Gabe Black (gabeblack@chromium.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/3642
-gerrit
commit 884f0c3745cd49828e3f2358452e005721bebe4b Author: Stefan Reinauer reinauer@chromium.org Date: Tue May 14 16:57:50 2013 -0700
ARMv7: De-uboot-ify Exynos5250 code.
When starting the Exynos5250 port, a lot of unneeded u-boot code was imported. This is an attempt to get rid of a lot of unneeded code before the port is used as a basis for further ARM ports.
There is a lot more that can be done, including cleaning up the 5250's Kconfig file.
Change-Id: I2d88676c436eea4b21bcb62f40018af9fabb3016 Signed-off-by: Stefan Reinauer reinauer@google.com Signed-off-by: Gabe Black gabeblack@chromium.org --- src/arch/armv7/bootblock_simple.c | 2 +- src/arch/armv7/include/arch/cache.h | 2 + src/arch/armv7/include/arch/cpu.h | 2 +- src/arch/armv7/include/arch/gpio.h | 98 ----- src/arch/armv7/include/arch/io.h | 190 +------- src/arch/armv7/include/arch/pci_ops.h | 35 +- src/arch/armv7/include/common.h | 432 ------------------ src/arch/armv7/lib/eabi_compat.c | 1 - src/arch/armv7/lib/interrupts.c | 1 - src/arch/armv7/stages.c | 1 - src/cpu/armltd/cortex-a9/cache.c | 1 - src/cpu/samsung/exynos5250/Kconfig | 4 - src/cpu/samsung/exynos5250/Makefile.inc | 16 +- src/cpu/samsung/exynos5250/adc.h | 42 -- src/cpu/samsung/exynos5250/bootblock.c | 2 +- src/cpu/samsung/exynos5250/clk.h | 90 ++-- src/cpu/samsung/exynos5250/clock.c | 71 +-- src/cpu/samsung/exynos5250/clock.h | 94 ---- src/cpu/samsung/exynos5250/clock_init.c | 31 +- src/cpu/samsung/exynos5250/clock_init.h | 60 --- src/cpu/samsung/exynos5250/cpu.c | 56 ++- src/cpu/samsung/exynos5250/cpu.h | 105 +---- src/cpu/samsung/exynos5250/cpu_info.c | 64 --- src/cpu/samsung/exynos5250/dmc.h | 21 +- src/cpu/samsung/exynos5250/dmc_common.c | 29 +- src/cpu/samsung/exynos5250/dmc_init_ddr3.c | 23 +- src/cpu/samsung/exynos5250/dp-core.h | 268 ++++++++++++ src/cpu/samsung/exynos5250/dp-reg.c | 495 +++++++++++++++++++++ src/cpu/samsung/exynos5250/dp.h | 497 +++++++++++++++++++++ src/cpu/samsung/exynos5250/dsim.h | 21 +- src/cpu/samsung/exynos5250/exynos-cpufreq.h | 54 --- src/cpu/samsung/exynos5250/exynos-fb.c | 606 -------------------------- src/cpu/samsung/exynos5250/exynos-tmu.c | 195 --------- src/cpu/samsung/exynos5250/exynos-tmu.h | 132 ------ src/cpu/samsung/exynos5250/exynos5-common.h | 45 -- src/cpu/samsung/exynos5250/exynos5250-tmu.c | 45 -- src/cpu/samsung/exynos5250/fb.c | 597 +++++++++++++++++++++++++ src/cpu/samsung/exynos5250/fet.h | 25 -- src/cpu/samsung/exynos5250/fimd.h | 21 +- src/cpu/samsung/exynos5250/gpio.c | 156 +------ src/cpu/samsung/exynos5250/gpio.h | 236 ++++------ src/cpu/samsung/exynos5250/i2c.c | 29 +- src/cpu/samsung/exynos5250/i2c.h | 24 +- src/cpu/samsung/exynos5250/i2s-regs.h | 26 +- src/cpu/samsung/exynos5250/lowlevel_init_c.c | 133 ------ src/cpu/samsung/exynos5250/mct.c | 20 +- src/cpu/samsung/exynos5250/monotonic_timer.c | 2 +- src/cpu/samsung/exynos5250/periph.h | 20 +- src/cpu/samsung/exynos5250/pinmux.c | 37 +- src/cpu/samsung/exynos5250/pinmux.h | 22 +- src/cpu/samsung/exynos5250/power.c | 29 +- src/cpu/samsung/exynos5250/power.h | 35 +- src/cpu/samsung/exynos5250/pwm.c | 28 +- src/cpu/samsung/exynos5250/pwm.h | 20 +- src/cpu/samsung/exynos5250/reset.c | 18 +- src/cpu/samsung/exynos5250/s5p-dp-core.h | 259 ----------- src/cpu/samsung/exynos5250/s5p-dp-reg.c | 486 --------------------- src/cpu/samsung/exynos5250/s5p-dp.h | 514 ---------------------- src/cpu/samsung/exynos5250/sata.c | 431 ------------------ src/cpu/samsung/exynos5250/sata.h | 27 -- src/cpu/samsung/exynos5250/setup.h | 24 +- src/cpu/samsung/exynos5250/soc.c | 47 -- src/cpu/samsung/exynos5250/spi.c | 31 +- src/cpu/samsung/exynos5250/spi.h | 23 +- src/cpu/samsung/exynos5250/sromc.c | 49 --- src/cpu/samsung/exynos5250/sromc.h | 69 --- src/cpu/samsung/exynos5250/sysreg.h | 21 +- src/cpu/samsung/exynos5250/timer.c | 84 +--- src/cpu/samsung/exynos5250/timer.h | 25 ++ src/cpu/samsung/exynos5250/tmu.c | 215 +++++++++ src/cpu/samsung/exynos5250/tmu.h | 134 ++++++ src/cpu/samsung/exynos5250/tzpc.h | 52 --- src/cpu/samsung/exynos5250/tzpc_init.c | 57 --- src/cpu/samsung/exynos5250/uart.c | 58 +-- src/cpu/samsung/exynos5250/uart.h | 30 +- src/cpu/samsung/exynos5250/wakeup.c | 6 +- src/cpu/samsung/exynos5250/wakeup.h | 13 +- src/cpu/samsung/exynos5250/watchdog.h | 57 --- src/cpu/samsung/exynos5250/wdt.c | 59 --- src/drivers/maxim/max77686/max77686.c | 22 +- src/include/gpio.h | 63 --- src/mainboard/emulation/qemu-armv7/romstage.c | 4 +- src/mainboard/google/snow/Kconfig | 1 - src/mainboard/google/snow/Makefile.inc | 2 +- src/mainboard/google/snow/chromeos.c | 2 +- src/mainboard/google/snow/devicetree.cb | 2 +- src/mainboard/google/snow/exynos5250.h | 2 +- src/mainboard/google/snow/mainboard.c | 8 +- src/mainboard/google/snow/memory.c | 5 +- src/mainboard/google/snow/romstage.c | 3 - src/mainboard/google/snow/wakeup.c | 8 +- src/mainboard/ti/beaglebone/romstage.c | 1 - 92 files changed, 2810 insertions(+), 5393 deletions(-)
diff --git a/src/arch/armv7/bootblock_simple.c b/src/arch/armv7/bootblock_simple.c index f6134f7..46e9d41 100644 --- a/src/arch/armv7/bootblock_simple.c +++ b/src/arch/armv7/bootblock_simple.c @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2010 Google Inc + * Copyright 2010 Google Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as diff --git a/src/arch/armv7/include/arch/cache.h b/src/arch/armv7/include/arch/cache.h index d5c3a5b..5166af3 100644 --- a/src/arch/armv7/include/arch/cache.h +++ b/src/arch/armv7/include/arch/cache.h @@ -32,6 +32,8 @@ #ifndef ARMV7_CACHE_H #define ARMV7_CACHE_H
+#include <stdint.h> + /* SCTLR bits */ #define SCTLR_M (1 << 0) /* MMU enable */ #define SCTLR_A (1 << 1) /* Alignment check enable */ diff --git a/src/arch/armv7/include/arch/cpu.h b/src/arch/armv7/include/arch/cpu.h index 5621aed..f8b3005 100644 --- a/src/arch/armv7/include/arch/cpu.h +++ b/src/arch/armv7/include/arch/cpu.h @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2012 Google, Inc + * Copyright 2012 Google Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/src/arch/armv7/include/arch/gpio.h b/src/arch/armv7/include/arch/gpio.h deleted file mode 100644 index b5dd9b7..0000000 --- a/src/arch/armv7/include/arch/gpio.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * Copyright (c) 2011 The Chromium OS Authors. - * Copyright (c) 2011, NVIDIA Corp. All rights reserved. - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _ASM_GENERIC_GPIO_H_ -#define _ASM_GENERIC_GPIO_H_ - -/* - * Generic GPIO API for U-Boot - * - * GPIOs are numbered from 0 to GPIO_COUNT-1 which value is defined - * by the SOC/architecture. - * - * Each GPIO can be an input or output. If an input then its value can - * be read as 0 or 1. If an output then its value can be set to 0 or 1. - * If you try to write an input then the value is undefined. If you try - * to read an output, barring something very unusual, you will get - * back the value of the output that you previously set. - * - * In some cases the operation may fail, for example if the GPIO number - * is out of range, or the GPIO is not available because its pin is - * being used by another function. In that case, functions may return - * an error value of -1. - */ - -/** - * Stop using the GPIO. This function should not alter pin configuration. - * - * @param gpio GPIO number - * @return 0 if ok, -1 on error - */ -int gpio_free(unsigned gpio); - -/** - * Make a GPIO an input. - * - * @param gpio GPIO number - * @return 0 if ok, -1 on error - */ -int gpio_direction_input(unsigned gpio); - -/** - * Make a GPIO an output, and set its value. - * - * @param gpio GPIO number - * @param value GPIO value (0 for low or 1 for high) - * @return 0 if ok, -1 on error - */ -int gpio_direction_output(unsigned gpio, int value); - -/** - * Get a GPIO's value. This will work whether the GPIO is an input - * or an output. - * - * @param gpio GPIO number - * @return 0 if low, 1 if high, -1 on error - */ -int gpio_get_value(unsigned gpio); - -/** - * Set an output GPIO's value. The GPIO must already be an output or - * this function may have no effect. - * - * @param gpio GPIO number - * @param value GPIO value (0 for low or 1 for high) - * @return 0 if ok, -1 on error - */ -int gpio_set_value(unsigned gpio, int value); - -/** - * Request ownership of a gpio. This should be called before any of the other - * functions are used on this gpio. - * - * @param gp GPIO number - * @param label User label for this GPIO - * @return 0 if ok, -1 on error - */ -int gpio_request(unsigned gpio, const char *label); - -#endif /* _ASM_GENERIC_GPIO_H_ */ diff --git a/src/arch/armv7/include/arch/io.h b/src/arch/armv7/include/arch/io.h index e62d579..b4932dc 100644 --- a/src/arch/armv7/include/arch/io.h +++ b/src/arch/armv7/include/arch/io.h @@ -2,7 +2,7 @@ * Originally imported from linux/include/asm-arm/io.h. This file has changed * substantially since then. * - * Copyright (C) 2013 Google Inc. + * Copyright 2013 Google Inc. * Copyright (C) 1996-2000 Russell King * * This program is free software; you can redistribute it and/or modify @@ -130,192 +130,4 @@ static inline void write32(uint32_t val, const void *addr) #define setbits_8(addr, set) setbits(8, addr, set) #define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
-/* - * IO port access primitives - * ------------------------- - * - * The ARM doesn't have special IO access instructions; all IO is memory - * mapped. Note that these are defined to perform little endian accesses - * only. Their primary purpose is to access PCI and ISA peripherals. - * - * Note that for a big endian machine, this implies that the following - * big endian mode connectivity is in place, as described by numerous - * ARM documents: - * - * PCI: D0-D7 D8-D15 D16-D23 D24-D31 - * ARM: D24-D31 D16-D23 D8-D15 D0-D7 - * - * The machine specific io.h include defines __io to translate an "IO" - * address to a memory address. - * - * Note that we prevent GCC re-ordering or caching values in expressions - * by introducing sequence points into the in*() definitions. - * - * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space. - */ -#ifdef __io -#define outb(v,p) writeb(v,__io(p)) -#define outw(v,p) writew(cpu_to_le16(v),__io(p)) -#define outl(v,p) writel(cpu_to_le32(v),__io(p)) - -#define inb(p) ({ unsigned int __v = readb(__io(p)); __v; }) -#define inw(p) ({ unsigned int __v = le16_to_cpu(readw(__io(p))); __v; }) -#define inl(p) ({ unsigned int __v = le32_to_cpu(readl(__io(p))); __v; }) - -#define outsb(p,d,l) writesb(__io(p),d,l) -#define outsw(p,d,l) writesw(__io(p),d,l) -#define outsl(p,d,l) writesl(__io(p),d,l) - -#define insb(p,d,l) readsb(__io(p),d,l) -#define insw(p,d,l) readsw(__io(p),d,l) -#define insl(p,d,l) readsl(__io(p),d,l) -#endif - -#define outb_p(val,port) outb((val),(port)) -#define outw_p(val,port) outw((val),(port)) -#define outl_p(val,port) outl((val),(port)) -#define inb_p(port) inb((port)) -#define inw_p(port) inw((port)) -#define inl_p(port) inl((port)) - -#define outsb_p(port,from,len) outsb(port,from,len) -#define outsw_p(port,from,len) outsw(port,from,len) -#define outsl_p(port,from,len) outsl(port,from,len) -#define insb_p(port,to,len) insb(port,to,len) -#define insw_p(port,to,len) insw(port,to,len) -#define insl_p(port,to,len) insl(port,to,len) - -/* - * ioremap and friends. - * - * ioremap takes a PCI memory address, as specified in - * linux/Documentation/IO-mapping.txt. If you want a - * physical address, use __ioremap instead. - */ -extern void * __ioremap(unsigned long offset, size_t size, unsigned long flags); -extern void __iounmap(void *addr); - -/* - * Generic ioremap support. - * - * Define: - * iomem_valid_addr(off,size) - * iomem_to_phys(off) - */ -#ifdef iomem_valid_addr -#define __arch_ioremap(off,sz,nocache) \ - ({ \ - unsigned long _off = (off), _size = (sz); \ - void *_ret = (void *)0; \ - if (iomem_valid_addr(_off, _size)) \ - _ret = __ioremap(iomem_to_phys(_off),_size,nocache); \ - _ret; \ - }) - -#define __arch_iounmap __iounmap -#endif - -/* - * String version of IO memory access ops: - */ -extern void _memcpy_fromio(void *, unsigned long, size_t); -extern void _memcpy_toio(unsigned long, const void *, size_t); -extern void _memset_io(unsigned long, int, size_t); - -extern void __readwrite_bug(const char *fn); - -/* - * If this architecture has PCI memory IO, then define the read/write - * macros. These should only be used with the cookie passed from - * ioremap. - */ -#ifdef __mem_pci - -#define readb(c) ({ unsigned int __v = readb(__mem_pci(c)); __v; }) -#define readw(c) ({ unsigned int __v = le16_to_cpu(readw(__mem_pci(c))); __v; }) -#define readl(c) ({ unsigned int __v = le32_to_cpu(readl(__mem_pci(c))); __v; }) - -#define writeb(v,c) writeb(v,__mem_pci(c)) -#define writew(v,c) writew(cpu_to_le16(v),__mem_pci(c)) -#define writel(v,c) writel(cpu_to_le32(v),__mem_pci(c)) - -#define memset_io(c,v,l) _memset_io(__mem_pci(c),(v),(l)) -#define memcpy_fromio(a,c,l) _memcpy_fromio((a),__mem_pci(c),(l)) -#define memcpy_toio(c,a,l) _memcpy_toio(__mem_pci(c),(a),(l)) - -#define eth_io_copy_and_sum(s,c,l,b) \ - eth_copy_and_sum((s),__mem_pci(c),(l),(b)) - -static inline int -check_signature(unsigned long io_addr, const unsigned char *signature, - int length) -{ - int retval = 0; - do { - if (readb(io_addr) != *signature) - goto out; - io_addr++; - signature++; - length--; - } while (length); - retval = 1; -out: - return retval; -} -#endif /* __mem_pci */ - -/* - * If this architecture has ISA IO, then define the isa_read/isa_write - * macros. - */ -#ifdef __mem_isa - -#define isa_readb(addr) readb(__mem_isa(addr)) -#define isa_readw(addr) readw(__mem_isa(addr)) -#define isa_readl(addr) readl(__mem_isa(addr)) -#define isa_writeb(val,addr) writeb(val,__mem_isa(addr)) -#define isa_writew(val,addr) writew(val,__mem_isa(addr)) -#define isa_writel(val,addr) writel(val,__mem_isa(addr)) -#define isa_memset_io(a,b,c) _memset_io(__mem_isa(a),(b),(c)) -#define isa_memcpy_fromio(a,b,c) _memcpy_fromio((a),__mem_isa(b),(c)) -#define isa_memcpy_toio(a,b,c) _memcpy_toio(__mem_isa((a)),(b),(c)) - -#define isa_eth_io_copy_and_sum(a,b,c,d) \ - eth_copy_and_sum((a),__mem_isa(b),(c),(d)) - -static inline int -isa_check_signature(unsigned long io_addr, const unsigned char *signature, - int length) -{ - int retval = 0; - do { - if (isa_readb(io_addr) != *signature) - goto out; - io_addr++; - signature++; - length--; - } while (length); - retval = 1; -out: - return retval; -} - -#else /* __mem_isa */ - -#define isa_readb(addr) (__readwrite_bug("isa_readb"),0) -#define isa_readw(addr) (__readwrite_bug("isa_readw"),0) -#define isa_readl(addr) (__readwrite_bug("isa_readl"),0) -#define isa_writeb(val,addr) __readwrite_bug("isa_writeb") -#define isa_writew(val,addr) __readwrite_bug("isa_writew") -#define isa_writel(val,addr) __readwrite_bug("isa_writel") -#define isa_memset_io(a,b,c) __readwrite_bug("isa_memset_io") -#define isa_memcpy_fromio(a,b,c) __readwrite_bug("isa_memcpy_fromio") -#define isa_memcpy_toio(a,b,c) __readwrite_bug("isa_memcpy_toio") - -#define isa_eth_io_copy_and_sum(a,b,c,d) \ - __readwrite_bug("isa_eth_io_copy_and_sum") - -#define isa_check_signature(io,sig,len) (0) - -#endif /* __mem_isa */ #endif /* __ASM_ARM_IO_H */ diff --git a/src/arch/armv7/include/arch/pci_ops.h b/src/arch/armv7/include/arch/pci_ops.h index eca9390..4bbb7d3 100644 --- a/src/arch/armv7/include/arch/pci_ops.h +++ b/src/arch/armv7/include/arch/pci_ops.h @@ -1,19 +1,28 @@ -#ifndef ARCH_I386_PCI_OPS_H -#define ARCH_I386_PCI_OPS_H +/* + * This file is part of the coreboot project. + * + * Copyright 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */
-extern const struct pci_bus_operations pci_cf8_conf1; - -#if CONFIG_MMCONF_SUPPORT -extern const struct pci_bus_operations pci_ops_mmconf; -#endif +#ifndef ARCH_ARMV7_PCI_OPS_H +#define ARCH_ARMV7_PCI_OPS_H
static inline const struct pci_bus_operations *pci_config_default(void) { - return &pci_cf8_conf1; + return NULL; }
-static inline void pci_set_method(device_t dev) -{ - dev->ops->ops_pci_bus = pci_config_default(); -} -#endif /* ARCH_I386_PCI_OPS_H */ +#endif diff --git a/src/arch/armv7/include/common.h b/src/arch/armv7/include/common.h deleted file mode 100644 index 9cb9e47..0000000 --- a/src/arch/armv7/include/common.h +++ /dev/null @@ -1,432 +0,0 @@ -/* - * (C) Copyright 2000-2009 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __COMMON_H_ -#define __COMMON_H_ 1 - -#ifndef __ASSEMBLER__ /* put C only stuff in this section */ - -#include <types.h> - -#ifdef DEBUG -#define debug(fmt,args...) printf (fmt ,##args) -#define debugX(level,fmt,args...) if (DEBUG>=level) printf(fmt,##args); -#else -#define debug(fmt,args...) -#define debugX(level,fmt,args...) -#endif /* DEBUG */ - -#ifdef DEBUG -# define _DEBUG 1 -#else -# define _DEBUG 0 -#endif - -/* - * An assertion is run-time check done in debug mode only. If DEBUG is not - * defined then it is skipped. If DEBUG is defined and the assertion fails, - * then it calls panic*( which may or may not reset/halt U-Boot (see - * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found - * before release, and after release it is hoped that they don't matter. But - * in any case these failing assertions cannot be fixed with a reset (which - * may just do the same assertion again). - */ -void __assert_fail(const char *assertion, const char *file, unsigned line, - const char *function); -#define assert(x) \ - ({ if (!(x) && _DEBUG) \ - __assert_fail(#x, __FILE__, __LINE__, __func__); }) - -#define error(fmt, args...) do { \ - printf("ERROR: " fmt "\nat %s:%d/%s()\n", \ - ##args, __FILE__, __LINE__, __func__); \ -} while (0) - -#ifndef BUG -#define BUG() do { \ - printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \ - panic("BUG!"); \ -} while (0) -#define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0) -#endif /* BUG */ - -/* Force a compilation error if condition is true */ -#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) - -typedef void (interrupt_handler_t)(void *); - -/* - * Return the time since boot in microseconds, This is needed for bootstage - * and should be defined in CPU- or board-specific code. If undefined then - * millisecond resolution will be used (the standard get_timer()). - */ -unsigned long timer_get_boot_us(void); - -/* - * Return the current value of a monotonically increasing microsecond timer. - * Granularity may be larger than 1us if hardware does not support this. - */ -unsigned long timer_get_us(void); - -/* - * General Purpose Utilities - */ -#if 0 -#define min(X, Y) \ - ({ typeof (X) __x = (X); \ - typeof (Y) __y = (Y); \ - (__x < __y) ? __x : __y; }) - -#define max(X, Y) \ - ({ typeof (X) __x = (X); \ - typeof (Y) __y = (Y); \ - (__x > __y) ? __x : __y; }) -#define MIN(x, y) min(x, y) -#define MAX(x, y) max(x, y) -#endif - -/** - * container_of - cast a member of a structure out to the containing structure - * @ptr: the pointer to the member. - * @type: the type of the container struct this is embedded in. - * @member: the name of the member within the struct. - * - */ -#define container_of(ptr, type, member) ({ \ - const typeof( ((type *)0)->member ) *__mptr = (ptr); \ - (type *)( (char *)__mptr - offsetof(type,member) );}) - -/* - * Function Prototypes - */ - -int init_timer(void); /* FIXME(dhendrix): used to be timer_init() */ -int cpu_init(void); - -/* */ -unsigned long long initdram (int); -int display_options (void); -void print_size(unsigned long long, const char *); -int print_buffer (unsigned long addr, void* data, unsigned int width, unsigned int count, unsigned int linelen); - -/* common/main.c */ -void main_loop (void); -int run_command (const char *cmd, int flag); -int readline (const char *const prompt); -int readline_into_buffer (const char *const prompt, char * buffer); -int parse_line (char *, char *[]); -void init_cmd_timeout(void); -void reset_cmd_timeout(void); - -/* arch/$(ARCH)/lib/board.c */ -void board_init_f (void); -int checkboard (void); -int checkflash (void); -int checkdram (void); -int last_stage_init(void); -extern unsigned long monitor_flash_len; -int mac_read_from_eeprom(void); - -#ifdef CONFIG_ARM -# include <asm/mach-types.h> -# include <asm/setup.h> -# include <asm/u-boot-arm.h> /* ARM version to be fixed! */ -#endif /* CONFIG_ARM */ - -int misc_init_f (void); -int misc_init_r (void); - -/* common/exports.c */ -void jumptable_init(void); - -/* common/kallsysm.c */ -const char *symbol_lookup(unsigned long addr, unsigned long *caddr); - -/* api/api.c */ -void api_init (void); - -/* common/memsize.c */ -long get_ram_size (long *, long); - -/* $(BOARD)/$(BOARD).c */ -void reset_phy (void); -void fdc_hw_init (void); - -/* $(BOARD)/eeprom.c */ -void eeprom_init (void); -#ifndef CONFIG_SPI -int eeprom_probe (unsigned dev_addr, unsigned offset); -#endif -int eeprom_read (unsigned dev_addr, unsigned offset, unsigned char *buffer, unsigned cnt); -int eeprom_write (unsigned dev_addr, unsigned offset, unsigned char *buffer, unsigned cnt); - -/* - * Set this up regardless of board - * type, to prevent errors. - */ -#if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) -# define CONFIG_SYS_DEF_EEPROM_ADDR 0 -#else -#if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) -# define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR -#endif -#endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */ - -#if defined(CONFIG_SPI) -extern void spi_init_f (void); -extern void spi_init_r (void); -extern ssize_t spi_read (unsigned char *, int, unsigned char *, int); -extern ssize_t spi_write (unsigned char *, int, unsigned char *, int); -#endif - -/* $(BOARD)/$(BOARD).c */ -int board_early_init_f (void); -int board_late_init (void); -int board_postclk_init (void); /* after clocks/timebase, before env/serial */ -int board_early_init_r (void); -void board_poweroff (void); - -#if defined(CONFIG_SYS_DRAM_TEST) -int testdram(void); -#endif /* CONFIG_SYS_DRAM_TEST */ - -/* $(CPU)/start.S */ -#if defined(CONFIG_5xx) || \ - defined(CONFIG_8xx) -unsigned int get_immr (unsigned int); -#endif -unsigned int get_pir (void); -#if defined(CONFIG_MPC5xxx) -unsigned int get_svr (void); -#endif -unsigned int get_pvr (void); -unsigned int get_svr (void); -unsigned int rd_ic_cst (void); -void wr_ic_cst (unsigned int); -void wr_ic_adr (unsigned int); -unsigned int rd_dc_cst (void); -void wr_dc_cst (unsigned int); -void wr_dc_adr (unsigned int); -int icache_status (void); -void icache_enable (unsigned long start, unsigned long size); -void icache_disable(void); -int dcache_status (void); -void dcache_enable (unsigned long start, unsigned long size); -void dcache_disable(void); -void mmu_disable(void); -unsigned long get_endaddr (void); -void trap_init (unsigned long); -#if defined (CONFIG_4xx) || \ - defined (CONFIG_MPC5xxx) || \ - defined (CONFIG_74xx_7xx) || \ - defined (CONFIG_74x) || \ - defined (CONFIG_75x) || \ - defined (CONFIG_74xx) || \ - defined (CONFIG_MPC8220) || \ - defined (CONFIG_MPC85xx) || \ - defined (CONFIG_MPC86xx) || \ - defined (CONFIG_MPC83xx) -unsigned char in8(unsigned int); -void out8(unsigned int, unsigned char); -unsigned short in16(unsigned int); -unsigned short in16r(unsigned int); -void out16(unsigned int, unsigned short value); -void out16r(unsigned int, unsigned short value); -unsigned long in32(unsigned int); -unsigned long in32r(unsigned int); -void out32(unsigned int, unsigned long value); -void out32r(unsigned int, unsigned long value); -void ppcDcbf(unsigned long value); -void ppcDcbi(unsigned long value); -void ppcSync(void); -void ppcDcbz(unsigned long value); -#endif - -/* $(CPU)/cpu.c */ -static inline int cpumask_next(int cpu, unsigned int mask) -{ - for (cpu++; !((1 << cpu) & mask); cpu++) - ; - - return cpu; -} - -#define for_each_cpu(iter, cpu, num_cpus, mask) \ - for (iter = 0, cpu = cpumask_next(-1, mask); \ - iter < num_cpus; \ - iter++, cpu = cpumask_next(cpu, mask)) \ - -int cpu_numcores (void); -u32 cpu_mask (void); -int is_core_valid (unsigned int); -int probecpu (void); -int checkcpu (void); -int checkicache (void); -int checkdcache (void); -void upmconfig (unsigned int, unsigned int *, unsigned int); -unsigned long get_tbclk (void); - - -/* $(CPU)/serial.c */ -int serial_init (void); -void serial_setbrg (void); -void serial_putc (const char); -void serial_putc_raw(const char); -void serial_puts (const char *); -int serial_getc (void); -int serial_tstc (void); - -void _serial_setbrg (const int); -void _serial_putc (const char, const int); -void _serial_putc_raw(const char, const int); -void _serial_puts (const char *, const int); -int _serial_getc (const int); -int _serial_tstc (const int); - -/* $(CPU)/speed.c */ -int get_clocks (void); -int get_clocks_866 (void); -int sdram_adjust_866 (void); -int adjust_sdram_tbs_8xx (void); -#if defined(CONFIG_8260) -int prt_8260_clks (void); -#elif defined(CONFIG_MPC5xxx) -int prt_mpc5xxx_clks (void); -#endif -#if defined(CONFIG_MPC512X) -int prt_mpc512xxx_clks (void); -#endif -#if defined(CONFIG_MPC8220) -int prt_mpc8220_clks (void); -#endif -#ifdef CONFIG_4xx -unsigned long get_OPB_freq (void); -unsigned long get_PCI_freq (void); -#endif -#if defined(CONFIG_S3C24X0) || \ - defined(CONFIG_LH7A40X) || \ - defined(CONFIG_S3C6400) || \ - defined(CONFIG_EP93XX) -unsigned long get_FCLK (void); -unsigned long get_HCLK (void); -unsigned long get_PCLK (void); -unsigned long get_UCLK (void); -#endif -#if defined(CONFIG_LH7A40X) -unsigned long get_PLLCLK (void); -#endif -#if defined CONFIG_INCA_IP -unsigned int incaip_get_cpuclk (void); -#endif -#if defined(CONFIG_IMX) -unsigned long get_systemPLLCLK(void); -unsigned long get_FCLK(void); -unsigned long get_HCLK(void); -unsigned long get_BCLK(void); -unsigned long get_PERCLK1(void); -unsigned long get_PERCLK2(void); -unsigned long get_PERCLK3(void); -#endif -unsigned long get_bus_freq (unsigned long); -int get_serial_clock(void); - -struct pt_regs; -/* $(CPU)/interrupts.c */ -int interrupt_init (void); -void timer_interrupt (struct pt_regs *); -void external_interrupt (struct pt_regs *); -void irq_install_handler(int, interrupt_handler_t *, void *); -void irq_free_handler (int); -void reset_timer (void); -unsigned long get_timer (unsigned long base); -void enable_interrupts (void); -int disable_interrupts (void); - -/* $(CPU)/.../commproc.c */ -int dpram_init (void); -unsigned int dpram_base(void); -unsigned int dpram_base_align(unsigned int align); -unsigned int dpram_alloc(unsigned int size); -unsigned int dpram_alloc_align(unsigned int size,unsigned int align); -void bootcount_store (unsigned long); -unsigned long bootcount_load (void); -#define BOOTCOUNT_MAGIC 0xB001C041 - -/* $(CPU)/.../<eth> */ -void mii_init (void); - -/* $(CPU)/.../lcd.c */ -unsigned long lcd_setmem (unsigned long); - -/* $(CPU)/.../video.c */ -unsigned long video_setmem (unsigned long); - -/* arch/$(ARCH)/lib/cache.c */ -unsigned long dcache_get_line_size(void); -void enable_caches(void); -void flush_cache (unsigned long, unsigned long); -void flush_dcache_all(void); -void flush_dcache_range(unsigned long start, unsigned long stop); -void invalidate_dcache_range(unsigned long start, unsigned long stop); -void invalidate_dcache_all(void); -void invalidate_icache_all(void); - -/* arch/$(ARCH)/lib/ticks.S */ -unsigned long long get_ticks(void); -void wait_ticks (unsigned long); - -/* arch/$(ARCH)/lib/time.c */ -void __udelay (unsigned long); -unsigned long usec2ticks (unsigned long usec); -unsigned long ticks2usec (unsigned long ticks); -int init_timebase (void); - -/* lib/qsort.c */ -void qsort(void *base, size_t nmemb, size_t size, - int(*compar)(const void *, const void *)); -int strcmp_compar(const void *, const void *); - -/* lib/time.c */ -void udelay (unsigned long); - -/* Multicore arch functions */ -#ifdef CONFIG_MP -int cpu_status(int nr); -int cpu_reset(int nr); -int cpu_disable(int nr); -int cpu_release(int nr, int argc, char * const argv[]); -#endif - -#endif /* __ASSEMBLER__ */ - -/* Put only stuff here that the assembler can digest */ - -#define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1)) -#define DIV_ROUND(n,d) (((n) + ((d)/2)) / (d)) -#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) -#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) - -//#define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1) -#define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask)) - -#endif /* __COMMON_H_ */ diff --git a/src/arch/armv7/lib/eabi_compat.c b/src/arch/armv7/lib/eabi_compat.c index 2772de6..c063c85 100644 --- a/src/arch/armv7/lib/eabi_compat.c +++ b/src/arch/armv7/lib/eabi_compat.c @@ -9,7 +9,6 @@ * License, or (at your option) any later version. */
-#include <common.h> #include <console/console.h>
/* FIXME(dhendrix): prototypes added for assembler */ diff --git a/src/arch/armv7/lib/interrupts.c b/src/arch/armv7/lib/interrupts.c index 4ac599d..7508c69 100644 --- a/src/arch/armv7/lib/interrupts.c +++ b/src/arch/armv7/lib/interrupts.c @@ -35,7 +35,6 @@ * MA 02111-1307 USA */
-#include <common.h> #include <reset.h>
DECLARE_GLOBAL_DATA_PTR; diff --git a/src/arch/armv7/stages.c b/src/arch/armv7/stages.c index 038ed7c..e26dbe5 100644 --- a/src/arch/armv7/stages.c +++ b/src/arch/armv7/stages.c @@ -32,7 +32,6 @@ */
#include <arch/stages.h> -#include <arch/armv7/include/common.h> #include <arch/cache.h>
void stage_entry(void) diff --git a/src/cpu/armltd/cortex-a9/cache.c b/src/cpu/armltd/cortex-a9/cache.c index 4f440ec..7c91d69 100644 --- a/src/cpu/armltd/cortex-a9/cache.c +++ b/src/cpu/armltd/cortex-a9/cache.c @@ -11,7 +11,6 @@ * GNU General Public License for more details. */
-#include <common.h> #include <armv7.h>
/* diff --git a/src/cpu/samsung/exynos5250/Kconfig b/src/cpu/samsung/exynos5250/Kconfig index eaf6668..5f5add4 100644 --- a/src/cpu/samsung/exynos5250/Kconfig +++ b/src/cpu/samsung/exynos5250/Kconfig @@ -10,10 +10,6 @@ config EXYNOS_ACE_SHA bool default n
-config SATA_AHCI - bool - default n - config BL1_SIZE_KB int default 8 diff --git a/src/cpu/samsung/exynos5250/Makefile.inc b/src/cpu/samsung/exynos5250/Makefile.inc index 6227b2a..dcc783d 100644 --- a/src/cpu/samsung/exynos5250/Makefile.inc +++ b/src/cpu/samsung/exynos5250/Makefile.inc @@ -9,7 +9,6 @@ bootblock-y += pinmux.c mct.c power.c bootblock-$(CONFIG_EARLY_CONSOLE) += clock_init.c bootblock-$(CONFIG_EARLY_CONSOLE) += clock.c bootblock-$(CONFIG_EARLY_CONSOLE) += monotonic_timer.c -bootblock-$(CONFIG_EARLY_CONSOLE) += soc.c bootblock-$(CONFIG_EARLY_CONSOLE) += uart.c bootblock-y += wakeup.c bootblock-y += gpio.c @@ -19,13 +18,12 @@ bootblock-$(CONFIG_EARLY_CONSOLE) += timer.c romstage-y += spi.c romstage-y += clock.c romstage-y += clock_init.c -romstage-y += pinmux.c # required by s3c24x0_i2c (exynos5-common) and uart. +romstage-y += pinmux.c # required by s3c24x0_i2c and uart. romstage-y += dmc_common.c romstage-y += dmc_init_ddr3.c romstage-y += power.c romstage-y += mct.c romstage-y += monotonic_timer.c -romstage-$(CONFIG_EARLY_CONSOLE) += soc.c romstage-$(CONFIG_EARLY_CONSOLE) += uart.c romstage-y += wakeup.c romstage-y += pwm.c # needed by timer.c @@ -33,29 +31,23 @@ romstage-y += gpio.c romstage-y += timer.c romstage-y += i2c.c #romstage-y += wdt.c -#romstage-y += sromc.c
