Matt DeVillier has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/40915 )
Change subject: mb/purism/librem_bdw: Convert to use override devicetree ......................................................................
mb/purism/librem_bdw: Convert to use override devicetree
Since the variants' devicetrees are almost identical, convert to using an overridetree setup for simplicity.
Signed-off-by: Matt DeVillier matt.devillier@puri.sm Change-Id: I07fb5a09e578bf299081b26e010317385a6c5f7f --- M src/mainboard/purism/librem_bdw/Kconfig R src/mainboard/purism/librem_bdw/devicetree.cb D src/mainboard/purism/librem_bdw/variants/librem13v1/devicetree.cb A src/mainboard/purism/librem_bdw/variants/librem13v1/overridetree.cb A src/mainboard/purism/librem_bdw/variants/librem15v2/overridetree.cb 5 files changed, 31 insertions(+), 83 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/15/40915/1
diff --git a/src/mainboard/purism/librem_bdw/Kconfig b/src/mainboard/purism/librem_bdw/Kconfig index 7a8bc22..1f17f75 100644 --- a/src/mainboard/purism/librem_bdw/Kconfig +++ b/src/mainboard/purism/librem_bdw/Kconfig @@ -17,9 +17,9 @@ default "librem13v1" if BOARD_PURISM_LIBREM13_V1 default "librem15v2" if BOARD_PURISM_LIBREM15_V2
-config DEVICETREE +config OVERRIDE_DEVICETREE string - default "variants/$(CONFIG_VARIANT_DIR)/devicetree.cb" + default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb"
config DRIVERS_PS2_KEYBOARD def_bool y diff --git a/src/mainboard/purism/librem_bdw/variants/librem15v2/devicetree.cb b/src/mainboard/purism/librem_bdw/devicetree.cb similarity index 90% rename from src/mainboard/purism/librem_bdw/variants/librem15v2/devicetree.cb rename to src/mainboard/purism/librem_bdw/devicetree.cb index cbd59be..13b9e5e 100644 --- a/src/mainboard/purism/librem_bdw/variants/librem15v2/devicetree.cb +++ b/src/mainboard/purism/librem_bdw/devicetree.cb @@ -21,14 +21,6 @@ register "gen1_dec" = "0x00000381" register "gen2_dec" = "0x000c0081"
- # Port 0 is HDD - # Port 1 is M.2 NGFF - register "sata_port_map" = "0x3" - - # Port tuning for link stability - register "sata_port0_gen3_dtle" = "7" - register "sata_port1_gen3_dtle" = "9" - device cpu_cluster 0 on device lapic 0 on end end @@ -58,7 +50,7 @@ device pci 1c.3 on end # PCIe Port #4 - WiFi device pci 1c.4 on end # PCIe Port #5 device pci 1c.5 on end # PCIe Port #6 - M.2 NVMe - device pci 1d.0 on end # USB2 EHCI + device pci 1d.0 off end # USB2 EHCI device pci 1e.0 off end # PCI bridge device pci 1f.0 on chip ec/purism/librem diff --git a/src/mainboard/purism/librem_bdw/variants/librem13v1/devicetree.cb b/src/mainboard/purism/librem_bdw/variants/librem13v1/devicetree.cb deleted file mode 100644 index 98b5163..0000000 --- a/src/mainboard/purism/librem_bdw/variants/librem13v1/devicetree.cb +++ /dev/null @@ -1,72 +0,0 @@ -chip soc/intel/broadwell - - # Enable eDP Hotplug with 6ms pulse - register "gpu_dp_d_hotplug" = "0x06" - - # Enable DDI1 Hotplug with 6ms pulse - register "gpu_dp_b_hotplug" = "0x06" - - # Set backlight PWM value for eDP - register "gpu_pch_backlight_pwm_hz" = "200" - - # Enable Panel and configure power delays - register "gpu_panel_port_select" = "1" # eDP - register "gpu_panel_power_cycle_delay" = "6" # 500ms - register "gpu_panel_power_up_delay" = "2000" # 200ms - register "gpu_panel_power_down_delay" = "500" # 50ms - register "gpu_panel_power_backlight_on_delay" = "2000" # 200ms - register "gpu_panel_power_backlight_off_delay" = "2000" # 200ms - - # EC host command ranges are in 0x380-0x383 & 0x80-0x8f - register "gen1_dec" = "0x00000381" - register "gen2_dec" = "0x000c0081" - - # Port 0 is HDD - # Port 3 is M.2 NGFF - register "sata_port_map" = "0x9" - - # Port 0 tuning for link stability - register "sata_port0_gen3_dtle" = "9" - register "sata_port3_gen3_dtle" = "9" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # host bridge - device pci 02.0 on end # vga controller - device pci 03.0 on end # mini-hd audio - device pci 13.0 off end # Smart Sound Audio DSP - device pci 14.0 on end # USB3 XHCI - device pci 15.0 off end # Serial I/O DMA - device pci 15.1 off end # I2C0 - device pci 15.2 off end # I2C1 - device pci 15.3 off end # GSPI0 - device pci 15.4 off end # GSPI1 - device pci 15.5 off end # UART0 - device pci 15.6 off end # UART1 - device pci 16.0 off end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT - device pci 17.0 off end # SDIO - device pci 19.0 off end # GbE - device pci 1b.0 on end # High Definition Audio - device pci 1c.0 on end # PCIe Port #1 - device pci 1c.1 off end # PCIe Port #2 - device pci 1c.2 on end # PCIe Port #3 - LAN - device pci 1c.3 on end # PCIe Port #4 - WiFi - device pci 1c.4 on end # PCIe Port #5 - device pci 1c.5 on end # PCIe Port #6 - M.2 NVMe - device pci 1d.0 off end # USB2 EHCI - device pci 1e.0 off end # PCI bridge - device pci 1f.0 on - chip ec/purism/librem - device pnp 0c09.0 on end - end - end # LPC bridge - device pci 1f.2 on end # SATA Controller - device pci 1f.3 on end # SMBus - device pci 1f.6 off end # Thermal - end -end diff --git a/src/mainboard/purism/librem_bdw/variants/librem13v1/overridetree.cb b/src/mainboard/purism/librem_bdw/variants/librem13v1/overridetree.cb new file mode 100644 index 0000000..d3d0ae7 --- /dev/null +++ b/src/mainboard/purism/librem_bdw/variants/librem13v1/overridetree.cb @@ -0,0 +1,14 @@ +chip soc/intel/broadwell + + # Port 0 is HDD + # Port 3 is M.2 NGFF + register "sata_port_map" = "0x9" + + # Port tuning for link stability + register "sata_port0_gen3_dtle" = "9" + register "sata_port3_gen3_dtle" = "9" + + device domain 0 on + device pci 1c.2 on end # PCIe Port #3 - LAN + end +end diff --git a/src/mainboard/purism/librem_bdw/variants/librem15v2/overridetree.cb b/src/mainboard/purism/librem_bdw/variants/librem15v2/overridetree.cb new file mode 100644 index 0000000..c0c8d03 --- /dev/null +++ b/src/mainboard/purism/librem_bdw/variants/librem15v2/overridetree.cb @@ -0,0 +1,14 @@ +chip soc/intel/broadwell + + # Port 0 is HDD + # Port 1 is M.2 NGFF + register "sata_port_map" = "0x3" + + # Port tuning for link stability + register "sata_port0_gen3_dtle" = "7" + register "sata_port1_gen3_dtle" = "9" + + device domain 0 on + device pci 1d.0 on end # USB2 EHCI + end +end