34,15 +34,15 @@ chip northbridge/amd/amdfam10/root_complex register "gfx_reconfiguration" = "1" register "gfx_link_width" = "0" end - chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.1 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.1 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM + chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.1 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.1 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM chip drivers/generic/generic #dimm 0-0-0 device i2c 50 on end end @@ -56,47 +56,46 @@ chip northbridge/amd/amdfam10/root_complex device i2c 53 on end end end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d chip superio/ite/it8712f - device pnp 2e.0 off end # Floppy - device pnp 2e.1 on # Com1 + device pnp 2e.0 off end # Floppy + device pnp 2e.1 on # Com1 io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.2 off # Com2 + device pnp 2e.2 off # Com2 io 0x60 = 0x2f8 irq 0x70 = 3 end - device pnp 2e.3 off # Parallel Port + device pnp 2e.3 off # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 end - device pnp 2e.4 off end # Environment Controller - device pnp 2e.5 on # Keyboard + device pnp 2e.4 off end # Environment Controller + device pnp 2e.5 on # Keyboard io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 end - device pnp 2e.6 on # Mouse + device pnp 2e.6 on # Mouse irq 0x70 = 12 end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. + device pnp 2e.7 off # GPIO, must be closed for unresolved reason. end - device pnp 2e.8 off # MIDI + device pnp 2e.8 off # MIDI end - device pnp 2e.9 off # GAME + device pnp 2e.9 off # GAME end - device pnp 2e.a off end # CIR + device pnp 2e.a off end # CIR end #superio end #LPC - device pci 14.4 on end # PCI to PCI Bridge [1002:4384] - device pci 14.5 on end # USB 2 + device pci 14.4 on end # PCI to PCI Bridge [1002:4384] + device pci 14.5 on end # USB 2 register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE end #southbridge/amd/sb700 - end # device pci 18.0 - + end # device pci 18.0 device pci 18.0 on end device pci 18.0 on end device pci 18.1 on end diff --git a/src/mainboard/asus/m5a88-v/devicetree.cb b/src/mainboard/asus/m5a88-v/devicetree.cb index 65ddf30..5f16e90 100644 --- a/src/mainboard/asus/m5a88-v/devicetree.cb +++ b/src/mainboard/asus/m5a88-v/devicetree.cb @@ -1,26 +1,26 @@ # sample config for advansus/A785E-I chip northbridge/amd/amdfam10/root_complex device cpu_cluster 0 on - chip cpu/amd/socket_AM3 #L1 and DDR3 + chip cpu/amd/socket_AM3 #L1 and DDR3 device lapic 0 on end end end device domain 0 on subsystemid 0x1043 0x843e inherit #TODO: Set the correctly subsystem id. chip northbridge/amd/amdfam10 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on end # Internal Graphics P2P bridge 0x9712 - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 - device pci 3.0 off end # PCIE P2P bridge 0x960b - device pci 4.0 on end # PCIE P2P bridge 0x9604 wireless - device pci 5.0 off end # PCIE P2P bridge 0x9605 - device pci 6.0 off end # PCIE P2P bridge 0x9606 - device pci 7.0 off end # PCIE P2P bridge 0x9607 - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 on end # Ethernet - device pci a.0 on end # Ethernet + device pci 0.0 on end # HT 0x9600 + device pci 1.0 on end # Internal Graphics P2P bridge 0x9712 + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 + device pci 3.0 off end # PCIE P2P bridge 0x960b + device pci 4.0 on end # PCIE P2P bridge 0x9604 wireless + device pci 5.0 off end # PCIE P2P bridge 0x9605 + device pci 6.0 off end # PCIE P2P bridge 0x9606 + device pci 7.0 off end # PCIE P2P bridge 0x9607 + device pci 8.0 off end # NB/SB Link P2P bridge + device pci 9.0 on end # Ethernet + device pci a.0 on end # Ethernet register "gppsb_configuration" = "4" # Configuration E register "gpp_configuration" = "3" # Configuration D register "port_enable" = "0x6f6" @@ -31,16 +31,16 @@ chip northbridge/amd/amdfam10/root_complex register "gfx_reconfiguration" = "1" register "gfx_link_width" = "0" register "gfx_tmds" = "1" - register "gfx_pcie_config" = "3" # 1x8 GFX on Lanes 8-15 - register "gfx_ddi_config" = "1" # Lanes 0-3 DDI_SL + register "gfx_pcie_config" = "3" # 1x8 GFX on Lanes 8-15 + register "gfx_ddi_config" = "1" # Lanes 0-3 DDI_SL end - chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pci bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM + chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pci bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM chip drivers/generic/generic #dimm 0-0-0 device i2c 50 on end end @@ -54,67 +54,66 @@ chip northbridge/amd/amdfam10/root_complex device i2c 53 on end end end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC host controller [1002:439d] + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC host controller [1002:439d] chip superio/ite/it8721f - device pnp 2e.0 off # Floppy + device pnp 2e.0 off # Floppy io 0x60 = 0x3f0 irq 0x70 = 6 drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port + device pnp 2e.1 off # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 end - device pnp 2e.2 on # Com1 + device pnp 2e.2 on # Com1 io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.3 on # Com2 + device pnp 2e.3 on # Com2 io 0x60 = 0x2f8 irq 0x70 = 3 end - device pnp 2e.5 on # Keyboard + device pnp 2e.5 on # Keyboard io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 irq 0x72 = 12 end - device pnp 2e.6 off # SFI + device pnp 2e.6 off # SFI io 0x62 = 0x100 end - device pnp 2e.7 off # GPIO_GAME_MIDI + device pnp 2e.7 off # GPIO_GAME_MIDI io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 end - device pnp 2e.8 off end # WDTO_PLED - device pnp 2e.9 off end # GPIO_SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO_SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor io 0x60 = 0x290 irq 0x70 = 5 end end #superio/ite/it8721f end # LPC host controller [1002:439d] - device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 on end # USB 2 - device pci 14.6 off end # Gec - device pci 15.0 on end # PCIe 0 - device pci 15.1 on end # PCIe 1 - device pci 15.2 on end # PCIe 2 - device pci 15.3 on end # PCIe 3 - device pci 16.0 on end # USB - device pci 16.2 on end # USB + device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} + device pci 14.5 on end # USB 2 + device pci 14.6 off end # Gec + device pci 15.0 on end # PCIe 0 + device pci 15.1 on end # PCIe 1 + device pci 15.2 on end # PCIe 2 + device pci 15.3 on end # PCIe 3 + device pci 16.0 on end # USB + device pci 16.2 on end # USB #register "gpp_configuration" = "0" #4:0:0:0 #register "gpp_configuration" = "2" #2:2:0:0 #register "gpp_configuration" = "3" #2:1:1:0 register "gpp_configuration" = "4" #1:1:1:1 register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE end #southbridge/amd/cimx/sb800 - end # device pci 18.0 - + end # device pci 18.0 device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end diff --git a/src/mainboard/asus/mew-am/devicetree.cb b/src/mainboard/asus/mew-am/devicetree.cb index 8a20cab..473031e 100644 --- a/src/mainboard/asus/mew-am/devicetree.cb +++ b/src/mainboard/asus/mew-am/devicetree.cb @@ -1,60 +1,60 @@ chip northbridge/intel/i82810 # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/socket_PGA370 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Graphics Memory Controller Hub (GMCH) - device pci 1.0 on end # Chipset Graphics Controller (CGC) - chip southbridge/intel/i82801ax # Southbridge - register "ide0_enable" = "1" - register "ide1_enable" = "1" + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/socket_PGA370 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Graphics Memory Controller Hub (GMCH) + device pci 1.0 on end # Chipset Graphics Controller (CGC) + chip southbridge/intel/i82801ax # Southbridge + register "ide0_enable" = "1" + register "ide1_enable" = "1"
- device pci 1e.0 on end # PCI bridge - device pci 1f.0 on # ISA bridge - chip superio/smsc/smscsuperio # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 4 - end - device pnp 2e.4 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.5 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.7 on # PS/2 keyboard / mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 2e.9 on # Game port - io 0x60 = 0x201 - end - device pnp 2e.a on # Power-management events (PME) - io 0x60 = 0x600 - end - device pnp 2e.b on # MIDI port (MPU-401) - io 0x60 = 0x330 - irq 0x70 = 5 - end - end - end - device pci 1f.1 on end # IDE - device pci 1f.2 on end # USB - device pci 1f.3 on end # SMbus - device pci 1f.5 off end # AC'97 audio (N/A, uses CS4280 chip) - device pci 1f.6 off end # AC'97 modem (N/A) - end - end + device pci 1e.0 on end # PCI bridge + device pci 1f.0 on # ISA bridge + chip superio/smsc/smscsuperio # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 4 + end + device pnp 2e.4 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 2e.9 on # Game port + io 0x60 = 0x201 + end + device pnp 2e.a on # Power-management events (PME) + io 0x60 = 0x600 + end + device pnp 2e.b on # MIDI port (MPU-401) + io 0x60 = 0x330 + irq 0x70 = 5 + end + end + end + device pci 1f.1 on end # IDE + device pci 1f.2 on end # USB + device pci 1f.3 on end # SMbus + device pci 1f.5 off end # AC'97 audio (N/A, uses CS4280 chip) + device pci 1f.6 off end # AC'97 modem (N/A) + end + end end diff --git a/src/mainboard/asus/mew-vm/devicetree.cb b/src/mainboard/asus/mew-vm/devicetree.cb index e0cc9e3..a9453ce 100644 --- a/src/mainboard/asus/mew-vm/devicetree.cb +++ b/src/mainboard/asus/mew-vm/devicetree.cb @@ -5,45 +5,45 @@ chip northbridge/intel/i82810 # device pci 1.0 on end end chip southbridge/intel/i82801ax # Southbridge - register "ide0_enable" = "1" - register "ide1_enable" = "1" + register "ide0_enable" = "1" + register "ide1_enable" = "1"
- device pci 1e.0 on # PCI Bridge + device pci 1e.0 on # PCI Bridge # device pci 1.0 on end end - device pci 1f.0 on # ISA/LPC? Bridge + device pci 1f.0 on # ISA/LPC? Bridge chip superio/smsc/lpc47b272 - device pnp 2e.0 off # Floppy + device pnp 2e.0 off # Floppy io 0x60 = 0x3f0 irq 0x70 = 6 drq 0x74 = 2 end - device pnp 2e.3 off # Parallel Port + device pnp 2e.3 off # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 end - device pnp 2e.4 on # Com1 + device pnp 2e.4 on # Com1 io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.5 off # Com2 + device pnp 2e.5 off # Com2 io 0x60 = 0x2f8 irq 0x70 = 3 end - device pnp 2e.7 on # Keyboard + device pnp 2e.7 on # Keyboard io 0x60 = 0x60 io 0x62 = 0x64 - irq 0x70 = 1 # Keyboard interrupt - irq 0x72 = 12 # Mouse interrupt + irq 0x70 = 1 # Keyboard interrupt + irq 0x72 = 12 # Mouse interrupt end - device pnp 2e.a off end # ACPI + device pnp 2e.a off end # ACPI end end - device pci 1f.1 on end # IDE - device pci 1f.2 on end # USB - device pci 1f.3 on end # SMBus - device pci 1f.5 off end # AC'97, no header on MEW-VM - device pci 1f.6 off end # AC'97 Modem (MC'97) + device pci 1f.1 on end # IDE + device pci 1f.2 on end # USB + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # AC'97, no header on MEW-VM + device pci 1f.6 off end # AC'97 Modem (MC'97) end end chip cpu/intel/socket_PGA370 diff --git a/src/mainboard/asus/p2b-d/devicetree.cb b/src/mainboard/asus/p2b-d/devicetree.cb index fe82a0d..d3fd869 100644 --- a/src/mainboard/asus/p2b-d/devicetree.cb +++ b/src/mainboard/asus/p2b-d/devicetree.cb @@ -1,62 +1,62 @@ chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/intel/slot_1 # CPU socket 0 - device lapic 0 on end # Local APIC of CPU 0 - end - chip cpu/intel/slot_1 # CPU socket 1 - device lapic 1 on end # Local APIC of CPU 1 - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 4.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard / mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.9 on # GPIO 3 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 4.1 on end # IDE - device pci 4.2 on end # USB - device pci 4.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "1" - register "ide0_drive1_udma33_enable" = "1" - register "ide1_drive0_udma33_enable" = "1" - register "ide1_drive1_udma33_enable" = "1" - end - end + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/intel/slot_1 # CPU socket 0 + device lapic 0 on end # Local APIC of CPU 0 + end + chip cpu/intel/slot_1 # CPU socket 1 + device lapic 1 on end # Local APIC of CPU 1 + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 4.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.9 on # GPIO 3 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 4.1 on end # IDE + device pci 4.2 on end # USB + device pci 4.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "1" + register "ide0_drive1_udma33_enable" = "1" + register "ide1_drive0_udma33_enable" = "1" + register "ide1_drive1_udma33_enable" = "1" + end + end end diff --git a/src/mainboard/asus/p2b-ds/devicetree.cb b/src/mainboard/asus/p2b-ds/devicetree.cb index b8e9e85..ddae6f6 100644 --- a/src/mainboard/asus/p2b-ds/devicetree.cb +++ b/src/mainboard/asus/p2b-ds/devicetree.cb @@ -1,63 +1,63 @@ chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/intel/slot_1 # CPU socket 0 - device lapic 0 on end # Local APIC of CPU 0 - end - chip cpu/intel/slot_1 # CPU socket 1 - device lapic 1 on end # Local APIC of CPU 1 - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 4.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard / mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.9 on # GPIO 3 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 4.1 on end # IDE - device pci 4.2 on end # USB - device pci 4.3 on end # ACPI - device pci 6.0 on end # Onboard SCSI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "1" - register "ide0_drive1_udma33_enable" = "1" - register "ide1_drive0_udma33_enable" = "1" - register "ide1_drive1_udma33_enable" = "1" - end - end + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/intel/slot_1 # CPU socket 0 + device lapic 0 on end # Local APIC of CPU 0 + end + chip cpu/intel/slot_1 # CPU socket 1 + device lapic 1 on end # Local APIC of CPU 1 + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 4.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.9 on # GPIO 3 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 4.1 on end # IDE + device pci 4.2 on end # USB + device pci 4.3 on end # ACPI + device pci 6.0 on end # Onboard SCSI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "1" + register "ide0_drive1_udma33_enable" = "1" + register "ide1_drive0_udma33_enable" = "1" + register "ide1_drive1_udma33_enable" = "1" + end + end end diff --git a/src/mainboard/asus/p2b-f/devicetree.cb b/src/mainboard/asus/p2b-f/devicetree.cb index 5bee5ae..c9ec31d 100644 --- a/src/mainboard/asus/p2b-f/devicetree.cb +++ b/src/mainboard/asus/p2b-f/devicetree.cb @@ -1,59 +1,59 @@ chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 4.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.6 on # Consumer IR - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 4.1 on end # IDE - device pci 4.2 on end # USB - device pci 4.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" - end - end + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 4.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.6 on # Consumer IR + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 4.1 on end # IDE + device pci 4.2 on end # USB + device pci 4.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end end diff --git a/src/mainboard/asus/p2b-ls/devicetree.cb b/src/mainboard/asus/p2b-ls/devicetree.cb index 9a785da..9fd4598 100644 --- a/src/mainboard/asus/p2b-ls/devicetree.cb +++ b/src/mainboard/asus/p2b-ls/devicetree.cb @@ -1,59 +1,59 @@ chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 4.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 4.1 on end # IDE - device pci 4.2 on end # USB - device pci 4.3 on end # ACPI - device pci 6.0 on end # Onboard SCSI - device pci 7.0 on end # Onboard LAN - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" - end - end + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 4.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 4.1 on end # IDE + device pci 4.2 on end # USB + device pci 4.3 on end # ACPI + device pci 6.0 on end # Onboard SCSI + device pci 7.0 on end # Onboard LAN + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end end diff --git a/src/mainboard/asus/p2b/devicetree.cb b/src/mainboard/asus/p2b/devicetree.cb index 84f0c29..92307d7 100644 --- a/src/mainboard/asus/p2b/devicetree.cb +++ b/src/mainboard/asus/p2b/devicetree.cb @@ -1,62 +1,62 @@ chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 4.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard / mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.9 on # GPIO 3 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 4.1 on end # IDE - device pci 4.2 on end # USB - device pci 4.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" - register "thrm_polarity" = "1" - register "lid_polarity" = "1" - register "gpo" = "0x7fffbbff" - end - end + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 4.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.9 on # GPIO 3 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 4.1 on end # IDE + device pci 4.2 on end # USB + device pci 4.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + register "thrm_polarity" = "1" + register "lid_polarity" = "1" + register "gpo" = "0x7fffbbff" + end + end end diff --git a/src/mainboard/asus/p3b-f/devicetree.cb b/src/mainboard/asus/p3b-f/devicetree.cb index 5bee5ae..c9ec31d 100644 --- a/src/mainboard/asus/p3b-f/devicetree.cb +++ b/src/mainboard/asus/p3b-f/devicetree.cb @@ -1,59 +1,59 @@ chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 4.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.6 on # Consumer IR - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 4.1 on end # IDE - device pci 4.2 on end # USB - device pci 4.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" - end - end + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 4.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.6 on # Consumer IR + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 4.1 on end # IDE + device pci 4.2 on end # USB + device pci 4.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end end diff --git a/src/mainboard/axus/tc320/devicetree.cb b/src/mainboard/axus/tc320/devicetree.cb index 970f71f..1b6fa69 100644 --- a/src/mainboard/axus/tc320/devicetree.cb +++ b/src/mainboard/axus/tc320/devicetree.cb @@ -1,55 +1,55 @@ chip northbridge/amd/gx1 # Northbridge - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - chip southbridge/amd/cs5530 # Southbridge - device pci 12.0 on # ISA bridge - chip superio/nsc/pc97317 # Super I/O - device pnp 2e.0 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.1 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.2 on # RTC, advanced power control (APC) - io 0x60 = 0x70 - irq 0x70 = 8 - end - device pnp 2e.3 off # Floppy (N/A on this board) - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.4 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.5 off # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.6 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.7 on # GPIO - io 0x60 = 0xe0 - end - device pnp 2e.8 on # Power management - io 0x60 = 0xe800 - end - end - end - device pci 12.1 off end # SMI - device pci 12.2 off end # IDE - device pci 12.3 on end # Audio - device pci 12.4 on end # VGA (onboard) - device pci 13.0 on end # USB - # register "ide0_enable" = "1" - # register "ide1_enable" = "1" - end - end - chip cpu/amd/geode_gx1 # CPU - end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + chip southbridge/amd/cs5530 # Southbridge + device pci 12.0 on # ISA bridge + chip superio/nsc/pc97317 # Super I/O + device pnp 2e.0 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.1 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.2 on # RTC, advanced power control (APC) + io 0x60 = 0x70 + irq 0x70 = 8 + end + device pnp 2e.3 off # Floppy (N/A on this board) + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.4 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.5 off # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.6 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.7 on # GPIO + io 0x60 = 0xe0 + end + device pnp 2e.8 on # Power management + io 0x60 = 0xe800 + end + end + end + device pci 12.1 off end # SMI + device pci 12.2 off end # IDE + device pci 12.3 on end # Audio + device pci 12.4 on end # VGA (onboard) + device pci 13.0 on end # USB + # register "ide0_enable" = "1" + # register "ide1_enable" = "1" + end + end + chip cpu/amd/geode_gx1 # CPU + end end diff --git a/src/mainboard/azza/pt-6ibd/devicetree.cb b/src/mainboard/azza/pt-6ibd/devicetree.cb index a2f5513..b28f7b3 100644 --- a/src/mainboard/azza/pt-6ibd/devicetree.cb +++ b/src/mainboard/azza/pt-6ibd/devicetree.cb @@ -1,59 +1,59 @@ chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 7.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard / mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.6 on # Consumer IR - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 7.1 on end # IDE - device pci 7.2 on end # USB - device pci 7.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" - end - end + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.6 on # Consumer IR + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end end diff --git a/src/mainboard/bachmann/ot200/devicetree.cb b/src/mainboard/bachmann/ot200/devicetree.cb index 1e61b3d..5d88c07 100644 --- a/src/mainboard/bachmann/ot200/devicetree.cb +++ b/src/mainboard/bachmann/ot200/devicetree.cb @@ -2,7 +2,7 @@ chip northbridge/amd/lx device domain 0 on device pci 1.0 on end # Northbridge device pci 1.1 on end # Graphics - device pci 1.2 on end # AES + device pci 1.2 on end # AES chip southbridge/amd/cs5536 register "lpc_serirq_enable" = "0x00000000" register "lpc_serirq_polarity" = "0x00000000" @@ -20,7 +20,7 @@ chip northbridge/amd/lx register "unwanted_vpci[0]" = "0" # End of list has a zero device pci 4.0 on end # Ethernet 0 device pci f.0 on # ISA Bridge - chip drivers/generic/generic # eeprom + chip drivers/generic/generic # eeprom device i2c 52 on end end end diff --git a/src/mainboard/broadcom/blast/devicetree.cb b/src/mainboard/broadcom/blast/devicetree.cb index 9de4331..d22cc43 100644 --- a/src/mainboard/broadcom/blast/devicetree.cb +++ b/src/mainboard/broadcom/blast/devicetree.cb @@ -7,25 +7,25 @@ chip northbridge/amd/amdk8/root_complex device domain 0 on subsystemid 0x161f 0x3050 inherit chip northbridge/amd/amdk8 - device pci 18.0 on # northbridge - # devices on link 0 + device pci 18.0 on # northbridge + # devices on link 0 chip southbridge/broadcom/bcm5780 # HT2000 - device pci 0.0 on end # PXB 1 0x0130 - device pci 1.0 on # PXB 2 0x0130 + device pci 0.0 on end # PXB 1 0x0130 + device pci 1.0 on # PXB 2 0x0130 device pci 4.0 on end # GB E 0x1668 vid = 0x14e4 device pci 4.1 on end # GB E 0x1669 vid = 0x14e4 end - device pci 2.0 on end # PCI E 1 #0x0132 + device pci 2.0 on end # PCI E 1 #0x0132 device pci 3.0 on end # PCI E 2 device pci 4.0 on end # PCI E 3 device pci 5.0 on end # PCI E 4 end chip southbridge/broadcom/bcm5785 # HT1000 - device pci 0.0 on # HT PXB 0x0036 + device pci 0.0 on # HT PXB 0x0036 device pci d.0 on end # PPBX 0x0104 device pci e.0 on end # SATA 0x024a end - device pci 1.0 on # Legacy pci main 0x0205 + device pci 1.0 on # Legacy pci main 0x0205 chip drivers/i2c/i2cmux2 # pca9554 smbus mux device i2c 71 on end #0 pca9554 0 device i2c 71 on end #0 pca9554 1 @@ -64,51 +64,51 @@ chip northbridge/amd/amdk8/root_complex end