ramstage-y += spi.c -#ramstage-y += tzpc_init.c ramstage-y += clock.c ramstage-y += clock_init.c ramstage-y += pinmux.c ramstage-y += power.c -ramstage-y += soc.c ramstage-$(CONFIG_CONSOLE_SERIAL_UART) += uart.c ramstage-y += cpu.c -ramstage-y += exynos5250-tmu.c +ramstage-y += tmu.c ramstage-y += mct.c ramstage-y += monotonic_timer.c -#ramstage-$(CONFIG_SATA_AHCI) += sata.c -ramstage-y += cpu_info.c ramstage-y += pwm.c # needed by timer.c ramstage-y += timer.c ramstage-y += gpio.c ramstage-y += i2c.c -ramstage-y += s5p-dp-reg.c -ramstage-y += exynos-fb.c -ramstage-y += exynos-tmu.c +ramstage-y += dp-reg.c +ramstage-y += fb.c
exynos5250_add_bl1: $(obj)/coreboot.pre printf " DD Adding Samsung Exynos5250 BL1\n" diff --git a/src/cpu/samsung/exynos5250/adc.h b/src/cpu/samsung/exynos5250/adc.h deleted file mode 100644 index 64f4813..0000000 --- a/src/cpu/samsung/exynos5250/adc.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics - * Minkyu Kang mk7.kang@samsung.com - * MyungJoo Ham myungjoo.ham@samsung.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __ASM_ARM_ARCH_COMMON_ADC_H_ -#define __ASM_ARM_ARCH_COMMON_ADC_H_ - -#ifndef __ASSEMBLER__ -struct s5p_adc { - unsigned int adccon; - unsigned int adctsc; - unsigned int adcdly; - unsigned int adcdat0; - unsigned int adcdat1; - unsigned int adcupdn; - unsigned int adcclrint; - unsigned int adcmux; - unsigned int adcclrintpndnup; -}; -#endif - -#endif /* __ASM_ARM_ARCH_COMMON_ADC_H_ */ diff --git a/src/cpu/samsung/exynos5250/bootblock.c b/src/cpu/samsung/exynos5250/bootblock.c index e4d0f6c..f523428 100644 --- a/src/cpu/samsung/exynos5250/bootblock.c +++ b/src/cpu/samsung/exynos5250/bootblock.c @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2013 The Chromium OS Authors + * Copyright 2013 Google Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/src/cpu/samsung/exynos5250/clk.h b/src/cpu/samsung/exynos5250/clk.h index 24e8e70..ba8d960 100644 --- a/src/cpu/samsung/exynos5250/clk.h +++ b/src/cpu/samsung/exynos5250/clk.h @@ -1,11 +1,12 @@ /* - * (C) Copyright 2012 Samsung Electronics - * Minkyu Kang mk7.kang@samsung.com + * This file is part of the coreboot project. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * Copyright 2013 Google Inc. + * Copyright (C) 2012 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -14,15 +15,12 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#ifndef __EXYNOS5_CLK_H__ -#define __EXYNOS5_CLK_H__ +#ifndef CPU_SAMSUNG_EXYNOS5250_CLK_H +#define CPU_SAMSUNG_EXYNOS5250_CLK_H
-#include <types.h> #include <stdint.h>
enum periph_id; @@ -66,7 +64,7 @@ void set_mmc_clk(int dev_index, unsigned int div); */ unsigned long clock_get_periph_rate(enum periph_id peripheral);
-#include <cpu/samsung/exynos5250/pinmux.h> +#include "pinmux.h"
#define MCT_ADDRESS 0x101c0000 @@ -107,8 +105,6 @@ void clock_select_i2s_clk_source(void); */ int clock_set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq);
-/* FIXME(dhendrix): below is stuff from arch/arm/include/asm/arch-exynos5/clock.h - (as opposed to the two clk.h files as they were named in u-boot... */ struct exynos5_clock { unsigned int apll_lock; /* base + 0 */ unsigned char res1[0xfc]; @@ -585,50 +581,44 @@ void clock_ll_set_ratio(enum periph_id periph_id, unsigned divisor); */ int clock_set_rate(enum periph_id periph_id, unsigned int rate);
-/** - * Decode a peripheral ID from a device node. - * - * Drivers should always use this function since the actual means of - * encoding this information may change in the future as fdt support for - * exynos evolves. - * - * @param blob FDT blob to read from - * @param node Node containing the information - */ -int clock_decode_periph_id(const void *blob, int node); - /* Clock gate unused IP */ void clock_gate(void);
-enum ddr_mode; -enum mem_manuf; +void mct_start(void); +uint64_t mct_raw_value(void);
-const char *clock_get_mem_type_name(enum ddr_mode mem_type); +#include "dmc.h"
-const char *clock_get_mem_manuf_name(enum mem_manuf mem_manuf); +/* These are the ratio's for configuring ARM clock */ +struct arm_clk_ratios { + unsigned int arm_freq_mhz; /* Frequency of ARM core in MHz */ + + unsigned int apll_mdiv; + unsigned int apll_pdiv; + unsigned int apll_sdiv; + + unsigned int arm2_ratio; + unsigned int apll_ratio; + unsigned int pclk_dbg_ratio; + unsigned int atb_ratio; + unsigned int periph_ratio; + unsigned int acp_ratio; + unsigned int cpud_ratio; + unsigned int arm_ratio; +};
-/* - * TODO(sjg@chromium.org): Remove this when we have more SPL space. - * At present we are using 14148 of 14336 bytes. If we change this function - * to be exported in SPL, we go over the edge. - */ /** - * Get the required memory type and speed (Main U-Boot version). - * - * This should use the device tree. For now we cannot since this function is - * called before the FDT is available. + * Get the clock ratios for CPU configuration * - * @param mem_type Returns memory type - * @param frequency_mhz Returns memory speed in MHz - * @param arm_freq Returns ARM clock speed in MHz - * @param mem_manuf Return Memory Manufacturer name - * @return 0 if all ok (if not, this function currently does not return) + * @return pointer to the clock ratios that we should use */ -int clock_get_mem_selection(enum ddr_mode *mem_type, - unsigned *frequency_mhz, unsigned *arm_freq, - enum mem_manuf *mem_manuf); +struct arm_clk_ratios *get_arm_clk_ratios(void);
-void mct_start(void); -uint64_t mct_raw_value(void); +/* + * Initialize clock for the device + */ +struct mem_timings; +void system_clock_init(struct mem_timings *mem, + struct arm_clk_ratios *arm_clk_ratio);
#endif diff --git a/src/cpu/samsung/exynos5250/clock.c b/src/cpu/samsung/exynos5250/clock.c index de41346..64302f0 100644 --- a/src/cpu/samsung/exynos5250/clock.c +++ b/src/cpu/samsung/exynos5250/clock.c @@ -1,14 +1,11 @@ /* - * Copyright (C) 2010 Samsung Electronics - * Minkyu Kang mk7.kang@samsung.com + * This file is part of the coreboot project. * - * See file CREDITS for list of people who contributed to this - * project. + * Copyright (C) 2010 Samsung Electronics * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -17,23 +14,21 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#include <common.h> #include <console/console.h> #include <stdlib.h> -//#include <fdtdec.h> +#include <assert.h> #include <arch/io.h> -#include <cpu/samsung/exynos5250/clk.h> -#include <cpu/samsung/exynos5250/clock_init.h> -#include <cpu/samsung/exynos5250/cpu.h> +#include "timer.h" +#include "clk.h" +#include "cpu.h"
/* input clock of PLL: SMDK5250 has 24MHz input clock */ #define CONFIG_SYS_CLK_FREQ 24000000
-struct arm_clk_ratios arm_clk_ratios[] = { +static struct arm_clk_ratios arm_clk_ratios[] = { { .arm_freq_mhz = 600,
@@ -438,7 +433,7 @@ void clock_ll_set_pre_ratio(enum periph_id periph_id, unsigned divisor) shift = 16; break; default: - debug("%s: Unsupported peripheral ID %d\n", __func__, + printk(BIOS_DEBUG, "%s: Unsupported peripheral ID %d\n", __func__, periph_id); return; } @@ -475,7 +470,7 @@ void clock_ll_set_ratio(enum periph_id periph_id, unsigned divisor) shift = 12; break; default: - debug("%s: Unsupported peripheral ID %d\n", __func__, + printk(BIOS_DEBUG, "%s: Unsupported peripheral ID %d\n", __func__, periph_id); return; } @@ -507,11 +502,11 @@ static int clock_calc_best_scalar(unsigned int main_scaler_bits, const unsigned int cap = (1 << fine_scalar_bits) - 1; const unsigned int loops = 1 << main_scaler_bits;
- debug("Input Rate is %u, Target is %u, Cap is %u\n", input_rate, + printk(BIOS_DEBUG, "Input Rate is %u, Target is %u, Cap is %u\n", input_rate, target_rate, cap);
- assert(best_fine_scalar != NULL); - assert(main_scaler_bits <= fine_scalar_bits); + ASSERT(best_fine_scalar != NULL); + ASSERT(main_scaler_bits <= fine_scalar_bits);
*best_fine_scalar = 1;
@@ -528,7 +523,7 @@ static int clock_calc_best_scalar(unsigned int main_scaler_bits, effective_div; const int error = target_rate - effective_rate;
- debug("%d|effdiv:%u, effrate:%u, error:%d\n", i, effective_div, + printk(BIOS_DEBUG, "%d|effdiv:%u, effrate:%u, error:%d\n", i, effective_div, effective_rate, error);
if (error >= 0 && error <= best_error) { @@ -554,7 +549,7 @@ int clock_set_rate(enum periph_id periph_id, unsigned int rate) case PERIPH_ID_SPI4: main = clock_calc_best_scalar(4, 8, 400000000, rate, &fine); if (main < 0) { - debug("%s: Cannot set clock rate for periph %d", + printk(BIOS_DEBUG, "%s: Cannot set clock rate for periph %d", __func__, periph_id); return -1; } @@ -562,7 +557,7 @@ int clock_set_rate(enum periph_id periph_id, unsigned int rate) clock_ll_set_pre_ratio(periph_id, fine - 1); break; default: - debug("%s: Unsupported peripheral ID %d\n", __func__, + printk(BIOS_DEBUG, "%s: Unsupported peripheral ID %d\n", __func__, periph_id); return -1; } @@ -596,7 +591,7 @@ int clock_set_mshci(enum periph_id peripheral) addr = &clk->div_fsys2; break; default: - debug("invalid peripheral\n"); + printk(BIOS_DEBUG, "invalid peripheral\n"); return -1; } tmp = readl(addr) & ~0xff0f; @@ -609,24 +604,6 @@ int clock_set_mshci(enum periph_id peripheral) return 0; }
-#ifdef CONFIG_OF_CONTROL -int clock_decode_periph_id(const void *blob, int node) -{ - enum periph_id id; - - /* - * For now the peripheral ID is directly encoded. Once we have clock - * support in the fdt and properly in exynos U-Boot we may have - * another way of changing the clock. - */ - id = fdtdec_get_int(blob, node, "samsung,periph-id", -1); - assert(id != PERIPH_ID_NONE); - assert(id >= 0 && id < PERIPH_ID_COUNT); - - return id; -} -#endif - int clock_epll_set_rate(unsigned long rate) { unsigned int epll_con, epll_con_k; @@ -697,15 +674,15 @@ int clock_set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq) unsigned int div ;
if ((dst_frq == 0) || (src_frq == 0)) { - debug("%s: Invalid requency input for prescaler\n", __func__); - debug("src frq = %d des frq = %d ", src_frq, dst_frq); + printk(BIOS_DEBUG, "%s: Invalid requency input for prescaler\n", __func__); + printk(BIOS_DEBUG, "src frq = %d des frq = %d ", src_frq, dst_frq); return -1; }
div = (src_frq / dst_frq); if (div > AUDIO_1_RATIO_MASK) { - debug("%s: Frequency ratio is out of range\n", __func__); - debug("src frq = %d des frq = %d ", src_frq, dst_frq); + printk(BIOS_DEBUG, "%s: Frequency ratio is out of range\n", __func__); + printk(BIOS_DEBUG, "src frq = %d des frq = %d ", src_frq, dst_frq); return -1; } clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK, diff --git a/src/cpu/samsung/exynos5250/clock.h b/src/cpu/samsung/exynos5250/clock.h deleted file mode 100644 index c0cd896..0000000 --- a/src/cpu/samsung/exynos5250/clock.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * (C) Copyright 2009 Samsung Electronics - * Minkyu Kang mk7.kang@samsung.com - * Heungjun Kim riverful.kim@samsung.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARM_ARCH_CLOCK_H_ -#define __ASM_ARM_ARCH_CLOCK_H_ - -#ifndef __ASSEMBLER__ -struct s5pc100_clock { - unsigned int apll_lock; - unsigned int mpll_lock; - unsigned int epll_lock; - unsigned int hpll_lock; - unsigned char res1[0xf0]; - unsigned int apll_con; - unsigned int mpll_con; - unsigned int epll_con; - unsigned int hpll_con; - unsigned char res2[0xf0]; - unsigned int src0; - unsigned int src1; - unsigned int src2; - unsigned int src3; - unsigned char res3[0xf0]; - unsigned int div0; - unsigned int div1; - unsigned int div2; - unsigned int div3; - unsigned int div4; - unsigned char res4[0x1ec]; - unsigned int gate_d00; - unsigned int gate_d01; - unsigned int gate_d02; - unsigned char res5[0x54]; - unsigned int gate_sclk0; - unsigned int gate_sclk1; -}; - -struct s5pc110_clock { - unsigned int apll_lock; - unsigned char res1[0x4]; - unsigned int mpll_lock; - unsigned char res2[0x4]; - unsigned int epll_lock; - unsigned char res3[0xc]; - unsigned int vpll_lock; - unsigned char res4[0xdc]; - unsigned int apll_con; - unsigned char res5[0x4]; - unsigned int mpll_con; - unsigned char res6[0x4]; - unsigned int epll_con; - unsigned char res7[0xc]; - unsigned int vpll_con; - unsigned char res8[0xdc]; - unsigned int src0; - unsigned int src1; - unsigned int src2; - unsigned int src3; - unsigned char res9[0xf0]; - unsigned int div0; - unsigned int div1; - unsigned int div2; - unsigned int div3; - unsigned int div4; - unsigned char res10[0x1ec]; - unsigned int gate_d00; - unsigned int gate_d01; - unsigned int gate_d02; - unsigned char res11[0x54]; - unsigned int gate_sclk0; - unsigned int gate_sclk1; -}; -#endif - -#endif diff --git a/src/cpu/samsung/exynos5250/clock_init.c b/src/cpu/samsung/exynos5250/clock_init.c index 42ff9ad..2cfdaf4 100644 --- a/src/cpu/samsung/exynos5250/clock_init.c +++ b/src/cpu/samsung/exynos5250/clock_init.c @@ -1,15 +1,11 @@ /* - * Clock setup for SMDK5250 board based on EXYNOS5 + * This file is part of the coreboot project. * * Copyright (C) 2012 Samsung Electronics * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -18,23 +14,16 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#include <delay.h> -#include <stdlib.h> -#include <types.h> +/* Clock setup for SMDK5250 board based on EXYNOS5 */
#include <console/console.h> - -/* FIXME: remove unneeded #includes */ -#include <cpu/samsung/exynos5250/clk.h> -#include <cpu/samsung/exynos5250/clock_init.h> -#include <cpu/samsung/exynos5250/cpu.h> -#include <cpu/samsung/exynos5250/dmc.h> -#include <cpu/samsung/exynos5250/s5p-dp.h> - +#include <delay.h> +#include "clk.h" +#include "cpu.h" +#include "dp.h" #include "setup.h"
void system_clock_init(struct mem_timings *mem, diff --git a/src/cpu/samsung/exynos5250/clock_init.h b/src/cpu/samsung/exynos5250/clock_init.h deleted file mode 100644 index bb7f7e9..0000000 --- a/src/cpu/samsung/exynos5250/clock_init.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Clock initialization routines - * - * Copyright (c) 2011 The Chromium OS Authors. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __EXYNOS_CLOCK_INIT_H -#define __EXYNOS_CLOCK_INIT_H -#include "dmc.h" - -/* These are the ratio's for configuring ARM clock */ -struct arm_clk_ratios { - unsigned int arm_freq_mhz; /* Frequency of ARM core in MHz */ - - unsigned int apll_mdiv; - unsigned int apll_pdiv; - unsigned int apll_sdiv; - - unsigned int arm2_ratio; - unsigned int apll_ratio; - unsigned int pclk_dbg_ratio; - unsigned int atb_ratio; - unsigned int periph_ratio; - unsigned int acp_ratio; - unsigned int cpud_ratio; - unsigned int arm_ratio; -}; - -/** - * Get the clock ratios for CPU configuration - * - * @return pointer to the clock ratios that we should use - */ -struct arm_clk_ratios *get_arm_clk_ratios(void); - -/* - * Initialize clock for the device - */ -struct mem_timings; -void system_clock_init(struct mem_timings *mem, - struct arm_clk_ratios *arm_clk_ratio); -#endif diff --git a/src/cpu/samsung/exynos5250/cpu.c b/src/cpu/samsung/exynos5250/cpu.c index 2acebbb..b51a591 100644 --- a/src/cpu/samsung/exynos5250/cpu.c +++ b/src/cpu/samsung/exynos5250/cpu.c @@ -1,3 +1,22 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + #include <stdlib.h> #include <string.h> #include <stddef.h> @@ -6,15 +25,35 @@ #include <device/device.h> #include <cbmem.h> #include <arch/cache.h> -#include <cpu/samsung/exynos5250/fimd.h> -#include <cpu/samsung/exynos5250/s5p-dp-core.h> -#include <cpu/samsung/exynos5250/cpu.h> -#include "chip.h" +#include "fimd.h" +#include "dp-core.h" #include "cpu.h" +#include "clk.h" +#include "chip.h"
#define RAM_BASE_KB (CONFIG_SYS_SDRAM_BASE >> 10) #define RAM_SIZE_KB (CONFIG_DRAM_SIZE_MB << 10UL)
+static unsigned int cpu_id; +static unsigned int cpu_rev; + +static void set_cpu_id(void) +{ + cpu_id = readl((void *)EXYNOS_PRO_ID); + cpu_id = (0xC000 | ((cpu_id & 0x00FFF000) >> 12)); + + /* + * 0xC200: EXYNOS4210 EVT0 + * 0xC210: EXYNOS4210 EVT1 + */ + if (cpu_id == 0xC200) { + cpu_id |= 0x10; + cpu_rev = 0; + } else if (cpu_id == 0xC210) { + cpu_rev = 1; + } +} + /* we distinguish a display port device from a raw graphics device * because there are dramatic differences in startup depending on * graphics usage. To make startup fast and easier to understand and @@ -64,7 +103,7 @@ static void exynos_displayport_init(device_t dev) */ fb_size = conf->xres * conf->yres * (conf->bpp / 8); lcdbase = (uintptr_t)cbmem_add(CBMEM_ID_CONSOLE, fb_size + 64*KiB); - printk(BIOS_SPEW, "lcd colormap base is %p\n", (void *)(lcdbase)); + printk(BIOS_SPEW, "LCD colormap base is %p\n", (void *)(lcdbase)); mmio_resource(dev, 0, lcdbase/KiB, 64); vi.cmap = (void *)lcdbase;
@@ -89,7 +128,7 @@ static void exynos_displayport_init(device_t dev) lcdbase += 64*KiB; mmio_resource(dev, 1, lcdbase/KiB, (fb_size + KiB - 1)/KiB); printk(BIOS_DEBUG, - "Initializing exynos VGA, base %p\n", (void *)lcdbase); + "Initializing Exynos VGA, base %p\n", (void *)lcdbase); memset((void *)lcdbase, 0, fb_size); /* clear the framebuffer */ ret = lcd_ctrl_init(&vi, &panel, (void *)lcdbase); } @@ -99,7 +138,10 @@ static void cpu_init(device_t dev) exynos_displayport_init(dev); ram_resource(dev, 0, RAM_BASE_KB, RAM_SIZE_KB);
- arch_cpu_init(); + set_cpu_id(); + + printk(BIOS_INFO, "CPU: S5P%X @ %ldMHz\n", + cpu_id, get_arm_clk() / (1024*1024)); }
static void cpu_noop(device_t dev) diff --git a/src/cpu/samsung/exynos5250/cpu.h b/src/cpu/samsung/exynos5250/cpu.h index 1f94d8f..46c46bd 100644 --- a/src/cpu/samsung/exynos5250/cpu.h +++ b/src/cpu/samsung/exynos5250/cpu.h @@ -1,11 +1,11 @@ /* - * (C) Copyright 2010 Samsung Electronics - * Minkyu Kang mk7.kang@samsung.com + * This file is part of the coreboot project. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * Copyright (C) 2010 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -14,49 +14,11 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#ifndef _EXYNOS5250_CPU_H -#define _EXYNOS5250_CPU_H - -#define S5PC1XX_ADDR_BASE 0xE0000000 - -/* S5PC100 */ -#define S5PC100_PRO_ID 0xE0000000 -#define S5PC100_CLOCK_BASE 0xE0100000 -#define S5PC100_GPIO_BASE 0xE0300000 -#define S5PC100_VIC0_BASE 0xE4000000 -#define S5PC100_VIC1_BASE 0xE4100000 -#define S5PC100_VIC2_BASE 0xE4200000 -#define S5PC100_DMC_BASE 0xE6000000 -#define S5PC100_SROMC_BASE 0xE7000000 -#define S5PC100_ONENAND_BASE 0xE7100000 -#define S5PC100_PWMTIMER_BASE 0xEA000000 -#define S5PC100_WATCHDOG_BASE 0xEA200000 -#define S5PC100_UART_BASE 0xEC000000 -#define S5PC100_MMC_BASE 0xED800000 - -/* S5PC110 */ -#define S5PC110_PRO_ID 0xE0000000 -#define S5PC110_CLOCK_BASE 0xE0100000 -#define S5PC110_GPIO_BASE 0xE0200000 -#define S5PC110_PWMTIMER_BASE 0xE2500000 -#define S5PC110_WATCHDOG_BASE 0xE2700000 -#define S5PC110_UART_BASE 0xE2900000 -#define S5PC110_SROMC_BASE 0xE8000000 -#define S5PC110_MMC_BASE 0xEB000000 -#define S5PC110_DMC0_BASE 0xF0000000 -#define S5PC110_DMC1_BASE 0xF1400000 -#define S5PC110_VIC0_BASE 0xF2000000 -#define S5PC110_VIC1_BASE 0xF2100000 -#define S5PC110_VIC2_BASE 0xF2200000 -#define S5PC110_VIC3_BASE 0xF2300000 -#define S5PC110_OTG_BASE 0xEC000000 -#define S5PC110_PHY_BASE 0xEC100000 -#define S5PC110_USB_PHY_CONTROL 0xE010E80C +#ifndef CPU_SAMSUNG_EXYNOS5250_CPU_H +#define CPU_SAMSUNG_EXYNOS5250_CPU_H
#include <arch/io.h>
@@ -80,48 +42,6 @@
#define EXYNOS_I2C_SPACING 0x10000
-enum boot_mode { - /* - * Assign the OM pin values for respective boot modes. - * Exynos4 does not support spi boot and the mmc boot OM - * pin values are the same across Exynos4 and Exynos5. - */ - BOOT_MODE_MMC = 4, - BOOT_MODE_SERIAL = 20, - /* Boot based on Operating Mode pin settings */ - BOOT_MODE_OM = 32, - BOOT_MODE_USB, /* Boot using USB download */ -}; - -/** - * Get the boot device containing BL1, BL2 (SPL) and U-boot - * - * @return boot device - */ -enum boot_mode exynos_get_boot_device(void); - -/** - * Check if a wakeup is permitted. - * - * On some boards we need to look at a special GPIO to ensure that the wakeup - * from sleep was valid. If the wakeup is not valid we need to go through a - * full reset. - * - * The default implementation of this function allows all wakeups. - * - * @return 1 if wakeup is permitted; 0 otherwise - */ -int board_wakeup_permitted(void); - -/** - * Init subsystems according to the reset status - * - * @return 0 for a normal boot, non-zero for a resume - */ -int lowlevel_init_subsystems(void); - -int arch_cpu_init(void); - /* EXYNOS5 */ #define EXYNOS5_GPIO_PART6_BASE 0x03860000 /* Z<6:0> */ #define EXYNOS5_PRO_ID 0x10000000 @@ -144,21 +64,17 @@ int arch_cpu_init(void); #define EXYNOS5_USBPHY_BASE 0x12130000 #define EXYNOS5_USBOTG_BASE 0x12140000
-#ifndef CONFIG_OF_CONTROL #define EXYNOS5_MMC_BASE 0x12200000 #define EXYNOS5_MSHC_BASE 0x12240000 -#endif
#define EXYNOS5_SROMC_BASE 0x12250000 #define EXYNOS5_UART_BASE 0x12C00000
#define EXYNOS5_SPI1_BASE 0x12D30000 -#ifndef CONFIG_OF_CONTROL #define EXYNOS5_I2C_BASE 0x12C60000 #define EXYNOS5_SPI_BASE 0x12D20000 #define EXYNOS5_PWMTIMER_BASE 0x12DD0000 #define EXYNOS5_SPI_ISP_BASE 0x131A0000 -#endif #define EXYNOS5_I2S_BASE 0x12D60000 #define EXYNOS5_GPIO_PART3_BASE 0x13400000 /* E00..H17 */ #define EXYNOS5_FIMD_BASE 0x14400000 @@ -213,9 +129,6 @@ int arch_cpu_init(void); #define EXYNOS5_SPI_NUM_CONTROLLERS 5 #define EXYNOS_I2C_MAX_CONTROLLERS 8
-/* helper function to map mmio address to peripheral id */ -enum periph_id exynos5_get_periph_id(unsigned base_addr); - void exynos5250_config_l2_cache(void);
extern struct tmu_info exynos5250_tmu_info; diff --git a/src/cpu/samsung/exynos5250/cpu_info.c b/src/cpu/samsung/exynos5250/cpu_info.c deleted file mode 100644 index 498ed85..0000000 --- a/src/cpu/samsung/exynos5250/cpu_info.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright (C) 2009 Samsung Electronics - * Minkyu Kang mk7.kang@samsung.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <console/console.h> -#include <common.h> -#include <arch/io.h> - -#include <cpu/samsung/exynos5250/clk.h> -#include <cpu/samsung/exynos5250/clock.h> -#include <cpu/samsung/exynos5250/cpu.h> -#include <cpu/samsung/exynos5250/dmc.h> - -/* FIXME(dhendrix): consolidate samsung ID code/#defines to a common location */ -#include <cpu/samsung/exynos5250/setup.h> /* cpu_info_init() prototype */ - -static unsigned int s5p_cpu_id; -static unsigned int s5p_cpu_rev; - -static void s5p_set_cpu_id(void) -{ - s5p_cpu_id = readl((void *)EXYNOS_PRO_ID); - s5p_cpu_id = (0xC000 | ((s5p_cpu_id & 0x00FFF000) >> 12)); - - /* - * 0xC200: EXYNOS4210 EVT0 - * 0xC210: EXYNOS4210 EVT1 - */ - if (s5p_cpu_id == 0xC200) { - s5p_cpu_id |= 0x10; - s5p_cpu_rev = 0; - } else if (s5p_cpu_id == 0xC210) { - s5p_cpu_rev = 1; - } -} - -int arch_cpu_init(void) -{ - s5p_set_cpu_id(); - - printk(BIOS_INFO, "CPU: S5P%X @ %ldMHz\n", - s5p_cpu_id, get_arm_clk() / (1024*1024)); - - return 0; -} diff --git a/src/cpu/samsung/exynos5250/dmc.h b/src/cpu/samsung/exynos5250/dmc.h index 0814c07..d676aa7 100644 --- a/src/cpu/samsung/exynos5250/dmc.h +++ b/src/cpu/samsung/exynos5250/dmc.h @@ -1,5 +1,22 @@ -#ifndef __DMC_H__ -#define __DMC_H__ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef CPU_SAMSUNG_EXYNOS5250_DMC_H +#define CPU_SAMSUNG_EXYNOS5250_DMC_H
#ifndef __ASSEMBLER__ struct exynos5_dmc { diff --git a/src/cpu/samsung/exynos5250/dmc_common.c b/src/cpu/samsung/exynos5250/dmc_common.c index bcfc9fe..55388ac 100644 --- a/src/cpu/samsung/exynos5250/dmc_common.c +++ b/src/cpu/samsung/exynos5250/dmc_common.c @@ -1,15 +1,11 @@ /* - * Mem setup common file for different types of DDR present on SMDK5250 boards. + * This file is part of the coreboot project. * * Copyright (C) 2012 Samsung Electronics * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -18,19 +14,18 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Mem setup common file for different types of DDR present on SMDK5250 boards. */
+#include <console/console.h> #include <arch/io.h> -#include <assert.h> #include <delay.h> -#include <console/console.h> -#include <cpu/samsung/exynos5250/setup.h> -#include <cpu/samsung/exynos5250/dmc.h> -#include <cpu/samsung/exynos5250/clock_init.h> - -#include "clock_init.h" +#include "setup.h" +#include "dmc.h" +#include "clk.h" #include "setup.h"
#define ZQ_INIT_TIMEOUT 10000 diff --git a/src/cpu/samsung/exynos5250/dmc_init_ddr3.c b/src/cpu/samsung/exynos5250/dmc_init_ddr3.c index 3dc9b47..cb5c613 100644 --- a/src/cpu/samsung/exynos5250/dmc_init_ddr3.c +++ b/src/cpu/samsung/exynos5250/dmc_init_ddr3.c @@ -1,15 +1,11 @@ /* - * DDR3 mem setup file for SMDK5250 board based on EXYNOS5 + * This file is part of the coreboot project. * * Copyright (C) 2012 Samsung Electronics * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -18,21 +14,18 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#include <config.h> +/* DDR3 mem setup file for SMDK5250 board based on EXYNOS5 */ + +#include <console/console.h> #include <delay.h> #include <arch/io.h> -#include <console/console.h> -/* FIXME(dhendrix): untangle clock/clk ... */ -#include <cpu/samsung/exynos5250/clock.h> #include "clk.h" #include "cpu.h" #include "dmc.h" #include "setup.h" -#include "clock_init.h"
#define RDLVL_COMPLETE_TIMEOUT 10000
diff --git a/src/cpu/samsung/exynos5250/dp-core.h b/src/cpu/samsung/exynos5250/dp-core.h new file mode 100644 index 0000000..144524d --- /dev/null +++ b/src/cpu/samsung/exynos5250/dp-core.h @@ -0,0 +1,268 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2013 Google Inc. + * Copyright (C) 2012 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Header file for Samsung DP (Display Port) interface driver. */ + +#ifndef CPU_SAMSUNG_EXYNOS5250_DP_CORE_H +#define CPU_SAMSUNG_EXYNOS5250_DP_CORE_H + +#define STREAM_ON_TIMEOUT 100 +#define PLL_LOCK_TIMEOUT 10 +#define DP_INIT_TRIES 10 +#define MAX_CR_LOOP 5 +#define MAX_EQ_LOOP 4 + +/* Link tare type */ +enum link_rate { + LINK_RATE_1_62GBPS = 0x06, + LINK_RATE_2_70GBPS = 0x0a +}; + +/* Number of lanes supported */ +enum link_lane_count { + LANE_COUNT1 = 1, + LANE_COUNT2 = 2, + LANE_COUNT4 = 4 +}; + +/* Pre emphasis level */ +enum pre_emphasis_level { + PRE_EMPHASIS_LEVEL_0, + PRE_EMPHASIS_LEVEL_1, + PRE_EMPHASIS_LEVEL_2, + PRE_EMPHASIS_LEVEL_3, +}; + +/* Type of color space */ +enum color_space { + COLOR_RGB, + COLOR_YCBCR422, + COLOR_YCBCR444 +}; + +/* Video input Bit Per Color */ +enum color_depth { + COLOR_6, + COLOR_8, + COLOR_10, + COLOR_12 +}; + +/* Type of YCbCr coefficient */ +enum color_coefficient { + COLOR_YCBCR601, + COLOR_YCBCR709 +}; + +/* Color range */ +enum dynamic_range { + VESA, + CEA +}; + +/* Status of PLL clock */ +enum pll_status { + PLL_UNLOCKED, + PLL_LOCKED +}; + +/* To choose type of m_value */ +enum clock_recovery_m_value_type { + CALCULATED_M, + REGISTER_M +}; + +struct video_info { + enum color_space color_space; + enum dynamic_range dynamic_range; + enum color_coefficient ycbcr_coeff; + enum color_depth color_depth; + + enum link_rate link_rate; + enum link_lane_count lane_count; + + char *name; + + unsigned int h_sync_polarity:1; + unsigned int v_sync_polarity:1; + unsigned int interlaced:1; +}; + +struct link_train { + u8 link_rate; + u8 lane_count; +}; + +struct s5p_dp_device { + unsigned int irq; + struct exynos5_dp *base; + struct video_info *video_info; + struct link_train link_train; +}; + +/* this struct is used by mainboards to pass mode info to the driver */ +typedef struct vidinfo { + u16 vl_col; + u16 vl_row; + u8 vl_bpix; + u16 *cmap; +} vidinfo_t; + +/* s5p_dp_reg.c */ + +/* + * Reset DP module + * + * param dp pointer to main s5p-dp structure + */ +void s5p_dp_reset(struct s5p_dp_device *dp); +/* + * Initialize DP to recieve video stream + * + * param dp pointer to main s5p-dp structure + */ +void s5p_dp_init_video(struct s5p_dp_device *dp); +/* + * Check whether PLL is locked + * + * param dp pointer to main s5p-dp structure + * return Lock status + */ +unsigned int s5p_dp_get_pll_lock_status(struct s5p_dp_device *dp); +/* + * Initialize analog functions of DP + * + * param dp pointer to main s5p-dp structure + * return 0 on success + */ +int s5p_dp_init_analog_func(struct s5p_dp_device *dp); +/* + * Initialize DP for AUX transaction + * + * param dp pointer to main s5p-dp structure + */ +void s5p_dp_init_aux(struct s5p_dp_device *dp); + +/* + * Start an AUX transaction. + * + * param dp pointer to main s5p-dp structure + */ +int s5p_dp_start_aux_transaction(struct s5p_dp_device *dp); + +/* + * Write a byte to DPCD register + * + * param dp pointer to main s5p-dp structure + * param reg_addr DPCD register to be written + * param data byte data to be written + * return write status + */ +int s5p_dp_write_byte_to_dpcd(struct s5p_dp_device *dp, + unsigned int reg_addr, + unsigned char data); +/* + * Read a byte from DPCD register + * + * param dp pointer to main s5p-dp structure + * param reg_addr DPCD register to read + * param data read byte data + * return read status + */ +int s5p_dp_read_byte_from_dpcd(struct s5p_dp_device *dp, + unsigned int reg_addr, + unsigned char *data); +/* + * Initialize DP video functions + * + * param dp pointer to main s5p-dp structure + */ +//void s5p_dp_init_video(struct s5p_dp_device *dp); + +/* + * Set color parameters for display + * + * param dp pointer to main s5p-dp structure + * param color_depth Video input Bit Per Color + * param color_space Colorimetric format of input video + * param dynamic_range VESA range or CEA range + * param coeff YCbCr Coefficients of input video + */ +void s5p_dp_set_video_color_format(struct s5p_dp_device *dp, + unsigned int color_depth, + unsigned int color_space, + unsigned int dynamic_range, + unsigned int coeff); +/* + * Check whether video clock is on + * + * param dp pointer to main s5p-dp structure + * return clock status + */ +int s5p_dp_is_slave_video_stream_clock_on(struct s5p_dp_device *dp); +/* + * Check whether video clock is on + * + * param dp pointer to main s5p-dp structure + * param type clock_recovery_m_value_type + * param m_value to caluculate m_vid value + * param n_value to caluculate n_vid value + */ +void s5p_dp_set_video_cr_mn(struct s5p_dp_device *dp, + enum clock_recovery_m_value_type type, + unsigned int m_value, + unsigned int n_value); +/* + * Set DP to video slave mode thereby enabling video master + * + * param dp pointer to main s5p-dp structure + */ +void s5p_dp_enable_video_master(struct s5p_dp_device *dp); +/* + * Check whether video stream is on + * + * param dp pointer to main s5p-dp structure + * return video stream status + */ +int s5p_dp_is_video_stream_on(struct s5p_dp_device *dp); +/* + * Configure DP in slave mode + * + * param dp pointer to main s5p-dp structure + * param video_info pointer to main video_info structure. + */ +void s5p_dp_config_video_slave_mode(struct s5p_dp_device *dp, + struct video_info *video_info); + +/* + * Wait unitl HW link training done + * + * param dp pointer to main s5p-dp structure + */ +void s5p_dp_wait_hw_link_training_done(struct s5p_dp_device *dp); + +/* startup and init */ +struct exynos5_fimd_panel; +void fb_init(vidinfo_t *panel_info, void *lcdbase, + struct exynos5_fimd_panel *pd); +int dp_controller_init(struct s5p_dp_device *dp_device); +int lcd_ctrl_init(vidinfo_t *panel_info, + struct exynos5_fimd_panel *panel_data, void *lcdbase); +#endif /* CPU_SAMSUNG_EXYNOS5250_DP_CORE_H */ diff --git a/src/cpu/samsung/exynos5250/dp-reg.c b/src/cpu/samsung/exynos5250/dp-reg.c new file mode 100644 index 0000000..eb53356 --- /dev/null +++ b/src/cpu/samsung/exynos5250/dp-reg.c @@ -0,0 +1,495 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Samsung DP (Display port) register interface driver. */ + +#include <console/console.h> +#include <arch/io.h> +#include <delay.h> +#include "timer.h" +#include "clk.h" +#include "cpu.h" +#include "periph.h" +#include "dp.h" +#include "fimd.h" +#include "dp-core.h" + +void s5p_dp_reset(struct s5p_dp_device *dp) +{ + u32 reg; + struct exynos5_dp *base = dp->base; + + writel(RESET_DP_TX, &base->dp_tx_sw_reset); + + /* Stop Video */ + clrbits_le32(&base->video_ctl_1, VIDEO_EN); + clrbits_le32(&base->video_ctl_1, HDCP_VIDEO_MUTE); + + reg = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N | + AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N | + HDCP_FUNC_EN_N | SW_FUNC_EN_N; + writel(reg, &base->func_en_1); + + reg = SSC_FUNC_EN_N | AUX_FUNC_EN_N | + SERDES_FIFO_FUNC_EN_N | + LS_CLK_DOMAIN_FUNC_EN_N; + writel(reg, &base->func_en_2); + + udelay(20); + + reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 | + LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0; + + writel(reg, &base->lane_map); + + writel(0x0, &base->sys_ctl_1); + writel(0x40, &base->sys_ctl_2); + writel(0x0, &base->sys_ctl_3); + writel(0x0, &base->sys_ctl_4); + + writel(0x0, &base->pkt_send_ctl); + writel(0x0, &base->dp_hdcp_ctl); + + writel(0x5e, &base->dp_hpd_deglitch_l); + writel(0x1a, &base->dp_hpd_deglitch_h); + + writel(0x10, &base->dp_debug_ctl); + + writel(0x0, &base->dp_phy_test); + + writel(0x0, &base->dp_video_fifo_thrd); + writel(0x20, &base->dp_audio_margin); + + writel(0x4, &base->m_vid_gen_filter_th); + writel(0x2, &base->m_aud_gen_filter_th); + + writel(0x00000101, &base->soc_general_ctl); + + /* Set Analog Parameters */ + writel(0x10, &base->analog_ctl_1); + writel(0x0C, &base->analog_ctl_2); + writel(0x85, &base->analog_ctl_3); + writel(0x66, &base->pll_filter_ctl_1); + writel(0x0, &base->tx_amp_tuning_ctl); + + /* Set interrupt pin assertion polarity as high */ + writel(INT_POL0 | INT_POL1, &base->int_ctl); + + /* Clear pending regisers */ + writel(0xff, &base->common_int_sta_1); + writel(0x4f, &base->common_int_sta_2); + writel(0xe0, &base->common_int_sta_3); + writel(0xe7, &base->common_int_sta_4); + writel(0x63, &base->dp_int_sta); + + /* 0:mask,1: unmask */ + writel(0x00, &base->common_int_mask_1); + writel(0x00, &base->common_int_mask_2); + writel(0x00, &base->common_int_mask_3); + writel(0x00, &base->common_int_mask_4); + writel(0x00, &base->int_sta_mask); +} + +unsigned int s5p_dp_get_pll_lock_status(struct s5p_dp_device *dp) +{ + u32 reg; + + reg = readl(&dp->base->dp_debug_ctl); + if (reg & PLL_LOCK) + return PLL_LOCKED; + else + return PLL_UNLOCKED; +} + +int s5p_dp_init_analog_func(struct s5p_dp_device *dp) +{ + u32 reg; + u32 start; + struct exynos5_dp *base = dp->base; + + writel(0x00, &base->dp_phy_pd); + + reg = PLL_LOCK_CHG; + writel(reg, &base->common_int_sta_1); + + clrbits_le32(&base->dp_debug_ctl, (F_PLL_LOCK | PLL_LOCK_CTRL)); + + /* Power up PLL */ + if (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { + + clrbits_le32(&base->dp_pll_ctl, DP_PLL_PD); + + start = get_timer(0); + while (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { + if (get_timer(start) > PLL_LOCK_TIMEOUT) { + printk(BIOS_ERR, "%s: PLL is not locked\n", + __func__); + return -1; + } + } + } + + /* Enable Serdes FIFO function and Link symbol clock domain module */ + clrbits_le32(&base->func_en_2, (SERDES_FIFO_FUNC_EN_N | + LS_CLK_DOMAIN_FUNC_EN_N | AUX_FUNC_EN_N)); + return 0; +} + +void s5p_dp_init_aux(struct s5p_dp_device *dp) +{ + u32 reg; + struct exynos5_dp *base = dp->base; + + /* Clear inerrupts related to AUX channel */ + reg = RPLY_RECEIV | AUX_ERR; + writel(reg, &base->dp_int_sta); + + /* Disable AUX channel module */ + setbits_le32(&base->func_en_2, AUX_FUNC_EN_N); + + /* Disable AUX transaction H/W retry */ + reg = (3 & AUX_BIT_PERIOD_MASK) << AUX_BIT_PERIOD_SHIFT; + reg |= (0 & AUX_HW_RETRY_COUNT_MASK) << AUX_HW_RETRY_COUNT_SHIFT; + reg |= (AUX_HW_RETRY_INTERVAL_600_US << AUX_HW_RETRY_INTERVAL_SHIFT); + writel(reg, &base->aux_hw_retry_ctl) ; + + /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */ + reg = DEFER_CTRL_EN; + reg |= (1 & DEFER_COUNT_MASK) << DEFER_COUNT_SHIFT; + writel(reg, &base->aux_ch_defer_dtl); + + /* Enable AUX channel module */ + clrbits_le32(&base->func_en_2, AUX_FUNC_EN_N); +} + +int s5p_dp_start_aux_transaction(struct s5p_dp_device *dp) +{ + int reg; + struct exynos5_dp *base = dp->base; + + /* Enable AUX CH operation */ + setbits_le32(&base->aux_ch_ctl_2, AUX_EN); + + /* Is AUX CH command reply received? */ + reg = readl(&base->dp_int_sta); + while (!(reg & RPLY_RECEIV)) + reg = readl(&base->dp_int_sta); + + /* Clear interrupt source for AUX CH command reply */ + writel(RPLY_RECEIV, &base->dp_int_sta); + + /* Clear interrupt source for AUX CH access error */ + reg = readl(&base->dp_int_sta); + if (reg & AUX_ERR) { + printk(BIOS_ERR, "%s: AUX_ERR encountered, dp_int_sta: " + "0x%02x\n", __func__, reg); + writel(AUX_ERR, &base->dp_int_sta); + return -1; + } + + /* Check AUX CH error access status */ + reg = readl(&base->dp_int_sta); + if ((reg & AUX_STATUS_MASK) != 0) { + printk(BIOS_ERR, "AUX CH error happens: %d\n\n", + reg & AUX_STATUS_MASK); + return -1; + } + + return 0; +} + +int s5p_dp_write_byte_to_dpcd(struct s5p_dp_device *dp, + unsigned int reg_addr, + unsigned char data) +{ + u32 reg; + int i; + int retval; + struct exynos5_dp *base = dp->base; + + for (i = 0; i < MAX_AUX_RETRY_COUNT; i++) { + /* Clear AUX CH data buffer */ + writel(BUF_CLR, &base->buf_data_ctl); + + /* Select DPCD device address */ + reg = reg_addr >> AUX_ADDR_7_0_SHIFT; + reg &= AUX_ADDR_7_0_MASK; + writel(reg, &base->aux_addr_7_0); + reg = reg_addr >> AUX_ADDR_15_8_SHIFT; + reg &= AUX_ADDR_15_8_MASK; + writel(reg, &base->aux_addr_15_8); + reg = reg_addr >> AUX_ADDR_19_16_SHIFT; + reg &= AUX_ADDR_19_16_MASK; + writel(reg, &base->aux_addr_19_16); + + /* Write data buffer */ + reg = (unsigned int)data; + writel(reg, &base->buf_data_0); + + /* + * Set DisplayPort transaction and write 1 byte + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; + writel(reg, &base->aux_ch_ctl_1); + + /* Start AUX transaction */ + retval = s5p_dp_start_aux_transaction(dp); + if (retval == 0) + break; + else + printk(BIOS_DEBUG, "Aux Transaction fail!\n"); + } + + return retval; +} + +int s5p_dp_read_byte_from_dpcd(struct s5p_dp_device *dp, + unsigned int reg_addr, + unsigned char *data) +{ + u32 reg; + int i; + int retval; + struct exynos5_dp *base = dp->base; + + for (i = 0; i < MAX_AUX_RETRY_COUNT; i++) { + /* Clear AUX CH data buffer */ + writel(BUF_CLR, &base->buf_data_ctl); + + /* Select DPCD device address */ + reg = reg_addr >> AUX_ADDR_7_0_SHIFT; + reg &= AUX_ADDR_7_0_MASK; + writel(reg, &base->aux_addr_7_0); + reg = reg_addr >> AUX_ADDR_15_8_SHIFT; + reg &= AUX_ADDR_15_8_MASK; + writel(reg, &base->aux_addr_15_8); + reg = reg_addr >> AUX_ADDR_19_16_SHIFT; + reg &= AUX_ADDR_19_16_MASK; + writel(reg, &base->aux_addr_19_16); + + /* + * Set DisplayPort transaction and read 1 byte + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; + writel(reg, &base->aux_ch_ctl_1); + + /* Start AUX transaction */ + retval = s5p_dp_start_aux_transaction(dp); + if (retval == 0) + break; + else + printk(BIOS_DEBUG, "Aux Transaction fail!\n"); + } + + /* Read data buffer */ + if (!retval) { + reg = readl(&base->buf_data_0); + *data = (unsigned char)(reg & 0xff); + } + + return retval; +} + +void s5p_dp_init_video(struct s5p_dp_device *dp) +{ + u32 reg; + struct exynos5_dp *base = dp->base; + + reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG; + writel(reg, &base->common_int_sta_1); + + reg = 0x0; + writel(reg, &base->sys_ctl_1); + + reg = (4 & CHA_CRI_MASK) << CHA_CRI_SHIFT; + reg |= CHA_CTRL; + writel(reg, &base->sys_ctl_2); + + reg = 0x0; + writel(reg, &base->sys_ctl_3); +} + +void s5p_dp_set_video_color_format(struct s5p_dp_device *dp, + unsigned int color_depth, + unsigned int color_space, + unsigned int dynamic_range, + unsigned int coeff) +{ + u32 reg; + struct exynos5_dp *base = dp->base; + + /* Configure the input color depth, color space, dynamic range */ + reg = (dynamic_range << IN_D_RANGE_SHIFT) | + (color_depth << IN_BPC_SHIFT) | + (color_space << IN_COLOR_F_SHIFT); + writel(reg, &base->video_ctl_2); + + /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */ + reg = readl(&base->video_ctl_3); + reg &= ~IN_YC_COEFFI_MASK; + if (coeff) + reg |= IN_YC_COEFFI_ITU709; + else + reg |= IN_YC_COEFFI_ITU601; + writel(reg, &base->video_ctl_3); +} + +int s5p_dp_is_slave_video_stream_clock_on(struct s5p_dp_device *dp) +{ + u32 reg; + struct exynos5_dp *base = dp->base; + + reg = readl(&base->sys_ctl_1); + writel(reg, &base->sys_ctl_1); + + reg = readl(&base->sys_ctl_1); + + if (!(reg & DET_STA)) + return -1; + + reg = readl(&base->sys_ctl_2); + writel(reg, &base->sys_ctl_2); + + reg = readl(&base->sys_ctl_2); + + if (reg & CHA_STA) { + printk(BIOS_DEBUG, "Input stream clk is changing\n"); + return -1; + } + + return 0; +} + +void s5p_dp_set_video_cr_mn(struct s5p_dp_device *dp, + enum clock_recovery_m_value_type type, + unsigned int m_value, + unsigned int n_value) +{ + u32 reg; + struct exynos5_dp *base = dp->base; + + if (type == REGISTER_M) { + setbits_le32(&base->sys_ctl_4, FIX_M_VID); + + reg = m_value >> M_VID_0_VALUE_SHIFT; + writel(reg, &base->m_vid_0); + + reg = (m_value >> M_VID_1_VALUE_SHIFT); + writel(reg, &base->m_vid_1); + + reg = (m_value >> M_VID_2_VALUE_SHIFT); + writel(reg, &base->m_vid_2); + + reg = n_value >> N_VID_0_VALUE_SHIFT; + writel(reg, &base->n_vid_0); + + reg = (n_value >> N_VID_1_VALUE_SHIFT); + writel(reg, &base->n_vid_1); + + reg = (n_value >> N_VID_2_VALUE_SHIFT); + writel(reg, &base->n_vid_2); + } else { + clrbits_le32(&base->sys_ctl_4, FIX_M_VID); + + writel(0x00, &base->n_vid_0); + writel(0x80, &base->n_vid_1); + writel(0x00, &base->n_vid_2); + } +} + +void s5p_dp_enable_video_master(struct s5p_dp_device *dp) +{ + u32 reg; + struct exynos5_dp *base = dp->base; + + reg = readl(&base->soc_general_ctl); + reg &= ~VIDEO_MODE_MASK; + reg |= VIDEO_MODE_SLAVE_MODE; + writel(reg, &base->soc_general_ctl); +} + +int s5p_dp_is_video_stream_on(struct s5p_dp_device *dp) +{ + u32 reg, i = 0; + u32 start; + struct exynos5_dp *base = dp->base; + + /* Wait for 4 VSYNC_DET interrupts */ + start = get_timer(0); + do { + reg = readl(&base->common_int_sta_1); + if (reg & VSYNC_DET) { + i++; + writel(reg | VSYNC_DET, &base->common_int_sta_1); + } + if (i == 4) + break; + } while (get_timer(start) <= STREAM_ON_TIMEOUT); + + if (i != 4) { + printk(BIOS_DEBUG, "s5p_dp_is_video_stream_on timeout\n"); + return -1; + } + + return 0; +} + +void s5p_dp_config_video_slave_mode(struct s5p_dp_device *dp, + struct video_info *video_info) +{ + u32 reg; + struct exynos5_dp *base = dp->base; + + reg = readl(&base->func_en_1); + reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N); + reg |= MASTER_VID_FUNC_EN_N; + writel(reg, &base->func_en_1); + + reg = readl(&base->video_ctl_10); + reg &= ~INTERACE_SCAN_CFG; + reg |= (video_info->interlaced << 2); + writel(reg, &base->video_ctl_10); + + reg = readl(&base->video_ctl_10); + reg &= ~VSYNC_POLARITY_CFG; + reg |= (video_info->v_sync_polarity << 1); + writel(reg, &base->video_ctl_10); + + reg = readl(&base->video_ctl_10); + reg &= ~HSYNC_POLARITY_CFG; + reg |= (video_info->h_sync_polarity << 0); + writel(reg, &base->video_ctl_10); + + reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE; + writel(reg, &base->soc_general_ctl); +} + +void s5p_dp_wait_hw_link_training_done(struct s5p_dp_device *dp) +{ + u32 reg; + struct exynos5_dp *base = dp->base; + + reg = readl(&base->dp_hw_link_training); + while (reg & HW_TRAINING_EN) + reg = readl(&base->dp_hw_link_training); +} diff --git a/src/cpu/samsung/exynos5250/dp.h b/src/cpu/samsung/exynos5250/dp.h new file mode 100644 index 0000000..5c778ba --- /dev/null +++ b/src/cpu/samsung/exynos5250/dp.h @@ -0,0 +1,497 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2013 Google Inc. + * Copyright (C) 2012 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Register map for Exynos5 DP */ + +#ifndef CPU_SAMSUNG_EXYNOS5250_DP_H +#define CPU_SAMSUNG_EXYNOS5250_DP_H + +/* DSIM register map */ +struct exynos5_dp { + u8 res1[0x10]; + u32 dp_tx_version; + u32 dp_tx_sw_reset; + u32 func_en_1; + u32 func_en_2; + u32 video_ctl_1; + u32 video_ctl_2; + u32 video_ctl_3; + u32 video_ctl_4; + u32 clr_blue_cb; + u32 clr_green_y; + u32 clr_red_cr; + u32 video_ctl_8; + u8 res2[0x4]; + u32 video_ctl_10; + u32 total_line_l; + u32 total_line_h; + u32 active_line_l; + u32 active_line_h; + u32 v_f_porch; + u32 vsync; + u32 v_b_porch; + u32 total_pixel_l; + u32 total_pixel_h; + u32 active_pixel_l; + u32 active_pixel_h; + u32 h_f_porch_l; + u32 h_f_porch_h; + u32 hsync_l; + u32 hysnc_h; + u32 h_b_porch_l; + u32 h_b_porch_h; + u32 vid_status; + u32 total_line_sta_l; + u32 total_line_sta_h; + u32 active_line_sta_l; + u32 active_line_sta_h; + u32 v_f_porch_sta; + u32 vsync_sta; + u32 v_b_porch_sta; + u32 total_pixel_sta_l; + u32 total_pixel_sta_h; + u32 active_pixel_sta_l; + u32 active_pixel_sta_h; + u32 h_f_porch_sta_l; + u32 h_f_porch_sta_h; + u32 hsync_sta_l; + u32 hsync_sta_h; + u32 h_b_porch_sta_l; + u32 h_b_porch__sta_h; + u8 res3[0x288]; + u32 lane_map; + u8 res4[0x10]; + u32 analog_ctl_1; + u32 analog_ctl_2; + u32 analog_ctl_3; + u32 pll_filter_ctl_1; + u32 tx_amp_tuning_ctl; + u8 res5[0xc]; + u32 aux_hw_retry_ctl; + u8 res6[0x2c]; + u32 int_state; + u32 common_int_sta_1; + u32 common_int_sta_2; + u32 common_int_sta_3; + u32 common_int_sta_4; + u8 res7[0x8]; + u32 dp_int_sta; + u32 common_int_mask_1; + u32 common_int_mask_2; + u32 common_int_mask_3; + u32 common_int_mask_4; + u8 res8[0x08]; + u32 int_sta_mask; + u32 int_ctl; + u8 res9[0x200]; + u32 sys_ctl_1; + u32 sys_ctl_2; + u32 sys_ctl_3; + u32 sys_ctl_4; + u32 dp_vid_ctl; + u8 res10[0x2c]; + u32 pkt_send_ctl; + u8 res11[0x4]; + u32 dp_hdcp_ctl; + u8 res12[0x34]; + u32 link_bw_set; + u32 lane_count_set; + u32 dp_training_ptn_set; + u32 ln0_link_trn_ctl; + u32 ln1_link_trn_ctl; + u32 ln2_link_trn_ctl; + u32 ln3_link_trn_ctl; + u32 dp_dn_spread; + u32 dp_hw_link_training; + u8 res13[0x1c]; + u32 dp_debug_ctl; + u32 dp_hpd_deglitch_l; + u32 dp_hpd_deglitch_h; + u8 res14[0x14]; + u32 dp_link_debug_ctl; + u8 res15[0x1c]; + u32 m_vid_0; + u32 m_vid_1; + u32 m_vid_2; + u32 n_vid_0; + u32 n_vid_1; + u32 n_vid_2; + u32 m_vid_mon; + u32 dp_pll_ctl; + u32 dp_phy_pd; + u32 dp_phy_test; + u8 res16[0x8]; + u32 dp_video_fifo_thrd; + u8 res17[0x8]; + u32 dp_audio_margin; + u32 dp_dn_spread_ctl_1; + u32 dp_dn_spread_ctl_2; + u8 res18[0x18]; + u32 dp_m_cal_ctl; + u32 m_vid_gen_filter_th; + u8 res19[0x14]; + u32 m_aud_gen_filter_th; + u32 aux_ch_sta; + u32 aux_err_num; + u32 aux_ch_defer_dtl; + u32 aux_rx_comm; + u32 buf_data_ctl; + u32 aux_ch_ctl_1; + u32 aux_addr_7_0; + u32 aux_addr_15_8; + u32 aux_addr_19_16; + u32 aux_ch_ctl_2; + u8 res20[0x18]; + u32 buf_data_0; + u8 res21[0x3c]; + u32 soc_general_ctl; +}; +/* DP_TX_SW_RESET */ +#define RESET_DP_TX (1 << 0) + +/* DP_FUNC_EN_1 */ +#define MASTER_VID_FUNC_EN_N (1 << 7) +#define SLAVE_VID_FUNC_EN_N (1 << 5) +#define AUD_FIFO_FUNC_EN_N (1 << 4) +#define AUD_FUNC_EN_N (1 << 3) +#define HDCP_FUNC_EN_N (1 << 2) +#define CRC_FUNC_EN_N (1 << 1) +#define SW_FUNC_EN_N (1 << 0) + +/* DP_FUNC_EN_2 */ +#define SSC_FUNC_EN_N (1 << 7) +#define AUX_FUNC_EN_N (1 << 2) +#define SERDES_FIFO_FUNC_EN_N (1 << 1) +#define LS_CLK_DOMAIN_FUNC_EN_N (1 << 0) + +/* DP_VIDEO_CTL_1 */ +#define VIDEO_EN (1 << 7) +#define HDCP_VIDEO_MUTE (1 << 6) + +/* DP_VIDEO_CTL_1 */ +#define IN_D_RANGE_MASK (1 << 7) +#define IN_D_RANGE_SHIFT (7) +#define IN_D_RANGE_CEA (1 << 7) +#define IN_D_RANGE_VESA (0 << 7) +#define IN_BPC_MASK (7 << 4) +#define IN_BPC_SHIFT (4) +#define IN_BPC_12_BITS (3 << 4) +#define IN_BPC_10_BITS (2 << 4) +#define IN_BPC_8_BITS (1 << 4) +#define IN_BPC_6_BITS (0 << 4) +#define IN_COLOR_F_MASK (3 << 0) +#define IN_COLOR_F_SHIFT (0) +#define IN_COLOR_F_YCBCR444 (2 << 0) +#define IN_COLOR_F_YCBCR422 (1 << 0) +#define IN_COLOR_F_RGB (0 << 0) + +/* DP_VIDEO_CTL_3 */ +#define IN_YC_COEFFI_MASK (1 << 7) +#define IN_YC_COEFFI_SHIFT (7) +#define IN_YC_COEFFI_ITU709 (1 << 7) +#define IN_YC_COEFFI_ITU601 (0 << 7) +#define VID_CHK_UPDATE_TYPE_MASK (1 << 4) +#define VID_CHK_UPDATE_TYPE_SHIFT (4) +#define VID_CHK_UPDATE_TYPE_1 (1 << 4) +#define VID_CHK_UPDATE_TYPE_0 (0 << 4) + +/* DP_VIDEO_CTL_10 */ +#define FORMAT_SEL (1 << 4) +#define INTERACE_SCAN_CFG (1 << 2) +#define VSYNC_POLARITY_CFG (1 << 1) +#define HSYNC_POLARITY_CFG (1 << 0) + +/* DP_LANE_MAP */ +#define LANE3_MAP_LOGIC_LANE_0 (0 << 6) +#define LANE3_MAP_LOGIC_LANE_1 (1 << 6) +#define LANE3_MAP_LOGIC_LANE_2 (2 << 6) +#define LANE3_MAP_LOGIC_LANE_3 (3 << 6) +#define LANE2_MAP_LOGIC_LANE_0 (0 << 4) +#define LANE2_MAP_LOGIC_LANE_1 (1 << 4) +#define LANE2_MAP_LOGIC_LANE_2 (2 << 4) +#define LANE2_MAP_LOGIC_LANE_3 (3 << 4) +#define LANE1_MAP_LOGIC_LANE_0 (0 << 2) +#define LANE1_MAP_LOGIC_LANE_1 (1 << 2) +#define LANE1_MAP_LOGIC_LANE_2 (2 << 2) +#define LANE1_MAP_LOGIC_LANE_3 (3 << 2) +#define LANE0_MAP_LOGIC_LANE_0 (0 << 0) +#define LANE0_MAP_LOGIC_LANE_1 (1 << 0) +#define LANE0_MAP_LOGIC_LANE_2 (2 << 0) +#define LANE0_MAP_LOGIC_LANE_3 (3 << 0) + +/* DP_AUX_HW_RETRY_CTL */ +#define AUX_BIT_PERIOD_SHIFT 8 +#define AUX_BIT_PERIOD_MASK 7 + +#define AUX_HW_RETRY_INTERVAL_SHIFT 3 +#define AUX_HW_RETRY_INTERVAL_600_US 0 +#define AUX_HW_RETRY_INTERVAL_800_US 1 +#define AUX_HW_RETRY_INTERVAL_1000_US 2 +#define AUX_HW_RETRY_INTERVAL_1800_US 3 +#define AUX_HW_RETRY_COUNT_SHIFT 0 +#define AUX_HW_RETRY_COUNT_MASK 7 + +/* DP_COMMON_INT_STA_1 */ +#define VSYNC_DET (1 << 7) +#define PLL_LOCK_CHG (1 << 6) +#define SPDIF_ERR (1 << 5) +#define SPDIF_UNSTBL (1 << 4) +#define VID_FORMAT_CHG (1 << 3) +#define AUD_CLK_CHG (1 << 2) +#define VID_CLK_CHG (1 << 1) +#define SW_INT (1 << 0) + +/* DP_COMMON_INT_STA_2 */ +#define ENC_EN_CHG (1 << 6) +#define HW_BKSV_RDY (1 << 3) +#define HW_SHA_DONE (1 << 2) +#define HW_AUTH_STATE_CHG (1 << 1) +#define HW_AUTH_DONE (1 << 0) + +/* DP_COMMON_INT_STA_3 */ +#define AFIFO_UNDER (1 << 7) +#define AFIFO_OVER (1 << 6) +#define R0_CHK_FLAG (1 << 5) + +/* DP_COMMON_INT_STA_4 */ +#define PSR_ACTIVE (1 << 7) +#define PSR_INACTIVE (1 << 6) +#define SPDIF_BI_PHASE_ERR (1 << 5) +#define HOTPLUG_CHG (1 << 2) +#define HPD_LOST (1 << 1) +#define PLUG (1 << 0) + +/* DP_INT_STA */ +#define INT_HPD (1 << 6) +#define HW_TRAINING_FINISH (1 << 5) +#define RPLY_RECEIV (1 << 1) +#define AUX_ERR (1 << 0) + +/* DP_INT_CTL */ +#define INT_POL0 (1 << 0) +#define INT_POL1 (1 << 1) +#define SOFT_INT_CTRL (1 << 2) + +/* DP_SYS_CTL_1 */ +#define DET_STA (1 << 2) +#define FORCE_DET (1 << 1) +#define DET_CTRL (1 << 0) + +/* DP_SYS_CTL_2 */ +#define CHA_CRI_SHIFT 4 +#define CHA_CRI_MASK 0xf +#define CHA_STA (1 << 2) +#define FORCE_CHA (1 << 1) +#define CHA_CTRL (1 << 0) + +/* DP_SYS_CTL_3 */ +#define HPD_STATUS (1 << 6) +#define F_HPD (1 << 5) +#define HPD_CTRL (1 << 4) +#define HDCP_RDY (1 << 3) +#define STRM_VALID (1 << 2) +#define F_VALID (1 << 1) +#define VALID_CTRL (1 << 0) + +/* DP_SYS_CTL_4 */ +#define FIX_M_AUD (1 << 4) +#define ENHANCED (1 << 3) +#define FIX_M_VID (1 << 2) +#define M_VID_UPDATE_CTRL (3 << 0) + +/* DP_TRAINING_PTN_SET */ +#define SCRAMBLER_TYPE (1 << 9) +#define HW_LINK_TRAINING_PATTERN (1 << 8) +#define SCRAMBLING_DISABLE (1 << 5) +#define SCRAMBLING_ENABLE (0 << 5) +#define LINK_QUAL_PATTERN_SET_MASK (3 << 2) +#define LINK_QUAL_PATTERN_SET_PRBS7 (3 << 2) +#define LINK_QUAL_PATTERN_SET_D10_2 (1 << 2) +#define LINK_QUAL_PATTERN_SET_DISABLE (0 << 2) +#define SW_TRAINING_PATTERN_SET_MASK (3 << 0) +#define SW_TRAINING_PATTERN_SET_PTN2 (2 << 0) +#define SW_TRAINING_PATTERN_SET_PTN1 (1 << 0) +#define SW_TRAINING_PATTERN_SET_NORMAL (0 << 0) + +/* DP_LN0_LINK_TRAINING_CTL */ +#define PRE_EMPHASIS_SET_SHIFT (3) + +/* DP_DEBUG_CTL */ +#define PLL_LOCK (1 << 4) +#define F_PLL_LOCK (1 << 3) +#define PLL_LOCK_CTRL (1 << 2) +#define PN_INV (1 << 0) + +/* DP_M_VID */ +#define M_VID_0_VALUE_SHIFT 0 +#define M_VID_1_VALUE_SHIFT 8 +#define M_VID_2_VALUE_SHIFT 16 + +/* DP_M_VID */ +#define N_VID_0_VALUE_SHIFT 0 +#define N_VID_1_VALUE_SHIFT 8 +#define N_VID_2_VALUE_SHIFT 16 + +/* DP_PLL_CTL */ +#define DP_PLL_PD (1 << 7) +#define DP_PLL_RESET (1 << 6) +#define DP_PLL_LOOP_BIT_DEFAULT (1 << 4) +#define DP_PLL_REF_BIT_1_1250V (5 << 0) +#define DP_PLL_REF_BIT_1_2500V (7 << 0) + +/* DP_PHY_PD */ +#define DP_PHY_PD (1 << 5) +#define AUX_PD (1 << 4) +#define CH3_PD (1 << 3) +#define CH2_PD (1 << 2) +#define CH1_PD (1 << 1) +#define CH0_PD (1 << 0) + +/* DP_PHY_TEST */ +#define MACRO_RST (1 << 5) +#define CH1_TEST (1 << 1) +#define CH0_TEST (1 << 0) + +/* DP_AUX_CH_STA */ +#define AUX_BUSY (1 << 4) +#define AUX_STATUS_MASK (0xf << 0) + +/* DP_AUX_CH_DEFER_CTL */ +#define DEFER_CTRL_EN (1 << 7) +#define DEFER_COUNT_SHIFT 0 +#define DEFER_COUNT_MASK 0x7f + +/* DP_AUX_RX_COMM */ +#define AUX_RX_COMM_I2C_DEFER (2 << 2) +#define AUX_RX_COMM_AUX_DEFER (2 << 0) + +/* DP_BUFFER_DATA_CTL */ +#define BUF_CLR (1 << 7) + +/* Maximum number of tries for Aux Transaction */ +#define MAX_AUX_RETRY_COUNT 10 + +/* DP_AUX_CH_CTL_1 */ +#define AUX_LENGTH_SHIFT 4 +#define AUX_LENGTH_MASK 0xf + +#define AUX_TX_COMM_MASK (0xf << 0) +#define AUX_TX_COMM_DP_TRANSACTION (1 << 3) +#define AUX_TX_COMM_I2C_TRANSACTION (0 << 3) +#define AUX_TX_COMM_MOT (1 << 2) +#define AUX_TX_COMM_WRITE (0 << 0) +#define AUX_TX_COMM_READ (1 << 0) + +/* DP_AUX_ADDR_7_0 */ +#define AUX_ADDR_7_0_SHIFT 0 +#define AUX_ADDR_7_0_MASK 0xff + +/* DP_AUX_ADDR_15_8 */ +#define AUX_ADDR_15_8_SHIFT 8 +#define AUX_ADDR_15_8_MASK 0xff + +/* DP_AUX_ADDR_19_16 */ +#define AUX_ADDR_19_16_SHIFT 16 +#define AUX_ADDR_19_16_MASK 0x0f + +/* DP_AUX_CH_CTL_2 */ +#define ADDR_ONLY (1 << 1) +#define AUX_EN (1 << 0) + +/* DP_SOC_GENERAL_CTL */ +#define AUDIO_MODE_SPDIF_MODE (1 << 8) +#define AUDIO_MODE_MASTER_MODE (0 << 8) +#define MASTER_VIDEO_INTERLACE_EN (1 << 4) +#define VIDEO_MASTER_CLK_SEL (1 << 2) +#define VIDEO_MASTER_MODE_EN (1 << 1) +#define VIDEO_MODE_MASK (1 << 0) +#define VIDEO_MODE_SLAVE_MODE (1 << 0) +#define VIDEO_MODE_MASTER_MODE (0 << 0) + +#define HW_TRAINING_ERROR_CODE (7<<4) +#define HW_TRAINING_EN (1<<0) + +/* I2C EDID Chip ID, Slave Address */ +#define I2C_EDID_DEVICE_ADDR 0x50 +#define I2C_E_EDID_DEVICE_ADDR 0x30 + +#define EDID_BLOCK_LENGTH 0x80 +#define EDID_HEADER_PATTERN 0x00 +#define EDID_EXTENSION_FLAG 0x7e +#define EDID_CHECKSUM 0x7f + +/* Definition for DPCD Register */ +#define DPCD_ADDR_DPCD_REV 0x0000 +#define DPCD_ADDR_MAX_LINK_RATE 0x0001 +#define DPCD_ADDR_MAX_LANE_COUNT 0x0002 +#define DPCD_ADDR_LINK_BW_SET 0x0100 +#define DPCD_ADDR_LANE_COUNT_SET 0x0101 +#define DPCD_ADDR_TRAINING_PATTERN_SET 0x0102 +#define DPCD_ADDR_TRAINING_LANE0_SET 0x0103 +#define DPCD_ADDR_LANE0_1_STATUS 0x0202 +#define DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED 0x0204 +#define DPCD_ADDR_ADJUST_REQUEST_LANE0_1 0x0206 +#define DPCD_ADDR_ADJUST_REQUEST_LANE2_3 0x0207 +#define DPCD_ADDR_TEST_REQUEST 0x0218 +#define DPCD_ADDR_TEST_RESPONSE 0x0260 +#define DPCD_ADDR_TEST_EDID_CHECKSUM 0x0261 +#define DPCD_ADDR_SINK_POWER_STATE 0x0600 + +/* DPCD_ADDR_MAX_LANE_COUNT */ +#define DPCD_MAX_LANE_COUNT_MASK 0x1f + +/* DPCD_ADDR_LANE_COUNT_SET */ +#define DPCD_ENHANCED_FRAME_EN (1 << 7) +#define DPCD_LANE_COUNT_SET_MASK 0x1f + +/* DPCD_ADDR_TRAINING_PATTERN_SET */ +#define DPCD_SCRAMBLING_DISABLED (1 << 5) +#define DPCD_SCRAMBLING_ENABLED (0 << 5) +#define DPCD_TRAINING_PATTERN_2 (2 << 0) +#define DPCD_TRAINING_PATTERN_1 (1 << 0) +#define DPCD_TRAINING_PATTERN_DISABLED (0 << 0) + +/* DPCD_ADDR_LANE0_1_STATUS */ +#define DPCD_LANE_SYMBOL_LOCKED (1 << 2) +#define DPCD_LANE_CHANNEL_EQ_DONE (1 << 1) +#define DPCD_LANE_CR_DONE (1 << 0) +#define DPCD_CHANNEL_EQ_BITS (DPCD_LANE_CR_DONE | \ + DPCD_LANE_CHANNEL_EQ_DONE | \ + DPCD_LANE_SYMBOL_LOCKED) + +/* DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED */ +#define DPCD_LINK_STATUS_UPDATED (1 << 7) +#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6) +#define DPCD_INTERLANE_ALIGN_DONE (1 << 0) + +/* DPCD_ADDR_TEST_REQUEST */ +#define DPCD_TEST_EDID_READ (1 << 2) + +/* DPCD_ADDR_TEST_RESPONSE */ +#define DPCD_TEST_EDID_CHECKSUM_WRITE (1 << 2) + +/* DPCD_ADDR_SINK_POWER_STATE */ +#define DPCD_SET_POWER_STATE_D0 (1 << 0) +#define DPCD_SET_POWER_STATE_D4 (2 << 0) + +/* Allow DP Gating clock and set FIMD source to 267 Mhz for DP */ +void clock_init_dp_clock(void); + +#endif diff --git a/src/cpu/samsung/exynos5250/dsim.h b/src/cpu/samsung/exynos5250/dsim.h index 38a4c98..b9245d3 100644 --- a/src/cpu/samsung/exynos5250/dsim.h +++ b/src/cpu/samsung/exynos5250/dsim.h @@ -1,11 +1,11 @@ /* - * (C) Copyright 2012 Samsung Electronics - * Register map for Exynos5 MIPI-DSIM + * This file is part of the coreboot project. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * Copyright (C) 2012 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -14,12 +14,13 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#ifndef __EXYNOS5_DSIM_H__ -#define __EXYNOS5_DSIM_H__ +/* Register map for Exynos5 MIPI-DSIM */ + +#ifndef CPU_SAMSUNG_EXYNOS5250_DSIM_H +#define CPU_SAMSUNG_EXYNOS5250_DSIM_H
