HAOUAS Elyes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/39056 )
Change subject: mb/gizmosphere/gizmo2: : Drop unmaintained ROMCC board ......................................................................
mb/gizmosphere/gizmo2: : Drop unmaintained ROMCC board
Remove unmaintained and unsupported old ROMCC board. This board wasn't hooked up for build.
Change-Id: Ie86e1d2ad67095065eb736576f86b976c7f13e2b Signed-off-by: Elyes HAOUAS ehaouas@noos.fr --- D src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c D src/mainboard/gizmosphere/gizmo2/Kconfig D src/mainboard/gizmosphere/gizmo2/Kconfig.name D src/mainboard/gizmosphere/gizmo2/Makefile.inc D src/mainboard/gizmosphere/gizmo2/Micron_MT41J128M16JT.spd.hex D src/mainboard/gizmosphere/gizmo2/OemCustomize.c D src/mainboard/gizmosphere/gizmo2/OptionsIds.h D src/mainboard/gizmosphere/gizmo2/acpi/gpe.asl D src/mainboard/gizmosphere/gizmo2/acpi/ide.asl D src/mainboard/gizmosphere/gizmo2/acpi/mainboard.asl D src/mainboard/gizmosphere/gizmo2/acpi/routing.asl D src/mainboard/gizmosphere/gizmo2/acpi/sata.asl D src/mainboard/gizmosphere/gizmo2/acpi/si.asl D src/mainboard/gizmosphere/gizmo2/acpi/sleep.asl D src/mainboard/gizmosphere/gizmo2/acpi/superio.asl D src/mainboard/gizmosphere/gizmo2/acpi/thermal.asl D src/mainboard/gizmosphere/gizmo2/acpi/usb_oc.asl D src/mainboard/gizmosphere/gizmo2/acpi_tables.c D src/mainboard/gizmosphere/gizmo2/board_info.txt D src/mainboard/gizmosphere/gizmo2/buildOpts.c D src/mainboard/gizmosphere/gizmo2/cmos.layout D src/mainboard/gizmosphere/gizmo2/devicetree.cb D src/mainboard/gizmosphere/gizmo2/dsdt.asl D src/mainboard/gizmosphere/gizmo2/irq_tables.c D src/mainboard/gizmosphere/gizmo2/mainboard.c D src/mainboard/gizmosphere/gizmo2/mptable.c D src/mainboard/gizmosphere/gizmo2/romstage.c 27 files changed, 0 insertions(+), 2,698 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/56/39056/1
diff --git a/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c b/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c deleted file mode 100644 index 8fa8ab5..0000000 --- a/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <AGESA.h> -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include <northbridge/amd/agesa/state_machine.h> -#include <FchPlatform.h> -#include <stdlib.h> - -#include "imc.h" - -const BIOS_CALLOUT_STRUCT BiosCallouts[] = -{ - {AGESA_DO_RESET, agesa_Reset }, - {AGESA_READ_SPD, agesa_ReadSpd_from_cbfs }, - {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, - {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, - {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, - {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, - {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } -}; -const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); - -/** - * ALC272 Verb Table - */ -const CODEC_ENTRY Alc272_VerbTbl[] = { - {0x11, 0x411111F0}, // - SPDIF_OUT2 - {0x12, 0x411111F0}, // - DMIC_1/2 - {0x13, 0x411111F0}, // - DMIC_3/4 - {0x14, 0x411111F0}, // Port D - LOUT1 - {0x15, 0x01011050}, // Port A - LOUT2 Explorer 2x DAC - {0x16, 0x411111F0}, // - {0x17, 0x411111F0}, // Port H - MONO - {0x18, 0x01a11840}, // Port B - MIC1 - {0x19, 0x411111F0}, // Port F - MIC2 - {0x1a, 0x01811030}, // Port C - LINE1 - {0x1b, 0x01811020}, // Port E - LINE2 Explorer 2x ADC - {0x1d, 0x40130605}, // - PCBEEP - {0x1e, 0x411111F0}, // - SPDIF_OUT1 - {0x21, 0x01211010}, // Port I - HPOUT - {0xff, 0xffffffff} -}; - -static const CODEC_TBL_LIST CodecTableList[] = -{ - {0x10ec0272, (CODEC_ENTRY*)&Alc272_VerbTbl[0]}, - {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} -}; - -#define FAN_INPUT_INTERNAL_DIODE 0 -#define FAN_INPUT_TEMP0 1 -#define FAN_INPUT_TEMP1 2 -#define FAN_INPUT_TEMP2 3 -#define FAN_INPUT_TEMP3 4 -#define FAN_INPUT_TEMP0_FILTER 5 -#define FAN_INPUT_ZERO 6 -#define FAN_INPUT_DISABLED 7 - -#define FAN_AUTOMODE (1 << 0) -#define FAN_LINEARMODE (1 << 1) -#define FAN_STEPMODE ~(1 << 1) -#define FAN_POLARITY_HIGH (1 << 2) -#define FAN_POLARITY_LOW ~(1 << 2) - -/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */ -#define FREQ_28KHZ 0x0 -#define FREQ_25KHZ 0x1 -#define FREQ_23KHZ 0x2 -#define FREQ_21KHZ 0x3 -#define FREQ_29KHZ 0x4 -#define FREQ_18KHZ 0x5 -#define FREQ_100HZ 0xF7 -#define FREQ_87HZ 0xF8 -#define FREQ_58HZ 0xF9 -#define FREQ_44HZ 0xFA -#define FREQ_35HZ 0xFB -#define FREQ_29HZ 0xFC -#define FREQ_22HZ 0xFD -#define FREQ_14HZ 0xFE -#define FREQ_11HZ 0xFF - -/* Hardware Monitor Fan Control - * Hardware limitation: - * HWM failed to read the input temperature via I2C, - * if other software switches the I2C switch by mistake or intention. - * We recommend using IMC to control Fans, instead of HWM. - */ -static void oem_fan_control(FCH_DATA_BLOCK *FchParams) -{ - /* Enable IMC fan control, the recommended way */ - if (CONFIG(HUDSON_IMC_FWM)) { - imc_reg_init(); - - /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */ - FchParams->Hwm.HwMonitorEnable = TRUE; - FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */ - - FchParams->Imc.ImcEnable = TRUE; - FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */ - FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC, 1 enable IMC, 0 following hw strap setting */ - - LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader); - - /* Thermal Zone Parameter */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e;//6 | BIT3; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM stepping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00; - - /* IMC Fan Policy temperature thresholds */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 50; /*AC0 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 45; /*AC1 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 40; /*AC2 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00; - - /* IMC Fan Policy PWM Settings */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 100; /* AL0 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 99; /* AL1 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 98; /* AL2 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */ - - FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8; - - /* NOTE: - * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage, - * AGESA puts EcDefaultMessage as global data in ROM, so we can't overwrite it. - * So we remove it from AGESA code. Please See FchInitLateHwm. - */ - } else { - /* HWM fan control, the way not recommended */ - FchParams->Imc.ImcEnable = FALSE; - FchParams->Hwm.HwMonitorEnable = TRUE; - FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */ - } -} - -void board_FCH_InitReset(struct sysinfo *cb_NA, FCH_RESET_DATA_BLOCK *FchParams_reset) -{ -} - -void board_FCH_InitEnv(struct sysinfo *cb_NA, FCH_DATA_BLOCK *FchParams_env) -{ - /* Azalia Controller OEM Codec Table Pointer */ - FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]); - - FchParams_env->Imc.ImcEnable = FALSE; - FchParams_env->Hwm.HwMonitorEnable = FALSE; - FchParams_env->Hwm.HwmFchtsiAutoPoll = FALSE;/* 1 enable, 0 disable TSI Auto Polling */ - - /* Fan Control */ - oem_fan_control(FchParams_env); -} diff --git a/src/mainboard/gizmosphere/gizmo2/Kconfig b/src/mainboard/gizmosphere/gizmo2/Kconfig deleted file mode 100644 index 685e271..0000000 --- a/src/mainboard/gizmosphere/gizmo2/Kconfig +++ /dev/null @@ -1,70 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2012 Advanced Micro Devices, Inc. -# Copyright (C) 2013-2014 Sage Electronic Engineering -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# - -config BOARD_GIZMOSPHERE_GIZMO2 - def_bool n - -if BOARD_GIZMOSPHERE_GIZMO2 - -config BOARD_SPECIFIC_OPTIONS - def_bool y - #select ROMCC_BOOTBLOCK - select CPU_AMD_AGESA_FAMILY16_KB - select NORTHBRIDGE_AMD_AGESA_FAMILY16_KB - select SOUTHBRIDGE_AMD_AGESA_YANGTZE - select DEFAULT_POST_ON_LPC - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select HAVE_ACPI_RESUME - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_4096 - select GFXUMA - select HUDSON_IMC_ENABLE - -config MAINBOARD_DIR - string - default "gizmosphere/gizmo2" - -config MAINBOARD_PART_NUMBER - string - default "Gizmo2" - -config HW_MEM_HOLE_SIZEK - hex - default 0x200000 - -config MAX_CPUS - int - default 4 - -config IRQ_SLOT_COUNT - int - default 11 - -config ONBOARD_VGA_IS_PRIMARY - bool - default y - -config HUDSON_LEGACY_FREE - bool - default y - -config DIMM_SPD_SIZE - int - default 128 - -endif # BOARD_GIZMOSPHERE_GIZMO2 diff --git a/src/mainboard/gizmosphere/gizmo2/Kconfig.name b/src/mainboard/gizmosphere/gizmo2/Kconfig.name deleted file mode 100644 index 29688e2..0000000 --- a/src/mainboard/gizmosphere/gizmo2/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -#config BOARD_GIZMOSPHERE_GIZMO2 -# bool"Gizmo2" diff --git a/src/mainboard/gizmosphere/gizmo2/Makefile.inc b/src/mainboard/gizmosphere/gizmo2/Makefile.inc deleted file mode 100644 index 8a24bea..0000000 --- a/src/mainboard/gizmosphere/gizmo2/Makefile.inc +++ /dev/null @@ -1,43 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2012 Advanced Micro Devices, Inc. -# Copyright (C) 2014 Sage Electronic Engineering, LLC -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# - -romstage-y += buildOpts.c -romstage-y += BiosCallOuts.c -romstage-y += OemCustomize.c - -ramstage-y += buildOpts.c -ramstage-y += BiosCallOuts.c -ramstage-y += OemCustomize.c - -## DIMM SPD for on-board memory -SPD_BIN = $(obj)/spd.bin - -# Order of names in SPD_SOURCES is important! -SPD_SOURCES = Micron_MT41J128M16JT - -SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/$(f).spd.hex) - -# Include spd ROM data -$(SPD_BIN): $(SPD_DEPS) - for f in $+; \ - do for c in $$(cat $$f | grep -v ^#); \ - do printf $$(printf '%o' 0x$$c); \ - done; \ - done > $@ - -cbfs-files-y += spd.bin -spd.bin-file := $(SPD_BIN) -spd.bin-type := spd diff --git a/src/mainboard/gizmosphere/gizmo2/Micron_MT41J128M16JT.spd.hex b/src/mainboard/gizmosphere/gizmo2/Micron_MT41J128M16JT.spd.hex deleted file mode 100644 index 510f690..0000000 --- a/src/mainboard/gizmosphere/gizmo2/Micron_MT41J128M16JT.spd.hex +++ /dev/null @@ -1,231 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2014 Sage Electronic Engineering, LLC. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# Gizmo2 has 1GB using 4 Micron_MT41J128M16JT-125 chips -# The datasheet is available at: -# http://download.micron.com/pdf/datasheets/dram/ddr3/2Gb_DDR3_SDRAM.pdf - -# SPD contents for Gizmo2 2GB DDR3 (1600MHz PC3-12800) soldered down - -# 0 Number of SPD Bytes used / Total SPD Size / CRC Coverage -# bits[3:0]: 1 = 128 SPD Bytes Used -# bits[6:4]: 1 = 256 SPD Bytes Total -# bit7 : 0 = CRC covers bytes 0 ~ 125 -11 - -# 1 SPD Revision - -# 0x10 = Revision 1.0 -10 - -# 2 Key Byte / DRAM Device Type -# bits[7:0]: 0x0b = DDR3 SDRAM -0B - -# 3 Key Byte / Module Type -# bits[3:0]: 3 = SO-DIMM -# bits[7:4]: reserved -03 - -# 4 SDRAM CHIP Density and Banks -# bits[3:0]: 3 = 2 Gigabits Total SDRAM capacity per chip -# bits[6:4]: 0 = 3 (8 banks) -# bit7 : reserved -03 - -# 5 SDRAM Addressing -# bits[2:0]: 1 = 10 Column Address Bits -# bits[5:3]: 2 = 14 Row Address Bits -# bits[7:6]: reserved -11 - -# 6 Module Nominal Voltage, VDD -# bit0 : 0 = 1.5 V operable -# bit1 : 0 = NOT 1.35 V operable -# bit2 : 0 = NOT 1.25 V operable -# bits[7:3]: reserved -00 - -# 7 Module Organization -# bits[2:0]: 2 = 16 bits -# bits[5:3]: 0 = 1 Rank -# bits[7:6]: reserved -02 - -# 8 Module Memory Bus Width -# bits[2:0]: 3 = Primary bus width is 64 bits -# bits[4:3]: 0 = 0 bits (no bus width extension) -# bits[7:5]: reserved -03 - -# 9 Fine Timebase (FTB) Dividend / Divisor -# bits[3:0]: 0x02 divisor -# bits[7:4]: 0x05 dividend -# 5/2 = 2.5ps -52 - -# 10 Medium Timebase (MTB) Dividend -# 11 Medium Timebase (MTB) Divisor -# 1 / 8 = .125 ns - used for clock freq of 400 through 1066 MHz -01 08 - -# 12 SDRAM Minimum Cycle Time (tCKmin) -# 0x0a = tCKmin of 1.25 ns = DDR3-1600 (800 MHz clock) -0A - -# 13 Reserved -00 - -# 14 CAS Latencies Supported, Least Significant Byte -# 15 CAS Latencies Supported, Most Significant Byte -# Cas Latencies of 11 - 5 are supported -FE 00 - -# 16 Minimum CAS Latency Time (tAAmin) -# 0x6E = 13.75ns - DDR3-1600K -6E - -# 17 Minimum Write Recovery Time (tWRmin) -# 0x78 = tWR of 15ns - All DDR3 speed grades -78 - -# 18 Minimum RAS# to CAS# Delay Time (tRCDmin) -# 0x6E = 13.75ns - DDR3-1600K -6E - -# 19 Minimum Row Active to Row Active Delay Time (tRRDmin) -# 0x3C = 7.5ns -3C - -# 20 Minimum Row Precharge Delay Time (tRPmin) -# 0x6E = 13.75ns - DDR3-1600K -6E - -# 21 Upper Nibbles for tRAS and tRC -# bits[3:0]: tRAS most significant nibble = 1 (see byte 22) -# bits[7:4]: tRC most significant nibble = 1 (see byte 23) -11 - -# 22 Minimum Active to Precharge Delay Time (tRASmin), LSB -# 0x118 = 35ns - DDR3-1600 (see byte 21) -18 - -# 23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB -# 0x186 = 48.75ns - DDR3-1600K -86 - -# 24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB -# 25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB -# 0x500 = 160ns - for 2 Gigabit chips -00 05 - -# 26 Minimum Internal Write to Read Command Delay Time (tWTRmin) -# 0x3c = 7.5 ns - All DDR3 SDRAM speed bins -3C - -# 27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin) -# 0x3c = 7.5ns - All DDR3 SDRAM speed bins -3C - -# 28 Upper Nibble for tFAWmin -# 29 Minimum Four Activate Window Delay Time (tFAWmin) -# 0x0140 = 40ns - DDR3-1600, 2 KB page size -01 40 - -# 30 SDRAM Optional Feature -# bit0 : 1= RZQ/6 supported -# bit1 : 1 = RZQ/7 supported -# bits[6:2]: reserved -# bit7 : 1 = DLL Off mode supported -83 - -# 31 SDRAM Thermal and Refresh Options -# bit0 : 1 = Temp up to 95c supported -# bit1 : 0 = 85-95c uses 2x refresh rate -# bit2 : 1 = Auto Self Refresh supported -# bit3 : 0 = no on die thermal sensor -# bits[6:4]: reserved -# bit7 : 0 = partial self refresh supported -05 - -# 32 Module Thermal Sensor -# 0 = Thermal sensor not incorporated onto this assembly -00 - -# 33 SDRAM Device Type -# bits[1:0]: 0 = Signal Loading not specified -# bits[3:2]: reserved -# bits[6:4]: 0 = Die count not specified -# bit7 : 0 = Standard Monolithic DRAM Device -00 - -# 34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin) -# 35 Fine Offset for Minimum CAS Latency Time (tAAmin) -# 36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin) -# 37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin) -# 38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin) -00 00 00 00 00 - -# 39 - 59 (reserved) -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 - -# 60 Raw Card