Alexandru Gagniuc (mr.nuke.me@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5409
-gerrit
commit cef762ecc0b26a71d0eb0a27e34fbd88f81cae36 Author: Alexandru Gagniuc mr.nuke.me@gmail.com Date: Wed Mar 26 18:51:08 2014 -0500
mainboard/hp: Add initial support for Pavilion m6-1035dx
This was a pathetically easy port, where all the components are already supported. This is basically a verbatim copy of amd/parmer. The EC is an ENE KB932, which is a part that does surprisingly little for an EC. This also means we need almost no code to get it working. I've "select"ed the EC in Kconfig, which is the only difference from parmer, although the keyboard worked fine without it.
I haven't coupled in the ACPI code from the EC yet, so battery level is not readable from the OS. Hotkeys work except for brightness control, and the CapsLock LED blinks at regular intervals instead of following the CapsLock key.
Change-Id: Idfec6f848b99a52e73eac22d516f3550477ad822 Signed-off-by: Alexandru Gagniuc mr.nuke.me@gmail.com --- src/mainboard/hp/Kconfig | 4 + src/mainboard/hp/pavilion_m6_1035dx/BiosCallOuts.c | 245 +++++++ src/mainboard/hp/pavilion_m6_1035dx/BiosCallOuts.h | 31 + src/mainboard/hp/pavilion_m6_1035dx/Kconfig | 99 +++ src/mainboard/hp/pavilion_m6_1035dx/Makefile.inc | 28 + src/mainboard/hp/pavilion_m6_1035dx/OptionsIds.h | 67 ++ .../hp/pavilion_m6_1035dx/PlatformGnbPcie.c | 201 ++++++ .../hp/pavilion_m6_1035dx/PlatformGnbPcieComplex.h | 32 + .../hp/pavilion_m6_1035dx/acpi/AmdImc.asl | 97 +++ src/mainboard/hp/pavilion_m6_1035dx/acpi/gpe.asl | 79 +++ src/mainboard/hp/pavilion_m6_1035dx/acpi/ide.asl | 20 + .../hp/pavilion_m6_1035dx/acpi/mainboard.asl | 43 ++ .../hp/pavilion_m6_1035dx/acpi/routing.asl | 324 +++++++++ src/mainboard/hp/pavilion_m6_1035dx/acpi/sata.asl | 20 + src/mainboard/hp/pavilion_m6_1035dx/acpi/si.asl | 28 + src/mainboard/hp/pavilion_m6_1035dx/acpi/sleep.asl | 103 +++ .../hp/pavilion_m6_1035dx/acpi/superio.asl | 20 + .../hp/pavilion_m6_1035dx/acpi/thermal.asl | 20 + .../hp/pavilion_m6_1035dx/acpi/usb_oc.asl | 31 + src/mainboard/hp/pavilion_m6_1035dx/acpi_tables.c | 329 ++++++++++ src/mainboard/hp/pavilion_m6_1035dx/agesawrapper.c | 721 +++++++++++++++++++++ src/mainboard/hp/pavilion_m6_1035dx/agesawrapper.h | 97 +++ src/mainboard/hp/pavilion_m6_1035dx/board_info.txt | 5 + src/mainboard/hp/pavilion_m6_1035dx/buildOpts.c | 499 ++++++++++++++ src/mainboard/hp/pavilion_m6_1035dx/cmos.layout | 114 ++++ src/mainboard/hp/pavilion_m6_1035dx/devicetree.cb | 90 +++ src/mainboard/hp/pavilion_m6_1035dx/dsdt.asl | 85 +++ src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c | 145 +++++ src/mainboard/hp/pavilion_m6_1035dx/irq_tables.c | 112 ++++ src/mainboard/hp/pavilion_m6_1035dx/mainboard.c | 51 ++ src/mainboard/hp/pavilion_m6_1035dx/mptable.c | 206 ++++++ src/mainboard/hp/pavilion_m6_1035dx/romstage.c | 157 +++++ 32 files changed, 4103 insertions(+)
diff --git a/src/mainboard/hp/Kconfig b/src/mainboard/hp/Kconfig index 9f59ec8..53125a3 100644 --- a/src/mainboard/hp/Kconfig +++ b/src/mainboard/hp/Kconfig @@ -11,6 +11,9 @@ config BOARD_HP_DL165_G6_FAM10 bool "ProLiant DL165 G6 Fam10" config BOARD_HP_E_VECTRA_P2706T bool "e-Vectra P2706T" +config BOARD_HP_PAVILION_M6_1035DX + bool "Pavilion m6 1034dx" +
endchoice
@@ -18,6 +21,7 @@ source "src/mainboard/hp/dl145_g1/Kconfig" source "src/mainboard/hp/dl145_g3/Kconfig" source "src/mainboard/hp/dl165_g6_fam10/Kconfig" source "src/mainboard/hp/e_vectra_p2706t/Kconfig" +source "src/mainboard/hp/pavilion_m6_1035dx/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/hp/pavilion_m6_1035dx/BiosCallOuts.c b/src/mainboard/hp/pavilion_m6_1035dx/BiosCallOuts.c new file mode 100644 index 0000000..110c2c8 --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/BiosCallOuts.c @@ -0,0 +1,245 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "agesawrapper.h" +#include "amdlib.h" +#include "BiosCallOuts.h" +#include "Ids.h" +#include "OptionsIds.h" +#include "heapManager.h" +#include "FchPlatform.h" +#include "cbfs.h" +#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) +#include "imc.h" +#endif + +STATIC CONST BIOS_CALLOUT_STRUCT BiosCallouts[] = +{ + {AGESA_ALLOCATE_BUFFER, fam15tn_AllocateBuffer }, + {AGESA_DEALLOCATE_BUFFER, fam15tn_DeallocateBuffer }, + {AGESA_DO_RESET, fam15tn_Reset }, + {AGESA_LOCATE_BUFFER, fam15tn_LocateBuffer }, + {AGESA_READ_SPD, fam15tn_ReadSpd }, + {AGESA_READ_SPD_RECOVERY, fam15tn_DefaultRet }, + {AGESA_RUNFUNC_ONAP, fam15tn_RunFuncOnAp }, + {AGESA_GET_IDS_INIT_DATA, fam15tn_GetIdsInitData }, + {AGESA_HOOKBEFORE_DQS_TRAINING, fam15tn_HookBeforeDQSTraining }, + {AGESA_HOOKBEFORE_EXIT_SELF_REF, fam15tn_HookBeforeExitSelfRefresh }, + {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config }, + {AGESA_GNB_GFX_GET_VBIOS_IMAGE, fam15tn_HookGfxGetVbiosImage } +}; + +AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + UINTN i; + AGESA_STATUS CalloutStatus; + UINTN CallOutCount = sizeof (BiosCallouts) / sizeof (BiosCallouts [0]); + + for (i = 0; i < CallOutCount; i++) + { + if (BiosCallouts[i].CalloutName == Func) + break; + } + + if(i >= CallOutCount) + return AGESA_UNSUPPORTED; + + CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr); + + return CalloutStatus; +} + +/** + * AMD Parmer Platform ALC272 Verb Table + */ +static const CODEC_ENTRY Parmer_Alc272_VerbTbl[] = { + {0x11, 0x411111F0}, + {0x12, 0x411111F0}, + {0x13, 0x411111F0}, + {0x14, 0x411111F0}, + {0x15, 0x411111F0}, + {0x16, 0x411111F0}, + {0x17, 0x411111F0}, + {0x18, 0x01a19840}, + {0x19, 0x411111F0}, + {0x1a, 0x01813030}, + {0x1b, 0x411111F0}, + {0x1d, 0x40130605}, + {0x1e, 0x01441120}, + {0x21, 0x01211010}, + {0xff, 0xffffffff} +}; + +static const CODEC_TBL_LIST CodecTableList[] = +{ + {0x10ec0272, (CODEC_ENTRY*)&Parmer_Alc272_VerbTbl[0]}, + {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} +}; + +#define FAN_INPUT_INTERNAL_DIODE 0 +#define FAN_INPUT_TEMP0 1 +#define FAN_INPUT_TEMP1 2 +#define FAN_INPUT_TEMP2 3 +#define FAN_INPUT_TEMP3 4 +#define FAN_INPUT_TEMP0_FILTER 5 +#define FAN_INPUT_ZERO 6 +#define FAN_INPUT_DISABLED 7 + +#define FAN_AUTOMODE (1 << 0) +#define FAN_LINEARMODE (1 << 1) +#define FAN_STEPMODE ~(1 << 1) +#define FAN_POLARITY_HIGH (1 << 2) +#define FAN_POLARITY_LOW ~(1 << 2) + +/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */ +#define FREQ_28KHZ 0x0 +#define FREQ_25KHZ 0x1 +#define FREQ_23KHZ 0x2 +#define FREQ_21KHZ 0x3 +#define FREQ_29KHZ 0x4 +#define FREQ_18KHZ 0x5 +#define FREQ_100HZ 0xF7 +#define FREQ_87HZ 0xF8 +#define FREQ_58HZ 0xF9 +#define FREQ_44HZ 0xFA +#define FREQ_35HZ 0xFB +#define FREQ_29HZ 0xFC +#define FREQ_22HZ 0xFD +#define FREQ_14HZ 0xFE +#define FREQ_11HZ 0xFF + +/* Parmer Hardware Monitor Fan Control + * Hardware limitation: + * HWM failed to read the input temperture vi I2C, + * if other software switch the I2C switch by mistake or intention. + * We recommend to using IMC to control Fans, instead of HWM. + */ +static void oem_fan_control(FCH_DATA_BLOCK *FchParams) +{ + /* Enable IMC fan control. the recommand way */ +#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) + + imc_reg_init(); + + /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */ + FchParams->Hwm.HwMonitorEnable = TRUE; + FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */ + + FchParams->Imc.ImcEnable = TRUE; + FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */ + FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */ + + LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader); + + /* Thermal Zone Parameter */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x0e;//6 | BIT3; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x54; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x02; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00; + + /* IMC Fan Policy temperature thresholds */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;///80; /*AC0 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00; + + /* IMC Fan Policy PWM Settings */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */ + + FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8; + + /* NOTE: + * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege, + * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it. + * so we remove it from AGESA code. Please Seee FchInitLateHwm. + */ + +#else /* HWM fan control, the way not recommand */ + FchParams->Imc.ImcEnable = FALSE; + FchParams->Hwm.HwMonitorEnable = TRUE; + FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */ + +#endif /* CONFIG_HUDSON_IMC_FWM */ +} + +/** + * Fch Oem setting callback + * + * Configure platform specific Hudson device, + * such Azalia, SATA, IMC etc. + */ +AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr) +{ + FCH_RESET_DATA_BLOCK *FchParams = (FCH_RESET_DATA_BLOCK *)FchData; + + if (FchParams->StdHeader->Func == AMD_INIT_RESET) { + FCH_RESET_DATA_BLOCK *FchParams_reset = (FCH_RESET_DATA_BLOCK *) FchData; + printk(BIOS_DEBUG, "Fch OEM config in INIT RESET "); + //FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */ +#if CONFIG_HUDSON_LEGACY_FREE + FchParams_reset->LegacyFree = 1; +#endif + } else if (FchParams->StdHeader->Func == AMD_INIT_ENV) { + FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData; + printk(BIOS_DEBUG, "Fch OEM config in INIT ENV "); + + /* Azalia Controller OEM Codec Table Pointer */ + FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]); + /* Azalia Controller Front Panel OEM Table Pointer */ + + /* Fan Control */ + oem_fan_control(FchParams_env); + + /* XHCI configuration */ +#if CONFIG_HUDSON_XHCI_ENABLE + FchParams_env->Usb.Xhci0Enable = TRUE; +#else + FchParams_env->Usb.Xhci0Enable = FALSE; +#endif + FchParams_env->Usb.Xhci1Enable = FALSE; + + /* sata configuration */ + } + printk(BIOS_DEBUG, "Done\n"); + + return AGESA_SUCCESS; +} diff --git a/src/mainboard/hp/pavilion_m6_1035dx/BiosCallOuts.h b/src/mainboard/hp/pavilion_m6_1035dx/BiosCallOuts.h new file mode 100644 index 0000000..9132fac --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/BiosCallOuts.h @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BIOS_CALLOUT_H_ +#define _BIOS_CALLOUT_H_ + +#include <northbridge/amd/agesa/family15tn/fam15tn_callouts.h> + +/* CALLOUT Initialization */ +AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr); + +/* FCH OEM Config*/ +AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr); + +#endif //_BIOS_CALLOUT_H_ diff --git a/src/mainboard/hp/pavilion_m6_1035dx/Kconfig b/src/mainboard/hp/pavilion_m6_1035dx/Kconfig new file mode 100644 index 0000000..ff9e7bb --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/Kconfig @@ -0,0 +1,99 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +if BOARD_HP_PAVILION_M6_1035DX + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select ARCH_X86 + select CPU_AMD_AGESA_FAMILY15_TN + select NORTHBRIDGE_AMD_AGESA_FAMILY15_TN + select SOUTHBRIDGE_AMD_AGESA_HUDSON + select EC_COMPAL_ENE932 + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select HAVE_ACPI_RESUME + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select LIFT_BSP_APIC_ID + select SERIAL_CPU_INIT + select AMDMCT + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_4096 + select GFXUMA + select UDELAY_LAPIC + select USBDEBUG_IN_ROMSTAGE + +config MAINBOARD_DIR + string + default hp/pavilion_m6_1035dx + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "Pavilion m6 1035dx" + +config HW_MEM_HOLE_SIZEK + hex + default 0x200000 + +config MAX_CPUS + int + default 4 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config