/* DSIM register map */ struct exynos5_dsim { diff --git a/src/cpu/samsung/exynos5250/exynos-cpufreq.h b/src/cpu/samsung/exynos5250/exynos-cpufreq.h deleted file mode 100644 index 1c28e77..0000000 --- a/src/cpu/samsung/exynos5250/exynos-cpufreq.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - CPU frequency scaling support - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* Define various levels of ARM frequency */ -enum cpufreq_level { - CPU_FREQ_L200, /* 200 MHz */ - CPU_FREQ_L300, /* 300 MHz */ - CPU_FREQ_L400, /* 400 MHz */ - CPU_FREQ_L500, /* 500 MHz */ - CPU_FREQ_L600, /* 600 MHz */ - CPU_FREQ_L700, /* 700 MHz */ - CPU_FREQ_L800, /* 800 MHz */ - CPU_FREQ_L900, /* 900 MHz */ - CPU_FREQ_L1000, /* 1000 MHz */ - CPU_FREQ_L1100, /* 1100 MHz */ - CPU_FREQ_L1200, /* 1200 MHz */ - CPU_FREQ_L1300, /* 1300 MHz */ - CPU_FREQ_L1400, /* 1400 MHz */ - CPU_FREQ_L1500, /* 1500 MHz */ - CPU_FREQ_L1600, /* 1600 MHz */ - CPU_FREQ_L1700, /* 1700 MHz */ - CPU_FREQ_LCOUNT, -}; - -/* - * Initialize ARM frequency scaling - * - * @param blob FDT blob - * @return int value, 0 for success - */ -int exynos5250_cpufreq_init(const void *blob); - -/* - * Switch ARM frequency to new level - * - * @param new_freq_level enum cpufreq_level, states new frequency - * @return int value, 0 for success - */ -int exynos5250_set_frequency(enum cpufreq_level new_freq_level); diff --git a/src/cpu/samsung/exynos5250/exynos-fb.c b/src/cpu/samsung/exynos5250/exynos-fb.c deleted file mode 100644 index 5b67120..0000000 --- a/src/cpu/samsung/exynos5250/exynos-fb.c +++ /dev/null @@ -1,606 +0,0 @@ -/* - * LCD driver for Exynos - * - * Copyright 2013 Google Inc. - * Copyright (C) 2012 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <arch/io.h> -#include <stdlib.h> -#include <string.h> -#include <timer.h> -#include <console/console.h> -#include <cpu/samsung/exynos5250/cpu.h> -#include <cpu/samsung/exynos5250/power.h> -#include <cpu/samsung/exynos5250/sysreg.h> -#include <drivers/maxim/max77686/max77686.h> - -#include "device/i2c.h" -#include "cpu/samsung/exynos5250/i2c.h" -#include "cpu/samsung/exynos5250/dsim.h" -#include "cpu/samsung/exynos5250/fimd.h" - -#include "cpu/samsung/exynos5250/s5p-dp.h" -#include "s5p-dp-core.h" - -/* - * Here is the rough outline of how we bring up the display: - * 1. Upon power-on Sink generates a hot plug detection pulse thru HPD - * 2. Source determines video mode by reading DPCD receiver capability field - * (DPCD 00000h to 0000Dh) including eDP CP capability register (DPCD - * 0000Dh). - * 3. Sink replies DPCD receiver capability field. - * 4. Source starts EDID read thru I2C-over-AUX. - * 5. Sink replies EDID thru I2C-over-AUX. - * 6. Source determines link configuration, such as MAX_LINK_RATE and - * MAX_LANE_COUNT. Source also determines which type of eDP Authentication - * method to use and writes DPCD link configuration field (DPCD 00100h to - * 0010Ah) including eDP configuration set (DPCD 0010Ah). - * 7. Source starts link training. Sink does clock recovery and equalization. - * 8. Source reads DPCD link status field (DPCD 00200h to 0020Bh). - * 9. Sink replies DPCD link status field. If main link is not stable, Source - * repeats Step 7. - * 10. Source sends MSA (Main Stream Attribute) data. Sink extracts video - * parameters and recovers stream clock. - * 11. Source sends video data. - */ - -/* To help debug any init errors here, define a list of possible errors */ -enum { - ERR_PLL_NOT_UNLOCKED = 2, - ERR_VIDEO_CLOCK_BAD, - ERR_VIDEO_STREAM_BAD, - ERR_DPCD_READ_ERROR1, /* 5 */ - - ERR_DPCD_WRITE_ERROR1, - ERR_DPCD_READ_ERROR2, - ERR_DPCD_WRITE_ERROR2, - ERR_INVALID_LANE, - ERR_PLL_NOT_LOCKED, /* 10 */ - - ERR_PRE_EMPHASIS_LEVELS, - ERR_LINK_RATE_ABNORMAL, - ERR_MAX_LANE_COUNT_ABNORMAL, - ERR_LINK_TRAINING_FAILURE, - ERR_MISSING_DP_BASE, /* 15 */ - - ERR_NO_FDT_NODE, -}; -/* ok, this is stupid, but we're going to leave the variables in here until we - * know it works. One cleanup task at a time. - */ -enum stage_t { - STAGE_START = 0, - STAGE_LCD_VDD, - STAGE_BRIDGE_SETUP, - STAGE_BRIDGE_INIT, - STAGE_BRIDGE_RESET, - STAGE_HOTPLUG, - STAGE_DP_CONTROLLER, - STAGE_BACKLIGHT_VDD, - STAGE_BACKLIGHT_PWM, - STAGE_BACKLIGHT_EN, - STAGE_DONE, -}; - -int lcd_line_length; -int lcd_color_fg; -int lcd_color_bg; - -void *lcd_console_address; /* Start of console buffer */ - -short console_col; -short console_row; - - -#ifdef CONFIG_EXYNOS_DISPLAYPORT -static struct s5p_dp_device dp_device; - -#endif - -/* Bypass FIMD of DISP1_BLK */ -static void fimd_bypass(void) -{ - struct exynos5_sysreg *sysreg = samsung_get_base_sysreg(); - - setbits_le32(&sysreg->disp1blk_cfg, FIMDBYPASS_DISP1); - sysreg->disp1blk_cfg &= ~FIMDBYPASS_DISP1; -} - -/* Calculate the size of Framebuffer from the resolution */ -static u32 calc_fbsize(vidinfo_t *panel_info) -{ - /* They had PAGE_SIZE here instead of 4096. - * but that's a totally arbitrary number -- everything nowadays - * has lots of page sizes. - * So keep it obvious. - */ - return ALIGN((panel_info->vl_col * panel_info->vl_row * - ((1<<panel_info->vl_bpix) / 8)), 4096); -} - -/* - * Initialize display controller. - * - * @param lcdbase pointer to the base address of framebuffer. - * @pd pointer to the main panel_data structure - */ -void fb_init(vidinfo_t *panel_info, void *lcdbase, - struct exynos5_fimd_panel *pd) -{ - unsigned int val; - u32 fbsize; - struct exynos5_fimd *fimd = samsung_get_base_fimd(); - struct exynos5_disp_ctrl *disp_ctrl = samsung_get_base_disp_ctrl(); - - writel(pd->ivclk | pd->fixvclk, &disp_ctrl->vidcon1); - val = ENVID_ON | ENVID_F_ON | (pd->clkval_f << CLKVAL_F_OFFSET); - writel(val, &fimd->vidcon0); - - val = (pd->vsync << VSYNC_PULSE_WIDTH_OFFSET) | - (pd->lower_margin << V_FRONT_PORCH_OFFSET) | - (pd->upper_margin << V_BACK_PORCH_OFFSET); - writel(val, &disp_ctrl->vidtcon0); - - val = (pd->hsync << HSYNC_PULSE_WIDTH_OFFSET) | - (pd->right_margin << H_FRONT_PORCH_OFFSET) | - (pd->left_margin << H_BACK_PORCH_OFFSET); - writel(val, &disp_ctrl->vidtcon1); - - val = ((pd->xres - 1) << HOZVAL_OFFSET) | - ((pd->yres - 1) << LINEVAL_OFFSET); - writel(val, &disp_ctrl->vidtcon2); - - writel((unsigned int)lcdbase, &fimd->vidw00add0b0); - - fbsize = calc_fbsize(panel_info); - writel((unsigned int)lcdbase + fbsize, &fimd->vidw00add1b0); - - writel(pd->xres * 2, &fimd->vidw00add2); - - val = ((pd->xres - 1) << OSD_RIGHTBOTX_F_OFFSET); - val |= ((pd->yres - 1) << OSD_RIGHTBOTY_F_OFFSET); - writel(val, &fimd->vidosd0b); - writel(pd->xres * pd->yres, &fimd->vidosd0c); - - setbits_le32(&fimd->shadowcon, CHANNEL0_EN); - - val = BPPMODE_F_RGB_16BIT_565 << BPPMODE_F_OFFSET; - val |= ENWIN_F_ENABLE | HALF_WORD_SWAP_EN; - writel(val, &fimd->wincon0); - - /* DPCLKCON_ENABLE */ - writel(1 << 1, &fimd->dpclkcon); -} - -void exynos_fimd_disable(void); -void exynos_fimd_disable(void) -{ - struct exynos5_fimd *fimd = samsung_get_base_fimd(); - - writel(0, &fimd->wincon0); - clrbits_le32(&fimd->shadowcon, CHANNEL0_EN); -} - -/* - * Configure DP in slave mode and wait for video stream. - * - * param dp pointer to main s5p-dp structure - * param video_info pointer to main video_info structure. - * return status - */ -static int s5p_dp_config_video(struct s5p_dp_device *dp, - struct video_info *video_info) -{ - int timeout = 0; - struct exynos5_dp *base = dp->base; - struct mono_time start, current, end; - s5p_dp_config_video_slave_mode(dp, video_info); - - s5p_dp_set_video_color_format(dp, video_info->color_depth, - video_info->color_space, - video_info->dynamic_range, - video_info->ycbcr_coeff); - - if (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { - printk(BIOS_DEBUG, "PLL is not locked yet.\n"); - return -ERR_PLL_NOT_UNLOCKED; - } - - timer_monotonic_get(&start); - end = current = start; - mono_time_add_usecs(&end, STREAM_ON_TIMEOUT * USECS_PER_MSEC); - do { - if (s5p_dp_is_slave_video_stream_clock_on(dp) == 0) { - timeout++; - break; - } - timer_monotonic_get(¤t); - } while (mono_time_before(¤t, &end)); - - if (!timeout) { - printk(BIOS_ERR, "Video Clock Not ok after %ldus.\n", - mono_time_diff_microseconds(&start, &end)); - return -ERR_VIDEO_CLOCK_BAD; - } - - /* Set to use the register calculated M/N video */ - s5p_dp_set_video_cr_mn(dp, CALCULATED_M, 0, 0); - - clrbits_le32(&base->video_ctl_10, FORMAT_SEL); - - /* Disable video mute */ - clrbits_le32(&base->video_ctl_1, HDCP_VIDEO_MUTE); - - /* Configure video slave mode */ - s5p_dp_enable_video_master(dp); - - /* Enable video */ - setbits_le32(&base->video_ctl_1, VIDEO_EN); - timeout = s5p_dp_is_video_stream_on(dp); - - if (timeout) { - printk(BIOS_DEBUG, "Video Stream Not on\n"); - return -ERR_VIDEO_STREAM_BAD; - } - - return 0; -} - -/* - * Set DP to enhanced mode. We use this for EVT1 - * param dp pointer to main s5p-dp structure - * return status - */ -static int s5p_dp_enable_rx_to_enhanced_mode(struct s5p_dp_device *dp) -{ - u8 data; - - if (s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET, &data)) { - printk(BIOS_DEBUG, "DPCD read error\n"); - return -ERR_DPCD_READ_ERROR1; - } - if (s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET, - DPCD_ENHANCED_FRAME_EN | - (data & DPCD_LANE_COUNT_SET_MASK))) { - printk(BIOS_DEBUG, "DPCD write error\n"); - return -ERR_DPCD_WRITE_ERROR1; - } - - return 0; -} - -/* - * Enable scrambles mode. We use this for EVT1 - * param dp pointer to main s5p-dp structure - * return status - */ -static int s5p_dp_enable_scramble(struct s5p_dp_device *dp) -{ - u8 data; - struct exynos5_dp *base = dp->base; - - clrbits_le32(&base->dp_training_ptn_set, SCRAMBLING_DISABLE); - - if (s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_TRAINING_PATTERN_SET, - &data)) { - printk(BIOS_DEBUG, "DPCD read error\n"); - return -ERR_DPCD_READ_ERROR2; - } - - if (s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_TRAINING_PATTERN_SET, - (u8)(data & ~DPCD_SCRAMBLING_DISABLED))) { - printk(BIOS_DEBUG, "DPCD write error\n"); - return -ERR_DPCD_WRITE_ERROR2; - } - - return 0; -} - -/* - * Reset DP and prepare DP for init training - * param dp pointer to main s5p-dp structure - */ -static int s5p_dp_init_dp(struct s5p_dp_device *dp) -{ - int ret, i; - struct exynos5_dp *base = dp->base; - - for (i = 0; i < DP_INIT_TRIES; i++) { - s5p_dp_reset(dp); - - /* SW defined function Normal operation */ - clrbits_le32(&base->func_en_1, SW_FUNC_EN_N); - - ret = s5p_dp_init_analog_func(dp); - if (!ret) - break; - - udelay(5000); - printk(BIOS_DEBUG, "LCD retry init, attempt=%d ret=%d\n", i, ret); - } - if (i == DP_INIT_TRIES) { - printk(BIOS_DEBUG, "LCD initialization failed, ret=%d\n", ret); - return ret; - } - - s5p_dp_init_aux(dp); - - return ret; -} - -/* - * Set pre-emphasis level - * param dp pointer to main s5p-dp structure - * param pre_emphasis pre-emphasis level - * param lane lane number(0 - 3) - * return status - */ -static int s5p_dp_set_lane_lane_pre_emphasis(struct s5p_dp_device *dp, - int pre_emphasis, int lane) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - reg = pre_emphasis << PRE_EMPHASIS_SET_SHIFT; - switch (lane) { - case 0: - writel(reg, &base->ln0_link_trn_ctl); - break; - case 1: - writel(reg, &base->ln1_link_trn_ctl); - break; - - case 2: - writel(reg, &base->ln2_link_trn_ctl); - break; - - case 3: - writel(reg, &base->ln3_link_trn_ctl); - break; - default: - printk(BIOS_DEBUG, "%s: Invalid lane %d\n", __func__, lane); - return -ERR_INVALID_LANE; - } - return 0; -} - -/* - * Read supported bandwidth type - * param dp pointer to main s5p-dp structure - * param bandwidth pointer to variable holding bandwidth type - */ -static void s5p_dp_get_max_rx_bandwidth(struct s5p_dp_device *dp, - u8 *bandwidth) -{ - u8 data; - - /* - * For DP rev.1.1, Maximum link rate of Main Link lanes - * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps - */ - s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LINK_RATE, &data); - *bandwidth = data; -} - -/* - * Reset DP and prepare DP for init training - * param dp pointer to main s5p-dp structure - * param lane_count pointer to variable holding no of lanes - */ -static void s5p_dp_get_max_rx_lane_count(struct s5p_dp_device *dp, - u8 *lane_count) -{ - u8 data; - - /* - * For DP rev.1.1, Maximum number of Main Link lanes - * 0x01 = 1 lane, 0x02 = 2 lanes, 0x04 = 4 lanes - */ - s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LANE_COUNT, &data); - *lane_count = data & DPCD_MAX_LANE_COUNT_MASK; -} - -/* - * DP H/w Link Training. Set DPCD link rate and bandwidth. - * param dp pointer to main s5p-dp structure - * param max_lane No of lanes - * param max_rate bandwidth - * return status - */ -static int s5p_dp_hw_link_training(struct s5p_dp_device *dp, - unsigned int max_lane, - unsigned int max_rate) -{ - int pll_is_locked = 0; - u32 data; - u32 start; - int lane; - struct exynos5_dp *base = dp->base; - - /* Stop Video */ - clrbits_le32(&base->video_ctl_1, VIDEO_EN); - - start = get_timer(0); - while ((pll_is_locked = s5p_dp_get_pll_lock_status(dp)) == PLL_UNLOCKED) { - if (get_timer(start) > PLL_LOCK_TIMEOUT) { - /* Ignore this error, and try to continue */ - printk(BIOS_ERR, "PLL is not locked yet.\n"); - break; - } - } - printk(BIOS_SPEW, "PLL is %slocked\n", - pll_is_locked == PLL_LOCKED ? "": "not "); - /* Reset Macro */ - setbits_le32(&base->dp_phy_test, MACRO_RST); - - /* 10 us is the minimum reset time. */ - udelay(10); - - clrbits_le32(&base->dp_phy_test, MACRO_RST); - - /* Set TX pre-emphasis to minimum */ - for (lane = 0; lane < max_lane; lane++) - if (s5p_dp_set_lane_lane_pre_emphasis(dp, - PRE_EMPHASIS_LEVEL_0, lane)) { - printk(BIOS_DEBUG, "Unable to set pre emphasis level\n"); - return -ERR_PRE_EMPHASIS_LEVELS; - } - - /* All DP analog module power up */ - writel(0x00, &base->dp_phy_pd); - - /* Initialize by reading RX's DPCD */ - s5p_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate); - s5p_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count); - - printk(BIOS_SPEW, "%s: rate 0x%x, lane_count %d\n", __func__, - dp->link_train.link_rate, dp->link_train.lane_count); - - if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) && - (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) { - printk(BIOS_DEBUG, "Rx Max Link Rate is abnormal :%x !\n", - dp->link_train.link_rate); - /* Not Retrying */ - return -ERR_LINK_RATE_ABNORMAL; - } - - if (dp->link_train.lane_count == 0) { - printk(BIOS_DEBUG, "Rx Max Lane count is abnormal :%x !\n", - dp->link_train.lane_count); - /* Not retrying */ - return -ERR_MAX_LANE_COUNT_ABNORMAL; - } - - /* Setup TX lane count & rate */ - if (dp->link_train.lane_count > max_lane) - dp->link_train.lane_count = max_lane; - if (dp->link_train.link_rate > max_rate) - dp->link_train.link_rate = max_rate; - - /* Set link rate and count as you want to establish*/ - writel(dp->link_train.lane_count, &base->lane_count_set); - writel(dp->link_train.link_rate, &base->link_bw_set); - - /* Set sink to D0 (Sink Not Ready) mode. */ - s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_SINK_POWER_STATE, - DPCD_SET_POWER_STATE_D0); - - /* Start HW link training */ - writel(HW_TRAINING_EN, &base->dp_hw_link_training); - - /* Wait until HW link training done */ - s5p_dp_wait_hw_link_training_done(dp); - - /* Get hardware link training status */ - data = readl(&base->dp_hw_link_training); - printk(BIOS_SPEW, "hardware link training status: 0x%08x\n", data); - if (data != 0) { - printk(BIOS_ERR, " H/W link training failure: 0x%x\n", data); - return -ERR_LINK_TRAINING_FAILURE; - } - - /* Get Link Bandwidth */ - data = readl(&base->link_bw_set); - - dp->link_train.link_rate = data; - - data = readl(&base->lane_count_set); - dp->link_train.lane_count = data; - printk(BIOS_SPEW, "Done training: Link bandwidth: 0x%x, lane_count: %d\n", - dp->link_train.link_rate, data); - - return 0; -} - -/* - * Initialize DP display - */ -int dp_controller_init(struct s5p_dp_device *dp_device) -{ - int ret; - struct s5p_dp_device *dp = dp_device; - struct exynos5_dp *base; - - clock_init_dp_clock(); - - power_enable_dp_phy(); - ret = s5p_dp_init_dp(dp); - if (ret) { - printk(BIOS_ERR, "%s: Could not initialize dp\n", __func__); - return ret; - } - - ret = s5p_dp_hw_link_training(dp, dp->video_info->lane_count, - dp->video_info->link_rate); - if (ret) { - printk(BIOS_ERR, "unable to do link train\n"); - return ret; - } - /* Minimum delay after H/w Link training */ - udelay(1000); - - ret = s5p_dp_enable_scramble(dp); - if (ret) { - printk(BIOS_ERR, "unable to set scramble mode\n"); - return ret; - } - - ret = s5p_dp_enable_rx_to_enhanced_mode(dp); - if (ret) { - printk(BIOS_ERR, "unable to set enhanced mode\n"); - return ret; - } - - - base = dp->base; - /* Enable enhanced mode */ - setbits_le32(&base->sys_ctl_4, ENHANCED); - - writel(dp->link_train.lane_count, &base->lane_count_set); - writel(dp->link_train.link_rate, &base->link_bw_set); - - s5p_dp_init_video(dp); - ret = s5p_dp_config_video(dp, dp->video_info); - if (ret) { - printk(BIOS_ERR, "unable to config video\n"); - return ret; - } - - return 0; -} - -/** - * Init the LCD controller - * - * @param lcdbase Base address of LCD frame buffer - * @return 0 if ok, -ve error code on error - */ -int lcd_ctrl_init(vidinfo_t *panel_info, - struct exynos5_fimd_panel *panel_data, void *lcdbase) -{ - int ret = 0; - - fimd_bypass(); - fb_init(panel_info, lcdbase, panel_data); - return ret; -} diff --git a/src/cpu/samsung/exynos5250/exynos-tmu.c b/src/cpu/samsung/exynos5250/exynos-tmu.c deleted file mode 100644 index 2bd959c..0000000 --- a/src/cpu/samsung/exynos5250/exynos-tmu.c +++ /dev/null @@ -1,195 +0,0 @@ -/* - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * Akshay Saraswat Akshay.s@samsung.com - * Copyright (c) 2013 Google Inc. - * - * EXYNOS - Thermal Management Unit - * - * This file was originally imported from Das U-Boot and then re-factored - * for coreboot. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <arch/io.h> -#include <cpu/samsung/exynos5250/power.h> -#include <cpu/samsung/exynos5250/exynos-tmu.h> - -#include <console/console.h> - -#define TRIMINFO_RELOAD 1 -#define CORE_EN 1 -#define THERM_TRIP_EN (1 << 12) - -#define INTEN_RISE0 1 -#define INTEN_RISE1 (1 << 4) -#define INTEN_RISE2 (1 << 8) -#define INTEN_FALL0 (1 << 16) -#define INTEN_FALL1 (1 << 20) -#define INTEN_FALL2 (1 << 24) - -#define TRIM_INFO_MASK 0xff - -#define INTCLEAR_RISE0 1 -#define INTCLEAR_RISE1 (1 << 4) -#define INTCLEAR_RISE2 (1 << 8) -#define INTCLEAR_FALL0 (1 << 16) -#define INTCLEAR_FALL1 (1 << 20) -#define INTCLEAR_FALL2 (1 << 24) -#define INTCLEARALL (INTCLEAR_RISE0 | INTCLEAR_RISE1 | \ - INTCLEAR_RISE2 | INTCLEAR_FALL0 | \ - INTCLEAR_FALL1 | INTCLEAR_FALL2) - -/* - * After reading temperature code from register, compensating - * its value and calculating celsius temperatue, - * get current temperatue. - * - * @return current temperature of the chip as sensed by TMU - */ -static int get_cur_temp(struct tmu_info *info) -{ - int cur_temp; - struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base; - - /* Temperature code range between min 25 and max 125 */ - cur_temp = readl(®->current_temp) & 0xff; - - /* Calibrate current temperature */ - if (cur_temp) - cur_temp = cur_temp - info->te1 + info->dc_value; - - return cur_temp; -} - -/* - * Monitors status of the TMU device and exynos temperature - * - * @info TMU info - * @temp pointer to the current temperature value - * @return enum tmu_status_t value, code indicating event to execute - */ -enum tmu_status_t tmu_monitor(struct tmu_info *info, int *temp) -{ - if (info->tmu_state == TMU_STATUS_INIT) - return -1; - - int cur_temp; - struct tmu_data *data = &info->data; - - /* Read current temperature of the SOC */ - cur_temp = get_cur_temp(info); - *temp = cur_temp; - - /* Temperature code lies between min 25 and max 125 */ - if (cur_temp >= data->ts.start_tripping && - cur_temp <= data->ts.max_val) - return TMU_STATUS_TRIPPED; - else if (cur_temp >= data->ts.start_warning) - return TMU_STATUS_WARNING; - else if (cur_temp < data->ts.start_warning && - cur_temp >= data->ts.min_val) - return TMU_STATUS_NORMAL; - /* Temperature code does not lie between min 25 and max 125 */ - else { - info->tmu_state = TMU_STATUS_INIT; - printk(BIOS_DEBUG, "EXYNOS_TMU: Thermal reading failed\n"); - return -1; - } - return 0; -} - -/* - * Calibrate and calculate threshold values and - * enable interrupt levels - * - * @param info pointer to the tmu_info struct - */ -static void tmu_setup_parameters(struct tmu_info *info) -{ - unsigned int te_temp, con; - unsigned int warning_code, trip_code, hwtrip_code; - unsigned int cooling_temp; - unsigned int rising_value; - struct tmu_data *data = &info->data; - struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base; - - /* Must reload for using efuse value at EXYNOS */ - writel(TRIMINFO_RELOAD, ®->triminfo_control); - - /* Get the compensation parameter */ - te_temp = readl(®->triminfo); - info->te1 = te_temp & TRIM_INFO_MASK; - info->te2 = ((te_temp >> 8) & TRIM_INFO_MASK); - - if ((data->efuse_min_value > info->te1) || - (info->te1 > data->efuse_max_value) - || (info->te2 != 0)) - info->te1 = data->efuse_value; - - /* Get RISING & FALLING Threshold value */ - warning_code = data->ts.start_warning - + info->te1 - info->dc_value; - trip_code = data->ts.start_tripping - + info->te1 - info->dc_value; - hwtrip_code = data->ts.hardware_tripping - + info->te1 - info->dc_value; - - cooling_temp = 0; - - rising_value = ((warning_code << 8) | - (trip_code << 16) | - (hwtrip_code << 24)); - - /* Set interrupt level */ - writel(rising_value, ®->threshold_temp_rise); - writel(cooling_temp, ®->threshold_temp_fall); - - /* - * Need to init all register settings after getting parameter info - * [28:23] vref [11:8] slope - Tuning parameter - * - * WARNING: this slope value writes into many bits in the tmu_control - * register, with the default FDT value of 268470274 (0x10008802) - * we are using this essentially sets the default register setting - * from the TRM for tmu_control. - * TODO(bhthompson): rewrite this code such that we are not performing - * a hard wipe of tmu_control and re verify functionality. - */ - writel(data->slope, ®->tmu_control); - - writel(INTCLEARALL, ®->intclear); - /* TMU core enable */ - con = readl(®->tmu_control); - con |= (info->tmu_mux << 20) | THERM_TRIP_EN | CORE_EN; - - writel(con, ®->tmu_control); - - /* Enable HW thermal trip */ - power_enable_hw_thermal_trip(); - - /* LEV1 LEV2 interrupt enable */ - writel(INTEN_RISE1 | INTEN_RISE2, ®->inten); -} - -/* - * Initialize TMU device - * - * @return int value, 0 for success - */ -int tmu_init(struct tmu_info *info) -{ - info->tmu_state = TMU_STATUS_INIT; - - tmu_setup_parameters(info); - info->tmu_state = TMU_STATUS_NORMAL; - - return 0; -} diff --git a/src/cpu/samsung/exynos5250/exynos-tmu.h b/src/cpu/samsung/exynos5250/exynos-tmu.h deleted file mode 100644 index 40eda56..0000000 --- a/src/cpu/samsung/exynos5250/exynos-tmu.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * Akshay Saraswat Akshay.s@samsung.com - * - * EXYNOS - Thermal Management Unit - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __EXYNOS_TMU_H -#define __EXYNOS_TMU_H - -struct tmu_reg { - unsigned triminfo; - unsigned rsvd1; - unsigned rsvd2; - unsigned rsvd3; - unsigned rsvd4; - unsigned triminfo_control; - unsigned rsvd5; - unsigned rsvd6; - unsigned tmu_control; - unsigned rsvd7; - unsigned tmu_status; - unsigned sampling_internal; - unsigned counter_value0; - unsigned counter_value1; - unsigned rsvd8; - unsigned rsvd9; - unsigned current_temp; - unsigned rsvd10; - unsigned rsvd11; - unsigned rsvd12; - unsigned threshold_temp_rise; - unsigned threshold_temp_fall; - unsigned rsvd13; - unsigned rsvd14; - unsigned past_temp3_0; - unsigned past_temp7_4; - unsigned past_temp11_8; - unsigned past_temp15_12; - unsigned inten; - unsigned intstat; - unsigned intclear; - unsigned rsvd15; - unsigned emul_con; -}; - -enum tmu_status_t { - TMU_STATUS_INIT = 0, - TMU_STATUS_NORMAL, - TMU_STATUS_WARNING, - TMU_STATUS_TRIPPED, -}; - -/* Tmeperature threshold values for various thermal events */ -struct temperature_params { - /* minimum value in temperature code range */ - unsigned int min_val; - /* maximum value in temperature code range */ - unsigned int max_val; - /* temperature threshold to start warning */ - unsigned int start_warning; - /* temperature threshold CPU tripping */ - unsigned int start_tripping; - /* temperature threshold for HW tripping */ - unsigned int hardware_tripping; -}; - -/* Pre-defined values and thresholds for calibration of current temperature */ -struct tmu_data { - /* pre-defined temperature thresholds */ - struct temperature_params ts; - /* pre-defined efuse range minimum value */ - unsigned int efuse_min_value; - /* pre-defined efuse value for temperature calibration */ - unsigned int efuse_value; - /* pre-defined efuse range maximum value */ - unsigned int efuse_max_value; - /* current temperature sensing slope */ - unsigned int slope; -}; - -/* TMU device specific details and status */ -struct tmu_info { - /* base Address for the TMU */ - unsigned tmu_base; - /* mux Address for the TMU */ - int tmu_mux; - /* pre-defined values for calibration and thresholds */ - struct tmu_data data; - /* value required for triminfo_25 calibration */ - unsigned int te1; - /* value required for triminfo_85 calibration */ - unsigned int te2; - /* TMU DC value for threshold calculation */ - int dc_value; - /* enum value indicating status of the TMU */ - int tmu_state; -}; - -extern struct tmu_info *tmu_info; - -/* - * Monitors status of the TMU device and exynos temperature - * - * @info pointer to TMU info struct - * @temp pointer to the current temperature value - * @return enum tmu_status_t value, code indicating event to execute - * and -1 on error - */ -enum tmu_status_t tmu_monitor(struct tmu_info *info, int *temp); - -/* - * Initialize TMU device - * - * @info pointer to TMU info struct - * @return int value, 0 for success - */ -int tmu_init(struct tmu_info *info); - -#endif /* EXYNOS_TMU_H */ diff --git a/src/cpu/samsung/exynos5250/exynos5-common.h b/src/cpu/samsung/exynos5250/exynos5-common.h deleted file mode 100644 index b2957bf..0000000 --- a/src/cpu/samsung/exynos5250/exynos5-common.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Copyright (C) 2012 Samsung Electronics - * - * Common configuration settings for EXYNOS5 based boards. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __EXYNOS5_CONFIG_H -#define __EXYNOS5_CONFIG_H - -#include <cpu/samsung/exynos5250/cpu.h> /* get chip and board defs */ - -/* TODO(dhendrix): some #defines are commented out here and moved to Kconfig */ - -//#define CONFIG_SYS_SDRAM_BASE 0x40000000 -//#define CONFIG_SYS_TEXT_BASE 0x43e00000 - -/* Power Down Modes */ -#define S5P_CHECK_SLEEP 0x00000BAD -#define S5P_CHECK_DIDLE 0xBAD00000 -#define S5P_CHECK_LPA 0xABAD0000 - -#define CONFIG_SYS_HZ 1000 - -/* We spend about 100us getting from reset to SPL */ -#define CONFIG_SPL_TIME_US 100000 - -#endif /* __EXYNOS5_CONFIG_H */ diff --git a/src/cpu/samsung/exynos5250/exynos5250-tmu.c b/src/cpu/samsung/exynos5250/exynos5250-tmu.c deleted file mode 100644 index 248968b..0000000 --- a/src/cpu/samsung/exynos5250/exynos5250-tmu.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Copyright (C) 2013 Google Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * This file contains Exynos5250-specific TMU information. - */ - -#include <cpu/samsung/exynos5250/exynos-tmu.h> -#include <cpu/samsung/exynos5250/cpu.h> - -struct tmu_info exynos5250_tmu_info = { - .tmu_base = 0x10060000, - .tmu_mux = 6, - .data = { - .ts = { - .min_val = 25, - .max_val = 125, - .start_warning = 95, - .start_tripping = 105, - .hardware_tripping = 110, - }, - .efuse_min_value = 40, - .efuse_value = 55, - .efuse_max_value = 100, - .slope = 0x10008802, - }, - .dc_value = 25, -}; diff --git a/src/cpu/samsung/exynos5250/fb.c b/src/cpu/samsung/exynos5250/fb.c new file mode 100644 index 0000000..d4c3d44 --- /dev/null +++ b/src/cpu/samsung/exynos5250/fb.c @@ -0,0 +1,597 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2013 Google Inc. + * Copyright (C) 2012 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* LCD driver for Exynos */ + +#include <arch/io.h> +#include <stdlib.h> +#include <string.h> +#include <timer.h> +#include <delay.h> +#include <console/console.h> +#include "timer.h" +#include "cpu.h" +#include "power.h" +#include "sysreg.h" +#include <drivers/maxim/max77686/max77686.h> + +#include "device/i2c.h" +#include "i2c.h" +#include "fimd.h" +#include "dp.h" +#include "dp-core.h" + +/* + * Here is the rough outline of how we bring up the display: + * 1. Upon power-on Sink generates a hot plug detection pulse thru HPD + * 2. Source determines video mode by reading DPCD receiver capability field + * (DPCD 00000h to 0000Dh) including eDP CP capability register (DPCD + * 0000Dh). + * 3. Sink replies DPCD receiver capability field. + * 4. Source starts EDID read thru I2C-over-AUX. + * 5. Sink replies EDID thru I2C-over-AUX. + * 6. Source determines link configuration, such as MAX_LINK_RATE and + * MAX_LANE_COUNT. Source also determines which type of eDP Authentication + * method to use and writes DPCD link configuration field (DPCD 00100h to + * 0010Ah) including eDP configuration set (DPCD 0010Ah). + * 7. Source starts link training. Sink does clock recovery and equalization. + * 8. Source reads DPCD link status field (DPCD 00200h to 0020Bh). + * 9. Sink replies DPCD link status field. If main link is not stable, Source + * repeats Step 7. + * 10. Source sends MSA (Main Stream Attribute) data. Sink extracts video + * parameters and recovers stream clock. + * 11. Source sends video data. + */ + +/* To help debug any init errors here, define a list of possible errors */ +enum { + ERR_PLL_NOT_UNLOCKED = 2, + ERR_VIDEO_CLOCK_BAD, + ERR_VIDEO_STREAM_BAD, + ERR_DPCD_READ_ERROR1, /* 5 */ + + ERR_DPCD_WRITE_ERROR1, + ERR_DPCD_READ_ERROR2, + ERR_DPCD_WRITE_ERROR2, + ERR_INVALID_LANE, + ERR_PLL_NOT_LOCKED, /* 10 */ + + ERR_PRE_EMPHASIS_LEVELS, + ERR_LINK_RATE_ABNORMAL, + ERR_MAX_LANE_COUNT_ABNORMAL, + ERR_LINK_TRAINING_FAILURE, + ERR_MISSING_DP_BASE, /* 15 */ + + ERR_NO_FDT_NODE, +}; +/* ok, this is stupid, but we're going to leave the variables in here until we + * know it works. One cleanup task at a time. + */ +enum stage_t { + STAGE_START = 0, + STAGE_LCD_VDD, + STAGE_BRIDGE_SETUP, + STAGE_BRIDGE_INIT, + STAGE_BRIDGE_RESET, + STAGE_HOTPLUG, + STAGE_DP_CONTROLLER, + STAGE_BACKLIGHT_VDD, + STAGE_BACKLIGHT_PWM, + STAGE_BACKLIGHT_EN, + STAGE_DONE, +}; + +int lcd_line_length; +int lcd_color_fg; +int lcd_color_bg; + +void *lcd_console_address; /* Start of console buffer */ + +short console_col; +short console_row; + +/* Bypass FIMD of DISP1_BLK */ +static void fimd_bypass(void) +{ + struct exynos5_sysreg *sysreg = samsung_get_base_sysreg(); + + setbits_le32(&sysreg->disp1blk_cfg, FIMDBYPASS_DISP1); + sysreg->disp1blk_cfg &= ~FIMDBYPASS_DISP1; +} + +/* Calculate the size of Framebuffer from the resolution */ +static u32 calc_fbsize(vidinfo_t *panel_info) +{ + /* They had PAGE_SIZE here instead of 4096. + * but that's a totally arbitrary number -- everything nowadays + * has lots of page sizes. + * So keep it obvious. + */ + return ALIGN((panel_info->vl_col * panel_info->vl_row * + ((1<<panel_info->vl_bpix) / 8)), 4096); +} + +/* + * Initialize display controller. + * + * @param lcdbase pointer to the base address of framebuffer. + * @pd pointer to the main panel_data structure + */ +void fb_init(vidinfo_t *panel_info, void *lcdbase, + struct exynos5_fimd_panel *pd) +{ + unsigned int val; + u32 fbsize; + struct exynos5_fimd *fimd = samsung_get_base_fimd(); + struct exynos5_disp_ctrl *disp_ctrl = samsung_get_base_disp_ctrl(); + + writel(pd->ivclk | pd->fixvclk, &disp_ctrl->vidcon1); + val = ENVID_ON | ENVID_F_ON | (pd->clkval_f << CLKVAL_F_OFFSET); + writel(val, &fimd->vidcon0); + + val = (pd->vsync << VSYNC_PULSE_WIDTH_OFFSET) | + (pd->lower_margin << V_FRONT_PORCH_OFFSET) | + (pd->upper_margin << V_BACK_PORCH_OFFSET); + writel(val, &disp_ctrl->vidtcon0); + + val = (pd->hsync << HSYNC_PULSE_WIDTH_OFFSET) | + (pd->right_margin << H_FRONT_PORCH_OFFSET) | + (pd->left_margin << H_BACK_PORCH_OFFSET); + writel(val, &disp_ctrl->vidtcon1); + + val = ((pd->xres - 1) << HOZVAL_OFFSET) | + ((pd->yres - 1) << LINEVAL_OFFSET); + writel(val, &disp_ctrl->vidtcon2); + + writel((unsigned int)lcdbase, &fimd->vidw00add0b0); + + fbsize = calc_fbsize(panel_info); + writel((unsigned int)lcdbase + fbsize, &fimd->vidw00add1b0); + + writel(pd->xres * 2, &fimd->vidw00add2); + + val = ((pd->xres - 1) << OSD_RIGHTBOTX_F_OFFSET); + val |= ((pd->yres - 1) << OSD_RIGHTBOTY_F_OFFSET); + writel(val, &fimd->vidosd0b); + writel(pd->xres * pd->yres, &fimd->vidosd0c); + + setbits_le32(&fimd->shadowcon, CHANNEL0_EN); + + val = BPPMODE_F_RGB_16BIT_565 << BPPMODE_F_OFFSET; + val |= ENWIN_F_ENABLE | HALF_WORD_SWAP_EN; + writel(val, &fimd->wincon0); + + /* DPCLKCON_ENABLE */ + writel(1 << 1, &fimd->dpclkcon); +} + +#ifdef UNUSED_CODE +void exynos_fimd_disable(void) +{ + struct exynos5_fimd *fimd = samsung_get_base_fimd(); + + writel(0, &fimd->wincon0); + clrbits_le32(&fimd->shadowcon, CHANNEL0_EN); +} +#endif + +/* + * Configure DP in slave mode and wait for video stream. + * + * param dp pointer to main s5p-dp structure + * param video_info pointer to main video_info structure. + * return status + */ +static int s5p_dp_config_video(struct s5p_dp_device *dp, + struct video_info *video_info) +{ + int timeout = 0; + struct exynos5_dp *base = dp->base; + struct mono_time start, current, end; + s5p_dp_config_video_slave_mode(dp, video_info); + + s5p_dp_set_video_color_format(dp, video_info->color_depth, + video_info->color_space, + video_info->dynamic_range, + video_info->ycbcr_coeff); + + if (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { + printk(BIOS_DEBUG, "PLL is not locked yet.\n"); + return -ERR_PLL_NOT_UNLOCKED; + } + + timer_monotonic_get(&start); + end = current = start; + mono_time_add_usecs(&end, STREAM_ON_TIMEOUT * USECS_PER_MSEC); + do { + if (s5p_dp_is_slave_video_stream_clock_on(dp) == 0) { + timeout++; + break; + } + timer_monotonic_get(¤t); + } while (mono_time_before(¤t, &end)); + + if (!timeout) { + printk(BIOS_ERR, "Video Clock Not ok after %ldus.