Fabian Kunkel (fabi@adv.bruhnspace.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/10287
-gerrit
commit 48cce3f9dda2be764331aa74b73a3648972a7dbd Author: Fabian Kunkel fabi@adv.bruhnspace.com Date: Mon May 25 17:04:28 2015 +0200
SuperIO: Add support for Fintek F81866D
This patch adds support for the Fintek F81866D, which is very similar to the F81865. The F81866 adds some Fancontrol and correct temp sensor read out.
Change-Id: Id2fc1119b37142f8101f71908e394ee69c45041d Signed-off-by: Fabian Kunkel fabi@adv.bruhnspace.com --- src/superio/fintek/Kconfig | 4 + src/superio/fintek/Makefile.inc | 1 + src/superio/fintek/f81866d/Makefile.inc | 24 +++++ src/superio/fintek/f81866d/f81866d.h | 45 ++++++++ src/superio/fintek/f81866d/f81866d_hwm.c | 124 +++++++++++++++++++++++ src/superio/fintek/f81866d/f81866d_temp_sensor.c | 47 +++++++++ src/superio/fintek/f81866d/fintek_internal.h | 31 ++++++ src/superio/fintek/f81866d/superio.c | 89 ++++++++++++++++ 8 files changed, 365 insertions(+)
diff --git a/src/superio/fintek/Kconfig b/src/superio/fintek/Kconfig index 2a7438b..5403e0a 100644 --- a/src/superio/fintek/Kconfig +++ b/src/superio/fintek/Kconfig @@ -54,3 +54,7 @@ config SUPERIO_FINTEK_F81216H config SUPERIO_FINTEK_F81865F bool select SUPERIO_FINTEK_COMMON_ROMSTAGE + +config SUPERIO_FINTEK_F81866D + bool + select SUPERIO_FINTEK_COMMON_ROMSTAGE \ No newline at end of file diff --git a/src/superio/fintek/Makefile.inc b/src/superio/fintek/Makefile.inc index 60a7a04..40abb8a 100644 --- a/src/superio/fintek/Makefile.inc +++ b/src/superio/fintek/Makefile.inc @@ -28,3 +28,4 @@ subdirs-y += f71872 subdirs-y += f71889 subdirs-y += f81216h subdirs-y += f81865f +subdirs-y += f81866d diff --git a/src/superio/fintek/f81866d/Makefile.inc b/src/superio/fintek/f81866d/Makefile.inc new file mode 100644 index 0000000..dd69894 --- /dev/null +++ b/src/superio/fintek/f81866d/Makefile.inc @@ -0,0 +1,24 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2015 BAP - Bruhnspace Advanced Projects +## (Written by Fabian Kunkel fabi@adv.bruhnspace.com for BAP) +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc. +## + +ramstage-$(CONFIG_SUPERIO_FINTEK_F81866D) += f81866d_temp_sensor.c +ramstage-$(CONFIG_SUPERIO_FINTEK_F81866D) += f81866d_hwm.c +ramstage-$(CONFIG_SUPERIO_FINTEK_F81866D) += superio.c diff --git a/src/superio/fintek/f81866d/f81866d.h b/src/superio/fintek/f81866d/f81866d.h new file mode 100644 index 0000000..055bb9e --- /dev/null +++ b/src/superio/fintek/f81866d/f81866d.h @@ -0,0 +1,45 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 BAP - Bruhnspace Advanced Projects + * (Written by Fabian Kunkel fabi@adv.bruhnspace.com for BAP) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +/* + * Datasheet: + * - Name: F81866D/A-I + */ + +#ifndef SUPERIO_FINTEK_F81866_H +#define SUPERIO_FINTEK_F81866_H + +/* Logical Device Numbers (LDN) */ +#define F81866D_FDC 0x00 /* Floppy */ +#define F81866D_SP1 0x10 /* UART1 */ +#define F81866D_SP2 0x11 /* UART2 */ +#define F81866D_SP3 0x12 /* UART3 */ +#define F81866D_SP4 0x13 /* UART4 */ +#define F81866D_SP5 0x14 /* UART3 */ +#define F81866D_SP6 0x15 /* UART4 */ +#define F81866D_PP 0x03 /* Parallel Port */ +#define F81866D_HWM 0x04 /* Hardware Monitor */ +#define F81866D_KBC 0x05 /* Keyboard/Mouse */ +#define F81866D_GPIO 0x06 /* General Purpose I/O (GPIO) */ +#define F81866D_WDT 0x07 /* Watchdog */ +#define F81866D_PME 0x0a /* Power Management Events (PME) */ + +#endif /* SUPERIO_FINTEK_F81866_H */ diff --git a/src/superio/fintek/f81866d/f81866d_hwm.c b/src/superio/fintek/f81866d/f81866d_hwm.c new file mode 100644 index 0000000..073b371 --- /dev/null +++ b/src/superio/fintek/f81866d/f81866d_hwm.c @@ -0,0 +1,124 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 BAP - Bruhnspace Advanced Projects + * (Written by Fabian Kunkel fabi@adv.bruhnspace.com for BAP) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +/* Setup only for Fan2 + * Todo: Add support for Fan1 and Fan3 + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/device.h> +#include <device/pnp.h> +#include "fintek_internal.h" + + +// Set to AMD +#define HWM_AMD_TSI_ADDR 0x08 +#define HWM_AMD_TSI_CONTROL_REG 0x0A + +// Set temp sensors type +#define TEMP_SENS_TYPE_REG 0x6B + +// FAN prog sel +#define HWM_FAN3_CONTROL 0x9A +#define HWM_FAN_SEL 0x94 +#define HWM_FAN_MODE 0x96 +#define HWM_FAN_FAST_FILTER 0x97 + +// Fan expected speed +#define HWM_FAN2_EX_SPEED1 0xB2 +#define HWM_FAN2_EX_SPEED2 0xB3 + +// 4 Boundries +#define HWM_FAN2_BOUND1 0xB6 +#define HWM_FAN2_BOUND2 0xB7 +#define HWM_FAN2_BOUND3 0xB8 +#define HWM_FAN2_BOUND4 0xB9 + +// 5 Segment Speeds +#define HWM_FAN2_SEG1_SPEED_COUNT 0xBA +#define HWM_FAN2_SEG2_SPEED_COUNT 0xBB +#define HWM_FAN2_SEG3_SPEED_COUNT 0xBC +#define HWM_FAN2_SEG4_SPEED_COUNT 0xBD +#define HWM_FAN2_SEG5_SPEED_COUNT 0xBE + +// FAN1 Temp Mapping +#define HWM_FAN2_TEMP_MAP_SEL 0xBF + +/* Defines freq. for fan control */ +#define PWM_220HZ_FAN3_CONTROL 0x20 +#define PWM_5KHZ_FAN3_CONTROL 0x20 +#define PWM_11KHZ_FAN3_CONTROL 0x00 +#define PWM_23KHZ_FAN3_CONTROL 0x00 + +#define PWM_220HZ_FAN2_MAP_SEL 0x3D +#define PWM_5KHZ_FAN2_MAP_SEL 0x1D +#define PWM_11KHZ_FAN2_MAP_SEL 0x3D +#define PWM_23KHZ_FAN2_MAP_SEL 0x1D + + +void f81866d_hwm_init(struct device *dev) +{ + struct resource *res = find_resource(dev, PNP_IDX_IO0); + + if (!res) { + printk(BIOS_WARNING, "Super I/O HWM: No HWM resource found.\n"); + return; + } + + u16 port = res->base; + + pnp_enter_conf_mode(dev); + + /* Use AMD TSI */ + pnp_write_index(port, HWM_AMD_TSI_ADDR, 0x98); + pnp_write_index(port, HWM_AMD_TSI_CONTROL_REG, 0x02); + + // Set temp1 sensor to thermistor + pnp_write_index(port, TEMP_SENS_TYPE_REG, 0x04); + + /* Select FAN Type */ + pnp_write_index(port, HWM_FAN_SEL, 0xC0); // 0xC0 set FAN2 to PWM + + /* Select FAN Mode*/ + pnp_write_index(port, HWM_FAN_MODE, 0xD5); // 0xD5 sets FAN1-3 to Auto RPM mode + + pnp_write_index(port, HWM_FAN_FAST_FILTER, 0x02); // Faster fan + + /* Set Boundries */ + pnp_write_index(port, HWM_FAN2_BOUND1, 0x3C); //60°C + pnp_write_index(port, HWM_FAN2_BOUND2, 0x32); //50°C + pnp_write_index(port, HWM_FAN2_BOUND3, 0x28); //40°C + pnp_write_index(port, HWM_FAN2_BOUND4, 0x1E); //30°C + + /* Set Speed */ + pnp_write_index(port, HWM_FAN2_SEG1_SPEED_COUNT, 0xFF); // 100% + pnp_write_index(port, HWM_FAN2_SEG2_SPEED_COUNT, 0xD9); // 85% + pnp_write_index(port, HWM_FAN2_SEG3_SPEED_COUNT, 0xB2); // 70% + pnp_write_index(port, HWM_FAN2_SEG4_SPEED_COUNT, 0x99); // 60% + pnp_write_index(port, HWM_FAN2_SEG5_SPEED_COUNT, 0x80); // 50% + + /* Set temp follows */ + pnp_write_index(port, HWM_FAN3_CONTROL, PWM_220HZ_FAN3_CONTROL); + pnp_write_index(port, HWM_FAN2_TEMP_MAP_SEL, PWM_220HZ_FAN2_MAP_SEL); + + pnp_exit_conf_mode(dev); +} diff --git a/src/superio/fintek/f81866d/f81866d_temp_sensor.c b/src/superio/fintek/f81866d/f81866d_temp_sensor.c new file mode 100644 index 0000000..aaddd45 --- /dev/null +++ b/src/superio/fintek/f81866d/f81866d_temp_sensor.c @@ -0,0 +1,47 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 BAP - Bruhnspace Advanced Projects + * (Written by Fabian Kunkel fabi@adv.bruhnspace.com for BAP) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <arch/io.h> +#include <device/device.h> +#include <device/pnp.h> +#include <console/console.h> +#include "fintek_internal.h" + +#define TEMP_SENS_TYPE_REG 0x6B + +void f81866d_temp_sensor(struct device *dev) +{ + struct resource *res = find_resource(dev, PNP_IDX_IO0); + + if (!res) { + printk(BIOS_WARNING, "Super I/O HWM: No HWM resource found.