[coreboot-gerrit] Patch merged into coreboot/master: fad3703 rambi: configure SD card signals

the following patch was just integrated into master:
commit fad3703ce80011ccc0eaef03fb0575f591085d5f
Author: Aaron Durbin 
Date:   Thu Dec 5 12:40:08 2013 -0600

rambi: configure SD card signals

Rambi 1.5 boards use the native SD card controller on baytrail.
    Therefore, enable those signals. The CLK, D*, and CMD pins use
    2K pulls as these were shown to not exhibit any errors when
    doing reads or writes to a DDR50 sd card.

Note that if a servo is connected on needs to enable the
    sd_vref_sel rail to pp1800 as this causes issues with card
    detect if it is not set to pp1800.

BUG=chrome-os-partner:24312
    BRANCH=None
    TEST=Built and booted. Tested sd card read and write works in kernel.
         Also noted that write protect detection works as well.

Change-Id: I520e2808acbd8494534fcb710411dbc0e12fc874
    Signed-off-by: Aaron Durbin 
    Reviewed-on: https://chromium-review.googlesource.com/178961
    Reviewed-by: Shawn Nematbakhsh 
    Reviewed-on: http://review.coreboot.org/4990
    Reviewed-by: Kyösti Mälkki 
    Tested-by: build bot (Jenkins)

See http://review.coreboot.org/4990 for details.

-gerrit