IRQ_SLOT_COUNT + int + default 11 + +config RAMTOP + hex + default 0x1000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config RAMBASE + hex + default 0x200000 + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +config VGA_BIOS_ID + string + default "1002,9900" + +config HUDSON_LEGACY_FREE + bool + default y + +endif # BOARD_HP_PAVILION_M6_1035DX diff --git a/src/mainboard/hp/pavilion_m6_1035dx/Makefile.inc b/src/mainboard/hp/pavilion_m6_1035dx/Makefile.inc new file mode 100644 index 0000000..3103f70 --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/Makefile.inc @@ -0,0 +1,28 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +romstage-y += buildOpts.c +romstage-y += agesawrapper.c +romstage-y += BiosCallOuts.c +romstage-y += PlatformGnbPcie.c + +ramstage-y += buildOpts.c +ramstage-y += agesawrapper.c +ramstage-y += BiosCallOuts.c +ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/hp/pavilion_m6_1035dx/OptionsIds.h b/src/mainboard/hp/pavilion_m6_1035dx/OptionsIds.h new file mode 100644 index 0000000..e006441 --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/OptionsIds.h @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * IDS Option File + * + * This file is used to switch on/off IDS features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ + */ +#ifndef _OPTION_IDS_H_ +#define _OPTION_IDS_H_ + +/** + * + * This file generates the defaults tables for the Integrated Debug Support + * Module. The documented build options are imported from a user controlled + * file for processing. The build options for the Integrated Debug Support + * Module are listed below: + * + * IDSOPT_IDS_ENABLED + * IDSOPT_ERROR_TRAP_ENABLED + * IDSOPT_CONTROL_ENABLED + * IDSOPT_TRACING_ENABLED + * IDSOPT_PERF_ANALYSIS + * IDSOPT_ASSERT_ENABLED + * IDS_DEBUG_PORT + * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + * + **/ + +#define IDSOPT_IDS_ENABLED TRUE +//#define IDSOPT_CONTROL_ENABLED TRUE +//#define IDSOPT_TRACING_ENABLED TRUE +#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE +//#define IDSOPT_PERF_ANALYSIS TRUE +#define IDSOPT_ASSERT_ENABLED TRUE +//#undef IDSOPT_DEBUG_ENABLED +//#define IDSOPT_DEBUG_ENABLED FALSE +//#undef IDSOPT_HOST_SIMNOW +//#define IDSOPT_HOST_SIMNOW FALSE +//#undef IDSOPT_HOST_HDT +//#define IDSOPT_HOST_HDT FALSE +//#define IDS_DEBUG_PORT 0x80 + +#endif diff --git a/src/mainboard/hp/pavilion_m6_1035dx/PlatformGnbPcie.c b/src/mainboard/hp/pavilion_m6_1035dx/PlatformGnbPcie.c new file mode 100644 index 0000000..784f6d9 --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/PlatformGnbPcie.c @@ -0,0 +1,201 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "AGESA.h" +#include "amdlib.h" +#include "Ids.h" +#include "heapManager.h" +#include "PlatformGnbPcieComplex.h" +#include "Filecode.h" + +#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE + +/* + * Lane ID Mapping (from Fam15h BKDG: Table 45: Lane Id Mapping) + * + * Lane Id + * 0 P_UMI_[T,R]X[P,N]0 - southbridge link, connect via dev 8 + * 1 P_UMI_[T,R]X[P,N]1 - southbridge link, connect via dev 8 + * 2 P_UMI_[T,R]X[P,N]2 - southbridge link, connect via dev 8 + * 3 P_UMI_[T,R]X[P,N]3 - southbridge link, connect via dev 8 + * 4 P_GPP_[T,R]X[P,N]0 - may connect to PCI dev 4 - 7 + * 5 P_GPP_[T,R]X[P,N]1 - may connect to PCI dev 4 - 7 + * 6 P_GPP_[T,R]X[P,N]2 - may connect to PCI dev 4 - 7 + * 7 P_GPP_[T,R]X[P,N]3 - may connect to PCI dev 4 - 7 + * 8 P_GFX_[T,R]X[P,N]0 - may be used to form GFX slot or DDI + * 9 P_GFX_[T,R]X[P,N]1 - may be used to form GFX slot or DDI + * 10 P_GFX_[T,R]X[P,N]2 - may be used to form GFX slot or DDI + * 11 P_GFX_[T,R]X[P,N]3 - may be used to form GFX slot or DDI + * 12 P_GFX_[T,R]X[P,N]4 - may be used to form GFX slot or DDI + * 13 P_GFX_[T,R]X[P,N]5 - may be used to form GFX slot or DDI + * 14 P_GFX_[T,R]X[P,N]6 - may be used to form GFX slot or DDI + * 15 P_GFX_[T,R]X[P,N]7 - may be used to form GFX slot or DDI + * 16 P_GFX_[T,R]X[P,N]8 - may be used to form GFX slot or DDI + * 17 P_GFX_[T,R]X[P,N]9 - may be used to form GFX slot or DDI + * 18 P_GFX_[T,R]X[P,N]10 - may be used to form GFX slot or DDI + * 19 P_GFX_[T,R]X[P,N]11 - may be used to form GFX slot or DDI + * 20 P_GFX_[T,R]X[P,N]12 - may be used to form GFX slot or DDI + * 21 P_GFX_[T,R]X[P,N]13 - may be used to form GFX slot or DDI + * 22 P_GFX_[T,R]X[P,N]14 - may be used to form GFX slot or DDI + * 23 P_GFX_[T,R]X[P,N]15 - may be used to form GFX slot or DDI + * 24 DP0_TX[P,N]0 - rest is just for DDI (graphics outputs) + * 25 DP0_TX[P,N]1 + * 26 DP0_TX[P,N]2 + * 27 DP0_TX[P,N]3 + * 28 DP1_TX[P,N]0 + * 29 DP1_TX[P,N]1 + * 30 DP1_TX[P,N]2 + * 31 DP1_TX[P,N]3 + * 32 DP2_TX[P,N]0 + * 33 DP2_TX[P,N]1 + * 34 DP2_TX[P,N]2 + * 35 DP2_TX[P,N]3 + * 36 DP2_TX[P,N]4 + * 37 DP2_TX[P,N]5 + * 38 DP2_TX[P,N]6 + */ + +static const PCIe_PORT_DESCRIPTOR PortList [] = { + /* PCIe port, Lanes 8:23, PCI Device Number 2, PCIE SLOT0 x16 */ + { + 0, /* Descriptor flags */ + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 8, 23), + PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 2, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1) + }, + /* PCIe port, Lanes 16:23, PCI Device Number 3, Disabled */ + { + 0, /* Descriptor flags */ + PCIE_ENGINE_DATA_INITIALIZER (PcieUnusedEngine, 16, 23), + PCIE_PORT_DATA_INITIALIZER (PortDisabled, ChannelTypeExt6db, 3, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1) + }, + + /* PCIe port, Lanes 4, PCI Device Number 4, PCIE MINI0 */ + { + 0, /* Descriptor flags */ + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), + PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 4, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1) + }, + + /* PCIe port, Lanes 5, PCI Device Number 5, PCIE MINI1 */ + { + 0, /* Descriptor flags */ + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5), + PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 5, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1) + }, + + /* PCIe port, Lanes 6, PCI Device Number 6, PCIE SLOT1 x1 */ + { + 0, /* Descriptor flags */ + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6), + PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 6, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1) + }, + + /* PCIe port, Lanes 7, PCI Device Number 7, LAN */ + { + 0, /* Descriptor flags */ + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7), + PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 7, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1) + }, + + /* PCIe port, Lanes 0:3, PCI Device Number 8, Bridge to FCH */ + { + DESCRIPTOR_TERMINATE_LIST, /* Descriptor flags !!!IMPORTANT!!! Terminate last element of array */ + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3), + PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 8, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0) + }, +}; + +static const PCIe_DDI_DESCRIPTOR DdiList [] = { + /* DP0 to HDMI0/DP */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 24, 27), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1) + }, + /* DP1 to FCH */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 28, 31), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeNutmegDpToVga, Aux2, Hdp2) + }, + /* DP2 to HDMI1/DP */ + { + DESCRIPTOR_TERMINATE_LIST, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 32, 35), + /* PCIE_DDI_DATA_INITIALIZER (ConnectorTypeEDP, Aux3, Hdp3) */ + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux3, Hdp3) + }, +}; + +/*---------------------------------------------------------------------------------------*/ +/** + * OemCustomizeInitEarly + * + * Description: + * This stub function will call the host environment through the binary block + * interface (call-out port) to provide a user hook opportunity + * + * Parameters: + * @param[in] **PeiServices + * @param[in] *InitEarly + * + * @retval VOID + * + **/ +/*---------------------------------------------------------------------------------------*/ +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ) +{ + AGESA_STATUS Status; + PCIe_COMPLEX_DESCRIPTOR *PcieComplexListPtr; + + ALLOCATE_HEAP_PARAMS AllocHeapParams; + + /* GNB PCIe topology Porting */ + + /* */ + /* Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR */ + /* */ + AllocHeapParams.RequestedBufferSize = sizeof(PCIe_COMPLEX_DESCRIPTOR); + + AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; + AllocHeapParams.Persist = HEAP_LOCAL_CACHE; + Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); + if ( Status!= AGESA_SUCCESS) { + /* Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR */ + ASSERT(FALSE); + return; + } + + PcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; + + LibAmdMemFill (PcieComplexListPtr, + 0, + sizeof(PCIe_COMPLEX_DESCRIPTOR), + &InitEarly->StdHeader); + + PcieComplexListPtr->Flags = DESCRIPTOR_TERMINATE_LIST; + PcieComplexListPtr->SocketId = 0; + PcieComplexListPtr->PciePortList = PortList; + PcieComplexListPtr->DdiLinkList = DdiList; + + InitEarly->GnbConfig.PcieComplexList = PcieComplexListPtr; +} diff --git a/src/mainboard/hp/pavilion_m6_1035dx/PlatformGnbPcieComplex.h b/src/mainboard/hp/pavilion_m6_1035dx/PlatformGnbPcieComplex.h new file mode 100644 index 0000000..b3c69cf --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/PlatformGnbPcieComplex.h @@ -0,0 +1,32 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H +#define _PLATFORM_GNB_PCIE_COMPLEX_H + +#include "Porting.h" +#include "AGESA.h" +#include "amdlib.h" + +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ); + +#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/hp/pavilion_m6_1035dx/acpi/AmdImc.asl b/src/mainboard/hp/pavilion_m6_1035dx/acpi/AmdImc.asl new file mode 100644 index 0000000..f55a12a --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/acpi/AmdImc.asl @@ -0,0 +1,97 @@ +//BTDC Due to IMC Fan, ACPI control codes +OperationRegion(IMIO, SystemIO, 0x3E, 0x02) +Field(IMIO , ByteAcc, NoLock, Preserve) { + IMCX,8, + IMCA,8 +} + +IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) { + Offset(0x80), + MSTI, 8, + MITS, 8, + MRG0, 8, + MRG1, 8, + MRG2, 8, + MRG3, 8, +} + +Method(WACK, 0) +{ + Store(0, Local0) + Store(50, Local1) + While (LAnd (LNotEqual(Local0, 0xFA), LGreater(Local1,0))) { + Store(MRG0, Local0) + Sleep(10) + Decrement(Local1) + } +} + +//Init +Method (ITZE, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(0, MRG1) + Store(0, MRG2) + Store(0x80, MSTI) + WACK() + + Or(MRG2, 0x01, Local0) + + Store(0, MRG0) + Store(0, MRG1) + Store(Local0, MRG2) + Store(0x81, MSTI) + WACK() +} + +//Sleep +Method (IMSP, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(1, MRG1) + Store(0, MRG2) + Store(0x98, MSTI) + WACK() + + Store(0, MRG0) + Store(0xB4, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() +} + +//Wake +Method (IMWK, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(0, MRG1) + Store(0, MRG2) + Store(0x80, MSTI) + WACK() + + Or(MRG2, 0x01, Local0) + + Store(0, MRG0) + Store(0, MRG1) + Store(Local0, MRG2) + Store(0x81, MSTI) + WACK() +} diff --git a/src/mainboard/hp/pavilion_m6_1035dx/acpi/gpe.asl b/src/mainboard/hp/pavilion_m6_1035dx/acpi/gpe.asl new file mode 100644 index 0000000..40a19d4 --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/acpi/gpe.asl @@ -0,0 +1,79 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Scope(_GPE) { /* Start Scope GPE */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PCI0.