\n", + mono_time_diff_microseconds(&start, &end)); + return -ERR_VIDEO_CLOCK_BAD; + } + + /* Set to use the register calculated M/N video */ + s5p_dp_set_video_cr_mn(dp, CALCULATED_M, 0, 0); + + clrbits_le32(&base->video_ctl_10, FORMAT_SEL); + + /* Disable video mute */ + clrbits_le32(&base->video_ctl_1, HDCP_VIDEO_MUTE); + + /* Configure video slave mode */ + s5p_dp_enable_video_master(dp); + + /* Enable video */ + setbits_le32(&base->video_ctl_1, VIDEO_EN); + timeout = s5p_dp_is_video_stream_on(dp); + + if (timeout) { + printk(BIOS_DEBUG, "Video Stream Not on\n"); + return -ERR_VIDEO_STREAM_BAD; + } + + return 0; +} + +/* + * Set DP to enhanced mode. We use this for EVT1 + * param dp pointer to main s5p-dp structure + * return status + */ +static int s5p_dp_enable_rx_to_enhanced_mode(struct s5p_dp_device *dp) +{ + u8 data; + + if (s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET, &data)) { + printk(BIOS_DEBUG, "DPCD read error\n"); + return -ERR_DPCD_READ_ERROR1; + } + if (s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET, + DPCD_ENHANCED_FRAME_EN | + (data & DPCD_LANE_COUNT_SET_MASK))) { + printk(BIOS_DEBUG, "DPCD write error\n"); + return -ERR_DPCD_WRITE_ERROR1; + } + + return 0; +} + +/* + * Enable scrambles mode. We use this for EVT1 + * param dp pointer to main s5p-dp structure + * return status + */ +static int s5p_dp_enable_scramble(struct s5p_dp_device *dp) +{ + u8 data; + struct exynos5_dp *base = dp->base; + + clrbits_le32(&base->dp_training_ptn_set, SCRAMBLING_DISABLE); + + if (s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_TRAINING_PATTERN_SET, + &data)) { + printk(BIOS_DEBUG, "DPCD read error\n"); + return -ERR_DPCD_READ_ERROR2; + } + + if (s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_TRAINING_PATTERN_SET, + (u8)(data & ~DPCD_SCRAMBLING_DISABLED))) { + printk(BIOS_DEBUG, "DPCD write error\n"); + return -ERR_DPCD_WRITE_ERROR2; + } + + return 0; +} + +/* + * Reset DP and prepare DP for init training + * param dp pointer to main s5p-dp structure + */ +static int s5p_dp_init_dp(struct s5p_dp_device *dp) +{ + int ret, i; + struct exynos5_dp *base = dp->base; + + for (i = 0; i < DP_INIT_TRIES; i++) { + s5p_dp_reset(dp); + + /* SW defined function Normal operation */ + clrbits_le32(&base->func_en_1, SW_FUNC_EN_N); + + ret = s5p_dp_init_analog_func(dp); + if (!ret) + break; + + udelay(5000); + printk(BIOS_DEBUG, "LCD retry init, attempt=%d ret=%d\n", i, ret); + } + if (i == DP_INIT_TRIES) { + printk(BIOS_DEBUG, "LCD initialization failed, ret=%d\n", ret); + return ret; + } + + s5p_dp_init_aux(dp); + + return ret; +} + +/* + * Set pre-emphasis level + * param dp pointer to main s5p-dp structure + * param pre_emphasis pre-emphasis level + * param lane lane number(0 - 3) + * return status + */ +static int s5p_dp_set_lane_lane_pre_emphasis(struct s5p_dp_device *dp, + int pre_emphasis, int lane) +{ + u32 reg; + struct exynos5_dp *base = dp->base; + + reg = pre_emphasis << PRE_EMPHASIS_SET_SHIFT; + switch (lane) { + case 0: + writel(reg, &base->ln0_link_trn_ctl); + break; + case 1: + writel(reg, &base->ln1_link_trn_ctl); + break; + + case 2: + writel(reg, &base->ln2_link_trn_ctl); + break; + + case 3: + writel(reg, &base->ln3_link_trn_ctl); + break; + default: + printk(BIOS_DEBUG, "%s: Invalid lane %d\n", __func__, lane); + return -ERR_INVALID_LANE; + } + return 0; +} + +/* + * Read supported bandwidth type + * param dp pointer to main s5p-dp structure + * param bandwidth pointer to variable holding bandwidth type + */ +static void s5p_dp_get_max_rx_bandwidth(struct s5p_dp_device *dp, + u8 *bandwidth) +{ + u8 data; + + /* + * For DP rev.1.1, Maximum link rate of Main Link lanes + * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps + */ + s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LINK_RATE, &data); + *bandwidth = data; +} + +/* + * Reset DP and prepare DP for init training + * param dp pointer to main s5p-dp structure + * param lane_count pointer to variable holding no of lanes + */ +static void s5p_dp_get_max_rx_lane_count(struct s5p_dp_device *dp, + u8 *lane_count) +{ + u8 data; + + /* + * For DP rev.1.1, Maximum number of Main Link lanes + * 0x01 = 1 lane, 0x02 = 2 lanes, 0x04 = 4 lanes + */ + s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LANE_COUNT, &data); + *lane_count = data & DPCD_MAX_LANE_COUNT_MASK; +} + +/* + * DP H/w Link Training. Set DPCD link rate and bandwidth. + * param dp pointer to main s5p-dp structure + * param max_lane No of lanes + * param max_rate bandwidth + * return status + */ +static int s5p_dp_hw_link_training(struct s5p_dp_device *dp, + unsigned int max_lane, + unsigned int max_rate) +{ + int pll_is_locked = 0; + u32 data; + u32 start; + int lane; + struct exynos5_dp *base = dp->base; + + /* Stop Video */ + clrbits_le32(&base->video_ctl_1, VIDEO_EN); + + start = get_timer(0); + while ((pll_is_locked = s5p_dp_get_pll_lock_status(dp)) == PLL_UNLOCKED) { + if (get_timer(start) > PLL_LOCK_TIMEOUT) { + /* Ignore this error, and try to continue */ + printk(BIOS_ERR, "PLL is not locked yet.\n"); + break; + } + } + printk(BIOS_SPEW, "PLL is %slocked\n", + pll_is_locked == PLL_LOCKED ? "": "not "); + /* Reset Macro */ + setbits_le32(&base->dp_phy_test, MACRO_RST); + + /* 10 us is the minimum reset time. */ + udelay(10); + + clrbits_le32(&base->dp_phy_test, MACRO_RST); + + /* Set TX pre-emphasis to minimum */ + for (lane = 0; lane < max_lane; lane++) + if (s5p_dp_set_lane_lane_pre_emphasis(dp, + PRE_EMPHASIS_LEVEL_0, lane)) { + printk(BIOS_DEBUG, "Unable to set pre emphasis level\n"); + return -ERR_PRE_EMPHASIS_LEVELS; + } + + /* All DP analog module power up */ + writel(0x00, &base->dp_phy_pd); + + /* Initialize by reading RX's DPCD */ + s5p_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate); + s5p_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count); + + printk(BIOS_SPEW, "%s: rate 0x%x, lane_count %d\n", __func__, + dp->link_train.link_rate, dp->link_train.lane_count); + + if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) && + (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) { + printk(BIOS_DEBUG, "Rx Max Link Rate is abnormal :%x !\n", + dp->link_train.link_rate); + /* Not Retrying */ + return -ERR_LINK_RATE_ABNORMAL; + } + + if (dp->link_train.lane_count == 0) { + printk(BIOS_DEBUG, "Rx Max Lane count is abnormal :%x !\n", + dp->link_train.lane_count); + /* Not retrying */ + return -ERR_MAX_LANE_COUNT_ABNORMAL; + } + + /* Setup TX lane count & rate */ + if (dp->link_train.lane_count > max_lane) + dp->link_train.lane_count = max_lane; + if (dp->link_train.link_rate > max_rate) + dp->link_train.link_rate = max_rate; + + /* Set link rate and count as you want to establish*/ + writel(dp->link_train.lane_count, &base->lane_count_set); + writel(dp->link_train.link_rate, &base->link_bw_set); + + /* Set sink to D0 (Sink Not Ready) mode. */ + s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_SINK_POWER_STATE, + DPCD_SET_POWER_STATE_D0); + + /* Start HW link training */ + writel(HW_TRAINING_EN, &base->dp_hw_link_training); + + /* Wait until HW link training done */ + s5p_dp_wait_hw_link_training_done(dp); + + /* Get hardware link training status */ + data = readl(&base->dp_hw_link_training); + printk(BIOS_SPEW, "hardware link training status: 0x%08x\n", data); + if (data != 0) { + printk(BIOS_ERR, " H/W link training failure: 0x%x\n", data); + return -ERR_LINK_TRAINING_FAILURE; + } + + /* Get Link Bandwidth */ + data = readl(&base->link_bw_set); + + dp->link_train.link_rate = data; + + data = readl(&base->lane_count_set); + dp->link_train.lane_count = data; + printk(BIOS_SPEW, "Done training: Link bandwidth: 0x%x, lane_count: %d\n", + dp->link_train.link_rate, data); + + return 0; +} + +/* + * Initialize DP display + */ +int dp_controller_init(struct s5p_dp_device *dp_device) +{ + int ret; + struct s5p_dp_device *dp = dp_device; + struct exynos5_dp *base; + + clock_init_dp_clock(); + + power_enable_dp_phy(); + ret = s5p_dp_init_dp(dp); + if (ret) { + printk(BIOS_ERR, "%s: Could not initialize dp\n", __func__); + return ret; + } + + ret = s5p_dp_hw_link_training(dp, dp->video_info->lane_count, + dp->video_info->link_rate); + if (ret) { + printk(BIOS_ERR, "unable to do link train\n"); + return ret; + } + /* Minimum delay after H/w Link training */ + udelay(1000); + + ret = s5p_dp_enable_scramble(dp); + if (ret) { + printk(BIOS_ERR, "unable to set scramble mode\n"); + return ret; + } + + ret = s5p_dp_enable_rx_to_enhanced_mode(dp); + if (ret) { + printk(BIOS_ERR, "unable to set enhanced mode\n"); + return ret; + } + + + base = dp->base; + /* Enable enhanced mode */ + setbits_le32(&base->sys_ctl_4, ENHANCED); + + writel(dp->link_train.lane_count, &base->lane_count_set); + writel(dp->link_train.link_rate, &base->link_bw_set); + + s5p_dp_init_video(dp); + ret = s5p_dp_config_video(dp, dp->video_info); + if (ret) { + printk(BIOS_ERR, "unable to config video\n"); + return ret; + } + + return 0; +} + +/** + * Init the LCD controller + * + * @param lcdbase Base address of LCD frame buffer + * @return 0 if ok, -ve error code on error + */ +int lcd_ctrl_init(vidinfo_t *panel_info, + struct exynos5_fimd_panel *panel_data, void *lcdbase) +{ + int ret = 0; + + fimd_bypass(); + fb_init(panel_info, lcdbase, panel_data); + return ret; +} diff --git a/src/cpu/samsung/exynos5250/fet.h b/src/cpu/samsung/exynos5250/fet.h deleted file mode 100644 index e76bcbf..0000000 --- a/src/cpu/samsung/exynos5250/fet.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (c) 2012 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - */ - -#ifndef __ASM_ARM_ARCH_EXYNOS5_FET_H -#define __ASM_ARM_ARCH_EXYNOS5_FET_H - -/* The FET IDs for TPS65090 PMU chip. */ -enum { - FET_ID_BL = 1 - FET_ID_VIDEO, - FET_ID_WWAN, - FET_ID_SDCARD, - FET_ID_CAMOUT, - FET_ID_LCD, - FET_ID_TS -}; - -#endif diff --git a/src/cpu/samsung/exynos5250/fimd.h b/src/cpu/samsung/exynos5250/fimd.h index a46ad5a..71d1785 100644 --- a/src/cpu/samsung/exynos5250/fimd.h +++ b/src/cpu/samsung/exynos5250/fimd.h @@ -1,11 +1,11 @@ /* - * (C) Copyright 2012 Samsung Electronics - * Register map for Exynos5 FIMD + * This file is part of the coreboot project. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * Copyright (C) 2012 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -14,12 +14,13 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#ifndef __EXYNOS5_FIMD_H__ -#define __EXYNOS5_FIMD_H__ +/* Register map for Exynos5 FIMD */ + +#ifndef CPU_SAMSUNG_EXYNOS5250_FIMD_H +#define CPU_SAMSUNG_EXYNOS5250_FIMD_H
/* FIMD register map */ struct exynos5_fimd { diff --git a/src/cpu/samsung/exynos5250/gpio.c b/src/cpu/samsung/exynos5250/gpio.c index 853fa6f..223f6a1 100644 --- a/src/cpu/samsung/exynos5250/gpio.c +++ b/src/cpu/samsung/exynos5250/gpio.c @@ -1,11 +1,11 @@ /* - * (C) Copyright 2009 Samsung Electronics - * Minkyu Kang mk7.kang@samsung.com + * This file is part of the coreboot project. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * Copyright (C) 2009 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -14,18 +14,15 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-/* FIXME(dhendrix): fix this up so it doesn't require a bunch of #ifdefs... */ -#include <common.h> -#include <gpio.h> -//#include <arch/io.h> -#include <gpio.h> -#include <arch/gpio.h> #include <console/console.h> -#include <cpu/samsung/exynos5250/gpio.h> /* FIXME: for gpio_decode_number prototype */ +#include <string.h> +#include <delay.h> +#include <assert.h> +#include "gpio.h" +#include "cpu.h"
#define CON_MASK(x) (0xf << ((x) << 2)) #define CON_SFR(x, v) ((v) << ((x) << 2)) @@ -46,7 +43,6 @@ struct gpio_info { unsigned int max_gpio; /* Maximum GPIO in this part */ };
-#include <cpu/samsung/exynos5250/cpu.h> static const struct gpio_info gpio_data[EXYNOS_GPIO_NUM_PARTS] = { { EXYNOS5_GPIO_PART1_BASE, GPIO_MAX_PORT_PART_1 }, { EXYNOS5_GPIO_PART2_BASE, GPIO_MAX_PORT_PART_2 }, @@ -56,12 +52,9 @@ static const struct gpio_info gpio_data[EXYNOS_GPIO_NUM_PARTS] = { { EXYNOS5_GPIO_PART6_BASE, GPIO_MAX_PORT }, };
-#define HAVE_GENERIC_GPIO - /* This macro gets gpio pin offset from 0..7 */ #define GPIO_BIT(x) ((x) & 0x7)
-//#ifdef HAVE_GENERIC_GPIO static struct s5p_gpio_bank *gpio_get_bank(unsigned int gpio) { const struct gpio_info *data; @@ -79,10 +72,9 @@ static struct s5p_gpio_bank *gpio_get_bank(unsigned int gpio) } }
- assert(gpio < GPIO_MAX_PORT); /* ...which it will not be */ + ASSERT(gpio < GPIO_MAX_PORT); /* ...which it will not be */ return NULL; } -//#endif
/* TODO: Deprecation this interface in favour of asm-generic/gpio.h */ void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg) @@ -192,10 +184,6 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode) }
/* Common GPIO API - only available on Exynos5 */ -/* FIXME(dhendrix): If this stuff is really only applicable to exynos5, - move it to a more sensible location. */ -#ifdef HAVE_GENERIC_GPIO - void gpio_cfg_pin(int gpio, int cfg) { unsigned int value; @@ -277,16 +265,6 @@ void gpio_set_rate(int gpio, int mode) writel(value, &bank->drv); }
-int gpio_request(unsigned gpio, const char *label) -{ - return 0; -} - -int gpio_free(unsigned gpio) -{ - return 0; -} - int gpio_direction_input(unsigned gpio) { gpio_cfg_pin(gpio, EXYNOS_GPIO_INPUT); @@ -332,64 +310,6 @@ int gpio_set_value(unsigned gpio, int value)
return 0; } -#else - -static int s5p_gpio_get_pin(unsigned gpio) -{ - return gpio % GPIO_PER_BANK; -} - -/* - * If we have the old-style GPIO numbering setup, use these functions - * which don't necessary provide sequentially increasing GPIO numbers. - */ -static struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned gpio) -{ - int bank = gpio / GPIO_PER_BANK; - bank *= sizeof(struct s5p_gpio_bank); - - return (struct s5p_gpio_bank *) (s5p_gpio_base(gpio) + bank); -} - -int gpio_request(unsigned gpio, const char *label) -{ - return 0; -} - -int gpio_free(unsigned gpio) -{ - return 0; -} - -int gpio_direction_input(unsigned gpio) -{ - s5p_gpio_direction_input(s5p_gpio_get_bank(gpio), - s5p_gpio_get_pin(gpio)); - return 0; -} - -int gpio_direction_output(unsigned gpio, int value) -{ - s5p_gpio_direction_output(s5p_gpio_get_bank(gpio), - s5p_gpio_get_pin(gpio), value); - return 0; -} - -int gpio_get_value(unsigned gpio) -{ - return (int) s5p_gpio_get_value(s5p_gpio_get_bank(gpio), - s5p_gpio_get_pin(gpio)); -} - -int gpio_set_value(unsigned gpio, int value) -{ - s5p_gpio_set_value(s5p_gpio_get_bank(gpio), - s5p_gpio_get_pin(gpio), value); - - return 0; -} - -#endif /* HAVE_GENERIC_GPIO */
/* * Add a delay here to give the lines time to settle @@ -439,49 +359,8 @@ int gpio_read_mvl3(unsigned gpio)
return value; } - -int gpio_decode_number(unsigned gpio_list[], int count) -{ - int result = 0; - int multiplier = 1; - int gpio, i, value; - enum mvl3 mvl3; - - for (i = 0; i < count; i++) { - gpio = gpio_list[i]; - - mvl3 = gpio_read_mvl3(gpio); - if (mvl3 == LOGIC_1) - value = 2; - else if (mvl3 == LOGIC_0) - value = 1; - else if (mvl3 == LOGIC_Z) - value = 0; - else - return -1; - - result += value * multiplier; - multiplier *= 3; - } - - return result; -} #endif /* __BOOT_BLOCK__ */
-static const char *get_cfg_name(int cfg) -{ - static char name[8]; - - if (cfg == EXYNOS_GPIO_INPUT) - return "input"; - else if (cfg == EXYNOS_GPIO_OUTPUT) - return "output"; - printk(BIOS_INFO, "func %d", cfg); -// sprintf(name, "func %d", cfg); - - return name; -} - /* * Display Exynos GPIO information */ @@ -492,7 +371,14 @@ void gpio_info(void) for (gpio = 0; gpio < GPIO_MAX_PORT; gpio++) { int cfg = gpio_get_cfg(gpio);
- printk(BIOS_INFO, "GPIO_%-3d: %s", gpio, get_cfg_name(cfg)); + printk(BIOS_INFO, "GPIO_%-3d: ", gpio); + if (cfg == EXYNOS_GPIO_INPUT) + printk(BIOS_INFO, "input"); + else if (cfg == EXYNOS_GPIO_OUTPUT) + printk(BIOS_INFO, "output"); + else + printk(BIOS_INFO, "func %d", cfg); + if (cfg == EXYNOS_GPIO_INPUT || cfg == EXYNOS_GPIO_OUTPUT) printk(BIOS_INFO, ", value = %d", gpio_get_value(gpio)); printk(BIOS_INFO, "\n"); diff --git a/src/cpu/samsung/exynos5250/gpio.h b/src/cpu/samsung/exynos5250/gpio.h index 70e7f2d..e70c653 100644 --- a/src/cpu/samsung/exynos5250/gpio.h +++ b/src/cpu/samsung/exynos5250/gpio.h @@ -1,11 +1,11 @@ /* - * (C) Copyright 2010 Samsung Electronics - * Minkyu Kang mk7.kang@samsung.com + * This file is part of the coreboot project. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * Copyright (C) 2010 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -14,14 +14,11 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#ifndef EXYNOS5250_GPIO_H_ -#define EXYNOS5250_GPIO_H_ - -#include <cpu/samsung/exynos5250/cpu.h> /* FIXME: for S5PC110_GPIO_BASE */ +#ifndef CPU_SAMSUNG_EXYNOS5250_GPIO_H +#define CPU_SAMSUNG_EXYNOS5250_GPIO_H
struct s5p_gpio_bank { unsigned int con; @@ -33,99 +30,6 @@ struct s5p_gpio_bank { unsigned char res1[8]; };
-struct s5pc100_gpio { - struct s5p_gpio_bank a0; - struct s5p_gpio_bank a1; - struct s5p_gpio_bank b; - struct s5p_gpio_bank c; - struct s5p_gpio_bank d; - struct s5p_gpio_bank e0; - struct s5p_gpio_bank e1; - struct s5p_gpio_bank f0; - struct s5p_gpio_bank f1; - struct s5p_gpio_bank f2; - struct s5p_gpio_bank f3; - struct s5p_gpio_bank g0; - struct s5p_gpio_bank g1; - struct s5p_gpio_bank g2; - struct s5p_gpio_bank g3; - struct s5p_gpio_bank i; - struct s5p_gpio_bank j0; - struct s5p_gpio_bank j1; - struct s5p_gpio_bank j2; - struct s5p_gpio_bank j3; - struct s5p_gpio_bank j4; - struct s5p_gpio_bank k0; - struct s5p_gpio_bank k1; - struct s5p_gpio_bank k2; - struct s5p_gpio_bank k3; - struct s5p_gpio_bank l0; - struct s5p_gpio_bank l1; - struct s5p_gpio_bank l2; - struct s5p_gpio_bank l3; - struct s5p_gpio_bank l4; - struct s5p_gpio_bank h0; - struct s5p_gpio_bank h1; - struct s5p_gpio_bank h2; - struct s5p_gpio_bank h3; -}; - -struct s5pc110_gpio { - struct s5p_gpio_bank a0; - struct s5p_gpio_bank a1; - struct s5p_gpio_bank b; - struct s5p_gpio_bank c0; - struct s5p_gpio_bank c1; - struct s5p_gpio_bank d0; - struct s5p_gpio_bank d1; - struct s5p_gpio_bank e0; - struct s5p_gpio_bank e1; - struct s5p_gpio_bank f0; - struct s5p_gpio_bank f1; - struct s5p_gpio_bank f2; - struct s5p_gpio_bank f3; - struct s5p_gpio_bank g0; - struct s5p_gpio_bank g1; - struct s5p_gpio_bank g2; - struct s5p_gpio_bank g3; - struct s5p_gpio_bank i; - struct s5p_gpio_bank j0; - struct s5p_gpio_bank j1; - struct s5p_gpio_bank j2; - struct s5p_gpio_bank j3; - struct s5p_gpio_bank j4; - struct s5p_gpio_bank mp0_1; - struct s5p_gpio_bank mp0_2; - struct s5p_gpio_bank mp0_3; - struct s5p_gpio_bank mp0_4; - struct s5p_gpio_bank mp0_5; - struct s5p_gpio_bank mp0_6; - struct s5p_gpio_bank mp0_7; - struct s5p_gpio_bank mp1_0; - struct s5p_gpio_bank mp1_1; - struct s5p_gpio_bank mp1_2; - struct s5p_gpio_bank mp1_3; - struct s5p_gpio_bank mp1_4; - struct s5p_gpio_bank mp1_5; - struct s5p_gpio_bank mp1_6; - struct s5p_gpio_bank mp1_7; - struct s5p_gpio_bank mp1_8; - struct s5p_gpio_bank mp2_0; - struct s5p_gpio_bank mp2_1; - struct s5p_gpio_bank mp2_2; - struct s5p_gpio_bank mp2_3; - struct s5p_gpio_bank mp2_4; - struct s5p_gpio_bank mp2_5; - struct s5p_gpio_bank mp2_6; - struct s5p_gpio_bank mp2_7; - struct s5p_gpio_bank mp2_8; - struct s5p_gpio_bank res1[48]; - struct s5p_gpio_bank h0; - struct s5p_gpio_bank h1; - struct s5p_gpio_bank h2; - struct s5p_gpio_bank h3; -}; - /* functions */ void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg); void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en); @@ -139,16 +43,6 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode); /* GPIO pins per bank */ #define GPIO_PER_BANK 8
-static inline unsigned int s5p_gpio_base(int nr) -{ - return S5PC110_GPIO_BASE; -} - -#define s5pc110_gpio_get_nr(bank, pin) \ - ((((((unsigned int)&(((struct s5pc110_gpio *)S5PC110_GPIO_BASE)->bank))\ - - S5PC110_GPIO_BASE) / sizeof(struct s5p_gpio_bank)) \ - * GPIO_PER_BANK) + pin) - /* Pin configurations */ #define GPIO_INPUT 0x0 #define GPIO_OUTPUT 0x1 @@ -685,41 +579,103 @@ void gpio_set_drv(int gpio, int mode); */ void gpio_set_rate(int gpio, int mode);
-/* FIXME(dhendrix) use generic arch/gpio.h API instead */ -//int gpio_direction_input(unsigned gpio); -//int gpio_direction_output(unsigned gpio, int value); +/* + * reads only a single GPIO + * + * @param gpio GPIO to read + * @return -1 if the value cannot be determined. Otherwise returns + * the corresponding MVL3 enum value. + */ +int gpio_read_mvl3(unsigned gpio); +
-/** - * Decode a list of GPIOs into an integer. +/////////////////////////////// +/* + * Generic GPIO API for U-Boot * - * TODO(sjg@chromium.org): This could perhaps become a generic function? + * GPIOs are numbered from 0 to GPIO_COUNT-1 which value is defined + * by the SOC/architecture. * - * Each GPIO pin can be put into three states using external resistors: - * - pulled up - * - pulled down - * - not connected + * Each GPIO can be an input or output. If an input then its value can + * be read as 0 or 1. If an output then its value can be set to 0 or 1. + * If you try to write an input then the value is undefined. If you try + * to read an output, barring something very unusual, you will get + * back the value of the output that you previously set. * - * Read each GPIO in turn to produce an integer value. The first GPIO - * produces a number 1 * (0 to 2), the second produces 3 * (0 to 2), etc. - * In this way, each GPIO increases the number of possible states by a - * factor of 3. + * In some cases the operation may fail, for example if the GPIO number + * is out of range, or the GPIO is not available because its pin is + * being used by another function. In that case, functions may return + * an error value of -1. + */ + +/** + * Make a GPIO an input. * - * @param gpio_list List of GPIO numbers to decode - * @param count Number of GPIOs in list - * @return -1 if the value cannot be determined, or any GPIO number is - * invalid. Otherwise returns the calculated value + * @param gpio GPIO number + * @return 0 if ok, -1 on error */ -int gpio_decode_number(unsigned gpio_list[], int count); +int gpio_direction_input(unsigned gpio);
-/* - * similar to gpio_decode_number, but reads only a single GPIO +/** + * Make a GPIO an output, and set its value. * - * @param gpio GPIO to read - * @return -1 if the value cannot be determined. Otherwise returns - * the corresponding MVL3 enum value. + * @param gpio GPIO number + * @param value GPIO value (0 for low or 1 for high) + * @return 0 if ok, -1 on error */ -int gpio_read_mvl3(unsigned gpio); +int gpio_direction_output(unsigned gpio, int value); + +/** + * Get a GPIO's value. This will work whether the GPIO is an input + * or an output. + * + * @param gpio GPIO number + * @return 0 if low, 1 if high, -1 on error + */ +int gpio_get_value(unsigned gpio); + +/** + * Set an output GPIO's value. The GPIO must already be an output or + * this function may have no effect. + * + * @param gpio GPIO number + * @param value GPIO value (0 for low or 1 for high) + * @return 0 if ok, -1 on error + */ +int gpio_set_value(unsigned gpio, int value); + + +/////////////////////////////// +
void gpio_info(void);
+enum gpio_types { + GPIO_IN, + GPIO_OUT, + GPIO_ALT, /* catch-all for alternate functions */ +}; + +/* + * Many-value logic (3 states). This can be used for inputs whereby presence + * of external pull-up or pull-down resistors can be added to overcome internal + * pull-ups/pull-downs and force a single value. + * + * Thus, external pull resistors can force a 0 or 1 and if the value changes + * along with internal pull-up/down enable then the input is floating. + * + * Vpd | Vpu | MVL + * ----------------- + * 0 | 0 | 0 + * ----------------- + * 0 | 1 | Z <-- floating input will follow internal pull up/down + * ----------------- + * 1 | 1 | 1 + */ +enum mvl3 { + LOGIC_0, + LOGIC_1, + LOGIC_Z, /* high impedence / tri-stated / floating */ +}; + #endif /* EXYNOS5250_GPIO_H_ */ diff --git a/src/cpu/samsung/exynos5250/i2c.c b/src/cpu/samsung/exynos5250/i2c.c index 21c9394..98eb641 100644 --- a/src/cpu/samsung/exynos5250/i2c.c +++ b/src/cpu/samsung/exynos5250/i2c.c @@ -1,14 +1,12 @@ /* + * This file is part of the coreboot project. + * * (C) Copyright 2002 * David Mueller, ELSOFT AG, d.mueller@elsoft.ch * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -17,22 +15,16 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* This code should work for both the S3C2400 and the S3C2410 - * as they seem to have the same I2C controller inside. - * The different address mapping is handled by the s3c24xx.h files below. + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
+#include <console/console.h> #include <delay.h> #include <arch/io.h> -#include <console/console.h> #include <device/i2c.h> -#include "cpu/samsung/exynos5250/clk.h" -#include "cpu/samsung/exynos5250/i2c.h" -#include "cpu/samsung/exynos5250/pinmux.h" +#include "clk.h" +#include "i2c.h" +#include "pinmux.h"
#define I2C_WRITE 0 #define I2C_READ 1 @@ -61,7 +53,6 @@ enum { };
static struct s3c24x0_i2c_bus i2c_buses[] = { - /* FIXME: exynos5250-specific? */ { .bus_num = 0, .regs = (struct s3c24x0_i2c *)0x12c60000, diff --git a/src/cpu/samsung/exynos5250/i2c.h b/src/cpu/samsung/exynos5250/i2c.h index 0bfee34..a1d8bc1 100644 --- a/src/cpu/samsung/exynos5250/i2c.h +++ b/src/cpu/samsung/exynos5250/i2c.h @@ -1,13 +1,11 @@ /* - * Copyright (C) 2012 Samsung Electronics + * This file is part of the coreboot project. * - * See file CREDITS for list of people who contributed to this - * project. + * Copyright (C) 2012 Samsung Electronics * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -16,15 +14,13 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#ifndef _S3C24X0_I2C_H -#define _S3C24X0_I2C_H +#ifndef CPU_SAMSUNG_EXYNOS5250_I2C_H +#define CPU_SAMSUNG_EXYNOS5250_I2C_H
-/* FIXME: gross hack */ -#include "cpu/samsung/exynos5250/periph.h" +#include "periph.h"
struct s3c24x0_i2c { u32 iiccon; @@ -42,4 +38,4 @@ struct s3c24x0_i2c_bus {
void i2c_init(unsigned bus, int speed, int slaveadd);
-#endif /* _S3C24X0_I2C_H */ +#endif /* CPU_SAMSUNG_EXYNOS5250_I2C_H */ diff --git a/src/cpu/samsung/exynos5250/i2s-regs.h b/src/cpu/samsung/exynos5250/i2s-regs.h index 19267ca..fabd914 100644 --- a/src/cpu/samsung/exynos5250/i2s-regs.h +++ b/src/cpu/samsung/exynos5250/i2s-regs.h @@ -1,16 +1,11 @@ /* - * Copyright (C) 2012 Samsung Electronics - * R. Chandrasekar rcsekar@samsung.com - * - * Taken from the kernel code + * This file is part of the coreboot project. * - * See file CREDITS for list of people who contributed to this - * project. + * Copyright (C) 2012 Samsung Electronics * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -19,12 +14,13 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#ifndef __I2S_REGS_H__ -#define __I2S_REGS_H__ +/* Taken from the kernel code */ + +#ifndef CPU_SAMSUNG_EXYNOS5250_I2S_REGS_H +#define CPU_SAMSUNG_EXYNOS5250_I2S_REGS_H
#define I2SCON 0x0 #define I2SMOD 0x4 @@ -143,4 +139,4 @@ #define I2SSIZE_TRNMSK (0xffff) #define I2SSIZE_SHIFT (16)
-#endif /* __I2S_REGS_H__ */ +#endif /* CPU_SAMSUNG_EXYNOS5250_I2S_REGS_H */ diff --git a/src/cpu/samsung/exynos5250/lowlevel_init_c.c b/src/cpu/samsung/exynos5250/lowlevel_init_c.c deleted file mode 100644 index daa691f..0000000 --- a/src/cpu/samsung/exynos5250/lowlevel_init_c.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Lowlevel setup for SMDK5250 board based on S5PC520 - * - * Copyright (C) 2012 Samsung Electronics - * Copyright (c) 2012 The Chromium OS Authors. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * FIXME: This file is essentially the "bootblock" leftover from U-Boot. For - * now it serves as a reference until all the resume-related stuff is added - * to the appropriate bootblock/romstage/ramstage files in coreboot. - */ - -#include <common.h> -#include <config.h> -#include <cpu/samsung/exynos5-common/exynos5-common.h> -#include <cpu/samsung/exynos5-common/spl.h> -#include <cpu/samsung/exynos5250/clock_init.h> -#include <cpu/samsung/exynos5250/cpu.h> -#include <cpu/samsung/exynos5250/dmc.h> -#include <cpu/samsung/exynos5250/pinmux.h> -#include <cpu/samsung/exynos5250/power.h> -#include <cpu/samsung/exynos5250/setup.h> -#include <cpu/samsung/exynos5250/tzpc.h> -#include "setup.h" - -#include <console/console.h> - -void do_barriers(void); /* FIXME: make gcc shut up about "no previous prototype" */ - -void do_barriers(void) -{ - /* - * The reason we don't write out the instructions dsb/isb/sev: - * While ARM Cortex-A8 supports ARM v7 instruction set (-march=armv7a), - * we compile with -march=armv5 to allow more compilers to work. - * For U-Boot code this has no performance impact. - */ - __asm__ __volatile__( -#if defined(__thumb__) - ".hword 0xF3BF, 0x8F4F\n" /* dsb; darn -march=armv5 */ - ".hword 0xF3BF, 0x8F6F\n" /* isb; darn -march=armv5 */ - ".hword 0xBF40\n" /* sev; darn -march=armv5 */ -#else - ".word 0xF57FF04F\n" /* dsb; darn -march=armv5 */ - ".word 0xF57FF06F\n" /* isb; darn -march=armv5 */ - ".word 0xE320F004\n" /* sev; darn -march=armv5 */ -#endif - ); -} - -/* These are the things we can do during low-level init */ -enum { - DO_WAKEUP = 1 << 0, - DO_UART = 1 << 1, - DO_CLOCKS = 1 << 2, - DO_POWER = 1 << 3, -}; - -int lowlevel_init_subsystems(void) -{ -// uint32_t reset_status; - int actions = 0; - -// do_barriers(); - - /* Setup cpu info which is needed to select correct register offsets */ - cpu_info_init(); - -#if 0 - reset_status = power_read_reset_status(); - - switch (reset_status) { - case S5P_CHECK_SLEEP: - actions = DO_CLOCKS | DO_WAKEUP; - break; - case S5P_CHECK_DIDLE: - case S5P_CHECK_LPA: - actions = DO_WAKEUP; - default: - /* This is a normal boot (not a wake from sleep) */ - actions = DO_UART | DO_CLOCKS | DO_POWER; - } -#endif - - actions = DO_UART | DO_CLOCKS | DO_POWER; - if (actions & DO_POWER) - power_init(); - if (actions & DO_CLOCKS) - system_clock_init(); - if (actions & DO_UART) { - - /* Set up serial UART so we can printf() */ - /* FIXME(dhendrix): add a function for mapping - CONFIG_CONSOLE_SERIAL_UART_ADDRESS to PERIPH_ID_UARTn */ -// exynos_pinmux_config(EXYNOS_UART, PINMUX_FLAG_NONE); - exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE); - - console_init(); - while (1) { - console_tx_byte('C'); - } - } - init_timer(); /* FIXME(dhendrix): was timer_init() */ - -#if 0 - if (actions & DO_CLOCKS) { - mem_ctrl_init(); - tzpc_init(); - } -#endif - -// return actions & DO_WAKEUP; - return 0; -} diff --git a/src/cpu/samsung/exynos5250/mct.c b/src/cpu/samsung/exynos5250/mct.c index db76e9d..4c5cdd1 100644 --- a/src/cpu/samsung/exynos5250/mct.c +++ b/src/cpu/samsung/exynos5250/mct.c @@ -1,28 +1,24 @@ /* - * Copyright 2013 Google Inc. + * This file is part of the coreboot project. * - * See file CREDITS for list of people who contributed to this - * project. + * Copyright 2012 Google Inc. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of + * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#include <arch/io.h> #include <stdint.h> - +#include <arch/io.h> #include "clk.h"
struct __attribute__((packed)) mct_regs diff --git a/src/cpu/samsung/exynos5250/monotonic_timer.c b/src/cpu/samsung/exynos5250/monotonic_timer.c index 7c6229b..6350af5 100644 --- a/src/cpu/samsung/exynos5250/monotonic_timer.c +++ b/src/cpu/samsung/exynos5250/monotonic_timer.c @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2013 Google, Inc. + * Copyright 2013 Google Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/src/cpu/samsung/exynos5250/periph.h b/src/cpu/samsung/exynos5250/periph.h index e14829e..7d8bf62 100644 --- a/src/cpu/samsung/exynos5250/periph.h +++ b/src/cpu/samsung/exynos5250/periph.h @@ -1,10 +1,11 @@ /* - * (C) Copyright 2012 The Chromium Authors + * This file is part of the coreboot project. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * Copyright 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -13,13 +14,11 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#ifndef __EXYNOS_PERIPH_H -#define __EXYNOS_PERIPH_H +#ifndef CPU_SAMSUNG_EXYNOS5250_PERIPH_H +#define CPU_SAMSUNG_EXYNOS5250_PERIPH_H