end - device pci 1.1 on end # IDE 0x0214 - device pci 1.2 on # LPC 0x0234 + device pci 1.1 on end # IDE 0x0214 + device pci 1.2 on # LPC 0x0234 chip superio/nsc/pc87417 - device pnp 2e.0 off # Floppy + device pnp 2e.0 off # Floppy io 0x60 = 0x3f0 irq 0x70 = 6 drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port + device pnp 2e.1 off # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 end - device pnp 2e.2 off # Com 2 + device pnp 2e.2 off # Com 2 io 0x60 = 0x2f8 irq 0x70 = 3 end - device pnp 2e.3 on # Com 1 + device pnp 2e.3 on # Com 1 io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.4 off end # SWC - device pnp 2e.5 off end # Mouse - device pnp 2e.6 on # Keyboard + device pnp 2e.4 off end # SWC + device pnp 2e.5 off end # Mouse + device pnp 2e.6 on # Keyboard io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 end - device pnp 2e.7 off end # GPIO - device pnp 2e.f off end # XBUS - device pnp 2e.10 on #RTC + device pnp 2e.7 off end # GPIO + device pnp 2e.f off end # XBUS + device pnp 2e.10 on #RTC io 0x60 = 0x70 io 0x62 = 0x72 end end end - device pci 1.3 on end # WDTimer 0x0238 - device pci 1.4 on end # XIOAPIC0 0x0235 + device pci 1.3 on end # WDTimer 0x0238 + device pci 1.4 on end # XIOAPIC0 0x0235 device pci 1.5 on end # XIOAPIC1 device pci 1.6 on end # XIOAPIC2 - device pci 2.0 on end # USB 0x0223 + device pci 2.0 on end # USB 0x0223 device pci 2.1 on end # USB device pci 2.2 on end # USB device pci 4.0 on end # it is in bcm5785_0 bus end - end # device pci 18.0 + end # device pci 18.0
device pci 18.0 on end device pci 18.0 on end @@ -116,8 +116,6 @@ chip northbridge/amd/amdk8/root_complex device pci 18.2 on end device pci 18.3 on end end - - end #domain end
diff --git a/src/mainboard/compaq/deskpro_en_sff_p600/devicetree.cb b/src/mainboard/compaq/deskpro_en_sff_p600/devicetree.cb index def9e2f..3947a1a 100644 --- a/src/mainboard/compaq/deskpro_en_sff_p600/devicetree.cb +++ b/src/mainboard/compaq/deskpro_en_sff_p600/devicetree.cb @@ -1,63 +1,63 @@ chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - device pci a.0 on end # NIC (onboard) - chip southbridge/intel/i82371eb # Southbridge - device pci 14.0 on # ISA bridge - # chip superio/nsc/pc97307 # Super I/O - chip superio/nsc/pc97317 # Super I/O (FIXME: Should be PC97307!) - device pnp 15c.0 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 15c.1 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 15c.2 on # RTC, APC - io 0x60 = 0x70 - irq 0x70 = 8 - end - device pnp 15c.3 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 15c.4 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 15c.5 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 15c.6 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 15c.7 on # GPIO 1 - end - device pnp 15c.8 on # Power management - end - end - end - device pci 14.1 on end # IDE - device pci 14.2 on end # USB - device pci 14.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" - end - end + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + device pci a.0 on end # NIC (onboard) + chip southbridge/intel/i82371eb # Southbridge + device pci 14.0 on # ISA bridge + # chip superio/nsc/pc97307 # Super I/O + chip superio/nsc/pc97317 # Super I/O (FIXME: Should be PC97307!) + device pnp 15c.0 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 15c.1 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 15c.2 on # RTC, APC + io 0x60 = 0x70 + irq 0x70 = 8 + end + device pnp 15c.3 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 15c.4 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 15c.5 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 15c.6 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 15c.7 on # GPIO 1 + end + device pnp 15c.8 on # Power management + end + end + end + device pci 14.1 on end # IDE + device pci 14.2 on end # USB + device pci 14.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end end diff --git a/src/mainboard/digitallogic/adl855pc/devicetree.cb b/src/mainboard/digitallogic/adl855pc/devicetree.cb index 3a9603b..58d1329 100644 --- a/src/mainboard/digitallogic/adl855pc/devicetree.cb +++ b/src/mainboard/digitallogic/adl855pc/devicetree.cb @@ -14,38 +14,38 @@ chip northbridge/intel/i855 register "enable_usb" = "0" register "enable_native_ide" = "0" chip superio/winbond/w83627hf # link 1 - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 irq 0x72 = 12 end - device pnp 2e.6 off end # CIR - device pnp 2e.7 off end # GAME_MIDI_GIPO1 - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 + device pnp 2e.6 off end # CIR + device pnp 2e.7 off end # GAME_MIDI_GIPO1 + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 end - end + end end end device cpu_cluster 0 on diff --git a/src/mainboard/digitallogic/msm800sev/devicetree.cb b/src/mainboard/digitallogic/msm800sev/devicetree.cb index 839b767..bec0412 100644 --- a/src/mainboard/digitallogic/msm800sev/devicetree.cb +++ b/src/mainboard/digitallogic/msm800sev/devicetree.cb @@ -1,9 +1,9 @@ chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end + device domain 0 on + device pci 1.0 on end device pci 1.1 on end - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK # SIRQ Mode = Active(Quiet) mode. Save power.... # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK # How to get these? Boot linux and do this: @@ -25,43 +25,43 @@ chip northbridge/amd/lx register "com2_address" = "0x2F8" register "com2_irq" = "3" register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci f.0 on # ISA Bridge + device pci f.0 on # ISA Bridge chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy + device pnp 2e.0 off # Floppy io 0x60 = 0x3f0 irq 0x70 = 6 drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port + device pnp 2e.1 off # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 end - device pnp 2e.2 on # Com1 + device pnp 2e.2 on # Com1 io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.3 on # Com2 + device pnp 2e.3 on # Com2 io 0x60 = 0x2f8 irq 0x70 = 3 end - device pnp 2e.5 on # Keyboard + device pnp 2e.5 on # Keyboard io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 irq 0x72 = 12 end - device pnp 2e.6 off # CIR + device pnp 2e.6 off # CIR io 0x60 = 0x100 end - device pnp 2e.7 off # GAME_MIDI_GIPO1 + device pnp 2e.7 off # GAME_MIDI_GIPO1 io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor io 0x60 = 0x290 irq 0x70 = 5 end @@ -69,10 +69,10 @@ chip northbridge/amd/lx end device pci f.1 on end # Flash controller device pci f.2 on end # IDE controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI + device pci f.3 on end # Audio + device pci f.4 on end # OHCI device pci f.5 on end # EHCI - end + end end
# APIC cluster is late CPU init. diff --git a/src/mainboard/eaglelion/5bcm/devicetree.cb b/src/mainboard/eaglelion/5bcm/devicetree.cb index 33f1f90..5600b4d 100644 --- a/src/mainboard/eaglelion/5bcm/devicetree.cb +++ b/src/mainboard/eaglelion/5bcm/devicetree.cb @@ -1,52 +1,50 @@ chip northbridge/amd/gx1 - device domain 0 on - device pci 0.0 on end - chip southbridge/amd/cs5530 - device pci 12.0 on - chip superio/nsc/pc97317 - device pnp 2e.0 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.1 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.2 on # RTC - io 0x60 = 0x70 - irq 0x70 = 8 - end - device pnp 2e.3 off # FDC - end - device pnp 2e.4 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.5 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.6 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.7 on # GPIO - io 0x60 = 0xe0 - end - device pnp 2e.8 on # Power Management - io 0x60 = 0xe800 - end - end - device pci 12.1 off end # SMI - device pci 12.2 on end # IDE - device pci 12.3 off end # Audio - device pci 12.4 off end # VGA - end - end - end - - chip cpu/amd/geode_gx1 - end + device domain 0 on + device pci 0.0 on end + chip southbridge/amd/cs5530 + device pci 12.0 on + chip superio/nsc/pc97317 + device pnp 2e.0 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.1 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.2 on # RTC + io 0x60 = 0x70 + irq 0x70 = 8 + end + device pnp 2e.3 off # FDC + end + device pnp 2e.4 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.5 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.6 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.7 on # GPIO + io 0x60 = 0xe0 + end + device pnp 2e.8 on # Power Management + io 0x60 = 0xe800 + end + end + device pci 12.1 off end # SMI + device pci 12.2 on end # IDE + device pci 12.3 off end # Audio + device pci 12.4 off end # VGA + end + end + end
+ chip cpu/amd/geode_gx1 + end end - diff --git a/src/mainboard/gizmosphere/gizmo/devicetree.cb b/src/mainboard/gizmosphere/gizmo/devicetree.cb index 301f79a..c13f44c 100755 --- a/src/mainboard/gizmosphere/gizmo/devicetree.cb +++ b/src/mainboard/gizmosphere/gizmo/devicetree.cb @@ -20,39 +20,39 @@ chip northbridge/amd/agesa/family14/root_complex device cpu_cluster 0 on chip cpu/amd/agesa/family14 - device lapic 0 on end + device lapic 0 on end end end device domain 0 on subsystemid 0x1022 0x1510 inherit chip northbridge/amd/agesa/family14 # CPU side of HT root complex chip northbridge/amd/agesa/family14 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 - device pci 4.0 off end # PCIE P2P bridge 0x9604 - device pci 5.0 on end # PCIE P2P bridge 0x9605 - device pci 6.0 off end # PCIE P2P bridge 0x9606 - device pci 7.0 off end # PCIE P2P bridge 0x9607 - device pci 8.0 off end # NB/SB Link P2P bridge + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 + device pci 4.0 off end # PCIE P2P bridge 0x9604 + device pci 5.0 on end # PCIE P2P bridge 0x9605 + device pci 6.0 off end # PCIE P2P bridge 0x9606 + device pci 7.0 off end # PCIE P2P bridge 0x9607 + device pci 8.0 off end # NB/SB Link P2P bridge end # agesa northbridge
- chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.1 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.1 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on end # LPC 0x439d - device pci 14.4 on end # PCIB 0x4384, NOTE: this device must always be enabled or removed - device pci 14.5 off end # USB 2 - device pci 15.0 on end # PCIe PortA # PCIe x4 slot off of high speed edge connector - device pci 16.0 off end # OHCI USB3 - device pci 16.2 off end # EHCI USB3 + chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.1 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.1 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on end # LPC 0x439d + device pci 14.4 on end # PCIB 0x4384, NOTE: this device must always be enabled or removed + device pci 14.5 off end # USB 2 + device pci 15.0 on end # PCIe PortA # PCIe x4 slot off of high speed edge connector + device pci 16.0 off end # OHCI USB3 + device pci 16.2 off end # EHCI USB3 register "gpp_configuration" = "0" #4:0:0:0 register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE end #southbridge/amd/cimx/sb800 diff --git a/src/mainboard/ibase/mb899/devicetree.cb b/src/mainboard/ibase/mb899/devicetree.cb index c304908..fba768d 100644 --- a/src/mainboard/ibase/mb899/devicetree.cb +++ b/src/mainboard/ibase/mb899/devicetree.cb @@ -22,9 +22,9 @@ chip northbridge/intel/i945 register "pirqh_routing" = "0x06"
# GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) register "gpi13_routing" = "1"
register "ide_legacy_combined" = "0x0" @@ -96,9 +96,9 @@ chip northbridge/intel/i945 end end # chip superio/winbond/w83627ehg end # LPC bridge - device pci 1f.1 on end # IDE - device pci 1f.2 on end # SATA - device pci 1f.3 on end # SMBus + device pci 1f.1 on end # IDE + device pci 1f.2 on end # SATA + device pci 1f.3 on end # SMBus # device pci 1f.4 off end # Realtek ID Codec end # chip southbridge/intel/i82801gx
diff --git a/src/mainboard/ibm/e325/devicetree.cb b/src/mainboard/ibm/e325/devicetree.cb index bdaee50..a83d30d 100644 --- a/src/mainboard/ibm/e325/devicetree.cb +++ b/src/mainboard/ibm/e325/devicetree.cb @@ -6,8 +6,8 @@ chip northbridge/amd/amdk8/root_complex end device domain 0 on chip northbridge/amd/amdk8 - device pci 18.0 on end # LDT 0 - device pci 18.0 on # LDT 1 + device pci 18.0 on end # LDT 0 + device pci 18.0 on # LDT 1 chip southbridge/amd/amd8131 device pci 0.0 on end device pci 0.1 on end @@ -23,34 +23,34 @@ chip northbridge/amd/amdk8/root_complex end device pci 1.0 on chip superio/nsc/pc87366 - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 irq 0x70 = 6 drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 irq 0x70 = 7 end - device pnp 2e.2 off # Com 2 - io 0x60 = 0x2f8 + device pnp 2e.2 off # Com 2 + io 0x60 = 0x2f8 irq 0x70 = 3 end - device pnp 2e.3 on # Com 1 - io 0x60 = 0x3f8 + device pnp 2e.3 on # Com 1 + io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.4 off end # SWC - device pnp 2e.5 off end # Mouse - device pnp 2e.6 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 + device pnp 2e.4 off end # SWC + device pnp 2e.5 off end # Mouse + device pnp 2e.6 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 irq 0x70 = 1 end - device pnp 2e.7 off end # GPIO - device pnp 2e.8 off end # ACB - device pnp 2e.9 off end # FSCM - device pnp 2e.a off end # WDT + device pnp 2e.7 off end # GPIO + device pnp 2e.8 off end # ACB + device pnp 2e.9 off end # FSCM + device pnp 2e.a off end # WDT end end device pci 1.1 on end @@ -59,7 +59,7 @@ chip northbridge/amd/amdk8/root_complex device pci 1.5 off end device pci 1.6 off end end - end # device pci 18.0 + end # device pci 18.0 device pci 18.0 on end # LDT2 device pci 18.1 on end device pci 18.2 on end @@ -67,4 +67,3 @@ chip northbridge/amd/amdk8/root_complex end end end - diff --git a/src/mainboard/ibm/e326/devicetree.cb b/src/mainboard/ibm/e326/devicetree.cb index 1888987..fefc6a9 100644 --- a/src/mainboard/ibm/e326/devicetree.cb +++ b/src/mainboard/ibm/e326/devicetree.cb @@ -7,8 +7,8 @@ chip northbridge/amd/amdk8/root_complex
device domain 0 on chip northbridge/amd/amdk8 - device pci 18.0 on end # LDT 0 - device pci 18.0 on # LDT 1 + device pci 18.0 on end # LDT 0 + device pci 18.0 on # LDT 1 chip southbridge/amd/amd8131 device pci 0.0 on end device pci 0.1 on end @@ -21,38 +21,38 @@ chip northbridge/amd/amdk8/root_complex device pci 0.1 on end device pci 0.2 on end device pci 1.0 off end - device pci 5.0 on end # ATI Rage XL + device pci 5.0 on end # ATI Rage XL end device pci 1.0 on chip superio/nsc/pc87366 - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 irq 0x70 = 6 drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 irq 0x70 = 7 end - device pnp 2e.2 off # Com 2 - io 0x60 = 0x2f8 + device pnp 2e.2 off # Com 2 + io 0x60 = 0x2f8 irq 0x70 = 3 end - device pnp 2e.3 on # Com 1 - io 0x60 = 0x3f8 + device pnp 2e.3 on # Com 1 + io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.4 off end # SWC - device pnp 2e.5 off end # Mouse - device pnp 2e.6 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 + device pnp 2e.4 off end # SWC + device pnp 2e.5 off end # Mouse + device pnp 2e.6 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 irq 0x70 = 1 end - device pnp 2e.7 off end # GPIO - device pnp 2e.8 off end # ACB - device pnp 2e.9 off end # FSCM - device pnp 2e.a off end # WDT + device pnp 2e.7 off end # GPIO + device pnp 2e.8 off end # ACB + device pnp 2e.9 off end # FSCM + device pnp 2e.a off end # WDT end end device pci 1.1 on end @@ -63,7 +63,7 @@ chip northbridge/amd/amdk8/root_complex register "ide0_enable" = "1" register "ide1_enable" = "1" end - end # device pci 18.0 + end # device pci 18.0 device pci 18.0 on end # LDT2 device pci 18.1 on end device pci 18.2 on end @@ -71,4 +71,3 @@ chip northbridge/amd/amdk8/root_complex end end end - diff --git a/src/mainboard/intel/d810e2cb/devicetree.cb b/src/mainboard/intel/d810e2cb/devicetree.cb index 8b67c5a..2caac6b 100644 --- a/src/mainboard/intel/d810e2cb/devicetree.cb +++ b/src/mainboard/intel/d810e2cb/devicetree.cb @@ -18,65 +18,65 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ##
-chip northbridge/intel/i82810 # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/socket_FC_PGA370 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Graphics Memory Controller Hub (GMCH) - device pci 1.0 on end # Chipset Graphics Controller (CGC) - chip southbridge/intel/i82801bx # Southbridge - register "pirqa_routing" = "0x05" - register "pirqb_routing" = "0x06" - register "pirqc_routing" = "0x07" - register "pirqd_routing" = "0x09" - register "pirqe_routing" = "0x0a" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x0b" +chip northbridge/intel/i82810 # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/socket_FC_PGA370 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Graphics Memory Controller Hub (GMCH) + device pci 1.0 on end # Chipset Graphics Controller (CGC) + chip southbridge/intel/i82801bx # Southbridge + register "pirqa_routing" = "0x05" + register "pirqb_routing" = "0x06" + register "pirqc_routing" = "0x07" + register "pirqd_routing" = "0x09" + register "pirqe_routing" = "0x0a" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x0b"
- register "ide0_enable" = "1" - register "ide1_enable" = "1" + register "ide0_enable" = "1" + register "ide1_enable" = "1"
- device pci 1e.0 on end # PCI bridge - device pci 1f.0 on # ISA bridge - chip superio/smsc/smscsuperio # Super I/O (SMSC LPC47M102) - device pnp 4e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 4 - end - device pnp 4e.4 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.5 off end # COM2 - device pnp 4e.7 on # PS/2 keyboard / mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 4e.9 off end # Game port - device pnp 4e.a on # Runtime registers - io 0x60 = 0x800 - end - device pnp 4e.b off end # MPU-401 - end - end - device pci 1f.1 on end # IDE - device pci 1f.2 on end # USB - device pci 1f.3 on end # SMbus - device pci 1f.4 on end # USB - device pci 1f.5 on end # Audio controller - device pci 1f.6 off end # Modem controller - end - end + device pci 1e.0 on end # PCI bridge + device pci 1f.0 on # ISA bridge + chip superio/smsc/smscsuperio # Super I/O (SMSC LPC47M102) + device pnp 4e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 4e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 4 + end + device pnp 4e.4 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.5 off end # COM2 + device pnp 4e.7 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 4e.9 off end # Game port + device pnp 4e.a on # Runtime registers + io 0x60 = 0x800 + end + device pnp 4e.b off end # MPU-401 + end + end + device pci 1f.1 on end # IDE + device pci 1f.2 on end # USB + device pci 1f.3 on end # SMbus + device pci 1f.4 on end # USB + device pci 1f.5 on end # Audio controller + device pci 1f.6 off end # Modem controller + end + end end diff --git a/src/mainboard/kontron/kt690/devicetree.cb b/src/mainboard/kontron/kt690/devicetree.cb index 22bdae9..268356a 100644 --- a/src/mainboard/kontron/kt690/devicetree.cb +++ b/src/mainboard/kontron/kt690/devicetree.cb @@ -1,7 +1,7 @@ #Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) #Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) #Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. +# 1: the system allows a PCIE link to be established on Dev2 or Dev3. #Define gfx_dual_slot, 0: single slot, 1: dual slot #Define gfx_lane_reversal, 0: disable lane reversal, 1: enable #Define gfx_tmds, 0: didn't support TMDS, 1: support @@ -17,19 +17,19 @@ chip northbridge/amd/amdk8/root_complex device domain 0 on subsystemid 0x1488 0x6900 inherit chip northbridge/amd/amdk8 - device pci 18.0 on # southbridge + device pci 18.0 on # southbridge chip southbridge/amd/rs690 - device pci 0.0 on end # HT 0x7910 - device pci 1.0 on # Internal Graphics P2P bridge 0x7912 + device pci 0.0 on end # HT 0x7910 + device pci 1.0 on # Internal Graphics P2P bridge 0x7912 device pci 5.0 on end # Internal Graphics 0x791F end - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 - device pci 3.0 off end # PCIE P2P bridge 0x791b - device pci 4.0 on end # PCIE P2P bridge 0x7914 - device pci 5.0 on end # PCIE P2P bridge 0x7915 - device pci 6.0 on end # PCIE P2P bridge 0x7916 - device pci 7.0 on end # PCIE P2P bridge 0x7917 - device pci 8.0 off end # NB/SB Link P2P bridge + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 + device pci 3.0 off end # PCIE P2P bridge 0x791b + device pci 4.0 on end # PCIE P2P bridge 0x7914 + device pci 5.0 on end # PCIE P2P bridge 0x7915 + device pci 6.0 on end # PCIE P2P bridge 0x7916 + device pci 7.0 on end # PCIE P2P bridge 0x7917 + device pci 8.0 off end # NB/SB Link P2P bridge register "gpp_configuration" = "4" register "port_enable" = "0xfc" register "gfx_dev2_dev3" = "1" @@ -40,15 +40,15 @@ chip northbridge/amd/amdk8/root_complex register "gfx_reconfiguration" = "1" register "gfx_link_width" = "0" end - chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus - device pci 12.0 on end # SATA 0x4380 - device pci 13.0 on end # USB 0x4387 - device pci 13.1 on end # USB 0x4388 - device pci 13.2 on end # USB 0x4389 - device pci 13.3 on end # USB 0x438a - device pci 13.4 on end # USB 0x438b - device pci 13.5 on end # USB 2 0x4386 - device pci 14.0 on # SM 0x4385 + chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus + device pci 12.0 on end # SATA 0x4380 + device pci 13.0 on end # USB 0x4387 + device pci 13.1 on end # USB 0x4388 + device pci 13.2 on end # USB 0x4389 + device pci 13.3 on end # USB 0x438a + device pci 13.4 on end # USB 0x438b + device pci 13.5 on end # USB 2 0x4386 + device pci 14.0 on # SM 0x4385 chip drivers/generic/generic #dimm 0-0-0 device i2c 50 on end end @@ -56,52 +56,52 @@ chip northbridge/amd/amdk8/root_complex device i2c 51 on end end end # SM - device pci 14.1 on end # IDE 0x438c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x438d + device pci 14.1 on end # IDE 0x438c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x438d chip superio/winbond/w83627dhg - device pnp 2e.0 off # Floppy + device pnp 2e.0 off # Floppy io 0x60 = 0x3f0 irq 0x70 = 6 drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port + device pnp 2e.1 off # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 end - device pnp 2e.2 on # Com1 + device pnp 2e.2 on # Com1 io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.3 on # Com2 + device pnp 2e.3 on # Com2 io 0x60 = 0x2f8 irq 0x70 = 3 end - device pnp 2e.5 on # Keyboard + device pnp 2e.5 on # Keyboard io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 end - #device pnp 2e.6 off # SPI + #device pnp 2e.6 off # SPI #end - device pnp 2e.307 off # GPIO 1 + device pnp 2e.307 off # GPIO 1 end - device pnp 2e.8 on # WDTO#, PLED + device pnp 2e.8 on # WDTO#, PLED end - device pnp 2e.009 off # GPIO2 + device pnp 2e.009 off # GPIO2 end - device pnp 2e.109 off # GPIO3 + device pnp 2e.109 off # GPIO3 end - device pnp 2e.209 off # GPIO4 + device pnp 2e.209 off # GPIO4 end - device pnp 2e.309 off # GPIO5 + device pnp 2e.309 off # GPIO5 end - device pnp 2e.a off # ACPI + device pnp 2e.a off # ACPI end - device pnp 2e.b on # HWM + device pnp 2e.b on # HWM io 0x60 = 0xa10 end - device pnp 2e.c off # PECI, SST + device pnp 2e.c off # PECI, SST end end #superio/winbond/w83627dhg #chip superio/smsc/fdc37n972 @@ -113,7 +113,7 @@ chip northbridge/amd/amdk8/root_complex device pci 14.6 on end # MCI 0x438e register "hda_viddid" = "0x10ec0888" end #southbridge/amd/sb600 - end # device pci 18.0 + end # device pci 18.0