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + /* Notify (_TZ.TZ00, 0x80) */ + } + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } +} /* End Scope GPE */ diff --git a/src/mainboard/hp/pavilion_m6_1035dx/acpi/ide.asl b/src/mainboard/hp/pavilion_m6_1035dx/acpi/ide.asl new file mode 100644 index 0000000..be4d9bb --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/acpi/ide.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No IDE functionality */ diff --git a/src/mainboard/hp/pavilion_m6_1035dx/acpi/mainboard.asl b/src/mainboard/hp/pavilion_m6_1035dx/acpi/mainboard.asl new file mode 100644 index 0000000..040f069 --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/acpi/mainboard.asl @@ -0,0 +1,43 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ + Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* Some global data */ + Name(OSTP, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ + + /* AcpiGpe0Blk */ + OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04) + Field(GP0B, ByteAcc, NoLock, Preserve) { + , 11, + USBS, 1, + } diff --git a/src/mainboard/hp/pavilion_m6_1035dx/acpi/routing.asl b/src/mainboard/hp/pavilion_m6_1035dx/acpi/routing.asl new file mode 100644 index 0000000..108e204 --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/acpi/routing.asl @@ -0,0 +1,324 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + /* Routing is in System Bus scope */ + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - F15 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + Package(){0x0001FFFF, 0, INTB, 0 }, + Package(){0x0001FFFF, 1, INTC, 0 }, + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, INTD, 0 }, + Package(){0x0003FFFF, 1, INTA, 0 }, + Package(){0x0003FFFF, 2, INTB, 0 }, + Package(){0x0003FFFF, 3, INTC, 0 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, INTB, 0 }, + Package(){0x0005FFFF, 1, INTC, 0 }, + Package(){0x0005FFFF, 2, INTD, 0 }, + Package(){0x0005FFFF, 3, INTA, 0 }, + + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + + /* Bus 0, Dev 8 - Southbridge port (normally hidden) */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + /* SB devices */ + /* Bus 0, Dev 18,19,22 - USB: OHCI @ func 0 + * EHCI @ func 2 */ + Package(){0x0012FFFF, 0, INTC, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 16 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, INTC, 0 }, + Package(){0x0010FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, INTD, 0 }, + + /* Bus 0, Dev 21 Pcie Bridge */ + Package(){0x0015FFFF, 0, INTA, 0 }, + Package(){0x0015FFFF, 1, INTB, 0 }, + Package(){0x0015FFFF, 2, INTC, 0 }, + Package(){0x0015FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - F15 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + Package(){0x0001FFFF, 0, 0, 17 }, + Package(){0x0001FFFF, 1, 0, 18 }, + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + Package(){0x0002FFFF, 1, 0, 19 }, + Package(){0x0002FFFF, 2, 0, 16 }, + Package(){0x0002FFFF, 3, 0, 17 }, + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + Package(){0x0003FFFF, 1, 0, 16 }, + Package(){0x0003FFFF, 2, 0, 17 }, + Package(){0x0003FFFF, 3, 0, 18 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + Package(){0x0004FFFF, 1, 0, 17 }, + Package(){0x0004FFFF, 2, 0, 18 }, + Package(){0x0004FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, 0, 17 }, + Package(){0x0005FFFF, 1, 0, 18 }, + Package(){0x0005FFFF, 2, 0, 19 }, + Package(){0x0005FFFF, 3, 0, 16 }, + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + Package(){0x0006FFFF, 0, 0, 18 }, + Package(){0x0006FFFF, 1, 0, 19 }, + Package(){0x0006FFFF, 2, 0, 16 }, + Package(){0x0006FFFF, 3, 0, 17 }, + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + Package(){0x0007FFFF, 0, 0, 19 }, + Package(){0x0007FFFF, 1, 0, 16 }, + Package(){0x0007FFFF, 2, 0, 17 }, + Package(){0x0007FFFF, 3, 0, 18 }, + + /* Bus 0, Dev 8 - Southbridge port (normally hidden) */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + + /* SB devices in APIC mode */ + /* Bus 0, Dev 18,19,22 - USB: OHCI @ func 0 + * EHCI @ func 2 */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 16 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, 0, 0x12}, + Package(){0x0010FFFF, 1, 0, 0x11}, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, 0, 19 }, + + /* Bus0, Dev 21 PCIE Bridge */ + Package(){0x0015FFFF, 0, 0, 16 }, + Package(){0x0015FFFF, 1, 0, 17 }, + Package(){0x0015FFFF, 2, 0, 18 }, + Package(){0x0015FFFF, 3, 0, 19 }, + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Dev 7 Parmer Hooked to RTK8111E Ethernet Card x1 Device7-GPP3 J16B*/ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS7, Package(){ + /* The onboard Ethernet chip - Dev 7 Parmer Hooked to RTK8111E Ethernet Card x1 Device7-GPP3 J16B*/ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PE0, Package(){ + /* PCIe slot - Hooked to PCIe Bridge 0*/ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APE0, Package(){ + /* PCIe slot - Hooked to PCIe Bridge 0*/ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PE1, Package(){ + /* PCIe slot - Hooked to PCIe Bridge 1*/ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APE1, Package(){ + /* PCIe slot - Hooked to PCIe Bridge 1*/ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PE2, Package(){ + /* PCIe slot - Hooked to PCIe Bridge 2*/ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APE2, Package(){ + /* PCIe slot - Hooked to PCIe Bridge 2*/ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PE3, Package(){ + /* PCIe slot - Hooked to PCIe Bridge 3 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APE3, Package(){ + /* PCIe slot - Hooked to PCIe Bridge 3*/ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + /* SB PCI Bridge J21, J22 */ + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + + Package(){0x0006FFFF, 0, 0, 0x15 }, + Package(){0x0006FFFF, 1, 0, 0x16 }, + Package(){0x0006FFFF, 2, 0, 0x17 }, + Package(){0x0006FFFF, 3, 0, 0x14 }, + }) diff --git a/src/mainboard/hp/pavilion_m6_1035dx/acpi/sata.asl b/src/mainboard/hp/pavilion_m6_1035dx/acpi/sata.asl new file mode 100644 index 0000000..5ad3e47 --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/acpi/sata.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No SATA functionality */ diff --git a/src/mainboard/hp/pavilion_m6_1035dx/acpi/si.asl b/src/mainboard/hp/pavilion_m6_1035dx/acpi/si.asl new file mode 100644 index 0000000..1fb5254 --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/acpi/si.asl @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ + + diff --git a/src/mainboard/hp/pavilion_m6_1035dx/acpi/sleep.asl b/src/mainboard/hp/pavilion_m6_1035dx/acpi/sleep.asl new file mode 100644 index 0000000..09b14bd --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/acpi/sleep.asl @@ -0,0 +1,103 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Wake status package */ +Name(WKST,Package(){Zero, Zero}) + +/* +* _PTS - Prepare to Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2, etc +* +* Exit: +* -none- +* +* The _PTS control method is executed at the beginning of the sleep process +* for S1-S5. The sleeping value is passed to the _PTS control method. This +* control method may be executed a relatively long time before entering the +* sleep state and the OS may abort the operation without notification to +* the ACPI driver. This method cannot modify the configuration or power +* state of any device in the system. +*/ +Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + + Store (0x07, UPWS) +} /* End Method(_PTS) */ + +/* +* _BFS OEM Back From Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* -none- +*/ +Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ +} + +/* +* _WAK System Wake method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* Return package of 2 DWords +* Dword 1 - Status +* 0x00000000 wake succeeded +* 0x00000001 Wake was signaled but failed due to lack of power +* 0x00000002 Wake was signaled but failed due to thermal condition +* Dword 2 - Power Supply state +* if non-zero the effective S-state the power supply entered +*/ +Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,USBS) + + Return(WKST) +} /* End Method(_WAK) */ diff --git a/src/mainboard/hp/pavilion_m6_1035dx/acpi/superio.asl b/src/mainboard/hp/pavilion_m6_1035dx/acpi/superio.asl new file mode 100644 index 0000000..ec72e36 --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/acpi/superio.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No Super I/O device or functionality yet */ diff --git a/src/mainboard/hp/pavilion_m6_1035dx/acpi/thermal.asl b/src/mainboard/hp/pavilion_m6_1035dx/acpi/thermal.asl new file mode 100644 index 0000000..0466a1b --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/acpi/thermal.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No thermal zone functionality */ diff --git a/src/mainboard/hp/pavilion_m6_1035dx/acpi/usb_oc.asl b/src/mainboard/hp/pavilion_m6_1035dx/acpi/usb_oc.asl new file mode 100644 index 0000000..1e63d97 --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/acpi/usb_oc.asl @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* USB overcurrent mapping pins. */ +Name(UOM0, 0) +Name(UOM1, 2) +Name(UOM2, 0) +Name(UOM3, 7) +Name(UOM4, 2) +Name(UOM5, 2) +Name(UOM6, 6) +Name(UOM7, 2) +Name(UOM8, 6) +Name(UOM9, 6) diff --git a/src/mainboard/hp/pavilion_m6_1035dx/acpi_tables.c b/src/mainboard/hp/pavilion_m6_1035dx/acpi_tables.c new file mode 100644 index 0000000..d93fecc --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/acpi_tables.c @@ -0,0 +1,329 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include "agesawrapper.h" +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam15.h> + +#include "agesawrapper.h" + +#define DUMP_ACPI_TABLES 0 + +#if DUMP_ACPI_TABLES == 1 + +static void dump_mem(u32 start, u32 end) +{ + u32 i; + print_debug("dump_mem:"); + for (i = start; i < end; i++) { + if ((i & 0xf) == 0) { + printk(BIOS_DEBUG, "\n%08x:", i); + } + printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i)); + } + print_debug("\n"); +} +#endif + +extern const unsigned char AmlCode[]; + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write Hudson IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS, + IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edige-triggered, Active high */ + + /* create all subtables for processors */ + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1); + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long acpi_fill_hest(acpi_hest_t *hest) +{ + void *addr, *current; + + /* Skip the HEST header. */ + current = (void *)(hest + 1); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + return (unsigned long)current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + /* Not implemented */ + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) +{ + int lens; + msr_t msr; + char pscope[] = "\_SB.PCI0"; + + lens = acpigen_write_scope(pscope); + msr = rdmsr(TOP_MEM); + lens += acpigen_write_name_dword("TOM1", msr.lo); + msr = rdmsr(TOP_MEM2); + /* + * Since XP only implements parts of ACPI 2.0, we can't use a qword + * here. + * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt + * slide 22ff. + * Shift value right by 20 bit to make it fit into 32bit, + * giving us 1MB granularity and a limit of almost 4Exabyte of memory. + */ + lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); + acpigen_patch_len(lens - 1); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; + acpi_header_t *alib; + acpi_header_t *ivrs; + acpi_hest_t *hest; + + get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; /* it will used by fadt */ + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ /* it needs 64 bit alignment */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; /* it will be used by fadt */ + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* HEST */ + current = ALIGN(current, 8); + hest = (acpi_hest_t *)current; + acpi_write_hest((void *)current); + acpi_add_table(rsdp, (void *)current); + current += ((acpi_header_t *)current)->length; + + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * IVRS at %lx\n", current); + ivrs = agesawrapper_getlateinitptr(PICK_IVRS); + if (ivrs != NULL) { + memcpy((void *)current, ivrs, ivrs->length); + ivrs = (acpi_header_t *) current; + current += ivrs->length; + acpi_add_table(rsdp, ivrs); + } else { + printk(BIOS_DEBUG, " AGESA IVRS table NULL. Skipping.