[coreboot-gerrit] Change in coreboot[master]: security/intel/stm: Add STM support

[Name of user not set (Code Review)]

Hello Kyösti Mälkki, Werner Zeh, Patrick Rudolph, Aaron Durbin, Sumeet R Pawnikar, Christian Walter, build bot (Jenkins), Patrick Georgi, Martin Roth,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/33234

to look at the new patch set (#31).

Change subject: security/intel/stm: Add STM support
......................................................................

security/intel/stm: Add STM support

This update is a combination of all four of the patches so that the
commit can be done without breaking parts of coreboot.  This possible
breakage is because of the cross-dependencies between the original
separate patches would cause failure because of data structure changes.

security/intel/stm

This directory contains the functions that check and move the STM to the
MSEG, create its page tables, and create the BIOS resource list.

The STM page tables is a six page region located in the MSEG and are
pointed to by the CR3 Offset field in the MSEG header.  The initial
page tables will identity map all memory between 0-4G.  The STM starts
in IA32e mode, which requires page table to exist at startup.

The BIOS resource list defines the resources that the SMI Handler is
allowed to access.  This includes the SMM memory area where the SMI
handler resides and other resources such as I/O devices.  The STM uses
the BIOS resource list to restrict the SMI handler's accesses.

The BIOS resource list is currently located in the same area as the
SMI handler.  This location is shown in the comment section before
smm_load_module in smm_module_loader.c

For more information see:
     SMI Transfer Monitor (STM) User Guide, Intel Corp.,
     August 2015, Rev 1.0, can be found at firmware.intel.com

include/cpu/x86:

Addtions to include/cpu/x86 for STM support.

cpu/x86:

STM Set up - The STM needs to be loaded into the MSEG during BIOS
initialization and the SMM Monitor Control MSR be set to indicate
that an STM is in the system.

cpu/x86/smm:

SMI module loader modifications needed to set up the
SMM descriptors used by the STM during its initialization

Change-Id: If4adcd92c341162630ce1ec357ffcf8a135785ec
Signed-off-by: Eugene D. Myers 
---
M src/cpu/x86/mp_init.c
M src/cpu/x86/smm/smm_module_loader.c
M src/cpu/x86/smm/smm_stub.S
M src/include/cpu/x86/msr.h
M src/include/cpu/x86/smm.h
M src/security/intel/Kconfig
M src/security/intel/Makefile.inc
A src/security/intel/stm/Kconfig
A src/security/intel/stm/Makefile.inc
A src/security/intel/stm/SmmStm.c
A src/security/intel/stm/SmmStm.h
A src/security/intel/stm/StmApi.h
A src/security/intel/stm/StmPlatformResource.c
A src/security/intel/stm/StmPlatformResource.h
A src/security/intel/stm/StmPlatformSmm.c
15 files changed, 2,136 insertions(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/34/33234/31