device pci 18.0 on end device pci 18.0 on end diff --git a/src/mainboard/lanner/em8510/devicetree.cb b/src/mainboard/lanner/em8510/devicetree.cb index 257d894..02a966b 100644 --- a/src/mainboard/lanner/em8510/devicetree.cb +++ b/src/mainboard/lanner/em8510/devicetree.cb @@ -13,39 +13,39 @@ chip northbridge/intel/i855 register "enable_usb" = "0" register "enable_native_ide" = "0" device pci 1f.0 on - chip superio/winbond/w83627thg # link 1 - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 + chip superio/winbond/w83627thg # link 1 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 end - device pnp 2e.1 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 irq 0x72 = 12 end - device pnp 2e.7 off end # GAME_MIDI_GIPO1 - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 + device pnp 2e.7 off end # GAME_MIDI_GIPO1 + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 end end - end + end end end device cpu_cluster 0 on diff --git a/src/mainboard/lenovo/t520/devicetree.cb b/src/mainboard/lenovo/t520/devicetree.cb index 475e49c..74e71cc 100644 --- a/src/mainboard/lenovo/t520/devicetree.cb +++ b/src/mainboard/lenovo/t520/devicetree.cb @@ -47,9 +47,9 @@ chip northbridge/intel/sandybridge register "pirqh_routing" = "0x80"
# GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) register "alt_gp_smi_en" = "0x0000" register "gpi1_routing" = "2" register "gpi8_routing" = "2" @@ -122,7 +122,7 @@ chip northbridge/intel/sandybridge end # LPC bridge device pci 1f.2 on end # SATA Controller 1 device pci 1f.3 on # SMBUS controller - # eeprom, 8 virtual devices, same chip + # eeprom, 8 virtual devices, same chip chip drivers/i2c/at24rf08c device i2c 54 on end device i2c 55 on end diff --git a/src/mainboard/lenovo/t530/devicetree.cb b/src/mainboard/lenovo/t530/devicetree.cb index 6a09004..bca52f6 100644 --- a/src/mainboard/lenovo/t530/devicetree.cb +++ b/src/mainboard/lenovo/t530/devicetree.cb @@ -48,9 +48,9 @@ chip northbridge/intel/sandybridge register "pirqh_routing" = "0x80"
# GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) register "alt_gp_smi_en" = "0x0000" register "gpi1_routing" = "2" register "gpi8_routing" = "2" @@ -128,7 +128,7 @@ chip northbridge/intel/sandybridge end # LPC bridge device pci 1f.2 on end # SATA Controller 1 device pci 1f.3 on - # eeprom, 8 virtual devices, same chip + # eeprom, 8 virtual devices, same chip chip drivers/i2c/at24rf08c device i2c 54 on end device i2c 55 on end diff --git a/src/mainboard/lenovo/t60/devicetree.cb b/src/mainboard/lenovo/t60/devicetree.cb index f092380..2ca0ce1 100644 --- a/src/mainboard/lenovo/t60/devicetree.cb +++ b/src/mainboard/lenovo/t60/devicetree.cb @@ -56,9 +56,9 @@ chip northbridge/intel/i945 register "pirqh_routing" = "0x0b"
# GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) register "gpi13_routing" = "2" register "gpi12_routing" = "2" register "gpi8_routing" = "2" @@ -213,7 +213,7 @@ chip northbridge/intel/i945 register "reg11" = "0x07" device i2c 69 on end end - # eeprom, 8 virtual devices, same chip + # eeprom, 8 virtual devices, same chip chip drivers/i2c/at24rf08c device i2c 54 on end device i2c 55 on end diff --git a/src/mainboard/lenovo/x201/devicetree.cb b/src/mainboard/lenovo/x201/devicetree.cb index 1db5bf0..aa0962f 100644 --- a/src/mainboard/lenovo/x201/devicetree.cb +++ b/src/mainboard/lenovo/x201/devicetree.cb @@ -103,9 +103,9 @@ chip northbridge/intel/nehalem register "pirqh_routing" = "0x0b"
# GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) register "gpi1_routing" = "2" register "gpi13_routing" = "2"
@@ -163,7 +163,7 @@ chip northbridge/intel/nehalem end device pci 1f.3 on # SMBUS subsystemid 0x17aa 0x2167 - # eeprom, 8 virtual devices, same chip + # eeprom, 8 virtual devices, same chip chip drivers/i2c/at24rf08c device i2c 54 on end device i2c 55 on end diff --git a/src/mainboard/lenovo/x230/devicetree.cb b/src/mainboard/lenovo/x230/devicetree.cb index a76de5f..728fa9a 100644 --- a/src/mainboard/lenovo/x230/devicetree.cb +++ b/src/mainboard/lenovo/x230/devicetree.cb @@ -48,9 +48,9 @@ chip northbridge/intel/sandybridge register "pirqh_routing" = "0x80"
# GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) register "alt_gp_smi_en" = "0x0000" register "gpi1_routing" = "2" register "gpi8_routing" = "2" @@ -128,7 +128,7 @@ chip northbridge/intel/sandybridge end # LPC bridge device pci 1f.2 on end # SATA Controller 1 device pci 1f.3 on - # eeprom, 8 virtual devices, same chip + # eeprom, 8 virtual devices, same chip chip drivers/i2c/at24rf08c device i2c 54 on end device i2c 55 on end diff --git a/src/mainboard/lenovo/x60/devicetree.cb b/src/mainboard/lenovo/x60/devicetree.cb index 81648bd..15a95d4 100644 --- a/src/mainboard/lenovo/x60/devicetree.cb +++ b/src/mainboard/lenovo/x60/devicetree.cb @@ -49,9 +49,9 @@ chip northbridge/intel/i945 register "pirqh_routing" = "0x0b"
# GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) register "gpi13_routing" = "2" register "gpi12_routing" = "1" register "gpi8_routing" = "2" @@ -193,7 +193,7 @@ chip northbridge/intel/i945 register "reg11" = "0x07" device i2c 69 on end end - # eeprom, 8 virtual devices, same chip + # eeprom, 8 virtual devices, same chip chip drivers/i2c/at24rf08c device i2c 54 on end device i2c 55 on end diff --git a/src/mainboard/lippert/frontrunner-af/devicetree.cb b/src/mainboard/lippert/frontrunner-af/devicetree.cb index f77c973..87c57ac 100644 --- a/src/mainboard/lippert/frontrunner-af/devicetree.cb +++ b/src/mainboard/lippert/frontrunner-af/devicetree.cb @@ -25,7 +25,7 @@ chip northbridge/amd/agesa/family14/root_complex device domain 0 on subsystemid 0x1022 0x1510 inherit chip northbridge/amd/agesa/family14 # CPU side of HT root complex -# device pci 18.0 on # northbridge +# device pci 18.0 on # northbridge chip northbridge/amd/agesa/family14 # PCI side of HT root complex device pci 0.0 on end # Root Complex device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] @@ -76,19 +76,19 @@ chip northbridge/amd/agesa/family14/root_complex end end # smscsuperio end #LPC - device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} + device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} device pci 14.5 off end # OHCI FS/LS USB device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) device pci 15.0 off end # PCIe PortA device pci 15.1 off end # PCIe PortB device pci 15.2 off end # PCIe PortC device pci 15.3 off end # PCIe PortD - device pci 16.0 on end # OHCI USB 10-13 - device pci 16.2 on end # EHCI USB 10-13 + device pci 16.0 on end # OHCI USB 10-13 + device pci 16.2 on end # EHCI USB 10-13 register "gpp_configuration" = "4" #1:1:1:1 register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE end #southbridge/amd/cimx/sb800 -# end # device pci 18.0 +# end # device pci 18.0 # These seem unnecessary device pci 18.0 on end device pci 18.1 on end diff --git a/src/mainboard/lippert/toucan-af/devicetree.cb b/src/mainboard/lippert/toucan-af/devicetree.cb index afd6b25..40b5e84 100644 --- a/src/mainboard/lippert/toucan-af/devicetree.cb +++ b/src/mainboard/lippert/toucan-af/devicetree.cb @@ -25,7 +25,7 @@ chip northbridge/amd/agesa/family14/root_complex device domain 0 on subsystemid 0x1022 0x1510 inherit chip northbridge/amd/agesa/family14 # CPU side of HT root complex -# device pci 18.0 on # northbridge +# device pci 18.0 on # northbridge chip northbridge/amd/agesa/family14 # PCI side of HT root complex device pci 0.0 on end # Root Complex device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] @@ -85,16 +85,16 @@ chip northbridge/amd/agesa/family14/root_complex device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} device pci 14.5 off end # OHCI FS/LS USB device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) - device pci 15.0 on end # PCIe PortA - device pci 15.1 on end # PCIe PortB - device pci 15.2 on end # PCIe PortC - device pci 15.3 on end # PCIe PortD + device pci 15.0 on end # PCIe PortA + device pci 15.1 on end # PCIe PortB + device pci 15.2 on end # PCIe PortC + device pci 15.3 on end # PCIe PortD device pci 16.0 off end # OHCI USB 10-13 device pci 16.2 off end # EHCI USB 10-13 register "gpp_configuration" = "4" #1:1:1:1 register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE end #southbridge/amd/cimx/sb800 -# end # device pci 18.0 +# end # device pci 18.0 # These seem unnecessary device pci 18.0 on end device pci 18.1 on end diff --git a/src/mainboard/mitac/6513wu/devicetree.cb b/src/mainboard/mitac/6513wu/devicetree.cb index 9694fc4..d49bc20 100644 --- a/src/mainboard/mitac/6513wu/devicetree.cb +++ b/src/mainboard/mitac/6513wu/devicetree.cb @@ -18,67 +18,67 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ##
-chip northbridge/intel/i82810 # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/socket_PGA370 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Graphics Memory Controller Hub (GMCH) - device pci 1.0 on end - chip southbridge/intel/i82801ax # Southbridge - register "pirqa_routing" = "0x03" - register "pirqb_routing" = "0x05" - register "pirqc_routing" = "0x09" - register "pirqd_routing" = "0x0b" +chip northbridge/intel/i82810 # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/socket_PGA370 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Graphics Memory Controller Hub (GMCH) + device pci 1.0 on end + chip southbridge/intel/i82801ax # Southbridge + register "pirqa_routing" = "0x03" + register "pirqb_routing" = "0x05" + register "pirqc_routing" = "0x09" + register "pirqd_routing" = "0x0b"
- register "ide0_enable" = "1" - register "ide1_enable" = "1" + register "ide0_enable" = "1" + register "ide1_enable" = "1"
- device pci 1e.0 on # PCI bridge - device pci 5.0 on end # Audio controller (ESS ES1988) - end - device pci 1f.0 on # ISA bridge - chip superio/smsc/smscsuperio # Super I/O (SMSC LPC47U332) - device pnp 4e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 4e.4 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.5 on # MIDI port (MPU-401) - io 0x60 = 0x330 - irq 0x70 = 10 - end - device pnp 4e.7 on # PS/2 keyboard / mouse - io 0x60 = 0x60 # XXX: not relocatable - io 0x62 = 0x64 # XXX: not relocatable - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 4e.9 on # Game port - io 0x60 = 0x201 - end - device pnp 4e.a on # Runtime registers - io 0x60 = 0x400 - end - device pnp 4e.b off end # SMBus - end - end - device pci 1f.1 on end # IDE - device pci 1f.2 on end # USB - device pci 1f.3 on end # SMbus - device pci 1f.5 off end # Audio controller - device pci 1f.6 off end # Modem - end - end + device pci 1e.0 on # PCI bridge + device pci 5.0 on end # Audio controller (ESS ES1988) + end + device pci 1f.0 on # ISA bridge + chip superio/smsc/smscsuperio # Super I/O (SMSC LPC47U332) + device pnp 4e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 4e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 4e.4 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.5 on # MIDI port (MPU-401) + io 0x60 = 0x330 + irq 0x70 = 10 + end + device pnp 4e.7 on # PS/2 keyboard / mouse + io 0x60 = 0x60 # XXX: not relocatable + io 0x62 = 0x64 # XXX: not relocatable + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 4e.9 on # Game port + io 0x60 = 0x201 + end + device pnp 4e.a on # Runtime registers + io 0x60 = 0x400 + end + device pnp 4e.b off end # SMBus + end + end + device pci 1f.1 on end # IDE + device pci 1f.2 on end # USB + device pci 1f.3 on end # SMbus + device pci 1f.5 off end # Audio controller + device pci 1f.6 off end # Modem + end + end end diff --git a/src/mainboard/msi/ms6119/devicetree.cb b/src/mainboard/msi/ms6119/devicetree.cb index 159a444..ec2503b 100644 --- a/src/mainboard/msi/ms6119/devicetree.cb +++ b/src/mainboard/msi/ms6119/devicetree.cb @@ -1,60 +1,60 @@ chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 7.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.9 on # GPIO 3 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 7.1 on end # IDE - device pci 7.2 on end # USB - device pci 7.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" - end - end + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.9 on # GPIO 3 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end end diff --git a/src/mainboard/msi/ms6147/devicetree.cb b/src/mainboard/msi/ms6147/devicetree.cb index 55f2745..7b16672 100644 --- a/src/mainboard/msi/ms6147/devicetree.cb +++ b/src/mainboard/msi/ms6147/devicetree.cb @@ -1,60 +1,60 @@ chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 7.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.9 off # GPIO 3 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 7.1 on end # IDE - device pci 7.2 on end # USB - device pci 7.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "1" - register "ide0_drive1_udma33_enable" = "1" - register "ide1_drive0_udma33_enable" = "1" - register "ide1_drive1_udma33_enable" = "1" - end - end + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.9 off # GPIO 3 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "1" + register "ide0_drive1_udma33_enable" = "1" + register "ide1_drive0_udma33_enable" = "1" + register "ide1_drive1_udma33_enable" = "1" + end + end end diff --git a/src/mainboard/msi/ms6178/devicetree.cb b/src/mainboard/msi/ms6178/devicetree.cb index 26e0e0a..a49231c 100644 --- a/src/mainboard/msi/ms6178/devicetree.cb +++ b/src/mainboard/msi/ms6178/devicetree.cb @@ -19,66 +19,66 @@ ##
chip northbridge/intel/i82810 # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/socket_PGA370 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on - device pci 0.0 on end # Host bridge - device pci 1.0 on end # Onboard VGA - chip southbridge/intel/i82801ax # Southbridge - register "ide0_enable" = "1" - register "ide1_enable" = "1" + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/socket_PGA370 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on + device pci 0.0 on end # Host bridge + device pci 1.0 on end # Onboard VGA + chip southbridge/intel/i82801ax # Southbridge + register "ide0_enable" = "1" + register "ide1_enable" = "1"
- device pci 1e.0 on end # PCI bridge - device pci 1f.0 on # ISA/LPC bridge - chip superio/winbond/w83627hf # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 (only header on board) - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard/mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # Keyboard interrupt - irq 0x72 = 12 # Mouse interrupt - end - device pnp 2e.6 off end # Consumer IR (TODO) - device pnp 2e.7 on # Game port / MIDI / GPIO 1 - io 0x60 = 0x201 - io 0x62 = 0x330 - irq 0x70 = 9 - end - device pnp 2e.8 on end # GPIO 2 - device pnp 2e.9 on end # GPIO 3 - device pnp 2e.a on end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1f.1 on end # IDE - device pci 1f.2 on end # USB - device pci 1f.3 on end # SMBus - device pci 1f.5 on end # AC'97 audio - device pci 1f.6 on end # AC'97 modem - end - end + device pci 1e.0 on end # PCI bridge + device pci 1f.0 on # ISA/LPC bridge + chip superio/winbond/w83627hf # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 (only header on board) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard/mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # Keyboard interrupt + irq 0x72 = 12 # Mouse interrupt + end + device pnp 2e.6 off end # Consumer IR (TODO) + device pnp 2e.7 on # Game port / MIDI / GPIO 1 + io 0x60 = 0x201 + io 0x62 = 0x330 + irq 0x70 = 9 + end + device pnp 2e.8 on end # GPIO 2 + device pnp 2e.9 on end # GPIO 3 + device pnp 2e.a on end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1f.1 on end # IDE + device pci 1f.2 on end # USB + device pci 1f.3 on end # SMBus + device pci 1f.5 on end # AC'97 audio + device pci 1f.6 on end # AC'97 modem + end + end end
diff --git a/src/mainboard/msi/ms7260/devicetree.cb b/src/mainboard/msi/ms7260/devicetree.cb index 717ad00..e526625 100644 --- a/src/mainboard/msi/ms7260/devicetree.cb +++ b/src/mainboard/msi/ms7260/devicetree.cb @@ -1,143 +1,143 @@ chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_AM2 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x1462 0x7260 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627ehg # Super I/O - device pnp 4e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 4e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.3 on # Com2 / IrDA - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard IRQ - irq 0x72 = 12 # PS/2 mouse IRQ - end - device pnp 4e.106 off # Serial flash interface (SFI) - # io 0x62 = 0x100 - end - device pnp 4e.007 off # GPIO 1 - end - device pnp 4e.107 off # Game port - # io 0x60 = 0x220 # Datasheet: 0x201 - end - device pnp 4e.207 off # MIDI - # io 0x62 = 0x300 # Datasheet: 0x330 - # irq 0x70 = 9 - end - device pnp 4e.307 off # GPIO 6 - end - device pnp 4e.8 off # WDTO#, PLED - end - device pnp 4e.009 off # GPIO 2 - end - device pnp 4e.109 off # GPIO 3 - end - device pnp 4e.209 off # GPIO 4 - end - device pnp 4e.309 off # GPIO 5 - end - device pnp 4e.a off # ACPI - end - device pnp 4e.b on # Hardware monitor - io 0x60 = 0xa10 - # TODO: IRQ? - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - end - # TODO: Check if the stuff below is correct / needed. - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 off end # SATA 2 (N/A on this board) - device pci 6.0 on end # PCI - device pci 6.1 on end # AZA (HD Audio) - device pci 8.0 on end # NIC - device pci 9.0 off end # NIC (N/A on this board) - device pci a.0 off end # PCI E 5 (N/A on this board?) - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # TODO: Check the two lines below. - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_AM2 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x1462 0x7260 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627ehg # Super I/O + device pnp 4e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 4e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 4e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.3 on # Com2 / IrDA + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 4e.5 on # PS/2 keyboard & mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard IRQ + irq 0x72 = 12 # PS/2 mouse IRQ + end + device pnp 4e.106 off # Serial flash interface (SFI) + # io 0x62 = 0x100 + end + device pnp 4e.007 off # GPIO 1 + end + device pnp 4e.107 off # Game port + # io 0x60 = 0x220 # Datasheet: 0x201 + end + device pnp 4e.207 off # MIDI + # io 0x62 = 0x300 # Datasheet: 0x330 + # irq 0x70 = 9 + end + device pnp 4e.307 off # GPIO 6 + end + device pnp 4e.8 off # WDTO#, PLED + end + device pnp 4e.009 off # GPIO 2 + end + device pnp 4e.109 off # GPIO 3 + end + device pnp 4e.209 off # GPIO 4 + end + device pnp 4e.309 off # GPIO 5 + end + device pnp 4e.a off # ACPI + end + device pnp 4e.b on # Hardware monitor + io 0x60 = 0xa10 + # TODO: IRQ? + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + end + # TODO: Check if the stuff below is correct / needed. + device pci 1.1 on # SM 1 + # PCI device SMBus address will + # depend on addon PCI device, do + # we need to scan_smbus_bus? + # chip drivers/generic/generic # PCIXA slot 1 + # device i2c 50 on end + # end + # chip drivers/generic/generic # PCIXB slot 1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # PCIXB slot 2 + # device i2c 52 on end + # end + # chip drivers/generic/generic # PCI slot 1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # Master MCP55 PCI-E + # device i2c 54 on end + # end + # chip drivers/generic/generic # Slave MCP55 PCI-E + # device i2c 55 on end + # end + chip drivers/generic/generic # MAC EEPROM + device i2c 51 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 off end # SATA 2 (N/A on this board) + device pci 6.0 on end # PCI + device pci 6.1 on end # AZA (HD Audio) + device pci 8.0 on end # NIC + device pci 9.0 off end # NIC (N/A on this board) + device pci a.0 off end # PCI E 5 (N/A on this board?) + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # TODO: Check the two lines below. + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.0 on end # Link 1 + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end end diff --git a/src/mainboard/msi/ms9185/devicetree.cb b/src/mainboard/msi/ms9185/devicetree.cb index 013bba3..3a38e10 100644 --- a/src/mainboard/msi/ms9185/devicetree.cb +++ b/src/mainboard/msi/ms9185/devicetree.cb @@ -9,79 +9,77 @@ chip northbridge/amd/amdk8/root_complex chip northbridge/amd/amdk8 device pci 18.0 on end device pci 18.0 on end - device pci 18.0 on # northbridge - # devices on link 0 + device pci 18.0 on # northbridge + # devices on link 0 chip southbridge/broadcom/bcm5780 # HT2000 - device pci 0.0 on end # PXB 1 0x0130 + device pci 0.0 on end # PXB 1 0x0130 device pci 1.0 on # PXB 2 0x0130 - device pci 4.0 on end # GB E 0x1668 vid = 0x14e4 - device pci 4.1 on end # GB E 0x1669 vid = 0x14e4 + device pci 4.0 on end # GB E 0x1668 vid = 0x14e4 + device pci 4.1 on end # GB E 0x1669 vid = 0x14e4 end - device pci 2.0 on end # PCI E 1 #0x0132 + device pci 2.0 on end # PCI E 1 #0x0132 device pci 3.0 on end # PCI E 2 device pci 4.0 on end # PCI E 3 device pci 5.0 on end # PCI E 4 end - chip southbridge/broadcom/bcm5785 # HT1000 - device pci 0.0 on # HT PXB 0x0036 - device pci d.0 on end # PPBX 0x0104 - device pci e.0 on end # SATA 0x024a - device pci e.1 on end # SATA 0x024a bx_a001 - device pci e.2 on end # SATA 0x024a bx_a001 - device pci e.3 on end # SATA 0x024a bx_a001 + chip southbridge/broadcom/bcm5785 # HT1000 + device pci 0.0 on # HT PXB 0x0036 + device pci d.0 on end # PPBX 0x0104 + device pci e.0 on end # SATA 0x024a + device pci e.1 on end # SATA 0x024a bx_a001 + device pci e.2 on end # SATA 0x024a bx_a001 + device pci e.3 on end # SATA 0x024a bx_a001 end - device pci 1.0 on # Legacy pci main 0x0205 + device pci 1.0 on # Legacy pci main 0x0205 end - device pci 1.1 on end # IDE 0x0214 - device pci 1.2 on # LPC 0x0234 + device pci 1.1 on end # IDE 0x0214 + device pci 1.2 on # LPC 0x0234 chip superio/nsc/pc87417 - device pnp 2e.0 off # Floppy + device pnp 2e.0 off # Floppy io 0x60 = 0x3f0 irq 0x70 = 6 drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port + device pnp 2e.1 off # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 end - device pnp 2e.2 off # Com 2 + device pnp 2e.2 off # Com 2 io 0x60 = 0x2f8 irq 0x70 = 3 end - device pnp 2e.3 on # Com 1 + device pnp 2e.3 on # Com 1 io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.4 off end # SWC - device pnp 2e.5 off end # Mouse - device pnp 2e.6 on # Keyboard + device pnp 2e.4 off end # SWC + device pnp 2e.5 off end # Mouse + device pnp 2e.6 on # Keyboard io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 end - device pnp 2e.7 off end # GPIO - device pnp 2e.f off end # XBUS - device pnp 2e.10 on #RTC + device pnp 2e.7 off end # GPIO + device pnp 2e.f off end # XBUS + device pnp 2e.10 on #RTC io 0x60 = 0x70 io 0x62 = 0x72 end end end - device pci 1.3 on end # WDTimer 0x0238 - device pci 1.4 on end # XIOAPIC0 0x0235 - device pci 1.5 on end # XIOAPIC1 - device pci 1.6 on end # XIOAPIC2 - device pci 2.0 on end # USB 0x0223 - device pci 2.1 on end # USB - device pci 2.2 on end # USB - device pci 3.0 on end # it is in bcm5785_0 bus + device pci 1.3 on end # WDTimer 0x0238 + device pci 1.4 on end # XIOAPIC0 0x0235 + device pci 1.5 on end # XIOAPIC1 + device pci 1.6 on end # XIOAPIC2 + device pci 2.0 on end # USB 0x0223 + device pci 2.1 on end # USB + device pci 2.2 on end # USB + device pci 3.0 on end # it is in bcm5785_0 bus end - end # device pci 18.0 + end # device pci 18.0 device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end # amdk8 end #domain end - - diff --git a/src/mainboard/msi/ms9652_fam10/devicetree.cb b/src/mainboard/msi/ms9652_fam10/devicetree.cb index a6d5206..b5947fe 100644 --- a/src/mainboard/msi/ms9652_fam10/devicetree.cb +++ b/src/mainboard/msi/ms9652_fam10/devicetree.cb @@ -22,148 +22,148 @@ ##
