[coreboot-gerrit] [S] Change in coreboot[main]: mb/google/nissa/var/quandiso: Add ALC1019 amp support

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/77754?usp=email )

Change subject: mb/google/nissa/var/quandiso: Add ALC1019 amp support
......................................................................

mb/google/nissa/var/quandiso: Add ALC1019 amp support

BUG=b:300573763
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot

Change-Id: Iff8167695c302f7b58976516d651a81f1a429bee
Signed-off-by: Robert Chen 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77754
Tested-by: build bot (Jenkins) 
Reviewed-by: Shawn Ku 
Reviewed-by: Subrata Banik 
Reviewed-by: Eric Lai 
---
M src/mainboard/google/brya/variants/quandiso/overridetree.cb
1 file changed, 14 insertions(+), 1 deletion(-)

Approvals:
  Shawn Ku: Looks good to me, but someone else must approve
  Subrata Banik: Looks good to me, approved
  build bot (Jenkins): Verified
  Eric Lai: Looks good to me, approved

diff --git a/src/mainboard/google/brya/variants/quandiso/overridetree.cb b/src/mainboard/google/brya/variants/quandiso/overridetree.cb
index 0b672ff..63fb2f7 100644
--- a/src/mainboard/google/brya/variants/quandiso/overridetree.cb
+++ b/src/mainboard/google/brya/variants/quandiso/overridetree.cb
@@ -30,6 +30,10 @@
    	option INTEL_QUANDISO360_WIFI	3
    	option UNUSED			15
    end
+	field AUDIO_AMP 20 21
+		option MAX98360A		0
+		option ALC1019			1
+	end
 end

chip soc/intel/alderlake
@@ -346,6 +350,13 @@
    			register "property_list[0].integer" = "1"
    			device i2c 1a on end
    		end
+			chip drivers/generic/alc1015
+				register "hid" = ""RTL1019""
+				register "sdb" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
+				device generic 0 on
+					probe AUDIO_AMP ALC1019
+				end
+			end
    	end
    	device ref i2c5 on
    		chip drivers/i2c/generic
@@ -372,7 +383,9 @@
    			register "hid" = ""MX98360A""
    			register "sdmode_gpio" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
    			register "sdmode_delay" = "5"
-				device generic 0 on end
+				device generic 0 on
+					probe AUDIO_AMP MAX98360A
+				end
    		end
    	end
    	device ref pcie_rp4 on