Scott Chao has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/55134 )
Change subject: mb/google/brya: move MIPI camera setting into overridetree ......................................................................
mb/google/brya: move MIPI camera setting into overridetree
In order to support no MIPI camera variant, move related configuration into variant folder.
BUG=b:188272162 BRANCH=none TEST=build no MIPI camera variant without error
Signed-off-by: Scott Chao scott_chao@wistron.corp-partner.google.com Change-Id: I4e64d078a8e39732ad29443c3b09ca008a7e902f --- M src/mainboard/google/brya/variants/baseboard/devicetree.cb M src/mainboard/google/brya/variants/brya0/overridetree.cb 2 files changed, 84 insertions(+), 86 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/34/55134/1
diff --git a/src/mainboard/google/brya/variants/baseboard/devicetree.cb b/src/mainboard/google/brya/variants/baseboard/devicetree.cb index ddb1ece..c8fd53e 100644 --- a/src/mainboard/google/brya/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/brya/variants/baseboard/devicetree.cb @@ -129,19 +129,7 @@ device domain 0 on device ref igpu on end device ref dtt on end - device ref ipu on - chip drivers/intel/mipi_camera - register "acpi_uid" = "0x50000" - register "acpi_name" = ""IPU0"" - register "device_type" = "INTEL_ACPI_CAMERA_CIO2" - - register "cio2_num_ports" = "1" - register "cio2_lanes_used" = "{4}" # 4 CSI Camera lanes are used - register "cio2_lane_endpoint[0]" = ""^I2C0.CAM0"" - register "cio2_prt[0]" = "2" - device generic 0 on end - end - end + device ref ipu on end device ref tbt_pcie_rp0 on end device ref tbt_pcie_rp1 on end device ref tbt_pcie_rp2 on end @@ -156,78 +144,6 @@ device generic 0 on end end end - - device ref i2c0 on - chip drivers/intel/mipi_camera - register "acpi_hid" = ""OVTI8856"" - register "acpi_uid" = "0" - register "acpi_name" = ""CAM0"" - register "chip_name" = ""Ov 8856 Camera"" - register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - - register "ssdb.lanes_used" = "4" - register "ssdb.link_used" = "0" - register "ssdb.vcm_type" = "0x0C" - register "vcm_name" = ""VCM0"" - register "num_freq_entries" = "2" - register "link_freq[0]" = "360 * MHz" # 360 MHz - register "link_freq[1]" = "180 * MHz" # 180 MHz - register "remote_name" = ""IPU0"" - - register "has_power_resource" = "1" - #Controls - register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" - register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" - - register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" #power_enable_2p8 - register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" #power_enable_1p2 - register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" #reset - - #_ON - register "on_seq.ops_cnt" = "5" - register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" - register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" - register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" - register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" - register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" - - #_OFF - register "off_seq.ops_cnt" = "4" - register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" - register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" - register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" - register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" - - device i2c 10 on end - end - chip drivers/intel/mipi_camera - register "acpi_uid" = "2" - register "acpi_name" = ""VCM0"" - register "chip_name" = ""DW9768 VCM"" - register "device_type" = "INTEL_ACPI_CAMERA_VCM" - - register "pr0" = ""\_SB.PCI0.I2C0.CAM0.PRIC"" - register "vcm_compat" = ""dongwoon,dw9768"" - - device i2c 0C on end - end - chip drivers/intel/mipi_camera - register "acpi_uid" = "1" - register "acpi_name" = ""NVM0"" - register "chip_name" = ""AT24 EEPROM"" - register "device_type" = "INTEL_ACPI_CAMERA_NVM" - - register "pr0" = ""\_SB.PCI0.I2C0.CAM0.PRIC"" - register "nvm_compat" = ""atmel,24c1024"" - - register "nvm_size" = "0x2800" - register "nvm_pagesize" = "0x01" - register "nvm_readonly" = "0x01" - register "nvm_width" = "0x0E" - - device i2c 58 on end - end - end #I2C0 device ref i2c3 on chip drivers/i2c/tpm register "hid" = ""GOOG0005"" diff --git a/src/mainboard/google/brya/variants/brya0/overridetree.cb b/src/mainboard/google/brya/variants/brya0/overridetree.cb index 452e1d8..78fc472 100644 --- a/src/mainboard/google/brya/variants/brya0/overridetree.cb +++ b/src/mainboard/google/brya/variants/brya0/overridetree.cb @@ -116,6 +116,19 @@ device generic 0 on end end end + device ref ipu on + chip drivers/intel/mipi_camera + register "acpi_uid" = "0x50000" + register "acpi_name" = ""IPU0"" + register "device_type" = "INTEL_ACPI_CAMERA_CIO2" + + register "cio2_num_ports" = "1" + register "cio2_lanes_used" = "{4}" # 4 CSI Camera lanes are used + register "cio2_lane_endpoint[0]" = ""^I2C0.CAM0"" + register "cio2_prt[0]" = "2" + device generic 0 on end + end + end device ref cnvi_wifi on chip drivers/wifi/generic register "wake" = "GPE0_PME_B0" @@ -146,7 +159,76 @@ register "property_list[0].integer" = "1" device i2c 1a on end end - end + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTI8856"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM0"" + register "chip_name" = ""Ov 8856 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + register "ssdb.lanes_used" = "4" + register "ssdb.link_used" = "0" + register "ssdb.vcm_type" = "0x0C" + register "vcm_name" = ""VCM0"" + register "num_freq_entries" = "2" + register "link_freq[0]" = "360 * MHz" # 360 MHz + register "link_freq[1]" = "180 * MHz" # 180 MHz + register "remote_name" = ""IPU0"" + + register "has_power_resource" = "1" + #Controls + register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" + register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" + + register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" #power_enable_2p8 + register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" #power_enable_1p2 + register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" #reset + + #_ON + register "on_seq.ops_cnt" = "5" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" + register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" + + #_OFF + register "off_seq.ops_cnt" = "4" + register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + device i2c 10 on end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "2" + register "acpi_name" = ""VCM0"" + register "chip_name" = ""DW9768 VCM"" + register "device_type" = "INTEL_ACPI_CAMERA_VCM" + + register "pr0" = ""\_SB.PCI0.I2C0.CAM0.PRIC"" + register "vcm_compat" = ""dongwoon,dw9768"" + + device i2c 0C on end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "1" + register "acpi_name" = ""NVM0"" + register "chip_name" = ""AT24 EEPROM"" + register "device_type" = "INTEL_ACPI_CAMERA_NVM" + + register "pr0" = ""\_SB.PCI0.I2C0.CAM0.PRIC"" + register "nvm_compat" = ""atmel,24c1024"" + + register "nvm_size" = "0x2800" + register "nvm_pagesize" = "0x01" + register "nvm_readonly" = "0x01" + register "nvm_width" = "0x0E" + + device i2c 58 on end + end + end #I2C0 device ref i2c1 on chip drivers/i2c/hid register "generic.hid" = ""ELAN9050""