Subrata Banik has submitted this change. ( https://review.coreboot.org/c/coreboot/+/45809 )
Change subject: soc/intel: Move soc_pch_pirq_init() to common code ......................................................................
soc/intel: Move soc_pch_pirq_init() to common code
List of changes: 1. Rename soc_pch_pirq_init() as pch_pirq_init() and move into common block code. 2. Remove redundant LPC functions from SoC directory and refer from block/lpc directory.
TEST=Able to build and boot hatch and tglrvp platform without seeing any functional impact.
Change-Id: I856b5ca024e58fd14b4d1721f23d9516a283ebf8 Signed-off-by: Subrata Banik subrata.banik@intel.com Reviewed-on: https://review.coreboot.org/c/coreboot/+/45809 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Angel Pons th3fanbus@gmail.com --- M src/soc/intel/cannonlake/acpi/pci_irqs.asl M src/soc/intel/cannonlake/lpc.c M src/soc/intel/common/block/include/intelblocks/lpc_lib.h M src/soc/intel/common/block/lpc/lpc_lib.c M src/soc/intel/elkhartlake/espi.c M src/soc/intel/icelake/espi.c M src/soc/intel/jasperlake/espi.c M src/soc/intel/skylake/irq.c M src/soc/intel/skylake/lpc.c M src/soc/intel/tigerlake/espi.c 10 files changed, 79 insertions(+), 418 deletions(-)
Approvals: build bot (Jenkins): Verified Angel Pons: Looks good to me, approved
diff --git a/src/soc/intel/cannonlake/acpi/pci_irqs.asl b/src/soc/intel/cannonlake/acpi/pci_irqs.asl index d35f4d7..17e3aa5 100644 --- a/src/soc/intel/cannonlake/acpi/pci_irqs.asl +++ b/src/soc/intel/cannonlake/acpi/pci_irqs.asl @@ -76,7 +76,7 @@
Name (PICN, Package () { /* - * If the setting change in soc_pch_pirq_init(), then + * If the setting change in pch_pirq_init(), then * please make the same static IRQ changes here as well. */ /* D31: cAVS, SMBus, GbE, Nothpeak */ diff --git a/src/soc/intel/cannonlake/lpc.c b/src/soc/intel/cannonlake/lpc.c index 9d36f32..e220678 100644 --- a/src/soc/intel/cannonlake/lpc.c +++ b/src/soc/intel/cannonlake/lpc.c @@ -90,74 +90,6 @@ soc_setup_dmi_pcr_io_dec(&io_dec_arr[0]); }
-/* - * PIRQ[n]_ROUT[3:0] - PIRQ Routing Control - * 0x00 - 0000 = Reserved - * 0x01 - 0001 = Reserved - * 0x02 - 0010 = Reserved - * 0x03 - 0011 = IRQ3 - * 0x04 - 0100 = IRQ4 - * 0x05 - 0101 = IRQ5 - * 0x06 - 0110 = IRQ6 - * 0x07 - 0111 = IRQ7 - * 0x08 - 1000 = Reserved - * 0x09 - 1001 = IRQ9 - * 0x0A - 1010 = IRQ10 - * 0x0B - 1011 = IRQ11 - * 0x0C - 1100 = IRQ12 - * 0x0D - 1101 = Reserved - * 0x0E - 1110 = IRQ14 - * 0x0F - 1111 = IRQ15 - * PIRQ[n]_ROUT[7] - PIRQ Routing Control - * 0x80 - The PIRQ is not routed. - */ - -void soc_pch_pirq_init(const struct device *dev) -{ - struct device *irq_dev; - uint8_t pch_interrupt_routing[MAX_PXRC_CONFIG]; - - pch_interrupt_routing[0] = PCH_IRQ11; - pch_interrupt_routing[1] = PCH_IRQ10; - pch_interrupt_routing[2] = PCH_IRQ11; - pch_interrupt_routing[3] = PCH_IRQ11; - pch_interrupt_routing[4] = PCH_IRQ11; - pch_interrupt_routing[5] = PCH_IRQ11; - pch_interrupt_routing[6] = PCH_IRQ11; - pch_interrupt_routing[7] = PCH_IRQ11; - - itss_irq_init(pch_interrupt_routing); - - for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { - u8 int_pin = 0, int_line = 0; - - if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) - continue; - - int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); - - switch (int_pin) { - case 1: /* INTA# */ - int_line = PCH_IRQ11; - break; - case 2: /* INTB# */ - int_line = PCH_IRQ10; - break; - case 3: /* INTC# */ - int_line = PCH_IRQ11; - break; - case 4: /* INTD# */ - int_line = PCH_IRQ11; - break; - } - - if (!int_line) - continue; - - pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); - } -} - static void pch_misc_init(void) { uint8_t reg8; @@ -186,7 +118,7 @@
/* Interrupt configuration */ pch_enable_ioapic(); - soc_pch_pirq_init(dev); + pch_pirq_init(); setup_i8259(); i8259_configure_irq_trigger(9, 1); soc_mirror_dmi_pcr_io_dec(); diff --git a/src/soc/intel/common/block/include/intelblocks/lpc_lib.h b/src/soc/intel/common/block/include/intelblocks/lpc_lib.h index 5bbc384..52b0ff8 100644 --- a/src/soc/intel/common/block/include/intelblocks/lpc_lib.h +++ b/src/soc/intel/common/block/include/intelblocks/lpc_lib.h @@ -97,8 +97,6 @@ void lpc_io_setup_comm_a_b(void); /* Enable PCH LPC by setting up generic decode range registers. */ void pch_enable_lpc(void); -/* Retrieve and setup SoC specific PCH LPC interrupt routing. */ -void soc_pch_pirq_init(const struct device *dev); /* Get SoC's generic IO decoder range register settings. */ void soc_get_gen_io_dec_range(const struct device *dev, uint32_t gen_io_dec[LPC_NUM_GENERIC_IO_RANGES]); @@ -109,5 +107,7 @@ uintptr_t base, size_t size, unsigned long flags); /* Enable PCH IOAPIC */ void pch_enable_ioapic(void); +/* Retrieve and setup PCH LPC interrupt routing. */ +void pch_pirq_init(void);
#endif /* _SOC_COMMON_BLOCK_LPC_LIB_H_ */ diff --git a/src/soc/intel/common/block/lpc/lpc_lib.c b/src/soc/intel/common/block/lpc/lpc_lib.c index 87ee110..d189a5e 100644 --- a/src/soc/intel/common/block/lpc/lpc_lib.c +++ b/src/soc/intel/common/block/lpc/lpc_lib.c @@ -7,9 +7,11 @@ #include <console/console.h> #include <device/pci.h> #include <device/pci_ops.h> +#include <intelblocks/itss.h> #include <intelblocks/lpc_lib.h> #include <lib.h> #include "lpc_def.h" +#include <soc/irq.h> #include <soc/pci_devs.h>
uint16_t lpc_enable_fixed_io_ranges(uint16_t io_enables) @@ -280,7 +282,7 @@ lpc_set_gen_decode_range(gen_io_dec); soc_setup_dmi_pcr_io_dec(gen_io_dec); if (ENV_PAYLOAD_LOADER) - soc_pch_pirq_init(dev); + pch_pirq_init(); }