chip northbridge/amd/amdfam10/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F_1207 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x1462 0x9652 inherit - chip northbridge/amd/amdfam10 # Northbridge / RAM controller - device pci 18.0 on # Link 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627ehg # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.106 off # Serial flash interface (SFI) - io 0x60 = 0x100 - end - device pnp 2e.007 off # GPIO 1 - end - device pnp 2e.107 on # Game port - io 0x60 = 0x220 - end - device pnp 2e.207 on # MIDI - io 0x62 = 0x330 - irq 0x70 = 0xa - end - device pnp 2e.307 off # GPIO 6 - end - device pnp 2e.8 off # WDTO#, PLED - end - device pnp 2e.009 off # GPIO 2 - end - device pnp 2e.109 off # GPIO 3 - end - device pnp 2e.209 off # GPIO 4 - end - device pnp 2e.309 off # GPIO 5 - end - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 1-1-1 - device i2c 57 on end - end - end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - # chip drivers/generic/generic # MAC EEPROM - # device i2c 51 on end - # end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.0 on end # HT 1.0 - device pci 18.0 on end # HT 2.0 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - end - end + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_F_1207 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x1462 0x9652 inherit + chip northbridge/amd/amdfam10 # Northbridge / RAM controller + device pci 18.0 on # Link 0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627ehg # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard & mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.106 off # Serial flash interface (SFI) + io 0x60 = 0x100 + end + device pnp 2e.007 off # GPIO 1 + end + device pnp 2e.107 on # Game port + io 0x60 = 0x220 + end + device pnp 2e.207 on # MIDI + io 0x62 = 0x330 + irq 0x70 = 0xa + end + device pnp 2e.307 off # GPIO 6 + end + device pnp 2e.8 off # WDTO#, PLED + end + device pnp 2e.009 off # GPIO 2 + end + device pnp 2e.109 off # GPIO 3 + end + device pnp 2e.209 off # GPIO 4 + end + device pnp 2e.309 off # GPIO 5 + end + device pnp 2e.a off end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic # DIMM 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic # DIMM 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic # DIMM 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic # DIMM 1-1-1 + device i2c 57 on end + end + end + device pci 1.1 on # SM 1 + # PCI device SMBus address will + # depend on addon PCI device, do + # we need to scan_smbus_bus? + # chip drivers/generic/generic # PCIXA slot 1 + # device i2c 50 on end + # end + # chip drivers/generic/generic # PCIXB slot 1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # PCIXB slot 2 + # device i2c 52 on end + # end + # chip drivers/generic/generic # PCI slot 1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # Master MCP55 PCI-E + # device i2c 54 on end + # end + # chip drivers/generic/generic # Slave MCP55 PCI-E + # device i2c 55 on end + # end + # chip drivers/generic/generic # MAC EEPROM + # device i2c 51 on end + # end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.0 on end # HT 1.0 + device pci 18.0 on end # HT 2.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + end + end end diff --git a/src/mainboard/nec/powermate2000/devicetree.cb b/src/mainboard/nec/powermate2000/devicetree.cb index cd4aefe..9d13b51 100644 --- a/src/mainboard/nec/powermate2000/devicetree.cb +++ b/src/mainboard/nec/powermate2000/devicetree.cb @@ -1,54 +1,54 @@ -chip northbridge/intel/i82810 # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/socket_PGA370 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on - device pci 0.0 on end # Host bridge - device pci 1.0 off end # Onboard video - chip southbridge/intel/i82801ax # Southbridge - register "ide0_enable" = "1" - register "ide1_enable" = "1" +chip northbridge/intel/i82810 # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/socket_PGA370 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on + device pci 0.0 on end # Host bridge + device pci 1.0 off end # Onboard video + chip southbridge/intel/i82801ax # Southbridge + register "ide0_enable" = "1" + register "ide1_enable" = "1"
- device pci 1e.0 on end # PCI bridge - device pci 1f.0 on # ISA/LPC bridge - chip superio/smsc/smscsuperio # Super I/O (SMSC LPC47B27x) - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.4 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.5 off end # Com2 (N/A) - device pnp 2e.7 on # PS/2 keyboard - irq 0x70 = 1 - irq 0x72 = 0 - end - device pnp 2e.9 off end # Game port (N/A) - device pnp 2e.a on # Power-management events (PME) - io 0x60 = 0x800 - end - device pnp 2e.b on # MIDI port - io 0x60 = 0x330 - irq 0x70 = 5 - end - end - end - device pci 1f.1 on end # IDE - device pci 1f.2 on end # USB - device pci 1f.3 on end # SMBus - device pci 1f.5 on end # AC'97 audio - device pci 1f.6 off end # AC'97 modem (N/A) - end - end + device pci 1e.0 on end # PCI bridge + device pci 1f.0 on # ISA/LPC bridge + chip superio/smsc/smscsuperio # Super I/O (SMSC LPC47B27x) + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 off end # Com2 (N/A) + device pnp 2e.7 on # PS/2 keyboard + irq 0x70 = 1 + irq 0x72 = 0 + end + device pnp 2e.9 off end # Game port (N/A) + device pnp 2e.a on # Power-management events (PME) + io 0x60 = 0x800 + end + device pnp 2e.b on # MIDI port + io 0x60 = 0x330 + irq 0x70 = 5 + end + end + end + device pci 1f.1 on end # IDE + device pci 1f.2 on end # USB + device pci 1f.3 on end # SMBus + device pci 1f.5 on end # AC'97 audio + device pci 1f.6 off end # AC'97 modem (N/A) + end + end end
diff --git a/src/mainboard/newisys/khepri/devicetree.cb b/src/mainboard/newisys/khepri/devicetree.cb index bd00d28..d8aa650 100644 --- a/src/mainboard/newisys/khepri/devicetree.cb +++ b/src/mainboard/newisys/khepri/devicetree.cb @@ -8,8 +8,8 @@ chip northbridge/amd/amdk8/root_complex device domain 0 on subsystemid 0x17c2 0x0010 inherit chip northbridge/amd/amdk8 - device pci 18.0 on end # LDT 0 - device pci 18.0 on # LDT 1 + device pci 18.0 on end # LDT 0 + device pci 18.0 on # LDT 1 chip southbridge/amd/amd8131 device pci 0.0 on end device pci 0.1 on end @@ -25,44 +25,44 @@ chip northbridge/amd/amdk8/root_complex end device pci 1.0 on chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 irq 0x72 = 12 end - device pnp 2e.6 off # CIR + device pnp 2e.6 off # CIR io 0x60 = 0x100 end - device pnp 2e.7 off # GAME_MIDI_GIPO1 + device pnp 2e.7 off # GAME_MIDI_GIPO1 io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 irq 0x70 = 5 - end + end end end device pci 1.1 on end @@ -79,4 +79,3 @@ chip northbridge/amd/amdk8/root_complex end end end - diff --git a/src/mainboard/nvidia/l1_2pvv/devicetree.cb b/src/mainboard/nvidia/l1_2pvv/devicetree.cb index 5709db7..cefdd9c 100644 --- a/src/mainboard/nvidia/l1_2pvv/devicetree.cb +++ b/src/mainboard/nvidia/l1_2pvv/devicetree.cb @@ -1,180 +1,180 @@ chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x1022 0x2b80 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627ehg # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.106 off # Serial flash interface (SFI) - io 0x60 = 0x100 - end - device pnp 2e.007 off # GPIO 1 - end - device pnp 2e.107 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.207 off # MIDI - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.307 off # GPIO 6 - end - device pnp 2e.8 off # WDTO#, PLED - end - device pnp 2e.009 off # GPIO 2 - end - device pnp 2e.109 off # GPIO 3 - end - device pnp 2e.209 off # GPIO 4 - end - device pnp 2e.309 off # GPIO 5 - end - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 1-1-1 - device i2c 57 on end - end - end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on end # PCI - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on end # PCI E 5 - device pci b.0 off end # PCI E 4 - device pci c.0 off end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 off end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on # Link 2 == LDT 2 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on end # LPC - device pci 1.1 on end # SM 0 - device pci 2.0 off end # USB 1.1 - device pci 2.1 off end # USB 2 - device pci 4.0 off end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 off end # PCI - device pci 6.1 off end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on end # PCI E 5 - device pci b.0 off end # PCI E 4 - device pci c.0 off end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_F # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x1022 0x2b80 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627ehg # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard & mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.106 off # Serial flash interface (SFI) + io 0x60 = 0x100 + end + device pnp 2e.007 off # GPIO 1 + end + device pnp 2e.107 off # Game port + io 0x60 = 0x220 + end + device pnp 2e.207 off # MIDI + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.307 off # GPIO 6 + end + device pnp 2e.8 off # WDTO#, PLED + end + device pnp 2e.009 off # GPIO 2 + end + device pnp 2e.109 off # GPIO 3 + end + device pnp 2e.209 off # GPIO 4 + end + device pnp 2e.309 off # GPIO 5 + end + device pnp 2e.a off end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic # DIMM 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic # DIMM 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic # DIMM 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic # DIMM 1-1-1 + device i2c 57 on end + end + end + device pci 1.1 on # SM 1 + # PCI device SMBus address will + # depend on addon PCI device, do + # we need to scan_smbus_bus? + # chip drivers/generic/generic # PCIXA slot 1 + # device i2c 50 on end + # end + # chip drivers/generic/generic # PCIXB slot 1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # PCIXB slot 2 + # device i2c 52 on end + # end + # chip drivers/generic/generic # PCI slot 1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # Master MCP55 PCI-E + # device i2c 54 on end + # end + # chip drivers/generic/generic # Slave MCP55 PCI-E + # device i2c 55 on end + # end + chip drivers/generic/generic # MAC EEPROM + device i2c 51 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on end # PCI + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on end # PCI E 5 + device pci b.0 off end # PCI E 4 + device pci c.0 off end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 off end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.0 on end # Link 1 + device pci 18.0 on # Link 2 == LDT 2 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on end # LPC + device pci 1.1 on end # SM 0 + device pci 2.0 off end # USB 1.1 + device pci 2.1 off end # USB 2 + device pci 4.0 off end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 off end # PCI + device pci 6.1 off end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on end # PCI E 5 + device pci b.0 off end # PCI E 4 + device pci c.0 off end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end end diff --git a/src/mainboard/packardbell/ms2290/devicetree.cb b/src/mainboard/packardbell/ms2290/devicetree.cb index a57a2c1..0db1211 100644 --- a/src/mainboard/packardbell/ms2290/devicetree.cb +++ b/src/mainboard/packardbell/ms2290/devicetree.cb @@ -64,9 +64,9 @@ chip northbridge/intel/nehalem register "pirqh_routing" = "0x0b"
# GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) register "gpi7_routing" = "2" register "gpi8_routing" = "2"
diff --git a/src/mainboard/rca/rm4100/devicetree.cb b/src/mainboard/rca/rm4100/devicetree.cb index d39126c..2fff89f 100644 --- a/src/mainboard/rca/rm4100/devicetree.cb +++ b/src/mainboard/rca/rm4100/devicetree.cb @@ -1,68 +1,67 @@ -chip northbridge/intel/i82830 # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/socket_mFCBGA479 # Mobile Celeron Micro-FCBGA Socket 479 - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 2.0 on end # VGA (Intel 82830 CGC) - chip southbridge/intel/i82801dx # Southbridge - register "pirqa_routing" = "0x05" - register "pirqb_routing" = "0x06" - register "pirqc_routing" = "0x07" - register "pirqd_routing" = "0x09" - register "pirqe_routing" = "0x0a" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x0b" +chip northbridge/intel/i82830 # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/socket_mFCBGA479 # Mobile Celeron Micro-FCBGA Socket 479 + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 2.0 on end # VGA (Intel 82830 CGC) + chip southbridge/intel/i82801dx # Southbridge + register "pirqa_routing" = "0x05" + register "pirqb_routing" = "0x06" + register "pirqc_routing" = "0x07" + register "pirqd_routing" = "0x09" + register "pirqe_routing" = "0x0a" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x0b"
- register "ide0_enable" = "1" - register "ide1_enable" = "1" + register "ide0_enable" = "1" + register "ide1_enable" = "1"
- device pci 1d.0 on end # USB UHCI Controller #1 - device pci 1d.1 on end # USB UHCI Controller #2 - device pci 1d.2 on end # USB UHCI Controller #3 - device pci 1d.7 on end # USB2 EHCI Controller - device pci 1e.0 on end # PCI bridge - device pci 1f.0 on # ISA/LPC bridge - chip superio/smsc/smscsuperio # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 4 - end - device pnp 2e.4 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.5 on # Com2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.7 on # PS/2 keyboard/mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # Keyboard interrupt - irq 0x72 = 12 # Mouse interrupt - end - device pnp 2e.9 off end # Game port - device pnp 2e.a on # PME - io 0x60 = 0x800 - end - device pnp 2e.b off end # MPU-401 - end - end - device pci 1f.1 on end # IDE - device pci 1f.3 on end # SMBus - device pci 1f.5 on end # AC'97 audio - device pci 1f.6 on end # AC'97 modem - end - end + device pci 1d.0 on end # USB UHCI Controller #1 + device pci 1d.1 on end # USB UHCI Controller #2 + device pci 1d.2 on end # USB UHCI Controller #3 + device pci 1d.7 on end # USB2 EHCI Controller + device pci 1e.0 on end # PCI bridge + device pci 1f.0 on # ISA/LPC bridge + chip superio/smsc/smscsuperio # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 4 + end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 on # Com2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 on # PS/2 keyboard/mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # Keyboard interrupt + irq 0x72 = 12 # Mouse interrupt + end + device pnp 2e.9 off end # Game port + device pnp 2e.a on # PME + io 0x60 = 0x800 + end + device pnp 2e.b off end # MPU-401 + end + end + device pci 1f.1 on end # IDE + device pci 1f.3 on end # SMBus + device pci 1f.5 on end # AC'97 audio + device pci 1f.6 on end # AC'97 modem + end + end end - diff --git a/src/mainboard/soyo/sy-6ba-plus-iii/devicetree.cb b/src/mainboard/soyo/sy-6ba-plus-iii/devicetree.cb index c7c9ec3..e4f8fe9 100644 --- a/src/mainboard/soyo/sy-6ba-plus-iii/devicetree.cb +++ b/src/mainboard/soyo/sy-6ba-plus-iii/devicetree.cb @@ -19,55 +19,55 @@ ##
chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 7.0 on # ISA bridge - chip superio/ite/it8671f # Super I/O - device pnp 370.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 370.1 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 370.2 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 370.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 370.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 370.6 on # PS/2 mouse - irq 0x70 = 12 - end - end - end - device pci 7.1 on end # IDE - device pci 7.2 on end # USB - device pci 7.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" - end - end + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/ite/it8671f # Super I/O + device pnp 370.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 370.1 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 370.2 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 370.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 370.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 370.6 on # PS/2 mouse + irq 0x70 = 12 + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end end diff --git a/src/mainboard/supermicro/h8dme/devicetree.cb b/src/mainboard/supermicro/h8dme/devicetree.cb index 754e316..99995a3 100644 --- a/src/mainboard/supermicro/h8dme/devicetree.cb +++ b/src/mainboard/supermicro/h8dme/devicetree.cb @@ -1,126 +1,126 @@ chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x15d9 0x1511 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO, game port, MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO PLED - device pnp 2e.9 off end # GPIO SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/i2c/i2cmux2 - device i2c 48 off end - device i2c 49 off end - end - end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on # PCI - device pci 6.0 on end - end - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on # PCI E 5 - device pci 0.0 on end # NEC PCI-X - device pci 0.1 on # NEC PCI-X - device pci 4.0 on end # SCSI - device pci 4.1 on end # SCSI - end - end - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_F # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x15d9 0x1511 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO, game port, MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO PLED + device pnp 2e.9 off end # GPIO SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/i2c/i2cmux2 + device i2c 48 off end + device i2c 49 off end + end + end + device pci 1.1 on # SM 1 + # PCI device SMBus address will + # depend on addon PCI device, do + # we need to scan_smbus_bus? + # chip drivers/generic/generic # PCIXA slot 1 + # device i2c 50 on end + # end + # chip drivers/generic/generic # PCIXB slot 1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # PCIXB slot 2 + # device i2c 52 on end + # end + # chip drivers/generic/generic # PCI slot 1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # Master MCP55 PCI-E + # device i2c 54 on end + # end + # chip drivers/generic/generic # Slave MCP55 PCI-E + # device i2c 55 on end + # end + chip drivers/generic/generic # MAC EEPROM + device i2c 51 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on # PCI + device pci 6.0 on end + end + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on # PCI E 5 + device pci 0.0 on end # NEC PCI-X + device pci 0.1 on # NEC PCI-X + device pci 4.0 on end # SCSI + device pci 4.1 on end # SCSI + end + end + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end end diff --git a/src/mainboard/supermicro/h8dmr/devicetree.cb b/src/mainboard/supermicro/h8dmr/devicetree.cb index b363674..95e972b 100644 --- a/src/mainboard/supermicro/h8dmr/devicetree.cb +++ b/src/mainboard/supermicro/h8dmr/devicetree.cb @@ -1,146 +1,146 @@ chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x15d9 0x1511 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO, game port, MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO PLED - device pnp 2e.9 off end # GPIO SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 1-1-1 - device i2c 57 on end - end - end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on # PCI - device pci 6.0 on end - end - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on # PCI E 5 - device pci 0.0 on end # NEC PCI-X - device pci 0.1 on # NEC PCI-X - device pci 4.0 on end # SCSI - device pci 4.1 on end # SCSI - end - end - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_F # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x15d9 0x1511 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO, game port, MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO PLED + device pnp 2e.9 off end # GPIO SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic # DIMM 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic # DIMM 