Attention is currently required from: Jason Glenesk, Furquan Shaikh, Martin Roth, Marshall Dawson, Felix Held. Hello build bot (Jenkins), Raul Rangel, Martin Roth, Furquan Shaikh,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/55149
to look at the new patch set (#2).
Change subject: mb/google/guybrush: Override I2C3 pad configuration ......................................................................
mb/google/guybrush: Override I2C3 pad configuration
I2C bus to Google Security Chip (GSC) should be at 1.8V level. By default, all the I2C buses are initialized to operate at 3.3 V. Override the I2C3 pad control configuration.
BUG=b:188538373 TEST=Build and boot to OS in Guybrush. Ensure that the communication with GSC is fine.
Change-Id: I595a64736fdac0274abffb68c5e521302275b845 Signed-off-by: Karthikeyan Ramasubramanian kramasub@google.com --- M src/mainboard/amd/majolica/devicetree.cb M src/mainboard/google/guybrush/variants/baseboard/devicetree.cb M src/soc/amd/cezanne/chip.h M src/soc/amd/cezanne/i2c.c 4 files changed, 17 insertions(+), 1 deletion(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/49/55149/2