Extension, Module Nominal Height -# bits[4:0]: 0 = <= 15mm tall -# bits[7:5]: 0 = raw card revision 0-3 -00 - -# 61 Module Maximum Thickness -# bits[3:0]: 0 = thickness front <= 1mm -# bits[7:4]: 0 = thinkness back <= 1mm -00 - -# 62 Reference Raw Card Used -# bits[4:0]: 0 = Reference Raw card A used -# bits[6:5]: 0 = revision 0 -# bit7 : 0 = Reference raw cards A through AL -00 - -# 63 Address Mapping from Edge Connector to DRAM -# bit0 : 0 = standard mapping (not mirrored) -# bits[7:1]: reserved -00 - -# 64 - 116 (reserved) -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 -00 00 00 00 00 - -# 117 - 118 Module ID: Module Manufacturers JEDEC ID Code -# 0x0001 = AMD -00 01 - -# 119 Module ID: Module Manufacturing Location - oem specified -# 120 Module ID: Module Manufacture Year in BCD -# 0x13 = 2013 -00 13 - -# 121 Module ID: Module Manufacture week -# 0x12 = 12th week -12 - -# 122 - 125: Module Serial Number -53 41 47 45 - -# 126 - 127: Cyclical Redundancy Code -00 00 diff --git a/src/mainboard/gizmosphere/gizmo2/OemCustomize.c b/src/mainboard/gizmosphere/gizmo2/OemCustomize.c deleted file mode 100644 index 6b21f0c..0000000 --- a/src/mainboard/gizmosphere/gizmo2/OemCustomize.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <AGESA.h> -#include <PlatformMemoryConfiguration.h> - -#include <northbridge/amd/agesa/state_machine.h> - -static const PCIe_PORT_DESCRIPTOR PortList[] = { - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 3, 3), - PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 5, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x01, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 1, PCI Device Number 2, ...) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 2, 2), - PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 4, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x02, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 2, PCI Device Number 2, ...) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 1, 1), - PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 3, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x03, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 3, PCI Device Number 2, ...) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 0, 0), - PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 2, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x04, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 4-7, PCI Device Number 4, ...) */ - { - DESCRIPTOR_TERMINATE_LIST, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 4, 7), - PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 1, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x05, 0) - } -}; - -static const PCIe_DDI_DESCRIPTOR DdiList[] = { - /* DP0 to HDMI0/DP */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 8, 11), - PCIE_DDI_DATA_INITIALIZER(ConnectorTypeHDMI, Aux1, Hdp1) - }, - /* DP1 to high-speed edge connector */ - { - DESCRIPTOR_TERMINATE_LIST, - PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 12, 15), - PCIE_DDI_DATA_INITIALIZER(ConnectorTypeDP, Aux2, Hdp2) - }, -}; - -static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { - .Flags = DESCRIPTOR_TERMINATE_LIST, - .SocketId = 0, - .PciePortList = PortList, - .DdiLinkList = DdiList -}; - -void board_BeforeInitReset(struct sysinfo *cb, AMD_RESET_PARAMS *Reset) -{ - FCH_RESET_INTERFACE *FchReset = &Reset->FchInterface; - FchReset->Xhci0Enable = CONFIG(HUDSON_XHCI_ENABLE); - FchReset->Xhci1Enable = FALSE; -} - -void board_BeforeInitEarly(struct sysinfo *cb, AMD_EARLY_PARAMS *InitEarly) -{ - InitEarly->GnbConfig.PcieComplexList = &PcieComplex; -} - -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -static CONST PSO_ENTRY ROMDATA PlatformMemoryTable[] = { - - #define SEED_WL 0x0E - WRITE_LEVELING_SEED( - ANY_SOCKET, CHANNEL_A, ALL_DIMMS, - SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL, - SEED_WL), - - #define SEED_A 0x12 - HW_RXEN_SEED( - ANY_SOCKET, CHANNEL_A, ALL_DIMMS, - SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, - SEED_A), - - NUMBER_OF_DIMMS_SUPPORTED(ANY_SOCKET, ANY_CHANNEL, 1), - NUMBER_OF_CHANNELS_SUPPORTED(ANY_SOCKET, 1), - MOTHER_BOARD_LAYERS(LAYERS_6), - - MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - CKE_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ - ODT_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), - CS_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), - - PSO_END -}; - -void board_BeforeInitPost(struct sysinfo *cb, AMD_POST_PARAMS *InitPost) -{ - InitPost->MemConfig.PlatformMemoryConfiguration = (PSO_ENTRY *)PlatformMemoryTable; -} - -void board_BeforeInitMid(struct sysinfo *cb, AMD_MID_PARAMS *InitMid) -{ - /* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */ - InitMid->GnbMidConfiguration.iGpuVgaMode = 0; -} diff --git a/src/mainboard/gizmosphere/gizmo2/OptionsIds.h b/src/mainboard/gizmosphere/gizmo2/OptionsIds.h deleted file mode 100644 index eaf2442..0000000 --- a/src/mainboard/gizmosphere/gizmo2/OptionsIds.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/** - * @file - * - * IDS Option File - * - * This file is used to switch on/off IDS features. - * - */ -#ifndef _OPTION_IDS_H_ -#define _OPTION_IDS_H_ - -/** - * - * This file generates the defaults tables for the Integrated Debug Support - * Module. The documented build options are imported from a user controlled - * file for processing. The build options for the Integrated Debug Support - * Module are listed below: - * - * IDSOPT_IDS_ENABLED - * IDSOPT_ERROR_TRAP_ENABLED - * IDSOPT_CONTROL_ENABLED - * IDSOPT_TRACING_ENABLED - * IDSOPT_PERF_ANALYSIS - * IDSOPT_ASSERT_ENABLED - * IDS_DEBUG_PORT - * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED - * - **/ - -#define IDSOPT_IDS_ENABLED TRUE -//#define IDSOPT_CONTROL_ENABLED TRUE -//#define IDSOPT_TRACING_ENABLED TRUE -#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE -//#define IDSOPT_PERF_ANALYSIS TRUE -#define IDSOPT_ASSERT_ENABLED TRUE -//#undef IDSOPT_DEBUG_ENABLED -//#define IDSOPT_DEBUG_ENABLED FALSE -//#undef IDSOPT_HOST_SIMNOW -//#define IDSOPT_HOST_SIMNOW FALSE -//#undef IDSOPT_HOST_HDT -//#define IDSOPT_HOST_HDT FALSE -//#define IDS_DEBUG_PORT 0x80 - -#endif diff --git a/src/mainboard/gizmosphere/gizmo2/acpi/gpe.asl b/src/mainboard/gizmosphere/gizmo2/acpi/gpe.asl deleted file mode 100644 index 87b0d21..0000000 --- a/src/mainboard/gizmosphere/gizmo2/acpi/gpe.asl +++ /dev/null @@ -1,74 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -Scope(_GPE) { /* Start Scope GPE */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - /* Notify (_TZ.TZ00, 0x80) */ - } - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.XHC0, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } -} /* End Scope GPE */ diff --git a/src/mainboard/gizmosphere/gizmo2/acpi/ide.asl b/src/mainboard/gizmosphere/gizmo2/acpi/ide.asl deleted file mode 100644 index e7f4625..0000000 --- a/src/mainboard/gizmosphere/gizmo2/acpi/ide.asl +++ /dev/null @@ -1,246 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012-2013 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* No IDE functionality */ - -#if 0 -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - /* save total time of primary PIO master timing to PIO spd0 */ - Store(GTTM(PPTM), PSD0) - /* save total