\n"); + } + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); + if (srat != NULL) { + memcpy((void *)current, srat, srat->header.length); + srat = (acpi_srat_t *) current; + current += srat->header.length; + acpi_add_table(rsdp, srat); + } else { + printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); + } + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); + if (slit != NULL) { + memcpy((void *)current, slit, slit->header.length); + slit = (acpi_slit_t *) current; + current += slit->header.length; + acpi_add_table(rsdp, slit); + } else { + printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); + } + + /* ALIB */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); + alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); + if (alib != NULL) { + memcpy((void *)current, alib, alib->length); + alib = (acpi_header_t *) current; + current += alib->length; + acpi_add_table(rsdp, (void *)alib); + } + else { + printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); + } + + /* this pstate ssdt may cause Blue Screen: Fixed: Keep this comment for a while. */ + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); + ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); + if (ssdt != NULL) { + memcpy((void *)current, ssdt, ssdt->length); + ssdt = (acpi_header_t *) current; + current += ssdt->length; + } + else { + printk(BIOS_DEBUG, " AGESA PState table NULL. Skipping.\n"); + } + acpi_add_table(rsdp,ssdt); + + printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current); + + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); + ssdt = (acpi_header_t *)current; + + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + current += ssdt->length; + acpi_add_table(rsdp, ssdt); + +#if DUMP_ACPI_TABLES == 1 + printk(BIOS_DEBUG, "rsdp\n"); + dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); + + printk(BIOS_DEBUG, "rsdt\n"); + dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); + + printk(BIOS_DEBUG, "madt\n"); + dump_mem(madt, ((void *)madt) + madt->header.length); + + printk(BIOS_DEBUG, "srat\n"); + dump_mem(srat, ((void *)srat) + srat->header.length); + + printk(BIOS_DEBUG, "slit\n"); + dump_mem(slit, ((void *)slit) + slit->header.length); + + printk(BIOS_DEBUG, "ssdt\n"); + dump_mem(ssdt, ((void *)ssdt) + ssdt->length); + + printk(BIOS_DEBUG, "fadt\n"); + dump_mem(fadt, ((void *)fadt) + fadt->header.length); + + printk(BIOS_DEBUG, "hest\n"); + dump_mem(hest, ((void *)hest) + hest->header.length); +#endif + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/hp/pavilion_m6_1035dx/agesawrapper.c b/src/mainboard/hp/pavilion_m6_1035dx/agesawrapper.c new file mode 100644 index 0000000..827ce6d --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/agesawrapper.c @@ -0,0 +1,721 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ + +#include <stdint.h> +#include <string.h> +#include <cpu/x86/mtrr.h> +#include "agesawrapper.h" +#include "BiosCallOuts.h" +#include "cpuRegisters.h" +#include "cpuCacheInit.h" +#include "cpuApicUtilities.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "Dispatcher.h" +#include "cpuCacheInit.h" +#include "amdlib.h" +#include "PlatformGnbPcieComplex.h" +#include "Filecode.h" +#include "heapManager.h" +#include "FchPlatform.h" +#include "Fch.h" +#include <cpu/amd/agesa/s3_resume.h> +#include <cbmem.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <device/device.h> +#include "hudson.h" + +VOID FchInitS3LateRestore (IN FCH_DATA_BLOCK *FchDataPtr); +VOID FchInitS3EarlyRestore (IN FCH_DATA_BLOCK *FchDataPtr); + +#define FILECODE UNASSIGNED_FILE_FILECODE + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ + +/* ACPI table pointers returned by AmdInitLate */ +VOID *DmiTable = NULL; +VOID *AcpiPstate = NULL; +VOID *AcpiSrat = NULL; +VOID *AcpiSlit = NULL; + +VOID *AcpiWheaMce = NULL; +VOID *AcpiWheaCmc = NULL; +VOID *AcpiAlib = NULL; +VOID *AcpiIvrs = NULL; + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * E X P O R T E D F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*--------------------------------------------------------------------------------------- + * L O C A L F U N C T I O N S + *--------------------------------------------------------------------------------------- + */ +UINT32 +agesawrapper_amdinitcpuio ( + VOID + ) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + /* Enable legacy video routing: D18F1xF4 VGA Enable */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); + PciData = 1; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* The platform BIOS needs to ensure the memory ranges of Hudson legacy + * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are + * set to non-posted regions. + */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); + PciData = 0x00FEDF00; /* last address before processor local APIC at FEE00000 */ + PciData |= 1 << 7; /* set NP (non-posted) bit */ + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); + PciData = (0xFED00000 >> 8) | 3; /* lowest NP address is HPET at FED00000 */ + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Map the remaining PCI hole as posted MMIO */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); + PciData = 0x00FECF00; /* last address before non-posted range */ + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); + MsrReg = (MsrReg >> 8) | 3; + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); + PciData = (UINT32)MsrReg; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Send all IO (0000-FFFF) to southbridge. */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); + PciData = 0x0000F000; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); + PciData = 0x00000003; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + Status = AGESA_SUCCESS; + return (UINT32)Status; +} + +UINT32 +agesawrapper_amdinitmmio ( + VOID + ) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + /* + Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base + Address MSR register. + */ + MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1; + LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); + + /* + Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. + */ + LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); + MsrReg = MsrReg | 0x0000400000000000; + LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); + + /* For serial port */ + PciData = 0xFF03FFD5; + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Set ROM cache onto WP to decrease post time */ + MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull; + LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader); + MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull; + LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader); + + Status = AGESA_SUCCESS; + return (UINT32)Status; +} + +UINT32 +agesawrapper_amdinitreset ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESET_PARAMS AmdResetParams; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + LibAmdMemFill (&AmdResetParams, + 0, + sizeof (AMD_RESET_PARAMS), + &(AmdResetParams.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; + AmdParamStruct.AllocationMethod = ByHost; + AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); + AmdParamStruct.NewStructPtr = &AmdResetParams; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + AmdResetParams.HtConfig.Depth = 0; +#if !CONFIG_HUDSON_XHCI_ENABLE + AmdResetParams.FchInterface.Xhci0Enable = FALSE; +#endif + AmdResetParams.FchInterface.Xhci1Enable = FALSE; + + status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + return (UINT32)status; +} + +UINT32 +agesawrapper_amdinitearly ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_EARLY_PARAMS *AmdEarlyParamsPtr; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; + OemCustomizeInitEarly (AmdEarlyParamsPtr); + + status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + + return (UINT32)status; +} + +UINT32 GetHeapBase( + AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 heap; + +#if CONFIG_HAVE_ACPI_RESUME + /* Both romstage and ramstage has this S3 detect. */ + if (acpi_get_sleep_type() == 3) + heap = (UINT32)cbmem_find(CBMEM_ID_RESUME_SCRATCH) + (CONFIG_HIGH_SCRATCH_MEMORY_SIZE - BIOS_HEAP_SIZE); /* base + high_stack_size */ + else +#endif + heap = BIOS_HEAP_START_ADDRESS; /* Low mem */ + + return heap; +} + +UINT32 +agesawrapper_amdinitpost ( + VOID + ) +{ + AGESA_STATUS status; + UINT16 i; + UINT32 *HeadPtr; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_POST_PARAMS *PostParams; + BIOS_HEAP_MANAGER *BiosManagerPtr; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr; + status = AmdInitPost (PostParams); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + /* Initialize heap space */ + BiosManagerPtr = (BIOS_HEAP_MANAGER *)GetHeapBase(&AmdParamStruct.StdHeader); + + HeadPtr = (UINT32 *) ((UINT8 *) BiosManagerPtr + sizeof (BIOS_HEAP_MANAGER)); + for (i = 0; i < ((BIOS_HEAP_SIZE/4) - (sizeof (BIOS_HEAP_MANAGER)/4)); i++) + { + *HeadPtr = 0x00000000; + HeadPtr++; + } + BiosManagerPtr->StartOfAllocatedNodes = 0; + BiosManagerPtr->StartOfFreedNodes = 0; + + return (UINT32)status; +} + +UINT32 +agesawrapper_amdinitenv ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_ENV_PARAMS *EnvParam; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + status = AmdCreateStruct (&AmdParamStruct); + EnvParam = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr; + + status = AmdInitEnv (EnvParam); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(EnvParam->StdHeader.HeapStatus); + /* Initialize Subordinate Bus Number and Secondary Bus Number + * In platform BIOS this address is allocated by PCI enumeration code + Modify D1F0x18 + */ + + return (UINT32)status; +} + +VOID * +agesawrapper_getlateinitptr ( + int pick + ) +{ + switch (pick) { + case PICK_DMI: + return DmiTable; + case PICK_PSTATE: + return AcpiPstate; + case PICK_SRAT: + return AcpiSrat; + case PICK_SLIT: + return AcpiSlit; + case PICK_WHEA_MCE: + return AcpiWheaMce; + case PICK_WHEA_CMC: + return AcpiWheaCmc; + case PICK_ALIB: + return AcpiAlib; + case PICK_IVRS: + return AcpiIvrs; + default: + return NULL; + } +} + +UINT32 +agesawrapper_amdinitmid ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + + /* Enable MMIO on AMD CPU Address Map Controller */ + agesawrapper_amdinitcpuio (); + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + + ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr)->GnbMidConfiguration.iGpuVgaMode = 0;/* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */ + status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + + return (UINT32)status; +} + +UINT32 +agesawrapper_amdinitlate ( + VOID + ) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_LATE_PARAMS *AmdLateParams; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + /* NOTE: if not call amdcreatestruct, the