/* * Peripherals requiring clock/pinmux configuration. List will @@ -38,7 +37,6 @@ enum periph_id { PERIPH_ID_SDMMC2, PERIPH_ID_SDMMC3,
- /* TODO: make sequential again when FDT doesn't hardcode. */ PERIPH_ID_SROMC = 9, PERIPH_ID_SPI0, PERIPH_ID_SPI1, diff --git a/src/cpu/samsung/exynos5250/pinmux.c b/src/cpu/samsung/exynos5250/pinmux.c index 907ee80..747ecab 100644 --- a/src/cpu/samsung/exynos5250/pinmux.c +++ b/src/cpu/samsung/exynos5250/pinmux.c @@ -1,32 +1,27 @@ /* - * Copyright (c) 2012 Samsung Electronics. - * Abhilash Kesavan a.kesavan@samsung.com + * This file is part of the coreboot project. * - * See file CREDITS for list of people who contributed to this - * project. + * Copyright (C) 2012 Samsung Electronics * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#include <common.h> -#include <arch/gpio.h> -#include <cpu/samsung/exynos5250/gpio.h> -#include <cpu/samsung/exynos5250/cpu.h> -#include <cpu/samsung/exynos5250/pinmux.h> -#include <cpu/samsung/exynos5250/sromc.h> +#include <console/console.h> +#include <assert.h> +#include "gpio.h" +#include "cpu.h" +#include "pinmux.h"
int exynos_pinmux_config(enum periph_id peripheral, int flags) { @@ -88,16 +83,16 @@ int exynos_pinmux_config(enum periph_id peripheral, int flags) * TODO: Need to add defintions for GPC4 before * enabling this. */ - debug("SDMMC3 not supported yet"); + printk(BIOS_DEBUG, "SDMMC3 not supported yet"); return -1; } if ((flags & PINMUX_FLAG_8BIT_MODE) && !start_ext) { - debug("SDMMC device %d does not support 8bit mode", + printk(BIOS_DEBUG, "SDMMC device %d does not support 8bit mode", peripheral); return -1; } if (flags & PINMUX_FLAG_8BIT_MODE) { - assert(peripheral == PERIPH_ID_SDMMC0); + ASSERT(peripheral == PERIPH_ID_SDMMC0); for (i = 0; i <= 3; i++) { gpio_cfg_pin(start_ext + i, pin_ext); gpio_set_pull(start_ext + i, @@ -295,7 +290,7 @@ int exynos_pinmux_config(enum periph_id peripheral, int flags) gpio_cfg_pin(GPIO_B00 + i, EXYNOS_GPIO_FUNC(0x02)); break; default: - debug("%s: invalid peripheral %d", __func__, peripheral); + printk(BIOS_DEBUG, "%s: invalid peripheral %d", __func__, peripheral); return -1; }
diff --git a/src/cpu/samsung/exynos5250/pinmux.h b/src/cpu/samsung/exynos5250/pinmux.h index 81c0087..bf6a081 100644 --- a/src/cpu/samsung/exynos5250/pinmux.h +++ b/src/cpu/samsung/exynos5250/pinmux.h @@ -1,29 +1,25 @@ /* - * Copyright (C) 2012 Samsung Electronics + * This file is part of the coreboot project. * - * See file CREDITS for list of people who contributed to this - * project. + * Copyright (C) 2012 Samsung Electronics * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#ifndef __EXYNOS_PINMUX_H -#define __EXYNOS_PINMUX_H +#ifndef CPU_SAMSUNG_EXYNOS5250_PINMUX_H +#define CPU_SAMSUNG_EXYNOS5250_PINMUX_H
-//#include <asm/arch/periph.h> #include "periph.h"
enum { diff --git a/src/cpu/samsung/exynos5250/power.c b/src/cpu/samsung/exynos5250/power.c index ffba8c5..029efc9 100644 --- a/src/cpu/samsung/exynos5250/power.c +++ b/src/cpu/samsung/exynos5250/power.c @@ -1,15 +1,11 @@ /* - * Power setup code for EXYNOS5 + * This file is part of the coreboot project. * * Copyright (C) 2012 Samsung Electronics * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -18,18 +14,17 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#include <common.h> -#include <arch/hlt.h> +/* Power setup code for EXYNOS5 */ + +#include <console/console.h> #include <arch/io.h> #include <arch/hlt.h> -#include <console/console.h> -#include <cpu/samsung/exynos5250/cpu.h> -#include <cpu/samsung/exynos5250/power.h> -#include <cpu/samsung/exynos5250/sysreg.h> +#include "cpu.h" +#include "power.h" +#include "sysreg.h"
static void ps_hold_setup(void) { @@ -81,7 +76,7 @@ void power_enable_usb_phy(void) /* Setting USB20PHY_CONFIG register to USB 2.0 HOST link */ phy_cfg = readl(&sysreg->usb20_phy_cfg); if (phy_cfg & USB20_PHY_CFG_EN) { - debug("USB 2.0 HOST link already selected\n"); + printk(BIOS_DEBUG, "USB 2.0 HOST link already selected\n"); } else { phy_cfg |= USB20_PHY_CFG_EN; writel(phy_cfg, &sysreg->usb20_phy_cfg); diff --git a/src/cpu/samsung/exynos5250/power.h b/src/cpu/samsung/exynos5250/power.h index e82a94b..f349e53 100644 --- a/src/cpu/samsung/exynos5250/power.h +++ b/src/cpu/samsung/exynos5250/power.h @@ -1,11 +1,11 @@ /* - * (C) Copyright 2012 Samsung Electronics - * Register map for Exynos5 PMU + * This file is part of the coreboot project. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * Copyright (C) 2012 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -14,28 +14,13 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#ifndef __EXYNOS5_POWER_H__ -#define __EXYNOS5_POWER_H__ +/* Register map for Exynos5 PMU */
-/* - * Power control - */ -#define S5PC100_OTHERS 0xE0108200 -#define S5PC100_RST_STAT 0xE0108300 -#define S5PC100_SLEEP_WAKEUP (1 << 3) -#define S5PC100_WAKEUP_STAT 0xE0108304 -#define S5PC100_INFORM0 0xE0108400 - -#define S5PC110_RST_STAT 0xE010A000 -#define S5PC110_SLEEP_WAKEUP (1 << 3) -#define S5PC110_WAKEUP_STAT 0xE010C200 -#define S5PC110_OTHERS 0xE010E000 -#define S5PC110_USB_PHY_CON 0xE010E80C -#define S5PC110_INFORM0 0xE010F000 +#ifndef CPU_SAMSUNG_EXYNOS5250_POWER_H +#define CPU_SAMSUNG_EXYNOS5250_POWER_H
/* Enable HW thermal trip with PS_HOLD_CONTROL register ENABLE_HW_TRIP bit */ void power_enable_hw_thermal_trip(void); diff --git a/src/cpu/samsung/exynos5250/pwm.c b/src/cpu/samsung/exynos5250/pwm.c index 66a3b9d..34fc2b1 100644 --- a/src/cpu/samsung/exynos5250/pwm.c +++ b/src/cpu/samsung/exynos5250/pwm.c @@ -1,15 +1,11 @@ /* - * Copyright (C) 2011 Samsung Electronics - * - * Donghwa Lee dh09.lee@samsung.com + * This file is part of the coreboot project. * - * See file CREDITS for list of people who contributed to this - * project. + * Copyright (C) 2011 Samsung Electronics * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -18,16 +14,14 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#include <common.h> #include <arch/io.h> -#include <cpu/samsung/exynos5250/clk.h> -#include <cpu/samsung/exynos5250/cpu.h> -#include <cpu/samsung/exynos5250/periph.h> -#include <cpu/samsung/exynos5250/pwm.h> +#include "clk.h" +#include "cpu.h" +#include "periph.h" +#include "pwm.h"
int pwm_enable(int pwm_id) { @@ -100,11 +94,9 @@ int pwm_config(int pwm_id, int duty_ns, int period_ns) */ if (period_ns > NS_IN_SEC || duty_ns > NS_IN_SEC || period_ns == 0) return -1; -// return -ERANGE;
if (duty_ns > period_ns) return -1; -// return -EINVAL;
frequency = NS_IN_SEC / period_ns;
diff --git a/src/cpu/samsung/exynos5250/pwm.h b/src/cpu/samsung/exynos5250/pwm.h index d7aa76f..948bb6d 100644 --- a/src/cpu/samsung/exynos5250/pwm.h +++ b/src/cpu/samsung/exynos5250/pwm.h @@ -1,12 +1,11 @@ /* + * This file is part of the coreboot project. + * * Copyright (C) 2009 Samsung Electronics - * Kyungmin Park kyungmin.park@samsung.com - * Minkyu Kang mk7.kang@samsung.com * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -15,12 +14,11 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#ifndef __ASM_ARM_ARCH_COMMON_PWM_H_ -#define __ASM_ARM_ARCH_COMMON_PWM_H_ +#ifndef CPU_SAMSUNG_EXYNOS5250_PWM_H +#define CPU_SAMSUNG_EXYNOS5250_PWM_H
#define PRESCALER_0 (8 - 1) /* prescaler of timer 0, 1 */ #define PRESCALER_1 (16 - 1) /* prescaler of timer 2, 3, 4 */ @@ -42,7 +40,6 @@ #define TCON_AUTO_RELOAD(x) (1 << (TCON_OFFSET(x) + 3)) #define TCON4_AUTO_RELOAD (1 << 22)
-#ifndef __ASSEMBLER__ struct s5p_timer { unsigned int tcfg0; unsigned int tcfg1; @@ -69,6 +66,5 @@ int pwm_check_enabled(int pwm_id); void pwm_disable(int pwm_id); int pwm_enable(int pwm_id); int pwm_init(int pwm_id, int div, int invert); -#endif /* __ASSEMBLER__ */
#endif diff --git a/src/cpu/samsung/exynos5250/reset.c b/src/cpu/samsung/exynos5250/reset.c index 6cbc1d8..78571ba 100644 --- a/src/cpu/samsung/exynos5250/reset.c +++ b/src/cpu/samsung/exynos5250/reset.c @@ -1,24 +1,20 @@ /* - * Copyright (c) 2010 Samsung Electronics. - * Minkyu Kang mk7.kang@samsung.com + * This file is part of the coreboot project. * - * See file CREDITS for list of people who contributed to this - * project. + * Copyright 2013 Google Inc. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
#include <reset.h> diff --git a/src/cpu/samsung/exynos5250/s5p-dp-core.h b/src/cpu/samsung/exynos5250/s5p-dp-core.h deleted file mode 100644 index e7a1bd8..0000000 --- a/src/cpu/samsung/exynos5250/s5p-dp-core.h +++ /dev/null @@ -1,259 +0,0 @@ -/* - * Header file for Samsung DP (Display Port) interface driver. - * - * Copyright 2013 Google Inc. - * Copyright (C) 2012 Samsung Electronics Co., Ltd. - * Author: Jingoo Han jg1.han@samsung.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef _S5P_DP_CORE_H -#define _S5P_DP_CORE_H - -#define STREAM_ON_TIMEOUT 100 -#define PLL_LOCK_TIMEOUT 10 -#define DP_INIT_TRIES 10 -#define MAX_CR_LOOP 5 -#define MAX_EQ_LOOP 4 - -/* Link tare type */ -enum link_rate { - LINK_RATE_1_62GBPS = 0x06, - LINK_RATE_2_70GBPS = 0x0a -}; - -/* Number of lanes supported */ -enum link_lane_count { - LANE_COUNT1 = 1, - LANE_COUNT2 = 2, - LANE_COUNT4 = 4 -}; - -/* Pre emphasis level */ -enum pre_emphasis_level { - PRE_EMPHASIS_LEVEL_0, - PRE_EMPHASIS_LEVEL_1, - PRE_EMPHASIS_LEVEL_2, - PRE_EMPHASIS_LEVEL_3, -}; - -/* Type of color space */ -enum color_space { - COLOR_RGB, - COLOR_YCBCR422, - COLOR_YCBCR444 -}; - -/* Video input Bit Per Color */ -enum color_depth { - COLOR_6, - COLOR_8, - COLOR_10, - COLOR_12 -}; - -/* Type of YCbCr coefficient */ -enum color_coefficient { - COLOR_YCBCR601, - COLOR_YCBCR709 -}; - -/* Color range */ -enum dynamic_range { - VESA, - CEA -}; - -/* Status of PLL clock */ -enum pll_status { - PLL_UNLOCKED, - PLL_LOCKED -}; - -/* To choose type of m_value */ -enum clock_recovery_m_value_type { - CALCULATED_M, - REGISTER_M -}; - -struct video_info { - enum color_space color_space; - enum dynamic_range dynamic_range; - enum color_coefficient ycbcr_coeff; - enum color_depth color_depth; - - enum link_rate link_rate; - enum link_lane_count lane_count; - - char *name; - - unsigned int h_sync_polarity:1; - unsigned int v_sync_polarity:1; - unsigned int interlaced:1; -}; - -struct link_train { - u8 link_rate; - u8 lane_count; -}; - -struct s5p_dp_device { - unsigned int irq; - struct exynos5_dp *base; - struct video_info *video_info; - struct link_train link_train; -}; - -/* this struct is used by mainboards to pass mode info to the driver */ -typedef struct vidinfo { - u16 vl_col; - u16 vl_row; - u8 vl_bpix; - u16 *cmap; -} vidinfo_t; - -/* s5p_dp_reg.c */ - -/* - * Reset DP module - * - * param dp pointer to main s5p-dp structure - */ -void s5p_dp_reset(struct s5p_dp_device *dp); -/* - * Initialize DP to recieve video stream - * - * param dp pointer to main s5p-dp structure - */ -void s5p_dp_init_video(struct s5p_dp_device *dp); -/* - * Check whether PLL is locked - * - * param dp pointer to main s5p-dp structure - * return Lock status - */ -unsigned int s5p_dp_get_pll_lock_status(struct s5p_dp_device *dp); -/* - * Initialize analog functions of DP - * - * param dp pointer to main s5p-dp structure - * return 0 on success - */ -int s5p_dp_init_analog_func(struct s5p_dp_device *dp); -/* - * Initialize DP for AUX transaction - * - * param dp pointer to main s5p-dp structure - */ -void s5p_dp_init_aux(struct s5p_dp_device *dp); - -/* - * Start an AUX transaction. - * - * param dp pointer to main s5p-dp structure - */ -int s5p_dp_start_aux_transaction(struct s5p_dp_device *dp); - -/* - * Write a byte to DPCD register - * - * param dp pointer to main s5p-dp structure - * param reg_addr DPCD register to be written - * param data byte data to be written - * return write status - */ -int s5p_dp_write_byte_to_dpcd(struct s5p_dp_device *dp, - unsigned int reg_addr, - unsigned char data); -/* - * Read a byte from DPCD register - * - * param dp pointer to main s5p-dp structure - * param reg_addr DPCD register to read - * param data read byte data - * return read status - */ -int s5p_dp_read_byte_from_dpcd(struct s5p_dp_device *dp, - unsigned int reg_addr, - unsigned char *data); -/* - * Initialize DP video functions - * - * param dp pointer to main s5p-dp structure - */ -//void s5p_dp_init_video(struct s5p_dp_device *dp); - -/* - * Set color parameters for display - * - * param dp pointer to main s5p-dp structure - * param color_depth Video input Bit Per Color - * param color_space Colorimetric format of input video - * param dynamic_range VESA range or CEA range - * param coeff YCbCr Coefficients of input video - */ -void s5p_dp_set_video_color_format(struct s5p_dp_device *dp, - unsigned int color_depth, - unsigned int color_space, - unsigned int dynamic_range, - unsigned int coeff); -/* - * Check whether video clock is on - * - * param dp pointer to main s5p-dp structure - * return clock status - */ -int s5p_dp_is_slave_video_stream_clock_on(struct s5p_dp_device *dp); -/* - * Check whether video clock is on - * - * param dp pointer to main s5p-dp structure - * param type clock_recovery_m_value_type - * param m_value to caluculate m_vid value - * param n_value to caluculate n_vid value - */ -void s5p_dp_set_video_cr_mn(struct s5p_dp_device *dp, - enum clock_recovery_m_value_type type, - unsigned int m_value, - unsigned int n_value); -/* - * Set DP to video slave mode thereby enabling video master - * - * param dp pointer to main s5p-dp structure - */ -void s5p_dp_enable_video_master(struct s5p_dp_device *dp); -/* - * Check whether video stream is on - * - * param dp pointer to main s5p-dp structure - * return video stream status - */ -int s5p_dp_is_video_stream_on(struct s5p_dp_device *dp); -/* - * Configure DP in slave mode - * - * param dp pointer to main s5p-dp structure - * param video_info pointer to main video_info structure. - */ -void s5p_dp_config_video_slave_mode(struct s5p_dp_device *dp, - struct video_info *video_info); - -/* - * Wait unitl HW link training done - * - * param dp pointer to main s5p-dp structure - */ -void s5p_dp_wait_hw_link_training_done(struct s5p_dp_device *dp); - -/* startup and init */ -struct exynos5_fimd_panel; -void fb_init(vidinfo_t *panel_info, void *lcdbase, - struct exynos5_fimd_panel *pd); -int dp_controller_init(struct s5p_dp_device *dp_device); -int lcd_ctrl_init(vidinfo_t *panel_info, - struct exynos5_fimd_panel *panel_data, void *lcdbase); -#endif /* _S5P_DP_CORE_H */ diff --git a/src/cpu/samsung/exynos5250/s5p-dp-reg.c b/src/cpu/samsung/exynos5250/s5p-dp-reg.c deleted file mode 100644 index 5590197..0000000 --- a/src/cpu/samsung/exynos5250/s5p-dp-reg.c +++ /dev/null @@ -1,486 +0,0 @@ -/* - * Samsung DP (Display port) register interface driver. - * - * Copyright (C) 2012 Samsung Electronics Co., Ltd. - * Author: Jingoo Han jg1.han@samsung.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <common.h> -#include <arch/io.h> -#include <cpu/samsung/exynos5250/clk.h> -#include <cpu/samsung/exynos5250/cpu.h> -#include <cpu/samsung/exynos5250/periph.h> -#include <cpu/samsung/exynos5250/s5p-dp.h> -#include "cpu/samsung/exynos5250/fimd.h" -#include "s5p-dp-core.h" - -#include <console/console.h> - -void s5p_dp_reset(struct s5p_dp_device *dp) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - writel(RESET_DP_TX, &base->dp_tx_sw_reset); - - /* Stop Video */ - clrbits_le32(&base->video_ctl_1, VIDEO_EN); - clrbits_le32(&base->video_ctl_1, HDCP_VIDEO_MUTE); - - reg = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N | - AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N | - HDCP_FUNC_EN_N | SW_FUNC_EN_N; - writel(reg, &base->func_en_1); - - reg = SSC_FUNC_EN_N | AUX_FUNC_EN_N | - SERDES_FIFO_FUNC_EN_N | - LS_CLK_DOMAIN_FUNC_EN_N; - writel(reg, &base->func_en_2); - - udelay(20); - - reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 | - LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0; - - writel(reg, &base->lane_map); - - writel(0x0, &base->sys_ctl_1); - writel(0x40, &base->sys_ctl_2); - writel(0x0, &base->sys_ctl_3); - writel(0x0, &base->sys_ctl_4); - - writel(0x0, &base->pkt_send_ctl); - writel(0x0, &base->dp_hdcp_ctl); - - writel(0x5e, &base->dp_hpd_deglitch_l); - writel(0x1a, &base->dp_hpd_deglitch_h); - - writel(0x10, &base->dp_debug_ctl); - - writel(0x0, &base->dp_phy_test); - - writel(0x0, &base->dp_video_fifo_thrd); - writel(0x20, &base->dp_audio_margin); - - writel(0x4, &base->m_vid_gen_filter_th); - writel(0x2, &base->m_aud_gen_filter_th); - - writel(0x00000101, &base->soc_general_ctl); - - /* Set Analog Parameters */ - writel(0x10, &base->analog_ctl_1); - writel(0x0C, &base->analog_ctl_2); - writel(0x85, &base->analog_ctl_3); - writel(0x66, &base->pll_filter_ctl_1); - writel(0x0, &base->tx_amp_tuning_ctl); - - /* Set interrupt pin assertion polarity as high */ - writel(INT_POL0 | INT_POL1, &base->int_ctl); - - /* Clear pending regisers */ - writel(0xff, &base->common_int_sta_1); - writel(0x4f, &base->common_int_sta_2); - writel(0xe0, &base->common_int_sta_3); - writel(0xe7, &base->common_int_sta_4); - writel(0x63, &base->dp_int_sta); - - /* 0:mask,1: unmask */ - writel(0x00, &base->common_int_mask_1); - writel(0x00, &base->common_int_mask_2); - writel(0x00, &base->common_int_mask_3); - writel(0x00, &base->common_int_mask_4); - writel(0x00, &base->int_sta_mask); -} - -unsigned int s5p_dp_get_pll_lock_status(struct s5p_dp_device *dp) -{ - u32 reg; - - reg = readl(&dp->base->dp_debug_ctl); - if (reg & PLL_LOCK) - return PLL_LOCKED; - else - return PLL_UNLOCKED; -} - -int s5p_dp_init_analog_func(struct s5p_dp_device *dp) -{ - u32 reg; - u32 start; - struct exynos5_dp *base = dp->base; - - writel(0x00, &base->dp_phy_pd); - - reg = PLL_LOCK_CHG; - writel(reg, &base->common_int_sta_1); - - clrbits_le32(&base->dp_debug_ctl, (F_PLL_LOCK | PLL_LOCK_CTRL)); - - /* Power up PLL */ - if (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { - - clrbits_le32(&base->dp_pll_ctl, DP_PLL_PD); - - start = get_timer(0); - while (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { - if (get_timer(start) > PLL_LOCK_TIMEOUT) { - printk(BIOS_ERR, "%s: PLL is not locked\n", - __func__); - return -1; - } - } - } - - /* Enable Serdes FIFO function and Link symbol clock domain module */ - clrbits_le32(&base->func_en_2, (SERDES_FIFO_FUNC_EN_N | - LS_CLK_DOMAIN_FUNC_EN_N | AUX_FUNC_EN_N)); - return 0; -} - -void s5p_dp_init_aux(struct s5p_dp_device *dp) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - /* Clear inerrupts related to AUX channel */ - reg = RPLY_RECEIV | AUX_ERR; - writel(reg, &base->dp_int_sta); - - /* Disable AUX channel module */ - setbits_le32(&base->func_en_2, AUX_FUNC_EN_N); - - /* Disable AUX transaction H/W retry */ - reg = (3 & AUX_BIT_PERIOD_MASK) << AUX_BIT_PERIOD_SHIFT; - reg |= (0 & AUX_HW_RETRY_COUNT_MASK) << AUX_HW_RETRY_COUNT_SHIFT; - reg |= (AUX_HW_RETRY_INTERVAL_600_US << AUX_HW_RETRY_INTERVAL_SHIFT); - writel(reg, &base->aux_hw_retry_ctl) ; - - /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */ - reg = DEFER_CTRL_EN; - reg |= (1 & DEFER_COUNT_MASK) << DEFER_COUNT_SHIFT; - writel(reg, &base->aux_ch_defer_dtl); - - /* Enable AUX channel module */ - clrbits_le32(&base->func_en_2, AUX_FUNC_EN_N); -} - -int s5p_dp_start_aux_transaction(struct s5p_dp_device *dp) -{ - int reg; - struct exynos5_dp *base = dp->base; - - /* Enable AUX CH operation */ - setbits_le32(&base->aux_ch_ctl_2, AUX_EN); - - /* Is AUX CH command reply received? */ - reg = readl(&base->dp_int_sta); - while (!(reg & RPLY_RECEIV)) - reg = readl(&base->dp_int_sta); - - /* Clear interrupt source for AUX CH command reply */ - writel(RPLY_RECEIV, &base->dp_int_sta); - - /* Clear interrupt source for AUX CH access error */ - reg = readl(&base->dp_int_sta); - if (reg & AUX_ERR) { - printk(BIOS_ERR, "%s: AUX_ERR encountered, dp_int_sta: " - "0x%02x\n", __func__, reg); - writel(AUX_ERR, &base->dp_int_sta); - return -1; - } - - /* Check AUX CH error access status */ - reg = readl(&base->dp_int_sta); - if ((reg & AUX_STATUS_MASK) != 0) { - printk(BIOS_ERR, "AUX CH error happens: %d\n\n", - reg & AUX_STATUS_MASK); - return -1; - } - - return 0; -} - -int s5p_dp_write_byte_to_dpcd(struct s5p_dp_device *dp, - unsigned int reg_addr, - unsigned char data) -{ - u32 reg; - int i; - int retval; - struct exynos5_dp *base = dp->base; - - for (i = 0; i < MAX_AUX_RETRY_COUNT; i++) { - /* Clear AUX CH data buffer */ - writel(BUF_CLR, &base->buf_data_ctl); - - /* Select DPCD device address */ - reg = reg_addr >> AUX_ADDR_7_0_SHIFT; - reg &= AUX_ADDR_7_0_MASK; - writel(reg, &base->aux_addr_7_0); - reg = reg_addr >> AUX_ADDR_15_8_SHIFT; - reg &= AUX_ADDR_15_8_MASK; - writel(reg, &base->aux_addr_15_8); - reg = reg_addr >> AUX_ADDR_19_16_SHIFT; - reg &= AUX_ADDR_19_16_MASK; - writel(reg, &base->aux_addr_19_16); - - /* Write data buffer */ - reg = (unsigned int)data; - writel(reg, &base->buf_data_0); - - /* - * Set DisplayPort transaction and write 1 byte - * If bit 3 is 1, DisplayPort transaction. - * If Bit 3 is 0, I2C transaction. - */ - reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; - writel(reg, &base->aux_ch_ctl_1); - - /* Start AUX transaction */ - retval = s5p_dp_start_aux_transaction(dp); - if (retval == 0) - break; - else - printk(BIOS_DEBUG, "Aux Transaction fail!\n"); - } - - return retval; -} - -int s5p_dp_read_byte_from_dpcd(struct s5p_dp_device *dp, - unsigned int reg_addr, - unsigned char *data) -{ - u32 reg; - int i; - int retval; - struct exynos5_dp *base = dp->base; - - for (i = 0; i < MAX_AUX_RETRY_COUNT; i++) { - /* Clear AUX CH data buffer */ - writel(BUF_CLR, &base->buf_data_ctl); - - /* Select DPCD device address */ - reg = reg_addr >> AUX_ADDR_7_0_SHIFT; - reg &= AUX_ADDR_7_0_MASK; - writel(reg, &base->aux_addr_7_0); - reg = reg_addr >> AUX_ADDR_15_8_SHIFT; - reg &= AUX_ADDR_15_8_MASK; - writel(reg, &base->aux_addr_15_8); - reg = reg_addr >> AUX_ADDR_19_16_SHIFT; - reg &= AUX_ADDR_19_16_MASK; - writel(reg, &base->aux_addr_19_16); - - /* - * Set DisplayPort transaction and read 1 byte - * If bit 3 is 1, DisplayPort transaction. - * If Bit 3 is 0, I2C transaction. - */ - reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; - writel(reg, &base->aux_ch_ctl_1); - - /* Start AUX transaction */ - retval = s5p_dp_start_aux_transaction(dp); - if (retval == 0) - break; - else - printk(BIOS_DEBUG, "Aux Transaction fail!\n"); - } - - /* Read data buffer */ - if (!retval) { - reg = readl(&base->buf_data_0); - *data = (unsigned char)(reg & 0xff); - } - - return retval; -} - -void s5p_dp_init_video(struct s5p_dp_device *dp) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG; - writel(reg, &base->common_int_sta_1); - - reg = 0x0; - writel(reg, &base->sys_ctl_1); - - reg = (4 & CHA_CRI_MASK) << CHA_CRI_SHIFT; - reg |= CHA_CTRL; - writel(reg, &base->sys_ctl_2); - - reg = 0x0; - writel(reg, &base->sys_ctl_3); -} - -void s5p_dp_set_video_color_format(struct s5p_dp_device *dp, - unsigned int color_depth, - unsigned int color_space, - unsigned int dynamic_range, - unsigned int coeff) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - /* Configure the input color depth, color space, dynamic range */ - reg = (dynamic_range << IN_D_RANGE_SHIFT) | - (color_depth << IN_BPC_SHIFT) | - (color_space << IN_COLOR_F_SHIFT); - writel(reg, &base->video_ctl_2); - - /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */ - reg = readl(&base->video_ctl_3); - reg &= ~IN_YC_COEFFI_MASK; - if (coeff) - reg |= IN_YC_COEFFI_ITU709; - else - reg |= IN_YC_COEFFI_ITU601; - writel(reg, &base->video_ctl_3); -} - -int s5p_dp_is_slave_video_stream_clock_on(struct s5p_dp_device *dp) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - reg = readl(&base->sys_ctl_1); - writel(reg, &base->sys_ctl_1); - - reg = readl(&base->sys_ctl_1); - - if (!(reg & DET_STA)) - return -1; - - reg = readl(&base->sys_ctl_2); - writel(reg, &base->sys_ctl_2); - - reg = readl(&base->sys_ctl_2); - - if (reg & CHA_STA) { - printk(BIOS_DEBUG, "Input stream clk is changing\n"); - return -1; - } - - return 0; -} - -void s5p_dp_set_video_cr_mn(struct s5p_dp_device *dp, - enum clock_recovery_m_value_type type, - unsigned int m_value, - unsigned int n_value) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - if (type == REGISTER_M) { - setbits_le32(&base->sys_ctl_4, FIX_M_VID); - - reg = m_value >> M_VID_0_VALUE_SHIFT; - writel(reg, &base->m_vid_0); - - reg = (m_value >> M_VID_1_VALUE_SHIFT); - writel(reg, &base->m_vid_1); - - reg = (m_value >> M_VID_2_VALUE_SHIFT); - writel(reg, &base->m_vid_2); - - reg = n_value >> N_VID_0_VALUE_SHIFT; - writel(reg, &base->n_vid_0); - - reg = (n_value >> N_VID_1_VALUE_SHIFT); - writel(reg, &base->n_vid_1); - - reg = (n_value >> N_VID_2_VALUE_SHIFT); - writel(reg, &base->n_vid_2); - } else { - clrbits_le32(&base->sys_ctl_4, FIX_M_VID); - - writel(0x00, &base->n_vid_0); - writel(0x80, &base->n_vid_1); - writel(0x00, &base->n_vid_2); - } -} - -void s5p_dp_enable_video_master(struct s5p_dp_device *dp) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - reg = readl(&base->soc_general_ctl); - reg &= ~VIDEO_MODE_MASK; - reg |= VIDEO_MODE_SLAVE_MODE; - writel(reg, &base->soc_general_ctl); -} - -int s5p_dp_is_video_stream_on(struct s5p_dp_device *dp) -{ - u32 reg, i = 0; - u32 start; - struct exynos5_dp *base = dp->base; - - /* Wait for 4 VSYNC_DET interrupts */ - start = get_timer(0); - do { - reg = readl(&base->common_int_sta_1); - if (reg & VSYNC_DET) { - i++; - writel(reg | VSYNC_DET, &base->common_int_sta_1); - } - if (i == 4) - break; - } while (get_timer(start) <= STREAM_ON_TIMEOUT); - - if (i != 4) { - printk(BIOS_DEBUG, "s5p_dp_is_video_stream_on timeout\n"); - return -1; - } - - return 0; -} - -void s5p_dp_config_video_slave_mode(struct s5p_dp_device *dp, - struct video_info *video_info) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - reg = readl(&base->func_en_1); - reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N); - reg |= MASTER_VID_FUNC_EN_N; - writel(reg, &base->func_en_1); - - reg = readl(&base->video_ctl_10); - reg &= ~INTERACE_SCAN_CFG; - reg |= (video_info->interlaced << 2); - writel(reg, &base->video_ctl_10); - - reg = readl(&base->video_ctl_10); - reg &= ~VSYNC_POLARITY_CFG; - reg |= (video_info->v_sync_polarity << 1); - writel(reg, &base->video_ctl_10); - - reg = readl(&base->video_ctl_10); - reg &= ~HSYNC_POLARITY_CFG; - reg |= (video_info->h_sync_polarity << 0); - writel(reg, &base->video_ctl_10); - - reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE; - writel(reg, &base->soc_general_ctl); -} - -void s5p_dp_wait_hw_link_training_done(struct s5p_dp_device *dp) -{ - u32 reg; - struct exynos5_dp *base = dp->base; - - reg = readl(&base->dp_hw_link_training); - while (reg & HW_TRAINING_EN) - reg = readl(&base->dp_hw_link_training); -} diff --git a/src/cpu/samsung/exynos5250/s5p-dp.h b/src/cpu/samsung/exynos5250/s5p-dp.h deleted file mode 100644 index e11ac3b..0000000 --- a/src/cpu/samsung/exynos5250/s5p-dp.h +++ /dev/null @@ -1,514 +0,0 @@ -/* - * Copyright 2013 Google Inc. - * (C) Copyright 2012 Samsung Electronics - * Register map for Exynos5 DP - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __EXYNOS5_DP_H__ -#define __EXYNOS5_DP_H__ - -/* DSIM register map */ -struct exynos5_dp { - u8 res1[0x10]; - u32 dp_tx_version; - u32 dp_tx_sw_reset; - u32 func_en_1; - u32 func_en_2; - u32 video_ctl_1; - u32 video_ctl_2; - u32 video_ctl_3; - u32 video_ctl_4; - u32 clr_blue_cb; - u32 clr_green_y; - u32 clr_red_cr; - u32 video_ctl_8; - u8 res2[0x4]; - u32 video_ctl_10; - u32 total_line_l; - u32 total_line_h; - u32 active_line_l; - u32 active_line_h; - u32 v_f_porch; - u32 vsync; - u32 v_b_porch; - u32 total_pixel_l; - u32 total_pixel_h; - u32 active_pixel_l; - u32 active_pixel_h; - u32 h_f_porch_l; - u32 h_f_porch_h; - u32 hsync_l; - u32 hysnc_h; - u32 h_b_porch_l; - u32 h_b_porch_h; - u32 vid_status; - u32 total_line_sta_l; - u32 total_line_sta_h; - u32 active_line_sta_l; - u32 active_line_sta_h; - u32 v_f_porch_sta; - u32 vsync_sta; - u32 v_b_porch_sta; - u32 total_pixel_sta_l; - u32 total_pixel_sta_h; - u32 active_pixel_sta_l; - u32 active_pixel_sta_h; - u32 h_f_porch_sta_l; - u32 h_f_porch_sta_h; - u32 hsync_sta_l; - u32 hsync_sta_h; - u32 h_b_porch_sta_l; - u32 h_b_porch__sta_h; - u8 res3[0x288]; - u32 lane_map; - u8 res4[0x10]; - u32 analog_ctl_1; - u32 analog_ctl_2; - u32 analog_ctl_3; - u32 pll_filter_ctl_1; - u32 tx_amp_tuning_ctl; - u8 res5[0xc]; - u32 aux_hw_retry_ctl; - u8 res6[0x2c]; - u32 int_state; - u32 common_int_sta_1; - u32 common_int_sta_2; - u32 common_int_sta_3; - u32 common_int_sta_4; - u8 res7[0x8]; - u32 dp_int_sta; - u32 common_int_mask_1; - u32 common_int_mask_2; - u32 common_int_mask_3; - u32 common_int_mask_4; - u8 res8[0x08]; - u32 int_sta_mask; - u32 int_ctl; - u8 res9[0x200]; - u32 sys_ctl_1; - u32 sys_ctl_2; - u32 sys_ctl_3; - u32 sys_ctl_4; - u32 dp_vid_ctl; - u8 res10[0x2c]; - u32 pkt_send_ctl; - u8 res11[0x4]; - u32 dp_hdcp_ctl; - u8 res12[0x34]; - u32 link_bw_set; - u32 lane_count_set; - u32 dp_training_ptn_set; - u32 ln0_link_trn_ctl; - u32 ln1_link_trn_ctl; - u32 ln2_link_trn_ctl; - u32 ln3_link_trn_ctl; - u32 dp_dn_spread; - u32 dp_hw_link_training; - u8 res13[0x1c]; - u32 dp_debug_ctl; - u32 dp_hpd_deglitch_l; - u32 dp_hpd_deglitch_h; - u8 res14[0x14]; - u32 dp_link_debug_ctl; - u8 res15[0x1c]; - u32 m_vid_0; - u32 m_vid_1; - u32 m_vid_2; - u32 n_vid_0; - u32 n_vid_1; - u32 n_vid_2; - u32 m_vid_mon; - u32 dp_pll_ctl; - u32 dp_phy_pd; - u32 dp_phy_test; - u8 res16[0x8]; - u32 dp_video_fifo_thrd; - u8 res17[0x8]; - u32 dp_audio_margin; - u32 dp_dn_spread_ctl_1; - u32 dp_dn_spread_ctl_2; - u8 res18[0x18]; - u32 dp_m_cal_ctl; - u32 m_vid_gen_filter_th; - u8 res19[0x14]; - u32 m_aud_gen_filter_th; - u32 aux_ch_sta; - u32 aux_err_num; - u32 aux_ch_defer_dtl; - u32 aux_rx_comm; - u32 buf_data_ctl; - u32 aux_ch_ctl_1; - u32 aux_addr_7_0; - u32 aux_addr_15_8; - u32 aux_addr_19_16; - u32 aux_ch_ctl_2; - u8 res20[0x18]; - u32 buf_data_0; - u8 res21[0x3c]; - u32 soc_general_ctl; -}; -/* DP_TX_SW_RESET */ -#define RESET_DP_TX (1 << 0) - -/* DP_FUNC_EN_1 */ -#define MASTER_VID_FUNC_EN_N (1 << 7) -#define SLAVE_VID_FUNC_EN_N (1 << 5) -#define AUD_FIFO_FUNC_EN_N (1 << 4) -#define AUD_FUNC_EN_N (1 << 3) -#define HDCP_FUNC_EN_N (1 << 2) -#define CRC_FUNC_EN_N (1 << 1) -#define SW_FUNC_EN_N (1 << 0) - -/* DP_FUNC_EN_2 */ -#define SSC_FUNC_EN_N (1 << 7) -#define AUX_FUNC_EN_N (1 << 2) -#define SERDES_FIFO_FUNC_EN_N (1 << 1) -#define LS_CLK_DOMAIN_FUNC_EN_N (1 << 0) - -/* DP_VIDEO_CTL_1 */ -#define VIDEO_EN (1 << 7) -#define