Martin Roth has submitted this change and it was merged. ( https://review.coreboot.org/c/coreboot/+/35000 )
Change subject: mb/google/kahlee/treeya: Enable Synaptics touchpad and Synaptics touchscreen ......................................................................
mb/google/kahlee/treeya: Enable Synaptics touchpad and Synaptics touchscreen
BUG=b:139699619 TEST=emerge-grunt coreboot chromeos-bootimage flash bios image to DUT and make sure the touchpad and touchscreen can work
Signed-off-by: Peichao.Wang peichao.wang@bitland.corp-partner.google.com Change-Id: I002badd49e678e1c32c802352923ca51efb45cef Reviewed-on: https://review.coreboot.org/c/coreboot/+/35000 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Martin Roth martinroth@google.com --- M src/mainboard/google/kahlee/variants/treeya/devicetree.cb 1 file changed, 23 insertions(+), 0 deletions(-)
Approvals: build bot (Jenkins): Verified Martin Roth: Looks good to me, approved
diff --git a/src/mainboard/google/kahlee/variants/treeya/devicetree.cb b/src/mainboard/google/kahlee/variants/treeya/devicetree.cb index d73c47c..eb76e94 100644 --- a/src/mainboard/google/kahlee/variants/treeya/devicetree.cb +++ b/src/mainboard/google/kahlee/variants/treeya/devicetree.cb @@ -138,10 +138,33 @@ register "desc" = ""ELAN Touchpad"" register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)" register "wake" = "7" + register "probed" = "1" device i2c 15 on end end + chip drivers/i2c/hid + register "generic.hid" = ""PNP0C50"" + register "generic.desc" = ""Synaptics Touchpad"" + register "generic.irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_5)" + register "generic.wake" = "7" + register "generic.probed" = "1" + register "hid_desc_reg_offset" = "0x20" + device i2c 0x2c on end + end end device mmio 0xfedc5000 on + chip drivers/i2c/hid + register "generic.hid" = ""SYTS7817"" + register "generic.desc" = ""Synaptics Touchscreen"" + register "generic.irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_11)" + register "generic.probed" = "1" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" + register "generic.reset_delay_ms" = "45" + register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" + register "hid_desc_reg_offset" = "0x20" + device i2c 20 on end + end chip drivers/i2c/generic register "hid" = ""RAYD0001"" register "desc" = ""Raydium Touchscreen""