initializer(AmdInitLateInitializer) would not be called */ + AmdCreateStruct(&AmdParamStruct); + AmdLateParams = (AMD_LATE_PARAMS *)AmdParamStruct.NewStructPtr; + Status = AmdInitLate(AmdLateParams); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(AmdLateParams->StdHeader.HeapStatus); + ASSERT(Status == AGESA_SUCCESS); + } + + DmiTable = AmdLateParams->DmiTable; + AcpiPstate = AmdLateParams->AcpiPState; + AcpiSrat = AmdLateParams->AcpiSrat; + AcpiSlit = AmdLateParams->AcpiSlit; + + AcpiWheaMce = AmdLateParams->AcpiWheaMce; + AcpiWheaCmc = AmdLateParams->AcpiWheaCmc; + AcpiAlib = AmdLateParams->AcpiAlib; + AcpiIvrs = AmdLateParams->AcpiIvrs; + + printk(BIOS_DEBUG, "DmiTable:%x, AcpiPstatein: %x, AcpiSrat:%x," + "AcpiSlit:%x, Mce:%x, Cmc:%x," + "Alib:%x, AcpiIvrs:%x in %s\n", + (unsigned int)DmiTable, (unsigned int)AcpiPstate, (unsigned int)AcpiSrat, + (unsigned int)AcpiSlit, (unsigned int)AcpiWheaMce, (unsigned int)AcpiWheaCmc, + (unsigned int)AcpiAlib, (unsigned int)AcpiIvrs, __func__); + + /* AmdReleaseStruct (&AmdParamStruct); */ + return (UINT32)Status; +} + +UINT32 +agesawrapper_amdlaterunaptask ( + UINT32 Func, + UINT32 Data, + VOID *ConfigPtr + ) +{ + AGESA_STATUS Status; + AP_EXE_PARAMS ApExeParams; + + LibAmdMemFill (&ApExeParams, + 0, + sizeof (AP_EXE_PARAMS), + &(ApExeParams.StdHeader)); + + ApExeParams.StdHeader.AltImageBasePtr = 0; + ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + ApExeParams.StdHeader.Func = 0; + ApExeParams.StdHeader.ImageBasePtr = 0; + ApExeParams.FunctionNumber = Func; + ApExeParams.RelatedDataBlock = ConfigPtr; + + Status = AmdLateRunApTask (&ApExeParams); + if (Status != AGESA_SUCCESS) { + /* agesawrapper_amdreadeventlog(); */ + ASSERT(Status == AGESA_SUCCESS); + } + + return (UINT32)Status; +} + +#if CONFIG_HAVE_ACPI_RESUME + +UINT32 agesawrapper_amdinitresume(VOID) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESUME_PARAMS *AmdResumeParamsPtr; + S3_DATA_TYPE S3DataType; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr; + + AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0; + AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0; + S3DataType = S3DataTypeNonVolatile; + OemAgesaGetS3Info (S3DataType, + (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize, + (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage); + + status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr); + + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + + return (UINT32)status; +} + +#ifndef __PRE_RAM__ +UINT32 agesawrapper_fchs3earlyrestore (VOID) +{ + AGESA_STATUS status = AGESA_SUCCESS; + + FCH_DATA_BLOCK FchParams; + AMD_CONFIG_PARAMS StdHeader; + + StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; + StdHeader.AltImageBasePtr = 0; + StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + StdHeader.Func = 0; + StdHeader.ImageBasePtr = 0; + + //FchParams = InitEnvCfgDefault; + FchParams.StdHeader = &StdHeader; + s3_resume_init_data(&FchParams); + + FchInitS3EarlyRestore(&FchParams); + + return status; +} +#endif + +UINT32 agesawrapper_amds3laterestore (VOID) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdInterfaceParams; + AMD_S3LATE_PARAMS AmdS3LateParams; + AMD_S3LATE_PARAMS *AmdS3LateParamsPtr; + S3_DATA_TYPE S3DataType; + + agesawrapper_amdinitcpuio(); + LibAmdMemFill (&AmdS3LateParams, + 0, + sizeof (AMD_S3LATE_PARAMS), + &(AmdS3LateParams.StdHeader)); + AmdInterfaceParams.StdHeader.ImageBasePtr = 0; + AmdInterfaceParams.AllocationMethod = ByHost; + AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE; + AmdInterfaceParams.NewStructPtr = &AmdS3LateParams; + AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdS3LateParamsPtr = &AmdS3LateParams; + AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS); + + AmdCreateStruct (&AmdInterfaceParams); + + AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0; + S3DataType = S3DataTypeVolatile; + + OemAgesaGetS3Info (S3DataType, + (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize, + (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage); + + Status = AmdS3LateRestore (AmdS3LateParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); + ASSERT(Status == AGESA_SUCCESS); + } + + return (UINT32)Status; +} + +#ifndef __PRE_RAM__ + +extern UINT8 picr_data[0x54], intr_data[0x54]; + +UINT32 agesawrapper_fchs3laterestore (VOID) +{ + AGESA_STATUS status = AGESA_SUCCESS; + + FCH_DATA_BLOCK FchParams; + AMD_CONFIG_PARAMS StdHeader; + UINT8 byte; + + StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; + StdHeader.AltImageBasePtr = 0; + StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + StdHeader.Func = 0; + StdHeader.ImageBasePtr = 0; + + //FchParams = InitEnvCfgDefault; + FchParams.StdHeader = &StdHeader; + s3_resume_init_data(&FchParams); + FchInitS3LateRestore(&FchParams); + /* PIC IRQ routine */ + for (byte = 0x0; byte < sizeof(picr_data); byte ++) { + outb(byte, 0xC00); + outb(picr_data[byte], 0xC01); + } + + /* APIC IRQ routine */ + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } + + return status; +} +#endif + +#ifndef __PRE_RAM__ + +UINT32 agesawrapper_amdS3Save(VOID) +{ + AGESA_STATUS Status; + AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr; + AMD_INTERFACE_PARAMS AmdInterfaceParams; + S3_DATA_TYPE S3DataType; + + LibAmdMemFill (&AmdInterfaceParams, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdInterfaceParams.StdHeader)); + + AmdInterfaceParams.StdHeader.ImageBasePtr = 0; + AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdInterfaceParams.AllocationMethod = PostMemDram; + AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE; + AmdInterfaceParams.StdHeader.AltImageBasePtr = 0; + AmdInterfaceParams.StdHeader.Func = 0; + + AmdCreateStruct(&AmdInterfaceParams); + AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr; + AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader; + + Status = AmdS3Save(AmdS3SaveParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); + ASSERT(Status == AGESA_SUCCESS); + } + + S3DataType = S3DataTypeNonVolatile; + printk(BIOS_DEBUG, "NvStorageSize=%x, NvStorage=%x\n", + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorage); + + Status = OemAgesaSaveS3Info ( + S3DataType, + AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, + AmdS3SaveParamsPtr->S3DataBlock.NvStorage); + + printk(BIOS_DEBUG, "VolatileStorageSize=%x, VolatileStorage=%x\n", + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage); + + if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) { + S3DataType = S3DataTypeVolatile; + + Status = OemAgesaSaveS3Info ( + S3DataType, + AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, + AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage); + } + OemAgesaSaveMtrr(); + + AmdReleaseStruct (&AmdInterfaceParams); + + return (UINT32)Status; +} + +#endif /* #ifndef __PRE_RAM__ */ +#endif /* CONFIG_HAVE_ACPI_RESUME */ + +UINT32 +agesawrapper_amdreadeventlog ( + UINT8 HeapStatus + ) +{ + AGESA_STATUS Status; + EVENT_PARAMS AmdEventParams; + + LibAmdMemFill (&AmdEventParams, + 0, + sizeof (EVENT_PARAMS), + &(AmdEventParams.StdHeader)); + + AmdEventParams.StdHeader.AltImageBasePtr = 0; + AmdEventParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdEventParams.StdHeader.Func = 0; + AmdEventParams.StdHeader.ImageBasePtr = 0; + AmdEventParams.StdHeader.HeapStatus = HeapStatus; + Status = AmdReadEventLog (&AmdEventParams); + while (AmdEventParams.EventClass != 0) { + printk(BIOS_DEBUG,"\nEventLog: EventClass = %x, EventInfo = %x.\n", (unsigned int)AmdEventParams.EventClass,(unsigned int)AmdEventParams.EventInfo); + printk(BIOS_DEBUG," Param1 = %x, Param2 = %x.\n",(unsigned int)AmdEventParams.DataParam1, (unsigned int)AmdEventParams.DataParam2); + printk(BIOS_DEBUG," Param3 = %x, Param4 = %x.\n",(unsigned int)AmdEventParams.DataParam3, (unsigned int)AmdEventParams.DataParam4); + Status = AmdReadEventLog (&AmdEventParams); + } + + return (UINT32)Status; +} diff --git a/src/mainboard/hp/pavilion_m6_1035dx/agesawrapper.h b/src/mainboard/hp/pavilion_m6_1035dx/agesawrapper.h new file mode 100644 index 0000000..5007510 --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/agesawrapper.h @@ -0,0 +1,97 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ + +#ifndef _AGESAWRAPPER_H_ +#define _AGESAWRAPPER_H_ + +#include <stdint.h> +#include "Porting.h" +#include "AGESA.h" + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ +/* Define AMD Ontario APPU SSID/SVID */ +#define AMD_APU_SVID 0x1022 +#define AMD_APU_SSID 0x1234 +#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS + +enum { + PICK_DMI, /* DMI Interface */ + PICK_PSTATE, /* Acpi Pstate SSDT Table */ + PICK_SRAT, /* SRAT Table */ + PICK_SLIT, /* SLIT Table */ + PICK_WHEA_MCE, /* WHEA MCE table */ + PICK_WHEA_CMC, /* WHEA CMV table */ + PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ + PICK_IVRS, /* IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table */ +}; + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ + +typedef struct { + UINT32 CalloutName; + AGESA_STATUS (*CalloutPtr) (UINT32 Func, UINT32 Data, VOID* ConfigPtr); +} BIOS_CALLOUT_STRUCT; + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * E X P O R T E D F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*--------------------------------------------------------------------------------------- + * L O C A L F U N C T I O N S + *--------------------------------------------------------------------------------------- + */ + +UINT32 agesawrapper_amdinitreset (void); +UINT32 agesawrapper_amdinitearly (void); +UINT32 agesawrapper_amdinitenv (void); +UINT32 agesawrapper_amdinitlate (void); +UINT32 agesawrapper_amdinitpost (void); +UINT32 agesawrapper_amdinitmid (void); +UINT32 agesawrapper_amdreadeventlog (UINT8 HeapStatus); +UINT32 agesawrapper_amdinitmmio (void); +UINT32 agesawrapper_amdinitcpuio (void); +void *agesawrapper_getlateinitptr (int pick); +UINT32 agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, void *ConfigPtr); +UINT32 agesawrapper_amdS3Save(VOID); +UINT32 agesawrapper_amdinitresume(VOID); +UINT32 agesawrapper_amds3laterestore (VOID); + +UINT32 agesawrapper_fchs3earlyrestore (VOID); +UINT32 agesawrapper_fchs3laterestore (VOID); + +UINT32 GetHeapBase(AMD_CONFIG_PARAMS *StdHeader); + +#endif diff --git a/src/mainboard/hp/pavilion_m6_1035dx/board_info.txt b/src/mainboard/hp/pavilion_m6_1035dx/board_info.txt new file mode 100644 index 0000000..4ed37bc --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/board_info.txt @@ -0,0 +1,5 @@ +Board name: DB-FS1r2 (Parmer) +Category: eval +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n diff --git a/src/mainboard/hp/pavilion_m6_1035dx/buildOpts.c b/src/mainboard/hp/pavilion_m6_1035dx/buildOpts.c new file mode 100644 index 0000000..1a23190 --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/buildOpts.c @@ -0,0 +1,499 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * AMD User options selection for a Brazos platform solution system + * + * This file is placed in the user's platform directory and contains the + * build option selections desired for that platform. + * + * For Information about this file, see @ref platforminstall. