Jonathan Neuschäfer has uploaded this change for review. ( https://review.coreboot.org/28624
Change subject: README: Convert to Markdown ......................................................................
README: Convert to Markdown
Markdown allows easy conversion to HTML, so this change should make the GitHub mirror look a little better.
Change-Id: I1a9fde648b8960c01b69fc682f0908c5243d2013 Signed-off-by: Jonathan Neuschäfer j.neuschaefer@gmx.net --- R README.md 1 file changed, 10 insertions(+), 11 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/24/28624/1
diff --git a/README b/README.md similarity index 80% rename from README rename to README.md index 651aa61..b13ace5 100644 --- a/README +++ b/README.md @@ -1,6 +1,5 @@ -------------------------------------------------------------------------------- coreboot README -------------------------------------------------------------------------------- +===============
coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of @@ -24,7 +23,7 @@ After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.
-See https://www.coreboot.org/Payloads for a list of supported payloads. +See https://www.coreboot.org/Payloads for a list of supported payloads.
Supported Hardware @@ -34,8 +33,8 @@
For details please consult:
- * https://www.coreboot.org/Supported_Motherboards - * https://www.coreboot.org/Supported_Chipsets_and_Devices + * https://www.coreboot.org/Supported_Motherboards + * https://www.coreboot.org/Supported_Chipsets_and_Devices
Build Requirements @@ -48,7 +47,7 @@ to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the - ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this + `ANY_TOOLCHAIN` Kconfig option if you're feeling lucky (no support in this case). * iasl (for targets with ACPI support) * pkg-config @@ -58,14 +57,14 @@
* doxygen (for generating/viewing documentation) * gdb (for better debugging facilities on some targets) - * ncurses (for 'make menuconfig' and 'make nconfig') + * ncurses (for `make menuconfig` and `make nconfig`) * flex and bison (for regenerating parsers)
Building coreboot -----------------
-Please consult https://www.coreboot.org/Build_HOWTO for details. +Please consult https://www.coreboot.org/Build_HOWTO for details.
Testing coreboot Without Modifying Your Hardware @@ -75,7 +74,7 @@ to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.
-Please see https://www.coreboot.org/QEMU for details. +Please see https://www.coreboot.org/QEMU for details.
Website and Mailing List @@ -84,11 +83,11 @@ Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:
- https://www.coreboot.org + https://www.coreboot.org
You can contact us directly on the coreboot mailing list:
- https://www.coreboot.org/Mailinglist + https://www.coreboot.org/Mailinglist
Copyright and License