time of primary PIO slave Timing to PIO spd1 */ - Store(GTTM(PPTS), PSD1) - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} -#endif diff --git a/src/mainboard/gizmosphere/gizmo2/acpi/mainboard.asl b/src/mainboard/gizmosphere/gizmo2/acpi/mainboard.asl deleted file mode 100644 index 68609d8..0000000 --- a/src/mainboard/gizmosphere/gizmo2/acpi/mainboard.asl +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Memory related values */ -Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ -Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ -Name(PBLN, 0x0) /* Length of BIOS area */ - -Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ -Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */ -Name(HPBA, 0xFED00000) /* Base address of HPET table */ - -/* Some global data */ -Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ -Name(OSV, Ones) /* Assume nothing */ -Name(PMOD, One) /* Assume APIC */ - -/* AcpiGpe0Blk */ -OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04) - Field(GP0B, ByteAcc, NoLock, Preserve) { - , 11, - USBS, 1, -} diff --git a/src/mainboard/gizmosphere/gizmo2/acpi/routing.asl b/src/mainboard/gizmosphere/gizmo2/acpi/routing.asl deleted file mode 100644 index 1fb4c1d..0000000 --- a/src/mainboard/gizmosphere/gizmo2/acpi/routing.asl +++ /dev/null @@ -1,194 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -#include <arch/acpi.h> -DefinitionBlock ("DSDT.AML", "DSDT", 0x01, OEM_ID, ACPI_TABLE_CREATOR, 0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - F16 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ - /* Bus 0, Dev 1, Func 1 - HDMI Audio Controller */ - Package(){0x0001FFFF, 0, INTB, 0 }, - Package(){0x0001FFFF, 1, INTC, 0 }, - - - /* Bus 0, Dev 2 Func 0,1,2,3,4,5 - PCIe Bridges */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - - /* FCH devices */ - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ - /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ - Package(){0x0012FFFF, 0, INTC, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - - Package(){0x0016FFFF, 0, INTC, 0 }, - Package(){0x0016FFFF, 1, INTB, 0 }, - - /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ - Package(){0x0010FFFF, 0, INTC, 0 }, - Package(){0x0010FFFF, 1, INTB, 0 }, - - /* Bus 0, Dev 17 - SATA controller */ - Package(){0x0011FFFF, 0, INTD, 0 }, - -}) - -Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - F15 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ - Package(){0x0001FFFF, 0, 0, 44 }, - Package(){0x0001FFFF, 1, 0, 45 }, - - /* Bus 0, Dev 2 - PCIe Bridges */ - Package(){0x0002FFFF, 0, 0, 24 }, - Package(){0x0002FFFF, 1, 0, 25 }, - Package(){0x0002FFFF, 2, 0, 26 }, - Package(){0x0002FFFF, 3, 0, 27 }, - - - /* SB devices in APIC mode */ - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ - /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ - Package(){0x0012FFFF, 0, 0, 18 }, - Package(){0x0012FFFF, 1, 0, 17 }, - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 17 }, - - Package(){0x0016FFFF, 0, 0, 18 }, - Package(){0x0016FFFF, 1, 0, 17 }, - - /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ - Package(){0x0010FFFF, 0, 0, 0x12}, - Package(){0x0010FFFF, 1, 0, 0x11}, - - /* Bus 0, Dev 17 - SATA controller */ - Package(){0x0011FFFF, 0, 0, 19 }, - -}) - -Name(PS2, Package(){ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, -}) -Name(APS2, Package(){ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, -}) - -/* GFX */ -Name(PS4, Package(){ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, -}) -Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 24 }, - Package(){0x0000FFFF, 1, 0, 25 }, - Package(){0x0000FFFF, 2, 0, 26 }, - Package(){0x0000FFFF, 3, 0, 27 }, -}) - -/* GPP 0 */ -Name(PS5, Package(){ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, -}) -Name(APS5, Package(){ - Package(){0x0000FFFF, 0, 0, 28 }, - Package(){0x0000FFFF, 1, 0, 29 }, - Package(){0x0000FFFF, 2, 0, 30 }, - Package(){0x0000FFFF, 3, 0, 31 }, -}) - -/* GPP 1 */ -Name(PS6, Package(){ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, -}) -Name(APS6, Package(){ - Package(){0x0000FFFF, 0, 0, 32 }, - Package(){0x0000FFFF, 1, 0, 33 }, - Package(){0x0000FFFF, 2, 0, 34 }, - Package(){0x0000FFFF, 3, 0, 35 }, -}) - -/* GPP 2 */ -Name(PS7, Package(){ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, -}) -Name(APS7, Package(){ - Package(){0x0000FFFF, 0, 0, 36 }, - Package(){0x0000FFFF, 1, 0, 37 }, - Package(){0x0000FFFF, 2, 0, 38 }, - Package(){0x0000FFFF, 3, 0, 39 }, -}) - -/* GPP 3 */ -Name(PS8, Package(){ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, -}) -Name(APS8, Package(){ - Package(){0x0000FFFF, 0, 0, 40 }, - Package(){0x0000FFFF, 1, 0, 41 }, - Package(){0x0000FFFF, 2, 0, 42 }, - Package(){0x0000FFFF, 3, 0, 43 }, -}) diff --git a/src/mainboard/gizmosphere/gizmo2/acpi/sata.asl b/src/mainboard/gizmosphere/gizmo2/acpi/sata.asl deleted file mode 100644 index 6755258..0000000 --- a/src/mainboard/gizmosphere/gizmo2/acpi/sata.asl +++ /dev/null @@ -1,146 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012-2013 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* No SATA functionality */ - -#if 0 -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} -#endif diff --git a/src/mainboard/gizmosphere/gizmo2/acpi/si.asl b/src/mainboard/gizmosphere/gizmo2/acpi/si.asl deleted file mode 100644 index 2923471..0000000 --- a/src/mainboard/gizmosphere/gizmo2/acpi/si.asl +++ /dev/null @@ -1,23 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } -} /* End Scope SI */ diff --git a/src/mainboard/gizmosphere/gizmo2/acpi/sleep.asl b/src/mainboard/gizmosphere/gizmo2/acpi/sleep.asl deleted file mode 100644 index 1225a62..0000000 --- a/src/mainboard/gizmosphere/gizmo2/acpi/sleep.asl +++ /dev/null @@ -1,93 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Wake status package */ -Name(WKST,Package(){Zero, Zero}) - -/* -* _PTS - Prepare to Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2, etc -* -* Exit: -* -none- -* -* The _PTS control method is executed at the beginning of the sleep process -* for S1-S5. The sleeping value is passed to the _PTS control method. This -* control method may be executed a relatively long time before entering the -* sleep state and the OS may abort the operation without notification to -* the ACPI driver. This method cannot modify the configuration or power -* state of any device in the system. -*/ - -External(_SB.APTS, MethodObj) -External(_SB.AWAK, MethodObj) - -Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - Store(7, UPWS) - _SB.APTS(Arg0) -} /* End Method(_PTS) */ - -/* -* _BFS OEM Back From Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* -none- -*/ -Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ -} - -/* -* _WAK System Wake method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* Return package of 2 DWords -* Dword 1 - Status -* 0x00000000 wake succeeded -* 0x00000001 Wake was signaled but failed due to lack of power -* 0x00000002 Wake was signaled but failed due to thermal condition -* Dword 2 - Power Supply state -* if non-zero the effective S-state the power supply entered -*/ -Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - Store(1,USBS) - - _SB.AWAK(Arg0) - - Return(WKST) -} /* End Method(_WAK) */ diff --git