[coreboot-gerrit] Change in coreboot[master]: payloads/external/iPXE: Add more Kconfig options

[Patrick Rudolph (Code Review)]

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/20782

Change subject: payloads/external/iPXE: Add more Kconfig options
......................................................................

payloads/external/iPXE: Add more Kconfig options

Add two now options:
* Disable the promt "Press Ctrl+B for the iPXE command line..."
Add a boolean that disable the initial 2 second timeout.

* Include a script that is executed instead of showing a shell
Allows to add a script that will be included into the iPXE ROM.

Tested on Lenovo T500.

Change-Id: Ie1083d8571d9d1f1c7c71659fb6ff0de2eecad0e
Signed-off-by: Patrick Rudolph 
---
M payloads/external/Makefile.inc
M payloads/external/iPXE/Kconfig
M payloads/external/iPXE/Makefile
3 files changed, 58 insertions(+), 3 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/82/20782/1

diff --git a/payloads/external/Makefile.inc b/payloads/external/Makefile.inc
index 6bc1651..d47256e 100644
--- a/payloads/external/Makefile.inc
+++ b/payloads/external/Makefile.inc
@@ -191,7 +191,9 @@
 ifeq ($(CONFIG_BUILD_IPXE),y)
 PXE_ROM_FILE:=payloads/external/iPXE/ipxe/ipxe.rom
 endif
-
+ifeq ($(CONFIG_PXE_ADD_SCRIPT),y)
+PXE_CONFIG_SCRIPT:=$(abspath $(patsubst "%",%,$(CONFIG_PXE_SCRIPT)))
+endif
 ifeq ($(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO),yy)
 IPXE_UART=COM$(call int-add,$(CONFIG_UART_FOR_CONSOLE) 1)
 endif
@@ -200,7 +202,7 @@
 pci$(CONFIG_PXE_ROM_ID).rom-file := $(PXE_ROM_FILE)
 pci$(CONFIG_PXE_ROM_ID).rom-type := raw

-payloads/external/iPXE/ipxe/ipxe.rom ipxe: $(DOTCONFIG)
+payloads/external/iPXE/ipxe/ipxe.rom ipxe: $(DOTCONFIG) $(PXE_CONFIG_SCRIPT)
    $(MAKE) -C payloads/external/iPXE all \
    CROSS_COMPILE="$(CROSS_COMPILE_$(ARCH-ramstage-y))" \
    PXE_ROM_PCI_ID=$(PXE_ROM_PCI_ID) \
@@ -209,4 +211,7 @@
    CONSOLE_SERIAL=$(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO) \
    IPXE_UART=$(IPXE_UART) \
    CONFIG_TTYS0_BAUD=$(CONFIG_TTYS0_BAUD) \
+	CONFIG_SCRIPT=$(PXE_CONFIG_SCRIPT) \
+	CONFIG_HAS_SCRIPT=$(CONFIG_PXE_ADD_SCRIPT) \
+	CONFIG_PXE_NO_PROMT=$(CONFIG_PXE_NO_PROMT) \
    MFLAGS= MAKEFLAGS=
diff --git a/payloads/external/iPXE/Kconfig b/payloads/external/iPXE/Kconfig
index 8211410..e17e731 100644
--- a/payloads/external/iPXE/Kconfig
+++ b/payloads/external/iPXE/Kconfig
@@ -78,5 +78,32 @@

Under GNU/Linux you can run `lspci -nn` to list the IDs of your PCI devices.

+config PXE_NO_PROMT
+	bool "Do not show prompt to boot from PXE"
+	default n
+	depends on BUILD_IPXE
+	help
+	  Dont wait for the user to press Ctrl-B.
+	  The PXE still can be run as it shows up in SeaBIOS's payload list.
+
+config PXE_ADD_SCRIPT
+	bool "Embedded iPXE script for automated provisioning"
+	depends on BUILD_IPXE
+	default n
+	help
+	  Enable to embed a script that is run instead of a iPXE shell.
+
+
+config PXE_SCRIPT
+	string "Embedded iPXE script for automated provisioning"
+	depends on PXE_ADD_SCRIPT
+	default ""
+	help
+	  Path to a script that is embedded into the iPXE binary.
+	  Example: startup.ipxe
+
+	  Uses the ipxe script instead showing the promt:
+	  "Press Ctrl-B to start iPXE..."
+
 endmenu
 endif
diff --git a/payloads/external/iPXE/Makefile b/payloads/external/iPXE/Makefile
index a8b1245..b4b7dbe 100644
--- a/payloads/external/iPXE/Makefile
+++ b/payloads/external/iPXE/Makefile
@@ -54,15 +54,38 @@
    sed 's|#define\s*COMCONSOLE.*|#define COMCONSOLE $(IPXE_UART)|' "$(project_dir)/src/config/serial.h" > "$(project_dir)/src/config/serial.h.tmp"
    sed 's|#define\s*COMSPEED.*|#define COMSPEED $(CONFIG_TTYS0_BAUD)|'  "$(project_dir)/src/config/serial.h.tmp" > "$(project_dir)/src/config/serial.h"
 endif
+ifeq ($(CONFIG_HAS_SCRIPT),$(CONFIG_PXE_NO_PROMT),y)
+	cp "$(project_dir)/src/config/general.h" "$(project_dir)/src/config/general.h.cb"
+endif
+ifeq ($(CONFIG_HAS_SCRIPT),y)
+	sed 's|//#define\s*IMAGE_SCRIPT.*|#define IMAGE_SCRIPT|' "$(project_dir)/src/config/general.h" > "$(project_dir)/src/config/general.h.tmp"
+	mv "$(project_dir)/src/config/general.h.tmp" "$(project_dir)/src/config/general.h"
+endif
+ifeq ($(CONFIG_PXE_NO_PROMT),y)
+	sed 's|#define\s*BANNER_TIMEOUT.*|#define BANNER_TIMEOUT 0|' "$(project_dir)/src/config/general.h" > "$(project_dir)/src/config/general.h.tmp"
+	mv "$(project_dir)/src/config/general.h.tmp" "$(project_dir)/src/config/general.h"
+endif

-build: config
+build: config $(CONFIG_SCRIPT)
+ifeq ($(CONFIG_HAS_SCRIPT),y)
+	echo "    MAKE       $(project_name) $(TAG-y) EMBED=$(CONFIG_SCRIPT)"
+	$(MAKE) -C $(project_dir)/src bin/$(PXE_ROM_PCI_ID).rom EMBED=$(CONFIG_SCRIPT)
+else
    echo "    MAKE       $(project_name) $(TAG-y)"
    $(MAKE) -C $(project_dir)/src bin/$(PXE_ROM_PCI_ID).rom
+endif
    cp $(project_dir)/src/bin/$(PXE_ROM_PCI_ID).rom $(project_dir)/ipxe.rom
 ifeq ($(CONSOLE_SERIAL),yy)
    cp "$(project_dir)/src/config/console.h.cb" "$(project_dir)/src/config/console.h"
    cp "$(project_dir)/src/config/serial.h.cb" "$(project_dir)/src/config/serial.h"
 endif
+ifeq ($(CONFIG_HAS_SCRIPT),y)
+	cp "$(project_dir)/src/config/general.h.cb" "$(project_dir)/src/config/general.h"
+endif
+ifeq ($(CONFIG_PXE_NO_PROMT),y)
+	cp "$(project_dir)/src/config/general.h.cb" "$(project_dir)/src/config/general.h"
+endif
+

clean:
    test -d $(project_dir) && $(MAKE) -C $(project_dir)/src veryclean || exit 0