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic # DIMM 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic # DIMM 1-1-1 + device i2c 57 on end + end + end + device pci 1.1 on # SM 1 + # PCI device SMBus address will + # depend on addon PCI device, do + # we need to scan_smbus_bus? + # chip drivers/generic/generic # PCIXA slot 1 + # device i2c 50 on end + # end + # chip drivers/generic/generic # PCIXB slot 1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # PCIXB slot 2 + # device i2c 52 on end + # end + # chip drivers/generic/generic # PCI slot 1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # Master MCP55 PCI-E + # device i2c 54 on end + # end + # chip drivers/generic/generic # Slave MCP55 PCI-E + # device i2c 55 on end + # end + chip drivers/generic/generic # MAC EEPROM + device i2c 51 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on # PCI + device pci 6.0 on end + end + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on # PCI E 5 + device pci 0.0 on end # NEC PCI-X + device pci 0.1 on # NEC PCI-X + device pci 4.0 on end # SCSI + device pci 4.1 on end # SCSI + end + end + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end end diff --git a/src/mainboard/supermicro/h8dmr_fam10/devicetree.cb b/src/mainboard/supermicro/h8dmr_fam10/devicetree.cb index 9e52d07..eae3a2d 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/devicetree.cb +++ b/src/mainboard/supermicro/h8dmr_fam10/devicetree.cb @@ -1,152 +1,152 @@ chip northbridge/amd/amdfam10/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F_1207 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x15d9 0x1511 inherit - chip northbridge/amd/amdfam10 # Northbridge / RAM controller - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # SB on link 2.0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO, game port, MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO PLED - device pnp 2e.9 off end # GPIO SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 1-1-1 - device i2c 57 on end - end - end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on # PCI - device pci 6.0 on end - end - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on # PCI E 5 - device pci 0.0 on end # NEC PCI-X - device pci 0.1 on # NEC PCI-X - device pci 4.0 on end # SCSI - device pci 4.1 on end # SCSI - end - end - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 19.0 on end - device pci 19.1 on end - device pci 19.2 on end - device pci 19.3 on end - device pci 19.4 on end - end - end + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_F_1207 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x15d9 0x1511 inherit + chip northbridge/amd/amdfam10 # Northbridge / RAM controller + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on # SB on link 2.0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO, game port, MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO PLED + device pnp 2e.9 off end # GPIO SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic # DIMM 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic # DIMM 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic # DIMM 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic # DIMM 1-1-1 + device i2c 57 on end + end + end + device pci 1.1 on # SM 1 + # PCI device SMBus address will + # depend on addon PCI device, do + # we need to scan_smbus_bus? + # chip drivers/generic/generic # PCIXA slot 1 + # device i2c 50 on end + # end + # chip drivers/generic/generic # PCIXB slot 1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # PCIXB slot 2 + # device i2c 52 on end + # end + # chip drivers/generic/generic # PCI slot 1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # Master MCP55 PCI-E + # device i2c 54 on end + # end + # chip drivers/generic/generic # Slave MCP55 PCI-E + # device i2c 55 on end + # end + chip drivers/generic/generic # MAC EEPROM + device i2c 51 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on # PCI + device pci 6.0 on end + end + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on # PCI E 5 + device pci 0.0 on end # NEC PCI-X + device pci 0.1 on # NEC PCI-X + device pci 4.0 on end # SCSI + device pci 4.1 on end # SCSI + end + end + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 19.0 on end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + device pci 19.4 on end + end + end end diff --git a/src/mainboard/supermicro/h8qme_fam10/devicetree.cb b/src/mainboard/supermicro/h8qme_fam10/devicetree.cb index 6956b45..87d0c8d 100644 --- a/src/mainboard/supermicro/h8qme_fam10/devicetree.cb +++ b/src/mainboard/supermicro/h8qme_fam10/devicetree.cb @@ -1,115 +1,115 @@ chip northbridge/amd/amdfam10/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F_1207 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x15d9 0x1511 inherit - chip northbridge/amd/amdfam10 # Northbridge / RAM controller - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # SB on link 2 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO, game port, MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO PLED - device pnp 2e.9 off end # GPIO SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.1 off end # AZA - device pci 7.0 on - device pci 1.0 on end - end - device pci 8.0 off end - device pci 9.0 off end - device pci a.0 on end # PCI E 5 - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 19.0 on end - device pci 19.0 on end - device pci 19.0 on - chip southbridge/amd/amd8132 - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on - device pci 3.0 on end - device pci 3.1 on end - end - device pci 1.1 on end - end - end - device pci 19.1 on end - device pci 19.2 on end - device pci 19.3 on end - device pci 19.4 on end - end - end + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_F_1207 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x15d9 0x1511 inherit + chip northbridge/amd/amdfam10 # Northbridge / RAM controller + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on # SB on link 2 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO, game port, MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO PLED + device pnp 2e.9 off end # GPIO SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end + device pci 1.1 on # SM 1 + # PCI device SMBus address will + # depend on addon PCI device, do + # we need to scan_smbus_bus? + chip drivers/generic/generic # MAC EEPROM + device i2c 51 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.1 off end # AZA + device pci 7.0 on + device pci 1.0 on end + end + device pci 8.0 off end + device pci 9.0 off end + device pci a.0 on end # PCI E 5 + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 19.0 on end + device pci 19.0 on end + device pci 19.0 on + chip southbridge/amd/amd8132 + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on + device pci 3.0 on end + device pci 3.1 on end + end + device pci 1.1 on end + end + end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + device pci 19.4 on end + end + end end diff --git a/src/mainboard/supermicro/h8scm/devicetree.cb b/src/mainboard/supermicro/h8scm/devicetree.cb index a4e6c97..3cf338b 100644 --- a/src/mainboard/supermicro/h8scm/devicetree.cb +++ b/src/mainboard/supermicro/h8scm/devicetree.cb @@ -23,96 +23,96 @@ chip northbridge/amd/agesa/family15/root_complex end end device domain 0 on - subsystemid 0x15d9 0xab11 inherit #Supermicro - chip northbridge/amd/agesa/family15 # CPU side of HT root complex - device pci 18.0 on # Put IO-HUB at link_num 0, Instead of HT Link topology - chip northbridge/amd/cimx/rd890 # Southbridge PCI side of HT Root complex - device pci 0.0 on end # HT Root Complex 0x9600 - device pci 0.1 on end # CLKCONFIG - device pci 2.0 on end # GPP1 Port0 x16 SLOT4, 0x5A16 - device pci 3.0 on end # GPP1 Port1 - device pci 4.0 on end # GPP3a Port0 x4 SAS - device pci 5.0 off end # GPP3a Port1 - device pci 6.0 off end # GPP3a Port2 - device pci 7.0 off end # GPP3a Port3 - device pci 8.0 off end # NB/SB Link P2P bridge, should be hidden at boot time - device pci 9.0 on end # GPP3a Port4 x1 NC - device pci a.0 on end # GPP3a Port5 x1 NC - device pci b.0 off end # GPP2 Port0 (Not for sr5650) - device pci c.0 off end # GPP2 Port1 (Not for sr5650/sr5670) - device pci d.0 off end # GPP3b Port0 (Not for sr5650/sr5670) 0x5A1E, Intel 82576 - register "gpp1_configuration" = "1" # Configuration 16:0 default - #register "gpp2_configuration" = "0" # Configuration 8:8 - register "gpp3a_configuration" = "2" # 2 Configuration 4:1:1:0:0:0, 11 Configuration 1:1:1:1:1:1 + subsystemid 0x15d9 0xab11 inherit #Supermicro + chip northbridge/amd/agesa/family15 # CPU side of HT root complex + device pci 18.0 on # Put IO-HUB at link_num 0, Instead of HT Link topology + chip northbridge/amd/cimx/rd890 # Southbridge PCI side of HT Root complex + device pci 0.0 on end # HT Root Complex 0x9600 + device pci 0.1 on end # CLKCONFIG + device pci 2.0 on end # GPP1 Port0 x16 SLOT4, 0x5A16 + device pci 3.0 on end # GPP1 Port1 + device pci 4.0 on end # GPP3a Port0 x4 SAS + device pci 5.0 off end # GPP3a Port1 + device pci 6.0 off end # GPP3a Port2 + device pci 7.0 off end # GPP3a Port3 + device pci 8.0 off end # NB/SB Link P2P bridge, should be hidden at boot time + device pci 9.0 on end # GPP3a Port4 x1 NC + device pci a.0 on end # GPP3a Port5 x1 NC + device pci b.0 off end # GPP2 Port0 (Not for sr5650) + device pci c.0 off end # GPP2 Port1 (Not for sr5650/sr5670) + device pci d.0 off end # GPP3b Port0 (Not for sr5650/sr5670) 0x5A1E, Intel 82576 + register "gpp1_configuration" = "1" # Configuration 16:0 default + #register "gpp2_configuration" = "0" # Configuration 8:8 + register "gpp3a_configuration" = "2" # 2 Configuration 4:1:1:0:0:0, 11 Configuration 1:1:1:1:1:1 register "port_enable" = "0x61f" end #northbridge/amd/cimx/rd890 chip southbridge/amd/cimx/sb700 # it is under NB/SB Link, but on the same pci bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB1 - device pci 12.1 on end # USB1 - device pci 12.2 on end # USB1 - device pci 13.0 on end # USB2 - device pci 13.1 on end # USB2 - device pci 13.2 on end # USB2 - device pci 14.0 on end # SM - device pci 14.1 off end # IDE 0x439c - device pci 14.2 off end # HDA 0x4383, h8scm not have codec. - device pci 14.3 on # LPC 0x439d + device pci 11.0 on end # SATA + device pci 12.0 on end # USB1 + device pci 12.1 on end # USB1 + device pci 12.2 on end # USB1 + device pci 13.0 on end # USB2 + device pci 13.1 on end # USB2 + device pci 13.2 on end # USB2 + device pci 14.0 on end # SM + device pci 14.1 off end # IDE 0x439c + device pci 14.2 off end # HDA 0x4383, h8scm not have codec. + device pci 14.3 on # LPC 0x439d chip superio/winbond/w83627dhg - device pnp 2e.0 off # Floppy + device pnp 2e.0 off # Floppy io 0x60 = 0x3f0 irq 0x70 = 6 drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port + device pnp 2e.1 off # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 end - device pnp 2e.2 on # Com1 + device pnp 2e.2 on # Com1 io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.3 on # Com2 + device pnp 2e.3 on # Com2 io 0x60 = 0x2f8 irq 0x70 = 3 end ## though UARTs are on the NUVOTON BMC, superio only used to support PS2 KB/MS## - device pnp 2e.5 on # PS/2 keyboard & mouse + device pnp 2e.5 on # PS/2 keyboard & mouse io 0x60 = 0x60 io 0x62 = 0x64 - irq 0x70 = 0x01 #keyboard - irq 0x72 = 0x0C #mouse + irq 0x70 = 0x01 # keyboard + irq 0x72 = 0x0C # mouse end - device pnp 2e.6 off # SPI + device pnp 2e.6 off # SPI end - device pnp 2e.307 off # GPIO6 + device pnp 2e.307 off # GPIO6 end - device pnp 2e.8 off # WDTO#, PLED + device pnp 2e.8 off # WDTO#, PLED end - device pnp 2e.009 off # GPIO2 + device pnp 2e.009 off # GPIO2 end - device pnp 2e.109 off # GPIO3 + device pnp 2e.109 off # GPIO3 end - device pnp 2e.209 off # GPIO4 + device pnp 2e.209 off # GPIO4 end - device pnp 2e.309 off # GPIO5 + device pnp 2e.309 off # GPIO5 end - device pnp 2e.a off # ACPI + device pnp 2e.a off # ACPI end - device pnp 2e.b off # HWM + device pnp 2e.b off # HWM io 0x60 = 0x290 end - device pnp 2e.c off # PECI, SST + device pnp 2e.c off # PECI, SST end end #superio/winbond/w83627dhg chip drivers/i2c/w83795 - device pnp 5e on #hwm + device pnp 5e on #hwm end end #drivers/i2c/w83795 end # LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # USB 3 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # USB 3 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE end # southbridge/amd/cimx/sb700 end # device pci 18.0
@@ -130,4 +130,3 @@ chip northbridge/amd/agesa/family15/root_complex end #chip northbridge/amd/agesa/family15 # CPU side of HT root complex end #domain end #northbridge/amd/agesa/family15/root_complex - diff --git a/src/mainboard/supermicro/x6dhe_g/devicetree.cb b/src/mainboard/supermicro/x6dhe_g/devicetree.cb index 322860b..0b79d60 100644 --- a/src/mainboard/supermicro/x6dhe_g/devicetree.cb +++ b/src/mainboard/supermicro/x6dhe_g/devicetree.cb @@ -1,4 +1,4 @@ -chip northbridge/intel/e7520 # MCH +chip northbridge/intel/e7520 # MCH device domain 0 on subsystemid 0x15d9 0x6080 inherit chip southbridge/intel/esb6300 # ESB6300 @@ -8,7 +8,7 @@ chip northbridge/intel/e7520 # MCH device pci 1c.0 on chip drivers/generic/generic device pci 01.0 on end # onboard gige1 - device pci 02.0 on end # onboard gige2 + device pci 02.0 on end # onboard gige2 end end
@@ -27,7 +27,7 @@ chip northbridge/intel/e7520 # MCH end
- device pci 1f.0 on # ISA bridge + device pci 1f.0 on # ISA bridge chip superio/winbond/w83627hf device pnp 2e.0 off end device pnp 2e.2 on @@ -55,26 +55,26 @@ chip northbridge/intel/e7520 # MCH end
device pci 00.0 on end # Northbridge - device pci 00.1 on end # Northbridge Error reporting + device pci 00.1 on end # Northbridge Error reporting device pci 01.0 on end device pci 02.0 on chip southbridge/intel/pxhd # PXHD 6700 - device pci 00.0 on end # bridge - device pci 00.1 on end # I/O apic - device pci 00.2 on end # bridge - device pci 00.3 on end # I/O apic + device pci 00.0 on end # bridge + device pci 00.1 on end # I/O apic + device pci 00.2 on end # bridge + device pci 00.3 on end # I/O apic end end -# device register "intrline" = "0x00070105" - device pci 04.0 on end - device pci 06.0 on end +# device register "intrline" = "0x00070105" + device pci 04.0 on end + device pci 06.0 on end end
device cpu_cluster 0 on - chip cpu/intel/socket_mPGA604 # CPU 0 + chip cpu/intel/socket_mPGA604 # CPU 0 device lapic 0 on end end - chip cpu/intel/socket_mPGA604 # CPU 1 + chip cpu/intel/socket_mPGA604 # CPU 1 device lapic 6 on end end end diff --git a/src/mainboard/supermicro/x6dhe_g2/devicetree.cb b/src/mainboard/supermicro/x6dhe_g2/devicetree.cb index 984814e..9968c86 100644 --- a/src/mainboard/supermicro/x6dhe_g2/devicetree.cb +++ b/src/mainboard/supermicro/x6dhe_g2/devicetree.cb @@ -1,4 +1,4 @@ -chip northbridge/intel/e7520 # MCH +chip northbridge/intel/e7520 # MCH device domain 0 on subsystemid 0x15d9 0x6080 inherit chip southbridge/intel/i82801ex # ICH5R @@ -8,7 +8,7 @@ chip northbridge/intel/e7520 # MCH device pci 1c.0 on chip drivers/generic/generic device pci 01.0 on end # onboard gige1 - device pci 02.0 on end # onboard gige2 + device pci 02.0 on end # onboard gige2 end end
@@ -27,7 +27,7 @@ chip northbridge/intel/e7520 # MCH end
- device pci 1f.0 on # ISA bridge + device pci 1f.0 on # ISA bridge chip superio/nsc/pc87427 device pnp 2e.0 off end device pnp 2e.2 on @@ -55,26 +55,26 @@ chip northbridge/intel/e7520 # MCH end
device pci 00.0 on end # Northbridge - device pci 00.1 on end # Northbridge Error reporting + device pci 00.1 on end # Northbridge Error reporting device pci 01.0 on end device pci 02.0 on chip southbridge/intel/pxhd # PXHD 6700 - device pci 00.0 on end # bridge - device pci 00.1 on end # I/O apic - device pci 00.2 on end # bridge - device pci 00.3 on end # I/O apic + device pci 00.0 on end # bridge + device pci 00.1 on end # I/O apic + device pci 00.2 on end # bridge + device pci 00.3 on end # I/O apic end end -# device register "intrline" = "0x00070105" - device pci 04.0 on end - device pci 06.0 on end +# device register "intrline" = "0x00070105" + device pci 04.0 on end + device pci 06.0 on end end
device cpu_cluster 0 on - chip cpu/intel/socket_mPGA604 # CPU 0 + chip cpu/intel/socket_mPGA604 # CPU 0 device lapic 0 on end end - chip cpu/intel/socket_mPGA604 # CPU 1 + chip cpu/intel/socket_mPGA604 # CPU 1 device lapic 6 on end end end diff --git a/src/mainboard/supermicro/x6dhr_ig/devicetree.cb b/src/mainboard/supermicro/x6dhr_ig/devicetree.cb index 3a037fb..becaa2f 100644 --- a/src/mainboard/supermicro/x6dhr_ig/devicetree.cb +++ b/src/mainboard/supermicro/x6dhr_ig/devicetree.cb @@ -29,7 +29,7 @@ chip northbridge/intel/e7520 # mch device pnp 2e.6 off end device pnp 2e.7 off end device pnp 2e.9 off end - device pnp 2e.a on end + device pnp 2e.a on end device pnp 2e.b off end end end @@ -41,7 +41,7 @@ chip northbridge/intel/e7520 # mch register "pirq_e_h" = "0x0a808080" end device pci 00.0 on end - device pci 00.1 on end + device pci 00.1 on end device pci 01.0 on end device pci 02.0 on end device pci 03.0 on @@ -52,9 +52,9 @@ chip northbridge/intel/e7520 # mch device pci 0.2 on # On board gig e1000 chip drivers/generic/generic - device pci 02.0 on end - device pci 02.1 on end - end + device pci 02.0 on end + device pci 02.1 on end + end end device pci 0.3 on end end @@ -63,7 +63,7 @@ chip northbridge/intel/e7520 # mch chip southbridge/intel/pxhd # pxhd2 # Bus bridges and ioapics usually bus 5 device pci 0.0 on end - # Slot 6 is usually 6:2.0 + # Slot 6 is usually 6:2.0 device pci 0.1 on end device pci 0.2 on end # Slot 7 is usually 7:2.0 @@ -82,4 +82,3 @@ chip northbridge/intel/e7520 # mch end register "intrline" = "0x00070105" end - diff --git a/src/mainboard/supermicro/x6dhr_ig2/devicetree.cb b/src/mainboard/supermicro/x6dhr_ig2/devicetree.cb index ca8650b..1e230fb 100644 --- a/src/mainboard/supermicro/x6dhr_ig2/devicetree.cb +++ b/src/mainboard/supermicro/x6dhr_ig2/devicetree.cb @@ -29,7 +29,7 @@ chip northbridge/intel/e7520 # mch device pnp 2e.6 off end device pnp 2e.7 off end device pnp 2e.9 off end - device pnp 2e.a on end + device pnp 2e.a on end device pnp 2e.b off end end end @@ -51,9 +51,9 @@ chip northbridge/intel/e7520 # mch device pci 0.0 on # On board gig e1000 chip drivers/generic/generic - device pci 03.0 on end - device pci 03.1 on end - end + device pci 03.0 on end + device pci 03.1 on end + end end device pci 0.1 on end device pci 0.2 on end @@ -73,4 +73,3 @@ chip northbridge/intel/e7520 # mch end register "intrline" = "0x00070105" end - diff --git a/src/mainboard/tyan/s1846/devicetree.cb b/src/mainboard/tyan/s1846/devicetree.cb index f774d4f..74d496f 100644 --- a/src/mainboard/tyan/s1846/devicetree.cb +++ b/src/mainboard/tyan/s1846/devicetree.cb @@ -1,55 +1,55 @@ chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 7.0 on # ISA bridge - chip superio/nsc/pc87309 # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.4 on # Power management - end - device pnp 2e.5 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.6 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - end - end - device pci 7.1 on end # IDE - device pci 7.2 on end # USB - device pci 7.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" - end - end + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/nsc/pc87309 # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 on # Power management + end + device pnp 2e.5 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.6 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end end diff --git a/src/mainboard/tyan/s2850/devicetree.cb b/src/mainboard/tyan/s2850/devicetree.cb index 85c6384..af9e959 100644 --- a/src/mainboard/tyan/s2850/devicetree.cb +++ b/src/mainboard/tyan/s2850/devicetree.cb @@ -1,14 +1,14 @@ chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_940 - device lapic 0 on end - end - end + device cpu_cluster 0 on + chip cpu/amd/socket_940 + device lapic 0 on end + end + end device domain 0 on subsystemid 0x10f1 0x2850 inherit chip northbridge/amd/amdk8 device pci 18.0 on # LDT0 - # devices on link 2, link 2 == LDT 2 + # devices on link 2, link 2 == LDT 2 chip southbridge/amd/amd8111 # this "device pci 0.0" is the parent the next one # PCI bridge @@ -17,80 +17,78 @@ chip northbridge/amd/amdk8/root_complex device pci 0.1 on end device pci 0.2 off end device pci 1.0 off end - #chip drivers/ati/ragexl - device pci b.0 on end + #chip drivers/ati/ragexl + device pci b.0 on end end device pci 1.0 on chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 irq 0x72 = 12 end - device pnp 2e.6 off # CIR - io 0x60 = 0x100 - end - device pnp 2e.7 off # GAME_MIDI_GIPO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end end end device pci 1.1 on end device pci 1.2 on end device pci 1.3 on - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end end device pci 1.5 on end device pci 1.6 off end - register "ide0_enable" = "1" - register "ide1_enable" = "1" + register "ide0_enable" = "1" + register "ide1_enable" = "1" end - end # device pci 18.0 - device pci 18.0 on end - device pci 18.0 on end - + end # device pci 18.0 + device pci 18.0 on end + device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end end end - diff --git a/src/mainboard/tyan/s2875/devicetree.cb b/src/mainboard/tyan/s2875/devicetree.cb index 39eb8b2..16c028f 100644 --- a/src/mainboard/tyan/s2875/devicetree.cb +++ b/src/mainboard/tyan/s2875/devicetree.cb @@ -1,14 +1,14 @@ chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_940 - device lapic 0 on end - end - end + device cpu_cluster 0 on + chip cpu/amd/socket_940 + device lapic 0 on end + end + end device domain 0 on subsystemid 0x10f1 0x2875 inherit chip northbridge/amd/amdk8 - device pci 18.0 on # northbridge - # devices on link 0, link 0 == LDT 0 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 chip southbridge/amd/amd8151 # the on/off keyword is mandatory device pci 0.0 on end @@ -22,45 +22,45 @@ chip northbridge/amd/amdk8/root_complex device pci 0.1 on end device pci 0.2 off end device pci 1.0 off end - device pci 5.0 on end + device pci 5.0 on end end device pci 1.0 on chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy + device pnp 2e.0 on # Floppy io 0x60 = 0x3f0 irq 0x70 = 6 drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port + device pnp 2e.1 off # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 end - device pnp 2e.2 on # Com1 + device pnp 2e.2 on # Com1 io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.3 off # Com2 + device pnp 2e.3 off # Com2 io 0x60 = 0x2f8 irq 0x70 = 3 end - device pnp 2e.5 on # Keyboard + device pnp 2e.5 on # Keyboard io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 irq 0x72 = 12 end - device pnp 2e.6 off # CIR + device pnp 2e.6 off # CIR io 0x60 = 0x100 end - device pnp 2e.7 off # GAME_MIDI_GIPO1 + device pnp 2e.7 off # GAME_MIDI_GIPO1 io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor io 0x60 = 0x290 irq 0x70 = 5 end @@ -71,18 +71,15 @@ chip northbridge/amd/amdk8/root_complex device pci 1.3 on end device pci 1.5 on end device pci 1.6 off end - register "ide0_enable" = "1" - register "ide1_enable" = "1" + register "ide0_enable" = "1" + register "ide1_enable" = "1" end - end # device pci 18.0 - + end # device pci 18.0 device pci 18.0 on end device pci 18.0 on end - device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end end end - diff --git a/src/mainboard/tyan/s2880/devicetree.cb b/src/mainboard/tyan/s2880/devicetree.cb index f9f4856..2cf649a 100644 --- a/src/mainboard/tyan/s2880/devicetree.cb +++ b/src/mainboard/tyan/s2880/devicetree.cb @@ -1,24 +1,24 @@ chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_940 - device lapic 0 on end - end - end + device cpu_cluster 0 on + chip cpu/amd/socket_940 + device lapic 0 on end + end + end device domain 0 on subsystemid 0x10f1 0x2880 inherit chip northbridge/amd/amdk8 - device pci 18.0 on # northbridge - # devices on link 0, link 0 == LDT 0 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 chip southbridge/amd/amd8131 # the on/off keyword is mandatory device pci 0.0 on - device pci 9.0 on end #broadcom + device pci 9.0 on end #broadcom device pci 9.1 on end -# chip drivers/lsi/53c1030 -# device pci a.0 on end -# device pci a.1 on end -# register "fw_address" = "0xfff8c000" -# end +# chip drivers/lsi/53c1030 +# device pci a.0 on end +# device pci a.1 on end +# register "fw_address" = "0xfff8c000" +# end end device pci 0.1 on end device pci 1.0 on end @@ -32,49 +32,49 @@ chip northbridge/amd/amdk8/root_complex device pci 0.1 on end device pci 0.2 off end device pci 1.0 off end - device pci 5.0 on end #some sata - device pci 6.0 on end #adti + device pci 5.0 on end #some sata + device pci 6.0 on end #adti end device pci 1.0 on chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 irq 0x72 = 12 end - device pnp 2e.6 off # CIR - io 0x60 = 0x100 - end - device pnp 2e.7 off # GAME_MIDI_GIPO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end end end device pci 1.1 on end @@ -82,18 +82,16 @@ chip northbridge/amd/amdk8/root_complex device pci 1.3 on end device pci 1.5 off end device pci 1.6 off end - register "ide0_enable" = "1" - register "ide1_enable" = "1" + register "ide0_enable" = "1" + register "ide1_enable" = "1" end - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end + end # device pci 18.0
