[coreboot-gerrit] [S] Change in coreboot[main]: superio/fintek/f81866d: Fix HWM port address

[Maxim Polyakov (Code Review)]

Attention is currently required from: Harrie Paijmans, Paul Menzel.

Hello Angel Pons, Felix Held, Harrie Paijmans, build bot (Jenkins),

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/87273?usp=email

to look at the new patch set (#3).

Change subject: superio/fintek/f81866d: Fix HWM port address
......................................................................

superio/fintek/f81866d: Fix HWM port address

The HWM port is +5 to the base address stored in LDN 0x4 at index
0x60/0x61. Take this rule into account when configuring the monitor,
as it was done for Fintek SIO chips in the superiotool utility [1].

[1] commit d92745b

TEST=Run coreboot on the motherboard with the Fintek A81966 chip (which
is architecturally compatible) with pnp_write_hwm5_index() in the HWM
initialization code:
- the fans are regulated correctly;
- superiotool prints the values of the configuration registers updated
  during initialization.

Change-Id: If39400e56a7d0792a5bc8f312c29dd5e98a0b2d3
Signed-off-by: Maxim Polyakov 
---
M src/superio/fintek/f81866d/f81866d_hwm.c
1 file changed, 16 insertions(+), 16 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/73/87273/3