Bruce Griffith (Bruce.Griffith@se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/3808
-gerrit
commit 98acac116b4c386a7c6c6923a5b207ad4dfe7109 Author: Bruce Griffith bruce.griffith@se-eng.com Date: Tue Jul 23 11:50:12 2013 -0600
AMD Hudson/Yangtze: Enable support for SATA port multipliers
This patch sets a bit in the Yangtze/Hudson/Bolton southbridges to enable the extra protocol necessary to handle port multiplier chips. This has been turned on during most of Kabini development without any notable impact. Olive Hill has an optional daughter board that incorporates Silicon Image Steel Vines chips. This change has been tested with and without the daughter board. This change can be regression tested using any Hudson-based motherboard.
Change-Id: Ie87873b093f3e2a6a5c83b96ccb6c898d3e25f72 Signed-off-by: Bruce Griffith bruce.griffith@se-eng.com Reviewed-by: Martin Roth martin.roth@se-eng.com --- src/southbridge/amd/agesa/hudson/sata.c | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-)
diff --git a/src/southbridge/amd/agesa/hudson/sata.c b/src/southbridge/amd/agesa/hudson/sata.c index cc8bf95..883deeb 100644 --- a/src/southbridge/amd/agesa/hudson/sata.c +++ b/src/southbridge/amd/agesa/hudson/sata.c @@ -29,7 +29,33 @@
static void sata_init(struct device *dev) { -} + /************************************** + * Configure the SATA port multiplier * + **************************************/ + #define BYTE_TO_DWORD_OFFSET(x) (x/4) + #define AHCI_BASE_ADDRESS_REG 0x24 + #define MISC_CONTROL_REG 0x40 + #define UNLOCK_BIT (1<<0) + #define SATA_CAPABILITIES_REG 0xFC + #define CFG_CAP_SPM (1<<12) + + volatile u32 *ahci_ptr = + (u32*)(pci_read_config32(dev, AHCI_BASE_ADDRESS_REG) & 0xFFFFFF00); + u32 temp; + + /* unlock the write-protect */ + temp = pci_read_config32(dev, MISC_CONTROL_REG); + temp |= UNLOCK_BIT; + pci_write_config32(dev, MISC_CONTROL_REG, temp); + + /* set the SATA AHCI mode to allow port expanders */ + *(ahci_ptr + BYTE_TO_DWORD_OFFSET(SATA_CAPABILITIES_REG)) |= CFG_CAP_SPM; + + /* lock the write-protect */ + temp = pci_read_config32(dev, MISC_CONTROL_REG); + temp &= ~UNLOCK_BIT; + pci_write_config32(dev, MISC_CONTROL_REG, temp); +};
static struct pci_operations lops_pci = { /* .set_subsystem = pci_dev_set_subsystem, */