a/src/mainboard/gizmosphere/gizmo2/acpi/superio.asl b/src/mainboard/gizmosphere/gizmo2/acpi/superio.asl deleted file mode 100644 index e69de29..0000000 --- a/src/mainboard/gizmosphere/gizmo2/acpi/superio.asl +++ /dev/null diff --git a/src/mainboard/gizmosphere/gizmo2/acpi/thermal.asl b/src/mainboard/gizmosphere/gizmo2/acpi/thermal.asl deleted file mode 100644 index e69de29..0000000 --- a/src/mainboard/gizmosphere/gizmo2/acpi/thermal.asl +++ /dev/null diff --git a/src/mainboard/gizmosphere/gizmo2/acpi/usb_oc.asl b/src/mainboard/gizmosphere/gizmo2/acpi/usb_oc.asl deleted file mode 100644 index c020216..0000000 --- a/src/mainboard/gizmosphere/gizmo2/acpi/usb_oc.asl +++ /dev/null @@ -1,129 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ -/* -#include <arch/acpi.h> -DefinitionBlock ("DSDT.AML", "DSDT", 0x01, OEM_ID, ACPI_TABLE_CREATOR, 0x00010001 - ) - { - #include "usb.asl" - } -*/ - -/* USB overcurrent mapping pins. */ -Name(UOM0, 0) -Name(UOM1, 2) -Name(UOM2, 0) -Name(UOM3, 7) -Name(UOM4, 2) -Name(UOM5, 2) -Name(UOM6, 6) -Name(UOM7, 2) -Name(UOM8, 6) -Name(UOM9, 6) - -/* USB Overcurrent GPEs */ - -#if 0 /* TODO: Update */ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - } - } -} -#endif diff --git a/src/mainboard/gizmosphere/gizmo2/acpi_tables.c b/src/mainboard/gizmosphere/gizmo2/acpi_tables.c deleted file mode 100644 index 20509e9..0000000 --- a/src/mainboard/gizmosphere/gizmo2/acpi_tables.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/acpi.h> -#include <arch/ioapic.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB800 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS, - IO_APIC_ADDR, 0); - - /* TODO: Remove the hardcode */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1, - 0xFEC20000, 24); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1); - /* 1: LINT1 connect to NMI */ - - return current; -} diff --git a/src/mainboard/gizmosphere/gizmo2/board_info.txt b/src/mainboard/gizmosphere/gizmo2/board_info.txt deleted file mode 100644 index b351b8e..0000000 --- a/src/mainboard/gizmosphere/gizmo2/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: eval diff --git a/src/mainboard/gizmosphere/gizmo2/buildOpts.c b/src/mainboard/gizmosphere/gizmo2/buildOpts.c deleted file mode 100644 index 6c405cc..0000000 --- a/src/mainboard/gizmosphere/gizmo2/buildOpts.c +++ /dev/null @@ -1,341 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/** - * @file - * - * AMD User options selection for a Brazos platform solution system - * - * This file is placed in the user's platform directory and contains the - * build option selections desired for that platform. - * - * For Information about this file, see @ref platforminstall. - * - */ - -#include <stdlib.h> -#include <AGESA.h> - -#define INSTALL_FT3_SOCKET_SUPPORT TRUE -#define INSTALL_FAMILY_16_MODEL_0x_SUPPORT TRUE - -#define INSTALL_G34_SOCKET_SUPPORT FALSE -#define INSTALL_C32_SOCKET_SUPPORT FALSE -#define INSTALL_S1G3_SOCKET_SUPPORT FALSE -#define INSTALL_S1G4_SOCKET_SUPPORT FALSE -#define INSTALL_ASB2_SOCKET_SUPPORT FALSE -#define INSTALL_FS1_SOCKET_SUPPORT FALSE -#define INSTALL_FM1_SOCKET_SUPPORT FALSE -#define INSTALL_FP2_SOCKET_SUPPORT FALSE -#define INSTALL_FT1_SOCKET_SUPPORT FALSE -#define INSTALL_AM3_SOCKET_SUPPORT FALSE -#define INSTALL_FM2_SOCKET_SUPPORT FALSE - - -#ifdef BLDOPT_REMOVE_FT3_SOCKET_SUPPORT - #if BLDOPT_REMOVE_FT3_SOCKET_SUPPORT == TRUE - #undef INSTALL_FT3_SOCKET_SUPPORT - #define INSTALL_FT3_SOCKET_SUPPORT FALSE - #endif -#endif - -//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE -//#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE -//#define BLDOPT_REMOVE_ECC_SUPPORT TRUE -//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE -//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE -#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE -#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE -#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE -//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE -#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE -//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE -#define BLDOPT_REMOVE_SRAT FALSE //TRUE -#define BLDOPT_REMOVE_SLIT FALSE //TRUE -#define BLDOPT_REMOVE_WHEA FALSE //TRUE -#define BLDOPT_REMOVE_CRAT TRUE -#define BLDOPT_REMOVE_CDIT TRUE -#define BLDOPT_REMOVE_DMI TRUE -//#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE - -//This element selects whether P-States should be forced to be independent, -// as reported by the ACPI _PSD object. For single-link processors, -// setting TRUE for OS to support this feature. - -//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE - -#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS -#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER -/* Build configuration values here. - */ -#define BLDCFG_VRM_CURRENT_LIMIT 15000 -#define BLDCFG_VRM_NB_CURRENT_LIMIT 13000 -#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 21000 -#define BLDCFG_VRM_SVI_OCP_LEVEL BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT -#define BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT 17000 -#define BLDCFG_VRM_NB_SVI_OCP_LEVEL BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT -#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 -#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 0 -#define BLDCFG_VRM_SLEW_RATE 10000 -#define BLDCFG_VRM_NB_SLEW_RATE BLDCFG_VRM_SLEW_RATE -#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE - -#define BLDCFG_PLAT_NUM_IO_APICS 3 -#define BLDCFG_GNB_IOAPIC_ADDRESS 0xFEC20000 -#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST -#define BLDCFG_MEM_INIT_PSTATE 0 -#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770 // Specifies the IO addresses trapped by the - // core for C-state entry requests. A value - // of 0 in this field specifies that the core - // does not trap any IO addresses for C-state entry. - // Values greater than 0xFFF8 results in undefined behavior. -#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770 - -#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE - -#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1866_FREQUENCY -#define BLDCFG_MEMORY_MODE_UNGANGED TRUE -#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE -#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE -#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE -#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE -#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE -#define BLDCFG_MEMORY_POWER_DOWN TRUE -#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT -#define BLDCFG_ONLINE_SPARE FALSE -#define BLDCFG_BANK_SWIZZLE TRUE -#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO -#define BLDCFG_MEMORY_CLOCK_SELECT DDR1866_FREQUENCY -#define BLDCFG_DQS_TRAINING_CONTROL TRUE -#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE -#define BLDCFG_USE_BURST_MODE FALSE -#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE -#define BLDCFG_ENABLE_ECC_FEATURE TRUE -#define BLDCFG_ECC_REDIRECTION FALSE -#define BLDCFG_SCRUB_DRAM_RATE 0 -#define BLDCFG_SCRUB_L2_RATE 0 -#define BLDCFG_SCRUB_L3_RATE 0 -#define BLDCFG_SCRUB_IC_RATE 0 -#define BLDCFG_SCRUB_DC_RATE 0 -#define BLDCFG_ECC_SYNC_FLOOD TRUE -#define BLDCFG_ECC_SYMBOL_SIZE 4 -#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000ul -#define BLDCFG_1GB_ALIGN FALSE -#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED -#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO -#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeDisabled -#define BLDCFG_IOMMU_SUPPORT FALSE -#define OPTION_GFX_INIT_SVIEW FALSE -//#define BLDCFG_PLATFORM_POWER_POLICY_MODE BatteryLife - -//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL OEM_LCD_BACK_LIGHT_CONTROL -#define BLDCFG_CFG_ABM_SUPPORT TRUE - -#define BLDCFG_CFG_GNB_HD_AUDIO TRUE -//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID -//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID -//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID - -#ifdef PCIEX_BASE_ADDRESS -#define BLDCFG_PCI_MMIO_BASE PCIEX_BASE_ADDRESS -#define BLDCFG_PCI_MMIO_SIZE (PCIEX_LENGTH >> 20) -#endif - -#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P' -#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' -#define BLDCFG_PCIE_TRAINING_ALGORITHM PcieTrainingDistributed - -/* Process the options... - * This file include MUST occur AFTER the user option selection settings - */ -/* - * Customized OEM build configurations for FCH component - */ -// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00 -// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20 -// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00 -// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400 -// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404 -// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408 -// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410 -// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420 -// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000 -// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000 -// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000 -// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0 -// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00 -// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000 -// #define BLDCFG_AZALIA_SSID 0x780D1022 -// #define BLDCFG_SMBUS_SSID 0x780B1022 -// #define BLDCFG_IDE_SSID 0x780C1022 -// #define BLDCFG_SATA_AHCI_SSID 0x78011022 -// #define BLDCFG_SATA_IDE_SSID 0x78001022 -// #define BLDCFG_SATA_RAID5_SSID 0x78031022 -// #define BLDCFG_SATA_RAID_SSID 0x78021022 -// #define BLDCFG_EHCI_SSID 0x78081022 -// #define BLDCFG_OHCI_SSID 0x78071022 -// #define BLDCFG_LPC_SSID 0x780E1022 -// #define BLDCFG_SD_SSID 0x78061022 -// #define BLDCFG_XHCI_SSID 0x78121022 -// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE -// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE -// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4 -// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE -// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE -// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE -// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE - -CONST AP_MTRR_SETTINGS ROMDATA KabiniApMtrrSettingsList[] = -{ - { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E }, - { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E }, - { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 }, - { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 }, - { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 }, - { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 }, - { CPU_LIST_TERMINAL } -}; - -#define BLDCFG_AP_MTRR_SETTINGS_LIST &KabiniApMtrrSettingsList - -/* Include the files that instantiate the configuration definitions. */ -#include "cpuRegisters.h" -#include "cpuFamRegisters.h" -#include "cpuFamilyTranslation.h" -#include "AdvancedApi.h" -#include "heapManager.h" -#include "CreateStruct.h" -#include "cpuFeatures.h" -#include "Table.h" -#include "cpuEarlyInit.h" -#include "cpuLateInit.h" -#include "GnbInterface.h" - - // This is the delivery package title, "BrazosPI" - // This string MUST be exactly 8 characters long -#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} - - // This is the release version number of the AGESA component - // This string MUST be exactly 12 characters long -#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '} - -/* MEMORY_BUS_SPEED */ -//#define DDR400_FREQUENCY 200 ///< DDR 400 -//#define DDR533_FREQUENCY 266 ///< DDR 533 -//#define DDR667_FREQUENCY 333 ///< DDR 667 -//#define DDR800_FREQUENCY 400 ///< DDR 800 -//#define DDR1066_FREQUENCY 533 ///< DDR 1066 -//#define DDR1333_FREQUENCY 667 ///< DDR 1333 -//#define DDR1600_FREQUENCY 800 ///< DDR 1600 -//#define DDR1866_FREQUENCY 933 ///< DDR 1866 -//#define DDR2100_FREQUENCY 1050 ///< DDR 2100 -//#define DDR2133_FREQUENCY 1066 ///< DDR 2133 -//#define DDR2400_FREQUENCY 1200 ///< DDR 2400 -//#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency -// -///* QUANDRANK_TYPE*/ -//#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM -//#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM -// -///* USER_MEMORY_TIMING_MODE */ -//#define TIMING_MODE_AUTO 0 ///< Use best rate possible -//#define TIMING_MODE_LIMITED 1 ///< Set user top limit -//#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed -// -///* POWER_DOWN_MODE */ -//#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode -//#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode - -/* - * Agesa optional capabilities selection. - * Uncomment and mark FALSE those features you wish to include in the build. - * Comment out or mark TRUE those features you want to REMOVE from the build. - */ - -#define DFLT_SMBUS0_BASE_ADDRESS 0xB00 -#define DFLT_SMBUS1_BASE_ADDRESS 0xB20 -#define DFLT_SIO_PME_BASE_ADDRESS 0xE00 -#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800 -#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804 -#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808 -#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810 -#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820 -#define DFLT_SPI_BASE_ADDRESS 0xFEC10000 -#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 -#define DFLT_HPET_BASE_ADDRESS 0xFED00000 -#define DFLT_SMI_CMD_PORT 0xB0 -#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 -#define DFLT_GEC_BASE_ADDRESS 0xFED61000 -#define DFLT_AZALIA_SSID 0x780D1022 -#define DFLT_SMBUS_SSID 0x780B1022 -#define DFLT_IDE_SSID 0x780C1022 -#define DFLT_SATA_AHCI_SSID 0x78011022 -#define DFLT_SATA_IDE_SSID 0x78001022 -#define DFLT_SATA_RAID5_SSID 0x78031022 -#define DFLT_SATA_RAID_SSID 0x78021022 -#define DFLT_EHCI_SSID 0x78081022 -#define DFLT_OHCI_SSID 0x78071022 -#define DFLT_LPC_SSID 0x780E1022 -#define DFLT_SD_SSID 0x78061022 -#define DFLT_XHCI_SSID 0x78121022 -#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE -#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE -#define DFLT_FCH_GPP_LINK_CONFIG PortA4 -#define DFLT_FCH_GPP_PORT0_PRESENT FALSE -#define DFLT_FCH_GPP_PORT1_PRESENT FALSE -#define DFLT_FCH_GPP_PORT2_PRESENT FALSE -#define DFLT_FCH_GPP_PORT3_PRESENT FALSE -#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE -#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE -#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE -#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE -//#define BLDCFG_IR_PIN_CONTROL 0x33 - -GPIO_CONTROL gizmo2_gpio[] = { - {183, Function1, GpioIn | GpioOutEnB | PullUpB}, - {-1} -}; -//#define BLDCFG_FCH_GPIO_CONTROL_LIST (&gizmo2_gpio[0]) - -// The following definitions specify the default values for various parameters in which there are -// no clearly defined defaults to be used in the common file. The values below are based on product -// and BKDG content, please consult the AGESA Memory team for consultation. -#define DFLT_SCRUB_DRAM_RATE (0) -#define DFLT_SCRUB_L2_RATE (0) -#define DFLT_SCRUB_L3_RATE (0) -#define DFLT_SCRUB_IC_RATE (0) -#define DFLT_SCRUB_DC_RATE (0) -#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define DFLT_VRM_SLEW_RATE (5000) - -#include <PlatformInstall.h> diff --git a/src/mainboard/gizmosphere/gizmo2/cmos.layout b/src/mainboard/gizmosphere/gizmo2/cmos.layout deleted file mode 100644 index e1dbd9a..0000000 --- a/src/mainboard/gizmosphere/gizmo2/cmos.layout +++ /dev/null @@ -1,66 +0,0 @@ -#***************************************************************************** -# -# This file is part of the coreboot project. -# -# Copyright (C) 2012 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -#***************************************************************************** - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/gizmosphere/gizmo2/devicetree.cb b/src/mainboard/gizmosphere/gizmo2/devicetree.cb deleted file mode 100644 index e35249e..0000000 --- a/src/mainboard/gizmosphere/gizmo2/devicetree.cb +++ /dev/null @@ -1,59 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2013 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -chip northbridge/amd/agesa/family16kb/root_complex - device cpu_cluster 0 on - chip cpu/amd/agesa/family16kb - device lapic 0 on end - end - end - - device domain 0 on - subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/agesa/family16kb - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x9835 - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # PCIe GFX Bridge - device pci 2.2 on end # PCIe GPP mini PCIe - device pci 2.3 on end # PCIe LAN - device pci 2.4 on end # PCIe x2 to high speed edge connector - device pci 2.5 on end # PCIe x2 to high speed edge connector - end #chip northbridge/amd/agesa/family16kb - - chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on end # SM - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on end # LPC 0x439d - device pci 14.7 on end # SD - end #chip southbridge/amd/agesa/hudson - - chip northbridge/amd/agesa/family16kb - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end - end - - end #domain -end #northbridge/amd/agesa/family16kb/root_complex diff --git a/src/mainboard/gizmosphere/gizmo2/dsdt.asl b/src/mainboard/gizmosphere/gizmo2/dsdt.asl deleted file mode 100644 index c4fc934..0000000 --- a/src/mainboard/gizmosphere/gizmo2/dsdt.asl +++ /dev/null @@ -1,88 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* DefinitionBlock Statement */ -#include <arch/acpi.h> -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - OEM_ID, - ACPI_TABLE_CREATOR, - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Globals for the platform */ - #include "acpi/mainboard.asl" - - /* Describe the USB Overcurrent pins */ - #include "acpi/usb_oc.asl" - - /* PCI IRQ mapping for the Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/pcie.asl> - - /* Describe the processor tree (_PR) */ - #include <cpu/amd/agesa/family16kb/acpi/cpu.asl> - - /* Contains the supported sleep states for this chipset */ - #include <southbridge/amd/common/acpi/sleepstates.asl> - - /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ - #include "acpi/sleep.asl" - - /* System Bus */ - Scope(_SB) { /* Start _SB scope */ - /* global utility methods expected within the _SB scope */ - #include <arch/x86/acpi/globutil.asl> - - /* Describe IRQ Routing mapping for this platform (within the _SB scope) */ - #include "acpi/routing.asl" - - Device(PWRB) { - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) - Name(_STA, 0x0B) - } - - Device(PCI0) { - /* Describe the AMD Northbridge */ - #include <northbridge/amd/agesa/family16kb/acpi/northbridge.asl> - - /* Describe the AMD Fusion Controller Hub Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/fch.asl> - } - - /* Describe PCI INT[A-H] for the Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/pci_int.asl> - - } /* End _SB scope */ - - /* Describe SMBUS for the Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/smbus.asl> - - /* Define the General Purpose Events for the platform */ - #include "acpi/gpe.asl" - - /* Define the Thermal zones and methods for the platform */ - #include "acpi/thermal.asl" - - /* Define the System Indicators for the platform */ - #include "acpi/si.asl" -} -/* End of ASL file */ diff --git a/src/mainboard/gizmosphere/gizmo2/irq_tables.c b/src/mainboard/gizmosphere/gizmo2/irq_tables.c deleted file mode 100644 index 530c132..0000000 --- a/src/mainboard/gizmosphere/gizmo2/irq_tables.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = 0; - pirq->rtr_devfn = PCI_DEVFN(0x14, 4); - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/gizmosphere/gizmo2/mainboard.c b/src/mainboard/gizmosphere/gizmo2/mainboard.c deleted file mode 100644 index a6c1a6d..0000000 --- a/src/mainboard/gizmosphere/gizmo2/mainboard.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * Copyright (C) 2014 Sage Electronic Engineering, LLC - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <southbridge/amd/agesa/hudson/pci_devs.h> -#include <southbridge/amd/agesa/hudson/amd_pci_int_defs.h> -#include <southbridge/amd/common/amd_pci_util.h> -#include <northbridge/amd/agesa/family16kb/pci_devs.h> - -/*********************************************************** - * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01. - * This table is responsible for physically routing the PIC and - * IOAPIC IRQs to the different PCI devices on the system. It - * is read and written via registers 0xC00/0xC01 as an - * Index/Data pair. These values are chipset and mainboard - * dependent and should be updated accordingly. - * - * These values are used by the PCI configuration space, - * MP Tables. TODO: Make ACPI use these values too. - */ -static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = { - /* INTA# - INTH# */ - [0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B, - /* Misc-nil,0,1,2, INT from Serial irq */ - [0x08] = 0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, - /* SCI, SMBUS0, ASF, HDA, FC, RSVD, PerMon, SD */ - [0x10] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, - /* IMC INT0 - 5 */ - [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, - /* USB Devs 18/19/22 INTA-C */ - [0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B, - /* SATA */ - [0x41] = 0x0F, -}; - -static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = { - /* INTA# - INTH# */ - [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, - /* Misc-nil,0,1,2, INT from Serial irq */ - [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, - /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon, SD */ - [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F, - /* IMC INT0 - 5 */ - [0x20] = 0x05,0x1F,0x1F,0x1F,0x1F,0x1F, - /* USB Devs 18/19/20/22 INTA-C */ - [0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12, - /* SATA */ - [0x41] = 0x13 -}; - -/* - * This table