+ device pci 18.0 on end + device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end end end - diff --git a/src/mainboard/tyan/s2881/devicetree.cb b/src/mainboard/tyan/s2881/devicetree.cb index aab75a3..46ee680 100644 --- a/src/mainboard/tyan/s2881/devicetree.cb +++ b/src/mainboard/tyan/s2881/devicetree.cb @@ -1,130 +1,129 @@ chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_940 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x10f1 0x2881 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on end # link 0 - device pci 18.0 on end # link 1 - device pci 18.0 on # link 2 - chip southbridge/amd/amd8131 - # the on/off keyword is mandatory - device pci 0.0 on - device pci 9.0 on end # Broadcom 5704 - device pci 9.1 on end - device pci a.0 on end # Adaptic - device pci a.1 on end - end - device pci 0.1 on end - device pci 1.0 on end - device pci 1.1 on end - end - chip southbridge/amd/amd8111 - # this "device pci 0.0" is the parent the next one - # PCI bridge - device pci 0.0 on - device pci 0.0 on end - device pci 0.1 on end - device pci 0.2 off end - device pci 1.0 off end - device pci 5.0 on end # SiI - device pci 6.0 on end - end - device pci 1.0 on - chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # CIR - io 0x60 = 0x100 - end - device pnp 2e.7 off # GAME_MIDI_GIPO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on end - device pci 1.2 on end - device pci 1.3 on - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic #dimm 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic #dimm 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic #dimm 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic #dimm 1-1-1 - device i2c 57 on end - end - chip drivers/i2c/adt7463 # CPU0/1 temp, CPU1 vid, SYS FAN 1/2/3 - device i2c 2d on end - end - chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 4,CPU0 vid, CPU0/1 FAN - device i2c 2a on end - end - chip drivers/generic/generic # Winbond HWM 0x92 - device i2c 49 on end - end - chip drivers/generic/generic # Winbond HWM 0x94 - device i2c 4a on end - end - end # acpi - device pci 1.5 off end - device pci 1.6 off end - register "ide0_enable" = "1" - register "ide1_enable" = "1" - end - end # device pci 18.0 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end + device cpu_cluster 0 on + chip cpu/amd/socket_940 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x10f1 0x2881 inherit + chip northbridge/amd/amdk8 + device pci 18.0 on end # link 0 + device pci 18.0 on end # link 1 + device pci 18.0 on # link 2 + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on + device pci 9.0 on end # Broadcom 5704 + device pci 9.1 on end + device pci a.0 on end # Adaptic + device pci a.1 on end + end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 off end + device pci 1.0 off end + device pci 5.0 on end # SiI + device pci 6.0 on end + end + device pci 1.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + chip drivers/i2c/adt7463 # CPU0/1 temp, CPU1 vid, SYS FAN 1/2/3 + device i2c 2d on end + end + chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 4,CPU0 vid, CPU0/1 FAN + device i2c 2a on end + end + chip drivers/generic/generic # Winbond HWM 0x92 + device i2c 49 on end + end + chip drivers/generic/generic # Winbond HWM 0x94 + device i2c 4a on end + end + end # acpi + device pci 1.5 off end + device pci 1.6 off end + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end end - diff --git a/src/mainboard/tyan/s2882/devicetree.cb b/src/mainboard/tyan/s2882/devicetree.cb index 4074695..b557c2b 100644 --- a/src/mainboard/tyan/s2882/devicetree.cb +++ b/src/mainboard/tyan/s2882/devicetree.cb @@ -1,22 +1,22 @@ chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_940 - device lapic 0 on end - end - end + device cpu_cluster 0 on + chip cpu/amd/socket_940 + device lapic 0 on end + end + end
device domain 0 on subsystemid 0x10f1 0x2882 inherit chip northbridge/amd/amdk8 - device pci 18.0 on # northbridge - # devices on link 0, link 0 == LDT 0 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 chip southbridge/amd/amd8131 # the on/off keyword is mandatory device pci 0.0 on - device pci 6.0 on end # adaptec - device pci 6.1 on end - device pci 9.0 on end # broadcom 5704 - device pci 9.1 on end + device pci 6.0 on end # adaptec + device pci 6.1 on end + device pci 9.0 on end # broadcom 5704 + device pci 9.1 on end end device pci 0.1 on end device pci 1.0 on end @@ -30,97 +30,94 @@ chip northbridge/amd/amdk8/root_complex device pci 0.1 on end device pci 0.2 off end device pci 1.0 off end - device pci 5.0 on end - # chip drivers/ati/ragexl - device pci 6.0 on end - # end - device pci 8.0 on end #intel 10/100 + device pci 5.0 on end + # chip drivers/ati/ragexl + device pci 6.0 on end + # end + device pci 8.0 on end #intel 10/100 end device pci 1.0 on chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 irq 0x72 = 12 end - device pnp 2e.6 off # CIR - io 0x60 = 0x100 - end - device pnp 2e.7 off # GAME_MIDI_GIPO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end end end device pci 1.1 on end device pci 1.2 on end device pci 1.3 on end device pci 1.3 on -# chip drivers/generic/generic #dimm 0-0-0 -# device i2c 50 on end -# end -# chip drivers/generic/generic #dimm 0-0-1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #dimm 0-1-0 -# device i2c 52 on end -# end -# chip drivers/generic/generic #dimm 0-1-1 -# device i2c 53 on end -# end -# chip drivers/generic/generic #dimm 1-0-0 -# device i2c 54 on end -# end -# chip drivers/generic/generic #dimm 1-0-1 -# device i2c 55 on end -# end -# chip drivers/generic/generic #dimm 1-1-0 -# device i2c 56 on end -# end -# chip drivers/generic/generic #dimm 1-1-1 -# device i2c 57 on end -# end - end # acpi +# chip drivers/generic/generic #dimm 0-0-0 +# device i2c 50 on end +# end +# chip drivers/generic/generic #dimm 0-0-1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #dimm 0-1-0 +# device i2c 52 on end +# end +# chip drivers/generic/generic #dimm 0-1-1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #dimm 1-0-0 +# device i2c 54 on end +# end +# chip drivers/generic/generic #dimm 1-0-1 +# device i2c 55 on end +# end +# chip drivers/generic/generic #dimm 1-1-0 +# device i2c 56 on end +# end +# chip drivers/generic/generic #dimm 1-1-1 +# device i2c 57 on end +# end + end # acpi device pci 1.5 off end device pci 1.6 off end register "ide0_enable" = "1" register "ide1_enable" = "1" end - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - + end # device pci 18.0 + device pci 18.0 on end + device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end # NB end #domain end - diff --git a/src/mainboard/tyan/s2885/devicetree.cb b/src/mainboard/tyan/s2885/devicetree.cb index 7191e52..d57f981 100644 --- a/src/mainboard/tyan/s2885/devicetree.cb +++ b/src/mainboard/tyan/s2885/devicetree.cb @@ -1,9 +1,9 @@ chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_940 - device lapic 0 on end - end - end + device cpu_cluster 0 on + chip cpu/amd/socket_940 + device lapic 0 on end + end + end device domain 0 on subsystemid 0x10f1 0x2885 inherit chip northbridge/amd/amdk8 @@ -14,13 +14,13 @@ chip northbridge/amd/amdk8/root_complex device pci 1.0 on end end end - device pci 18.0 on end # LDT1 - device pci 18.0 on # northbridge - # devices on link 2, link 2 == LDT 2 + device pci 18.0 on end # LDT1 + device pci 18.0 on # northbridge + # devices on link 2, link 2 == LDT 2 chip southbridge/amd/amd8131 # the on/off keyword is mandatory device pci 0.0 on - device pci 9.0 on end # broadcom 5703 + device pci 9.0 on end # broadcom 5703 end device pci 0.1 on end device pci 1.0 on end @@ -34,90 +34,87 @@ chip northbridge/amd/amdk8/root_complex device pci 0.1 on end device pci 0.2 off end device pci 1.0 off end - device pci b.0 on end # SiI 3114 + device pci b.0 on end # SiI 3114 end device pci 1.0 on chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 irq 0x72 = 12 end - device pnp 2e.6 off # CIR + device pnp 2e.6 off # CIR io 0x60 = 0x100 end - device pnp 2e.7 off # GAME_MIDI_GIPO1 + device pnp 2e.7 off # GAME_MIDI_GIPO1 io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 irq 0x70 = 5 - end + end end end device pci 1.1 on end device pci 1.2 on end device pci 1.3 on - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic #dimm 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic #dimm 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic #dimm 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic #dimm 1-1-1 - device i2c 57 on end - end + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end end # acpi device pci 1.5 on end device pci 1.6 off end - register "ide0_enable" = "1" - register "ide1_enable" = "1" + register "ide0_enable" = "1" + register "ide1_enable" = "1" end - end # device pci 18.0 - + end # device pci 18.0 device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end - end #domain end - diff --git a/src/mainboard/tyan/s2891/devicetree.cb b/src/mainboard/tyan/s2891/devicetree.cb index 8442ec8..b25c08c 100644 --- a/src/mainboard/tyan/s2891/devicetree.cb +++ b/src/mainboard/tyan/s2891/devicetree.cb @@ -1,137 +1,137 @@ chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_940 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x10f1 0x2891 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/ck804 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # Consumer IR - io 0x60 = 0x100 - end - device pnp 2e.7 off # Game port, MIDI, GPIO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b off # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - # chip drivers/generic/generic # DIMM 0-0-0 - # device i2c 50 on end - # end - # chip drivers/generic/generic # DIMM 0-0-1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # DIMM 0-1-0 - # device i2c 52 on end - # end - # chip drivers/generic/generic # DIMM 0-1-1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # DIMM 1-0-0 - # device i2c 54 on end - # end - # chip drivers/generic/generic # DIMM 1-0-1 - # device i2c 55 on end - # end - # chip drivers/generic/generic # DIMM 1-1-0 - # device i2c 56 on end - # end - # chip drivers/generic/generic # DIMM 1-1-1 - # device i2c 57 on end - # end - end - # device pci 1.1 on # SM 1 - # chip drivers/i2c/adm1027 # ADT7463A CPU0 temp, SYS FAN 2/3/4 - # device i2c 2d on end - # end - # chip drivers/i2c/adm1027 # ADT7463A CPU1 temp, CPU0/1 FAN , SYS FAN 1/5 - # device i2c 2e on end - # end - # chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 6/7, SB FAN - # device i2c 2a on end - # end - # chip drivers/generic/generic # Winbond HWM 0x92 - # device i2c 49 on end - # end - # chip drivers/generic/generic # Winbond HWM 0x94 - # device i2c 4a on end - # end - # end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 off end # ACI - device pci 4.1 off end # MCI - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 1 - device pci 8.0 on end # SATA 0 - device pci 9.0 on # PCI - # chip drivers/ati/ragexl - device pci 7.0 on end - end - device pci a.0 off end # NIC - device pci b.0 off end # PCI E 3 - device pci c.0 off end # PCI E 2 - device pci d.0 on end # PCI E 1 - device pci e.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on # Link 2 == LDT 2 - chip southbridge/amd/amd8131 # Southbridge - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on - device pci 9.0 on end - device pci 9.1 on end - end - device pci 1.1 on end - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_940 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x10f1 0x2891 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/ck804 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard & mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # Consumer IR + io 0x60 = 0x100 + end + device pnp 2e.7 off # Game port, MIDI, GPIO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b off # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + # chip drivers/generic/generic # DIMM 0-0-0 + # device i2c 50 on end + # end + # chip drivers/generic/generic # DIMM 0-0-1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # DIMM 0-1-0 + # device i2c 52 on end + # end + # chip drivers/generic/generic # DIMM 0-1-1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # DIMM 1-0-0 + # device i2c 54 on end + # end + # chip drivers/generic/generic # DIMM 1-0-1 + # device i2c 55 on end + # end + # chip drivers/generic/generic # DIMM 1-1-0 + # device i2c 56 on end + # end + # chip drivers/generic/generic # DIMM 1-1-1 + # device i2c 57 on end + # end + end + # device pci 1.1 on # SM 1 + # chip drivers/i2c/adm1027 # ADT7463A CPU0 temp, SYS FAN 2/3/4 + # device i2c 2d on end + # end + # chip drivers/i2c/adm1027 # ADT7463A CPU1 temp, CPU0/1 FAN , SYS FAN 1/5 + # device i2c 2e on end + # end + # chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 6/7, SB FAN + # device i2c 2a on end + # end + # chip drivers/generic/generic # Winbond HWM 0x92 + # device i2c 49 on end + # end + # chip drivers/generic/generic # Winbond HWM 0x94 + # device i2c 4a on end + # end + # end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 off end # ACI + device pci 4.1 off end # MCI + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on # PCI + # chip drivers/ati/ragexl + device pci 7.0 on end + end + device pci a.0 off end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 on end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + end + end + device pci 18.0 on end # Link 1 + device pci 18.0 on # Link 2 == LDT 2 + chip southbridge/amd/amd8131 # Southbridge + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on + device pci 9.0 on end + device pci 9.1 on end + end + device pci 1.1 on end + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end end diff --git a/src/mainboard/tyan/s2892/devicetree.cb b/src/mainboard/tyan/s2892/devicetree.cb index 3edc156..3fc7e97 100644 --- a/src/mainboard/tyan/s2892/devicetree.cb +++ b/src/mainboard/tyan/s2892/devicetree.cb @@ -1,140 +1,140 @@ chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_940 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x10f1 0x2892 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/ck804 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # Consumer IR - io 0x60 = 0x100 - end - device pnp 2e.7 off # Game port, MIDI, GPIO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 1-1-1 - device i2c 57 on end - end - end - device pci 1.1 on # SM 1 - chip drivers/i2c/adm1027 # ADT7463A CPU0 temp, SYS FAN 2/3/4 - device i2c 2d on end - end - chip drivers/i2c/adm1027 # ADT7463A CPU1 temp, CPU0/1 FAN , SYS FAN 1/5 - device i2c 2e on end - end - chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 6/7, SB FAN - device i2c 2a on end - end - chip drivers/generic/generic # Winbond HWM 0x92 - device i2c 49 on end - end - chip drivers/generic/generic # Winbond HWM 0x94 - device i2c 4a on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 off end # ACI - device pci 4.1 off end # MCI - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 1 - device pci 8.0 on end # SATA 0 - device pci 9.0 on # PCI - # chip drivers/ati/ragexl - device pci 6.0 on end - # end - device pci 8.0 on end - end - device pci a.0 off end # NIC - device pci b.0 off end # PCI E 3 - device pci c.0 off end # PCI E 2 - device pci d.0 on end # PCI E 1 - device pci e.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on # Link 2 == LDT 2 - chip southbridge/amd/amd8131 # Southbridge - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on - device pci 9.0 on end # Broadcom 5704 - device pci 9.1 on end - end - device pci 1.1 on end - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_940 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x10f1 0x2892 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/ck804 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard & mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # Consumer IR + io 0x60 = 0x100 + end + device pnp 2e.7 off # Game port, MIDI, GPIO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic # DIMM 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic # DIMM 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic # DIMM 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic # DIMM 1-1-1 + device i2c 57 on end + end + end + device pci 1.1 on # SM 1 + chip drivers/i2c/adm1027 # ADT7463A CPU0 temp, SYS FAN 2/3/4 + device i2c 2d on end + end + chip drivers/i2c/adm1027 # ADT7463A CPU1 temp, CPU0/1 FAN , SYS FAN 1/5 + device i2c 2e on end + end + chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 6/7, SB FAN + device i2c 2a on end + end + chip drivers/generic/generic # Winbond HWM 0x92 + device i2c 49 on end + end + chip drivers/generic/generic # Winbond HWM 0x94 + device i2c 4a on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 off end # ACI + device pci 4.1 off end # MCI + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on # PCI + # chip drivers/ati/ragexl + device pci 6.0 on end + # end + device pci 8.0 on end + end + device pci a.0 off end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 on end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + end + end + device pci 18.0 on end # Link 1 + device pci 18.0 on # Link 2 == LDT 2 + chip southbridge/amd/amd8131 # Southbridge + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on + device pci 9.0 on end # Broadcom 5704 + device pci 9.1 on end + end + device pci 1.1 on end + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end end diff --git a/src/mainboard/tyan/s2895/devicetree.cb b/src/mainboard/tyan/s2895/devicetree.cb index 4250160..8d13580 100644 --- a/src/mainboard/tyan/s2895/devicetree.cb +++ b/src/mainboard/tyan/s2895/devicetree.cb @@ -1,153 +1,153 @@ chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_940 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x10f1 0x2895 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/ck804 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/smsc/lpc47b397 # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 4 - end - device pnp 2e.4 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.5 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.7 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.8 on # Hardware monitor - io 0x60 = 0x480 - chip drivers/generic/generic # LM95221 CPU temp - device i2c 2b on end - end - chip drivers/generic/generic # EMCT03 - device i2c 54 on end - end - end - device pnp 2e.a on # RT - io 0x60 = 0x400 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 1-1-1 - device i2c 57 on end - end - end - device pci 1.1 on # SM 1 - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # ACI - device pci 4.1 off end # MCI - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 1 - device pci 8.0 on end # SATA 0 - device pci 9.0 on end # PCI - device pci a.0 on end # NIC - device pci b.0 off end # PCI E 3 - device pci c.0 off end # PCI E 2 - device pci d.0 off end # PCI E 1 - device pci e.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on # Link 2 == LDT 2 - chip southbridge/amd/amd8131 # Southbridge - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on - device pci 6.0 on end # LSI SCSI - device pci 6.1 on end - end - device pci 1.1 on end - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 19.