HDCP_VIDEO_MUTE (1 << 6) - -/* DP_VIDEO_CTL_1 */ -#define IN_D_RANGE_MASK (1 << 7) -#define IN_D_RANGE_SHIFT (7) -#define IN_D_RANGE_CEA (1 << 7) -#define IN_D_RANGE_VESA (0 << 7) -#define IN_BPC_MASK (7 << 4) -#define IN_BPC_SHIFT (4) -#define IN_BPC_12_BITS (3 << 4) -#define IN_BPC_10_BITS (2 << 4) -#define IN_BPC_8_BITS (1 << 4) -#define IN_BPC_6_BITS (0 << 4) -#define IN_COLOR_F_MASK (3 << 0) -#define IN_COLOR_F_SHIFT (0) -#define IN_COLOR_F_YCBCR444 (2 << 0) -#define IN_COLOR_F_YCBCR422 (1 << 0) -#define IN_COLOR_F_RGB (0 << 0) - -/* DP_VIDEO_CTL_3 */ -#define IN_YC_COEFFI_MASK (1 << 7) -#define IN_YC_COEFFI_SHIFT (7) -#define IN_YC_COEFFI_ITU709 (1 << 7) -#define IN_YC_COEFFI_ITU601 (0 << 7) -#define VID_CHK_UPDATE_TYPE_MASK (1 << 4) -#define VID_CHK_UPDATE_TYPE_SHIFT (4) -#define VID_CHK_UPDATE_TYPE_1 (1 << 4) -#define VID_CHK_UPDATE_TYPE_0 (0 << 4) - -/* DP_VIDEO_CTL_10 */ -#define FORMAT_SEL (1 << 4) -#define INTERACE_SCAN_CFG (1 << 2) -#define VSYNC_POLARITY_CFG (1 << 1) -#define HSYNC_POLARITY_CFG (1 << 0) - -/* DP_LANE_MAP */ -#define LANE3_MAP_LOGIC_LANE_0 (0 << 6) -#define LANE3_MAP_LOGIC_LANE_1 (1 << 6) -#define LANE3_MAP_LOGIC_LANE_2 (2 << 6) -#define LANE3_MAP_LOGIC_LANE_3 (3 << 6) -#define LANE2_MAP_LOGIC_LANE_0 (0 << 4) -#define LANE2_MAP_LOGIC_LANE_1 (1 << 4) -#define LANE2_MAP_LOGIC_LANE_2 (2 << 4) -#define LANE2_MAP_LOGIC_LANE_3 (3 << 4) -#define LANE1_MAP_LOGIC_LANE_0 (0 << 2) -#define LANE1_MAP_LOGIC_LANE_1 (1 << 2) -#define LANE1_MAP_LOGIC_LANE_2 (2 << 2) -#define LANE1_MAP_LOGIC_LANE_3 (3 << 2) -#define LANE0_MAP_LOGIC_LANE_0 (0 << 0) -#define LANE0_MAP_LOGIC_LANE_1 (1 << 0) -#define LANE0_MAP_LOGIC_LANE_2 (2 << 0) -#define LANE0_MAP_LOGIC_LANE_3 (3 << 0) - -/* DP_AUX_HW_RETRY_CTL */ -#define AUX_BIT_PERIOD_SHIFT 8 -#define AUX_BIT_PERIOD_MASK 7 - -#define AUX_HW_RETRY_INTERVAL_SHIFT 3 -#define AUX_HW_RETRY_INTERVAL_600_US 0 -#define AUX_HW_RETRY_INTERVAL_800_US 1 -#define AUX_HW_RETRY_INTERVAL_1000_US 2 -#define AUX_HW_RETRY_INTERVAL_1800_US 3 -#define AUX_HW_RETRY_COUNT_SHIFT 0 -#define AUX_HW_RETRY_COUNT_MASK 7 - -/* DP_COMMON_INT_STA_1 */ -#define VSYNC_DET (1 << 7) -#define PLL_LOCK_CHG (1 << 6) -#define SPDIF_ERR (1 << 5) -#define SPDIF_UNSTBL (1 << 4) -#define VID_FORMAT_CHG (1 << 3) -#define AUD_CLK_CHG (1 << 2) -#define VID_CLK_CHG (1 << 1) -#define SW_INT (1 << 0) - -/* DP_COMMON_INT_STA_2 */ -#define ENC_EN_CHG (1 << 6) -#define HW_BKSV_RDY (1 << 3) -#define HW_SHA_DONE (1 << 2) -#define HW_AUTH_STATE_CHG (1 << 1) -#define HW_AUTH_DONE (1 << 0) - -/* DP_COMMON_INT_STA_3 */ -#define AFIFO_UNDER (1 << 7) -#define AFIFO_OVER (1 << 6) -#define R0_CHK_FLAG (1 << 5) - -/* DP_COMMON_INT_STA_4 */ -#define PSR_ACTIVE (1 << 7) -#define PSR_INACTIVE (1 << 6) -#define SPDIF_BI_PHASE_ERR (1 << 5) -#define HOTPLUG_CHG (1 << 2) -#define HPD_LOST (1 << 1) -#define PLUG (1 << 0) - -/* DP_INT_STA */ -#define INT_HPD (1 << 6) -#define HW_TRAINING_FINISH (1 << 5) -#define RPLY_RECEIV (1 << 1) -#define AUX_ERR (1 << 0) - -/* DP_INT_CTL */ -#define INT_POL0 (1 << 0) -#define INT_POL1 (1 << 1) -#define SOFT_INT_CTRL (1 << 2) - -/* DP_SYS_CTL_1 */ -#define DET_STA (1 << 2) -#define FORCE_DET (1 << 1) -#define DET_CTRL (1 << 0) - -/* DP_SYS_CTL_2 */ -#define CHA_CRI_SHIFT 4 -#define CHA_CRI_MASK 0xf -#define CHA_STA (1 << 2) -#define FORCE_CHA (1 << 1) -#define CHA_CTRL (1 << 0) - -/* DP_SYS_CTL_3 */ -#define HPD_STATUS (1 << 6) -#define F_HPD (1 << 5) -#define HPD_CTRL (1 << 4) -#define HDCP_RDY (1 << 3) -#define STRM_VALID (1 << 2) -#define F_VALID (1 << 1) -#define VALID_CTRL (1 << 0) - -/* DP_SYS_CTL_4 */ -#define FIX_M_AUD (1 << 4) -#define ENHANCED (1 << 3) -#define FIX_M_VID (1 << 2) -#define M_VID_UPDATE_CTRL (3 << 0) - -/* DP_TRAINING_PTN_SET */ -#define SCRAMBLER_TYPE (1 << 9) -#define HW_LINK_TRAINING_PATTERN (1 << 8) -#define SCRAMBLING_DISABLE (1 << 5) -#define SCRAMBLING_ENABLE (0 << 5) -#define LINK_QUAL_PATTERN_SET_MASK (3 << 2) -#define LINK_QUAL_PATTERN_SET_PRBS7 (3 << 2) -#define LINK_QUAL_PATTERN_SET_D10_2 (1 << 2) -#define LINK_QUAL_PATTERN_SET_DISABLE (0 << 2) -#define SW_TRAINING_PATTERN_SET_MASK (3 << 0) -#define SW_TRAINING_PATTERN_SET_PTN2 (2 << 0) -#define SW_TRAINING_PATTERN_SET_PTN1 (1 << 0) -#define SW_TRAINING_PATTERN_SET_NORMAL (0 << 0) - -/* DP_LN0_LINK_TRAINING_CTL */ -#define PRE_EMPHASIS_SET_SHIFT (3) - -/* DP_DEBUG_CTL */ -#define PLL_LOCK (1 << 4) -#define F_PLL_LOCK (1 << 3) -#define PLL_LOCK_CTRL (1 << 2) -#define PN_INV (1 << 0) - -/* DP_M_VID */ -#define M_VID_0_VALUE_SHIFT 0 -#define M_VID_1_VALUE_SHIFT 8 -#define M_VID_2_VALUE_SHIFT 16 - -/* DP_M_VID */ -#define N_VID_0_VALUE_SHIFT 0 -#define N_VID_1_VALUE_SHIFT 8 -#define N_VID_2_VALUE_SHIFT 16 - -/* DP_PLL_CTL */ -#define DP_PLL_PD (1 << 7) -#define DP_PLL_RESET (1 << 6) -#define DP_PLL_LOOP_BIT_DEFAULT (1 << 4) -#define DP_PLL_REF_BIT_1_1250V (5 << 0) -#define DP_PLL_REF_BIT_1_2500V (7 << 0) - -/* DP_PHY_PD */ -#define DP_PHY_PD (1 << 5) -#define AUX_PD (1 << 4) -#define CH3_PD (1 << 3) -#define CH2_PD (1 << 2) -#define CH1_PD (1 << 1) -#define CH0_PD (1 << 0) - -/* DP_PHY_TEST */ -#define MACRO_RST (1 << 5) -#define CH1_TEST (1 << 1) -#define CH0_TEST (1 << 0) - -/* DP_AUX_CH_STA */ -#define AUX_BUSY (1 << 4) -#define AUX_STATUS_MASK (0xf << 0) - -/* DP_AUX_CH_DEFER_CTL */ -#define DEFER_CTRL_EN (1 << 7) -#define DEFER_COUNT_SHIFT 0 -#define DEFER_COUNT_MASK 0x7f - -/* DP_AUX_RX_COMM */ -#define AUX_RX_COMM_I2C_DEFER (2 << 2) -#define AUX_RX_COMM_AUX_DEFER (2 << 0) - -/* DP_BUFFER_DATA_CTL */ -#define BUF_CLR (1 << 7) - -/* Maximum number of tries for Aux Transaction */ -#define MAX_AUX_RETRY_COUNT 10 - -/* DP_AUX_CH_CTL_1 */ -#define AUX_LENGTH_SHIFT 4 -#define AUX_LENGTH_MASK 0xf - -#define AUX_TX_COMM_MASK (0xf << 0) -#define AUX_TX_COMM_DP_TRANSACTION (1 << 3) -#define AUX_TX_COMM_I2C_TRANSACTION (0 << 3) -#define AUX_TX_COMM_MOT (1 << 2) -#define AUX_TX_COMM_WRITE (0 << 0) -#define AUX_TX_COMM_READ (1 << 0) - -/* DP_AUX_ADDR_7_0 */ -#define AUX_ADDR_7_0_SHIFT 0 -#define AUX_ADDR_7_0_MASK 0xff - -/* DP_AUX_ADDR_15_8 */ -#define AUX_ADDR_15_8_SHIFT 8 -#define AUX_ADDR_15_8_MASK 0xff - -/* DP_AUX_ADDR_19_16 */ -#define AUX_ADDR_19_16_SHIFT 16 -#define AUX_ADDR_19_16_MASK 0x0f - -/* DP_AUX_CH_CTL_2 */ -#define ADDR_ONLY (1 << 1) -#define AUX_EN (1 << 0) - -/* DP_SOC_GENERAL_CTL */ -#define AUDIO_MODE_SPDIF_MODE (1 << 8) -#define AUDIO_MODE_MASTER_MODE (0 << 8) -#define MASTER_VIDEO_INTERLACE_EN (1 << 4) -#define VIDEO_MASTER_CLK_SEL (1 << 2) -#define VIDEO_MASTER_MODE_EN (1 << 1) -#define VIDEO_MODE_MASK (1 << 0) -#define VIDEO_MODE_SLAVE_MODE (1 << 0) -#define VIDEO_MODE_MASTER_MODE (0 << 0) - -#define HW_TRAINING_ERROR_CODE (7<<4) -#define HW_TRAINING_EN (1<<0) - -/* I2C EDID Chip ID, Slave Address */ -#define I2C_EDID_DEVICE_ADDR 0x50 -#define I2C_E_EDID_DEVICE_ADDR 0x30 - -#define EDID_BLOCK_LENGTH 0x80 -#define EDID_HEADER_PATTERN 0x00 -#define EDID_EXTENSION_FLAG 0x7e -#define EDID_CHECKSUM 0x7f - -/* Definition for DPCD Register */ -#define DPCD_ADDR_DPCD_REV 0x0000 -#define DPCD_ADDR_MAX_LINK_RATE 0x0001 -#define DPCD_ADDR_MAX_LANE_COUNT 0x0002 -#define DPCD_ADDR_LINK_BW_SET 0x0100 -#define DPCD_ADDR_LANE_COUNT_SET 0x0101 -#define DPCD_ADDR_TRAINING_PATTERN_SET 0x0102 -#define DPCD_ADDR_TRAINING_LANE0_SET 0x0103 -#define DPCD_ADDR_LANE0_1_STATUS 0x0202 -#define DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED 0x0204 -#define DPCD_ADDR_ADJUST_REQUEST_LANE0_1 0x0206 -#define DPCD_ADDR_ADJUST_REQUEST_LANE2_3 0x0207 -#define DPCD_ADDR_TEST_REQUEST 0x0218 -#define DPCD_ADDR_TEST_RESPONSE 0x0260 -#define DPCD_ADDR_TEST_EDID_CHECKSUM 0x0261 -#define DPCD_ADDR_SINK_POWER_STATE 0x0600 - -/* DPCD_ADDR_MAX_LANE_COUNT */ -#define DPCD_MAX_LANE_COUNT_MASK 0x1f - -/* DPCD_ADDR_LANE_COUNT_SET */ -#define DPCD_ENHANCED_FRAME_EN (1 << 7) -#define DPCD_LANE_COUNT_SET_MASK 0x1f - -/* DPCD_ADDR_TRAINING_PATTERN_SET */ -#define DPCD_SCRAMBLING_DISABLED (1 << 5) -#define DPCD_SCRAMBLING_ENABLED (0 << 5) -#define DPCD_TRAINING_PATTERN_2 (2 << 0) -#define DPCD_TRAINING_PATTERN_1 (1 << 0) -#define DPCD_TRAINING_PATTERN_DISABLED (0 << 0) - -/* DPCD_ADDR_LANE0_1_STATUS */ -#define DPCD_LANE_SYMBOL_LOCKED (1 << 2) -#define DPCD_LANE_CHANNEL_EQ_DONE (1 << 1) -#define DPCD_LANE_CR_DONE (1 << 0) -#define DPCD_CHANNEL_EQ_BITS (DPCD_LANE_CR_DONE | \ - DPCD_LANE_CHANNEL_EQ_DONE | \ - DPCD_LANE_SYMBOL_LOCKED) - -/* DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED */ -#define DPCD_LINK_STATUS_UPDATED (1 << 7) -#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6) -#define DPCD_INTERLANE_ALIGN_DONE (1 << 0) - -/* DPCD_ADDR_TEST_REQUEST */ -#define DPCD_TEST_EDID_READ (1 << 2) - -/* DPCD_ADDR_TEST_RESPONSE */ -#define DPCD_TEST_EDID_CHECKSUM_WRITE (1 << 2) - -/* DPCD_ADDR_SINK_POWER_STATE */ -#define DPCD_SET_POWER_STATE_D0 (1 << 0) -#define DPCD_SET_POWER_STATE_D4 (2 << 0) - -/* Allow DP Gating clock and set FIMD source to 267 Mhz for DP */ -void clock_init_dp_clock(void); - -/** - * Perform the next stage of the LCD init if it is time to do so. - * - * LCD init can be time-consuming because of the number of delays we need - * while waiting for the backlight power supply, etc. This function can - * be called at various times during U-Boot operation to advance the - * initialization of the LCD to the next stage if sufficient time has - * passed since the last stage. It keeps track of what stage it is up to - * and the time that it is permitted to move to the next stage. - * - * The final call should have can_block=1 to complete the init. - * - * @param blob fdt blob containing LCD information - * @param can_block 1 to wait until all init is complete, and then return - * 0 to return immediately, potentially doing nothing if it - * is not yet time for the next init. - */ -int exynos_lcd_check_next_stage(const void *blob, int can_block); -#endif diff --git a/src/cpu/samsung/exynos5250/sata.c b/src/cpu/samsung/exynos5250/sata.c deleted file mode 100644 index d32c612..0000000 --- a/src/cpu/samsung/exynos5250/sata.c +++ /dev/null @@ -1,431 +0,0 @@ -/* - * Copyright (c) 2012 The Chromium OS Authors. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <ahci.h> -#include <common.h> -#include <fdtdec.h> -#include <scsi.h> -#include <asm/arch-exynos5/sata.h> -#include <asm/arch/pinmux.h> -#include <asm/errno.h> -#include <asm/gpio.h> -#include <asm/types.h> - -#define SATA_AHCI_AXI 0x122f0000 -#define SATA_PHCTRL_APB 0x12170000 -#define SATA_PHY_I2C_ABP 0x121d0000 -#define EXYNOS5_SATA_PHY_CONTROL (0x10040000 + 0x724) -#define S5P_PMU_SATA_PHY_CONTROL_EN 0x1 - -void * const phy_ctrl = (void *)SATA_PHCTRL_APB; -void * const phy_i2c_base = (void *)SATA_PHY_I2C_ABP; - -typedef unsigned char bool; -#define true 1 -#define false 0 - - -#define SATA_TIME_LIMIT 10000 -#define SATA_PHY_I2C_SLAVE_ADDRS 0x70 - -#define SATA_RESET 0x4 -#define RESET_CMN_RST_N (1 << 1) -#define LINK_RESET 0xF0000 - -#define SATA_MODE0 0x10 - -#define SATA_CTRL0 0x14 -#define CTRL0_P0_PHY_CALIBRATED_SEL (1 << 9) -#define CTRL0_P0_PHY_CALIBRATED (1 << 8) - -#define SATA_PHSATA_CTRLM 0xE0 -#define PHCTRLM_REF_RATE (1 << 1) -#define PHCTRLM_HIGH_SPEED (1 << 0) - -#define SATA_PHSATA_STATM 0xF0 -#define PHSTATM_PLL_LOCKED (1 << 0) - - -/********************** I2C**************/ -#define SATA_I2C_CON 0x00 -#define SATA_I2C_STAT 0x04 -#define SATA_I2C_ADDR 0x08 -#define SATA_I2C_DS 0x0C -#define SATA_I2C_LC 0x10 - -/* I2CCON reg */ -#define CON_ACKEN (1 << 7) -#define CON_CLK512 (1 << 6) -#define CON_CLK16 (~CON_CLK512) -#define CON_INTEN (1 << 5) -#define CON_INTPND (1 << 4) -#define CON_TXCLK_PS (0xF) - -/* I2CSTAT reg */ -#define STAT_MSTT (0x3 << 6) -#define STAT_BSYST (1 << 5) -#define STAT_RTEN (1 << 4) -#define STAT_LAST (1 << 0) - -#define LC_FLTR_EN (1 << 2) - -#define SATA_PHY_CON_RESET 0xF003F - -#define SCLK_SATA_FREQ (66 * MHZ) - - - -enum { - SATA_GENERATION1, - SATA_GENERATION2, - SATA_GENERATION3, -}; - -static bool sata_is_reg(void __iomem *base, u32 reg, u32 checkbit, u32 Status) -{ - if ((__raw_readl(base + reg) & checkbit) == Status) - return true; - else - return false; -} - -static bool wait_for_reg_status(void __iomem *base, u32 reg, u32 checkbit, - u32 Status) -{ - u32 time_limit_cnt = 0; - while (!sata_is_reg(base, reg, checkbit, Status)) { - if (time_limit_cnt == SATA_TIME_LIMIT) { - return false; - } - udelay(1000); - time_limit_cnt++; - } - return true; -} - - -static void sata_set_gen(u8 gen) -{ - __raw_writel(gen, phy_ctrl + SATA_MODE0); -} - -/* Address :I2C Address */ -static void sata_i2c_write_addrs(u8 data) -{ - __raw_writeb((data & 0xFE), phy_i2c_base + SATA_I2C_DS); -} - -static void sata_i2c_write_data(u8 data) -{ - __raw_writeb((data), phy_i2c_base + SATA_I2C_DS); -} - -static void sata_i2c_start(void) -{ - u32 val; - val = __raw_readl(phy_i2c_base + SATA_I2C_STAT); - val |= STAT_BSYST; - __raw_writel(val, phy_i2c_base + SATA_I2C_STAT); -} - -static void sata_i2c_stop(void) -{ - u32 val; - val = __raw_readl(phy_i2c_base + SATA_I2C_STAT); - val &= ~STAT_BSYST; - __raw_writel(val, phy_i2c_base + SATA_I2C_STAT); -} - -static bool sata_i2c_get_int_status(void) -{ - if ((__raw_readl(phy_i2c_base + SATA_I2C_CON)) & CON_INTPND) - return true; - else - return false; -} - -static bool sata_i2c_is_tx_ack(void) -{ - if ((__raw_readl(phy_i2c_base + SATA_I2C_STAT)) & STAT_LAST) - return false; - else - return true; -} - -static bool sata_i2c_is_bus_ready(void) -{ - if ((__raw_readl(phy_i2c_base + SATA_I2C_STAT)) & STAT_BSYST) - return false; - else - return true; -} - -static bool sata_i2c_wait_for_busready(u32 time_out) -{ - while (--time_out) { - if (sata_i2c_is_bus_ready()) - return true; - udelay(100); - } - return false; -} - -static bool sata_i2c_wait_for_tx_ack(u32 time_out) -{ - while (--time_out) { - if (sata_i2c_get_int_status()) { - if (sata_i2c_is_tx_ack()) - return true; - } - udelay(100); - } - return false; -} - -static void sata_i2c_clear_int_status(void) -{ - u32 val; - val = __raw_readl(phy_i2c_base + SATA_I2C_CON); - val &= ~CON_INTPND; - __raw_writel(val, phy_i2c_base + SATA_I2C_CON); -} - - -static void sata_i2c_set_ack_gen(bool enable) -{ - u32 val; - if (enable) { - val = (__raw_readl(phy_i2c_base + SATA_I2C_CON)) | CON_ACKEN; - __raw_writel(val, phy_i2c_base + SATA_I2C_CON); - } else { - val = __raw_readl(phy_i2c_base + SATA_I2C_CON); - val &= ~CON_ACKEN; - __raw_writel(val, phy_i2c_base + SATA_I2C_CON); - } - -} - -static void sata_i2c_set_master_tx(void) -{ - u32 val; - /* Disable I2C */ - val = __raw_readl(phy_i2c_base + SATA_I2C_STAT); - val &= ~STAT_RTEN; - __raw_writel(val, phy_i2c_base + SATA_I2C_STAT); - /* Clear Mode */ - val = __raw_readl(phy_i2c_base + SATA_I2C_STAT); - val &= ~STAT_MSTT; - __raw_writel(val, phy_i2c_base + SATA_I2C_STAT); - - sata_i2c_clear_int_status(); - /* interrupt disable */ - val = __raw_readl(phy_i2c_base + SATA_I2C_CON); - val &= ~CON_INTEN; - __raw_writel(val, phy_i2c_base + SATA_I2C_CON); - - /* Master, Send mode */ - val = __raw_readl(phy_i2c_base + SATA_I2C_STAT); - val |= STAT_MSTT; - __raw_writel(val, phy_i2c_base + SATA_I2C_STAT); - - /* interrupt enable */ - val = __raw_readl(phy_i2c_base + SATA_I2C_CON); - val |= CON_INTEN; - __raw_writel(val, phy_i2c_base + SATA_I2C_CON); - - /* Enable I2C */ - val = __raw_readl(phy_i2c_base + SATA_I2C_STAT); - val |= STAT_RTEN; - __raw_writel(val, phy_i2c_base + SATA_I2C_STAT); -} - -static void sata_i2c_init(void) -{ - u32 val; - - val = __raw_readl(phy_i2c_base + SATA_I2C_CON); - val &= CON_CLK16; - __raw_writel(val, phy_i2c_base + SATA_I2C_CON); - - val = __raw_readl(phy_i2c_base + SATA_I2C_CON); - val &= ~(CON_TXCLK_PS); - __raw_writel(val, phy_i2c_base + SATA_I2C_CON); - - val = __raw_readl(phy_i2c_base + SATA_I2C_CON); - val |= (2 & CON_TXCLK_PS); - __raw_writel(val, phy_i2c_base + SATA_I2C_CON); - - val = __raw_readl(phy_i2c_base + SATA_I2C_LC); - val &= ~(LC_FLTR_EN); - __raw_writel(val, phy_i2c_base + SATA_I2C_LC); - - sata_i2c_set_ack_gen(false); -} -static bool sata_i2c_send(u8 slave_addrs, u8 addrs, u8 ucData) -{ - s32 ret = 0; - if (!sata_i2c_wait_for_busready(SATA_TIME_LIMIT)) - return false; - - sata_i2c_init(); - sata_i2c_set_master_tx(); - - __raw_writel(SATA_PHY_CON_RESET, phy_ctrl + SATA_RESET); - sata_i2c_write_addrs(slave_addrs); - sata_i2c_start(); - if (!sata_i2c_wait_for_tx_ack(SATA_TIME_LIMIT)) { - ret = false; - goto STOP; - } - sata_i2c_write_data(addrs); - sata_i2c_clear_int_status(); - if (!sata_i2c_wait_for_tx_ack(SATA_TIME_LIMIT)) { - ret = false; - goto STOP; - } - sata_i2c_write_data(ucData); - sata_i2c_clear_int_status(); - if (!sata_i2c_wait_for_tx_ack(SATA_TIME_LIMIT)) { - ret = false; - goto STOP; - } - ret = true; - -STOP: - sata_i2c_stop(); - sata_i2c_clear_int_status(); - sata_i2c_wait_for_busready(SATA_TIME_LIMIT); - - return ret; -} - -static bool ahci_phy_init(void __iomem *mmio) -{ - u8 uCount, i = 0; - /* 0x3A for 40bit I/F */ - u8 reg_addrs[] = {0x22, 0x21, 0x3A}; - /* 0x0B for 40bit I/F */ - u8 default_setting_value[] = {0x30, 0x4f, 0x0B}; - - uCount = sizeof(reg_addrs)/sizeof(u8); - while (i < uCount) { - if (!sata_i2c_send(SATA_PHY_I2C_SLAVE_ADDRS, reg_addrs[i], - default_setting_value[i])) - return false; - i++; - } - return true; -} - -static int exynos5_ahci_init(void __iomem *mmio) -{ - int val, ret; - - __raw_writel(S5P_PMU_SATA_PHY_CONTROL_EN, EXYNOS5_SATA_PHY_CONTROL); - - val = 0; - __raw_writel(val, phy_ctrl + SATA_RESET); - val = __raw_readl(phy_ctrl + SATA_RESET); - val |= 0x3D; - __raw_writel(val, phy_ctrl + SATA_RESET); - - val = __raw_readl(phy_ctrl + SATA_RESET); - val |= LINK_RESET; - __raw_writel(val, phy_ctrl + SATA_RESET); - - val = __raw_readl(phy_ctrl + SATA_RESET); - val |= RESET_CMN_RST_N; - __raw_writel(val, phy_ctrl + SATA_RESET); - - val = __raw_readl(phy_ctrl + SATA_PHSATA_CTRLM); - val &= ~PHCTRLM_REF_RATE; - __raw_writel(val, phy_ctrl + SATA_PHSATA_CTRLM); - - /* High speed enable for Gen3 */ - val = __raw_readl(phy_ctrl + SATA_PHSATA_CTRLM); - val |= PHCTRLM_HIGH_SPEED; - __raw_writel(val, phy_ctrl + SATA_PHSATA_CTRLM); - - /* Port0 is available */ - __raw_writel(0x1, mmio + HOST_PORTS_IMPL); - - ret = ahci_phy_init(mmio); - - val = __raw_readl(phy_ctrl + SATA_CTRL0); - val |= CTRL0_P0_PHY_CALIBRATED_SEL|CTRL0_P0_PHY_CALIBRATED; - __raw_writel(val, phy_ctrl + SATA_CTRL0); - sata_set_gen(SATA_GENERATION3); - - /* release cmu reset */ - val = __raw_readl(phy_ctrl + SATA_RESET); - val &= ~RESET_CMN_RST_N; - __raw_writel(val, phy_ctrl + SATA_RESET); - - val = __raw_readl(phy_ctrl + SATA_RESET); - val |= RESET_CMN_RST_N; - __raw_writel(val, phy_ctrl + SATA_RESET); - - if (wait_for_reg_status(phy_ctrl, SATA_PHSATA_STATM, - PHSTATM_PLL_LOCKED, 1)) { - return ret; - } - return 0; -} - -static int exynos5_sata_enable_power(const void *blob) -{ - int node; - struct fdt_gpio_state gpio; - - node = fdtdec_next_compatible(blob, 0, COMPAT_GOOGLE_SATA); - if (node >= 0 && - fdtdec_decode_gpio(blob, node, "enable-gpios", &gpio) == 0) { - gpio_cfg_pin(gpio.gpio, EXYNOS_GPIO_OUTPUT); - gpio_set_value(gpio.gpio, 1); - return 0; - } - return -ENODEV; -} - -static void exynos5_enable_clock_gates(void) -{ - /* Turn on all SATA clock gates & DMA gates. */ - const unsigned cmu_toppart = 0x10020000; - const unsigned addr = cmu_toppart + 0x944; - const unsigned sata_clocks = (1 << 25) | (1 << 24) | (1 << 6); - const unsigned dma_clocks = (2 << 1) | (1 << 1); - const unsigned clk_gate_ip_fsys = readl(addr); - writel(clk_gate_ip_fsys | sata_clocks | dma_clocks, addr); -} - -int exynos5_sata_init(const void *blob) -{ - if (exynos5_sata_enable_power(blob) == 0) { - exynos5_enable_clock_gates(); - - if (exynos5_ahci_init((void *)SATA_AHCI_AXI)) { - ahci_init(SATA_AHCI_AXI); - scsi_scan(1); - return 0; - } - } - return -ENODEV; -} diff --git a/src/cpu/samsung/exynos5250/sata.h b/src/cpu/samsung/exynos5250/sata.h deleted file mode 100644 index 912228e..0000000 --- a/src/cpu/samsung/exynos5250/sata.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (c) 2012 The Chromium OS Authors. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef __EXYNOS5_SATA_H -#define __EXYNOS5_SATA_H - -int exynos5_sata_init(const void *blob); -#endif - diff --git a/src/cpu/samsung/exynos5250/setup.h b/src/cpu/samsung/exynos5250/setup.h index f205b4d..942a3f1 100644 --- a/src/cpu/samsung/exynos5250/setup.h +++ b/src/cpu/samsung/exynos5250/setup.h @@ -1,15 +1,11 @@ /* - * Machine Specific Values for SMDK5250 board based on Exynos5 + * This file is part of the coreboot project. * * Copyright (C) 2012 Samsung Electronics * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -18,12 +14,13 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#ifndef _SMDK5250_SETUP_H -#define _SMDK5250_SETUP_H +/* Machine Specific Values for SMDK5250 board based on Exynos5 */ + +#ifndef CPU_SAMSUNG_EXYNOS5250_SETUP_H +#define CPU_SAMSUNG_EXYNOS5250_SETUP_H
struct exynos5_dmc; enum ddr_mode; @@ -687,8 +684,6 @@ enum { };
/* Functions common between LPDDR2 and DDR3 */ -/* FIXME(dhendrix): conflicts with arch system.h version of sdelay()... */ -//void sdelay(unsigned long);
/* CPU info initialization code */ void cpu_info_init(void); @@ -708,7 +703,6 @@ void mem_ctrl_init(void); int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size, int mem_reset);
-void tzpc_init(void); /* * Configure ZQ I/O interface * diff --git a/src/cpu/samsung/exynos5250/soc.c b/src/cpu/samsung/exynos5250/soc.c deleted file mode 100644 index be28d8c..0000000 --- a/src/cpu/samsung/exynos5250/soc.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <cpu/samsung/exynos5250/cpu.h> -#include <cpu/samsung/exynos5250/periph.h> - -#include <cpu/samsung/exynos5250/uart.h> - -enum periph_id exynos5_get_periph_id(unsigned base_addr) -{ - enum periph_id id = PERIPH_ID_NONE; - - switch (base_addr) { - case EXYNOS5_UART0_BASE: - id = PERIPH_ID_UART0; - break; - case EXYNOS5_UART1_BASE: - id = PERIPH_ID_UART1; - break; - case EXYNOS5_UART2_BASE: - id = PERIPH_ID_UART2; - break; - case EXYNOS5_UART3_BASE: - id = PERIPH_ID_UART3; - break; - default: - break; - } - - return id; -} diff --git a/src/cpu/samsung/exynos5250/spi.c b/src/cpu/samsung/exynos5250/spi.c index 33f4d99..503cee9 100644 --- a/src/cpu/samsung/exynos5250/spi.c +++ b/src/cpu/samsung/exynos5250/spi.c @@ -1,14 +1,12 @@ /* - * Copyright (C) 2011 Samsung Electronics - * Copyright (C) 2013 The Chromium OS Authors. All rights reserved. + * This file is part of the coreboot project. * - * See file CREDITS for list of people who contributed to this - * project. + * Copyright (C) 2011 Samsung Electronics + * Copyright 2013 Google Inc. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -17,18 +15,15 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#include <stdlib.h> - -#include <common.h> #include <console/console.h> - -#include <cpu/samsung/exynos5250/gpio.h> -#include <cpu/samsung/exynos5250/clk.h> - +#include <arch/io.h> +#include <stdlib.h> +#include <assert.h> +#include "gpio.h" +#include "clk.h" #include "spi.h"
#define OM_STAT (0x1f << 1) @@ -49,7 +44,7 @@ static void exynos_spi_rx_tx(struct exynos_spi *regs, int todo,
// TODO In currrent implementation, every read/write must be aligned to // 4 bytes, otherwise you may get timeout or other unexpected results. - assert(todo % 4 == 0); + ASSERT(todo % 4 == 0);
out_bytes = in_bytes = todo; setbits_le32(®s->ch_cfg, SPI_CH_RST); diff --git a/src/cpu/samsung/exynos5250/spi.h b/src/cpu/samsung/exynos5250/spi.h index 3892917..7ca3114 100644 --- a/src/cpu/samsung/exynos5250/spi.h +++ b/src/cpu/samsung/exynos5250/spi.h @@ -1,11 +1,11 @@ /* - * (C) Copyright 2012 SAMSUNG Electronics - * Padmavathi Venna padma.v@samsung.com + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Samsung Electronics * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -14,17 +14,15 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#ifndef __ASM_ARCH_EXYNOS_COMMON_SPI_H_ -#define __ASM_ARCH_EXYNOS_COMMON_SPI_H_ +#ifndef CPU_SAMSUNG_EXYNOS5250_SPI_H +#define CPU_SAMSUNG_EXYNOS5250_SPI_H
-// This driver serves as a CBFS media source. +/* This driver serves as a CBFS media source. */ #include <cbfs.h>
-#ifndef __ASSEMBLER__ - /* SPI peripheral register map; padded to 64KB */ struct exynos_spi { unsigned int ch_cfg; /* 0x00 */ @@ -93,11 +91,8 @@ int exynos_spi_open(struct exynos_spi *regs); int exynos_spi_read(struct exynos_spi *regs, void *dest, u32 len, u32 off); int exynos_spi_close(struct exynos_spi *regs);
-/* Serve as CBFS Media */ +/* Serve as CBFS media source */ int initialize_exynos_spi_cbfs_media(struct cbfs_media *media, void *buffer_address, size_t buffer_size); - -#endif /* __ASSEMBLER__ */ - #endif diff --git a/src/cpu/samsung/exynos5250/sromc.c b/src/cpu/samsung/exynos5250/sromc.c deleted file mode 100644 index 7bc93e7..0000000 --- a/src/cpu/samsung/exynos5250/sromc.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics - * Naveen Krishna Ch ch.naveen@samsung.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sromc.h> - -/* - * s5p_config_sromc() - select the proper SROMC Bank and configure the - * band width control and bank control registers - * srom_bank - SROM - * srom_bw_conf - SMC Band witdh reg configuration value - * srom_bc_conf - SMC Bank Control reg configuration value - */ -void s5p_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf) -{ - u32 tmp; - struct s5p_sromc *srom = - samsung_get_base_sromc(); - - /* Configure SMC_BW register to handle proper SROMC bank */ - tmp = srom->bw; - tmp &= ~(0xF << (srom_bank * 4)); - tmp |= srom_bw_conf; - srom->bw = tmp; - - /* Configure SMC_BC register */ - srom->bc[srom_bank] = srom_bc_conf; -} diff --git a/src/cpu/samsung/exynos5250/sromc.h b/src/cpu/samsung/exynos5250/sromc.h deleted file mode 100644 index d4fdae9..0000000 --- a/src/cpu/samsung/exynos5250/sromc.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * (C) Copyright 2010 Samsung Electronics - * Naveen Krishna Ch ch.naveen@samsung.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Note: This file contains the register description for SROMC - * - */ - -#ifndef __ASM_ARCH_COMMON_SROMC_H_ -#define __ASM_ARCH_COMMON_SROMC_H_ - -#define SROMC_DATA16_WIDTH(x) (1<<((x*4)+0)) -#define SROMC_BYTE_ADDR_MODE(x) (1<<((x*4)+1)) /* 0-> Half-word base address*/ - /* 1-> Byte base address*/ -#define SROMC_WAIT_ENABLE(x) (1<<((x*4)+2)) -#define SROMC_BYTE_ENABLE(x) (1<<((x*4)+3)) - -#define SROMC_BC_TACS(x) (x << 28) /* address set-up */ -#define SROMC_BC_TCOS(x) (x << 24) /* chip selection set-up */ -#define SROMC_BC_TACC(x) (x << 16) /* access cycle */ -#define SROMC_BC_TCOH(x) (x << 12) /* chip selection hold */ -#define SROMC_BC_TAH(x) (x << 8) /* address holding time */ -#define SROMC_BC_TACP(x) (x << 4) /* page mode access cycle */ -#define SROMC_BC_PMC(x) (x << 0) /* normal(1data)page mode configuration */ - -#ifndef __ASSEMBLER__ -struct s5p_sromc { - unsigned int bw; - unsigned int bc[4]; -}; -#endif /* __ASSEMBLER__ */ - -/* Configure the Band Width and Bank Control Regs for required SROMC Bank */ -void s5p_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf); - -enum { - FDT_SROM_PMC, - FDT_SROM_TACP, - FDT_SROM_TAH, - FDT_SROM_TCOH, - FDT_SROM_TACC, - FDT_SROM_TCOS, - FDT_SROM_TACS, - - FDT_SROM_TIMING_COUNT, -}; - -struct fdt_sromc { - u8 bank; /* srom bank number */ - u8 width; /* bus width in bytes */ - unsigned int timing[FDT_SROM_TIMING_COUNT]; /* timing parameters */ -}; - -#endif /* __ASM_ARCH_COMMON_SROMC_H_ */ diff --git a/src/cpu/samsung/exynos5250/sysreg.h b/src/cpu/samsung/exynos5250/sysreg.h index f081495..570ee6c 100644 --- a/src/cpu/samsung/exynos5250/sysreg.h +++ b/src/cpu/samsung/exynos5250/sysreg.h @@ -1,11 +1,11 @@ /* - * (C) Copyright 2012 Samsung Electronics - * Register map for Exynos5 sysreg + * This file is part of the coreboot project. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -14,12 +14,13 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#ifndef __EXYNOS5_SYSREG_H__ -#define __EXYNOS5_SYSREG_H__ +/* Register map for Exynos5 sysreg */ + +#ifndef CPU_SAMSUNG_EXYNOS5250_SYSREG_H +#define CPU_SAMSUNG_EXYNOS5250_SYSREG_H
/* sysreg map */ struct exynos5_sysreg { diff --git a/src/cpu/samsung/exynos5250/timer.c b/src/cpu/samsung/exynos5250/timer.c index e7cadc3..405effa 100644 --- a/src/cpu/samsung/exynos5250/timer.c +++ b/src/cpu/samsung/exynos5250/timer.c @@ -1,16 +1,11 @@ /* - * Copyright (C) 2009 Samsung Electronics - * Heungjun Kim riverful.kim@samsung.com - * Inki Dae inki.dae@samsung.com - * Minkyu Kang mk7.kang@samsung.com + * This file is part of the coreboot project. * - * See file CREDITS for list of people who contributed to this - * project. + * Copyright (C) 2009 Samsung Electronics * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -19,22 +14,18 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#include <common.h> +#include <console/console.h> #include <arch/io.h> #include <timer.h> -#include <console/console.h> -#include <cpu/samsung/exynos5250/pwm.h> -#include <cpu/samsung/exynos5250/clk.h> -#include <cpu/samsung/exynos5250/cpu.h> -#include <cpu/samsung/exynos5250/exynos5-common.h> +#include <delay.h> +#include "timer.h" +#include "pwm.h" +#include "clk.h" +#include "cpu.h"
-//#include <pwm.h> - -//DECLARE_GLOBAL_DATA_PTR; static unsigned long long timer_reset_value; static unsigned long lastinc;
@@ -59,7 +50,7 @@ static unsigned long timer_get_us_down(void) return readl(&timer->tcnto4); }
-int init_timer(void) +void init_timer(void) { /* Timer may have been enabled in SPL */ if (!pwm_check_enabled(4)) { @@ -69,15 +60,11 @@ int init_timer(void) pwm_enable(4);
/* Use this as the current monotonic time in us */ - //gd->timer_reset_value = 0; timer_reset_value = 0;
/* Use this as the last timer value we saw */ - //gd->lastinc = timer_get_us_down(); lastinc = timer_get_us_down(); } - - return 0; }
/* @@ -92,13 +79,6 @@ unsigned long get_timer(unsigned long base) * The timer may have wrapped around, but it makes no difference to * our arithmetic here. */ -#if 0 - gd->timer_reset_value += gd->lastinc - now; - gd->lastinc = now; - - /* Divide by 1000 to convert from us to ms */ - return gd->timer_reset_value / 1000 - base; -#endif timer_reset_value += lastinc - now; lastinc = now;
@@ -106,20 +86,8 @@ unsigned long get_timer(unsigned long base) return timer_reset_value / 1000 - base; }
-unsigned long timer_get_us(void) -{ - struct s5p_timer *const timer = s5p_get_base_timer(); - unsigned long now_downward_us = readl(&timer->tcnto4); - - /* - * Note that this timer counts downward. The pre-SPL process (BL1) - * takes about 100ms, so add this in here. - */ - return CONFIG_SPL_TIME_US - now_downward_us; -} - /* delay x useconds */ -void udelay(unsigned long usec) +void udelay(unsigned usec) { struct mono_time current, end;
@@ -128,7 +96,7 @@ void udelay(unsigned long usec) mono_time_add_usecs(&end, usec);
