Edward O'Callaghan (eocallaghan@alterapraxis.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5500
-gerrit
commit f1b2e20afc96e8f389e1c09a35d8ff6bfc3a83be Author: Edward O'Callaghan eocallaghan@alterapraxis.com Date: Sun Apr 13 22:31:08 2014 +1000
mainboard/jetway/nf81-t56n-lf: Init SIO HWM multi-func regs
The Fintek F71869AD found on this board needs special "Multifunction registers" to be tweaked before it will control the CPU fan properly.
Change-Id: I0b93c878b532bfa39b9ceb10ce6bada079408b6b Signed-off-by: Edward O'Callaghan eocallaghan@alterapraxis.com --- src/mainboard/jetway/nf81-t56n-lf/Makefile.inc | 4 +- src/mainboard/jetway/nf81-t56n-lf/romstage.c | 7 ++ src/mainboard/jetway/nf81-t56n-lf/superio_hwm.c | 136 ++++++++++++++++++++++++ src/mainboard/jetway/nf81-t56n-lf/superio_hwm.h | 29 +++++ 4 files changed, 174 insertions(+), 2 deletions(-)
diff --git a/src/mainboard/jetway/nf81-t56n-lf/Makefile.inc b/src/mainboard/jetway/nf81-t56n-lf/Makefile.inc index e1f18a9..2e9bd0c 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/Makefile.inc +++ b/src/mainboard/jetway/nf81-t56n-lf/Makefile.inc @@ -29,9 +29,9 @@ romstage-y += agesawrapper.c romstage-y += BiosCallOuts.c romstage-y += PlatformGnbPcie.c
+romstage-y += superio_hwm.c + ramstage-y += buildOpts.c ramstage-y += agesawrapper.c ramstage-y += BiosCallOuts.c ramstage-y += PlatformGnbPcie.c - - diff --git a/src/mainboard/jetway/nf81-t56n-lf/romstage.c b/src/mainboard/jetway/nf81-t56n-lf/romstage.c index 846d5c7..6fff368 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/romstage.c +++ b/src/mainboard/jetway/nf81-t56n-lf/romstage.c @@ -19,6 +19,7 @@ */
#include "agesawrapper.h" +#include "superio_hwm.h"
#include <arch/cpu.h> #include <arch/io.h> @@ -52,6 +53,9 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx); /* Ensure Super I/O config address (i.e., 0x2e or 0x4e) matches that of devicetree.cb */ #define SERIAL_DEV PNP_DEV(0x2e, F71869AD_SP1)
+#define HWM_DEV PNP_DEV(0x2e, F71869AD_HWM) +#define HWM_BASE_ADDR 0x225 + void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { u32 val; @@ -79,6 +83,9 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) console_init(); }
+ /* Fintek F71869AD Hardware Monitor needs special configuration */ + superio_enable_hwm(HWM_DEV, HWM_BASE_ADDR); + /* Halt if there was a built in self test failure */ post_code(0x34); report_bist_failure(bist); diff --git a/src/mainboard/jetway/nf81-t56n-lf/superio_hwm.c b/src/mainboard/jetway/nf81-t56n-lf/superio_hwm.c new file mode 100644 index 0000000..0980fcb --- /dev/null +++ b/src/mainboard/jetway/nf81-t56n-lf/superio_hwm.c @@ -0,0 +1,136 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Just enough of a driver to make coreboot control system fans. + * No configuration is necessary for the OS to pick up the device. + */ + +#include <console/console.h> +#include <stdlib.h> +#include <stdint.h> +#include <arch/io.h> +#include <device/device.h> +#include <device/pnp.h> + +#include "superio_hwm.h" + +#define DEBUG_SUPERIO_HWM 0 + +/* Enable configuration: pass entry key '0x87' into index port dev. */ +static void pnp_enter_conf_state(device_t dev) +{ + u16 port = dev >> 8; + outb(0x87, port); + outb(0x87, port); +} + +/* Disable configuration: pass exit key '0xAA' into index port dev. */ +static void pnp_exit_conf_state(device_t dev) +{ + u16 port = dev >> 8; + outb(0xaa, port); +} + +/* TODO: + * replace with pnp_read/write_config() and make devicetree.cb configurable. + */ +static void write_index(u16 port, u8 