Werner Zeh has uploaded this change for review. ( https://review.coreboot.org/20403
Change subject: mc_bdx1: Set bus master bit for on-board PCI devices ......................................................................
mc_bdx1: Set bus master bit for on-board PCI devices
There are up to two on-board PCI devices where bus master has to be enabled in PCI config space. As there is no need for a complete PCI driver for these devices just set the bus master bit in mainboard_final().
Change-Id: Ic2896d5e7568a455737af26b14b2c398caae5f72 Signed-off-by: Werner Zeh werner.zeh@siemens.com --- M src/mainboard/siemens/mc_bdx1/mainboard.c 1 file changed, 15 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/03/20403/1
diff --git a/src/mainboard/siemens/mc_bdx1/mainboard.c b/src/mainboard/siemens/mc_bdx1/mainboard.c index fe35fe1..c6b8b76 100644 --- a/src/mainboard/siemens/mc_bdx1/mainboard.c +++ b/src/mainboard/siemens/mc_bdx1/mainboard.c @@ -20,6 +20,7 @@ #include <device/device.h> #include <device/pci_def.h> #include <device/pci_ops.h> +#include <device/pci_ids.h> #include <console/console.h> #if CONFIG_VGA_ROM_RUN #include <x86emu/x86emu.h> @@ -125,6 +126,20 @@ write16((spi_base + SPI_REG_OPTYPE), SPI_OPTYPE); write32((spi_base + SPI_REG_OPMENU_L), SPI_OPMENU_LOWER); write32((spi_base + SPI_REG_OPMENU_H), SPI_OPMENU_UPPER); + + /*Set Master Enable for on-board PCI devices.*/ + dev = dev_find_device(PCI_VENDOR_ID_SIEMENS, 0x403e, 0); + if (dev) { + uint16_t cmd = pci_read_config16(dev, PCI_COMMAND); + cmd |= PCI_COMMAND_MASTER; + pci_write_config16(dev, PCI_COMMAND, cmd); + } + dev = dev_find_device(PCI_VENDOR_ID_SIEMENS, 0x403f, 0); + if (dev) { + uint16_t cmd = pci_read_config16(dev, PCI_COMMAND); + cmd |= PCI_COMMAND_MASTER; + pci_write_config16(dev, PCI_COMMAND, cmd); + } }
/** \brief This function can decide if a given MAC address is valid or not.