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/ck804 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on end # LPC - device pci 1.1 off end # SM - device pci 2.0 off end # USB 1.1 - device pci 2.1 off end # USB 2 - device pci 4.0 off end # ACI - device pci 4.1 off end # MCI - device pci 6.0 off end # IDE - device pci 7.0 off end # SATA 1 - device pci 8.0 off end # SATA 0 - device pci 9.0 off end # PCI - device pci a.0 on end # NIC - device pci b.0 off end # PCI E 3 - device pci c.0 off end # PCI E 2 - device pci d.0 off end # PCI E 1 - device pci e.0 on end # PCI E 0 - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 19.0 on end - device pci 19.0 on end - device pci 19.1 on end - device pci 19.2 on end - device pci 19.3 on end - end - end + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_940 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x10f1 0x2895 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/ck804 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/smsc/lpc47b397 # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 4 + end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 on # PS/2 keyboard & mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.8 on # Hardware monitor + io 0x60 = 0x480 + chip drivers/generic/generic # LM95221 CPU temp + device i2c 2b on end + end + chip drivers/generic/generic # EMCT03 + device i2c 54 on end + end + end + device pnp 2e.a on # RT + io 0x60 = 0x400 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic # DIMM 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic # DIMM 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic # DIMM 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic # DIMM 1-1-1 + device i2c 57 on end + end + end + device pci 1.1 on # SM 1 + chip drivers/generic/generic # MAC EEPROM + device i2c 51 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # ACI + device pci 4.1 off end # MCI + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on end # PCI + device pci a.0 on end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 off end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.0 on end # Link 1 + device pci 18.0 on # Link 2 == LDT 2 + chip southbridge/amd/amd8131 # Southbridge + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on + device pci 6.0 on end # LSI SCSI + device pci 6.1 on end + end + device pci 1.1 on end + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 19.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/ck804 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on end # LPC + device pci 1.1 off end # SM + device pci 2.0 off end # USB 1.1 + device pci 2.1 off end # USB 2 + device pci 4.0 off end # ACI + device pci 4.1 off end # MCI + device pci 6.0 off end # IDE + device pci 7.0 off end # SATA 1 + device pci 8.0 off end # SATA 0 + device pci 9.0 off end # PCI + device pci a.0 on end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 off end # PCI E 1 + device pci e.0 on end # PCI E 0 + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 19.0 on end + device pci 19.0 on end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + end + end end diff --git a/src/mainboard/tyan/s2912/devicetree.cb b/src/mainboard/tyan/s2912/devicetree.cb index 42f764a..cdb72e0 100644 --- a/src/mainboard/tyan/s2912/devicetree.cb +++ b/src/mainboard/tyan/s2912/devicetree.cb @@ -1,138 +1,138 @@ chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x10f1 0x2912 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO, game port, MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO PLED - device pnp 2e.9 off end # GPIO SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 1-1-1 - device i2c 57 on end - end - end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on end # PCI - device pci 6.1 off end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on end # PCI E 5 - device pci b.0 off end # PCI E 4 - device pci c.0 off end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 off end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_F # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x10f1 0x2912 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO, game port, MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO PLED + device pnp 2e.9 off end # GPIO SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic # DIMM 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic # DIMM 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic # DIMM 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic # DIMM 1-1-1 + device i2c 57 on end + end + end + device pci 1.1 on # SM 1 + # PCI device SMBus address will + # depend on addon PCI device, do + # we need to scan_smbus_bus? + # chip drivers/generic/generic # PCIXA slot 1 + # device i2c 50 on end + # end + # chip drivers/generic/generic # PCIXB slot 1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # PCIXB slot 2 + # device i2c 52 on end + # end + # chip drivers/generic/generic # PCI slot 1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # Master MCP55 PCI-E + # device i2c 54 on end + # end + # chip drivers/generic/generic # Slave MCP55 PCI-E + # device i2c 55 on end + # end + chip drivers/generic/generic # MAC EEPROM + device i2c 51 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on end # PCI + device pci 6.1 off end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on end # PCI E 5 + device pci b.0 off end # PCI E 4 + device pci c.0 off end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 off end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end end diff --git a/src/mainboard/tyan/s2912_fam10/devicetree.cb b/src/mainboard/tyan/s2912_fam10/devicetree.cb index 485c7e0..66c1aa9 100644 --- a/src/mainboard/tyan/s2912_fam10/devicetree.cb +++ b/src/mainboard/tyan/s2912_fam10/devicetree.cb @@ -1,141 +1,141 @@ chip northbridge/amd/amdfam10/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F_1207 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x10f1 0x2912 inherit - chip northbridge/amd/amdfam10 # Northbridge / RAM controller - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # SB on link 2 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO, game port, MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO PLED - device pnp 2e.9 off end # GPIO SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 1-1-1 - device i2c 57 on end - end - end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on # PCI - device pci 4.0 on end - end - device pci 6.1 off end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on end # PCI E 5 - device pci b.0 off end # PCI E 4 - device pci c.0 off end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 off end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - end - end + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_F_1207 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x10f1 0x2912 inherit + chip northbridge/amd/amdfam10 # Northbridge / RAM controller + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on # SB on link 2 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO, game port, MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO PLED + device pnp 2e.9 off end # GPIO SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic # DIMM 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic # DIMM 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic # DIMM 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic # DIMM 1-1-1 + device i2c 57 on end + end + end + device pci 1.1 on # SM 1 + # PCI device SMBus address will + # depend on addon PCI device, do + # we need to scan_smbus_bus? + # chip drivers/generic/generic # PCIXA slot 1 + # device i2c 50 on end + # end + # chip drivers/generic/generic # PCIXB slot 1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # PCIXB slot 2 + # device i2c 52 on end + # end + # chip drivers/generic/generic # PCI slot 1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # Master MCP55 PCI-E + # device i2c 54 on end + # end + # chip drivers/generic/generic # Slave MCP55 PCI-E + # device i2c 55 on end + # end + chip drivers/generic/generic # MAC EEPROM + device i2c 51 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on # PCI + device pci 4.0 on end + end + device pci 6.1 off end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on end # PCI E 5 + device pci b.0 off end # PCI E 4 + device pci c.0 off end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 off end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + end + end end diff --git a/src/mainboard/tyan/s4880/devicetree.cb b/src/mainboard/tyan/s4880/devicetree.cb index da59eb5..cf96c37 100644 --- a/src/mainboard/tyan/s4880/devicetree.cb +++ b/src/mainboard/tyan/s4880/devicetree.cb @@ -1,27 +1,27 @@ chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_940 - device lapic 0 on end - end - end + device cpu_cluster 0 on + chip cpu/amd/socket_940 + device lapic 0 on end + end + end
device domain 0 on subsystemid 0x10f1 0x4880 inherit chip northbridge/amd/amdk8 - device pci 18.0 on end # LDT0 - device pci 18.0 on end # LDT1 - device pci 18.0 on # northbridge - # devices on link 2, link 2 == LDT 2 + device pci 18.0 on end # LDT0 + device pci 18.0 on end # LDT1 + device pci 18.0 on # northbridge + # devices on link 2, link 2 == LDT 2 chip southbridge/amd/amd8131 # the on/off keyword is mandatory - device pci 0.0 on -# chip drivers/lsi/53c1030 -# device pci 4.0 on end -# device pci 4.1 on end -# register "fw_address" = "0xfff8c000" -# end - device pci 9.0 on end - device pci 9.1 on end + device pci 0.0 on +# chip drivers/lsi/53c1030 +# device pci 4.0 on end +# device pci 4.1 on end +# register "fw_address" = "0xfff8c000" +# end + device pci 9.0 on end + device pci 9.1 on end end device pci 0.1 on end device pci 1.0 on end @@ -35,48 +35,48 @@ chip northbridge/amd/amdk8/root_complex device pci 0.1 on end device pci 0.2 off end device pci 1.0 off end - device pci 6.0 on end + device pci 6.0 on end end device pci 1.0 on chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 irq 0x72 = 12 end - device pnp 2e.6 off # CIR - io 0x60 = 0x100 - end - device pnp 2e.7 off # GAME_MIDI_GIPO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end end end device pci 1.1 on end @@ -84,16 +84,15 @@ chip northbridge/amd/amdk8/root_complex device pci 1.3 on end device pci 1.5 off end device pci 1.6 off end - register "ide0_enable" = "1" - register "ide1_enable" = "1" + register "ide0_enable" = "1" + register "ide1_enable" = "1" end - end # device pci 18.0 + end # device pci 18.0
device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end - end #domain end
diff --git a/src/mainboard/tyan/s4882/devicetree.cb b/src/mainboard/tyan/s4882/devicetree.cb index 44da2c2..01ba556 100644 --- a/src/mainboard/tyan/s4882/devicetree.cb +++ b/src/mainboard/tyan/s4882/devicetree.cb @@ -1,15 +1,15 @@ chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_940 - device lapic 0 on end - end - end + device cpu_cluster 0 on + chip cpu/amd/socket_940 + device lapic 0 on end + end + end device domain 0 on subsystemid 0x10f1 0x4882 inherit chip northbridge/amd/amdk8 - device pci 18.0 on end # LDT0 - device pci 18.0 on # northbridge - # devices on link 1, link 1 == LDT 1 + device pci 18.0 on end # LDT0 + device pci 18.0 on # northbridge + # devices on link 1, link 1 == LDT 1 chip southbridge/amd/amd8131 # the on/off keyword is mandatory device pci 0.0 on @@ -18,8 +18,8 @@ chip northbridge/amd/amdk8/root_complex # device pci 4.1 on end # register "fw_address" = "0xfff8c000" # end - device pci 9.0 on end #Broadcom - device pci 9.1 on end + device pci 9.0 on end #Broadcom + device pci 9.1 on end end device pci 0.1 on end device pci 1.0 on end @@ -33,164 +33,160 @@ chip northbridge/amd/amdk8/root_complex device pci 0.1 on end device pci 0.2 off end device pci 1.0 off end - #chip drivers/ati/ragexl - device pci 6.0 on end - #end - device pci 5.0 on end #SiI + #chip drivers/ati/ragexl + device pci 6.0 on end + #end + device pci 5.0 on end #SiI end device pci 1.0 on chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 irq 0x72 = 12 end - device pnp 2e.6 off # CIR - io 0x60 = 0x100 - end - device pnp 2e.7 off # GAME_MIDI_GIPO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end end end device pci 1.1 on end device pci 1.2 on end - device pci 1.3 on -# chip drivers/i2c/i2cmux # pca9556 smbus mux -# device i2c 18 on #0 pca9516 2, 1 -# chip drivers/i2c/lm63 #cpu0 temp -# device i2c 4c on end -# end + device pci 1.3 on +# chip drivers/i2c/i2cmux # pca9556 smbus mux +# device i2c 18 on #0 pca9516 2, 1 +# chip drivers/i2c/lm63 #cpu0 temp +# device i2c 4c on end +# end # end -# device i2c 18 on #1 pca9516 1, 1 -# chip drivers/generic/generic #dimm 1-0-0 -# device i2c 50 on end -# end -# chip drivers/generic/generic #dimm 1-0-1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #dimm 1-1-0 -# device i2c 52 on end -# end -# chip drivers/generic/generic #dimm 1-1-1 -# device i2c 53 on end -# end -# end -# device i2c 18 on #2 pca9516 1, 2 -# chip drivers/generic/generic #dimm 0-0-0 -# device i2c 50 on end -# end -# chip drivers/generic/generic #dimm 0-0-1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #dimm 0-1-0 -# device i2c 52 on end -# end -# chip drivers/generic/generic #dimm 0-1-1 -# device i2c 53 on end -# end -# end -# device i2c 18 on #3 pca9516 1, 3 -# chip drivers/generic/generic #dimm 3-0-0 -# device i2c 50 on end -# end -# chip drivers/generic/generic #dimm 3-0-1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #dimm 3-1-0 -# device i2c 52 on end -# end -# chip drivers/generic/generic #dimm 3-1-1 -# device i2c 53 on end -# end -# end -# device i2c 18 on #4 pca9516 1, 4 -# chip drivers/generic/generic #dimm 2-0-0 -# device i2c 50 on end -# end -# chip drivers/generic/generic #dimm 2-0-1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #dimm 2-1-0 -# device i2c 52 on end -# end -# chip drivers/generic/generic #dimm 2-1-1 -# device i2c 53 on end -# end -# end -# device i2c 18 on #5 pca9516 2, 2 -# chip drivers/i2c/lm63 #cpu1 temp -# device i2c 4c on end -# end -# end -# device i2c 18 on #6 pca9516 2, 3 -# chip drivers/i2c/lm63 #cpu2 temp -# device i2c 4c on end -# end -# end -# device i2c 18 on #7 pca9516 2, 4 -# chip drivers/i2c/lm63 #cpu3 temp -# device i2c 4c on end -# end -# end -# end # i2cmux -# chip drivers/i2c/adm1027 # ADM1027 CPU1 vid and System FAN... -# device i2c 2e on end -# end -# chip drivers/generic/generic # Winbond HWM 0x54 CPU0 vid -# device i2c 2a on end -# end -# chip drivers/generic/generic # Winbond HWM 0x92 -# device i2c 49 on end -# end -# chip drivers/generic/generic # Winbond HWM 0x94 -# device i2c 4a on end -# end -# chip drivers/generic/generic # ?? -# device i2c 69 on end -# end - end # acpi +# device i2c 18 on #1 pca9516 1, 1 +# chip drivers/generic/generic #dimm 1-0-0 +# device i2c 50 on end +# end +# chip drivers/generic/generic #dimm 1-0-1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #dimm 1-1-0 +# device i2c 52 on end +# end +# chip drivers/generic/generic #dimm 1-1-1 +# device i2c 53 on end +# end +# end +# device i2c 18 on #2 pca9516 1, 2 +# chip drivers/generic/generic #dimm 0-0-0 +# device i2c 50 on end +# end +# chip drivers/generic/generic #dimm 0-0-1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #dimm 0-1-0 +# device i2c 52 on end +# end +# chip drivers/generic/generic #dimm 0-1-1 +# device i2c 53 on end +# end +# end +# device i2c 18 on #3 pca9516 1, 3 +# chip drivers/generic/generic #dimm 3-0-0 +# device i2c 50 on end +# end +# chip drivers/generic/generic #dimm 3-0-1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #dimm 3-1-0 +# device i2c 52 on end +# end +# chip drivers/generic/generic #dimm 3-1-1 +# device i2c 53 on end +# end +# end +# device i2c 18 on #4 pca9516 1, 4 +# chip drivers/generic/generic #dimm 2-0-0 +# device i2c 50 on end +# end +# chip drivers/generic/generic #dimm 2-0-1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #dimm 2-1-0 +# device i2c 52 on end +# end +# chip drivers/generic/generic #dimm 2-1-1 +# device i2c 53 on end +# end +# end +# device i2c 18 on #5 pca9516 2, 2 +# chip drivers/i2c/lm63 #cpu1 temp +# device i2c 4c on end +# end +# end +# device i2c 18 on #6 pca9516 2, 3 +# chip drivers/i2c/lm63 #cpu2 temp +# device i2c 4c on end +# end +# end +# device i2c 18 on #7 pca9516 2, 4 +# chip drivers/i2c/lm63 #cpu3 temp +# device i2c 4c on end +# end +# end +# end # i2cmux +# chip drivers/i2c/adm1027 # ADM1027 CPU1 vid and System FAN... +# device i2c 2e on end +# end +# chip drivers/generic/generic # Winbond HWM 0x54 CPU0 vid +# device i2c 2a on end +# end +# chip drivers/generic/generic # Winbond HWM 0x92 +# device i2c 49 on end +# end +# chip drivers/generic/generic # Winbond HWM 0x94 +# device i2c 4a on end +# end +# chip drivers/generic/generic # ?? +# device i2c 69 on end +# end + end # acpi device pci 1.5 off end device pci 1.6 off end register "ide0_enable" = "1" - register "ide1_enable" = "1" + register "ide1_enable" = "1" end - end # device pci 18.0 - - device pci 18.0 on end - + end # device pci 18.0 + device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end - end end - diff --git a/src/mainboard/tyan/s8226/devicetree.cb b/src/mainboard/tyan/s8226/devicetree.cb index f879ec5..355dd69 100644 --- a/src/mainboard/tyan/s8226/devicetree.cb +++ b/src/mainboard/tyan/s8226/devicetree.cb @@ -25,97 +25,96 @@ chip northbridge/amd/agesa/family15/root_complex device domain 0 on subsystemid 0x15d9 0xab11 inherit #Tyan chip northbridge/amd/agesa/family15 # CPU side of HT root complex - device pci 18.0 on # Put IO-HUB at link_num 0, Instead of HT Link topology - chip northbridge/amd/cimx/rd890 # Southbridge PCI side of HT Root complex - device pci 0.0 on end # HT Root Complex 0x9600 - device pci 0.1 off end # CLKCONFIG - device pci 2.0 on end # GPP1 Port0 x16 SLOT4, 0x5A16 - device pci 3.0 off end # GPP1 Port1 - device pci 4.0 on end # GPP3a Port0 x4 SAS - device pci 5.0 on end # GPP3a Port1 - device pci 6.0 on end # GPP3a Port2 - device pci 7.0 on end # GPP3a Port3 - device pci 8.0 off end # NB/SB Link P2P bridge, should be hidden at boot time - device pci 9.0 on end # GPP3a Port4 x1 NC - device pci a.0 on end # GPP3a Port5 x1 NC - device pci b.0 on end # GPP2 Port0 (Not for sr5650) - device pci c.0 off end # GPP2 Port1 (Not for sr5650/sr5670) - device pci d.0 on end # GPP3b Port0 (Not for sr5650/sr5670) 0x5A1E, Intel 82576 - register "gpp1_configuration" = "0" # Configuration 16:0 default - register "gpp2_configuration" = "0" # Configuration 8:8 - register "gpp3a_configuration" = "2" # 2 Configuration 4:1:1:0:0:0, 11 Configuration 1:1:1:1:1:1 + device pci 18.0 on # Put IO-HUB at link_num 0, Instead of HT Link topology + chip northbridge/amd/cimx/rd890 # Southbridge PCI side of HT Root complex + device pci 0.0 on end # HT Root Complex 0x9600 + device pci 0.1 off end # CLKCONFIG + device pci 2.0 on end # GPP1 Port0 x16 SLOT4, 0x5A16 + device pci 3.0 off end # GPP1 Port1 + device pci 4.0 on end # GPP3a Port0 x4 SAS + device pci 5.0 on end # GPP3a Port1 + device pci 6.0 on end # GPP3a Port2 + device pci 7.0 on end # GPP3a Port3 + device pci 8.0 off end # NB/SB Link P2P bridge, should be hidden at boot time + device pci 9.0 on end # GPP3a Port4 x1 NC + device pci a.0 on end # GPP3a Port5 x1 NC + device pci b.0 on end # GPP2 Port0 (Not for sr5650) + device pci c.0 off end # GPP2 Port1 (Not for sr5650/sr5670) + device pci d.0 on end # GPP3b Port0 (Not for sr5650/sr5670) 0x5A1E, Intel 82576 + register "gpp1_configuration" = "0" # Configuration 16:0 default + register "gpp2_configuration" = "0" # Configuration 8:8 + register "gpp3a_configuration" = "2" # 2 Configuration 4:1:1:0:0:0, 11 Configuration 1:1:1:1:1:1 register "port_enable" = "0x3ef6" end #northbridge/amd/cimx/rd890 - chip southbridge/amd/cimx/sb700 # it is under NB/SB Link, but on the same pci bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB1 - device pci 12.1 on end # USB1 - device pci 12.2 on end # USB1 - device pci 13.0 on end # USB2 - device pci 13.1 on end # USB2 - device pci 13.2 on end # USB2 - device pci 14.0 on end # SM - device pci 14.1 off end # IDE 0x439c - device pci 14.2 off end # HDA 0x4383, s8226 not have codec. - device pci 14.3 on # LPC 0x439d + chip southbridge/amd/cimx/sb700 # it is under NB/SB Link, but on the same pci bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB1 + device pci 12.1 on end # USB1 + device pci 12.2 on end # USB1 + device pci 13.0 on end # USB2 + device pci 13.1 on end # USB2 + device pci 13.2 on end # USB2 + device pci 14.0 on end # SM + device pci 14.1 off end # IDE 0x439c + device pci 14.2 off end # HDA 0x4383, s8226 not have codec. + device pci 14.3 on # LPC 0x439d chip superio/winbond/w83627dhg - device pnp 2e.0 off # Floppy + device pnp 2e.0 off # Floppy io 0x60 = 0x3f0 irq 0x70 = 6 drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port + device pnp 2e.1 off # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 end - device pnp 2e.2 on # Com1 + device pnp 2e.2 on # Com1 io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.3 on # Com2 + device pnp 2e.3 on # Com2 io 0x60 = 0x2f8 irq 0x70 = 3 end ## though UARTs are on the NUVOTON BMC, superio only used to support PS2 KB/MS## - device pnp 2e.5 on # PS/2 keyboard & mouse + device pnp 2e.5 on # PS/2 keyboard & mouse io 0x60 = 0x60 io 0x62 = 0x64 - irq 0x70 = 0x01 #keyboard - irq 0x72 = 0x0C #mouse + irq 0x70 = 0x01 #keyboard + irq 0x72 = 0x0C #mouse end - device pnp 2e.6 off # SPI + device pnp 2e.6 off # SPI end - device pnp 2e.307 off # GPIO6 + device pnp 2e.307 off # GPIO6 end - device pnp 2e.8 off # WDTO#, PLED + device pnp 2e.8 off # WDTO#, PLED end - device pnp 2e.009 off # GPIO2 + device pnp 2e.009 off # GPIO2 end - device pnp 2e.109 off # GPIO3 + device pnp 2e.109 off # GPIO3 end - device pnp 2e.209 off # GPIO4 + device pnp 2e.209 off # GPIO4 end - device pnp 2e.309 off # GPIO5 + device pnp 2e.309 off # GPIO5 end - device pnp 2e.a off # ACPI + device pnp 2e.a off # ACPI end - device pnp 2e.b off # HWM + device pnp 2e.b off # HWM io 0x60 = 0x290 end device pnp 2e.c off # PECI, SST end end #superio/winbond/w83627dhg chip drivers/i2c/w83795 - device pnp 5e on #hwm + device pnp 5e on #hwm end end #drivers/i2c/w83795 end # LPC device pci 14.4 on end # PCI 0x4384 device pci 14.5 on end # USB 3 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE end # southbridge/amd/cimx/sb700 end # device pci 18.0 - device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end @@ -130,4 +129,3 @@ chip northbridge/amd/agesa/family15/root_complex end #chip northbridge/amd/agesa/family15 # CPU side of HT root complex end #domain end #northbridge/amd/agesa/family15/root_complex - diff --git a/src/mainboard/via/epia-cn/devicetree.cb b/src/mainboard/via/epia-cn/devicetree.cb index 028cb88..35d3941 100644 --- a/src/mainboard/via/epia-cn/devicetree.cb +++ b/src/mainboard/via/epia-cn/devicetree.cb @@ -1,61 +1,61 @@ chip northbridge/via/cn700 # Northbridge - device domain 0 on # PCI domain - device pci 0.0 on end # AGP Bridge - device pci 0.1 on end # Error Reporting - device pci 0.2 on end # Host Bus Control - device pci 0.3 on end # Memory Controller - device pci 0.4 on end # Power Management - device pci 0.7 on end # V-Link Controller - device pci 1.0 on end # PCI Bridge - chip southbridge/via/vt8237r # Southbridge - # Enable both IDE channels. - register "ide0_enable" = "1" - register "ide1_enable" = "1" - # Both cables are 40pin. - register "ide0_80pin_cable" = "0" - register "ide1_80pin_cable" = "0" - device pci f.0 on end # IDE - register "fn_ctrl_lo" = "0x80" - register "fn_ctrl_hi" = "0x1d" - device pci 10.0 on end # OHCI - device pci 10.1 on end # OHCI - device pci 10.2 on end # OHCI - device pci 10.3 on end # OHCI - device pci 10.4 on end # EHCI - device pci 10.5 on end # UDCI - device pci 11.0 on # Southbridge LPC - chip superio/via/vt1211 # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.b on # HWM - io 0x60 = 0xec00 - end - end - end - device pci 11.5 on end # AC'97 audio - # device pci 11.6 off end # AC'97 Modem - device pci 12.0 on end # Ethernet - end - end - device cpu_cluster 0 on # APIC cluster - chip cpu/via/c7 # VIA C7 - device lapic 0 on end # APIC - end - end + device domain 0 on # PCI domain + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + chip southbridge/via/vt8237r # Southbridge + # Enable both IDE channels. + register "ide0_enable" = "1" + register "ide1_enable" = "1" + # Both cables are 40pin. + register "ide0_80pin_cable" = "0" + register "ide1_80pin_cable" = "0" + device pci f.0 on end # IDE + register "fn_ctrl_lo" = "0x80" + register "fn_ctrl_hi" = "0x1d" + device pci 10.0 on end # OHCI + device pci 10.1 on end # OHCI + device pci 10.2 on end # OHCI + device pci 10.3 on end # OHCI + device pci 10.4 on end # EHCI + device pci 10.5 on end # UDCI + device pci 11.0 on # Southbridge LPC + chip superio/via/vt1211 # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.b on # HWM + io 0x60 = 0xec00 + end + end + end + device pci 11.5 on end # AC'97 audio + # device pci 11.6 off end # AC'97 Modem + device pci 12.0 on end # Ethernet + end + end + device cpu_cluster 0 on # APIC cluster + chip cpu/via/c7 # VIA C7 + device lapic 0 on end # APIC + end + end end diff --git a/src/mainboard/via/epia-m/devicetree.cb b/src/mainboard/via/epia-m/devicetree.cb index 98f6b4f..1fb1e18 100644 --- a/src/mainboard/via/epia-m/devicetree.cb +++ b/src/mainboard/via/epia-m/devicetree.cb @@ -2,7 +2,7 @@ chip northbridge/via/vt8623
