[coreboot-gerrit] Change in coreboot[master]: mainboard/volteer: Update Aux settings for Port 0

[Caveh Jalali (Code Review)]

Caveh Jalali has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/40245 )

Change subject: mainboard/volteer: Update Aux settings for Port 0
......................................................................

Patch Set 5:

(1 comment)

https://review.coreboot.org/c/coreboot/+/40245/5/src/mainboard/google/voltee... 
File src/mainboard/google/volteer/variants/baseboard/gpio.c:

https://review.coreboot.org/c/coreboot/+/40245/5/src/mainboard/google/voltee... 
PS5, Line 242: /* E22 : DDPA_CTRLCLK ==> USB_C1_AUXP_DC: Retimer FW drives this pin */
             : 	PAD_NC(GPP_E22, NONE),
             : 	/* E23 : DDPA_CTRLDATA ==> USB_C1_AUXN_DC: Retimer FW drives this pin */
             : 	PAD_NC(GPP_E23, NONE),
don't these need to be NF6 as well?
the only difference from C0 is that high/low settings don't
change with cable orientation because the retimer takes care
of the orientation for AUX/SBU lanes.