defines the index into the picr/intr_data - * tables for each device. Any enabled device and slot - * that uses hardware interrupts should have an entry - * in this table to define its index into the FCH - * PCI_INTR register 0xC00/0xC01. This index will define - * the interrupt that it should use. Putting PIRQ_A into - * the PIN A index for a device will tell that device to - * use PIC IRQ 10 if it uses PIN A for its hardware INT. - */ -static const struct pirq_struct mainboard_pirq_data[] = { - /* {PCI_devfn, {PIN A, PIN B, PIN C, PIN D}}, */ - {GFX_DEVFN, {PIRQ_A, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* VGA: 01.0 */ - {ACTL_DEVFN,{PIRQ_NC, PIRQ_B, PIRQ_NC, PIRQ_NC}}, /* Audio: 01.1 */ - {NB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* x4 PCIe: 02.1 */ - {NB_PCIE_PORT2_DEVFN, {PIRQ_B, PIRQ_C, PIRQ_D, PIRQ_A}}, /* mPCIe: 02.2 */ - {NB_PCIE_PORT3_DEVFN, {PIRQ_C, PIRQ_D, PIRQ_A, PIRQ_B}}, /* NIC: 02.3 */ - {NB_PCIE_PORT4_DEVFN, {PIRQ_D, PIRQ_A, PIRQ_B, PIRQ_C}}, /* Edge: 02.4 */ - {NB_PCIE_PORT5_DEVFN, {PIRQ_E, PIRQ_F, PIRQ_G, PIRQ_H}}, /* Edge: 02.5 */ - {XHCI_DEVFN, {PIRQ_C, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* XHCI: 10.0 */ - {SATA_DEVFN, {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SATA: 11.0 */ - {OHCI1_DEVFN, {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1: 12.0 */ - {EHCI1_DEVFN, {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1: 12.2 */ - {OHCI2_DEVFN, {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2: 13.0 */ - {EHCI2_DEVFN, {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2: 13.2 */ - {SMBUS_DEVFN, {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS: 14.0 */ - {HDA_DEVFN, {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* HDA: 14.2 */ - {SD_DEVFN, {PIRQ_SD, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SD: 14.7 */ -}; - -const u8 *picr_data = mainboard_picr_data; -const u8 *intr_data = mainboard_intr_data; - -/* PIRQ Setup */ -static void pirq_setup(void) -{ - pirq_data_ptr = mainboard_pirq_data; - pirq_data_size = sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct); - intr_data_ptr = mainboard_intr_data; - picr_data_ptr = mainboard_picr_data; -} - -/********************************************** - * enable the dedicated function in mainboard. - **********************************************/ -static void mainboard_enable(struct device *dev) -{ - printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); - /* Initialize the PIRQ data structures for consumption */ - pirq_setup(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/gizmosphere/gizmo2/mptable.c b/src/mainboard/gizmosphere/gizmo2/mptable.c deleted file mode 100644 index e4edc5f..0000000 --- a/src/mainboard/gizmosphere/gizmo2/mptable.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <stdint.h> -#include <cpu/x86/lapic.h> -#include <southbridge/amd/common/amd_pci_util.h> -#include <drivers/generic/ioapic/chip.h> - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - /* - * By the time this function gets called, the IOAPIC registers - * have been written so they can be read to get the correct - * APIC ID and Version - */ - u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24); - u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF); - - /* Initialize the MP_Table */ - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - /* - * Type 0: Processor Entries: - * LAPIC ID, LAPIC Version, CPU Flags:EN/BP, - * CPU Signature (Stepping, Model, Family), - * Feature Flags - */ - smp_write_processors(mc); - - /* - * Type 1: Bus Entries: - * Bus ID, Bus Type - */ - mptable_write_buses(mc, NULL, &bus_isa); - - /* - * Type 2: I/O APICs: - * APIC ID, Version, APIC Flags:EN, Address - */ - smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR); - - /* - * Type 3: I/O Interrupt Table Entries: - * Int Type, Int Polarity, Int Level, Source Bus ID, - * Source Bus IRQ, Dest APIC ID, Dest PIN# - */ - mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); - - /* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin)) - - /* APU Internal Graphic Device */ - PCI_INT(0x0, 0x01, 0x0, intr_data_ptr[PIRQ_C]); - PCI_INT(0x0, 0x01, 0x1, intr_data_ptr[PIRQ_D]); - - /* SMBUS / ACPI */ - PCI_INT(0x0, 0x14, 0x0, intr_data_ptr[PIRQ_SMBUS]); - - /* Southbridge HD Audio */ - PCI_INT(0x0, 0x14, 0x2, intr_data_ptr[PIRQ_HDA]); - - /* LPC */ - PCI_INT(0x0, 0x14, 0x3, intr_data_ptr[PIRQ_C]); - - /* USB */ - PCI_INT(0x0, 0x12, 0x0, intr_data_ptr[PIRQ_OHCI1]); - PCI_INT(0x0, 0x12, 0x2, intr_data_ptr[PIRQ_EHCI1]); - PCI_INT(0x0, 0x13, 0x0, intr_data_ptr[PIRQ_OHCI2]); - PCI_INT(0x0, 0x13, 0x2, intr_data_ptr[PIRQ_EHCI2]); - PCI_INT(0x0, 0x16, 0x0, intr_data_ptr[PIRQ_OHCI3]); - PCI_INT(0x0, 0x16, 0x2, intr_data_ptr[PIRQ_EHCI3]); - PCI_INT(0x0, 0x14, 0x2, intr_data_ptr[PIRQ_OHCI4]); - - /* SATA */ - PCI_INT(0x0, 0x11, 0x0, intr_data_ptr[PIRQ_SATA]); - - /* on board NIC & Slot PCIE */ - PCI_INT(0x1, 0x0, 0x0, intr_data_ptr[PIRQ_E]); - PCI_INT(0x2, 0x0, 0x0, intr_data_ptr[PIRQ_F]); - - /* PCI slots */ - struct device *dev = pcidev_on_root(0x14, 4); - if (dev && dev->enabled) { - u8 bus_pci = dev->link_list->secondary; - /* PCI_SLOT 0 */ - PCI_INT(bus_pci, 0x5, 0x0, intr_data_ptr[PIRQ_E]); - PCI_INT(bus_pci, 0x5, 0x1, intr_data_ptr[PIRQ_F]); - PCI_INT(bus_pci, 0x5, 0x2, intr_data_ptr[PIRQ_G]); - PCI_INT(bus_pci, 0x5, 0x3, intr_data_ptr[PIRQ_H]); - - /* PCI_SLOT 1 */ - PCI_INT(bus_pci, 0x6, 0x0, intr_data_ptr[PIRQ_F]); - PCI_INT(bus_pci, 0x6, 0x1, intr_data_ptr[PIRQ_G]); - PCI_INT(bus_pci, 0x6, 0x2, intr_data_ptr[PIRQ_H]); - PCI_INT(bus_pci, 0x6, 0x3, intr_data_ptr[PIRQ_E]); - - /* PCI_SLOT 2 */ - PCI_INT(bus_pci, 0x7, 0x0, intr_data_ptr[PIRQ_G]); - PCI_INT(bus_pci, 0x7, 0x1, intr_data_ptr[PIRQ_H]); - PCI_INT(bus_pci, 0x7, 0x2, intr_data_ptr[PIRQ_E]); - PCI_INT(bus_pci, 0x7, 0x3, intr_data_ptr[PIRQ_F]); - - PCI_INT(bus_pci, 0x0, 0x0, intr_data_ptr[PIRQ_C]); - PCI_INT(bus_pci, 0x0, 0x1, intr_data_ptr[PIRQ_D]); - PCI_INT(bus_pci, 0x0, 0x2, intr_data_ptr[PIRQ_E]); - } - - /* PCIe Lan*/ - PCI_INT(0x0, 0x06, 0x0, intr_data_ptr[PIRQ_D]); - - /* FCH PCIe PortA */ - PCI_INT(0x0, 0x15, 0x0, intr_data_ptr[PIRQ_A]); - /* FCH PCIe PortB */ - PCI_INT(0x0, 0x15, 0x1, intr_data_ptr[PIRQ_B]); - /* FCH PCIe PortC */ - PCI_INT(0x0, 0x15, 0x2, intr_data_ptr[PIRQ_C]); - /* FCH PCIe PortD */ - PCI_INT(0x0, 0x15, 0x3, intr_data_ptr[PIRQ_D]); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/gizmosphere/gizmo2/romstage.c b/src/mainboard/gizmosphere/gizmo2/romstage.c deleted file mode 100644 index 6312270..0000000 --- a/src/mainboard/gizmosphere/gizmo2/romstage.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <amdblocks/acpimmio.h> -#include <arch/io.h> -#include <device/pci_ops.h> -#include <northbridge/amd/agesa/state_machine.h> -#include <southbridge/amd/agesa/hudson/hudson.h> - -void board_BeforeAgesa(struct sysinfo *cb) -{ - /* For serial port option, plug-in card on LPC. */ - pci_devfn_t dev = PCI_DEV(0, 0x14, 3); - pci_write_config32(dev, 0x44, 0xff03ffd5); - - /* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for - * LpcClk[1:0]". To be consistent with Parmer, setting to 4mA - * even though the register is not documented in the Kabini BKDG. - * Otherwise the serial output is bad code. - */ - pm_io_write8(0xd2, 0); -}