Paul Menzel has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/38721 )
Change subject: Documentation: Mark up register names as code ......................................................................
Documentation: Mark up register names as code
Change-Id: I708385bca8edcd74b0d4c0a3ecc181b6ccd30c2b Signed-off-by: Paul Menzel pmenzel@molgen.mpg.de --- M Documentation/mainboard/lenovo/ivb_internal_flashing.md 1 file changed, 15 insertions(+), 15 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/21/38721/1
diff --git a/Documentation/mainboard/lenovo/ivb_internal_flashing.md b/Documentation/mainboard/lenovo/ivb_internal_flashing.md index 355cf98..e6b597b 100644 --- a/Documentation/mainboard/lenovo/ivb_internal_flashing.md +++ b/Documentation/mainboard/lenovo/ivb_internal_flashing.md @@ -5,9 +5,9 @@ Old versions of stock BIOS for these models have several security issues. In order to flash coreboot internally, two of them are of interest.
-**First** is the fact the SMM_BWP and BLE are not enabled in BIOS +**First** is the fact the `SMM_BWP` and `BLE` are not enabled in BIOS versions released before 2014. We have tested many versions on T430 and -X230 and found out that SMM_BWP=1 only since the update, the changelog +X230 and found out that `SMM_BWP=1` only since the update, the changelog of which contains following line:
(New) Improved the UEFI BIOS security feature.
@@ -159,14 +159,14 @@ Configuration Registers. When set to 1, PR0-PR4 registers cannot be written. Once set to 1, cannot be changed anymore.
-To be able to flash, we need SMM_BWP=0, BIOSWE=1, BLE=0, FLOCKDN=0 or +To be able to flash, we need `SMM_BWP=0`, `BIOSWE=1`, `BLE=0`, `FLOCKDN=0` or SPI protected ranges (PRx) to have a WP bit set to 0.
-Let's see what we have. Examine HSFS register: +Let's see what we have. Examine `HSFS` register:
sudo chipsec_main -m chipsec.modules.common.spi_lock
-You should see that FLOCKDN=1: +You should see that `FLOCKDN=1`:
[x][ ======================================================================= [x][ Module: SPI Flash Controller Configuration Locks @@ -181,11 +181,11 @@ [14] FDV = 1 << Flash Descriptor Valid [15] FLOCKDN = 1 << Flash Configuration Lock-Down
-Then check BIOS_CNTL and PR0-PR4: +Then check `BIOS_CNTL` and PR0-PR4:
sudo chipsec_main -m common.bios_wp
-Good news: on old BIOS versions, SMM_BWP=0 and BLE=0. +Good news: on old BIOS versions, `SMM_BWP=0` and `BLE=0`.
Bad news: there are 4 write protected SPI ranges:
@@ -215,8 +215,8 @@
sudo chipsec_util mmio dump SPIBAR
-You will see SPIBAR address (0xFED1F800) and registers (for example, -00000004 is HSFS): +You will see `SPIBAR` address (0xFED1F800) and registers (for example, +`00000004` is `HSFS`):
[mmio] MMIO register range [0x00000000FED1F800:0x00000000FED1F800+00000200]: +00000000: 0BFF0500 @@ -224,11 +224,11 @@ ...
As you can see, the only thing we need is to unset WP bit on PR0-PR4. -But that cannot be done once FLOCKDN is set to 1. +But that cannot be done once `FLOCKDN` is set to 1.
Now the fun part!
-FLOCKDN may only be cleared by a hardware reset, which includes S3 +`FLOCKDN` may only be cleared by a hardware reset, which includes S3 state. On S3 resume boot path, the chipset configuration has to be restored and it's done by executing so-called S3 Boot Scripts. You can dump these scripts by executing: @@ -236,7 +236,7 @@ sudo chipsec_util uefi s3bootscript
There are many entries. Along them, you can find instructions to write -to HSFS (remember, we know that SPIBAR is 0xFED1F800): +to `HSFS` (remember, we know that `SPIBAR` is 0xFED1F800):
Entry at offset 0x2B8F (len = 0x17, header len = 0x0): Data: @@ -251,7 +251,7 @@
These scripts are stored in memory. The vulnerability is that we can overwrite this memory, change these instructions and they will be -executed on S3 resume. Once we patch that instruction to not set FLOCKDN +executed on S3 resume. Once we patch that instruction to not set `FLOCKDN` bit, we will be able to write to PR0-PR4 registers.
## Creating a backup @@ -274,7 +274,7 @@
## Removing protections (practice)
-The original boot script writes 0xE009 to HSFS. FLOCKDN is 15th bit, so +The original boot script writes 0xE009 to `HSFS`. `FLOCKDN` is 15th bit, so let's write 0x6009 instead:
sudo chipsec_main -m tools.uefi.s3script_modify -a replace_op,mmio_wr,0xFED1F804,0x6009,0x2 @@ -297,7 +297,7 @@ [*] After sleep/resume, check the value of register 0xFED1F804 is 0x6009 [+] PASSED: The script has been modified. Go to sleep..
-Now go to S3, then resume and check FLOCKDN. It should be 0: +Now go to S3, then resume and check `FLOCKDN`. It should be 0:
sudo chipsec_main -m chipsec.modules.common.spi_lock