Patrick Georgi has submitted this change. ( https://review.coreboot.org/c/coreboot/+/46702 )
Change subject: mb/google/auron: Prepare devicetree for PCH split ......................................................................
mb/google/auron: Prepare devicetree for PCH split
Tested with BUILD_TIMELESS=1, all variants remain identical.
Change-Id: I2b088b36c8e9ff9cbd47d625b14fc45ebd96532a Signed-off-by: Angel Pons th3fanbus@gmail.com Reviewed-on: https://review.coreboot.org/c/coreboot/+/46702 Reviewed-by: Nico Huber nico.h@gmx.de Tested-by: build bot (Jenkins) no-reply@coreboot.org --- M src/mainboard/google/auron/devicetree.cb M src/mainboard/google/auron/variants/auron_paine/overridetree.cb M src/mainboard/google/auron/variants/auron_yuna/overridetree.cb M src/mainboard/google/auron/variants/buddy/overridetree.cb M src/mainboard/google/auron/variants/gandof/overridetree.cb M src/mainboard/google/auron/variants/lulu/overridetree.cb M src/mainboard/google/auron/variants/samus/overridetree.cb 7 files changed, 135 insertions(+), 120 deletions(-)
Approvals: build bot (Jenkins): Verified Nico Huber: Looks good to me, approved
diff --git a/src/mainboard/google/auron/devicetree.cb b/src/mainboard/google/auron/devicetree.cb index a309762..09593b7 100644 --- a/src/mainboard/google/auron/devicetree.cb +++ b/src/mainboard/google/auron/devicetree.cb @@ -15,27 +15,6 @@ # Set backlight PWM value for eDP register "gpu_pch_backlight_pwm_hz" = "200"
- # EC range is 0x800-0x9ff - register "gen1_dec" = "0x00fc0801" - register "gen2_dec" = "0x00fc0901" - - # EC_SMI is GPIO34 - register "alt_gp_smi_en" = "0x0004" - register "gpe0_en_1" = "0x00000000" - # EC_SCI is GPIO36 - register "gpe0_en_2" = "0x00000010" - register "gpe0_en_3" = "0x00000000" - register "gpe0_en_4" = "0x00000000" - - register "sata_port_map" = "0x1" - register "sio_acpi_mode" = "1" - - # Force enable ASPM for PCIe Port1 - register "pcie_port_force_aspm" = "0x01" - - # Disable PCIe CLKOUT 2-5 and CLKOUT_XDP - register "icc_clock_disable" = "0x013c0000" - register "s0ix_enable" = "1"
device cpu_cluster 0 on @@ -46,40 +25,64 @@ device pci 00.0 on end # host bridge device pci 02.0 on end # vga controller device pci 03.0 on end # mini-hd audio - device pci 13.0 off end # Smart Sound Audio DSP - device pci 14.0 on end # USB3 XHCI - device pci 15.0 on end # Serial I/O DMA - device pci 15.1 on end # I2C0 - device pci 15.2 on end # I2C1 - device pci 15.3 off end # GSPI0 - device pci 15.4 off end # GSPI1 - device pci 15.5 off end # UART0 - device pci 15.6 off end # UART1 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT - device pci 17.0 off end # SDIO - device pci 19.0 off end # GbE - device pci 1b.0 on end # High Definition Audio - device pci 1c.0 on end # PCIe Port #1 - device pci 1c.1 off end # PCIe Port #2 - device pci 1c.2 off end # PCIe Port #3 - device pci 1c.3 off end # PCIe Port #4 - device pci 1c.4 off end # PCIe Port #5 - device pci 1c.5 off end # PCIe Port #6 - device pci 1d.0 on end # USB2 EHCI - device pci 1e.0 off end # PCI bridge - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC bridge - device pci 1f.2 on end # SATA Controller - device pci 1f.3 off end # SMBus - device pci 1f.6 on end # Thermal + +# chip soc/intel/broadwell/pch + # EC range is 0x800-0x9ff + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x00fc0901" + + # EC_SMI is GPIO34 + register "alt_gp_smi_en" = "0x0004" + register "gpe0_en_1" = "0x00000000" + # EC_SCI is GPIO36 + register "gpe0_en_2" = "0x00000010" + register "gpe0_en_3" = "0x00000000" + register "gpe0_en_4" = "0x00000000" + + register "sata_port_map" = "0x1" + register "sio_acpi_mode" = "1" + + # Force enable ASPM for PCIe Port1 + register "pcie_port_force_aspm" = "0x01" + + # Disable PCIe CLKOUT 2-5 and CLKOUT_XDP + register "icc_clock_disable" = "0x013c0000" + + device pci 13.0 off end # Smart Sound Audio DSP + device pci 14.0 on end # USB3 XHCI + device pci 15.0 on end # Serial I/O DMA + device pci 15.1 on end # I2C0 + device pci 15.2 on end # I2C1 + device pci 15.3 off end # GSPI0 + device pci 15.4 off end # GSPI1 + device pci 15.5 off end # UART0 + device pci 15.6 off end # UART1 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 17.0 off end # SDIO + device pci 19.0 off end # GbE + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 off end # PCIe Port #2 + device pci 1c.2 off end # PCIe Port #3 + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1d.0 on end # USB2 EHCI + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end + chip ec/google/chromeec + device pnp 0c09.0 on end + end + end # LPC bridge + device pci 1f.2 on end # SATA Controller + device pci 1f.3 off end # SMBus + device pci 1f.6 on end # Thermal +# end end end diff --git a/src/mainboard/google/auron/variants/auron_paine/overridetree.cb b/src/mainboard/google/auron/variants/auron_paine/overridetree.cb index 60aef30..dc70085 100644 --- a/src/mainboard/google/auron/variants/auron_paine/overridetree.cb +++ b/src/mainboard/google/auron/variants/auron_paine/overridetree.cb @@ -7,9 +7,11 @@ register "gpu_panel_power_backlight_on_delay" = "70" # 7ms register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms
- # DTLE DATA / EDGE values - register "sata_port0_gen3_dtle" = "0x5" - register "sata_port1_gen3_dtle" = "0x5" - - device domain 0 on end + device domain 0 on +# chip soc/intel/broadwell/pch + # DTLE DATA / EDGE values + register "sata_port0_gen3_dtle" = "0x5" + register "sata_port1_gen3_dtle" = "0x5" +# end + end end diff --git a/src/mainboard/google/auron/variants/auron_yuna/overridetree.cb b/src/mainboard/google/auron/variants/auron_yuna/overridetree.cb index da80fec..b46e34c 100644 --- a/src/mainboard/google/auron/variants/auron_yuna/overridetree.cb +++ b/src/mainboard/google/auron/variants/auron_yuna/overridetree.cb @@ -7,9 +7,11 @@ register "gpu_panel_power_backlight_on_delay" = "2100" # 210ms register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms
- # DTLE DATA / EDGE values - register "sata_port0_gen3_dtle" = "0x7" - register "sata_port1_gen3_dtle" = "0x5" - - device domain 0 on end + device domain 0 on +# chip soc/intel/broadwell/pch + # DTLE DATA / EDGE values + register "sata_port0_gen3_dtle" = "0x7" + register "sata_port1_gen3_dtle" = "0x5" +# end + end end diff --git a/src/mainboard/google/auron/variants/buddy/overridetree.cb b/src/mainboard/google/auron/variants/buddy/overridetree.cb index f148964..45229ba 100644 --- a/src/mainboard/google/auron/variants/buddy/overridetree.cb +++ b/src/mainboard/google/auron/variants/buddy/overridetree.cb @@ -7,32 +7,34 @@ register "gpu_panel_power_backlight_on_delay" = "70" # 7ms register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms
- register "sata_devslp_disable" = "0x1" - - register "sio_i2c0_voltage" = "1" # 1.8V - register "sio_i2c1_voltage" = "0" # 3.3V - - # DTLE DATA / EDGE values - register "sata_port0_gen3_dtle" = "0x5" - register "sata_port1_gen3_dtle" = "0x5" - - # Force enable ASPM for PCIe Port 5 - register "pcie_port_force_aspm" = "0x10" - - # Enable port coalescing - register "pcie_port_coalesce" = "1" - - # Disable PCIe CLKOUT 1,5 and CLKOUT_XDP - register "icc_clock_disable" = "0x01220000" - register "s0ix_enable" = "0"
device domain 0 on - device pci 13.0 on end # Smart Sound Audio DSP - device pci 1b.0 off end # High Definition Audio - device pci 1c.0 off end # PCIe Port #1 - device pci 1c.2 on end # PCIe Port #3 - LAN (becomes RP1) - device pci 1c.3 on end # PCIe Port #4 - WLAN (becomes RP2) - device pci 1f.3 on end # SMBus +# chip soc/intel/broadwell/pch + register "sata_devslp_disable" = "0x1" + + register "sio_i2c0_voltage" = "1" # 1.8V + register "sio_i2c1_voltage" = "0" # 3.3V + + # DTLE DATA / EDGE values + register "sata_port0_gen3_dtle" = "0x5" + register "sata_port1_gen3_dtle" = "0x5" + + # Force