void lpc_enable_pci_clk_cntl(void) @@ -317,3 +319,70 @@ */ io_apic_write((void *)IO_APIC_ADDR, 0x03, 0x01); } + +/* + * PIRQ[n]_ROUT[3:0] - PIRQ Routing Control + * 0x00 - 0000 = Reserved + * 0x01 - 0001 = Reserved + * 0x02 - 0010 = Reserved + * 0x03 - 0011 = IRQ3 + * 0x04 - 0100 = IRQ4 + * 0x05 - 0101 = IRQ5 + * 0x06 - 0110 = IRQ6 + * 0x07 - 0111 = IRQ7 + * 0x08 - 1000 = Reserved + * 0x09 - 1001 = IRQ9 + * 0x0A - 1010 = IRQ10 + * 0x0B - 1011 = IRQ11 + * 0x0C - 1100 = IRQ12 + * 0x0D - 1101 = Reserved + * 0x0E - 1110 = IRQ14 + * 0x0F - 1111 = IRQ15 + * PIRQ[n]_ROUT[7] - PIRQ Routing Control + * 0x80 - The PIRQ is not routed. + */ +void pch_pirq_init(void) +{ + const struct device *irq_dev; + uint8_t pch_interrupt_routing[MAX_PXRC_CONFIG]; + + pch_interrupt_routing[0] = PCH_IRQ11; + pch_interrupt_routing[1] = PCH_IRQ10; + pch_interrupt_routing[2] = PCH_IRQ11; + pch_interrupt_routing[3] = PCH_IRQ11; + pch_interrupt_routing[4] = PCH_IRQ11; + pch_interrupt_routing[5] = PCH_IRQ11; + pch_interrupt_routing[6] = PCH_IRQ11; + pch_interrupt_routing[7] = PCH_IRQ11; + + itss_irq_init(pch_interrupt_routing); + + for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { + uint8_t int_pin = 0, int_line = 0; + + if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) + continue; + + int_pin = pci_read_config8(PCI_BDF(irq_dev), PCI_INTERRUPT_PIN); + + switch (int_pin) { + case 1: /* INTA# */ + int_line = PCH_IRQ11; + break; + case 2: /* INTB# */ + int_line = PCH_IRQ10; + break; + case 3: /* INTC# */ + int_line = PCH_IRQ11; + break; + case 4: /* INTD# */ + int_line = PCH_IRQ11; + break; + } + + if (!int_line) + continue; + + pci_write_config8(PCI_BDF(irq_dev), PCI_INTERRUPT_LINE, int_line); + } +} diff --git a/src/soc/intel/elkhartlake/espi.c b/src/soc/intel/elkhartlake/espi.c index 2412623..6e6f887 100644 --- a/src/soc/intel/elkhartlake/espi.c +++ b/src/soc/intel/elkhartlake/espi.c @@ -64,74 +64,6 @@ soc_setup_dmi_pcr_io_dec(&io_dec_arr[0]); }
-/* - * PIRQ[n]_ROUT[3:0] - PIRQ Routing Control - * 0x00 - 0000 = Reserved - * 0x01 - 0001 = Reserved - * 0x02 - 0010 = Reserved - * 0x03 - 0011 = IRQ3 - * 0x04 - 0100 = IRQ4 - * 0x05 - 0101 = IRQ5 - * 0x06 - 0110 = IRQ6 - * 0x07 - 0111 = IRQ7 - * 0x08 - 1000 = Reserved - * 0x09 - 1001 = IRQ9 - * 0x0A - 1010 = IRQ10 - * 0x0B - 1011 = IRQ11 - * 0x0C - 1100 = IRQ12 - * 0x0D - 1101 = Reserved - * 0x0E - 1110 = IRQ14 - * 0x0F - 1111 = IRQ15 - * PIRQ[n]_ROUT[7] - PIRQ Routing Control - * 0x80 - The PIRQ is not routed. - */ - -void soc_pch_pirq_init(const struct device *dev) -{ - struct device *irq_dev; - uint8_t pch_interrupt_routing[MAX_PXRC_CONFIG]; - - pch_interrupt_routing[0] = PCH_IRQ11; - pch_interrupt_routing[1] = PCH_IRQ10; - pch_interrupt_routing[2] = PCH_IRQ11; - pch_interrupt_routing[3] = PCH_IRQ11; - pch_interrupt_routing[4] = PCH_IRQ11; - pch_interrupt_routing[5] = PCH_IRQ11; - pch_interrupt_routing[6] = PCH_IRQ11; - pch_interrupt_routing[7] = PCH_IRQ11; - - itss_irq_init(pch_interrupt_routing); - - for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { - uint8_t int_pin = 0, int_line = 0; - - if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) - continue; - - int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); - - switch (int_pin) { - case 1: /* INTA# */ - int_line = PCH_IRQ11; - break; - case 2: /* INTB# */ - int_line = PCH_IRQ10; - break; - case 3: /* INTC# */ - int_line = PCH_IRQ11; - break; - case 4: /* INTD# */ - int_line = PCH_IRQ11; - break; - } - - if (!int_line) - continue; - - pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); - } -} - static void pch_misc_init(void) { uint8_t reg8; @@ -161,7 +93,7 @@