reg, u8 value) +{ + outb(reg, port); + outb(value, port + 1); +} + +static u8 read_index(u16 port, u8 reg) +{ + outb(reg, port); + return inb(port + 1); +} +/* .. */ + +static void init_hwm_registers(u16 base, u8 * hwm_reg_values, int size) +{ + u8 reg, value; + int i; + + for (i = 0; i < size; i += 3) { + reg = hwm_reg_values[i]; + value = read_index(base, reg); + value &= 0xff & hwm_reg_values[i + 1]; + value |= 0xff & hwm_reg_values[i + 2]; + printk(BIOS_SPEW, "Super I/O HWM: base = 0x%04x, reg = 0x%02x, " + "value = 0x%02x\n", base, reg, value); + write_index(base, reg, value); + +#if DEBUG_SUPERIO_HWM == 1 + value = read_index(base, reg); + printk(BIOS_DEBUG, "Super I/O HWM (read back): base = 0x%04x, reg = 0x%02x, " + "value = 0x%02x\n", base, reg, value); +#endif /* DEBUG_SUPERIO_HWM */ + } +} + +/* Initialize F71869AD hardware monitor registers, usually at 0x225. */ +void superio_enable_hwm(device_t dev, u16 iobase) +{ + printk(BIOS_INFO, "Super I/O HWM: Initializing Hardware Monitor..\n"); + printk(BIOS_DEBUG, "Super I/O HWM: Base Address at 0x%x\n", iobase); + + pnp_enter_conf_state(dev); + pnp_set_logical_device(dev); + pnp_set_iobase(dev, PNP_IDX_IO0, iobase); + + /* Fintek F71869AD AMD mode HWM (ordered) programming sequence. */ + u8 hwm_reg_values[] = { + /* reg mask data */ + 0x08, 0x00, 0x98, /* SMBus Address p.53 */ + 0x0a, 0x00, 0x02, /* Configure pins 57/58 as PECI_REQ#/PECI (AMD_TSI) p.54 */ + /* Tfan1 = Tnow + (Ta - Tb)*Ct where, */ + 0xaf, 0x00, 0x8c, /* FAN1_TEMP_SEL_DIG, FAN1_TEMP_SEL (Tnow) set to come from CR7Ah p.73 */ + 0x9f, 0x00, 0x8a, /* set FAN_PROG_SEL = 1 */ + 0x94, 0x00, 0x00, /* FAN1_BASE_TEMP (Tb) set when FAN_PROG_SEL=1, p.64-65 */ + 0x96, 0x00, 0x07, /* set TFAN1_ADJ_SEL (Ta) p.67 to use CR7Ah p.61 */ + 0x95, 0x00, 0x33, /* TFAN1_ADJ_{UP,DOWN}_RATE (Ct=1/4 up & down) in 0x95 when FAN_PROG_SEL = 1, p.88 */ + 0x9f, 0x00, 0x0a, /* set FAN_PROG_SEL = 0 */ + /* .. */ + 0x02, 0x00, 0x30, /* OVT_MODE p.52 */ + 0x60, 0x00, 0x22, /* Temperature PME# Enable Register p.79 */ + 0x63, 0x00, 0x20, /* Temperature BEEP Enable Register p.58 */ + 0x64, 0x00, 0x22, /* T1 OVT and High Limit Temperature Select Register p.82 */ + 0x66, 0x00, 0x22, /* OVT and Alert Output Enable Register 1 p.59 */ + 0x82, 0x00, 0x76, /* Temperature sensors 1 OVT limit p.61 */ + 0x91, 0x00, 0x07, /* FAN Interrupt Status Register p.63 */ + 0x90, 0x00, 0x02, /* FAN PME# Enable Register p.85 */ + 0xa3, 0x00, 0x0e, /* FAN1 RPM mode p.70 */ + 0xa9, 0x00, 0x14, /* VT1 Boundary 2 Temperature p.71 */ + 0xaa, 0x00, 0xff, /* FAN1 Segment 1 Speed Count */ + 0xab, 0x00, 0x0e, /* FAN1 Segment 2 Speed Count */ + 0xae, 0x00, 0x07, /* FAN1 Segment 3 Speed Count */ + /* .. */ + 0xee, 0x00, 0x01, /* SMB_Status p.83 */ + 0xed, 0x00, 0x01, /* SMB/TSI Command Byte p.83 */ + 0xef, 0x00, 0x82, /* SMB_Protocal p.83 */ + }; + + printk(BIOS_DEBUG, "Super I/O HWM: Configuring registers...\n"); + init_hwm_registers(iobase, hwm_reg_values, ARRAY_SIZE(hwm_reg_values)); + + pnp_exit_conf_state(dev); +} diff --git a/src/mainboard/jetway/nf81-t56n-lf/superio_hwm.h b/src/mainboard/jetway/nf81-t56n-lf/superio_hwm.h new file mode 100644 index 0000000..1d862f0 --- /dev/null +++ b/src/mainboard/jetway/nf81-t56n-lf/superio_hwm.h @@ -0,0 +1,29 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef SUPERIO_HWM_H +#define SUPERIO_HWM_H + +#include <arch/io.h> + +/* Initialize F71869AD hardware monitor registers, usually at 0x225. */ +void superio_enable_hwm(device_t, u16); + +#endif /* SUPERIO_HWM_H */