\n"); + return; + } + + u16 port = res->base; + + pnp_enter_conf_mode(dev); + + // Set temp1 sensor correct to thermistor + pnp_write_index(port, TEMP_SENS_TYPE_REG, 0x04); + + pnp_exit_conf_mode(dev); +} diff --git a/src/superio/fintek/f81866d/fintek_internal.h b/src/superio/fintek/f81866d/fintek_internal.h new file mode 100644 index 0000000..c198421 --- /dev/null +++ b/src/superio/fintek/f81866d/fintek_internal.h @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 BAP - Bruhnspace Advanced Projects + * (Written by Fabian Kunkel fabi@adv.bruhnspace.com for BAP) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#ifndef SUPERIO_FINTEK_F81866D_INTERNAL_H +#define SUPERIO_FINTEK_F81866D_INTERNAL_H + +#include <arch/io.h> +#include <device/pnp.h> + +void f81866d_temp_sensor(struct device *dev); +void f81866d_hwm_init(struct device *dev); + +#endif /* SUPERIO_FINTEK_F81866D_INTERNAL_H */ diff --git a/src/superio/fintek/f81866d/superio.c b/src/superio/fintek/f81866d/superio.c new file mode 100644 index 0000000..d12d241 --- /dev/null +++ b/src/superio/fintek/f81866d/superio.c @@ -0,0 +1,89 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 BAP - Bruhnspace Advanced Projects + * (Written by Fabian Kunkel fabi@adv.bruhnspace.com for BAP) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <arch/io.h> +#include <device/device.h> +#include <device/pnp.h> +#include <superio/conf_mode.h> +#include <console/console.h> +#include <stdlib.h> +#include <pc80/keyboard.h> +#include "f81866d.h" +#include "fintek_internal.h" + +static void f81866d_init(struct device *dev) +{ + if (!dev->enabled) + return; + + switch (dev->path.pnp.device) { + /* TODO: Might potentially need extra code for serial, wdt etc. */ + case F81866D_KBC: + pc_keyboard_init(); + break; + case F81866D_HWM: + + #if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) + // Fixing temp sensor readout according data sheet + f81866d_temp_sensor(dev); + #else + // Fixing temp sensor read out and init Fan control + f81866d_hwm_init(dev); + #endif + break; + } +} + +static struct device_operations ops = { + .read_resources = pnp_read_resources, + .set_resources = pnp_set_resources, + .enable_resources = pnp_enable_resources, + .enable = pnp_alt_enable, + .init = f81866d_init, + .ops_pnp_mode = &pnp_conf_mode_8787_aa, +}; + +static struct pnp_info pnp_dev_info[] = { + /* TODO: Some of the 0x7f8 etc. values may not be correct. */ + { &ops, F81866D_FDC, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07f8, 0}, }, + { &ops, F81866D_SP1, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, + { &ops, F81866D_SP2, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, + { &ops, F81866D_SP3, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, + { &ops, F81866D_SP4, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, + { &ops, F81866D_SP5, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, + { &ops, F81866D_SP6, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, + { &ops, F81866D_KBC, PNP_IO0 | PNP_IRQ0 | PNP_IRQ1, { 0x07ff, 0}, }, + { &ops, F81866D_PP, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07f8, 0}, }, + { &ops, F81866D_HWM, PNP_IO0 | PNP_IRQ0, { 0xff8, 0}, }, + { &ops, F81866D_GPIO, PNP_IRQ0, }, + { &ops, F81866D_PME, }, + { &ops, F81866D_WDT, }, +}; + +static void enable_dev(struct device *dev) +{ + pnp_enable_devices(dev, &ops, ARRAY_SIZE(pnp_dev_info), pnp_dev_info); +} + +struct chip_operations superio_fintek_f81866d_ops = { + CHIP_NAME("Fintek F81866D Super I/O") + .enable_dev = enable_dev +};