/* Interrupt configuration */ pch_enable_ioapic(); - soc_pch_pirq_init(dev); + pch_pirq_init(); setup_i8259(); i8259_configure_irq_trigger(9, 1); soc_mirror_dmi_pcr_io_dec(); diff --git a/src/soc/intel/icelake/espi.c b/src/soc/intel/icelake/espi.c index bf5c50d..388d9fa 100644 --- a/src/soc/intel/icelake/espi.c +++ b/src/soc/intel/icelake/espi.c @@ -83,74 +83,6 @@ soc_setup_dmi_pcr_io_dec(&io_dec_arr[0]); }
-/* - * PIRQ[n]_ROUT[3:0] - PIRQ Routing Control - * 0x00 - 0000 = Reserved - * 0x01 - 0001 = Reserved - * 0x02 - 0010 = Reserved - * 0x03 - 0011 = IRQ3 - * 0x04 - 0100 = IRQ4 - * 0x05 - 0101 = IRQ5 - * 0x06 - 0110 = IRQ6 - * 0x07 - 0111 = IRQ7 - * 0x08 - 1000 = Reserved - * 0x09 - 1001 = IRQ9 - * 0x0A - 1010 = IRQ10 - * 0x0B - 1011 = IRQ11 - * 0x0C - 1100 = IRQ12 - * 0x0D - 1101 = Reserved - * 0x0E - 1110 = IRQ14 - * 0x0F - 1111 = IRQ15 - * PIRQ[n]_ROUT[7] - PIRQ Routing Control - * 0x80 - The PIRQ is not routed. - */ - -void soc_pch_pirq_init(const struct device *dev) -{ - struct device *irq_dev; - uint8_t pch_interrupt_routing[MAX_PXRC_CONFIG]; - - pch_interrupt_routing[0] = PCH_IRQ11; - pch_interrupt_routing[1] = PCH_IRQ10; - pch_interrupt_routing[2] = PCH_IRQ11; - pch_interrupt_routing[3] = PCH_IRQ11; - pch_interrupt_routing[4] = PCH_IRQ11; - pch_interrupt_routing[5] = PCH_IRQ11; - pch_interrupt_routing[6] = PCH_IRQ11; - pch_interrupt_routing[7] = PCH_IRQ11; - - itss_irq_init(pch_interrupt_routing); - - for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { - u8 int_pin = 0, int_line = 0; - - if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) - continue; - - int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); - - switch (int_pin) { - case 1: /* INTA# */ - int_line = PCH_IRQ11; - break; - case 2: /* INTB# */ - int_line = PCH_IRQ10; - break; - case 3: /* INTC# */ - int_line = PCH_IRQ11; - break; - case 4: /* INTD# */ - int_line = PCH_IRQ11; - break; - } - - if (!int_line) - continue; - - pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); - } -} - static void pch_misc_init(void) { uint8_t reg8; @@ -180,7 +112,7 @@
/* Interrupt configuration */ pch_enable_ioapic(); - soc_pch_pirq_init(dev); + pch_pirq_init(); setup_i8259(); i8259_configure_irq_trigger(9, 1); soc_mirror_dmi_pcr_io_dec(); diff --git a/src/soc/intel/jasperlake/espi.c b/src/soc/intel/jasperlake/espi.c index 24b5057..ef1ed95 100644 --- a/src/soc/intel/jasperlake/espi.c +++ b/src/soc/intel/jasperlake/espi.c @@ -65,74 +65,6 @@ soc_setup_dmi_pcr_io_dec(&io_dec_arr[0]); }