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 23714 $ @e $Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ + */ + +#include "AGESA.h" +//#include "CommonReturns.h" +#include "Filecode.h" +#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE + +/* Select the cpu family. */ +#define INSTALL_FAMILY_10_SUPPORT FALSE +#define INSTALL_FAMILY_12_SUPPORT FALSE +#define INSTALL_FAMILY_14_SUPPORT FALSE +#define INSTALL_FAMILY_15_MODEL_1x_SUPPORT TRUE + +/* Select the cpu socket type. */ +#define INSTALL_G34_SOCKET_SUPPORT FALSE +#define INSTALL_C32_SOCKET_SUPPORT FALSE +#define INSTALL_S1G3_SOCKET_SUPPORT FALSE +#define INSTALL_S1G4_SOCKET_SUPPORT FALSE +#define INSTALL_ASB2_SOCKET_SUPPORT FALSE +#define INSTALL_FS1_SOCKET_SUPPORT TRUE +#define INSTALL_FM1_SOCKET_SUPPORT FALSE +#define INSTALL_FP2_SOCKET_SUPPORT TRUE +#define INSTALL_FT1_SOCKET_SUPPORT FALSE +#define INSTALL_AM3_SOCKET_SUPPORT FALSE + +#define INSTALL_FM2_SOCKET_SUPPORT FALSE + +//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE +//#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE +//#define BLDOPT_REMOVE_ECC_SUPPORT TRUE +//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE +//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE +#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE +#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE +#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE +//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE +#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE +//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE +#define BLDOPT_REMOVE_SRAT FALSE //TRUE +#define BLDOPT_REMOVE_SLIT FALSE //TRUE +#define BLDOPT_REMOVE_WHEA FALSE //TRUE +#define BLDOPT_REMOVE_CRAT TRUE +#define BLDOPT_REMOVE_DMI TRUE +//#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE + +//This element selects whether P-States should be forced to be independent, +// as reported by the ACPI _PSD object. For single-link processors, +// setting TRUE for OS to support this feature. + +//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE + +#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER +/* Build configuration values here. + */ +#define BLDCFG_VRM_CURRENT_LIMIT 90000 +#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 +#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 0 +#define BLDCFG_PLAT_NUM_IO_APICS 3 +#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST +#define BLDCFG_MEM_INIT_PSTATE 0 + +#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE + +#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1866_FREQUENCY +#define BLDCFG_MEMORY_MODE_UNGANGED TRUE +#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE +#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE +#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE +#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE +#define BLDCFG_MEMORY_POWER_DOWN TRUE +#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT +#define BLDCFG_ONLINE_SPARE FALSE +#define BLDCFG_BANK_SWIZZLE TRUE +#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO +#define BLDCFG_MEMORY_CLOCK_SELECT DDR1866_FREQUENCY +#define BLDCFG_DQS_TRAINING_CONTROL TRUE +#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE +#define BLDCFG_USE_BURST_MODE FALSE +#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE +#define BLDCFG_ENABLE_ECC_FEATURE TRUE +#define BLDCFG_ECC_REDIRECTION FALSE +#define BLDCFG_SCRUB_DRAM_RATE 0 +#define BLDCFG_SCRUB_L2_RATE 0 +#define BLDCFG_SCRUB_L3_RATE 0 +#define BLDCFG_SCRUB_IC_RATE 0 +#define BLDCFG_SCRUB_DC_RATE 0 +#define BLDCFG_ECC_SYMBOL_SIZE 4 +#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 +#define BLDCFG_ECC_SYNC_FLOOD FALSE +#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE +#define BLDCFG_1GB_ALIGN FALSE +#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE +#define BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM 36 // PCIE Spread Spectrum default value 0.36% +#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770 + +#define BLDOPT_REMOVE_ALIB FALSE +#define BLDCFG_PLATFORM_CPB_MODE CpbModeDisabled +#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P' +#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' +#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 + +#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 200 +#define BLDCFG_CFG_ABM_SUPPORT 0 + +//#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770 + +// Specify the default values for the VRM controlling the VDDNB plane. +// If not specified, the values used for the core VRM will be applied +//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 // Not currently used on Trinity +//#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 // Zero - disable NBPSI_L, Non-zero - enable NBPSI_L +//#define BLDCFG_VRM_NB_SLEW_RATE 5000 // Used in calculating the VSRampSlamTime +//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 // Not currently used on Trinity +//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE 0 // Not currently used on Trinity +//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 // Not currently used on Trinity + +#define BLDCFG_VRM_NB_CURRENT_LIMIT 60000 + +#define BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON 3 +#define BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL 3 + +#if CONFIG_GFXUMA +#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED +#define BLDCFG_UMA_ALLOCATION_MODE UMA_SPECIFIED +//#define BLDCFG_UMA_ALLOCATION_SIZE 0x1000//0x1800//0x1000 /* (1000 << 16) = 256M*/ +#define BLDCFG_UMA_ALLOCATION_SIZE 0x2000//512M +#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE +#endif + +#define BLDCFG_IOMMU_SUPPORT FALSE + +#define BLDCFG_CFG_GNB_HD_AUDIO TRUE +//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID +//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID +//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID + +/* Process the options... + * This file include MUST occur AFTER the user option selection settings + */ +#define AGESA_ENTRY_INIT_RESET TRUE +#define AGESA_ENTRY_INIT_RECOVERY FALSE +#define AGESA_ENTRY_INIT_EARLY TRUE +#define AGESA_ENTRY_INIT_POST TRUE +#define AGESA_ENTRY_INIT_ENV TRUE +#define AGESA_ENTRY_INIT_MID TRUE +#define AGESA_ENTRY_INIT_LATE TRUE +#define AGESA_ENTRY_INIT_S3SAVE TRUE +#define AGESA_ENTRY_INIT_RESUME TRUE //TRUE +#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE +#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE +/* + * Customized OEM build configurations for FCH component + */ +// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00 +// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20 +// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00 +// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400 +// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404 +// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408 +// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410 +// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420 +// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000 +// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000 +// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000 +// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0 +// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00 +// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000 +// #define BLDCFG_AZALIA_SSID 0x780D1022 +// #define BLDCFG_SMBUS_SSID 0x780B1022 +// #define BLDCFG_IDE_SSID 0x780C1022 +// #define BLDCFG_SATA_AHCI_SSID 0x78011022 +// #define BLDCFG_SATA_IDE_SSID 0x78001022 +// #define BLDCFG_SATA_RAID5_SSID 0x78031022 +// #define BLDCFG_SATA_RAID_SSID 0x78021022 +// #define BLDCFG_EHCI_SSID 0x78081022 +// #define BLDCFG_OHCI_SSID 0x78071022 +// #define BLDCFG_LPC_SSID 0x780E1022 +// #define BLDCFG_SD_SSID 0x78061022 +// #define BLDCFG_XHCI_SSID 0x78121022 +// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE +// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE +// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4 +// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE + +CONST AP_MTRR_SETTINGS ROMDATA TrinityApMtrrSettingsList[] = +{ + { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E }, + { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E }, + { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 }, + { CPU_LIST_TERMINAL } +}; + +#define BLDCFG_AP_MTRR_SETTINGS_LIST &TrinityApMtrrSettingsList + +//#include "VirgoInstall.h" + +/* Include the files that instantiate the configuration definitions. */ +#include "cpuRegisters.h" +#include "cpuFamRegisters.h" +#include "cpuFamilyTranslation.h" +#include "AdvancedApi.h" +#include "heapManager.h" +#include "CreateStruct.h" +#include "cpuFeatures.h" +#include "Table.h" +#include "CommonReturns.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "GnbInterface.h" + + // This is the delivery package title, "BrazosPI" + // This string MUST be exactly 8 characters long +#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} + + // This is the release version number of the AGESA component + // This string MUST be exactly 12 characters long +#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '} + +/* MEMORY_BUS_SPEED */ +#define DDR400_FREQUENCY 200 ///< DDR 400 +#define DDR533_FREQUENCY 266 ///< DDR 533 +#define DDR667_FREQUENCY 333 ///< DDR 667 +#define DDR800_FREQUENCY 400 ///< DDR 800 +#define DDR1066_FREQUENCY 533 ///< DDR 1066 +#define DDR1333_FREQUENCY 667 ///< DDR 1333 +#define DDR1600_FREQUENCY 800 ///< DDR 1600 +#define DDR1866_FREQUENCY 933 ///< DDR 1866 +#define DDR2100_FREQUENCY 1050 ///< DDR 2100 +#define DDR2133_FREQUENCY 1066 ///< DDR 2133 +#define DDR2400_FREQUENCY 1200 ///< DDR 2400 +#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency + +/* QUANDRANK_TYPE*/ +#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM +#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM + +/* USER_MEMORY_TIMING_MODE */ +#define TIMING_MODE_AUTO 0 ///< Use best rate possible +#define TIMING_MODE_LIMITED 1 ///< Set user top limit +#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed + +/* POWER_DOWN_MODE */ +#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode +#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode + +/* + * Agesa optional capabilities selection. + * Uncomment and mark FALSE those features you wish to include in the build. + * Comment out or mark TRUE those features you want to REMOVE from the build. + */ + +#define DFLT_SMBUS0_BASE_ADDRESS 0xB00 +#define DFLT_SMBUS1_BASE_ADDRESS 0xB20 +#define DFLT_SIO_PME_BASE_ADDRESS 0xE00 +#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800 +#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804 +#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808 +#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810 +#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820 +#define DFLT_SPI_BASE_ADDRESS 0xFEC10000 +#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 +#define DFLT_HPET_BASE_ADDRESS 0xFED00000 +#define DFLT_SMI_CMD_PORT 0xB0 +#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 +#define DFLT_GEC_BASE_ADDRESS 0xFED61000 +#define DFLT_AZALIA_SSID 0x780D1022 +#define DFLT_SMBUS_SSID 0x780B1022 +#define DFLT_IDE_SSID 0x780C1022 +#define DFLT_SATA_AHCI_SSID 0x78011022 +#define DFLT_SATA_IDE_SSID 0x78001022 +#define DFLT_SATA_RAID5_SSID 0x78031022 +#define DFLT_SATA_RAID_SSID 0x78021022 +#define DFLT_EHCI_SSID 0x78081022 +#define DFLT_OHCI_SSID 0x78071022 +#define DFLT_LPC_SSID 0x780E1022 +#define DFLT_SD_SSID 0x78061022 +#define DFLT_XHCI_SSID 0x78121022 +#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE +#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE +#define DFLT_FCH_GPP_LINK_CONFIG PortA4 +#define DFLT_FCH_GPP_PORT0_PRESENT FALSE +#define DFLT_FCH_GPP_PORT1_PRESENT FALSE +#define DFLT_FCH_GPP_PORT2_PRESENT FALSE +#define