[coreboot-gerrit] Change in ...coreboot[master]: mb/*/{x201,ms2290}/mainboard.c: Remove superfluous ramstage code

[Arthur Heymans (Code Review)]

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33141

Change subject: mb/*/{x201,ms2290}/mainboard.c: Remove superfluous ramstage code
......................................................................

mb/*/{x201,ms2290}/mainboard.c: Remove superfluous ramstage code

Change-Id: I0270c50dea2a2ce6c8e6114ed708f06be9d33c0e
Signed-off-by: Arthur Heymans 
---
M src/mainboard/lenovo/x201/mainboard.c
M src/mainboard/packardbell/ms2290/mainboard.c
2 files changed, 0 insertions(+), 26 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/41/33141/1

diff --git a/src/mainboard/lenovo/x201/mainboard.c b/src/mainboard/lenovo/x201/mainboard.c
index 54acca3..ad878db 100644
--- a/src/mainboard/lenovo/x201/mainboard.c
+++ b/src/mainboard/lenovo/x201/mainboard.c
@@ -70,19 +70,6 @@
    dev->ops->init = mainboard_init;
    dev->ops->acpi_fill_ssdt_generator = fill_ssdt;

-	pmbase = pci_read_config32(pcidev_on_root(0x1f, 0),
-				   PMBASE) & 0xff80;
-
-	printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase);
-
-	outl(0, pmbase + SMI_EN);
-
-	enable_lapic();
-	pci_write_config32(pcidev_on_root(0x1f, 0), GPIO_BASE,
-			   DEFAULT_GPIOBASE | 1);
-	pci_write_config8(pcidev_on_root(0x1f, 0), GPIO_CNTL,
-			  0x10);
-
    /* If we're resuming from suspend, blink suspend LED */
    if (acpi_is_wakeup_s3())
    	ec_write(0x0c, 0xc7);
diff --git a/src/mainboard/packardbell/ms2290/mainboard.c b/src/mainboard/packardbell/ms2290/mainboard.c
index 28d3bb0..d532a48 100644
--- a/src/mainboard/packardbell/ms2290/mainboard.c
+++ b/src/mainboard/packardbell/ms2290/mainboard.c
@@ -83,19 +83,6 @@
    for (i = 0; i < 256; i++)
    	ec_write (i, dmp[i]);

-	pmbase = pci_read_config32(pcidev_on_root(0x1f, 0),
-				   PMBASE) & 0xff80;
-
-	printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase);
-
-	outl(0, pmbase + SMI_EN);
-
-	enable_lapic();
-	pci_write_config32(pcidev_on_root(0x1f, 0), GPIO_BASE,
-			   DEFAULT_GPIOBASE | 1);
-	pci_write_config8(pcidev_on_root(0x1f, 0), GPIO_CNTL,
-			  0x10);
-
    install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_LFP, 2);

/* This sneaked in here, because EasyNote has no SuperIO chip.