-/* - * PIRQ[n]_ROUT[3:0] - PIRQ Routing Control - * 0x00 - 0000 = Reserved - * 0x01 - 0001 = Reserved - * 0x02 - 0010 = Reserved - * 0x03 - 0011 = IRQ3 - * 0x04 - 0100 = IRQ4 - * 0x05 - 0101 = IRQ5 - * 0x06 - 0110 = IRQ6 - * 0x07 - 0111 = IRQ7 - * 0x08 - 1000 = Reserved - * 0x09 - 1001 = IRQ9 - * 0x0A - 1010 = IRQ10 - * 0x0B - 1011 = IRQ11 - * 0x0C - 1100 = IRQ12 - * 0x0D - 1101 = Reserved - * 0x0E - 1110 = IRQ14 - * 0x0F - 1111 = IRQ15 - * PIRQ[n]_ROUT[7] - PIRQ Routing Control - * 0x80 - The PIRQ is not routed. - */ - -void soc_pch_pirq_init(const struct device *dev) -{ - struct device *irq_dev; - uint8_t pch_interrupt_routing[MAX_PXRC_CONFIG]; - - pch_interrupt_routing[0] = PCH_IRQ11; - pch_interrupt_routing[1] = PCH_IRQ10; - pch_interrupt_routing[2] = PCH_IRQ11; - pch_interrupt_routing[3] = PCH_IRQ11; - pch_interrupt_routing[4] = PCH_IRQ11; - pch_interrupt_routing[5] = PCH_IRQ11; - pch_interrupt_routing[6] = PCH_IRQ11; - pch_interrupt_routing[7] = PCH_IRQ11; - - itss_irq_init(pch_interrupt_routing); - - for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { - u8 int_pin = 0, int_line = 0; - - if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) - continue; - - int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); - - switch (int_pin) { - case 1: /* INTA# */ - int_line = PCH_IRQ11; - break; - case 2: /* INTB# */ - int_line = PCH_IRQ10; - break; - case 3: /* INTC# */ - int_line = PCH_IRQ11; - break; - case 4: /* INTD# */ - int_line = PCH_IRQ11; - break; - } - - if (!int_line) - continue; - - pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); - } -} - static void pch_misc_init(void) { uint8_t reg8; @@ -162,7 +94,7 @@
/* Interrupt configuration */ pch_enable_ioapic(); - soc_pch_pirq_init(dev); + pch_pirq_init(); setup_i8259(); i8259_configure_irq_trigger(9, 1); soc_mirror_dmi_pcr_io_dec(); diff --git a/src/soc/intel/skylake/irq.c b/src/soc/intel/skylake/irq.c index 62050c9..ad75f02 100644 --- a/src/soc/intel/skylake/irq.c +++ b/src/soc/intel/skylake/irq.c @@ -215,71 +215,3 @@ /* TCO Irq enable/disable */ params->TcoIrqEnable = config->TcoIrqEnable; } - -/* - * PIRQ[n]_ROUT[3:0] - PIRQ Routing Control - * 0x00 - 0000 = Reserved - * 0x01 - 0001 = Reserved - * 0x02 - 0010 = Reserved - * 0x03 - 0011 = IRQ3 - * 0x04 - 0100 = IRQ4 - * 0x05 - 0101 = IRQ5 - * 0x06 - 0110 = IRQ6 - * 0x07 - 0111 = IRQ7 - * 0x08 - 1000 = Reserved - * 0x09 - 1001 = IRQ9 - * 0x0A - 1010 = IRQ10 - * 0x0B - 1011 = IRQ11 - * 0x0C - 1100 = IRQ12 - * 0x0D - 1101 = Reserved - * 0x0E - 1110 = IRQ14 - * 0x0F - 1111 = IRQ15 - * PIRQ[n]_ROUT[7] - PIRQ Routing Control - * 0x80 - The PIRQ is not routed. - */ - -void soc_pch_pirq_init(const struct device *dev) -{ - uint8_t pch_interrupt_routing[MAX_PXRC_CONFIG]; - struct device *irq_dev; - - pch_interrupt_routing[0] = PCH_IRQ11; - pch_interrupt_routing[1] = PCH_IRQ10; - pch_interrupt_routing[2] = PCH_IRQ11; - pch_interrupt_routing[3] = PCH_IRQ11; - pch_interrupt_routing[4] = PCH_IRQ11; - pch_interrupt_routing[5] = PCH_IRQ11; - pch_interrupt_routing[6] = PCH_IRQ11; - pch_interrupt_routing[7] = PCH_IRQ11; - - itss_irq_init(pch_interrupt_routing); - - for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { - u8 int_pin = 0, int_line = 0; - - if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) - continue; - - int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); - - switch (int_pin) { - case 1: /* INTA# */ - int_line = PCH_IRQ11; - break; - case 2: /* INTB# */ - int_line = PCH_IRQ10; - break; - case 3: /* INTC# */ - int_line = PCH_IRQ11; - break; - case 4: /* INTD# */ - int_line = PCH_IRQ11; - break; - } - - if (!int_line) - continue; - - pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); - } -} diff --git a/src/soc/intel/skylake/lpc.c b/src/soc/intel/skylake/lpc.c index e514e1a..0eaeb9f 100644 --- a/src/soc/intel/skylake/lpc.c +++ b/src/soc/intel/skylake/lpc.c @@ -74,7 +74,7 @@
/* Interrupt configuration */ pch_enable_ioapic(); - soc_pch_pirq_init(dev); + pch_pirq_init(); setup_i8259(); i8259_configure_irq_trigger(9, 1); } diff --git a/src/soc/intel/tigerlake/espi.c b/src/soc/intel/tigerlake/espi.c index eb44a6a..668e95f 100644 --- a/src/soc/intel/tigerlake/espi.c +++ b/src/soc/intel/tigerlake/espi.c @@ -71,74 +71,6 @@ soc_setup_dmi_pcr_io_dec(&io_dec_arr[0]); }
-/* - * PIRQ[n]_ROUT[3:0] - PIRQ Routing Control - * 0x00 - 0000 = Reserved - * 0x01 - 0001 = Reserved - * 0x02 - 0010 = Reserved - * 0x03 - 0011 = IRQ3 - * 0x04 - 0100 = IRQ4 - * 0x05 - 0101 = IRQ5 - * 0x06 - 0110 = IRQ6 - * 0x07 - 0111 = IRQ7 - * 0x08 - 1000 = Reserved - * 0x09 - 1001 = IRQ9 - * 0x0A - 1010 = IRQ10 - * 0x0B - 1011 = IRQ11 - * 0x0C - 1100 = IRQ12 - * 0x0D - 1101 = Reserved - * 0x0E - 1110 = IRQ14 - * 0x0F - 1111 = IRQ15 - * PIRQ[n]_ROUT[7] - PIRQ Routing Control - * 0x80 - The PIRQ is not routed. - */ - -void soc_pch_pirq_init(const struct device *dev) -{ - struct device *irq_dev; - uint8_t pch_interrupt_routing[MAX_PXRC_CONFIG]; - - pch_interrupt_routing[0] = PCH_IRQ11; - pch_interrupt_routing[1] = PCH_IRQ10; - pch_interrupt_routing[2] = PCH_IRQ11; - pch_interrupt_routing[3] = PCH_IRQ11; - pch_interrupt_routing[4] = PCH_IRQ11; - pch_interrupt_routing[5] = PCH_IRQ11; - pch_interrupt_routing[6] = PCH_IRQ11; - pch_interrupt_routing[7] = PCH_IRQ11; - - itss_irq_init(pch_interrupt_routing); - - for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { - u8 int_pin = 0, int_line = 0; - - if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) - continue; - - int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); - - switch (int_pin) { - case 1: /* INTA# */ - int_line = PCH_IRQ11; - break; - case 2: /* INTB# */ - int_line = PCH_IRQ10; - break; - case 3: /* INTC# */ - int_line = PCH_IRQ11; - break; - case 4: /* INTD# */ - int_line = PCH_IRQ11; - break; - } - - if (!int_line) - continue; - - pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); - } -} - static void pch_misc_init(void) { uint8_t reg8; @@ -168,7 +100,7 @@
/* Interrupt configuration */ pch_enable_ioapic(); - soc_pch_pirq_init(dev); + pch_pirq_init(); setup_i8259(); i8259_configure_irq_trigger(9, 1); soc_mirror_dmi_pcr_io_dec();