Hello build bot (Jenkins), Patrick Georgi, Bingbu Cao, Wonkyu Kim, Caveh Jalali, Duncan Laurie, Paul Menzel, Furquan Shaikh, Aaron Durbin,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/45160
to look at the new patch set (#5).
Change subject: mb/google/volteer: Add "i2c-allow-low-power-probe" property for cameras ......................................................................
mb/google/volteer: Add "i2c-allow-low-power-probe" property for cameras
There is a patch https://lkml.org/lkml/2020/9/3/235 which allows i2c device can support driver probe without power up the device. In order to support this, need add coreboot add "i2c-allow-low-power-probe" property.
BUG=b:169058784 BRANCH=none TEST=Build and boot volteer board. Monitor camera privacy LED and check it blinks. It should not blink.
Signed-off-by: Daniel Kang daniel.h.kang@intel.com Change-Id: I46f90ff8d412b18c7ee4bd7f22f9a7db771eb84f --- M src/mainboard/google/volteer/variants/baseboard/include/baseboard/acpi/mipi_camera.asl 1 file changed, 27 insertions(+), 7 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/60/45160/5