Alexandru Gagniuc (mr.nuke.me@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4656
-gerrit
commit ff745a7889cfac0c839ed26f4046a288cd98b573 Author: Alexandru Gagniuc mr.nuke.me@gmail.com Date: Fri Jan 10 23:06:03 2014 -0600
cpu/allwinner/a10: Provide utility to make a bootable image
Up until now, we relied on mksunxiboot to prepend the header which makes coreboot.rom bootable on Allwinner SoCs. If that tool was not present, the build silently failed.
Integrate this tool into our util/ package, so that we do not have to rely on mksunxiboot being in PATH. Our version of mksunxiboot also eliminates some limitations of the original tool, so we no longer have to use 'dd' to limit the file size.
Change-Id: Id5a4b1e2a3cb00cd1d6c70e6cbc3cfd8587e8a24 Signed-off-by: Alexandru Gagniuc mr.nuke.me@gmail.com --- src/cpu/allwinner/a10/Makefile.inc | 32 +++-- util/arm_boot_tools/mksunxiboot/mksunxiboot.c | 196 ++++++++++++++++++++++++++ 2 files changed, 218 insertions(+), 10 deletions(-)
diff --git a/src/cpu/allwinner/a10/Makefile.inc b/src/cpu/allwinner/a10/Makefile.inc index 03bc612..cc6c699 100644 --- a/src/cpu/allwinner/a10/Makefile.inc +++ b/src/cpu/allwinner/a10/Makefile.inc @@ -1,6 +1,7 @@ bootblock-y += bootblock_media.c bootblock-y += clock.c bootblock-y += gpio.c +bootblock-y += mmc.c bootblock-y += pinmux.c bootblock-y += raminit.c bootblock-y += timer.c @@ -9,6 +10,7 @@ bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += uart_console.c
romstage-y += bootblock_media.c romstage-y += clock.c +romstage-y += mmc.c romstage-y += pinmux.c romstage-y += timer.c romstage-y += twi.c @@ -17,6 +19,8 @@ romstage-y += uart_console.c
ramstage-y += bootblock_media.c ramstage-y += clock.c +ramstage-y += cpu.c +ramstage-y += mmc.c ramstage-y += monotonic_timer.c ramstage-y += timer.c ramstage-y += twi.c @@ -30,16 +34,24 @@ get_bootblock_size= \ sed 's/[^0-9 ]//g')) \ $(shell echo $$(($(word 2, $(strip $(bb_s))))))
+# This tool is used to prepend a header to coreboot.rom to trick the SoC into +# loading out bootblock +# +MKSUNXIBOOT:=$(objutil)/mksunxiboot +$(MKSUNXIBOOT): $(top)/util/arm_boot_tools/mksunxiboot/mksunxiboot.c + @printf " HOSTCC $(subst $(obj)/,,$(@))\n" + $(HOSTCC) $(HOSTCFLAGS) -o $@ $< + # The boot ROM in the SoC will start loading code if a special BOOT0 header is # found (at an offset of 8KiB in either NAND or SD), and the checksum is -# correct. This header is normally added by the 'mxsunxiboot' tool. The boot ROM -# will load at most 24KiB of data to SRAM, so limit the file size accordingly. -# The BOOT0 header takes 32 bytes, so limit our file to 24KiB - 32 bytes. -# FIXME: Figure out how to safely integrate in coreboot.rom. -# FIXME: The file passed to mksunxiboot should only include the bootblock due -# to size limitations. -$(obj)/BOOT0: $(obj)/coreboot.rom +# correct. This header is added by the 'mxsunxiboot' tool, which is provided +# under util/arm_boot_tools/mksunxiboot. The boot ROM will load at most 24KiB of +# data to SRAM. The BOOT0 header takes 32 bytes, so limit our bootblock is +# linited tp to 24KiB - 32 bytes. +# TODO: make mksunxiboot take the bootblock size as a parameter +# TODO: print an error if bootblock is too large (maybe place ROMSTAGE at the +# exact offset needed to collide with the bootblock) +# +$(obj)/BOOT0: $(obj)/coreboot.rom $(MKSUNXIBOOT) @printf " BOOT0 $(subst $(obj)/,,$(^))\n" - touch $@ - dd if=$^ of=$^.tmp bs=24544 count=1 - -mksunxiboot $^.tmp $@ + $(MKSUNXIBOOT) $(word 1, $^) $@ diff --git a/util/arm_boot_tools/mksunxiboot/mksunxiboot.c b/util/arm_boot_tools/mksunxiboot/mksunxiboot.c new file mode 100644 index 0000000..6a38fa3 --- /dev/null +++ b/util/arm_boot_tools/mksunxiboot/mksunxiboot.c @@ -0,0 +1,196 @@ +/* + * A simple tool to generate bootable image for sunxi platform. + * + * Copyright (C) 2007-2011 Allwinner Technology Co., Ltd. + * Tom Cubie tangliang@allwinnertech.com + * Copyright (C) 2014 Alexandru Gagniuc mr.nuke.me@gmail.com + * Subject to the GNU GPL v2, or (at your option) any later version. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stdint.h> +#include <string.h> +#include <errno.h> + +/* boot head definition from sun4i boot code */ +struct boot_file_head { + uint32_t jump_instruction; /* one intruction jumping to real code */ + uint8_t magic[8]; /* ="eGON.BT0" or "eGON.BT1", not C-style str */ + uint32_t check_sum; /* generated by PC */ + uint32_t length; /* generated by PC */ + /* We use a simplified header, only filling in what is needed by the + * boot ROM. To be compatible with Allwinner tools the larger header + * below should be used, followed by a custom header if desired. */ + uint8_t pad[12]; /* align to 32 bytes */ +}; + +static const char *BOOT0_MAGIC = "eGON.BT0"; +static const uint32_t STAMP_VALUE = 0x5F0A6C39; +static const int HEADER_SIZE = 32; +/* Checksum at most 24 KiB */ +#define SRAM_LOAD_MAX_SIZE ((24 << 10) - sizeof(struct boot_file_head)) +static const int BLOCK_SIZE = 512; + +inline static uint32_t le32_to_h(const void *src) +{ + const uint8_t *b = src; + return ((b[3] << 24) | (b[2] << 16) | (b[1] << 8) | (b[0] << 0)); +} + +inline static void h_to_le32(uint32_t val32, void *dest) +{ + uint8_t *b = dest; + b[0] = (val32 >> 0) & 0xff; + b[1] = (val32 >> 8) & 0xff; + b[2] = (val32 >> 16) & 0xff; + b[3] = (val32 >> 24) & 0xff; +}; + +static void serialize_header(void *dest, const struct boot_file_head *hdr) +{ + /* Unused fields are zero */ + memset(dest, 0, HEADER_SIZE); + + h_to_le32(hdr->jump_instruction, dest + 0); + memcpy(dest + 4, BOOT0_MAGIC, 8); + h_to_le32(hdr->check_sum, dest + 12); + h_to_le32(hdr->length, dest + 16); +} + +/* check sum functon from sun4i boot code */ +static int fill_check_sum(struct boot_file_head *hdr, const void *boot_code) +{ + size_t i; + uint8_t raw_hdr[HEADER_SIZE]; + uint32_t chksum; + + if ((hdr->length & 0x3) != 0) { + fprintf(stderr, "BUG! Load size is not 4-byte aligned\n"); + return EXIT_FAILURE; + } + + /* Fill in checksum seed */ + hdr->check_sum = STAMP_VALUE; + + chksum = 0; + /* Checksum the header */ + serialize_header(raw_hdr, hdr); + for (i = 0; i < HEADER_SIZE; i += 4) + chksum += le32_to_h(raw_hdr + i); + + /* Checksum the boot code */ + for (i = 0; i < hdr->length - HEADER_SIZE; i += 4) + chksum += le32_to_h(boot_code + i); + + /* write back check sum */ + hdr->check_sum = chksum; + + return EXIT_SUCCESS; +} + +static uint32_t align(uint32_t size, uint32_t alignment) +{ + return ((size + alignment - 1) / alignment) * alignment; +} + +static void fill_header(struct boot_file_head *hdr, size_t load_size) +{ + /* b instruction */ + hdr->jump_instruction = 0xEA000000; + /* jump to the first instr after the header */ + hdr->jump_instruction |= (sizeof(*hdr) / sizeof(uint32_t) - 2); + /* no '0' termination in magic string */ + memcpy(&hdr->magic, BOOT0_MAGIC, 8); + + hdr->length = align(load_size + sizeof(hdr), BLOCK_SIZE); +} + +static long int fsize(FILE *file) +{ + long int size; + + fseek(file, 0L, SEEK_END); + size = ftell(file); + fseek(file, 0L, SEEK_SET); + return size; +} + +int main(int argc, char *argv[]) +{ + FILE *fd_in, *fd_out; + struct boot_file_head hdr; + long int file_size, load_size; + void *file_data; + uint8_t raw_hdr[HEADER_SIZE]; + int count; + + /* + * TODO: We could take an additional argument to see how much of the + * file to checksum. This way, the build system can tell us how large + * the bootblock is, and we can only checksum the BROM. + */ + if (argc < 2) { + printf("\tThis program makes an input bin file to sun4i " + "bootable image.\n" + "\tUsage: %s input_file out_putfile\n", argv[0]); + return EXIT_FAILURE; + } + + fd_in = fopen(argv[1], "r"); + if (!fd_in) { + fprintf(stderr, "Cannot open input %s", argv[1]); + return EXIT_FAILURE; + } + + /* get input file size */ + file_size = fsize(fd_in); + if ((file_data = malloc(file_size)) == NULL) { + fprintf(stderr, "Cannot allocate memory\n"); + return EXIT_FAILURE; + } + + printf("File size: 0x%x\n", file_size); + if (fread(file_data, file_size, 1, fd_in) != 1) { + fprintf(stderr, "Cannot read %s: %s\n", argv[1], + strerror(errno)); + return EXIT_FAILURE; + } + + load_size = align(file_size, sizeof(uint32_t)); + + if (load_size > SRAM_LOAD_MAX_SIZE) + load_size = SRAM_LOAD_MAX_SIZE; + + printf("Load size: 0x%x\n", load_size); + + fd_out = fopen(argv[2], "w"); + if (!fd_out) { + fprintf(stderr, "Cannot open output %s\n", argv[2]); + return EXIT_FAILURE; + } + + /* fill the header */ + fill_header(&hdr, load_size); + fill_check_sum(&hdr, file_data); + + /* Now write the header */ + serialize_header(raw_hdr, &hdr); + if (fwrite(raw_hdr, HEADER_SIZE, 1, fd_out) != 1) { + fprintf(stderr, "Cannot write header to %s: %s\n", argv[1], + strerror(errno)); + return EXIT_FAILURE; + } + + /* And finally, the boot code */ + if (fwrite(file_data, file_size, 1, fd_out) != 1) { + fprintf(stderr, "Cannot write to %s: %s\n", argv[1], + strerror(errno)); + return EXIT_FAILURE; + } + + fclose(fd_in); + fclose(fd_out); + + return EXIT_SUCCESS; +}