if (mono_time_after(¤t, &end)) { - printk(BIOS_EMERG, "udelay: 0x%08lx is impossibly large\n", + printk(BIOS_EMERG, "udelay: 0x%08x is impossibly large\n", usec); /* There's not much we can do if usec is too big. Use a long, * paranoid delay value and hope for the best... */ @@ -140,25 +108,3 @@ void udelay(unsigned long usec) timer_monotonic_get(¤t); }
-/* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -unsigned long get_tbclk(void) -{ - return CONFIG_SYS_HZ; -} - -unsigned long timer_get_boot_us(void) -{ - return timer_get_us(); -} diff --git a/src/cpu/samsung/exynos5250/timer.h b/src/cpu/samsung/exynos5250/timer.h new file mode 100644 index 0000000..100c500 --- /dev/null +++ b/src/cpu/samsung/exynos5250/timer.h @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef CPU_SAMSUNG_EXYNOS5250_TIMER_H +#define CPU_SAMSUNG_EXYNOS5250_TIMER_H + +unsigned long get_timer(unsigned long base); + +#endif diff --git a/src/cpu/samsung/exynos5250/tmu.c b/src/cpu/samsung/exynos5250/tmu.c new file mode 100644 index 0000000..5a871fd --- /dev/null +++ b/src/cpu/samsung/exynos5250/tmu.c @@ -0,0 +1,215 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Samsung Electronics + * Copyright 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* EXYNOS - Thermal Management Unit */ + +#include <console/console.h> +#include <arch/io.h> +#include "power.h" +#include "tmu.h" + +#define TRIMINFO_RELOAD 1 +#define CORE_EN 1 +#define THERM_TRIP_EN (1 << 12) + +#define INTEN_RISE0 1 +#define INTEN_RISE1 (1 << 4) +#define INTEN_RISE2 (1 << 8) +#define INTEN_FALL0 (1 << 16) +#define INTEN_FALL1 (1 << 20) +#define INTEN_FALL2 (1 << 24) + +#define TRIM_INFO_MASK 0xff + +#define INTCLEAR_RISE0 1 +#define INTCLEAR_RISE1 (1 << 4) +#define INTCLEAR_RISE2 (1 << 8) +#define INTCLEAR_FALL0 (1 << 16) +#define INTCLEAR_FALL1 (1 << 20) +#define INTCLEAR_FALL2 (1 << 24) +#define INTCLEARALL (INTCLEAR_RISE0 | INTCLEAR_RISE1 | \ + INTCLEAR_RISE2 | INTCLEAR_FALL0 | \ + INTCLEAR_FALL1 | INTCLEAR_FALL2) + +struct tmu_info exynos5250_tmu_info = { + .tmu_base = 0x10060000, + .tmu_mux = 6, + .data = { + .ts = { + .min_val = 25, + .max_val = 125, + .start_warning = 95, + .start_tripping = 105, + .hardware_tripping = 110, + }, + .efuse_min_value = 40, + .efuse_value = 55, + .efuse_max_value = 100, + .slope = 0x10008802, + }, + .dc_value = 25, +}; + +/* + * After reading temperature code from register, compensating + * its value and calculating celsius temperatue, + * get current temperatue. + * + * @return current temperature of the chip as sensed by TMU + */ +static int get_cur_temp(struct tmu_info *info) +{ + int cur_temp; + struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base; + + /* Temperature code range between min 25 and max 125 */ + cur_temp = readl(®->current_temp) & 0xff; + + /* Calibrate current temperature */ + if (cur_temp) + cur_temp = cur_temp - info->te1 + info->dc_value; + + return cur_temp; +} + +/* + * Monitors status of the TMU device and exynos temperature + * + * @info TMU info + * @temp pointer to the current temperature value + * @return enum tmu_status_t value, code indicating event to execute + */ +enum tmu_status_t tmu_monitor(struct tmu_info *info, int *temp) +{ + if (info->tmu_state == TMU_STATUS_INIT) + return -1; + + int cur_temp; + struct tmu_data *data = &info->data; + + /* Read current temperature of the SOC */ + cur_temp = get_cur_temp(info); + *temp = cur_temp; + + /* Temperature code lies between min 25 and max 125 */ + if (cur_temp >= data->ts.start_tripping && + cur_temp <= data->ts.max_val) + return TMU_STATUS_TRIPPED; + else if (cur_temp >= data->ts.start_warning) + return TMU_STATUS_WARNING; + else if (cur_temp < data->ts.start_warning && + cur_temp >= data->ts.min_val) + return TMU_STATUS_NORMAL; + /* Temperature code does not lie between min 25 and max 125 */ + else { + info->tmu_state = TMU_STATUS_INIT; + printk(BIOS_DEBUG, "EXYNOS_TMU: Thermal reading failed\n"); + return -1; + } + return 0; +} + +/* + * Calibrate and calculate threshold values and + * enable interrupt levels + * + * @param info pointer to the tmu_info struct + */ +static void tmu_setup_parameters(struct tmu_info *info) +{ + unsigned int te_temp, con; + unsigned int warning_code, trip_code, hwtrip_code; + unsigned int cooling_temp; + unsigned int rising_value; + struct tmu_data *data = &info->data; + struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base; + + /* Must reload for using efuse value at EXYNOS */ + writel(TRIMINFO_RELOAD, ®->triminfo_control); + + /* Get the compensation parameter */ + te_temp = readl(®->triminfo); + info->te1 = te_temp & TRIM_INFO_MASK; + info->te2 = ((te_temp >> 8) & TRIM_INFO_MASK); + + if ((data->efuse_min_value > info->te1) || + (info->te1 > data->efuse_max_value) + || (info->te2 != 0)) + info->te1 = data->efuse_value; + + /* Get RISING & FALLING Threshold value */ + warning_code = data->ts.start_warning + + info->te1 - info->dc_value; + trip_code = data->ts.start_tripping + + info->te1 - info->dc_value; + hwtrip_code = data->ts.hardware_tripping + + info->te1 - info->dc_value; + + cooling_temp = 0; + + rising_value = ((warning_code << 8) | + (trip_code << 16) | + (hwtrip_code << 24)); + + /* Set interrupt level */ + writel(rising_value, ®->threshold_temp_rise); + writel(cooling_temp, ®->threshold_temp_fall); + + /* + * Need to init all register settings after getting parameter info + * [28:23] vref [11:8] slope - Tuning parameter + * + * WARNING: this slope value writes into many bits in the tmu_control + * register, with the default FDT value of 268470274 (0x10008802) + * we are using this essentially sets the default register setting + * from the TRM for tmu_control. + * TODO(bhthompson): rewrite this code such that we are not performing + * a hard wipe of tmu_control and re verify functionality. + */ + writel(data->slope, ®->tmu_control); + + writel(INTCLEARALL, ®->intclear); + /* TMU core enable */ + con = readl(®->tmu_control); + con |= (info->tmu_mux << 20) | THERM_TRIP_EN | CORE_EN; + + writel(con, ®->tmu_control); + + /* Enable HW thermal trip */ + power_enable_hw_thermal_trip(); + + /* LEV1 LEV2 interrupt enable */ + writel(INTEN_RISE1 | INTEN_RISE2, ®->inten); +} + +/* + * Initialize TMU device + * + * @return int value, 0 for success + */ +int tmu_init(struct tmu_info *info) +{ + info->tmu_state = TMU_STATUS_INIT; + + tmu_setup_parameters(info); + info->tmu_state = TMU_STATUS_NORMAL; + + return 0; +} diff --git a/src/cpu/samsung/exynos5250/tmu.h b/src/cpu/samsung/exynos5250/tmu.h new file mode 100644 index 0000000..03eacd2 --- /dev/null +++ b/src/cpu/samsung/exynos5250/tmu.h @@ -0,0 +1,134 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* EXYNOS - Thermal Management Unit */ + +#ifndef CPU_SAMSUNG_EXYNOS5250_TMU_H +#define CPU_SAMSUNG_EXYNOS5250_TMU_H + +struct tmu_reg { + unsigned triminfo; + unsigned rsvd1; + unsigned rsvd2; + unsigned rsvd3; + unsigned rsvd4; + unsigned triminfo_control; + unsigned rsvd5; + unsigned rsvd6; + unsigned tmu_control; + unsigned rsvd7; + unsigned tmu_status; + unsigned sampling_internal; + unsigned counter_value0; + unsigned counter_value1; + unsigned rsvd8; + unsigned rsvd9; + unsigned current_temp; + unsigned rsvd10; + unsigned rsvd11; + unsigned rsvd12; + unsigned threshold_temp_rise; + unsigned threshold_temp_fall; + unsigned rsvd13; + unsigned rsvd14; + unsigned past_temp3_0; + unsigned past_temp7_4; + unsigned past_temp11_8; + unsigned past_temp15_12; + unsigned inten; + unsigned intstat; + unsigned intclear; + unsigned rsvd15; + unsigned emul_con; +}; + +enum tmu_status_t { + TMU_STATUS_INIT = 0, + TMU_STATUS_NORMAL, + TMU_STATUS_WARNING, + TMU_STATUS_TRIPPED, +}; + +/* Tmeperature threshold values for various thermal events */ +struct temperature_params { + /* minimum value in temperature code range */ + unsigned int min_val; + /* maximum value in temperature code range */ + unsigned int max_val; + /* temperature threshold to start warning */ + unsigned int start_warning; + /* temperature threshold CPU tripping */ + unsigned int start_tripping; + /* temperature threshold for HW tripping */ + unsigned int hardware_tripping; +}; + +/* Pre-defined values and thresholds for calibration of current temperature */ +struct tmu_data { + /* pre-defined temperature thresholds */ + struct temperature_params ts; + /* pre-defined efuse range minimum value */ + unsigned int efuse_min_value; + /* pre-defined efuse value for temperature calibration */ + unsigned int efuse_value; + /* pre-defined efuse range maximum value */ + unsigned int efuse_max_value; + /* current temperature sensing slope */ + unsigned int slope; +}; + +/* TMU device specific details and status */ +struct tmu_info { + /* base Address for the TMU */ + unsigned tmu_base; + /* mux Address for the TMU */ + int tmu_mux; + /* pre-defined values for calibration and thresholds */ + struct tmu_data data; + /* value required for triminfo_25 calibration */ + unsigned int te1; + /* value required for triminfo_85 calibration */ + unsigned int te2; + /* TMU DC value for threshold calculation */ + int dc_value; + /* enum value indicating status of the TMU */ + int tmu_state; +}; + +extern struct tmu_info *tmu_info; + +/* + * Monitors status of the TMU device and exynos temperature + * + * @info pointer to TMU info struct + * @temp pointer to the current temperature value + * @return enum tmu_status_t value, code indicating event to execute + * and -1 on error + */ +enum tmu_status_t tmu_monitor(struct tmu_info *info, int *temp); + +/* + * Initialize TMU device + * + * @info pointer to TMU info struct + * @return int value, 0 for success + */ +int tmu_init(struct tmu_info *info); + +#endif /* CPU_SAMSUNG_EXYNOS5250_TMU_H */ diff --git a/src/cpu/samsung/exynos5250/tzpc.h b/src/cpu/samsung/exynos5250/tzpc.h deleted file mode 100644 index b9937b8..0000000 --- a/src/cpu/samsung/exynos5250/tzpc.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * (C) Copyright 2012 Samsung Electronics - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#ifndef __TZPC_H_ -#define __TZPC_H_ - -#ifndef __ASSEMBLER__ -struct exynos5_tzpc { - unsigned int r0size; - char res1[0x7FC]; - unsigned int decprot0stat; - unsigned int decprot0set; - unsigned int decprot0clr; - unsigned int decprot1stat; - unsigned int decprot1set; - unsigned int decprot1clr; - unsigned int decprot2stat; - unsigned int decprot2set; - unsigned int decprot2clr; - unsigned int decprot3stat; - unsigned int decprot3set; - unsigned int decprot3clr; - char res2[0x7B0]; - unsigned int periphid0; - unsigned int periphid1; - unsigned int periphid2; - unsigned int periphid3; - unsigned int pcellid0; - unsigned int pcellid1; - unsigned int pcellid2; - unsigned int pcellid3; -}; -#endif - -#endif diff --git a/src/cpu/samsung/exynos5250/tzpc_init.c b/src/cpu/samsung/exynos5250/tzpc_init.c deleted file mode 100644 index 370c2ed..0000000 --- a/src/cpu/samsung/exynos5250/tzpc_init.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Lowlevel setup for SMDK5250 board based on S5PC520 - * - * Copyright (C) 2012 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <cpu/samsung/exynos5250/cpu.h> -#include <asm/arch/dmc.h> -#include <asm/arch/tzpc.h> -#include"setup.h" - -/* Setting TZPC[TrustZone Protection Controller] */ -void tzpc_init(void) -{ - struct exynos5_tzpc *tzpc; - unsigned int addr; - - for (addr = TZPC0_BASE; addr <= TZPC9_BASE; addr += TZPC_BASE_OFFSET) { - tzpc = (struct exynos5_tzpc *)addr; - - if (addr == TZPC0_BASE) - writel(R0SIZE, &tzpc->r0size); - - writel(DECPROTXSET, &tzpc->decprot0set); - writel(DECPROTXSET, &tzpc->decprot1set); - - if (addr == TZPC9_BASE) { - - /* TODO: Add comment here describing the numerical values - * used below. - */ - writel(0xf0, &tzpc->decprot2set); - writel(0x50, &tzpc->decprot3set); - } else { - writel(DECPROTXSET, &tzpc->decprot2set); - writel(DECPROTXSET, &tzpc->decprot3set); - } - } -} diff --git a/src/cpu/samsung/exynos5250/uart.c b/src/cpu/samsung/exynos5250/uart.c index e6d9654..319e495 100644 --- a/src/cpu/samsung/exynos5250/uart.c +++ b/src/cpu/samsung/exynos5250/uart.c @@ -1,14 +1,11 @@ /* - * (C) Copyright 2009 SAMSUNG Electronics - * Minkyu Kang mk7.kang@samsung.com - * Heungjun Kim riverful.kim@samsung.com + * This file is part of the coreboot project. * - * based on drivers/serial/s3c64xx.c + * Copyright (C) 2009 Samsung Electronics * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -17,19 +14,15 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#include <types.h> +#include <console/console.h> /* for __console definition */ #include <uart.h> #include <arch/io.h> - -#include <console/console.h> /* for __console definition */ - -#include <cpu/samsung/exynos5250/exynos5-common.h> -#include <cpu/samsung/exynos5250/uart.h> -#include <cpu/samsung/exynos5250/clk.h> +#include "uart.h" +#include "clk.h" +#include "cpu.h"
#define RX_FIFO_COUNT_MASK 0xff #define RX_FIFO_FULL_MASK (1 << 8) @@ -38,24 +31,6 @@ /* FIXME(dhendrix): exynos5 has 4 UARTs and its functions in u-boot take a base_port argument. However console_driver functions do not. */ static uint32_t base_port = CONFIG_CONSOLE_SERIAL_UART_ADDRESS; -#if 0 -/* Information about a serial port */ -struct fdt_serial { - u32 base_addr; /* address of registers in physical memory */ - u8 port_id; /* uart port number */ - u8 enabled; /* 1 if enabled, 0 if disabled */ -} config = { - -1U -}; -#endif - -#if 0 -static inline struct s5p_uart *s5p_get_base_uart(int dev_index) -{ - /* FIXME: there should be an assertion here if dev_index is >3 */ - return (struct s5p_uart *)(EXYNOS5_UART0_BASE + (0x10000 * dev_index)); -} -#endif
/* * The coefficient, used to calculate the baudrate on S5P UARTs is @@ -85,15 +60,13 @@ static const int udivslot[] = {
static void serial_setbrg_dev(void) { -// struct s5p_uart *const uart = s5p_get_base_uart(dev_index); struct s5p_uart *uart = (struct s5p_uart *)base_port; u32 uclk; u32 baudrate = CONFIG_TTYS0_BAUD; u32 val; - enum periph_id periph;
- periph = exynos5_get_periph_id(base_port); - uclk = clock_get_periph_rate(periph); + // All UARTs share the same clock. + uclk = clock_get_periph_rate(PERIPH_ID_UART3); val = uclk / baudrate;
writel(val / 16 - 1, &uart->ubrdiv); @@ -117,7 +90,6 @@ static void serial_setbrg_dev(void) */ static void exynos5_init_dev(void) { -// struct s5p_uart *const uart = s5p_get_base_uart(dev_index); struct s5p_uart *uart = (struct s5p_uart *)base_port;
// TODO initialize with correct peripheral id by base_port. @@ -136,7 +108,6 @@ static void exynos5_init_dev(void)
static int exynos5_uart_err_check(int op) { - //struct s5p_uart *const uart = s5p_get_base_uart(dev_index); struct s5p_uart *uart = (struct s5p_uart *)base_port; unsigned int mask;
@@ -162,7 +133,6 @@ static int exynos5_uart_err_check(int op) */ static unsigned char exynos5_uart_rx_byte(void) { -// struct s5p_uart *const uart = s5p_get_base_uart(dev_index); struct s5p_uart *uart = (struct s5p_uart *)base_port;
/* wait for character to arrive */ @@ -180,7 +150,6 @@ static unsigned char exynos5_uart_rx_byte(void) */ static void exynos5_uart_tx_byte(unsigned char data) { -// struct s5p_uart *const uart = s5p_get_base_uart(dev_index); struct s5p_uart *uart = (struct s5p_uart *)base_port;
/* wait for room in the tx FIFO */ @@ -193,6 +162,7 @@ static void exynos5_uart_tx_byte(unsigned char data) }
#if !defined(__PRE_RAM__) + static const struct console_driver exynos5_uart_console __console = { .init = exynos5_init_dev, .tx_byte = exynos5_uart_tx_byte, @@ -205,7 +175,9 @@ uint32_t uartmem_getbaseaddr(void) { return base_port; } + #else + void uart_init(void) { exynos5_init_dev(); @@ -221,6 +193,8 @@ void uart_tx_byte(unsigned char data) exynos5_uart_tx_byte(data); }
-void uart_tx_flush(void) { +void uart_tx_flush(void) +{ } + #endif diff --git a/src/cpu/samsung/exynos5250/uart.h b/src/cpu/samsung/exynos5250/uart.h index aea4a62..466ff40 100644 --- a/src/cpu/samsung/exynos5250/uart.h +++ b/src/cpu/samsung/exynos5250/uart.h @@ -1,13 +1,12 @@ /* - * (C) Copyright 2012 The ChromiumOS Authors - * (C) Copyright 2009 Samsung Electronics - * Minkyu Kang mk7.kang@samsung.com - * Heungjun Kim riverful.kim@samsung.com + * This file is part of the coreboot project. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. + * Copyright 2012 Google Inc. + * Copyright (C) 2009 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -16,15 +15,11 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * This file is based off of arch/arm/include/asm/arch-exynos5/uart.h - * from u-boot. + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#ifndef __EXYNOS5250_UART_H_ -#define __EXYNOS5250_UART_H_ +#ifndef CPU_SAMSUNG_EXYNOS5250_UART_H +#define CPU_SAMSUNG_EXYNOS5250_UART_H
#define EXYNOS5_UART0_BASE 0x12c00000 #define EXYNOS5_UART1_BASE 0x12c10000 @@ -56,9 +51,4 @@ struct s5p_uart { unsigned char res3[0xffd0]; };
-static inline int s5p_uart_divslot(void) -{ - return 0; -} - #endif diff --git a/src/cpu/samsung/exynos5250/wakeup.c b/src/cpu/samsung/exynos5250/wakeup.c index 5a13191..5764c83 100644 --- a/src/cpu/samsung/exynos5250/wakeup.c +++ b/src/cpu/samsung/exynos5250/wakeup.c @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2013 Google, Inc. All rights reserved. + * Copyright 2013 Google Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -18,9 +18,7 @@ */
#include <console/console.h> -#include <cpu/samsung/exynos5250/power.h> -#include <cpu/samsung/exynos5250/exynos5-common.h> - +#include "power.h" #include "wakeup.h"
void wakeup(void) diff --git a/src/cpu/samsung/exynos5250/wakeup.h b/src/cpu/samsung/exynos5250/wakeup.h index ed49d68..d38b52f 100644 --- a/src/cpu/samsung/exynos5250/wakeup.h +++ b/src/cpu/samsung/exynos5250/wakeup.h @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2013 Google, Inc. + * Copyright 2013 Google Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,8 +17,13 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#ifndef WAKEUP_H -#define WAKEUP_H +#ifndef CPU_SAMSUNG_EXYNOS5250_WAKEUP_H +#define CPU_SAMSUNG_EXYNOS5250_WAKEUP_H + +/* Power Down Modes */ +#define S5P_CHECK_SLEEP 0x00000BAD +#define S5P_CHECK_DIDLE 0xBAD00000 +#define S5P_CHECK_LPA 0xABAD0000
enum { // A normal boot (not suspend/resume) @@ -34,4 +39,4 @@ int wakeup_need_reset(void); int get_wakeup_state(void); void wakeup(void);
-#endif /* WAKEUP_H */ +#endif /* CPU_SAMSUNG_EXYNOS5250_WAKEUP_H */ diff --git a/src/cpu/samsung/exynos5250/watchdog.h b/src/cpu/samsung/exynos5250/watchdog.h deleted file mode 100644 index 5b3b651..0000000 --- a/src/cpu/samsung/exynos5250/watchdog.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics - * Heungjun Kim riverful.kim@samsung.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __ASM_ARM_ARCH_COMMON_WATCHDOG_H_ -#define __ASM_ARM_ARCH_COMMON_WATCHDOG_H_ - -#define WTCON_RESET_OFFSET 0 -#define WTCON_INTEN_OFFSET 2 -#define WTCON_CLKSEL_OFFSET 3 -#define WTCON_EN_OFFSET 5 -#define WTCON_PRE_OFFSET 8 - -#define WTCON_CLK_16 0x0 -#define WTCON_CLK_32 0x1 -#define WTCON_CLK_64 0x2 -#define WTCON_CLK_128 0x3 - -#define WTCON_CLK(x) ((x & 0x3) << WTCON_CLKSEL_OFFSET) -#define WTCON_PRESCALER(x) ((x) << WTCON_PRE_OFFSET) -#define WTCON_EN (0x1 << WTCON_EN_OFFSET) -#define WTCON_RESET (0x1 << WTCON_RESET_OFFSET) -#define WTCON_INT (0x1 << WTCON_INTEN_OFFSET) - -#ifndef __ASSEMBLER__ -struct s5p_watchdog { - unsigned int wtcon; - unsigned int wtdat; - unsigned int wtcnt; - unsigned int wtclrint; -}; - -/* functions */ -void wdt_stop(void); -void wdt_start(unsigned int timeout); -#endif /* __ASSEMBLER__ */ - -#endif diff --git a/src/cpu/samsung/exynos5250/wdt.c b/src/cpu/samsung/exynos5250/wdt.c deleted file mode 100644 index dbeefec..0000000 --- a/src/cpu/samsung/exynos5250/wdt.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (C) 2012 Samsung Electronics - * Minkyu Kang mk7.kang@samsung.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/watchdog.h> - -#define PRESCALER_VAL 255 - -void wdt_stop(void) -{ - struct s5p_watchdog *wdt = - samsung_get_base_watchdog(); - unsigned int wtcon; - - wtcon = readl(&wdt->wtcon); - wtcon &= ~(WTCON_EN | WTCON_INT | WTCON_RESET); - - writel(wtcon, &wdt->wtcon); -} - -void wdt_start(unsigned int timeout) -{ - struct s5p_watchdog *wdt = - samsung_get_base_watchdog(); - unsigned int wtcon; - - wdt_stop(); - - wtcon = readl(&wdt->wtcon); - wtcon |= (WTCON_EN | WTCON_CLK(WTCON_CLK_128)); - wtcon &= ~WTCON_INT; - wtcon |= WTCON_RESET; - wtcon |= WTCON_PRESCALER(PRESCALER_VAL); - - writel(timeout, &wdt->wtdat); - writel(timeout, &wdt->wtcnt); - writel(wtcon, &wdt->wtcon); -} diff --git a/src/drivers/maxim/max77686/max77686.c b/src/drivers/maxim/max77686/max77686.c index 5760d42..adc1627 100644 --- a/src/drivers/maxim/max77686/max77686.c +++ b/src/drivers/maxim/max77686/max77686.c @@ -21,8 +21,8 @@ * MA 02111-1307 USA */
+#include <console/console.h> #include <arch/io.h> -#include <common.h> #include <device/i2c.h>
#include "max77686.h" @@ -131,7 +131,7 @@ static int max77686_enablereg(unsigned int bus, enum max77686_regnum reg, int en ret = max77686_i2c_read(bus, MAX77686_I2C_ADDR, pmic->reg_enaddr, &read_data); if (ret != 0) { - debug("max77686 i2c read failed.\n"); + printk(BIOS_DEBUG, "max77686 i2c read failed.\n"); return -1; }
@@ -147,7 +147,7 @@ static int max77686_enablereg(unsigned int bus, enum max77686_regnum reg, int en ret = max77686_i2c_write(bus, MAX77686_I2C_ADDR, pmic->reg_enaddr, read_data); if (ret != 0) { - debug("max77686 i2c write failed.\n"); + printk(BIOS_DEBUG, "max77686 i2c write failed.\n"); return -1; }
@@ -165,13 +165,13 @@ int max77686_volsetting(unsigned int bus, enum max77686_regnum reg, pmic = &max77686_param[reg];
if (pmic->vol_addr == 0) { - debug("not a voltage register.\n"); + printk(BIOS_DEBUG, "not a voltage register.\n"); return -1; }
ret = max77686_i2c_read(bus, MAX77686_I2C_ADDR, pmic->vol_addr, &read_data); if (ret != 0) { - debug("max77686 i2c read failed.\n"); + printk(BIOS_DEBUG, "max77686 i2c read failed.\n"); return -1; }
@@ -181,7 +181,7 @@ int max77686_volsetting(unsigned int bus, enum max77686_regnum reg, vol_level = (volt - (u32)pmic->vol_min) * 1000;
if (vol_level < 0) { - debug("Not a valid voltage level to set\n"); + printk(BIOS_DEBUG, "Not a valid voltage level to set\n"); return -1; } vol_level /= (u32)pmic->vol_div; @@ -191,13 +191,13 @@ int max77686_volsetting(unsigned int bus, enum max77686_regnum reg,
ret = max77686_i2c_write(bus, MAX77686_I2C_ADDR, pmic->vol_addr, read_data); if (ret != 0) { - debug("max77686 i2c write failed.\n"); + printk(BIOS_DEBUG, "max77686 i2c write failed.\n"); return -1; }
ret = max77686_enablereg(bus, reg, enable); if (ret != 0) { - debug("Failed to enable buck/ldo.\n"); + printk(BIOS_DEBUG, "Failed to enable buck/ldo.\n"); return -1; } return 0; @@ -215,7 +215,7 @@ int max77686_disable_backup_batt(unsigned int bus)
ret = max77686_i2c_read(bus, MAX77686_I2C_ADDR, REG_BBAT, &val); if (ret) { - debug("max77686 i2c read failed\n"); + printk(BIOS_DEBUG, "max77686 i2c read failed\n"); return ret; }
@@ -228,7 +228,7 @@ int max77686_disable_backup_batt(unsigned int bus) val &= ~BBAT_BBCHOSTEN_MASK; ret = max77686_i2c_write(bus, MAX77686_I2C_ADDR, REG_BBAT, val); if (ret) { - debug("max77686 i2c write failed\n"); + printk(BIOS_DEBUG, "max77686 i2c write failed\n"); return -1; }
@@ -236,7 +236,7 @@ int max77686_disable_backup_batt(unsigned int bus) val |= BBAT_BBCVS_MASK; ret = max77686_i2c_write(bus, MAX77686_I2C_ADDR, REG_BBAT, val); if (ret) { - debug("max77686 i2c write failed\n"); + printk(BIOS_DEBUG, "max77686 i2c write failed\n"); return -1; }
diff --git a/src/include/gpio.h b/src/include/gpio.h deleted file mode 100644 index f602b1e..0000000 --- a/src/include/gpio.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright 2012, Google Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials provided - * with the distribution. - * * Neither the name of Google Inc. nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef GPIO_H -#define GPIO_H - -enum gpio_types { - GPIO_IN, - GPIO_OUT, - GPIO_ALT, /* catch-all for alternate functions */ -}; - -/* - * Many-value logic (3 states). This can be used for inputs whereby presence - * of external pull-up or pull-down resistors can be added to overcome internal - * pull-ups/pull-downs and force a single value. - * - * Thus, external pull resistors can force a 0 or 1 and if the value changes - * along with internal pull-up/down enable then the input is floating. - * - * Vpd | Vpu | MVL - * ----------------- - * 0 | 0 | 0 - * ----------------- - * 0 | 1 | Z <-- floating input will follow internal pull up/down - * ----------------- - * 1 | 1 | 1 - */ -enum mvl3 { - LOGIC_0, - LOGIC_1, - LOGIC_Z, /* high impedence / tri-stated / floating */ -}; - -#endif /* GPIO_H */ diff --git a/src/mainboard/emulation/qemu-armv7/romstage.c b/src/mainboard/emulation/qemu-armv7/romstage.c index 81f62b6..4a16436 100644 --- a/src/mainboard/emulation/qemu-armv7/romstage.c +++ b/src/mainboard/emulation/qemu-armv7/romstage.c @@ -14,18 +14,16 @@ */
#include <cbfs.h> -#include <common.h> #include <console/console.h> #include <arch/stages.h>
void main(void) { void *entry; + console_init(); - printk(BIOS_INFO, "hello from romstage\n");
entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/coreboot_ram"); - printk(BIOS_INFO, "entry is 0x%p, leaving romstage.\n", entry);
stage_exit(entry); } diff --git a/src/mainboard/google/snow/Kconfig b/src/mainboard/google/snow/Kconfig index 12b1180..3ebaa58 100644 --- a/src/mainboard/google/snow/Kconfig +++ b/src/mainboard/google/snow/Kconfig @@ -28,7 +28,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select EC_GOOGLE_CHROMEEC_I2C select BOARD_ROMSIZE_KB_4096 select DRIVER_MAXIM_MAX77686 - select EXYNOS_DISPLAYPORT select CHROMEOS select DRIVER_TI_TPS65090 select MAINBOARD_HAS_NATIVE_VGA_INIT diff --git a/src/mainboard/google/snow/Makefile.inc b/src/mainboard/google/snow/Makefile.inc index 9649662..2858743 100644 --- a/src/mainboard/google/snow/Makefile.inc +++ b/src/mainboard/google/snow/Makefile.inc @@ -1,7 +1,7 @@ ## ## This file is part of the coreboot project. ## -## Copyright (C) 2012 Google Inc. +## Copyright 2012 Google Inc. ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by diff --git a/src/mainboard/google/snow/chromeos.c b/src/mainboard/google/snow/chromeos.c index 9ac3022..404ed4a 100644 --- a/src/mainboard/google/snow/chromeos.c +++ b/src/mainboard/google/snow/chromeos.c @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2013 Google, Inc. + * Copyright 2013 Google Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/src/mainboard/google/snow/devicetree.cb b/src/mainboard/google/snow/devicetree.cb index deebbf4..c14f374 100644 --- a/src/mainboard/google/snow/devicetree.cb +++ b/src/mainboard/google/snow/devicetree.cb @@ -1,7 +1,7 @@ ## ## This file is part of the coreboot project. ## -## Copyright (C) 2012 Google Inc. +## Copyright 2012 Google Inc. ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by diff --git a/src/mainboard/google/snow/exynos5250.h b/src/mainboard/google/snow/exynos5250.h index 998d9ee..98d36f9 100644 --- a/src/mainboard/google/snow/exynos5250.h +++ b/src/mainboard/google/snow/exynos5250.h @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2013 Google, Inc. + * Copyright 2013 Google Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/src/mainboard/google/snow/mainboard.c b/src/mainboard/google/snow/mainboard.c index 4c192fc..a62f62c 100644 --- a/src/mainboard/google/snow/mainboard.c +++ b/src/mainboard/google/snow/mainboard.c @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2013 Google, Inc. + * Copyright 2013 Google Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -28,15 +28,13 @@ #include <boot/coreboot_tables.h> #include <arch/cache.h> #include <arch/exception.h> -#include <arch/gpio.h> -#include <cpu/samsung/exynos5250/exynos-tmu.h> +#include <cpu/samsung/exynos5250/tmu.h> #include <cpu/samsung/exynos5250/clk.h> #include <cpu/samsung/exynos5250/cpu.h> #include <cpu/samsung/exynos5250/gpio.h> #include <cpu/samsung/exynos5250/power.h> - #include <cpu/samsung/exynos5250/i2c.h> -#include <cpu/samsung/exynos5250/s5p-dp-core.h> +#include <cpu/samsung/exynos5250/dp-core.h>
#include "exynos5250.h"
diff --git a/src/mainboard/google/snow/memory.c b/src/mainboard/google/snow/memory.c index 0707970..9a1fbed 100644 --- a/src/mainboard/google/snow/memory.c +++ b/src/mainboard/google/snow/memory.c @@ -2,7 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Samsung Electronics - * Copyright (C) 2013 Google Inc. + * Copyright 2013 Google Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,11 +22,10 @@ #include <stdlib.h> #include <console/console.h>
-#include <gpio.h> #include <cpu/samsung/exynos5250/gpio.h> #include <cpu/samsung/exynos5250/setup.h> #include <cpu/samsung/exynos5250/dmc.h> -#include <cpu/samsung/exynos5250/clock_init.h> +#include <cpu/samsung/exynos5250/clk.h>
const struct mem_timings mem_timings[] = { { diff --git a/src/mainboard/google/snow/romstage.c b/src/mainboard/google/snow/romstage.c index 096db42..0e25def 100644 --- a/src/mainboard/google/snow/romstage.c +++ b/src/mainboard/google/snow/romstage.c @@ -21,10 +21,8 @@
#include <armv7.h> #include <cbfs.h> -#include <common.h>
#include <arch/cache.h> -#include <arch/gpio.h> #include <cpu/samsung/exynos5250/i2c.h> #include <cpu/samsung/exynos5250/clk.h> #include <cpu/samsung/exynos5250/cpu.h> @@ -33,7 +31,6 @@ #include <cpu/samsung/exynos5250/setup.h> #include <cpu/samsung/exynos5250/periph.h> #include <cpu/samsung/exynos5250/power.h> -#include <cpu/samsung/exynos5250/clock_init.h> #include <cpu/samsung/exynos5250/wakeup.h> #include <console/console.h> #include <arch/stages.h> diff --git a/src/mainboard/google/snow/wakeup.c b/src/mainboard/google/snow/wakeup.c index c116c77..2fe1ab0 100644 --- a/src/mainboard/google/snow/wakeup.c +++ b/src/mainboard/google/snow/wakeup.c @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2013 Google, Inc. All rights reserved. + * Copyright 2013 Google Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,13 +17,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#include <arch/gpio.h> -#include <arch/hlt.h> -#include <console/console.h> #include <cpu/samsung/exynos5250/gpio.h> -#include <cpu/samsung/exynos5250/power.h> -#include <cpu/samsung/exynos5250/exynos5-common.h> - #include <cpu/samsung/exynos5250/wakeup.h>
int wakeup_need_reset(void) diff --git a/src/mainboard/ti/beaglebone/romstage.c b/src/mainboard/ti/beaglebone/romstage.c index 74eaaf2..3b9cae8 100644 --- a/src/mainboard/ti/beaglebone/romstage.c +++ b/src/mainboard/ti/beaglebone/romstage.c @@ -21,7 +21,6 @@
#include <armv7.h> #include <cbfs.h> -#include <common.h>
#include <arch/stages.h> #include <console/console.h>