DFLT_FCH_GPP_PORT3_PRESENT FALSE +#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE +//#define BLDCFG_IR_PIN_CONTROL 0x33 + +GPIO_CONTROL parmer_gpio[] = { + {183, Function1, GpioIn | GpioOutEnB | PullUpB}, + {-1} +}; +#define BLDCFG_FCH_GPIO_CONTROL_LIST (&parmer_gpio[0]) + +// The following definitions specify the default values for various parameters in which there are +// no clearly defined defaults to be used in the common file. The values below are based on product +// and BKDG content, please consult the AGESA Memory team for consultation. +#define DFLT_SCRUB_DRAM_RATE (0) +#define DFLT_SCRUB_L2_RATE (0) +#define DFLT_SCRUB_L3_RATE (0) +#define DFLT_SCRUB_IC_RATE (0) +#define DFLT_SCRUB_DC_RATE (0) +#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define DFLT_VRM_SLEW_RATE (5000) + +#include "PlatformInstall.h" + +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + // + // The following macros are supported (use comma to separate macros): + // + // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) + // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. + // AGESA will base on this value to disable unused MemClk to save power. + // Example: + // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: + // Bit AM3/S1g3 pin name + // 0 M[B,A]_CLK_H/L[0] + // 1 M[B,A]_CLK_H/L[1] + // 2 M[B,A]_CLK_H/L[2] + // 3 M[B,A]_CLK_H/L[3] + // 4 M[B,A]_CLK_H/L[4] + // 5 M[B,A]_CLK_H/L[5] + // 6 M[B,A]_CLK_H/L[6] + // 7 M[B,A]_CLK_H/L[7] + // And platform has the following routing: + // CS0 M[B,A]_CLK_H/L[4] + // CS1 M[B,A]_CLK_H/L[2] + // CS2 M[B,A]_CLK_H/L[3] + // CS3 M[B,A]_CLK_H/L[5] + // Then platform can specify the following macro: + // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) + // + // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) + // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. + // AGESA will base on this value to tristate unused CKE to save power. + // + // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) + // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. + // AGESA will base on this value to tristate unused ODT pins to save power. + // + // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) + // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. + // AGESA will base on this value to tristate unused Chip select to save power. + // + // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) + // Specifies the number of DIMM slots per channel. + // + // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) + // Specifies the number of Chip selects per channel. + // + // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) + // Specifies the number of channels per socket. + // + // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) + // Specifies DDR bus speed of channel ChannelID on socket SocketID. + // + // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) + // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) + // + // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, + // Byte6Seed, Byte7Seed, ByteEccSeed) + // Specifies the write leveling seed for a channel of a socket. + // + // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, + // Byte6Seed, Byte7Seed, ByteEccSeed) + // Speicifes the HW RXEN training seed for a channel of a socket + // + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A), + ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00), + CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + + PSO_END +}; + +/* + * These tables are optional and may be used to adjust memory timing settings + */ +#include "mm.h" +#include "mn.h" + +// Customer table +UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] = +{ + // Hardcoded Memory Training Values + + // The following macro should be used to override training values for your platform + // + // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), + // + // NOTE: + // The following training hardcode values are example values that were taken from a tilapia motherboard + // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in + // the table and replace the byte lane values with your own. + // + // ------------------ BYTE LANES ---------------------- + // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC + // Write Data Timing + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 + + // DQS Receiver Enable + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 + + // Write DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 + + // Read DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 + //-------------------------------------------------------------------------------------------------------------------------------------------------- + // TABLE END + NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table +}; +UINT8 SizeOfTableTN = sizeof (AGESA_MEM_TABLE_TN) / sizeof (AGESA_MEM_TABLE_TN[0]); diff --git a/src/mainboard/hp/pavilion_m6_1035dx/cmos.layout b/src/mainboard/hp/pavilion_m6_1035dx/cmos.layout new file mode 100644 index 0000000..5520564 --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/cmos.layout @@ -0,0 +1,114 @@ +#***************************************************************************** +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#***************************************************************************** + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/hp/pavilion_m6_1035dx/devicetree.cb b/src/mainboard/hp/pavilion_m6_1035dx/devicetree.cb new file mode 100644 index 0000000..62b37e1 --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/devicetree.cb @@ -0,0 +1,90 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +chip northbridge/amd/agesa/family15tn/root_complex + + device cpu_cluster 0 on + chip cpu/amd/agesa/family15tn + device lapic 10 on end + end + end + + device domain 0 on + subsystemid 0x1022 0x1410 inherit + chip northbridge/amd/agesa/family15tn # CPU side of HT root complex + + chip northbridge/amd/agesa/family15tn # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x99XX + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIE SLOT0 x16 + device pci 3.0 off end + device pci 4.0 on end # PCIE MINI0 + device pci 5.0 on end # PCIE MINI1 + device pci 6.0 on end # PCIE Slot1 x1 + device pci 7.0 on end # LAN + device pci 8.0 off end # NB/SB Link P2P bridge + end #chip northbridge/amd/agesa/family15tn # PCI side of HT root complex + + chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus + device pci 10.0 on end # XHCI HC0 + device pci 10.1 on end # XHCI HC1 + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SMBUS + chip drivers/generic/generic #dimm 0 + device i2c 50 on end # 7-bit SPD address + end + chip drivers/generic/generic #dimm 1 + device i2c 51 on end # 7-bit SPD address + end + end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on end # LPC 0x439d + device pci 14.4 on end # PCI 0x4384 # PCI-b conflict with GPIO. + device pci 14.5 on end # USB 2 + device pci 14.6 off end # Gec + device pci 14.7 on end # SD + device pci 15.0 off end # PCIe 0 + device pci 15.1 off end # PCIe 1 + device pci 15.2 off end # PCIe 2 + device pci 15.3 off end # PCIe 3 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + register "gpp_configuration" = "4" + end #chip southbridge/amd/hudson + + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + + register "spdAddrLookup" = " + { + { {0xA0, 0x00}, {0xA2, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses + { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses + }" + + end #chip northbridge/amd/agesa/family15tn # CPU side of HT root complex + end #domain +end #chip northbridge/amd/agesa/family15tn/root_complex diff --git a/src/mainboard/hp/pavilion_m6_1035dx/dsdt.asl b/src/mainboard/hp/pavilion_m6_1035dx/dsdt.asl new file mode 100644 index 0000000..ef2ae6f --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/dsdt.asl @@ -0,0 +1,85 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "AMD ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Globals for the platform */ + #include "acpi/mainboard.asl" + + /* Describe the USB Overcurrent pins */ + #include "acpi/usb_oc.asl" + + /* PCI IRQ mapping for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/pcie.asl> + + /* Describe the processor tree (_PR) */ + #include <cpu/amd/agesa/family15tn/acpi/cpu.asl> + + /* Describe the supported Sleep States for this Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/sleepstates.asl> + + /* Describe the Sleep Methods (WAK, PTS, GTS, etc.) for this platform */ + #include "acpi/sleep.asl" + + Scope(_SB) { + /* global utility methods expected within the _SB scope */ + #include <arch/x86/acpi/globutil.asl> + + /* Describe IRQ Routing mapping for this platform (within the _SB scope) */ + #include "acpi/routing.asl" + + Device(PCI0) { + /* Describe the AMD Northbridge */ + #include <northbridge/amd/agesa/family15tn/acpi/northbridge.asl> + + /* Describe the AMD Fusion Controller Hub Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/fch.asl> + + } + + /* Describe PCI INT[A-H] for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/pci_int.asl> + + } /* End Scope(_SB) */ + + /* Describe SMBUS for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/smbus.asl> + + /* Define the General Purpose Events for the platform */ + #include "acpi/gpe.asl" + + /* Define the Thermal zones and methods for the platform */ + #include "acpi/thermal.asl" + + /* Define the System Indicators for the platform */ + #include "acpi/si.asl" + +} +/* End of ASL file */ diff --git a/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c b/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c new file mode 100644 index 0000000..bf76fe2 --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c @@ -0,0 +1,145 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#include <cpu/amd/amdfam14.h> +#include "agesawrapper.h" +#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) +#include "imc.h" +#endif + +/* Global variables for MB layouts and these will be shared by irqtable mptable + * and acpi_tables busnum is default. + */ +u8 bus_isa; +u8 bus_hudson[6]; +u32 apicid_hudson; + +/* + * Here you only need to set value in pci1234 for HT-IO that could be installed or not + * You may need to preset pci1234 for HTIO board, + * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + */ +u32 pci1234x[] = { + 0x0000ff0, +}; + +u32 bus_type[256]; +u32 sbdn_hudson; + +static u32 get_bus_conf_done = 0; + +#if CONFIG_HAVE_ACPI_RESUME +extern u8 acpi_slp_type; +#endif +void get_bus_conf(void) +{ + u32 apicid_base; + u32 status; + + device_t dev; + int i, j; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + + get_bus_conf_done = 1; + + /* + * This is the call to AmdInitLate. It is really in the wrong place, conceptually, + * but functionally within the coreboot model, this is the best place to make the + * call. The logically correct place to call AmdInitLate is after PCI scan is done, + * after the decision about S3 resume is made, and before the system tables are + * written into RAM. The routine that is responsible for writing the tables is + * "write_tables", called near the end of "main". There is no platform + * specific entry point between the S3 resume decision point and the call to + * "write_tables", and the next platform specific entry points are the calls to + * the ACPI table write functions. The first of ose would seem to be the right + * place, but other table write functions, e.g. the PIRQ table write function, are + * called before the ACPI tables are written. This