enable ASPM for PCIe Port 5 + register "pcie_port_force_aspm" = "0x10" + + # Enable port coalescing + register "pcie_port_coalesce" = "1" + + # Disable PCIe CLKOUT 1,5 and CLKOUT_XDP + register "icc_clock_disable" = "0x01220000" + + device pci 13.0 on end # Smart Sound Audio DSP + device pci 1b.0 off end # High Definition Audio + device pci 1c.0 off end # PCIe Port #1 + device pci 1c.2 on end # PCIe Port #3 - LAN (becomes RP1) + device pci 1c.3 on end # PCIe Port #4 - WLAN (becomes RP2) + device pci 1f.3 on end # SMBus +# end end end diff --git a/src/mainboard/google/auron/variants/gandof/overridetree.cb b/src/mainboard/google/auron/variants/gandof/overridetree.cb index 75c202d..eae7999 100644 --- a/src/mainboard/google/auron/variants/gandof/overridetree.cb +++ b/src/mainboard/google/auron/variants/gandof/overridetree.cb @@ -7,9 +7,11 @@ register "gpu_panel_power_backlight_on_delay" = "500" # 50ms register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms
- # DTLE DATA / EDGE values - register "sata_port0_gen3_dtle" = "0x5" - register "sata_port1_gen3_dtle" = "0x5" - - device domain 0 on end + device domain 0 on +# chip soc/intel/broadwell/pch + # DTLE DATA / EDGE values + register "sata_port0_gen3_dtle" = "0x5" + register "sata_port1_gen3_dtle" = "0x5" +# end + end end diff --git a/src/mainboard/google/auron/variants/lulu/overridetree.cb b/src/mainboard/google/auron/variants/lulu/overridetree.cb index 60aef30..dc70085 100644 --- a/src/mainboard/google/auron/variants/lulu/overridetree.cb +++ b/src/mainboard/google/auron/variants/lulu/overridetree.cb @@ -7,9 +7,11 @@ register "gpu_panel_power_backlight_on_delay" = "70" # 7ms register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms
- # DTLE DATA / EDGE values - register "sata_port0_gen3_dtle" = "0x5" - register "sata_port1_gen3_dtle" = "0x5" - - device domain 0 on end + device domain 0 on +# chip soc/intel/broadwell/pch + # DTLE DATA / EDGE values + register "sata_port0_gen3_dtle" = "0x5" + register "sata_port1_gen3_dtle" = "0x5" +# end + end end diff --git a/src/mainboard/google/auron/variants/samus/overridetree.cb b/src/mainboard/google/auron/variants/samus/overridetree.cb index c5d2747..710fa95 100644 --- a/src/mainboard/google/auron/variants/samus/overridetree.cb +++ b/src/mainboard/google/auron/variants/samus/overridetree.cb @@ -10,30 +10,32 @@ register "gpu_panel_power_backlight_on_delay" = "2000" # 200ms register "gpu_panel_power_backlight_off_delay" = "2000" # 200ms
- register "sata_port0_gen3_tx" = "0x72" - - # Set I2C0 to 1.8V - register "sio_i2c0_voltage" = "1" - - # Force enable ASPM for PCIe Port 3 - register "pcie_port_force_aspm" = "0x04" - register "pcie_port_coalesce" = "1" - - # Disable PCIe CLKOUT 1-5 and CLKOUT_XDP - register "icc_clock_disable" = "0x013b0000" + register "vr_slow_ramp_rate_set" = "3" + register "vr_slow_ramp_rate_enable" = "1"
# Disable S0ix for now register "s0ix_enable" = "0"
- register "vr_slow_ramp_rate_set" = "3" - register "vr_slow_ramp_rate_enable" = "1" - device domain 0 on - device pci 13.0 on end # Smart Sound Audio DSP - device pci 15.3 on end # GSPI0 - device pci 1b.0 off end # High Definition Audio - device pci 1c.0 off end # PCIe Port #1 - device pci 1c.2 on end # PCIe Port #3 - device pci 1d.0 off end # USB2 EHCI +# chip soc/intel/broadwell/pch + register "sata_port0_gen3_tx" = "0x72" + + # Set I2C0 to 1.8V + register "sio_i2c0_voltage" = "1" + + # Force enable ASPM for PCIe Port 3 + register "pcie_port_force_aspm" = "0x04" + register "pcie_port_coalesce" = "1" + + # Disable PCIe CLKOUT 1-5 and CLKOUT_XDP + register "icc_clock_disable" = "0x013b0000" + + device pci 13.0 on end # Smart Sound Audio DSP + device pci 15.3 on end # GSPI0 + device pci 1b.0 off end # High Definition Audio + device pci 1c.0 off end # PCIe Port #1 + device pci 1c.2 on end # PCIe Port #3 + device pci 1d.0 off end # USB2 EHCI +# end end end