device cpu_cluster 0 on chip cpu/via/c3 - device lapic 0 on end + device lapic 0 on end end end
@@ -18,7 +18,7 @@ chip northbridge/via/vt8623 device pci 10.2 on end # USB 1.1 device pci 10.3 on end # USB 2
- device pci 11.0 on # Southbridge + device pci 11.0 on # Southbridge chip superio/via/vt1211 device pnp 2e.0 on # Floppy io 0x60 = 0x3f0 @@ -45,11 +45,11 @@ chip northbridge/via/vt8623 end end
- device pci 11.1 on end # IDE + device pci 11.1 on end # IDE # 2-4 non existant? - device pci 11.5 on end # AC97 Audio - device pci 11.6 off end # AC97 Modem - device pci 12.0 on end # Ethernet + device pci 11.5 on end # AC97 Audio + device pci 11.6 off end # AC97 Modem + device pci 12.0 on end # Ethernet end # This is on the EPIA MII, not the M. chip southbridge/ricoh/rl5c476 diff --git a/src/mainboard/via/epia-m700/devicetree.cb b/src/mainboard/via/epia-m700/devicetree.cb index 2f971c2..105a13b 100644 --- a/src/mainboard/via/epia-m700/devicetree.cb +++ b/src/mainboard/via/epia-m700/devicetree.cb @@ -1,24 +1,24 @@ chip northbridge/via/vx800 # Northbridge - device domain 0 on - device pci 0.0 on end # AGP Bridge - device pci 0.1 on end # Error Reporting - device pci 0.2 on end # Host Bus Control - device pci 0.3 on end # Memory Controller - device pci 0.4 on end # Power Management - device pci 0.7 on end # V-Link Controller - device pci 1.0 on end # PCI Bridge - # device pci f.0 on end # IDE/SATA - # device pci f.1 on end # IDE - # device pci 10.0 on end # USB 1.1 - # device pci 10.1 on end # USB 1.1 - # device pci 10.2 on end # USB 1.1 - # device pci 10.4 on end # USB 2.0 - # device pci 11.0 on # Southbridge LPC - # end - end - device cpu_cluster 0 on # APIC cluster - chip cpu/via/c7 # VIA C7 - device lapic 0 on end # APIC - end - end + device domain 0 on + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + # device pci f.0 on end # IDE/SATA + # device pci f.1 on end # IDE + # device pci 10.0 on end # USB 1.1 + # device pci 10.1 on end # USB 1.1 + # device pci 10.2 on end # USB 1.1 + # device pci 10.4 on end # USB 2.0 + # device pci 11.0 on # Southbridge LPC + # end + end + device cpu_cluster 0 on # APIC cluster + chip cpu/via/c7 # VIA C7 + device lapic 0 on end # APIC + end + end end diff --git a/src/mainboard/via/epia-m850/devicetree.cb b/src/mainboard/via/epia-m850/devicetree.cb index 0c21cc8..6003ecc 100644 --- a/src/mainboard/via/epia-m850/devicetree.cb +++ b/src/mainboard/via/epia-m850/devicetree.cb @@ -28,12 +28,12 @@ chip northbridge/via/vx900 # Northbridge end end device domain 0 on - device pci 0.0 on end # [0410] Host controller - device pci 0.1 on end # [1410] Error Reporting - device pci 0.2 on end # [2410] CPU Bus Control - device pci 0.3 on end # [3410] DRAM Bus Control - device pci 0.4 on end # [4410] Power Management - device pci 0.5 on # [5410] APIC+Traffic Control + device pci 0.0 on end # [0410] Host controller + device pci 0.1 on end # [1410] Error Reporting + device pci 0.2 on end # [2410] CPU Bus Control + device pci 0.3 on end # [3410] DRAM Bus Control + device pci 0.4 on end # [4410] Power Management + device pci 0.5 on # [5410] APIC+Traffic Control chip drivers/generic/ioapic register "have_isa_interrupts" = "0" register "irq_on_fsb" = "1" @@ -42,23 +42,23 @@ chip northbridge/via/vx900 # Northbridge device ioapic 2 on end end end - device pci 0.6 off end # [6410] Scratch Registers - device pci 0.7 on end # [7410] V4 Link Control - device pci 1.0 on # [7122] VGA Chrome9 HD + device pci 0.6 off end # [6410] Scratch Registers + device pci 0.7 on end # [7410] V4 Link Control + device pci 1.0 on # [7122] VGA Chrome9 HD ioapic_irq 2 INTA 0x28 end - device pci 1.1 on # [9170] Audio Device + device pci 1.1 on # [9170] Audio Device ioapic_irq 2 INTA 0x29 end - device pci 3.0 on end # [a410] PEX1 - device pci 3.1 on end # [b410] PEX2 - device pci 3.2 on end # [c410] PEX3 - device pci 3.3 on end # [d410] PEX4 - device pci 3.4 on end # [e410] PCIE bridge - device pci b.0 on end # [a409] USB Device - device pci c.0 off end # [95d0] SDIO Host Controller - device pci d.0 off end # [9530] Memory Card controller - device pci f.0 on # [9001] SATA Controller + device pci 3.0 on end # [a410] PEX1 + device pci 3.1 on end # [b410] PEX2 + device pci 3.2 on end # [c410] PEX3 + device pci 3.3 on end # [d410] PEX4 + device pci 3.4 on end # [e410] PCIE bridge + device pci b.0 on end # [a409] USB Device + device pci c.0 off end # [95d0] SDIO Host Controller + device pci d.0 off end # [9530] Memory Card controller + device pci f.0 on # [9001] SATA Controller ioapic_irq 1 INTA 0x15 end device pci 10.0 on end # [3038] USB 1.1 diff --git a/src/mainboard/via/epia-n/devicetree.cb b/src/mainboard/via/epia-n/devicetree.cb index d17b96d..e3257cc 100644 --- a/src/mainboard/via/epia-n/devicetree.cb +++ b/src/mainboard/via/epia-n/devicetree.cb @@ -21,81 +21,81 @@
chip northbridge/via/cn400 # Northbridge
- device cpu_cluster 0 on # APIC cluster - chip cpu/via/c3 # VIA C3 - device lapic 0 on end # APIC - end - end + device cpu_cluster 0 on # APIC cluster + chip cpu/via/c3 # VIA C3 + device lapic 0 on end # APIC + end + end
- device domain 0 on # PCI domain - device pci 0.0 on end # AGP Bridge - device pci 0.1 on end # Error Reporting - device pci 0.2 on end # Host Bus Control - device pci 0.3 on end # Memory Controller - device pci 0.4 on end # Power Management - device pci 0.7 on end # V-Link Controller - device pci 1.0 on end # PCI Bridge - chip southbridge/via/vt8237r # Southbridge - # Enable both IDE channels. - register "ide0_enable" = "1" - register "ide1_enable" = "1" - # Both cables are 40pin. - register "ide0_80pin_cable" = "0" - register "ide1_80pin_cable" = "0" - device pci f.0 on end # IDE/SATA - device pci f.1 on end # IDE - register "fn_ctrl_lo" = "0xC0" # Disable AC/MC97 - register "fn_ctrl_hi" = "0x9d" # Disable USB Direct & LAN Gating - device pci 10.0 on end # OHCI - device pci 10.1 on end # OHCI - device pci 10.2 on end # OHCI - device pci 10.3 on end # OHCI - device pci 10.4 on end # EHCI - device pci 10.5 off end # USB Direct - device pci 11.0 on # Southbridge LPC - chip superio/winbond/w83697hf # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.6 off # IR Port - io 0x60 = 0x000 - end - device pnp 2e.7 off # GPIO 1 - io 0x60 = 0x201 # 0x201 - end - device pnp 2e.8 off # GPIO 5 - io 0x60 = 0x330 # 0x330 - end - device pnp 2e.9 off # GPIO 2, 3,and 4 - io 0x60 = 0x000 # - end - device pnp 2e.a off # ACPI - io 0x60 = 0x000 # - end - device pnp 2e.b on # HWM - io 0x60 = 0x290 - irq 0x70 = 0 - end - end - end - device pci 11.5 off end # AC'97 audio - device pci 11.6 off end # AC'97 Modem - device pci 12.0 on end # Ethernet - end - end + device domain 0 on # PCI domain + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + chip southbridge/via/vt8237r # Southbridge + # Enable both IDE channels. + register "ide0_enable" = "1" + register "ide1_enable" = "1" + # Both cables are 40pin. + register "ide0_80pin_cable" = "0" + register "ide1_80pin_cable" = "0" + device pci f.0 on end # IDE/SATA + device pci f.1 on end # IDE + register "fn_ctrl_lo" = "0xC0" # Disable AC/MC97 + register "fn_ctrl_hi" = "0x9d" # Disable USB Direct & LAN Gating + device pci 10.0 on end # OHCI + device pci 10.1 on end # OHCI + device pci 10.2 on end # OHCI + device pci 10.3 on end # OHCI + device pci 10.4 on end # EHCI + device pci 10.5 off end # USB Direct + device pci 11.0 on # Southbridge LPC + chip superio/winbond/w83697hf # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.6 off # IR Port + io 0x60 = 0x000 + end + device pnp 2e.7 off # GPIO 1 + io 0x60 = 0x201 # 0x201 + end + device pnp 2e.8 off # GPIO 5 + io 0x60 = 0x330 # 0x330 + end + device pnp 2e.9 off # GPIO 2, 3,and 4 + io 0x60 = 0x000 # + end + device pnp 2e.a off # ACPI + io 0x60 = 0x000 # + end + device pnp 2e.b on # HWM + io 0x60 = 0x290 + irq 0x70 = 0 + end + end + end + device pci 11.5 off end # AC'97 audio + device pci 11.6 off end # AC'97 Modem + device pci 12.0 on end # Ethernet + end + end end diff --git a/src/mainboard/via/epia/devicetree.cb b/src/mainboard/via/epia/devicetree.cb index d5e16ac..5392f26 100644 --- a/src/mainboard/via/epia/devicetree.cb +++ b/src/mainboard/via/epia/devicetree.cb @@ -1,6 +1,6 @@ chip northbridge/via/vt8601 device domain 0 on - device pci 0.0 on end # Northbridge + device pci 0.0 on end # Northbridge # device pci 0.1 on # AGP bridge # device pci 0.0 on end # Integrated VGA # end @@ -8,54 +8,54 @@ chip northbridge/via/vt8601 register "enable_native_ide" = "0" register "enable_com_ports" = "1" register "enable_keyboard" = "0" - device pci 11.0 on # Southbrdge + device pci 11.0 on # Southbrdge chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end end - device pnp 2e.6 off end # CIR - device pnp 2e.7 off end # GAME_MIDI_GIPO1 - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor + device pnp 2e.6 off end # CIR + device pnp 2e.7 off end # GAME_MIDI_GIPO1 + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor io 0x60 = 0x290 end end - device pci 11.1 on end # Ide + device pci 11.1 on end # Ide device pci 11.2 off end # Usb port 0-1 device pci 11.3 off end # Usb port 2-3 device pci 11.4 off end # ACPI device pci 11.5 off end # AC97 Audio - device pci 11.6 on end # AC97 Modem - device pci 12.0 on end # Ethernet - end + device pci 11.6 on end # AC97 Modem + device pci 12.0 on end # Ethernet + end end
- device cpu_cluster 0 on - chip cpu/via/c3 - device lapic 0 on end - end - end + device cpu_cluster 0 on + chip cpu/via/c3 + device lapic 0 on end + end + end end diff --git a/src/mainboard/via/pc2500e/devicetree.cb b/src/mainboard/via/pc2500e/devicetree.cb index 17bc35e..ba64c99 100644 --- a/src/mainboard/via/pc2500e/devicetree.cb +++ b/src/mainboard/via/pc2500e/devicetree.cb @@ -1,89 +1,89 @@ chip northbridge/via/cn700 # Northbridge - device domain 0 on # PCI domain - subsystemid 0x1019 0xaa51 inherit - device pci 0.0 on end # AGP Bridge - device pci 0.1 on end # Error Reporting - device pci 0.2 on end # Host Bus Control - device pci 0.3 on end # Memory Controller - device pci 0.4 on end # Power Management - device pci 0.7 on end # V-Link Controller - device pci 1.0 on end # PCI Bridge - chip southbridge/via/vt8237r # Southbridge - # Enable both IDE channels. - register "ide0_enable" = "1" - register "ide1_enable" = "1" - # Both cables are 40pin. - register "ide0_80pin_cable" = "0" - register "ide1_80pin_cable" = "0" - device pci f.0 on end # SATA - device pci f.1 on end # IDE - register "fn_ctrl_lo" = "0x80" - register "fn_ctrl_hi" = "0x1d" - device pci 10.0 on end # UHCI - device pci 10.1 on end # UHCI - device pci 10.2 on end # UHCI - device pci 10.3 on end # UHCI - device pci 10.4 on end # EHCI - device pci 10.5 on end # UDCI - device pci 11.0 on # Southbridge LPC - chip superio/ite/it8716f # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # COM2 (N/A on this board) - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.4 on # Environment controller - io 0x60 = 0x290 - io 0x62 = 0x0000 - irq 0x70 = 9 - end - device pnp 2e.5 off # PS/2 keyboard (not used) - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 off # PS/2 mouse (not used) - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x60 = 0x0000 - io 0x62 = 0x0800 - io 0x64 = 0x0000 - end - device pnp 2e.8 off # MIDI port (N/A) - io 0x60 = 0x300 - irq 0x70 = 10 - end - device pnp 2e.9 off # Game port (N/A) - io 0x60 = 0x201 - end - device pnp 2e.a on # Consumer IR - io 0x60 = 0x310 - irq 0x70 = 11 - end - end - end - device pci 11.5 on end # AC'97 audio - # device pci 11.6 off end # AC'97 modem (N/A) - device pci 12.0 on end # Ethernet - end - end - device cpu_cluster 0 on # APIC cluster - chip cpu/via/c7 # VIA C7 - device lapic 0 on end # APIC - end - end + device domain 0 on # PCI domain + subsystemid 0x1019 0xaa51 inherit + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + chip southbridge/via/vt8237r # Southbridge + # Enable both IDE channels. + register "ide0_enable" = "1" + register "ide1_enable" = "1" + # Both cables are 40pin. + register "ide0_80pin_cable" = "0" + register "ide1_80pin_cable" = "0" + device pci f.0 on end # SATA + device pci f.1 on end # IDE + register "fn_ctrl_lo" = "0x80" + register "fn_ctrl_hi" = "0x1d" + device pci 10.0 on end # UHCI + device pci 10.1 on end # UHCI + device pci 10.2 on end # UHCI + device pci 10.3 on end # UHCI + device pci 10.4 on end # EHCI + device pci 10.5 on end # UDCI + device pci 11.0 on # Southbridge LPC + chip superio/ite/it8716f # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # COM2 (N/A on this board) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.4 on # Environment controller + io 0x60 = 0x290 + io 0x62 = 0x0000 + irq 0x70 = 9 + end + device pnp 2e.5 off # PS/2 keyboard (not used) + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 off # PS/2 mouse (not used) + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO + io 0x60 = 0x0000 + io 0x62 = 0x0800 + io 0x64 = 0x0000 + end + device pnp 2e.8 off # MIDI port (N/A) + io 0x60 = 0x300 + irq 0x70 = 10 + end + device pnp 2e.9 off # Game port (N/A) + io 0x60 = 0x201 + end + device pnp 2e.a on # Consumer IR + io 0x60 = 0x310 + irq 0x70 = 11 + end + end + end + device pci 11.5 on end # AC'97 audio + # device pci 11.6 off end # AC'97 modem (N/A) + device pci 12.0 on end # Ethernet + end + end + device cpu_cluster 0 on # APIC cluster + chip cpu/via/c7 # VIA C7 + device lapic 0 on end # APIC + end + end end diff --git a/src/mainboard/via/vt8454c/devicetree.cb b/src/mainboard/via/vt8454c/devicetree.cb index 87d2ed1..d880ffe 100644 --- a/src/mainboard/via/vt8454c/devicetree.cb +++ b/src/mainboard/via/vt8454c/devicetree.cb @@ -5,22 +5,22 @@ chip northbridge/via/cx700 end end device domain 0 on - device pci 0.0 on end # AGP Bridge - device pci 0.1 on end # Error Reporting - device pci 0.2 on end # Host Bus Control - device pci 0.3 on end # Memory Controller - device pci 0.4 on end # Power Management - device pci 0.7 on end # V-Link Controller - device pci 1.0 on # PCI Bridge + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on # PCI Bridge device pci 0.0 on end # Onboard Video end # PCI Bridge - device pci f.0 on end # IDE/SATA - #device pci f.1 on end # IDE - device pci 10.0 on end # USB 1.1 - device pci 10.1 on end # USB 1.1 - device pci 10.2 on end # USB 1.1 - device pci 10.4 on end # USB 2.0 - device pci 11.0 on # Southbridge LPC + device pci f.0 on end # IDE/SATA + #device pci f.1 on end # IDE + device pci 10.0 on end # USB 1.1 + device pci 10.1 on end # USB 1.1 + device pci 10.2 on end # USB 1.1 + device pci 10.4 on end # USB 2.0 + device pci 11.0 on # Southbridge LPC chip superio/via/vt1211 device pnp 2e.0 on # Floppy io 0x60 = 0x3f0 @@ -46,9 +46,8 @@ chip northbridge/via/cx700 end # superio end # pci 11.0 # 1-4 non existant - #device pci 11.5 on end # AC97 Audio - #device pci 11.6 off end # AC97 Modem - #device pci 12.0 on end # Ethernet + #device pci 11.5 on end # AC97 Audio + #device pci 11.6 off end # AC97 Modem + #device pci 12.0 on end # Ethernet end # pci domain 0 end # cx700 - diff --git a/src/mainboard/winent/mb6047/devicetree.cb b/src/mainboard/winent/mb6047/devicetree.cb index 81f5aae..4895d71 100644 --- a/src/mainboard/winent/mb6047/devicetree.cb +++ b/src/mainboard/winent/mb6047/devicetree.cb @@ -1,120 +1,120 @@ chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_940 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x10de 0xcb84 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/ck804 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627thg # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off end # Consumer IR - device pnp 2e.7 off end # Game port, MIDI, GPIO1 - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 0 - end - end - end - device pci 1.1 on # SM 0 - # chip drivers/generic/generic # DIMM 0-0-0 - # device i2c 50 on end - # end - # chip drivers/generic/generic # DIMM 0-0-1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # DIMM 0-1-0 - # device i2c 52 on end - # end - # chip drivers/generic/generic # DIMM 0-1-1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # DIMM 1-0-0 - # device i2c 54 on end - # end - # chip drivers/generic/generic # DIMM 1-0-1 - # device i2c 55 on end - # end - # chip drivers/generic/generic # DIMM 1-1-0 - # device i2c 56 on end - # end - # chip drivers/generic/generic # DIMM 1-1-1 - # device i2c 57 on end - # end - end - # device pci 1.1 on # SM 1 - # chip drivers/i2c/adm1027 # ADT7463A CPU0 temp, SYS FAN 2/3/4 - # device i2c 2d on end - # end - # chip drivers/i2c/adm1027 # ADT7463A CPU1 temp, CPU0/1 FAN , SYS FAN 1/5 - # device i2c 2e on end - # end - # chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 6/7, SB FAN - # device i2c 2a on end - # end - # chip drivers/generic/generic # Winbond HWM 0x92 - # device i2c 49 on end - # end - # chip drivers/generic/generic # Winbond HWM 0x94 - # device i2c 4a on end - # end - # end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # ACI - device pci 4.1 off end # MCI - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 1 - device pci 8.0 on end # SATA 0 - device pci 9.0 on # PCI - # device pci 6.0 on end - end - device pci a.0 on end # NIC - device pci b.0 on end # PCI E 3 - device pci c.0 on end # PCI E 2 - device pci d.0 on end # PCI E 1 - device pci e.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "ide1_enable" = "0" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on end # Link 2 == LDT 2 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_940 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x10de 0xcb84 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/ck804 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627thg # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard & mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off end # Consumer IR + device pnp 2e.7 off end # Game port, MIDI, GPIO1 + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 0 + end + end + end + device pci 1.1 on # SM 0 + # chip drivers/generic/generic # DIMM 0-0-0 + # device i2c 50 on end + # end + # chip drivers/generic/generic # DIMM 0-0-1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # DIMM 0-1-0 + # device i2c 52 on end + # end + # chip drivers/generic/generic # DIMM 0-1-1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # DIMM 1-0-0 + # device i2c 54 on end + # end + # chip drivers/generic/generic # DIMM 1-0-1 + # device i2c 55 on end + # end + # chip drivers/generic/generic # DIMM 1-1-0 + # device i2c 56 on end + # end + # chip drivers/generic/generic # DIMM 1-1-1 + # device i2c 57 on end + # end + end + # device pci 1.1 on # SM 1 + # chip drivers/i2c/adm1027 # ADT7463A CPU0 temp, SYS FAN 2/3/4 + # device i2c 2d on end + # end + # chip drivers/i2c/adm1027 # ADT7463A CPU1 temp, CPU0/1 FAN , SYS FAN 1/5 + # device i2c 2e on end + # end + # chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 6/7, SB FAN + # device i2c 2a on end + # end + # chip drivers/generic/generic # Winbond HWM 0x92 + # device i2c 49 on end + # end + # chip drivers/generic/generic # Winbond HWM 0x94 + # device i2c 4a on end + # end + # end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # ACI + device pci 4.1 off end # MCI + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on # PCI + # device pci 6.0 on end + end + device pci a.0 on end # NIC + device pci b.0 on end # PCI E 3 + device pci c.0 on end # PCI E 2 + device pci d.0 on end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "0" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + end + end + device pci 18.0 on end # Link 1 + device pci 18.0 on end # Link 2 == LDT 2 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end end diff --git a/src/mainboard/winent/pl6064/devicetree.cb b/src/mainboard/winent/pl6064/devicetree.cb index f900f78..40c61ea 100644 --- a/src/mainboard/winent/pl6064/devicetree.cb +++ b/src/mainboard/winent/pl6064/devicetree.cb @@ -3,7 +3,7 @@ chip northbridge/amd/lx device pci 1.0 on end # Northbridge device pci 1.1 on end # Graphics chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK # SIRQ Mode = Active(Quiet) mode. Save power.... # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK register "lpc_serirq_enable" = "0x0000105a" @@ -57,7 +57,7 @@ chip northbridge/amd/lx device pnp 2e.7 off end # GAME_MIDI_GIPO1 device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 - device pnp 2e.a on # ACPI + device pnp 2e.a on # ACPI irq 0x70 = 9 end device pnp 2e.b on # HW Monitor