routine is called at the beginning + * of each of the write functions called prior to the ACPI write functions, so this + * becomes the best place for this call. + */ +#if CONFIG_HAVE_ACPI_RESUME + if (acpi_slp_type != 3) { + status = agesawrapper_amdinitlate(); + if(status) { + printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status); + } + status = agesawrapper_amdS3Save(); + if (status) { + printk(BIOS_DEBUG, "agesawrapper_amds3save failed: %x \n", status); + } + } +#else + status = agesawrapper_amdinitlate(); + if (status) + printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status); +#endif + + sbdn_hudson = 0; + + memset(bus_hudson, 0, sizeof(bus_hudson)); + + for (i = 0; i < 256; i++) { + bus_type[i] = 0; /* default ISA bus. */ + } + + bus_type[0] = 1; /* pci */ + + bus_hudson[0] = (pci1234x[0] >> 16) & 0xff; + + /* Hudson */ + dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, 4)); + + if (dev) { + bus_hudson[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + for (j = bus_hudson[1]; j < bus_isa; j++) + bus_type[j] = 1; + } + + for (i = 0; i < 4; i++) { + dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, i)); + if (dev) { + bus_hudson[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + } + for (j = bus_hudson[2]; j < bus_isa; j++) + bus_type[j] = 1; + + /* I/O APICs: APIC ID Version State Address */ + bus_isa = 10; + apicid_base = CONFIG_MAX_CPUS; + apicid_hudson = apicid_base; + +#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) + /* AMD AGESA does not enable thermal zone, so we enable it here. */ + enable_imc_thermal_zone(); +#endif +} diff --git a/src/mainboard/hp/pavilion_m6_1035dx/irq_tables.c b/src/mainboard/hp/pavilion_m6_1035dx/irq_tables.c new file mode 100644 index 0000000..d5339ad --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/irq_tables.c @@ -0,0 +1,112 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdfam15.h> + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +extern u8 bus_isa; +extern u8 bus_hudson[6]; +extern unsigned long sbdn_hudson; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_hudson[0]; + pirq->rtr_devfn = ((sbdn_hudson + 0x14) << 3) | 4; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, bus_hudson[0], ((sbdn_hudson + 0x14) << 3) | 4, + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/hp/pavilion_m6_1035dx/mainboard.c b/src/mainboard/hp/pavilion_m6_1035dx/mainboard.c new file mode 100644 index 0000000..f41d010 --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/mainboard.c @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include "BiosCallOuts.h" +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include <arch/acpi.h> +#include <cpu/amd/agesa/s3_resume.h> +#include "agesawrapper.h" + +/************************************************* + * enable the dedicated function in parmer board. + *************************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); + /* + * The mainboard is the first place that we get control in ramstage. Check + * for S3 resume and call the approriate AGESA/CIMx resume functions. + */ +#if CONFIG_HAVE_ACPI_RESUME + acpi_slp_type = acpi_get_sleep_type(); + if (acpi_slp_type == 3) + agesawrapper_fchs3earlyrestore(); +#endif +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/hp/pavilion_m6_1035dx/mptable.c b/src/mainboard/hp/pavilion_m6_1035dx/mptable.c new file mode 100644 index 0000000..d106697 --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/mptable.c @@ -0,0 +1,206 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam15.h> +#include <arch/cpu.h> +#include <cpu/x86/lapic.h> +#include "southbridge/amd/agesa/hudson/hudson.h" /* pm_ioread() */ + +//-#define IO_APIC_ID CONFIG_MAX_PHYSICAL_CPUS + 1 +#define IO_APIC_ID CONFIG_MAX_CPUS +extern u8 bus_hudson[6]; + +extern u32 bus_type[256]; +extern u32 sbdn_hudson; +extern u32 apicid_hudson; + +u8 picr_data[0x54] = { + 0x1F,0x1f,0x1f,0x1F,0x1F,0x1F,0x1F,0x1F,0x0A,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x09,0x1F,0x1F,0x0B,0x1F,0x0B,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F +}; +u8 intr_data[0x54] = { + 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x10,0x11,0x12,0x13 +}; + +static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length) +{ + mc->mpc_length += length; + mc->mpc_entry_count++; +} + +static void my_smp_write_bus(struct mp_config_table *mc, + unsigned char id, const char *bustype) +{ + struct mpc_config_bus *mpc; + mpc = smp_next_mpc_entry(mc); + memset(mpc, '\0', sizeof(*mpc)); + mpc->mpc_type = MP_BUS; + mpc->mpc_busid = id; + memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype)); + smp_add_mpc_entry(mc, sizeof(*mpc)); +} + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + u32 dword; + u8 byte; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + memcpy(mc->mpc_oem, "AMD ", 8); + + smp_write_processors(mc); + + get_bus_conf(); + + //mptable_write_buses(mc, NULL, &bus_isa); + my_smp_write_bus(mc, 0, "PCI "); + my_smp_write_bus(mc, 1, "PCI "); + bus_isa = 0x02; + my_smp_write_bus(mc, bus_isa, "ISA "); + + /* I/O APICs: APIC ID Version State Address */ + + dword = 0; + dword = pm_ioread(0x34) & 0xF0; + dword |= (pm_ioread(0x35) & 0xFF) << 8; + dword |= (pm_ioread(0x36) & 0xFF) << 16; + dword |= (pm_ioread(0x37) & 0xFF) << 24; + /* Set IO APIC ID onto IO_APIC_ID */ + write32 (dword, 0x00); + write32 (dword + 0x10, IO_APIC_ID << 24); + apicid_hudson = IO_APIC_ID; + smp_write_ioapic(mc, apicid_hudson, 0x21, dword); + + /* PIC IRQ routine */ + for (byte = 0x0; byte < sizeof(picr_data); byte ++) { + outb(byte, 0xC00); + outb(picr_data[byte], 0xC01); + } + + /* APIC IRQ routine */ + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + mptable_add_isa_interrupts(mc, bus_isa, apicid_hudson, 0); + + /* PCI interrupts are level triggered, and are + * associated with a specific bus/device/function tuple. + */ +#define PCI_INT(bus, dev, int_sign, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), apicid_hudson, (pin)) + + /* Internal VGA */ + PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); + PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); + + /* SMBUS */ + PCI_INT(0x0, 0x14, 0x0, 0x10); + + /* HD Audio */ + PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]); + + /* USB */ + PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); + PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); + PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); + PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); + PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); + PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); + PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]); + + /* sata */ + PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]); + PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); + + /* on board NIC & Slot PCIE. */ + + /* PCI slots */ + /* PCI_SLOT 0. */ + PCI_INT(bus_hudson[1], 0x5, 0x0, 0x14); + PCI_INT(bus_hudson[1], 0x5, 0x1, 0x15); + PCI_INT(bus_hudson[1], 0x5, 0x2, 0x16); + PCI_INT(bus_hudson[1], 0x5, 0x3, 0x17); + + /* PCI_SLOT 1. */ + PCI_INT(bus_hudson[1], 0x6, 0x0, 0x15); + PCI_INT(bus_hudson[1], 0x6, 0x1, 0x16); + PCI_INT(bus_hudson[1], 0x6, 0x2, 0x17); + PCI_INT(bus_hudson[1], 0x6, 0x3, 0x14); + + /* PCI_SLOT 2. */ + PCI_INT(bus_hudson[1], 0x7, 0x0, 0x16); + PCI_INT(bus_hudson[1], 0x7, 0x1, 0x17); + PCI_INT(bus_hudson[1], 0x7, 0x2, 0x14); + PCI_INT(bus_hudson[1], 0x7, 0x3, 0x15); + + PCI_INT(bus_hudson[2], 0x0, 0x0, 0x12); + PCI_INT(bus_hudson[2], 0x0, 0x1, 0x13); + PCI_INT(bus_hudson[2], 0x0, 0x2, 0x14); + + /* PCIe Lan*/ + PCI_INT(0x0, 0x06, 0x0, 0x13); + + /* FCH PCIe PortA */ + PCI_INT(0x0, 0x15, 0x0, 0x10); + /* FCH PCIe PortB */ + PCI_INT(0x0, 0x15, 0x1, 0x11); + /* FCH PCIe PortC */ + PCI_INT(0x0, 0x15, 0x2, 0x12); + /* FCH PCIe PortD */ + PCI_INT(0x0, 0x15, 0x3, 0x13); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/hp/pavilion_m6_1035dx/romstage.c b/src/mainboard/hp/pavilion_m6_1035dx/romstage.c new file mode 100644 index 0000000..202442c --- /dev/null +++ b/src/mainboard/hp/pavilion_m6_1035dx/romstage.c @@ -0,0 +1,157 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <arch/stages.h> +#include <device/pnp_def.h> +#include <arch/cpu.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <console/loglevel.h> +#include "agesawrapper.h" +#include "cpu/x86/bist.h" +#include "cpu/x86/lapic.h" +#include "southbridge/amd/agesa/hudson/hudson.h" +#include "cpu/amd/agesa/s3_resume.h" +#include "src/drivers/pc80/i8254.c" +#include "src/drivers/pc80/i8259.c" +#include "cbmem.h" + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx); +void disable_cache_as_ram(void); + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + u32 val; +#if CONFIG_HAVE_ACPI_RESUME + void *resume_backup_memory; +#endif + val = agesawrapper_amdinitmmio(); + + hudson_lpc_port80(); + + if (!cpu_init_detectedx && boot_cpu()) { + post_code(0x30); + + post_code(0x31); + console_init(); + } + + /* Halt if there was a built in self test failure */ + post_code(0x34); + report_bist_failure(bist); + + /* Load MPB */ + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx); + + post_code(0x37); + printk(BIOS_DEBUG, "agesawrapper_amdinitreset "); + val = agesawrapper_amdinitreset(); + if(val) { + printk(BIOS_DEBUG, "agesawrapper_amdinitreset failed: %x \n", val); + } + + post_code(0x39); + + val = agesawrapper_amdinitearly (); + if(val) { + printk(BIOS_DEBUG, "agesawrapper_amdinitearly failed: %x \n", val); + } + printk(BIOS_DEBUG, "Got past agesawrapper_amdinitearly\n"); + +#if CONFIG_HAVE_ACPI_RESUME + if (!acpi_is_wakeup_early()) { /* Check for S3 resume */ +#endif + post_code(0x40); + val = agesawrapper_amdinitpost (); + if(val) { + printk(BIOS_DEBUG, "agesawrapper_amdinitpost failed: %x \n", val); + } + printk(BIOS_DEBUG, "Got past agesawrapper_amdinitpost\n"); + + post_code(0x41); + val = agesawrapper_amdinitenv (); + if(val) { + printk(BIOS_DEBUG, "agesawrapper_amdinitenv failed: %x \n", val); + } + printk(BIOS_DEBUG, "Got past agesawrapper_amdinitenv\n"); + disable_cache_as_ram(); +#if CONFIG_HAVE_ACPI_RESUME + } else { /* S3 detect */ + printk(BIOS_INFO, "S3 detected\n"); + + post_code(0x60); + printk(BIOS_DEBUG, "agesawrapper_amdinitresume "); + val = agesawrapper_amdinitresume(); + if (val) + printk(BIOS_DEBUG, "error level: %x \n", val); + else + printk(BIOS_DEBUG, "passed.\n"); + + printk(BIOS_DEBUG, "agesawrapper_amds3laterestore "); + val = agesawrapper_amds3laterestore (); + if (val) + printk(BIOS_DEBUG, "error level: %x \n", val); + else + printk(BIOS_DEBUG, "passed.\n"); + + post_code(0x61); + printk(BIOS_DEBUG, "Find resume memory location\n"); + resume_backup_memory = (void *)backup_resume(); + + post_code(0x62); + printk(BIOS_DEBUG, "Move CAR stack.\n"); + move_stack_high_mem(); + printk(BIOS_DEBUG, "stack moved to: 0x%x\n", (u32) (resume_backup_memory + HIGH_MEMORY_SAVE)); + + post_code(0x63); + disable_cache_as_ram(); + printk(BIOS_DEBUG, "CAR disabled.\n"); + set_resume_cache(); + + /* + * Copy the system memory that is in the ramstage area to the + * reserved area. + */ + if (resume_backup_memory) + memcpy(resume_backup_memory, (void *)(CONFIG_RAMBASE), HIGH_MEMORY_SAVE); + + printk(BIOS_DEBUG, "System memory saved. OK to load ramstage.\n"); + } +#endif + + /* Initialize i8259 pic */ + post_code(0x41); + setup_i8259 (); + + /* Initialize i8254 timers */ + post_code(0x42); + setup_i8254 (); + + post_code(0x50); + copy_and_run(); + + post_code(0x54); /* Should never see this post code. */ +}